[Q] [HELP] My sgs3 won't boot ! (mobile odin) - Galaxy S III Q&A, Help & Troubleshooting

I used mobile odin to install stock firmwarew to my sgs3. All gone wrong after i tapped the flash firmware button. From there tries to flash the firmware and doesn't stop. It flashes firmware reboots flashes firmware reboot.
Some help?

Sex*Time said:
I used mobile odin to install stock firmwarew to my sgs3. All gone wrong after i tapped the flash firmware button. From there tries to flash and doesn't stop. It flashes reboots flashes reboot.
Some help?
Click to expand...
Click to collapse
TaKE BATTERY OUT THEN POST WHAT FIRMWARE .
JJE

What Rom were you previously on, and which Rom did you flash

ROM
I had leaked rooted android 4.2 and i tried to install official 4.1.2 regovery mode either just in download mode.ion CNX (vodafone romania) ,
It doesn't enter in recovery mode either , just in download mode.

Sex*Time said:
I had leaked rooted android 4.2 and i tried to install official 4.1.2
Click to expand...
Click to collapse
Do data wipe/factory reset, necessary when moving between versions

It doesn't enter in recovery mode
It doesn't enter in recovery mode, just download mode.

Sex*Time said:
It doesn't enter in recovery mode, just download mode.
Click to expand...
Click to collapse
Flash a stock Rom with Odin then

Thanks but one more question.
slaphead20 said:
Flash a stock Rom with Odin then
Click to expand...
Click to collapse
I am flashing with odin right now but the flash counter?
I will have to do it with mobile odin from the begining right?
P.S> : I want to go to the warranty with it for unlocking.

Sex*Time said:
I am flashing with odin right now but the flash counter?
I will have to do it with mobile odin from the begining right?
P.S> : I want to go to the warranty with it for unlocking.
Click to expand...
Click to collapse
Use triangle away before the flash and factory reset from recovery after the flash

Maybe you should think about your name, before you post anything else in these forums...

familyguy59 said:
Maybe you should think about your name, before you post anything else in these forums...
Click to expand...
Click to collapse
Lol.....not the most carefully considered user name in history!

slaphead20 said:
Lol.....not the most carefully considered user name in history!
Click to expand...
Click to collapse
Lol

Related

I can't turn on my GS2!!I can't enter download mode and recoverery mode too!!!!

http://www.flickr.com/photos/[email protected]/6322322723/sizes/l/in/photostream/
http://www.flickr.com/photos/[email protected]/6322322905/in/photostream/lightbox/
I did a wrong step to flash the kernel!!!After that,when I turn on the GS2,It would show these images.Help!!!!!!!!
Cant see ****. More details are required, else you wont get help anywhere. What steps did you follow?
I was using Cm7.1 before.But many problems in that.Therefore,I wanted to flash official ROM again.But I first flash the ZSKG2 Kernel in My GS2!!!!!I should flash the ROM first!!!!!I click a wrong .tar and now I can't turn on it.
Can I use USB JIG to fix it?Or I need to take it to Samsung to fix it?
Tried doing what it says?
Get a usbjig @ usbjig.com
Can you enter download mode? If so enter download mode and flash a fresh firmware..
Sent from my GT-I9100 using xda premium
I can enter download mode now!!!!!!!!!!!How can I do?
I can't enter recovery mode.Is my recovery broken?
alanngai1997 said:
I can enter download mode now!!!!!!!!!!!How can I do?
Click to expand...
Click to collapse
When you're in download mode you can simply use ODIN to flash a new firmware.
Flash the ZSKG2 ROM in it.After that flash the ZSKS2 Kernel in it?
Basically you can flash any ROM now, just make sure that it's for the SGS II and you're good to go.
Use Odin 1.85 to flash it?
alanngai1997 said:
Use Odin 1.85 to flash it?
Click to expand...
Click to collapse
That's right.
Sent from my GT-I9100 using Tapatalk
First,flash the CMW Kernel?Or direct flash the ZSKG2?
alanngai1997 said:
I can enter download mode now!!!!!!!!!!!How can I do?
Click to expand...
Click to collapse
If you can go to Download mode then search for your official firmware (see here: http://forum.xda-developers.com/showthread.php?t=1075278)
And flash as usual using Odin.
It will bring back your phone to the usual one (without root etc.)
You can flash other official firmwares as well.
Mine was 2.3.3 DXKI2 previously, my country have not released the 2.3.5 officially, so I just took the latest XWKI8 and flashed it.
alanngai1997 said:
First,flash the CMW Kernel?Or direct flash the ZSKG2?
Click to expand...
Click to collapse
Directly flash the firmware will do
After that follow the CF-Root if you want to get your root and CWM back.
The Odin v1.85 is no command when I Click the 'Start' button. What's wrong?
http://www.flickr.com/photos/[email protected]/6325674372/lightbox/
Can I flash the CMW Kernel first?
1)What make is you SGS2, is it korean, european or anything else?
2)Can you or can you not get into download mode using the 3 button combo.
3)You need kies on the PC for the phone to communicate with the PC in download mode. But while running odin, all kies processes have to be stopped via windows taskmanager.
4)Pull out your battery for like 15 to 30 mins and then try again.

[Q] messed rom

So its the first time im messing with that staff.i wanted to flash omega rom at my s3. i tried to install but nothing happened so i tried to wipe my cache settings. when i pressed that option my phone stucked. it shows me the galaxy screen, then boots and shows the android icon for a sec and then the same again forever. i put off the battery, powered on the phone and again that problem. Even when its closed and i want to charge it it wont show ths battery icon but will start that boot thing. any ideas?
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
slaphead20 said:
Can you get in download mode? If so then flash stock Rom with Odin.....see the stickies at top of the s3 general forum for all basics
Click to expand...
Click to collapse
Did that, and as Odin programm said i had a succesful installation. Then my phone rebooted and started the same ... :/
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
slaphead20 said:
Can you boot into recovery? If so, do a factory reset, that usually sorts looping after an Odin flash
Click to expand...
Click to collapse
I cant. only download mode. and that happened to me when i tried to do a factory reset
Check the Rom you downloaded,redownload etc etc
slaphead20 said:
Check the Rom you downloaded,redownload etc etc
Click to expand...
Click to collapse
You mean the stock ROM?
The problem i face is that and i cant enter nowhere
Write at youtube: Samsung Galaxy S3 stuck on screen
From Κώστας Καράς. I uploaded it, that's the problem im getting. and cant enter recovery mode
You just said you can get in to download mode?
slaphead20 said:
You just said you can get in to download mode?
Click to expand...
Click to collapse
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
xokeistas25 said:
.i wanted to flash omega rom at my s3. i tried to install but nothing happened
Click to expand...
Click to collapse
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
xokeistas25 said:
I CAN enter download mode. i CANT enter recovery mode.
I entered the download mode, and installed the stock rom via Odin, but nothing happened. I've still the same problem
Click to expand...
Click to collapse
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Unuce said:
How do you mean nothing happened? What happens when you power on the phone after first time flashed the omega rom?
And what happens when you try to hold volume up+home button + power button?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
When i do that, it does NOTHING!
slaphead20 said:
Like I said, check the Rom you downloaded to make sure it's ok, the right one for your region, and redownload just in case it's corrupt
Click to expand...
Click to collapse
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
Now pull battery then insert and try and get in recovery, if you can, then factory reset
slaphead20 said:
Now pull battery then insert and try and get in recovery, if you can, then factory reset
Click to expand...
Click to collapse
As i told you before, i cant. As soon as i press the buttons, it will start that weird thing
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Will you please link to the stock Rom you are trying to flash
xokeistas25 said:
When i do that, it does NOTHING!
Just downloaded stock rom from another link, installed via Odin and when it rebooted, it started the same thing :/
Click to expand...
Click to collapse
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
slaphead20 said:
Will you please link to the stock Rom you are trying to flash
Click to expand...
Click to collapse
I followed this guide http://forum.xda-developers.com/showthread.php?t=2187081
JJEgan said:
Via Odin flash Philz recovery and boot into recovery format sd card system data cache via mounts and storage .
If you cannot then its a service centre repair job .
Are you sure its an I9300 phone check under the battery .
jje
Click to expand...
Click to collapse
Flashed Philz recovery and now its just stuck in the Galaxy i9300 screen with a small red exclamation mark at the top, left corner of the screen, and it keeps rebooting. Still cant enter recovery mode, just download mode.
Unuce said:
It can't do nothing..
When you press power button after flash omega rom, did it powered on?
Sent from my GT-I9300 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
No, i said what's happening after that.
EDIT: A friend of my told me that, i need the appropriate firmware from here: http://www.sammobile.com/firmwares/1/
but with my phone being off i dont know how to find pda, etc

[Q] Galaxy S2 (i9100) stuck at logo screen

I tried rooting my friend's galaxy s2 (i9100) using odin but after it said PASS (on odin) the phone rebooted itself quitting download mode and then got stuck at the logo screen. Is there any way i can fix the phone? I used this file to root : GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
I hope someone can help me with as soon as possible, thanks.
aymanamrani said:
I tried rooting my friend's galaxy s2 (i9100) using odin but after it said PASS (on odin) the phone rebooted itself quitting download mode and then got stuck at the logo screen. Is there any way i can fix the phone? I used this file to root : GT-I9100_JB_ClockworkMod-Recovery_6.0.2.9.tar
I hope someone can help me with as soon as possible, thanks.
Click to expand...
Click to collapse
going to recovery and make wype , problem fixed
nicola1989 said:
going to recovery and make wype , problem fixed
Click to expand...
Click to collapse
I can't go into recovery mode, download mode is the only accessible thing on the phone right now
aymanamrani said:
I can't go into recovery mode, download mode is the only accessible thing on the phone right now
Click to expand...
Click to collapse
on odin, did you click on repartition? if no i think you need to flash it again or try a other rom (or redownload) just to be sure its not the phone
KingOfDope said:
on odin, did you click on repartition? if no i think you need to flash it again or try a other rom (or redownload) just to be sure its not the phone
Click to expand...
Click to collapse
I did NOT click on Re-partition. I did what you have said before (flashed again // tried another rom // redownloaded the file) and the phone is still not working. I don't know what to do anymore. I'm afraid I bricked my friend's phone i was just trying to root it
aymanamrani said:
I did NOT click on Re-partition. I did what you have said before (flashed again // tried another rom // redownloaded the file) and the phone is still not working. I don't know what to do anymore. I'm afraid I bricked my friend's phone i was just trying to root it
Click to expand...
Click to collapse
I don't think its bricked... uhmm try to go back to stock rom
go to sammymobile.com and there you can your pda and stuff... I hope everything is gonna be alright
But why is the recovery mode not accessible?
If you were in the process of rooting only then how have you tried out different roms?
Does flashing a recovery itself cause a bootloop?
dude sometimes mine also not boots into recovery. U can flash siyah kernel 6b5 tar version through odin. that will most likely boot into recovery
sarfaraz1989 said:
dude sometimes mine also not boots into recovery. U can flash siyah kernel 6b5 tar version through odin. that will most likely boot into recovery
Click to expand...
Click to collapse
+1
Flashing Siyah.tar via odin was the way i went. And all was OK!

[Q] phone dead help plzzzz

i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
dexzizo said:
i have an unrooted unlocked samsung galaxy mega 6.3 gt i9200 from china i tried to flash an arabic rom using odin but it didnt work and now the phone is not working how can i fix it
Click to expand...
Click to collapse
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
es0tericcha0s said:
What isn't working? Did it flash successfully but not boot? Just do a factory reset. If it didn't flash completely, then you have to let us know what happened before it failed.
Click to expand...
Click to collapse
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
dexzizo said:
i tried to flash a rom but failed now it says Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again
Click to expand...
Click to collapse
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
es0tericcha0s said:
Ok, so typically when people say they flashed a rom, that means a custom version through a custom recovery. But you said earlier you tried to install through Odin. This is an important distinction. If you tried to flash a custom rom and it didn't work, then flashing the correct stock firmware through Odin will resolve. If you flashed through Odin and it gave you that warning, then you need to find the right one and re-try.
Click to expand...
Click to collapse
Yup what i tried to do is flash an arabic rom instead the Chinese stock one but if failed on the phone it said invalid at the end so if i flashed the Chinese stock one back from odin will it work or not
Yes, flashing the original firmware via Odin should get you working again.
es0tericcha0s said:
Yes, flashing the original firmware via Odin should get you working again.
Click to expand...
Click to collapse
will it work if i used samsung kies recovery
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
es0tericcha0s said:
Possibly, but if the system had already been modified, I find Odin to be a more reliable fix.
Click to expand...
Click to collapse
well i flashed back the old rom and it worked but now i have no signal and there is no sound what can i go and there is 2 red lines on the top when i open the phone even the wifi doesnt work

[Q] Stuck on boot logo - GALAXY Pocket Neo GT-S5310 - Can't access recovery mode

Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
can't delete this reply... could an admin please do it?
Installing cwn recovery and flash rom
D-Moon said:
Hi
I have a Samsung Galaxy Pocket Neo GT-S5310...
The sad thing is that, a while ago it stopped working and now it's stuck on the boot screen (Samsung GALAXY POCKET Neo GT-S5310)
I have tried to perform a factory reset through the built-in recovery mode (volume up + home + power), but unfortunately, I couldn't access the recovery mode and the phone goes directly to the boot screen.
And since the only thing I could do was accessing the Download Mode, so I tried to recover it by installing an official firmware with Odin3_v3.07... but it didn't solve the problem...
So what would you guys suggest?
Click to expand...
Click to collapse
The only way to :cyclops: the problem is to install cwn recovery and flash another rom .
see this thread to install cwn http://forum.xda-developers.com/showthread.php?t=2728655 ::silly:
and try this rom http://forum.xda-developers.com/poc...om-cm-11-0-galaxy-pocket-neo-duos-gt-t2833952
see this thread to find other rom http://forum.xda-developers.com/showthread.php?t=2731774:p
wipe data then flash the original FIRMWARE
Ashish1998 said:
wipe data then flash the original FIRMWARE
Click to expand...
Click to collapse
How can I wipe data if I can't access the recovery mode... :/
D-Moon said:
How can I wipe data if I can't access the recovery mode... :/
Click to expand...
Click to collapse
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
sksenthil said:
hey bro..
:silly: installing cwn recovery via download mode is the only way to bring back ur device
Click to expand...
Click to collapse
actually the only way would be flashing the bootloader, unfortunately I couldn't find it anywhere... the official firmware (from sammobile or samsung-updates) does not contain the bootloader flash...
Download stock from sammobile.com and flash it via Odin
Hackerpunk1 said:
Download stock from sammobile.com and flash it via Odin
Click to expand...
Click to collapse
read my previous reply... :/
D-Moon said:
read my previous reply... :/
Click to expand...
Click to collapse
What are the files in the firmware you downloaded?
Hackerpunk1 said:
What are the files in the firmware you downloaded?
Click to expand...
Click to collapse
S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5
and
SS_DL.dll
Which version of Odin are you using?
Hackerpunk1 said:
Which version of Odin are you using?
Click to expand...
Click to collapse
3.09
Sent from my GT-I9300 using XDA Free mobile app
Just load the file "S5310XXAMK1_S5310OJVAMK3_S5310XXAME1_HOME.tar.md5" ONLY in the PDA section. Please make sure you have the right drivers installed.
stuck in bootloop ...
Hi all, i can't find topic for Samsung s5303, and i have a problem with this device.
someone can help me ?
→ the phone stuck in bootloop ←
- i can start in download mode and get connected in odin.
i had flash all the 12 roms that i have found, (including custom roms and stock roms, only one package/ full package using re-partition with .PIT files. and various kernel models)
i made all wipes, (after and before flash a rom)
when the phone try to boot up, don't appear nothing about
errors (like can't mount data reboot or others...)
the phone try to boot up and keep in samsung logo, after 30 seconds i have a full shutdown, are not possible to turn on using power button..
if i take off the battery and reinsert after 1 minute, phone try to turn on and repeat the same thing
(have happened in all firmwares found)
are a hardware problem ?
may be someone have an idea to fix this issue?
since now, thanks.
Cant boot to recovery
Hi sorry for the thread revival but I have run out of ideas. Same problem as OP. Odin flash is successful but stuck on samsung logo when trying to boot to recovery.
S5310i 4.4.2
Any suggestions would be much appreciated. Anyone found a solution to this?
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Hackerpunk1 said:
When you use Odin to flash, when it has finished, it always boot to recovery, there you have to wipe data and cache, then it works properly!
Click to expand...
Click to collapse
After flashing recovery with odin I am still stuck at the S5310 Neo splash screen unable to boot into recovery. Has this maybe got something to do with a conflict between android versions? As the S3510i comes with 4.4.2 stock, not 4.1.2.
Did you tried using the pit file for re-partitioning?
Hackerpunk1 said:
Did you tried using the pit file for re-partitioning?
Click to expand...
Click to collapse
Thanks for your help. Could you please explain more about this? Where would I find the pit file to flash? Do I tick re-partition in odin? Never flashed pit before. worried about bricking the device.
I am struggling to find the PIT file for my specific device (S5310i). its only on a handful of websites asking for paid subscriptions. Could anybody possible direct me to where I can find:
CORSICAVE3G_EUR_OPEN. Pit
I have downloaded the corsicass.pit and S5310_corsicass.pit but am not sure if this will work on any S5310 variant?

Categories

Resources