I rooted my GN2.
I, also, to my knowledge, have unlocked it according to guide here.
I have access to the p[hone on PC.
I can put phone into recovery, but here's 2 questions:
1. I do not see back up option in recovery
2. I placed JB rom onto the sd card. When in recovery mode, the only option I have is to install from external. That will, actually, show JB zip on sd card. But when I hit install, it goes to : instal./sdcard and that's it.
What am I missing?
baseband i605 vrall4
kernel 3.0.31-414933
build jro03 c i605vraljb
Thank you
ukrkoz said:
I rooted my GN2.
I, also, to my knowledge, have unlocked it according to guide here.
I have access to the p[hone on PC.
I can put phone into recovery, but here's 2 questions:
1. I do not see back up option in recovery
2. I placed JB rom onto the sd card. When in recovery mode, the only option I have is to install from external. That will, actually, show JB zip on sd card. But when I hit install, it goes to : instal./sdcard and that's it.
What am I missing?
baseband i605 vrall4
kernel 3.0.31-414933
build jro03 c i605vraljb
Thank you
Click to expand...
Click to collapse
Sounds like you're so on stock recovery which means you're my unlocked. Did it say TWRP when you boot into recovery?
Sent from my SCH-I605 using Tapatalk 2
Sounds like you're so on stock recovery which means you're my unlocked. Did it say TWRP when you boot into recovery?
Did you mean - It sounds like you are still on stock recovery which means you are not unlocked? No, says nothing, only small Android shows with open heart surgery - little trap door opened with warning sign in it. But I know I am rooted, as Titanium works, and I have Superuser working.
ukrkoz said:
Sounds like you're so on stock recovery which means you're my unlocked. Did it say TWRP when you boot into recovery?
Did you mean - It sounds like you are still on stock recovery which means you are not unlocked? No, says nothing, only small Android shows with open heart surgery - little trap door opened with warning sign in it. But I know I am rooted, as Titanium works, and I have Superuser working.
Click to expand...
Click to collapse
Yes that's what I meant. The Samsung keyboard got me as I typed that in line at walmart.
With what you described you are still on the stock recovery which means your bootloader is still locked. You can be rooted with a locked bootloader so i'm sure you are rooted. You will need to follow Adams guide in original development.
Sent from my SCH-I605 using Tapatalk 2
Well, problem is - I am back to same problem I had yesterday. No matter what I do - antivirus and firewall, shut down, drivers reinstalled, 3 cables including brand new one, trying every usb port possible - Casual will not connect to the p[hone. And I can see phone connected to the PC easy. Have debugging. Does not matter. Spent an hour by now. Disconnected.
Related
ok so i got my replacement thunderbolt and tried to use the 3 step root tool on here and i think something went wrong. i made it to step 3, it says s off and seemed ok. i rebooted, tried to fix permissions to test and it failed. now all i get is the HTC white boot screen and thats it. i can go into bootloader (the screen with hboot, recovery, etc) and i can load up recovery but when i try to do a restore (backup from the old phone) i get an error and it fails. is it screwed? what can i do to correct this? thanks guys!
[email protected]|ice said:
ok so i got my replacement thunderbolt and tried to use the 3 step root tool on here and i think something went wrong. i made it to step 3, it says s off and seemed ok. i rebooted, tried to fix permissions to test and it failed. now all i get is the HTC white boot screen and thats it. i can go into bootloader (the screen with hboot, recovery, etc) and i can load up recovery but when i try to do a restore (backup from the old phone) i get an error and it fails. is it screwed? what can i do to correct this? thanks guys!
Click to expand...
Click to collapse
If you can get into recovery, wipe EVERYTHING (data/cache/dalvik). Then mount USB and put a rom on your SD. Flash that. If you tried to fix permissions BEFORE you installed a ROM, then you kinda skipped a step mate.
DO NOT RERUN THE ROOT METHOD. IF you have S-OFF, jut flash a ROM
cj2566 said:
If you can get into recovery, wipe EVERYTHING (data/cache/dalvik). Then mount USB and put a rom on your SD. Flash that. If you tried to fix permissions BEFORE you installed a ROM, then you kinda skipped a step mate.
DO NOT RERUN THE ROOT METHOD. IF you have S-OFF, jut flash a ROM
Click to expand...
Click to collapse
thank you for the quick reply! so there is some hope for this thing then, woohoo!
yes i have wiped everything you mentioned. how does one mount usb from that menu? from within recovery? i saw a usb option on that (is it called bootloader?) is that what your speaking of?
now as a rom i DO have the gingerjane rom from jcase on there somewhere, is that safe to flash on there to fix this? thanks again!
If you have access to recovery (as you said you do) just load it, wipe, and flash any Thunderbolt rom you put on your sdcard (or already have in your case). Whether the rom you flash will fully works or not depends on whether it is compatible with your current radio.
But as long as you have access to recovery, you are set.
it booted! thank you both.
now im positive the root failed but it says s-off and superuser does show in the app drawer. im gonna try to d/l rom manager since its not on here anymore and see if it works.
if root failed am i safe to do the three step process again?
just don't flash roms with Rom Manager. It's known to cause problems with the Thunderbolt..
[email protected]|ice said:
it booted! thank you both.
now im positive the root failed but it says s-off and superuser does show in the app drawer. im gonna try to d/l rom manager since its not on here anymore and see if it works.
if root failed am i safe to do the three step process again?
Click to expand...
Click to collapse
Not sure what "3 step process" you are referring to but I'm gonna say no.
You have recovery. You can clearly flash roms. The roms contain Superuser.apk and su binaries which means THEY are rooted. Flash a good copy of a rooted rom from recovery and you will have working SU.
If that means you have to download another copy of a rom and put it on your sdcard then do it. Point is, roms are "rooted" not the phone. You can't "root" something that doesn't have an OS. Common misconception but I'm leaving it at that.
Everything is working great now, thank you all for your guidance and support. Love my android community. Can't thank you enough.
I was helping a buddy root his Evo 3D today. We managed to get S-off, but couldn't get Clockwork mod to install. Later I realized that his PC was not recognizing his 3vo. Installed the HTC drivers, still same problem. Installed HTC Sync, still the same. Now I can't do anything to his phone.
To make matters worse, he can't surf online. The phone boots up just fine, and the boot loader is unlocked, but this is where we currently stand.
Try to flash TWRP:
[RECOVERY] [EVO3D] TeamWin Recovery Project
Just dl the .zip file, rename it to PG86IMG.zip, put it on the root of the SD card. Then boot into bootloader (either through adb or take battery out, put back in and hold power + vol down). Then once it loads into bootloader (not fastboot) it will auto detect the .zip and ask you to update. Press vol up to say yes, wait for it to finish.
Now you'll have a working recovery, you can flash other already rooted ROMs using the flash zip utility in the recovery or if you just want to root the default ROM you have to flash this zip file with the 'flash zip' under recovery.
Is there supposed to be a root folder, or do I just simply place the main directory.
We placed the .zip file, after it was renamed into the main directory of the 3vo. Booted into HBOOT, but nothing happened. We were not prompted, just sat there in the HBOOT screen.
Evo-3D said:
Is there supposed to be a root folder, or do I just simply place the main directory.
We placed the .zip file, after it was renamed into the main directory of the 3vo. Booted into HBOOT, but nothing happened. We were not prompted, just sat there in the HBOOT screen.
Click to expand...
Click to collapse
The root of anything is the main directory.
Sent from my HTC Hero making C.R.E.A.M.
dastin1015 said:
The root of anything is the main directory.
Sent from my HTC Hero making C.R.E.A.M.
Click to expand...
Click to collapse
Many thanks, well if that is the case then nothing is happening. No prompt, just loads into HBOOT and our only option after that is to reboot manually.
Evo-3D said:
Many thanks, well if that is the case then nothing is happening. No prompt, just loads into HBOOT and our only option after that is to reboot manually.
Click to expand...
Click to collapse
Try again? Here is a link already renamed. Just put on root of SD card as before: http://db.tt/2ARi4m4
dastin1015 said:
Try again? Here is a link already renamed. Just put on root of SD card as before: http://db.tt/2ARi4m4
Click to expand...
Click to collapse
Weird, for some reason, going directly through the link that you provided worked. So now we have twrp on the phone. The 3vo recognized it, updated, but now still no phone or internet use.
Do I use twrp as a recovery? If so how? Should there be a twrp app now? Or do I just go back through HBOOT and select recovery from there?
Evo-3D said:
Do I use twrp as a recovery? If so how? Should there be a twrp app now? Or do I just go back through HBOOT and select recovery from there?
Click to expand...
Click to collapse
This might not help but try wiping the Dalvik Cache first. If that doesnt help, do a full wipe (factory reset/data wipe), install the ROM again and try that.
Theres no app that will show so go through HBOOT, select recovery (it will look like it is rebooting but it isn't - it is loading the recovery), then choose the backup/restore option.
Alternatively if the ROM you are using has 4 way reboot you can use that to boot directly into recovery.
EDIT: yes twrp is recovery.
Evo-3D said:
I was helping a buddy root his Evo 3D today. We managed to get S-off, but couldn't get Clockwork mod to install. Later I realized that his PC was not recognizing his 3vo. Installed the HTC drivers, still same problem. Installed HTC Sync, still the same. Now I can't do anything to his phone.
To make matters worse, he can't surf online. The phone boots up just fine, and the boot loader is unlocked, but this is where we currently stand.
Click to expand...
Click to collapse
There's a Su.zip Signed and Another version that's Unsigned!
Put Both versions on your SDCard and try Flashing one at a tine, see which one works?
Good Luck!
:NOW COMPLETE:
I would like to thank everyone that helped.
Switched PCs. Installed HTC drivers on 2nd PC, worked. Then went through the same root process. All done. I only with that veterans would also inform new root users that 'Error 16' will happen once the phone is rooted. All I had to do was call the provider and all was squared away.
Got one for you now. I was able to get my buddy's phone back. Seems that he can't remember his gmail PW. He swears that the PW he is giving me is correct, but he can't get in, not even through a PC. This blows, as he cannot use the market without a valid GM account. Not even getting a new GM account solves the problem. So I did some research and it seems that the original GM account associated wtih the phone cannot associate anymore, and trying to get a new GM account will not solve the issue. So if PW is incorrect, I'm assuming that the only thing that can be done is to reset the phone back to factory. My question is, doing so will cause me to update the phone to the newest version 1.50+. In doing so, no more root.
Are there any other options?
Going into setings and doing a factor reset doesn't update your phone to the 1.50 hboot and you don't lose root. Just flash a ROM that's updated to the latest ota I'm on clean ROM it runs perfect smooth as butter and don't forget to nandroid
Sent from my PG86100 using xda premium
I rooted my LTEvo using this method: http://forum.xda-developers.com/showthread.php?t=1671577 and now, when my phone is off and I plug a charger in, it automatically boots into fastboot. This happens with both USB and AC. I don't press any buttons, just plug the charger in.
Suggestions? Thanks!
I had the same thing happen to me yesterday, weird.
The issue was resolved by doing a full root and installing viperROM. Most likely an issue with the method listed above or trying to install TWRP while the bootloader was still locked.
AmonReviled said:
The issue was resolved by doing a full root and installing viperROM. Most likely an issue with the method listed above or trying to install TWRP while the bootloader was still locked.
Click to expand...
Click to collapse
Full root vs partial root. Please explain?
I suppose I meant rooting vs. unlocking the bootloader. I used the batch file method in the original post to root and install SU. I then used Goomanager to try flashing TWRP, but the phone just rebooted. The issue started occurring at that point, but stopped when I unlocked the bootloader using HTCdev.com and installed viperROM.
AmonReviled said:
I suppose I meant rooting vs. unlocking the bootloader. .....
Click to expand...
Click to collapse
Subtle yet very different
I had this same problem. I fix it by re-flashing the stock recovery via Android Terminal Emulator
shook187 said:
I had this same problem. I fix it by re-flashing the stock recovery via Android Terminal Emulator
Click to expand...
Click to collapse
Sounds like that would have done it for me as well. I'm guessing the stock recovery got corrupted somehow when I tried flashing TWRP with a locked bootloader.
AmonReviled said:
Sounds like that would have done it for me as well. I'm guessing the stock recovery got corrupted somehow when I tried flashing TWRP with a locked bootloader.
Click to expand...
Click to collapse
Haha my bootloader was locked too at the time I flashed CWM. Btw a thanks will be appreciate it.
Sent from my EVO using XDA
shook187 said:
I had this same problem. I fix it by re-flashing the stock recovery via Android Terminal Emulator
Click to expand...
Click to collapse
I'm having the same problem and also still have a locked bootloader too. I did like AmonReviled stated and had tried to install TWRP recovery after only rooting with Zedomax method and have been seeing this issue since then.
Since I don't have a lot of time on my hands right now, I really don't want to get into unlocking the bootloader and heading down the custom recovery and custom ROM road just yet so I'd like to be able to just restore the default HTC stock recovery without losing any of the rest of my data or having to reinstall everything. Especially since I sometimes like to charge my phone while completely powered off, and this issue has made that impossible.
Shook187, can you tell me how you were able to reflash the stock recovery through Android Terminal Emulator? I already have the app on my LTEvo but I'm assuming I also need access to a stock recovery image? Theoretically I'd like to be able to restore just the recovery partition to stock without losing/erasing any of the rest of the data on my phone.
Any help would be much appreciated.
EDITED TO ADD: Nevermind, I got it, and it didn't delete any of my data. I used the recovery image and instructions from the OP in the Clockwork Recovery thread at http://forum.xda-developers.com/showthread.php?t=1675430 in case anyone else is wondering.
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
ovakill22 said:
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
Click to expand...
Click to collapse
You should ask in the ROMs thread.
When you unlock, you also gain root.
kimdoocheol said:
You should ask in the ROMs thread.
When you unlock, you also gain root.
Click to expand...
Click to collapse
So if I follow the unlock guide. via ODIN and casual I gain root? I'm a newbie to this lol former Iphone user all of this is new to me. I've tried several roms and still have the same issue. Also followed the guides as well. It's very fustrating because I get no where regarding this matter. Even watching the video's and following the steps have led me to be unsucessful..
ovakill22 said:
So if I follow the unlock guide. via ODIN and casual I gain root?
Click to expand...
Click to collapse
1. Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and restore back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
ovakill22 said:
Hey guys I rooted and unlocked my Verizon Galaxy note. I installed some custom roms using the Touchwiz recovery and everything works except... I cannot make any phone calls or text. It says mobile signal or something like that. Did I do something wrong can any one assist me on this matter? I followed the steps on the form as well as several videos showing me how to do this. another question do i need to root first or unlock first? I've done this process over and over again but cannot get my cell phone to make calls or get data, There is like a hazard sign where the data shows.. please help me!
Click to expand...
Click to collapse
What ROM did you install?
johnnyvol said:
What ROM did you install?
Click to expand...
Click to collapse
Yeah..do you have a vzw phone? Did you flash a vzw rom for the note2?
johnnyvol said:
What ROM did you install?[/QUOT
I installed the clean rom verizon galaxy note 2 rom as well as the AOKP i believe and ran into that issue.
Click to expand...
Click to collapse
bendystrawboy said:
Yeah..do you have a vzw phone? Did you flash a vzw rom for the note2?
Click to expand...
Click to collapse
Yes I did. I used several roms but came into that issue still. I'm actually back to stock and later on today I'm going to try and unlock and root again. Wish me LUCK!
Evankovich406 said:
1. Flash revision3 via odin following the guide in its thread. (This will give you root)
2.Follow the bootloader unlock process in adam's guide from its thread (this will unlock your bootloader and unless hes changed it flash twrp a custom rocovery.)
Now you need to reboot into recovery and make a back up. To do this you need to go into recovery (twrp or clockwork mod). You can get to recovery by powering off the phone and holding volume-up+home+power. Now go to backup and restore back up. If you have an external sd I would recommend selecting the option to backup to it.
After that select a rom you want. If you want stock rooted you dont have to flash anything. Look in your app drawer if you see an app called supersu or super user you're rooted. If you want another rom follow these steps to flash it.
1. Read rom thread for known bugs so you know what youre getting into.
2. Download rom. DO NOT UNZIP.
3. Check md5 sum.
4. Move to external or internal sd where you can find it.
5. Boot into recovery.
6. Select install.
7 navigate to rom file.
8. Swipe to install. If it has aroma follow instructions if not wait for it to do its thing
Click to expand...
Click to collapse
Will do later on! wish me luck! I'll keep you posted if i'm successful or not...
Sounds like your phone now locked to a different network. This can occur. You did make a backup,efs etc?
From box 13......
howard bamber said:
Sounds like your phone now locked to a different network. This can occur. You did make a backup,efs etc?
From box 13......
Click to expand...
Click to collapse
No I did not do that. Now would I do that through recovery? I'm new to the andriod game lol Former Iphone user..
ovakill22 said:
No I did not do that. Now would I do that through recovery? I'm new to the andriod game lol Former Iphone user..
Click to expand...
Click to collapse
To do this wouldve meant you flashed a rom not meant for verizion and got another carriers radios. Also did you check in your settings to make sure you didnt switch data off airplane mode or switch off cdma/lte. Is your phone getting service now that you're back to stock?
Sent from my SCH-I605 using xda app-developers app
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.