I was flashing MeanBean to the newest version 3.09 from 3.07 i was currently on. I cleaned delvik and cache hell I even did the system and it sits in boot. So after many reflashed of 3.09 i finally decided to flash a different rom all together. That rom stays in boot. I'm S-on btw. I dont know what to do. I'm disabled and live alone so I need my phone. Thank you guys very much in advanced.
Sounds like your TWRP may need to be upgraded to the latest. You will have to go to the teamwin website and update using fastboot since you can't boot into the rom. If you have a nandroid backup you should try to restore that first.
cruise350 said:
Sounds like your TWRP may need to be upgraded to the latest. You will have to go to the teamwin website and update using fastboot since you can't boot into the rom. If you have a nandroid backup you should try to restore that first.
Click to expand...
Click to collapse
Or he can just flash the latest TWRP from recovery since he can get in there.
exSD said:
Or he can just flash the latest TWRP from recovery since he can get in there.
Click to expand...
Click to collapse
I have a newer version ive been meaning to flash thats on my sd card. I have no naindroid backup. Please let me know the steps to installing the newest twrp from bootlaoder. Thank you.
I need the newest twrp zip. All i can find are images for the newer version. the last .zip is the version im actually using 2.3.3.0 . If anyone has the newest one, please email it to me at [email protected].
http://techerrata.com/browse/twrp2/jewel
Download 2.4.3.0 .img.
Fastboot flash it. http://wiki.cyanogenmod.org/w/Doc:_fastboot_intro
Ill try thank you. I was thinking I needed to be able to boot up to use that. Thank you. Hang tight as Ill update this asap. Note to self, Update twrp every new version that drops unless told to go back one version.
parasurfer1979 said:
Ill try thank you. I was thinking I needed to be able to boot up to use that. Thank you. Hang tight as Ill update this asap. Note to self, Update twrp every new version that drops unless told to go back one version.
Click to expand...
Click to collapse
You just need to be able to get to the bootloader. So long as you have your PC/Linux set up with adb you can run the adb fastboot command and install the recovery then adb reboot.
exSD said:
You just need to be able to get to the bootloader. So long as you have your PC/Linux set up with adb you can run the adb fastboot command and install the recovery then adb reboot.
Click to expand...
Click to collapse
Ok I'm in fastboot and theres a usb unrecognize flag. I go to program manage and My HTC under Android phones has a "hazard". With the following after I open it...
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Im on Windows 8 btw. Im headed over to the HTC site to see if maybe there are updated drivers.
Any Ideas? Thank you guys for responding so expiditiously.
parasurfer1979 said:
Ok I'm in fastboot and theres a usb unrecognize flag. I go to program manage and My HTC under Android phones has a "hazard". With the following after I open it...
This device cannot start. (Code 10)
A request for the USB BOS descriptor failed.
Im on Windows 8 btw. Im headed over to the HTC site to see if maybe there are updated drivers.
Any Ideas? Thank you guys for responding so expiditiously.
Click to expand...
Click to collapse
Download these drivers:
http://downloadandroidrom.com/file/HTCEvo4GLTE/drivers/HTC_Driver_64.zip (64 bit)
http://downloadandroidrom.com/file/HTCEvo4GLTE/drivers/HTC_Driver_32.zip (32 bit)
---------- Post added at 10:59 AM ---------- Previous post was at 10:49 AM ----------
Here's a zip of 2.4.1.0 I found from the TWRP thread in the Original Android Dev board. Can't find a zip of the latest. This one should serve you well though.
Rename to PJ75IMG.zip and place in the root folder of your SDCARD, then boot to bootloader.
http://db.tt/lMZDGfOU
GOD bless YOU...
I noticed before i red your post my HTC drivers were very old. version 1.07 lol. Thanks HTC for telling use we might want to update. And thank you for the twrp file. That helps big time. Keep you all Posted.
parasurfer1979 said:
I noticed before i red your post my HTC drivers were very old. version 1.07 lol. Thanks HTC for telling use we might want to update. And thank you for the twrp file. That helps big time. Keep you all Posted.
Click to expand...
Click to collapse
Im putting in sd card but when bootloader scans, its not finding. Is there a specific place i should be putting this?
parasurfer1979 said:
Im putting in sd card but when bootloader scans, its not finding. Is there a specific place i should be putting this?
Click to expand...
Click to collapse
First, make sure you renamed it properly.
Then, make sure you're putting it in your external SD card, not your internal. If you don't have an external, then just place it in /sdcard
You would be right!!!
exSD said:
First, make sure you renamed it properly.
Then, make sure you're putting it in your external SD card, not your internal. If you don't have an external, then just place it in /sdcard
Click to expand...
Click to collapse
It loaded. Gonna flas a rom now. Ill keep you posted. BRB in 5-10min.
parasurfer1979 said:
It loaded. Gonna flas a rom now. Ill keep you posted. BRB in 5-10min.
Click to expand...
Click to collapse
When i bring up the bootloader it update twrp and when i select recovery, it reboots to a black screen. How do i pull out the file so it doesnt reinstall twrp every time. It wont open twrp so i can remove the zip. Could that zip file be bad?
Do i need to select clear storage in bootloader?
Does it take time for twrp to load? I dont remember my phone doing this on the last twrp install.
Just remove the SDCARD from the back and you won't have it try to install it every time.
It doesn't take long for TWRP to load really. After the installation, boot into the Recovery through the bootloader.
If he is s-on I didn't think he could flash a recovery through the bootloader.
Update your drivers and try to install the recovery through fastboot.
You didn't need to make a new thread in the wrong section for help as people were already helping you.
Sent from my EVO using xda app-developers app
NaterTots said:
If he is s-on I didn't think he could flash a recovery through the bootloader.
Update your drivers and try to install the recovery through fastboot.
You didn't need to make a new thread in the wrong section for help as people were already helping you.
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
It indeedworked after removing sd card loading rom again now. I've been rooted so long that i forgot. ill update again shortly.
parasurfer1979 said:
It indeedworked after removing sd card loading rom again now. I've been rooted so long that i forgot. ill update again shortly.
Click to expand...
Click to collapse
Im still getting stuck in boot. I'll try another rom I use.
Related
Shoot... I've been wanting to flash my Evo 3D with Dev-ROMS that are available today, like Viper, XRON, Supra, Synergy, ShooterRewind, etc.. to test them out. However, every time I try to perform nand restore using TWRP my phone just suddenly shuts off. Currently I have 2 backup available from the point of when I first rooted my phone. I have done many ROM Flashing on my Evo 4G to the point that my co-worker calls me a flash-junkie. The point is, I'm not new to flashing ROMS with Clockwork (BTW I prefer AmonRa on 4G), but I'm new to TWRP and I don't thing the concept is any different. What am I doing wrong? Have anyone else run into this same issue? Maybe I'm a noob after all.
I'm having the same issue. I have several backups and I transfered the TWRP folder to my PC to free up space on my SD card. I just did a wipe of my phone and copied the TWRP folder back to my SD. When I try to restore the phone powers down.
Can anyone share some light on this issue?
I too ran into this problem and am looking for help on it, it scared the life out of me when it shutdown
I haven't tried a nand restore yet, you need to post this in the TWRP thread so the dev's can address this.
cruise350 said:
I haven't tried a nand restore yet, you need to post this in the TWRP thread so the dev's can address this.
Click to expand...
Click to collapse
I couldn't post in the TWRP thread because I dont meet the post requirement for posting in the dev threads. Can somebody post this issue there?
This issue has been brought up in the TWRP thread. They said they fixed it. What version of TWRP are you all running? They also said that it works if you flash the zip via PG86IMG, and not via fastboot. Its on Post #2 on the thread.
evohnoo said:
This issue has been brought up in the TWRP thread. They said they fixed it. What version of TWRP are you all running? They also said that it works if you flash the zip via PG86IMG, and not via fastboot. Its on Post #2 on the thread.
Click to expand...
Click to collapse
I have the latest version flashed via zip. It doesn't reboot into recovery. It shuts off and a battery pull is needed to power back on.
schwartz561 said:
I have the latest version flashed via zip. It doesn't reboot into recovery. It shuts off and a battery pull is needed to power back on.
Click to expand...
Click to collapse
You phone shuts off when you try to boot into recovery? How are you trying to get there? Volume down and power? Have you tried using adb? Try typing adb reboot recovery into a cmd prompt. Does that work?
If anything, just download version 1.0.1 of TWRP, (I have it, and that version is solid), rename it PG86IMG (dont add a .zip to the file name if youre using windows), reload that file onto your SD card, and then flash via bootloader... report back
I'm still unable to get TWRP to restore to my initial backup. Now, I am using clockwork just to play around with different ROMs. I see that TWRP just updated to 1.0.3 and I will be trying that soon. I'll reply with the outcome.
CWM Version 5.8.1.4, Stock rom, rooted.
Just wanted to create a back up before I flash any custom roms, I haven't been able to create a system back up. I've tried backing up to external SD card, and internal SD card but neither works.
Internal SD card will go all the way through the steps: Boot image, recovery image, system, data, and then it just hangs on the SU command at the very end of the data back up.
External SD card hangs on system back up with no commands.
Is there any fix around this? Would AmonRA be a better recovery manager to use? I used CWM because it's what I used on my Droid 2.
Also, once I create a recovery image, is there a way to manage and delete images through CWM? I know RomManager had a way, but there were issues with ROM manager on HTC phones so I stayed away from it.
edit: sorry I tried to link to other forum posts but I can't post links. there was a post I wanted to link to saying AmonRA is better, but it didn't go into detail as to why. Can I uninstall CWM and reinstall AmonRA without any problems?
m0viestar said:
CWM Version 5.8.1.4, Stock rom, rooted.
edit: sorry I tried to link to other forum posts but I can't post links. there was a post I wanted to link to saying AmonRA is better, but it didn't go into detail as to why. Can I uninstall CWM and reinstall AmonRA without any problems?
Click to expand...
Click to collapse
Yes. Do it! That is, switch to AmonRA. One of the big problems with CWM is that it won't charge a dead battery if you happen to run it all the way down to zip.
I know AmonRA is in the roll-up sticky among other places.:highfive:
topgun1953 said:
Yes. Do it! That is, switch to AmonRA. One of the big problems with CWM is that it won't charge a dead battery if you happen to run it all the way down to zip.
I know AmonRA is in the roll-up sticky among other places.:highfive:
Click to expand...
Click to collapse
Thanks, doing so now. Having some problems when I reboot to bootloader though...see attached. Can't link images yet.
edit: well never mind I am retarded.
edit 2: thanks
m0viestar said:
Thanks, doing so now. Having some problems when I reboot to bootloader though...see attached. Can't link images yet.
edit: well never mind I am retarded.
edit 2: thanks
Click to expand...
Click to collapse
Ha! I've done everything through flashable files and only used adb and fastboot via hansoon's all in one tool when I rooted and later when I s-offed. Tonight was the first time I sat down and actually 'practiced' doing things with fastboot and adb....and I tried to do what I bet you just did...flash it using ADB?
:laugh::laugh:
m0viestar said:
Thanks, doing so now. Having some problems when I reboot to bootloader though...see attached. Can't link images yet.
edit: well never mind I am retarded.
edit 2: thanks
Click to expand...
Click to collapse
In bootloader, you use fastboot commands. So it would be
Code:
fastboot devices
Then, assuming it sees your device
Code:
fastboot flash recovery recovery.img
recovery.img is the recovery file, of course.
Sent from my Business ICS Rezound.
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
PS I've tried downloading the ALL IN ONE TOOLKIT and sideloading a rom it asks if the device is in recovery, it is TWRP recovery, but then says error device not found.
Please any help would be much appreciated.
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
can you adb into the phone from your PC ?
you can try to push a rom to /data/media
boot to recovery wait about 10 seconds and the open cmd on you pc and run adb
adb push Rom.zip /data/media
wait for it to copy (it takes a while)
reboot phone back to recovery
your rom.zip should be on the phone now
Flash
your home free
Does twrp run? You should still be able to install the Rom as long as your recovery program still works.
Sent from my HTC One using xda app-developers app
joshevans5579 said:
PS I've tried downloading the ALL IN ONE TOOLKIT and sideloading a rom it asks if the device is in recovery, it is TWRP recovery, but then says error device not found.
Please any help would be much appreciated.
Click to expand...
Click to collapse
do you still have the fastboot folder on your PC ? do the adb push from their
first put the rom.zip in c:\fastboot
---------- Post added at 01:28 AM ---------- Previous post was at 01:25 AM ----------
mrstromboli said:
Does twrp run? You should still be able to install the Rom as long as your recovery program still works.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
twrp is messed up he most likely formatted the system and the /sdcard (rom) it happens all the time
Yea I did the same thing the first time I rooted my one X lol I was scared my phone was ruined! To the OP relax your phone will be alright just follow instructions better in the future.
Sent from my HTC One using xda app-developers app
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
clsA said:
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
Click to expand...
Click to collapse
Ok first, thank you for taking the time to help me with this.
I am a little bit of a noob when it comes to this stuff. I know just enough to get into trouble apparently. lol
I have my phone plugged in and have adb up, and am in fastboot. It doesn't seem to recognize my phone. I type adb devices, it just says list of devices and doesn't list any.
It won't let me push anything to my phone. I'm probably doing something wrong.
joshevans5579 said:
Ok first, thank you for taking the time to help me with this.
I am a little bit of a noob when it comes to this stuff. I know just enough to get into trouble apparently. lol
I have my phone plugged in and have adb up, and am in fastboot. It doesn't seem to recognize my phone. I type adb devices, it just says list of devices and doesn't list any.
It won't let me push anything to my phone. I'm probably doing something wrong.
Click to expand...
Click to collapse
I tried adb push myROM.zip /data/media
it says error no device found.
joshevans5579 said:
I tried adb push myROM.zip /data/media
it says error no device found.
Click to expand...
Click to collapse
I got it!!!!! Thanks! I just wiped it again couldn't hurt anything. It recognized it this time! Again Thank you for your help I really appreciate it.
joshevans5579 said:
I got it!!!!! Thanks! I just wiped it again couldn't hurt anything. It recognized it this time! Again Thank you for your help I really appreciate it.
Click to expand...
Click to collapse
Very good !! Glad it turned out well for you.
Lost!
clsA said:
Here is the instructions i posted that got another guy up and running hope it helps you out
This worked in CWM anyway
Boot into recovery
from the pc (c:\fastboot) do the adb push filename.zip /data/media
wait for it to copy
then on the phone reboot recovery your rom should be in the root of the sdcard waiting for you to flash
I just tested it and it worked perfect ( of coarse I didn't format my sdcard so ymmv )
Click to expand...
Click to collapse
I've tried all of this with no luck at all. Main version is 1.26.502.10...tried installing Nandroid backups that other posted and keep getting an error when extracting the zip. I've adb pushed ROMs to the sdcard multiple times. They load for installation, everthing seems to work, but once I reboot, it hangs on the HTC screen.
I too deleted the system files so I can't get back in the phone. Tried CWM and TWRP and tried over and over to get it to work with no luck.
Tried installing CleanROM, Stock, and one other...no dice.
Any ideas? I've been at this for two days now.
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
gunnyman said:
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
Click to expand...
Click to collapse
Yes good advice
Sent from my HTC One using xda premium
gunnyman said:
download the 1.26.12 RUU that designgears posted in general
boot to bootloader
fastboot oem lock
install RUU to start fresh
Click to expand...
Click to collapse
Tried that but my version is 1.26.502.10 and that one is .12
It wouldn't work because of that.
metaluna21 said:
Tried that but my version is 1.26.502.10 and that one is .12
It wouldn't work because of that.
Click to expand...
Click to collapse
yes it would.
it works just fine
you have to lock your bootloader first is all.
the RUU is an unreleased leak, but yes it will install as long as your CID is CWS_001. An AT&T device.
joshevans5579 said:
I NEED SOME HELP
I was loading Cyangenmod to my HTC ONE and accidentally deleted my backup. Now it's saying there's no OS found and I can't load one from my computer. Please help me!
Click to expand...
Click to collapse
I did the same thing i used a usb otg cable (http://www.amazon.com/gp/product/B005QX7KYU/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1) I put a rom on a flash drive and mounted it in my recovery and problem solved os installed on phone and working fine.
gunnyman said:
yes it would.
it works just fine
you have to lock your bootloader first is all.
the RUU is an unreleased leak, but yes it will install as long as your CID is CWS_001. An AT&T device.
Click to expand...
Click to collapse
I get Error 132 signature every time I try to do the RUU
Which phone do you have?
gunnyman said:
Which phone do you have?
Click to expand...
Click to collapse
AT&T 32g HTC One
I tried following the upgrade to ViperX+2.0.1 and after flashing recovery and boot.img I seem to be stuck in a loop. Now I'm stuck on HTC splash screen and can't do anything. I go to recovery TWRP and none of my backups are there!
I cannot reboot. Computer won't recognise phone on USB.
Please Help!!!
vectorer said:
I tried following the upgrade to ViperX+2.0.1 and after flashing recovery and boot.img I seem to be stuck in a loop. Now I'm stuck on HTC splash screen and can't do anything. I go to recovery TWRP and none of my backups are there!
I cannot reboot. Computer won't recognise phone on USB.
Please Help!!!
Click to expand...
Click to collapse
How do you locate your backup in TWRP? Is it from the restore menu or from file manager menu? I never see my backups in file manager but if you choose restore menu, they are normally there.
superbay said:
How do you locate your backup in TWRP? Is it from the restore menu or from file manager menu? I never see my backups in file manager but if you choose restore menu, they are normally there.
Click to expand...
Click to collapse
Restore menu, but there is nothing there! I cannot find anything in the file manager or install zip and I know there are zip files!
Am I bricked? Any hope?
vectorer said:
Restore menu, but there is nothing there! I cannot find anything in the file manager or install zip and I know there are zip files!
Am I bricked? Any hope?
Click to expand...
Click to collapse
afaik as long as you can go to bootloader, your device is not bricked. You can still push the zip file or ruu. What indicates that your computer doesnt recognize the device?
superbay said:
afaik as long as you can go to bootloader, your device is not bricked. You can still push the zip file or ruu. What indicates that your computer doesnt recognize the device?
Click to expand...
Click to collapse
when I connect it the MTP driver won't install, I had thought to at least salvage some pictures etc. but the phone doesn't show in windows.
I was running ViperX+ 2.0.0, I've now got the 2.0.1 zip file so I'm going to try to sideload that, following directions from here http://forum.xda-developers.com/showthread.php?t=2318497, since I'm really new at this and need spoon feeding. I admit that if it works I am worried about the boot.img file but such is life. fingers crossed
okay, I just tried to flash the boot.img file using VenomKernelFlasher.exe and it won't do it because the device isn't connected!!
this driver is killing me
vectorer said:
when I connect it the MTP driver won't install, I had thought to at least salvage some pictures etc. but the phone doesn't show in windows.
I was running ViperX+ 2.0.0, I've now got the 2.0.1 zip file so I'm going to try to sideload that, following directions from here http://forum.xda-developers.com/showthread.php?t=2318497, since I'm really new at this and need spoon feeding. I admit that if it works I am worried about the boot.img file but such is life. fingers crossed
okay, I just tried to flash the boot.img file using VenomKernelFlasher.exe and it won't do it because the device isn't connected!!
this driver is killing me
Click to expand...
Click to collapse
Never mind about the MTP driver, mate. It is not always an indication that the computer doesn't recognize the phone. I have installed the same driver in several computers with similar OS and about half of them shows that MTP driver failed to install. HTC sync even always says no device connected. However, the computer still recognize the phone to be used for rooting or doing anything using hassoon's tool.
Before continuing, do you own HTC One or One X+? The link you refered shows that it's HTC One thread.
For HTC One X+ you can read in the 4th post in this thread http://forum.xda-developers.com/showthread.php?t=2066390
superbay said:
Never mind about the MTP driver, mate. It is not always an indication that the computer doesn't recognize the phone. I have installed the same driver in several computers with similar OS and about half of them shows that MTP driver failed to install. HTC sync even always says no device connected. However, the computer still recognize the phone to be used for rooting or doing anything using hassoon's tool.
Before continuing, do you own HTC One or One X+? The link you refered shows that it's HTC One thread.
For HTC One X+ you can read in the 4th post in this thread http://forum.xda-developers.com/showthread.php?t=2066390
Click to expand...
Click to collapse
Thanks. It's HTC One X+, I got there from a Google search for sideload as I know zero about it. As it turns out it didn't work, got to 22% then failed every time. I'll check out that link now.
Thanks again.
Ran Hasssoon and got
adb server is out of date. killing...
* daemon started successfully *
* failed to write data 'protocol fault (no status)' *
C:\Hassoon\One_X+_All-In-One_Kit_v\data>
Next idea please
Where can I find an RUU for this phone........ HTC One X+ EvitaRE
vectorer said:
Ran Hasssoon and got
adb server is out of date. killing...
* daemon started successfully *
* failed to write data 'protocol fault (no status)' *
C:\Hassoon\One_X+_All-In-One_Kit_v\data>
Next idea please
Where can I find an RUU for this phone........ HTC One X+ EvitaRE
Click to expand...
Click to collapse
Did you get that after choosing sideload option? try putting the zip file in the data folder in hassoon toolkit.
For ruu you can try look at q18 in the firsy post of this thread forum.xda-developers.com/showthread.php?t=2179337
My last post in that thread might help too. However, check your device radio version first to see which one suits yours.
or maybe this thread might help as well since it's for Telus version forum.xda-developers.com/showthread.php?t=2051032
superbay said:
Did you get that after choosing sideload option? try putting the zip file in the data folder in hassoon toolkit.
For ruu you can try look at q18 in the firsy post of this thread forum.xda-developers.com/showthread.php?t=2179337
My last post in that thread might help too. However, check your device radio version first to see which one suits yours.
or maybe this thread might help as well since it's for Telus version forum.xda-developers.com/showthread.php?t=2051032
Click to expand...
Click to collapse
been absent for a few days.
yes it was sideload, i'll try the data thing now
also i've had viper for a while and like it, but if you think another rom would work better in this case please let me know
i appreciate all your help. i'm using my old sensation 4G right now..... i like it but have gotten used to the OneX+ so i really hope to be up and running again
superbay said:
Did you get that after choosing sideload option? try putting the zip file in the data folder in hassoon toolkit.
Click to expand...
Click to collapse
how would i do this operation??
now no matter what i try i get
error: closed
vectorer said:
been absent for a few days.
yes it was sideload, i'll try the data thing now
also i've had viper for a while and like it, but if you think another rom would work better in this case please let me know
i appreciate all your help. i'm using my old sensation 4G right now..... i like it but have gotten used to the OneX+ so i really hope to be up and running again
Click to expand...
Click to collapse
Helping anyone in need whenever possible is how people give back to this community
I occassionally had the same case with you and surely would want yo see yours running up again like mine. The difference is i had several rom zips in my hox+ at that time but everytime i flashed any of them and no matter how many times i wipe and flash boot.img, it ended up in bootloop.
vectorer said:
how would i do this operation??
Click to expand...
Click to collapse
In hassoon toolkit there is a folder named 'data' just put your zip file there and choose the file from there when sideloading. Sometimes problem occurs from such minor thing where any file you need (rom, recovery, kernel) needs to be put in the adb folder.
vectorer said:
now no matter what i try i get
error: closed
Click to expand...
Click to collapse
If i were you,i would start fresh from another computer just to make sure that it is not your computer causing that and to see if it makes any difference. However I still believe that the computer recognizes the device,otherwise the command prompt will say 'waiting for device' if adb doesn't recognize the device. If such problem still persists, then i think it is the time for you to ruu.
Well i expect any help from others since the beginning. This thread has been viewed more than 500 times but there are you and me only mate. Just dont stop trying anyway. That's where your learning is from and how you prevail
superbay said:
Helping anyone in need whenever possible is how people give back to this community
I occassionally had the same case with you and surely would want yo see yours running up again like mine. The difference is i had several rom zips in my hox+ at that time but everytime i flashed any of them and no matter how many times i wipe and flash boot.img, it ended up in bootloop.
In hassoon toolkit there is a folder named 'data' just put your zip file there and choose the file from there when sideloading. Sometimes problem occurs from such minor thing where any file you need (rom, recovery, kernel) needs to be put in the adb folder.
If i were you,i would start fresh from another computer just to make sure that it is not your computer causing that and to see if it makes any difference. However I still believe that the computer recognizes the device,otherwise the command prompt will say 'waiting for device' if adb doesn't recognize the device. If such problem still persists, then i think it is the time for you to ruu.
Well i expect any help from others since the beginning. This thread has been viewed more than 500 times but there are you and me only mate. Just dont stop trying anyway. That's where your learning is from and how you prevail
Click to expand...
Click to collapse
thanks I'll keep trying this weekend
vectorer said:
thanks I'll keep trying this weekend
Click to expand...
Click to collapse
Just keep posting here to see how far your effort is with it. Good luck
superbay said:
Did you get that after choosing sideload option? try putting the zip file in the data folder in hassoon toolkit.
For ruu you can try look at q18 in the firsy post of this thread forum.xda-developers.com/showthread.php?t=2179337
My last post in that thread might help too. However, check your device radio version first to see which one suits yours.
or maybe this thread might help as well since it's for Telus version forum.xda-developers.com/showthread.php?t=2051032
Click to expand...
Click to collapse
mine may not be a telus version
my radio version is "RADIO-SSD:2.14.55.11"
the closest i can find to this version is Cingular!
http://www.androidruu.com/getdownlo....55.01_18.21.95.55L_release_310178_signed.exe
version is 2.14.55.01
the Telus one version is 1.09.55.17
I'm guessing the Cingular would be best??
thanks
vectorer said:
mine may not be a telus version
my radio version is "RADIO-SSD:2.14.55.11"
the closest i can find to this version is Cingular!
http://www.androidruu.com/getdownlo....55.01_18.21.95.55L_release_310178_signed.exe
version is 2.14.55.01
the Telus one version is 1.09.55.17
I'm guessing the Cingular would be best??
thanks
Click to expand...
Click to collapse
Well it should say the exact same radio version if you dont want to meet any problem. Can you search for the one as same as yours?
Or if you need further detail about the version, you can type 'fastboot getvar version-main' in the adb
superbay said:
Well it should say the exact same radio version if you dont want to meet any problem. Can you search for the one as same as yours?
Or if you need further detail about the version, you can type 'fastboot getvar version-main' in the adb
Click to expand...
Click to collapse
Well nothing is working.
I guess my device is a paperweight even if I can get into recovery.
Can't flash anything, not even the RUU, can't sideload........nothing.
Tried Hassoon's instructions for the RUU but it won't reconise that a device is attached to go into Bootlaoder, sideloading ALWAYS fails at 22%. Others seem to overcome this but I cannot. It's frustrating reading how many problems are solved when nothing works for me.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.