Problem with rom X10S - XPERIA X10 Q&A, Help & Troubleshooting

I got some problem with this rom. My phone get white light when i open or install some app especially titanium backup though i have just installed it a moment ago. Then i try to replace battery icon my phone stuck in xperia logo. I have tried to install many time and it's the same. Plz help me!

''White light''
zombie064 said:
I got some problem with this rom. My phone get white light when i open or install some app especially titanium backup though i have just installed it a moment ago. Then i try to replace battery icon my phone stuck in xperia logo. I have tried to install many time and it's the same. Plz help me!
Click to expand...
Click to collapse
I had the same problem when I used X10S, unwanted reboots as WLOD (White Light Of Death). Typically, this occurs when you change the CPU frequency or an process/app is malfunctioning. I had that problem when I tried to open a large app - especially Settings.
Anyway, here's the solution: after flashing the ROM - flash over the latest Ferakernel (V3.6) http://forum.xda-developers.com/showpost.php?p=34222065&postcount=5378 After that, don't forget to install the libs and modules provided before rebooting... and clear cache and dalvik cache.
I hope this helps you. For me - it did the trick. :cyclops:

it's working! thank you

Related

[Q] Gintonic 2.1 & Zombie kernel 1.6 still reboots

Hi all,
I can't post on development, just wanted to thanks slide for Gintonic 2.1 & new kernel performance is up, yet i still experience random reboots on my X10 mini pro.
what I did: SEupdate, format SDcard, then root & xrecovery, then reset/wipe and install rom & kernel, so I'm sure it's clean install.
But I'm still experiencing reboots ...
Regards,
Benoit
benoitm974 said:
Hi all,
I can't post on development, just wanted to thanks slide for Gintonic 2.1 & new kernel performance is up, yet i still experience random reboots on my X10 mini pro.
what I did: SEupdate, format SDcard, then root & xrecovery, then reset/wipe and install rom & kernel, so I'm sure it's clean install.
But I'm still experiencing reboots ...
Regards,
Benoit
Click to expand...
Click to collapse
I have same problem in zombie panic kernel v 1.59 and v 1.61.
after i update to v 1.62, i don't had problem reboots. and everything it's ok.
Problem occurs usually when:
I use the phone for 10/15 minutes, that is running music or radio, or using the phone, like surfing and installing app from market.
I'll try the new 1.63 ...
Benoit
Sent from my U20i using xda premium
Hi, No reboots for me 4 days into 1.63+2.1, I did similar process only difference is I use clockworkmod, someone else will have to confirm but I remember a while back all the roms where coming out with "no longer supporting xrecovery". As said dont know might be nothing but everyone seems to use clockworkmod now for flashing.
Sorry assuming you used xrecovery to flash rom since you mention installing it.
Well strangely, the update to 1.63 did it, no more reboot and I can even OC the phone ! It works great no reboot, even with wavy usage of GPS navigation with CoPilot live over the week end ! this is perfect !
I only have an issue with the radio FM app which is buggy : sound start on the hp instead of head phone, favorite station are not kept, frequencies are written in green on black which is not visible and RDS name is overlapping frequencies ...
Another issue, I'm still not able to fine tune auto brightness to have good reactivity when phone get out of standb by on shiny day it take 1/ 1.5 second for the screen to detect it need to boost lightness ... Same when I'm in a call and I want to use the keyboard to dial, it takes 1/1.5 second for the phone to adjust brightness... I've tried several tutorial from forum but it still have this small lag in brightness reactivity.
Other the phone is now perfect to me in 2.3.5 ! Thanks very much slade87 ! One note I don't like the boot animation some less shiny would have been welcome ...
Cool you got it all working, yes there where instabilities with cross ROM/kernels.
I like the new bootanimation but you can allways change it out if you dont..
(update 7/7/11)[Boot Animation]more bootanim
Bootanimation Installer v3.3

MiniCM10-4.0.1 Can't install any apps

Hello,
since i've updated my firmware to MiniCM10-4.0.1 i can't install any apps.
The only thing is coming when i'm trying to install something is: 'Application not installed'. I already tried a factory reset but it didn't help and the option 'unknown sources' is activated..
Everything works except of that.
My phone is a Sony Ericsson Xperia Mini Pro.
please help me..
Hi
Did you wipe /system, /data and /cache through cwm before installing?
Did you try a full reinstall with kernel and rom?
Do you have the newest jb kernel from nAa?
Can you install apps from the sdcard with the apk?
Answer these and we could propably help
black screen
Ok, i solved the problem. Just added some apps to the rom of the firmware und reinstalled it. And yes, it was the actual firmware and kernel. There was no PlayStore when I installed it for the first time and only some .apk are working.
Now i've got another problem, sometimes the screen stays black after pushing a button. What means sometimes, it happens about every hour, or twice a hour, or four times a hour. It's so annoying, because then i have to take out the battery und put it back in the device again.
I don't know what to do about it, i tried to change the cpuspeed and turned off the automatical screenbrightness, but with no effect.
If you'd read the miniCM10 thread, then you'd know that
this is a known bug.
You dont have to pull out the battery,
when I got this problem I have to push
the power button few times and then
the screen lights up.
doesn't work, the phone just restarts.

[Q] Sony Xperia Tipo ... Bricked?! Please Help

Phone info:
Sony Xperia Tipo ST21i
Rooted
LOCKED Bootloader
Custom Firmware and Custom Rom: Gimlo
Xposed Framework Installed
Problem:
After my last reboot, phone is stuck at 'SONY' bootlogo. I am able to boot to CWM Recovery. On removing battery, phone would switch on automatically sometimes. But the main problem,, the phone doesn't go past the 'SONY' logo.
Edit: The phone charges(shows red led and the charging icon) on connecting to pc via usb.
'Might Be' Causes:
Everything had been working fine upto yesterday. Yesterday i was cleaning up my phone so..something might have happened yesterday. So all the things i did in chronological order(besides daily routine):
Uninstalled apps- Meme Generator Free, Township
Installed- Wakelock Detector and ran it once
Uninstalled Script- TweakDrypt(using Terminal Emulator)
enabled Xposed module for Greenify(free version)
Reboot!
And the phone has been like this since yesterday.
I haven't flashed any rom or anything..and i don't think it is a hard brick either..So will i have to use the flashtool to flash the stock firmware and rom?( I would like an alternative to preserve my data please!)
Solutions Tried:
→Google searches...only found suggestions regarding flashtool to flash the device stock
→At first, i went to CWM and took a nand backup of 'current state' of the phone. Then, I cleared cache and wiped dalvik cache. Rebooted, still it is stuck.
→Did a soft reset, "Power+volume up" until i get 1 vibration..and then released it..no effect.
→I make weekly nand backups of my phone..so i tried restoring last week's backup. Even then it is stuck! I don't understand why would that happen...
Please help...If i have missed out to mention any detail, please do tell and i will send it.
Sherl Holmes said:
Phone info:
Sony Xperia Tipo ST21i
Rooted
LOCKED Bootloader
Custom Firmware and Custom Rom: Gimlo
Xposed Framework Installed
.......
.
Click to expand...
Click to collapse
-_-..Could find no solution...Finally flashed stock ****.

Xperia Z2 stuck in bootloop with generic android / cyanogen runs without problems..

Hi, I have a strange problem with my Xerpia Z2..
After flashing a cyanogen mod to test it out.. it`s not possible for me to get a working generic Android system anymore.
The smartphone stuck in a caint of "bootloop" or, if it start android at last, it reboots after a short while automaticly.
The bootloop is like this:
Screen: Shows 10 sec. sony-logo -> than 2 sec. black screen -> than 5 sec. sony-logo -> than it starts from beginning..
The bootloop-lenght varied until it starts finally into android.. sometime it doesn`t come to that point, and it reboots for a very long period (until I get annoyed and shut it down)
I have trying the following things to solve that issue:
- Flashing several stockroms wirh flashtool (D6503_17.1.2.A.0.314_Generic DE.ftf / D6503_23.0.1.A.0.167_Customized DE.ftf)
- trying to reset the hole phone with the xperia "emma" tool
- trying to reset the hole phone with the pc companion software
.. in my opinion, the problem could be find in the bootloader/recovery.. I don`t think it`s a hardware issue, because cyanogen mod is still runs without problems. Maybe some cyanogen remains are still leftover in the bootloader, that don`t work with generic android versions.. that`s what I can imagine. (but i`m not an expert
I don`t get why flashing the phone doesn`t solve the issue., it almost seems that the flash process don`t touch the bootloader, to overwrite it with stock parameters (?) or does not fix that area which is responsible for that issue..
Phone status at this time:
Not root - not unlocked - no backup of TA - DRM Keys (The guy that I bought that phone from, saddly doesn`t do a backup /
Before you flash the stock rom, are you clearing the Dalvik cache?
Whenever I've been through instructions on flashing roms, that always seems to be a step, but I didn't see you mention doing that before flashing.
Lagamorph said:
Before you flash the stock rom, are you clearing the Dalvik cache?
Whenever I've been through instructions on flashing roms, that always seems to be a step, but I didn't see you mention doing that before flashing.
Click to expand...
Click to collapse
Hi, I did that.. the 3 checkboxes in Flashtool are always enabled (Wipe: Cache, APPLOG. Data)

HELP PLEASE, J7 Prime screen flashing, system ui stopped etc.

So I just flashed Enigma v3 rom on my j7 prime (sm g610f). Everything was fine and then I flashed the fix. once i rebooted after sideloading the fix i booted to phone up to find out that the screen is fading to black, then fading to my desktop wallpaper (only the wallpaper) then black (its a smooth fade transition), then i went into emergency mode to see if it would fix, the fading stopped, but now there is a popupthat keep appearing, saying "Unfortunately, System UI has stopped" when i press ok, it keeps appearing again. I tried to reboot into safe mode, doesn't help, and tried a hot reboot, also doesn't help .
wsty said:
So I just flashed Enigma v3 rom on my j7 prime (sm g610f). Everything was fine and then I flashed the fix. once i rebooted after sideloading the fix i booted to phone up to find out that the screen is fading to black, then fading to my desktop wallpaper (only the wallpaper) then black (its a smooth fade transition), then i went into emergency mode to see if it would fix, the fading stopped, but now there is a popupthat keep appearing, saying "Unfortunately, System UI has stopped" when i press ok, it keeps appearing again. I tried to reboot into safe mode, doesn't help, and tried a hot reboot, also doesn't help .
Click to expand...
Click to collapse
Try to use the rom without fix.And tell the ROM developer to fix this issue.
Sent from my Primo NF2 using Tapatalk
Parthib said:
Try to use the rom without fix.And tell the ROM developer to fix this issue.
Click to expand...
Click to collapse
Thanks for the help, I fixed it by wiping data, cache, davlik and system then reflashing it using adb sideload, seems like problem was caused by deepsleep fixer app (or maybe xposed installer) because when i deleted those apps after reflashing (they come with rom) then installing fix zip file using twrp, there are no problems anymore. :good:

Categories

Resources