Related
I just acquired a Droid Eris from my buddy of mine, when you turn it on it just stays at the screen with the 3 androids on skateboard(if I turn it on with it plugged into usb It makes the connection noise though). I can Also get into hboot and recovery but no matter what I do it will not install anything, everything just fails. Also its say its S-ON. Any help would be great, thanks.
glitch666 said:
I just acquired a Droid Eris from my buddy of mine, when you turn it on it just stays at the screen with the 3 androids on skateboard(if I turn it on with it plugged into usb It makes the connection noise though). I can Also get into hboot and recovery but no matter what I do it will not install anything, everything just fails. Also its say its S-ON. Any help would be great, thanks.
Click to expand...
Click to collapse
Well, you didn't really say what "everything just fails" means. How about giving us an error message?
While you are at it, what version of recovery is on the phone - Amon_RA v1.6.2, or some version of Clockwork?.
Same deal for the bootloader - how about an exact version number - 1.49.0000, 1.47.0000, or other?
Because your phone is already "soft-bricked", and you got it for free, and because your recovery boots up, you can try flashing "ErisMTDNuke_v0.9.zip". You can find it at this post:
http://forum.xda-developers.com/showpost.php?p=11651122&postcount=21
It has an an assert() in it that tries to block it from running on ClockworkMod, but depending on what version of recovery you have, that may not matter. Let me know if you get any errors running it. If it runs, you should be back in business; it leaves the /system, /data, and "boot" partitions of the ROM blank, so you will need to flash a ROM afterwards. Also, if you have ClockworkMod recovery on the phone, you should consider getting it off of there, and putting one of the two Amon_RA recovery variants on there.
You might find the entire thread that contains the above post very useful, as it describes a method for installing the S-OFF bootloader using the "SoSickWiTiT" rooting method, as well as other tricks such as using fastboot to soft-load recoveries without writing them to flash; that full thread is here:
http://forum.xda-developers.com/showthread.php?p=11652502
Please provide full details on what works / doesn't work, particularly with "ErisMTDNuke_v0.9.zip" - it has only been used on 3 phones so far (worked on all three, though).
cheers
bftb0
I dont think the phones been rooted(my friend has no idea what that even is). It has hboot 1.49.0000, and the recovery is not a custom one, its Android recovery 2e. If I try to Install an update through recovery its says installation aborted. Also if I use pb00img.zip it loads in hboot but says previous version is older and to reboot.
glitch666 said:
I dont think the phones been rooted(my friend has no idea what that even is). It has hboot 1.49.0000, and the recovery is not a custom one, its Android recovery 2e. If I try to Install an update through recovery its says installation aborted. Also if I use pb00img.zip it loads in hboot but says previous version is older and to reboot.
Click to expand...
Click to collapse
OK, that is completely different. It is impossible to load a dev ROM using the stock recovery <2e>
Did you try the "wipe data/factory reset procedure" of the recovery menu, or have you already done that and then the phone hangs at the three droids?
bftb0
If the stock ( <2e> ) recovery factory reset does not work, then the method of last resort is going to be to try and get the S-OFF bootloader onto the phone using the "SoSickWiTiT" rooting method.
Generally what happens - if you have corrupted flash memory partitions - is that parts of this install will fail, but getting the engineering bootloader (1.49.2000 S-OFF) onto the phone will succeed - and from there you can leverage the behaviors of the S-OFF bootloader to get a custom recovery running (by using fastboot). Once that happens, you can run the ErisMTDNuke_v0.9.zip flash to erase the /system, /data, and "boot" partitions, so that a subsequent ROM flashing operation will succeed (probably, no guarantees).
The way the "SoSicWiTiT" rooting method works, you run the "Official 2.1 RUU" Utility on the PC - but just before it is ready to start writing to the phone (after it has unpacked all it's temporary files and installed drivers for you), you take the "Root PB00IMG.ZIP" file, rename it to "rom.zip", and replace the "rom.zip" file unpacked in the temporary file area of the RUU. This gets the S-OFF bootloader installed (at a minimum, possibly the whole rom if your problem is not flash memory page corruption).
The thread I mentioned above has more details; ask questions if you don't understand something.
bftb0
PS You should be doing all of these operations with a well charged battery - 100% is a good place to start. Don't let the phone sit in HBOOT or FASTBOOT mode for extended periods of time - the battery will discharge rapidly, even if the phone is plugged in to the charger.
Thank you for the quick and to the point replies, I will try this later tonight and will post and let you know if it works out. I have tried the factory reset and it doesn't work, but hey it was free if I screw it up Its no big issue lol. Im not new to rooting its just I have no experience with this particular phone, so thank you =].
glitch666 said:
Thank you for the quick and to the point replies, I will try this later tonight and will post and let you know if it works out. I have tried the factory reset and it doesn't work, but hey it was free if I screw it up Its no big issue lol. Im not new to rooting its just I have no experience with this particular phone, so thank you =].
Click to expand...
Click to collapse
OK. Good luck.
The Root PB00IMG.ZIP and the "Official 2.1 RUU" can be found here:
Consolidated HTC RUU, Leak, and OTA Downloads
Amon_RA's original (v1.6.2) recovery is located here
If you don't have a version of fastboot on your PC/workstation already, you can find different platform versions of it a short distance down the HTC's developer page for the ADP.
If you can get the S-OFF bootloader onto the phone, then you can flash Amon_RA's recovery from the PC with a single command:
Code:
fastboot flash recovery recovery-RA-eris-v1.6.2.img
If you don't already have USB drivers installed on your PC, the RUU utility should be able to do it for you automatically (although ymmv depending on your Xp/Vista/Win7/x32/x64 variety).
Let me know how things go.
bftb0
PS It is worth repeating - make sure your phone is well charged when you are doing any flashing.
Yeah I know fastboot like the back of my hand(g1 and other phones that I love dearly but no longer have), im giving this a shot right now, thank bud.
glitch666 said:
Yeah I know fastboot like the back of my hand(g1 and other phones that I love dearly but no longer have), im giving this a shot right now, thank bud.
Click to expand...
Click to collapse
Standing by.
No matter what the official 2.1 RUU gives me a bootloader mismatch error 140 with either the actual rom.zip or the root rom renamed to rom.zip and placed in the temp folder, let me try some more things. Edit RUU says Im going from 2.37.605.4 to 2.36.605.1. Ok so this leads me to believe it has the 4th OTA on it right?
PS -
I might have mentioned it in that other thread, but anyway: the RUU utility will get the phone to cooperate if the phone is put into fastboot mode (or RUU mode). Normally it is expected that the phone will be booted normally when you start up the RUU... but that (obviously) isn't an option for a soft-bricked phone.
cheers
glitch666 said:
No matter what the official 2.1 ruu gives me a bootloader mismatch error 140 with either the actual rom.zip or the root rom renamed to rom.zip and placed in the temp folder, let me try some more things.
Click to expand...
Click to collapse
Rats. Does that happen immediately after the RUU starts up, or only when you tell it to begin the flashing operation?
Here's another wild straw to grasp at.
If you plug the phone into your PC, and then cold-start it (normal boot), do you hear 2 USB sequences at about 5 and 9 seconds, respectively? If the kernel is alive, but looping on something.... and the prior user had USB debugging enabled, and it's a 2.1 ROM, we can probably still root it by hand across ADB.
does "adb devices" give you anything 15 or more seconds after boot-up, or does your (Windows) device manager indicate a "Composite Interface"?
bftb0
Edit RUU says Im going from 2.37.605.4 to 2.36.605.1. Ok so this leads me to believe it has the 4th OTA on it right?
Click to expand...
Click to collapse
Sure sounds that way. Normally that info (the "Main Version") is stored in the misc partition, and it rather surprises me that an OTA install would cause that to happen; but I can't argue with what you are seeing.
That might mean that neither RUU nor PB00IMG.ZIP installs will work without being able to modify the RUU program to ignore version checks.
How about the adb angle - does anything come up on the USB when the 3 skating droids are showing?
No it goes all the way to the flashing processes after the phone goes into bootloader mode. then stops and gives me the error, now with adb when I turn the phone on I hear one chime and then get a device not recognized and no output from adb. Did you see my last post on the other page I edited it about the bootloaders, its says its going from 2.37.605.4 to 2.36.605.1. Sorry you posted before me so ignore this last tid bit.
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
BTW, when you say "bootloader mode" - do you mean FASTBOOT or RUU mode? (The RUU mode is just a graphic with the HTC logo in the middle of the screen, sometimes with small arrows in each of the 4 corners of the screen. FASTBOOT mode says either "FASTBOOT" or "FASTBOOT USB" right on the screen).
I would think that you are starting the process with the phone in FASTBOOT mode, right?
bftb0 said:
Sure sounds that way. Normally that info (the "Main Version") is stored in the misc partition, and it rather surprises me that an OTA install would cause that to happen; but I can't argue with what you are seeing.
That might mean that neither RUU nor PB00IMG.ZIP installs will work without being able to modify the RUU program to ignore version checks.
How about the adb angle - does anything come up on the USB when the 3 skating droids are showing?
Click to expand...
Click to collapse
I am not getting anything from adb.
bftb0 said:
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
Click to expand...
Click to collapse
Yup it stayed the same.
bftb0 said:
Long shot, but check your HBOOT screen again - is it still S-ON (1.49.0000) ?
BTW, when you say "bootloader mode" - do you mean FASTBOOT or RUU mode? (The RUU mode is just a graphic with the HTC logo in the middle of the screen, sometimes with small arrows in each of the 4 corners of the screen. FASTBOOT mode says either "FASTBOOT" or "FASTBOOT USB" right on the screen).
Click to expand...
Click to collapse
First I put the phone into fastboot mode, then fire up RUU and it kicks the phone to a black screen with an htc logo in the middle and trys to flash it(the RUU says its putting the phone into bootloader mode so I guess thats what its in when it restarts to the htc logo).
Don't Quote me but I know the Eris is Almost like my Hero, and with the Hero there's a way to Get it into the Fastboot I Think by Holding Volume Up and Powering on the Phone! Then you Should be Able to Run the Latest RUU for the Eris... Hopefully that will get you back Right!!
Good Luck!
Sent from my Hero using XDA App
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
I'm no pro but I have rooted and done all things root to 3 amazes. So you unlocked the bootloader. Did you flash a custom recovery? After that you should have perma rooted the phone by flashing the su.zip thingy. After that you should have preformed a backup. Then flashed the Rom. Take. The boot.IMG from the unpacked Rom placing it in the tools folder in androidsdk then flashing it in fastboot. This is how I do it. Always worked for me. In detail what did you do?
Edit. I also have s-on. Both on my girls amaze and my one s. I'm not sure if some roms require s off but I never had a problem flashing roms. Kernels are always easy using fastboot method.
Sent from my VLE_U using xda app-developers app
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
the order of what you just described doing some how seems entirely wrong... let me make a few corrections to what you should do
if you haven't flashed a custom recovery place your phone into bootloader mode (by removing the battery then reinserting and holding vol down + power button)
then enter FASTboot (by using the power button in the bootloader)... use hasoon2000's toolkit found Here in the second post (don't forget to hit thanks to his post)
flash 4EXT recovery, once in 4EXT check to make sure smart flash is enabled
once in 4ext recovery do a wipe DATA/FACTORY, followed by formatting SYSTEM then wipeing CACHE then DALVIK CACHE
after doing that proceed to trying to flash your rom again, if it fails download another ROM and use the MOUNT USB feature in 4EXT to mount your phone to the pc while in recovery and place another rom on your SD card to try and flash
overall the steps to flashing a rom on a "NEW" phone is Unlock Bootloader > Flash Custom Recovery > Flash SU for ROOT > BACKUP!! > Full WIPE > Flash ROM > BACKUP! if you require more info feel free to make another post
hope this helps
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
I dont know if u have fixed it but if you havent i sudget you search for this file "Stocked_Amaze_Deodexed.zip" and flash it as if you were flashing
a custom rom... this is stock ics From tmobile and its the only stock flashable zip that works with any recoverymod...
i would give u the link but i forgot what was the name of it and dont have it on my history but im sure you can find it with the name i gave you
ventus17 said:
im new to this whole rooting thing so please help a noob out.
So i unlocked the bootloader but unfortunately i tried to flash a rom while S-On; So now im stuck on the HTC screen. I tried to do the PH85IMG.zip thing but it doesnt seem to do anything. I would really appreciate any help guys (it sucks using a flip phone for over a week.)
the amaze is the tmobile version
Click to expand...
Click to collapse
Which RUU did you use? Personally, I'd suggest using THIS RUU.
Before using this RUU, make sure your battery is FULLY charged, and then make sure you have re-locked your bootloader. After that, rename the RUU to PH85IMG (usually the .zip part is already appended to the end, so if you add the .zip part, it'd actually be PH85IMG.zip.zip, which won't work)
Then add it to the root of your SDCard, boot into bootloader by taking out your phone's battery, putting it back in, then holding volume down button and power button. Keep holding those 2 buttons until the bootloader screen comes up. It will auto-detect the RUU and go from there.
After all's said and done, unlock your bootloader again, install a custom recovery - I recommend the 4EXT recovery - and then flash your ROM of choice.
Best of luck!
Replaced the screen on my Rezound and now I cannot get past the HTC white splash screen.
I can get in to BOOTLOADER and I found the VIGOR image on the SDCARD. It attempts to install but still can't get past the HTC splash screen.
Any help would be appreciative.
Is your phone rooted/unlocked? Can you get into fastboot or recovery? What ROM were you running?
acejavelin said:
Is your phone rooted/unlocked? Can you get into fastboot or recovery? What ROM were you running?
Click to expand...
Click to collapse
I was running CleanROM Standard. S-ON, with root. If I go in to RECOVERY the screen hits the HTC Flash then goes blank.
Thanks for the quick reply, hope to get back up and running soon.
Something is definitely messed up, so you can't even get into recovery?
Sounds like you lost your flash somehow. Can you "fastboot boot recovery.img" of TWRP or Amon Ra (I assume you were using AR since you were on CleanROM), and browse the partitions and see if the files are there? My best guess is you are gonna have to start clean, flash recovery, flash rom, fastboot flash boot boot.img, and see what happens. If that fails I would look at flashing the corresponding RUU to your Hboot version.
Ok.. I will give it a try. I have the Rezound All-In-One Toolkit, so I should be able to do this without any issues.
If I am wrong in my assumption, please let me know.
AzBrewsky said:
Ok.. I will give it a try. I have the Rezound All-In-One Toolkit, so I should be able to do this without any issues.
If I am wrong in my assumption, please let me know.
Click to expand...
Click to collapse
Ok.. This is what happened.. I removed my SDCARD and loaded BOOTLOADER. I went in to FASTBOOT and ran Hasoon's All In One kit for the Rezound and flashed recovery. I attempted to go in to RECOVERY and I get a blank screen. What I did notice is the loading bar on the right side of the screen never showed it was loading anything. The phone went to black screen, then nothing.
Until I can get in to RECOVERY, I can't load a ROM.
I even went to the command prompt and attempted to run it there, with no luck.
Update: OK.. I thought I would start over with the All In One tool. Seems my token key had changed. I got a new TokenID file from HTC and unlocked the bootloader (even though it was already unlocked) and ran the recovery. But I still get the same issue when entering in to recovery...
FML..
Skip the all in one tool kit... it's nice but you need to do this manually. Use the Fastboot commands to BOOT recovery manually, not flash it.
fastboot boot recovery.img (or whatever the name of the recovery image file is)
acejavelin said:
Skip the all in one tool kit... it's nice but you need to do this manually. Use the Fastboot commands to BOOT recovery manually, not flash it.
fastboot boot recovery.img (or whatever the name of the recovery image file is)
Click to expand...
Click to collapse
Manually attempted everything.. Lock, Unlock, fastboot boot, fastboot flash recovery, and nada..
AzBrewsky said:
Replaced the screen on my Rezound and now I cannot get past the HTC white splash screen.
I can get in to BOOTLOADER and I found the VIGOR image on the SDCARD. It attempts to install but still can't get past the HTC splash screen.
Any help would be appreciative.
Click to expand...
Click to collapse
I replaced my screen and had EXACTLY the same problem. My phone was fine for a couple of days and then this problem started. I have tried fastboot, loading zips from the ext card, everything you have tried except Hasoon's AIO. Nothing worked. I am also S-on & rooted. I was running Infection 8.2.1 and TWERP 2.6.3.0. I haven't flashed anything in many weeks. I didn't install any new apps. When I boot I get the htc flash screen for a few seconds and then a black screen.
geronimo48 said:
I replaced my screen and had EXACTLY the same problem. My phone was fine for a couple of days and then this problem started. I have tried fastboot, loading zips from the ext card, everything you have tried except Hasoon's AIO. Nothing worked. I am also S-on & rooted. I was running Infection 8.2.1 and TWERP 2.6.3.0. I haven't flashed anything in many weeks. I didn't install any new apps. When I boot I get the htc flash screen for a few seconds and then a black screen.
Click to expand...
Click to collapse
So you are in the same boat as I.. Nothing has worked..
I bought a used phone from Craigslist and have it running now.. I will be installing a ROM soon and then claiming insurance on the busted phone and pay the extortion fee to get another one.. I will end up with two Rezounds (I love this phone) and rooting them both and either have one for a backup or sell it to a friend for pennies on the dollar (what are friends for?)..
Otherwise I now consider it dead.. I will trash this phone to insure my insurance company can't start it to see that it has been rooted. Screw them..
Best of luck on your phone, but I have spent too much time on this one.. Better luck next time for us both..
MODS - CLOSE THIS THREAD
Hi all,
Since short I cannot start my DX anymore. It boots automatically into the bootloader (fastboot).
When I open recovery it stucks on the opening recovery screen.
When I flash a new recovery it keeps the same problem (already tried 4 of all the available).
When I do fastboot erase cache it still doesn't work.
The ROM is corrupt so that doesn't start too.
I have an unlocked S-Off phone with hboot 25.002 .
could somebody please help me?
I had same problem. The thing is that because you are S-off you must have flashed wrong rom for your hboot and that messed up the internal partitions.
I have also tried every solution you can think of but eventually the only fix was that I sent it to service. It was in waranty and they replaced the motherboard.
downgrade hboot, install ics-ruu and start from scratch.
http://forum.xda-developers.com/showthread.php?t=2667156
Damn!
I have removed my s-off because I thought it wasn't neccesary. Also the commands gave me errors.
But god no, ofcourse it was neccesary, it was a s-off thread.
Now I'm stuck..
Is there any way, or does it really have to be repaired?
Damn, that wasn't smart at all.
so your phone is S-ON now?
and your bootloader is locked/relocked?
no wonder nothing works...
just repeat the unlock-procedure at htcdev and you should be able to flash a custom recovery again.
Download windroid HTC desire x toolkit and install it on Windows pc. connect your phone in fastboot and install twrp recovery. Hope this will work.
dodialfaed said:
I had same problem. The thing is that because you are S-off you must have flashed wrong rom for your hboot and that messed up the internal partitions.
I have also tried every solution you can think of but eventually the only fix was that I sent it to service. It was in waranty and they replaced the motherboard.
Click to expand...
Click to collapse
Isnt there any solution to make it switch on again??Thanks
Begin12 said:
Isnt there any solution to make it switch on again??Thanks
Click to expand...
Click to collapse
me too i also have this problem
would be great to know what the phone's doing exactly? cause there's a huge difference in "not booting" and "not switching on"
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help