Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Riktar said:
Hey guys,
I've spent the better half of 8 hours looking on multiple forums/downloading roms/attempting to flash my cousin's GT-I9300.
I attempted KIES update and emergency maintenance and they both start freezing.
I attemped odin with a multitude of roms with the model & serial given by kies (PDA:LLB / PHONE: LLA / CSC: LL3)
I've even downloading android commander to no avail.
I've successfully rooted and flashed my i747 multiple times so i'm somewhat familiar with the odin flash process, but this is a bit unsual.. and frustrating lol.
The phone is in reboot cycle (loops after the samsung logo animation), won't let me access recovery but will let me get into odin recovery.
Odin seems to have failed at every stock rom flash...
ANY help?
Click to expand...
Click to collapse
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
chrismast said:
I assume with odin recovery you mean download mode? If so try to flash a stock ROM (maybe first a version that is from your region, you can find them on sammobile.com) via Odin and make sure that KIES is turned off (also from task manager, even better uninstall it). Do you have any error message showing up when you try to flash with Odin?
Click to expand...
Click to collapse
slaphead20 said:
Try the flash again, and if it loops, try booting recovery and doing a reset......yes,I know you said you can't get into recovery, but just try after the flash
Also remember it can take a few minutes to boot after a flash, so be patient and give it a chance
---------- Post added at 07:29 AM ---------- Previous post was at 07:28 AM ----------
Also what does the Odin log say/what stage is it failing at?
Click to expand...
Click to collapse
I've attempted to flash maybe 7-8 different roms. My cousin won the gt i9300 at a raffle overseas so thats why im unsure of what exact country it is. Is there a definitive way of finding which country exactly? I do know it was an unbranded rom and fully unlocked because he's been using it here (w/ straighttalk) for the past 6 months or so just fine i even flashed jellybean 4.1.1 when it was first released (via kies).
When I try to and get the version from kies it tells me (PDA:LLB / PHONE: LLA / CSC: LL3) but no country.. so idk if there's a definite way of finding this out. I'm downloading ICS rom and gonna try and roll back the rom as i've read some people did that and it worked.
Once i bring up download mode it says on the top (ODIN MODE) and binary download count YES (1 count) and rom as custom. I attempt to flash Odin it always fails right after system.img. never gets past i've tried to do multiple attempts(5-6) per rom but no luck yet. never gets past "downloading... do not turn off) phase.
thanks alot for the assistance guys!
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
Model Number under battery says GT-I9300 same thing that's prompted during kies for emergency recovery.. which downloads but ends up not recognizing it. Odin flash on the other hand recongizes it when i plug it but keeps failing.
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
EDIT:
Annandale is in UK right? On the 2nd link that i gave you the first firmware there is from UK so i think you can flash that one.
JJEgan said:
CSC more or less tells you the country .
Overseas first question then is it actually I9300 look under the battery .
jje
Click to expand...
Click to collapse
SignetSphere said:
LL3 is from Pakistan http://www.sammobile.com/firmwares/1/?model=GT-I9300&pcode=PAK#firmware
Try downloading any unbranded firmware cause it's pretty much it's the same thing. You can always change the csc after you flash your phone.
or Download the right firmware on the country on which you are right now.
Then follow the youtube guide here on how to properly flash it: http://forum.xda-developers.com/showthread.php?t=1646610. You can just skip the unrooting part i guess.
Click to expand...
Click to collapse
Yea i though it was from pain (LL3 rom listed on another thread) but i then foudn the PAK version so that's the one i downloaded but the 4.1.2 version. I downloaded 4.1.1 and 4.0 (ics) version so i'll give those a try too.
Phone specs as they appear on the back are :
Model: GT-I9300
FCC ID: A3LGTI9300A
SSN: -I9300GSMH
S/N: RF1C63KJ4RL
Okay goodluck on flashing your S3 I'm gonna sleep now lol. 12:11am here.
Gnite, gonna keep messing with this and see what happens.
Edit: Annandale. Virginia USA sry for the confusion.
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Riktar said:
Just tried the ICS and the 4.1.1 rom still fails at systems.img ... any ideas what else it could be?
Click to expand...
Click to collapse
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Riktar said:
thanks for the info! that first problem stated on there looks the exact problem i'm having, I'll try it asap and check back in with an updated.
Click to expand...
Click to collapse
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
SignetSphere said:
see this: http://checkrom.com/threads/nand-write-start-stuck-in-odin.920/ I hope that can help you.
Click to expand...
Click to collapse
SignetSphere said:
the pit files that was posted there was for the 64gb one if you are using the 16gb one so I've uploaded the pit files for all SIII storage models.
just take note of this:
GT-I9300_mx_20120220.pit = Galaxy S3 of 16 Gb
GT-I9300_mx_20120322.pit = Galaxy S3 of 32 Gb
GT-I9300_mx_20120329.pit = Galaxy S3 of 64 Gb
And make sure to follow the the instructions there. Likewise credits goes to the posters there and not me lol.
Click to expand...
Click to collapse
Thanks for the follow up and thorough info! i'll make a note of that when i do this later.
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
Get perkas file stash from Play store, I'm sure it has stock kernel
Edit....just checked, plenty of stock kernels to choose from
Andi has some handful of kernels here http://www.boeffla-kernel.de/index.php/2012-10-31-06-13-16/viewcategory/18 I just don't know if he has the kernel you are looking for.
thanks for links guys! i'll look up one i need and download it and check back in later.
Riktar said:
I installed the pit file and it installs properly, says Reset then i put the phone back into download mode and try to upload the roms (PAK) 4.1.2 and 4.1.1 as well as the latest 4.0.4 and all fails. this time it fails after NAND Write.. so idk... >< i'm gonna try and download an older version of ICS (probably end up downloading all 5 ICS roms on samsung site. I'm looking for a stock kernel as well to follow what the additional instructions of the guy on the link posted but i can't seem to get my hand on a kernel, anyone know a link to a stock gt-i9300 kernel?
in the meantime i'll start downloading the ics roms.
Click to expand...
Click to collapse
I had a similar problem, my phone just froze in the middle of a phone call, had to pull out battery, and when i tried to turn it on, it wouldn't pass the second "SAMSUNG" logo, just stayed there forever, with the blue light (Official JB 4.1.2 - not rooted)... Anyway, after 3 days of trying, downloaded bunch of firmwares, but all of them gave me the infamous "Complete(Write) operation failed". This is how I MANAGED to revive my i9300 16Gb Int:
1.Open ODIN, load ONLY the pit file corresponding to your phone (In my case i9300 16Gb Int'l - GT-I9300_mx_20120220.pit), check "Repartition" and "F.Reset Time" and hit "Start".
- If this step goes OK (All threads completed. (succeed 1 / failed 0))
2. Click on the "Reset" button in Odin (or close and re-open it), in PDA select "recovery-cwm-touch-6.0.1.2-i9300.tar", make sure only "F.Reset Time" and "Auto Reboot" are checked, and flash it. If everything goes OK, you should now have CWM instead of Stock recovery.
3. Take any microSD card, any size, and put THIS file on the root of the microSD using a card reader or whatever you prefer - but be careful, copy the zip as it is - do not unzip it.
4. Insert the memory card in the phone, enter recovery*, and select "Install zip from External Storage" and choose the file you put on the root of the card (by the way, it's a 4.0.4 downgrade bootloader), it should flash in a second, the phone will restart, and that's it!
5. Download and flash 4.0.4 Stock FW using Odin (i used "I9300XXBLH1_OXEBLF1.zip"), everything should go OK, and the phone will be bootable again.
*(my phone didn't wanted to enter recovery the old fashioned way using 3-button combo, but i managed to enter recovery from charging mode, by connecting the charger on a switched off phone, and as soon it starts charging press Vol Up + Home + Power, and when the FIRST Logo (Galaxy S III GT-I9300) appears, let go of the power button, keep pressing the Vol Up + Home, and it enters recovery).
Related
Hey guys, new here (obviously). I'm also fairly new to flashing/rooting on Android in general.
I flashed my phone to one of the leaked ICS international versions (when I boot up my phone it says "Samsung Galaxy SII GT I9100" from Gingerbread. I did this a couple of days ago. There are a few problems main one being I can't use the phone app for my phone (ironic).
So since the ICS official version for the US AT&T phone came out, I was wondering.
How can I flash my phone to the stock ICS version? Any help would be great and I hope I did not post in the wrong section :\
Thanks so much in advance guys.
Download KIES, install the proper drivers, plug in your phone, update.
Although you probably messed up your phone flashing firmware for the wrong model....
BTW, you might want to at least make an attempt to read before making a thread. There is a thread already dedicated to upgrading your phone to the official AT&T Gingercream Sandwich update
At least pretend to look like you are genuinely interested. Or you know, follow the rules you agreed to upon signing up in the forums
Sent from my HTC One X using Tapatalk 2
Boot into download mode using the standard I777 method: with phone off, hold down vol+ & vol- while plugging in USB cable. Post back what the flash counter says.
creepyncrawly said:
Boot into download mode using the standard I777 method: with phone off, hold down vol+ & vol- while plugging in USB cable. Post back what the flash counter says.
Click to expand...
Click to collapse
I don't think the standard method is working. Just shows the battery on screen.
and in response to the kies reply; when I plug in the phone and sync it up with kies, kies says "Your device does not support firmware upgrade through kies" or something along those lines.
In response to the other guy, I'm terribly sorry, maybe you could help by posting a link to that thread? I tried looking around seeing if there was anything related to my issue and I couldn't find anything. Forgive my noob status?
Thanks guys.
I used the method that worked though. Held down power, vol down, and home..
ODIN MODE
PRODUCT NAME: GT-i9100
CUSTOM BINARY DOWNLOAD: NO
CURRENT BINARY: SAMSUNG OFFICIAL
looks like you need to read around and learn how to flash the secondary bootloader for UCKH7. It will change it back to the correct boot screen too. At least, that's what I think. I had to do it the other day after working on rooting the new LE5 stock.
Read the links in Creepy's signature.
To return your phone to I777 stock, flash the UCKH7 CL503881 stock binaries. The one-click downloader is the easiest. You will find the firmware in the Download Repository, link in my signature. This is the package that includes bootloaders and param.lfs.
Edit: I have been assuming you have the I777. This is true isn't it?
After you are at UCKH7 stock, you can use kies to update to stock ICS, or you can flash UCLE5 which is also in the Download Repository, at the bottom.
kk. I think what I'm gonna do is flash is completely back to stock gingerbread using one of his links and odin.
and plug it in through kies and see if that works to update it to ICS official.
Thanks guys! Sorry I caused such an uproar.
Thanks Creepy!! I will do just that
yes that is correct; I have the SGH-I777 At&t Samsung Galaxy S2.
It appears the one click exe that reverts my phone to stock software actually STOPS and "FAIL"s on the part where it's flashing the "cache."
My phone says "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again."
Fortunately when I went download mode the top right corner says SGH-I777
instead of the international version.
I've tried the one-click several times and it still does not work. :\
Any advice?
Edit: Kies is not recognizing my phone ; "device not responding"
thanks again.
Make sure you have the USB Debugging mode turned off. It took me a few minutes to figure that out when I was trying to upgrade from Gingerbread to ICS via Kies earlier.
Not sure what's hanging it up. From your report, it appears that the secondary bootloader was successfully flashed. Do you recall what other steps completed before the fail?
You should be able to boot into recovery by holding vol+, vol- and pwr. Hold down until you enter recovery. Then wipe data/factory reset. Then try to flash the UCKH7 stock package without bootloaders. The link is in the return to the store guide linked in my signature. Or flash one of the stock plus root packages.
Hey thanks Creepy!
I really hate using the one-clickers, had no luck with 'em :|
I'd much rather use the blank Odin 1.85 exe I have that lets you fill in the files.
If I use that and the ---Return/Unbrick to Stock + Root: I777_UCKH7_OCD_Root_No_BL.7z (This contains the kernel, rooted system image, and modem.)--- download, what do I use for the bootloader slot or do I leave that empty?
thanks
SoloBuggMaster said:
Hey thanks Creepy!
I really hate using the one-clickers, had no luck with 'em :|
I'd much rather use the blank Odin 1.85 exe I have that lets you fill in the files.
If I use that and the ---Return/Unbrick to Stock + Root: I777_UCKH7_OCD_Root_No_BL.7z (This contains the kernel, rooted system image, and modem.)--- download, what do I use for the bootloader slot or do I leave that empty?
thanks
Click to expand...
Click to collapse
That's a one-click downloader. If you want to flash the full package, there is a tar.md5 file in the Download Repository with everything in it, but it's all in one package, including the bootloaders, so you put it in the pda slot and it's the only file you flash.
In the Download Repository, there are also tars for Entropy512's packages which you can flash in Odin3. They are also one file tars and go in the pda slot. You can read about each one.
I'm not sure you need to flash the bootloaders again. I'd try to wipe data/factory reset and then flash a stock package without bootloaders first.
Applied the one-click with root Flash and now I'm back to gingerbread.
gonna see if I can get ICS working through kies..
looking good!!!
So my phone won't open.
I keep clicking the android but it keeps saying the google services framework has crashed.
and it won't connect to kies..
any ideas?
SoloBuggMaster said:
So my phone won't open.
I keep clicking the android but it keeps saying the google services framework has crashed.
and it won't connect to kies..
any ideas?
Click to expand...
Click to collapse
Since ur rooted why not just flash the rom in cwm? The official release is found here http://forum.xda-developers.com/showthread.php?t=1650948
Sent from my SGH-i777 using XDA
thanks bud!
I guess you just drop that file onto the phone using file explorer and USB connection,
then go into recovery to update via cwm?
SoloBuggMaster said:
thanks bud!
I guess you just drop that file onto the phone using file explorer and USB connection,
then go into recovery to update via cwm?
Click to expand...
Click to collapse
Yup just make sure u wipe data wipe cache and dalvik cache. U could also just download it to ur phone and move it via astro or whatever file manager app u have
Sent from my SGH-i777 using XDA
Only one button, "Close program" is available to me. What do I do?
Further info:
I followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which I also verified using a video on youtube)
The Odin window is fuzzy white but I can see it got to the stage Check MDF /// Please wait
I was in the process of flashing stock firmware taken from Intratech's androidfirmware.net site.
The phone is brand new, I was flashing back to stock from AOKP because of an issue with the phone calls not sending or receiving any sound
EDIT: After 5 minutes, I faced my fate and clicked it. I tried again with Odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have I bricked my brand new phone? :crying:
Odin downloads nothing its an installer .
One stop Kies running via Task Manager
Two connect with Samsung USB cable to a mainboard port only .
Three i suggest you download a new copy of the firmware and also of Odin just in case .
Four start again following instructions as posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
kelevra7 said:
Only one button, "Close program" is available to me. What do I do?
Further info:
I followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which I also verified using a video on youtube)
The Odin window is fuzzy white but I can see it got to the stage Check MDF /// Please wait
I was in the process of flashing stock firmware taken from Intratech's androidfirmware.net site.
The phone is brand new, I was flashing back to stock from AOKP because of an issue with the phone calls not sending or receiving any sound
EDIT: After 5 minutes, I faced my fate and clicked it. I tried again with Odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have I bricked my brand new phone? :crying:
Click to expand...
Click to collapse
Hi again, if u can get into download mode you're OK. If not ,u need to buy a USB jig from ebay to get into download mode.
If u can get into download mode,do this..go to development forum and download "galaxy s3 toolkit v3" and Dl. To pc.
Now go to samfirmware.com and register. Go to galaxy s3 firmware and select LFB rom and download it to your PC. Extract the zip file so u end up with 3 files(maybe5) u need PDA, phone and csc files. Put in place on your PC so its easy to find. Now run the toolkit and follow instructions on how to flash.(use numbers to navigate and enter to select)
Ps. Password is samfirmware.com to extract the rom.
write me if u need assistance or here
JJEgan said:
Odin downloads nothing its an installer .
One stop Kies running via Task Manager
Two connect with Samsung USB cable to a mainboard port only .
Three i suggest you download a new copy of the firmware and also of Odin just in case .
Four start again following instructions as posted here .
http://forum.xda-developers.com/showthread.php?t=1671969
jje
Click to expand...
Click to collapse
Hi JJE, thanks for the reply!
This was indeed the guide that I was following. Yet I have repeated the steps to no avail. The phone now hangs at the SAMSUNG screen and glows when I try and switch it on normally.
This was in fact the second version of the same firmware I am trying to flash, the first being a hotfile download linked from this site. How should I proceed now?
kelevra7 said:
Hi JJE, thanks for the reply!
This was indeed the guide that I was following. Yet I have repeated the steps to no avail. The phone now hangs at the SAMSUNG screen and glows when I try and switch it on normally.
This was in fact the second version of the same firmware I am trying to flash, the first being a hotfile download linked from this site. How should I proceed now?
Click to expand...
Click to collapse
Have u tried to reboot into download mode again?
zodiaxe66 said:
Hi again, if u can get into download mode you're OK. If not ,u need to buy a USB jig from ebay to get into download mode.
If u can get into download mode,do this..go to development forum and download "galaxy s3 toolkit v3" and Dl. To pc.
Now go to samfirmware.com and register. Go to galaxy s3 firmware and select LFB rom and download it to your PC. Extract the zip file so u end up with 3 files(maybe5) u need PDA, phone and csc files. Put in place on your PC so its easy to find. Now run the toolkit and follow instructions on how to flash.(use numbers to navigate and enter to select)
Ps. Password is samfirmware.com to extract the rom.
write me if u need assistance or here
Click to expand...
Click to collapse
Hi again! Sorry to take up so much of your time Do you mind if I ask what the LFB rom is? I think I know how to get back to AOKP but I need to revert it to the stock firmware so I can return my handset.
kelevra7 said:
Hi again! Sorry to take up so much of your time Do you mind if I ask what the LFB rom is? I think I know how to get back to AOKP but I need to revert it to the stock firmware so I can return my handset.
Click to expand...
Click to collapse
Its just the latest firmware and samfirmware.com is "official" Samsung firmware site
You may want to try this
http://forum.xda-developers.com/showpost.php?p=28644811&postcount=2
Worked for me
I also wiped using stock recovery afterwards
zodiaxe66 said:
Its just the latest firmware and samfirmware.com is "official" Samsung firmware site
Click to expand...
Click to collapse
For_itembine said:
You may want to try this
http://forum.xda-developers.com/showpost.php?p=28644811&postcount=2
Worked for me
I also wiped using stock recovery afterwards
Click to expand...
Click to collapse
Thanks for the link but I cannot access CWM recovery. I have since fixed it by simply repeating the process with yet another version of the firmware. This time I followed it up with a factory reset that I accessed through [power+volume up+home] combination. I have used up my daily limit of thanks but will come back tomorrow to give credit where it's due. Thanks everybody.
Odin stop working when finally i click start button
Odin stop working after click start button and also i connect back panel usb port of cpu box
kelevra7 said:
only one button, "close program" is available to me. What do i do?
Further info:
i followed the steps in this post to the letter: http://forum.xda-developers.com/showthread.php?t=1671969 (which i also verified using a video on youtube)
the odin window is fuzzy white but i can see it got to the stage check mdf /// please wait
i was in the process of flashing stock firmware taken from intratech's androidfirmware.net site.
the phone is brand new, i was flashing back to stock from aokp because of an issue with the phone calls not sending or receiving any sound
edit: After 5 minutes, i faced my fate and clicked it. I tried again with odin v1.85 to no avail. The program also crashed 2 seconds into the process. Have i bricked my brand new phone? :crying:
Click to expand...
Click to collapse
i have tried different methods to fix this
first thing i did was use odin to put a stock rom on my phone that didn't work with and without pit
then i tried using odin with another stock rom where you had to use bootloader, pda, phone and csc instead of just pda, when i tried this it just stays on datafs and does not move with and without pit
the other thing i tryed was going into recovery mode and putting CF-root and installing CM9 via zip all that did was make the phone stay on the CM9 splash screen
is there something i have missed?
You probably have damaged /data partition.
Have a look at this thread, it may be helpful in your situation.
fxrb said:
Have a look at this thread, it may be helpful in your situation.
Click to expand...
Click to collapse
i have tried that this is where it gets stuck on data
how can i fix the data\ partition
can anyone help please
What model phone do you have? It is printed on the label under your battery.
And what did you try to flash, EXACTLY? (links would be helpful)
Usually getting stuck like this means you were flashing something not meant for your phone.
EDIT: also, there are instructions for installing CM9 on this thread which are supposedly "noob proof". Were these the instructions you followed?
ctomgee said:
What model phone do you have? It is printed on the label under your battery.
And what did you try to flash, EXACTLY? (links would be helpful)
Usually getting stuck like this means you were flashing something not meant for your phone.
EDIT: also, there are instructions for installing CM9 on this thread which are supposedly "noob proof". Were these the instructions you followed?
Click to expand...
Click to collapse
model: GT-I9100
I9100XWLPT_I9100XXLQ6_I9100XEULPA_XEU this one
VillainROM-SGS2-v1.0.tar.md5 this one
and this one I9100XXLPH
yeah i have upgraded CM loads of times with no problems when ever a new nightly comes out i upgrade if the reviews are good
liammozz said:
i have tried different methods to fix this
first thing i did was use odin to put a stock rom on my phone that didn't work with and without pit
then i tried using odin with another stock rom where you had to use bootloader, pda, phone and csc instead of just pda, when i tried this it just stays on datafs and does not move with and without pit
the other thing i tryed was going into recovery mode and putting CF-root and installing CM9 via zip all that did was make the phone stay on the CM9 splash screen
is there something i have missed?
Click to expand...
Click to collapse
Please provide these info:
-Your phone model no
-Your old ROM details
-the detail of the firmware you were trying to flash via Odin.
Swyped from my Samsung Galaxy SII
was that the information you needed?
Have you tried flashing a stock firmware and factory reset?
Sent from my brain using telekinesis
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Hi Marcus,
I had the same problem few days back.
If it's not broken by you trying something fancy, the best solution is to take it to service centre. If you have rooted your device, had installed some custom firmware or are not willing to visit the service centre for some other reason, please read ahead.
All I did was,
Installed USB connectivity drivers through Kies.
Installed ODIN 1.83
Ensured that Kies or any of its processes are not running in background.
Downloaded the official SGS2 firmware
Flashed the firmware through ODIN.
It took around 10 minutes for the full process and I was having my mobile up and running. Using ODIN sounds scary initially if you haven't used it. I have slowly started gaining confidence in it after using it a few times.
Please note that though the process is well proven to be safe, there is still an amount of risk involved.
Sent from my GT-I9100
Download a siyah kernel(like v4.0.1) .tar file and flash through odin.
See if that makes it boot/lets you into recovery.
Adarzannh said:
Sounds like the symptoms of a NAND RW corruption. Try this http://forum.xda-developers.com/showthread.php?t=1457458
Click to expand...
Click to collapse
I appreciate all of your answers!
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
<ID:0/003> NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
mananbdesai: where do I find the "official SGS2 firmware"?
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
marlu873 said:
Adarzannh: I tried the guide but when flashing using odin I get stuck on:
NAND Write Start!!
both when trying to flash the recovery package and the kernel. Any clues?
Click to expand...
Click to collapse
A couple of things..ensure KIES is not running on your computer in the background. If possible delete it completely. Also ensure your phone is connected to a USB port directly on the computer and not via a hub or to a USB port on a keyboard or something. Odin is a finicky s/w..so..
Also, try different versions. If v1.85 doesn't work try v3.4
marlu873 said:
mananbdesai: where do I find the "official SGS2 firmware"?
Click to expand...
Click to collapse
Go to sammobile.com or a sticky in the Original Android Development section here..has links to all the stock firmwares.
marlu873 said:
theunderlining: is it enough just to flash a new kernel or do I afterwards need to flash ROM too?
Click to expand...
Click to collapse
Lol at underlining. if you flash a custom kernel like siyah, you'll be rooted and get CWM. Using that you can install a custom ROM.
Sent from my GT-I9100 using xda app-developers app
And youll be safe from the 4.0.4 brickbug if you flash siyah.
You flash a kernel for various reasons like it has emmc cap disabled,you can tweak it etc.
You can flash siyah kernel and stop there.Or you can move onto a custom rom.
Whatever,when its done-backup your efs and make a nand backup.
And yesterday I was downgrading my wifes phone onto 4.0.3.I was using odin and kept getting "failed".After 3 attempts I realised I hadnt put the phone into download mode..........how stupids that......lol
hi there, just wondering, after Flashing the stock firmware through ODIN, do you lose everything in your phone? i need to get all the notes that I have in my phone (notes from the samsung stock apps). I dont have any external sd card in the phone. thanks in advance for the reply.
enquiry
marlu873 said:
Hi all!
I have a Samsung Galaxy S2 which I since a week cannot start. It get stuck on the black/white samsung logo. I cannot enter recovery mode, nothing happens when releasing the power button after pressing volumeup+home+power buttons. I can however reach download mode. I'm not sure what caused this problem, one day I just couldn't start it. I read on forums that many similar problems seem to have occurred when upgrading android but I'm not sure this is the case here (unless the phone made an automatic update while I was asleep). I'm not sure what version of android I'm running, but I'm pretty sure it is at least the ICS.
I would like to hard reset my phone if possible. It seems to be easiest through the recovery mode which I cannot get into.. I read things about Odin, connecting the phone to the computer and downloading android to the phone but haven't quite grasped it. Could anyone explain this option for me or point me in the right direction? Are there other options?
I would appreciate any help, especially since my 1-year warranty expired a month ago!
Best regards,
Marcus
Click to expand...
Click to collapse
Hi there sir,
Has the problem solved ? Care to share the solution ?
Thanks.
i had the same exact problem, i tried flashing with odin n stock firmware but stuck in NAND write start, i didnt try flashing with PIT & repartition though, i couldnt be bothered anymore, so i took it to samsung service plaza, they told me the problem is in the main PCB (hardware issue), so all they did was replace that n it got fixed! i didnt pay because it's still under contract/ carrier warranty
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
it seems for some strange reason the phone wont turn on now. Wheni plug it in i get the blue flashing dot but its faint. Tried download mode and nothing.
same problem
araz.rozh said:
Can you get into downloading mode? It's by hold and pressing volume down+home+power
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
my phone is stuck at the bootlogo too. but mine is rooted n running on biftor rom (jellybean) pls how do i flash with odin? thanks
help pls.
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
tatchero said:
Pls guys I have the same problem but like I said earlier mine occurred while I waS tRyna backup my ROM. Plss can I get a detailed guide on how to flaSh my samsung galaxy SII GT19100. ItS verion; jelly bean 4.12.Its rooted n runs on a custom ROM( biftor). Plss guys help. Thank you.
Click to expand...
Click to collapse
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Flash-IS-Bright said:
I had a similar problem, stuck at boot with Biftor v12, which happened after I tried to update SuperSU binary through CWM/TWRP. I don't know why it stuck at boot and why it wouldn't reboot to Recovery. Download mode was still working, so I had no choice but to flash new kernel through ODIN and see if it works.
So if your symptoms sound similar to mine, here's what I did to be able to boot again:
I REPEAT, SIMILAR TO MINE. MY SOLUTION MIGHT NOT NECESSARILY APPLY TO YOURS.
1. Download a suitable kernel in tar.md5 format. I used PhilZ-cwm6 v4.93.6 for XWLSN firmware (see OP http://forum.xda-developers.com/showthread.php?t=1877270)
2. Download ODIN, if you don't have it, found here http://forum.xda-developers.com/showthread.php?t=2189539
3. Once installed, boot your phone in Download mode by pressing Vol Down+Home+Power together until you see a warning dialog. Press Vol UP to get into download mode.
4. Make sure ODIN is running, and NO KIES processes are running.
5. Connect your phone with USB cable to your PC.
6. In ODIN, you should see a COM port with yellow background.
7. Click the PDA button ONLY.
8. Select the kernel file you downloaded.
9. Press Start and nothing else.
10. If everything went as expected, your phone should reboot after a while with a working Recovery.
Only do the steps if you are absolutely sure. This worked for me, and I hope it gives some tips for your problem as well.
Click to expand...
Click to collapse
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
peshmann said:
Hi Flash-IS-Bright
I have the exact same problem with SuperSU on my rooted Galaxy S2. I updated the SuperSU app, and when I opened it, it recommended me to update the binary, I selected the CWM/TWRP option and then my phone tried to reboot but is now stuck. It can only access download mode.
In doing the process above, you only flashed the kernel? Did this totally work? And all your apps/messages were left intact on your phone?
Any help is appreciated.
Click to expand...
Click to collapse
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Sun90 said:
when ur updating the binary u should always choose the 'Normal' thing instead of the 'CWM/TWRP' one ma8
if u flash a kernel it will not delete anything on ur phone, all u have to do is to select the right kernel like 'Philz' for example (if ur on a stock JB firmware) and flash the same through 'ODIN' and reboot ur phone
Click to expand...
Click to collapse
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
peshmann said:
Thanks for your help. I've originally had Jeboo 1.2 kernel on my phone and tried to reflash that again through Odin. It passed, however I'm still encountering the same problem of the bootloop.
Would flashing a different kernel help? I'm on stock JB firmware but with a Jeboo kernel. I am happy to try another kernel (if that would not brick my phone)
Do you have any other suggestions to help me solve this?
Again thanks for your help
Click to expand...
Click to collapse
You could try flashing hawkerpaul's kernel wiper first and then install another stock kernel like PhilZ or Apollo, and see if that helps.
Neat Rom lite,suddenly struck in boot loop after 1 month of operation.
Dear All,
I have installed the "I9100XWLSZ_NeatROM_Lite_v5.0.1" custom rom and after 1 month of successful usage, today suddenly the phone was dead.(probably due to autoupdates over wifi) . I tried to reboot, but didnt. Tried to restart but got stuck in the logo screen with yellow triangle.
Tried to enter recovery mode, but no use. Only download mode is possible.
Tried to flash the stock rom using odin, but no use, Nand write failed.
Can somebody help me how to come out of this situation. Shall I install a different kernal and see?
Regards,
Maka11
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
dixielee said:
Hi Guys,
I'm new to this Forum and very new to Android. I have the Galaxy S2 and while attempting to install Clock Work Mod, following the instructions from GalaxyS2Root, all of a sudden the phone locked up at the Samsung Galaxy S2 sceen with the yellow exclamation mark and that's as far as I got.
With great difficulty, I can get into the recovery screen, but I haven't got a clue, what I can do from here.
Is the phone recoverable, or have I just destroyed a brand new phone? I don't have a rom zip on my sd card, so I couldn't install a new rom from the card.
I have tried everything to get it going again, but I think the more things I try, the worse it gets. I think I have now wiped the existing rom off completely and wiped the caches, all because I was panicing.
I even thought of removing my sd card, putting it into my wifes Galaxy Ace and downloading a replacement rom to it and then try to install the new rom back to my phone.
But guys, I'm really panicing here and don't know what to do!!
Can anybody please help me out, or do I now throw a brand new phone into the garbage?
Thank You.............dixie (Help Please)
Click to expand...
Click to collapse
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Hello,
You could try downloading the rom required and install using odin.
You will need to make sure you get the right version for your phone and use odin to flash.
I've not done exactly what you have before I got into a simple boot loop and had to re flash. Live and learn I guess!
http://forum.xda-developers.com/showthread.php?t=1457458
Sent from my GT-I9100 using Tapatalk 2
Thin_Bezel said:
Just flash a new firmware via odin.It will be new again
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your reply,
But how do I connect my phone to Odin and what menu should the phone be in, in the recovery mode?
Doesn't the phone have to be in the download mode?
I can only seem to get into the basic recovery mode, ie volume up + power + home keys.
Regards..............dixie.
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
killall said:
Have you tried to get into download mode (volume down + home + power)?
You should be able to do that if you can get into recovery. Once in download mode, connect to your PC, start Odin and choose PDA, then select the tar that you have downloaded (it will be in zip form until you unpack it).
Read some threads about Odin/Download mode before you start and make sure you are happy to proceed.
Click to expand...
Click to collapse
O'k I did as you told me, but the first strange thing is, when I extract the zip file I get the following: boot.bin, cache, factory fs, hidden, modem.bin, param.lfs, Sbl.bin and zImage.............there is no exe type file!!!
However if I open odin, click on PDA and enter the whole zip file location and press start, everything goes ahead as planned.
I get a "Pass" and the phone restarts, I get the small tune and the blue moving lights on the screen, but then it just jams up, on the S Samsung Galaxy S2 screen. That's as far as the boot sequence goes.......frozen on the Galaxy S2 Screen!!
Any suggestions?
Regards......................dixie.
Pull out the battery, wait a few seconds replace and try to boot again. If that doesn't work, check you have the correct firmware to flash and try again with Odin.
Or have a look at this thread:
http://forum.xda-developers.com/showthread.php?t=1457458
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
TheATHEiST said:
Right, for starters you need to give relevant information if you expect accurate help otherwise you're going to end up screwing your device up.
Which model of S2 do you have?
Which rom do you have? (give link)
Which guide did you follow? (give link)
If you can get into cwm its just a case of "wipe data/factory reset" and then flash custom rom of your choice from sdcard. Just go into cwm>mounts&storage>mount USB (this will mount cards onto PC if connected) so once connected copy your rom across.
I recommend the new wannam lite rom if you want new samsung JB based rom.
If you want to flash via ODIN then you should only be flashing a .tar or .md5 file in PDA section. If your extracting a zip and you get all the files you mentioned in your above reply then you have wrong file.
Click to expand...
Click to collapse
O'k thank you for your reply and thank you to the others that replied.
I was using an incorrect rom to flash and an incomplete rom at that!
I downloaded a different rom, extracted the files and flashed with odin. Now I am up and running and have the phone back to full woking order.
That was pretty scarery stuff and I thought I had bricked the phone for ever, I guess a little knowledge is helpful but dangerous, if one isn't sure of what they are doing.
Thank you once again for your help, it was much appreciated. I'll contact you again no doubt, next time I create a stuff up.
Regards.................dixie.
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Ignore the above post guys, a little more reading and I found my mistake.
However, I am still interested in the suggestion of a Custom Rom, which would work successfully, on Australian Networks.
Cheers to All......dixie.
dixielee said:
Hi Guys, one last request. I would like to root the phone and after a considerable amount of reading/research, the root file that I require, seems impossible to find. When I do find it and download, the .rar file is empty except for a zImage file!!!
My phone is the Galaxy S2 i9100 running ICS 4.0.3 Baseband Version i9100XXLPQ Kernel Version 3.0.15-i9100XXLPQ-CL223505 Build Number IML74K.XXLPQ.
I bought this phone, while I was visiting China and it has been great, up until I managed to brick it by accident.
Anyway, I apparently need the CF Root for XXLPQ v5.4, which I have downloaded six times, from various sites and every time I extract, it's empty, except for an image file!!!
I live in Australia and use the Telstra Network.....should I change to a more suitable Firmware, or maybe a stable custom rom, or can someone give me a link, for the appropriate working CF Root file?
Much Appreciate and Thank You........dixie.
Click to expand...
Click to collapse
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
AnubuRe said:
I'm still new myself here but i'm sure ur phone is already rooted from what u said above. When u boot into recovery does stock recovery load or CWM ? if anything other than stock Samsung recovery then your already rooted.
Also u dont need to unzip the rar file its ready as is.
If ur phone is actually not rooted by far the easiest method is here http://forum.xda-developers.com/showthread.php?t=1501719
u dont need an insecure kernel and theres no risk involved even if u mess up. I was a lil hesitant to root my phone but used that method and all went fine, now i've learned so much in the past 2 weeks i'm flashing other kernels and tried lots of roms.
Peace
Click to expand...
Click to collapse
Yes thanks for the reply. I discovered that I didn't have to extract the root file, as it was already a .tar (stupid me).
So now I have a rooted phone and the Official ICS version XXLPQ, which is working in Australia, but I have noticed, that most of the time the Network is showing "edge".
All I really have to find now, is a good, stable, custom rom, that will also work in Australia.
A couple of observations....
You don't need "a good stable custom rom that will also work in Australia". Region has nothing to do with how a rom performs/your experience with that rom. If you're having issues with connectivity/you're not happy with data speeds, flashing/trying other modems may help. I suggest you read through this thread, at various times people have discussed which modems have worked well with different carriers (particular modems seem to work well for most people using a particular carrier). You can then search for CWM flashable versions of these modems & test them out until you find one that gives you connectivity you're happy with.
The other observation is you're a bit lacking in the 'basics'. I highly recommend you take the time to read through the guides. Knowing the basics makes it less likely you'll bork your phone at some stage, and that you'll be able to solve any problems that come up in a methodical/logical way (as opposed to guessing).
........a bit!!!!!!
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
O'k thanks guys.:good:
Thin_Bezel said:
Since you are on 4.0 3 ,why don't you flash the official jelly bean XXLS8 update via odin? Than root it with cf root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Use Siyah kernel v6 beta4 instead.