hi im new to this site and useing roms and flahing kernels ive tried a few but im basically asking you guy this.
Which is the best rom prefrably new release which supports touch pads and runs smooth. And also i have button stickng issues with the touch pads when on mc3 and bia2 grr it frustrating and suggestions.. Thanks in advance for you help
currently on
xperia play r800i
bootloader unlocked
nxt2bean
doomlord kernel 14[/color
hello guys i have a problem?
that i have installed mc4 1.0.1 some days ago and it works fine. but i have re-flashed my rom and now its not working. i hav tried every method
availble in the google, and forums around, nothing is working a need help..... game starts and then splash screen appears and then game closes it self.
i have mwakious 3drom 16.4.20 and kernel version is [email protected]))
IF any one have working game please let me know his rom info and kernel version.... thanks
Hello guys , im here because i recently update my s3 to the Sensation rom v9 based on 4.3 official . as many users around i like gaming on my phone, the fact is that i like very much the NFs Most Wanted . i've never had issues with it on previous roms (4.1.2 or 4.2.2) actually is the best graphics ive seen on a mobile racing game.. Now im on 4.3 (i tried the official and some other custom 4.3 roms) and the results are the same. Nfs Mw keeps going so slow. It keeps frezing from time to time, and even some times when im starting the game it force closes. i beleave this i not a game version issue because i tried another versions too. and the result are the same. Maybe this is a kernel problem? (BTW the sensation v9 rom uses 4.3 china kernel mixed up with 4.3 UK files) .. is anyone having this problem with this or any other game?
Hello friends.
I am new to this wonderful community and very happy to be a part of it.
I am facing a very strange problem. I am trying to update my WT9i Live with walkman from Gingerbread to Ice cream sandwich. Problem is .. whenever I flash an ICS rom my touch doesn't work !! Everything else works fine (physical keys / network / audio). Then if I install GB rom again it works flawlessly.
I have unlocked bootloader.
I am using Flashtool to flash stock roms.
* WT19i_4.0.2.A.0.58_(1254-1868).ftf = works
* WT19i_4.0.2.A.0.62_(1254-1889).ftf = works
* WT19i_4.1.B.0.431_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_Generic.ftf = touch doesn't respond
* WT19i_4.1.B.0.587_CUSTOMIZED CE3 WORLD I 1254-1889.ftf = touch doesn't respond
I have no idea what could be the reason. Any GB roms works smoothly. Any ICS roms bricks the touch screen. I have tried custom kernel (mesa .. kappa) and many custom ICS rom .. same problem. But at any moment I flash GB rom .. everything works.
I did all the research I could (for last 4 days) and read many threads .. tried many things. Nothing helped.
Please help me! Please Please Please.
I have seen many threads with problem "touch does't work because of flashing wrong rom or kernel".
I don't think that's my case. Because whenever I flash a stock GB rom .. it works just fine. Problem happens with ICS roms .. custom or stock.
I am going to try some custom GB rom with custom kernel. I'll post if that works.
This thread is most likely my last hope of finding a solution .. please help!
Just out of curiosity downloaded the 587 ICS generic rom from flasstool website then flashes it .. same touch problem.
Now downloading latest Nightly CM10 coconut. I'll try it. CM 9.1 stable did not worked .. same touch problem.
Please Help ! I dont see a clue ! Why ICS roms would freeze my touch when everything else works? I am on the verge of throwing my phone out of window !!!
Latest CM10 Nightly build = same problem .. touch screen is not working.
Flashed Stock GB = everything is fine !
:crying::crying::crying::crying::crying:
Now I am downloading every regional roms of stock ICS .. its all I can think of.
I know its a very old phone and update / development for it completely stopped. Its forgotten. Still I love this little cute handset and I would love to get ICS on it (for app support .. many app do not work on GB .. like google chrome).
So please help !
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Pixelado said:
Hello there!
Quick question: has your LWW ever been repaired? Like, had it's touch digitizer replaced or manipulated in any way?
I know some replacement parts can conflict with non-stock (or "comes-out-of-the-box" to be precise) software. I bought a replacement display for my Mini Pro and it would just freeze on CM10.1 but worked (kinda) on stock ICS.
And yeah, it's and old phone, but a good one. Development for it and it's 2011 brothers has clearly slowed down but has absolutely not stopped
Click to expand...
Click to collapse
Hello. Thank you for replying. Its a second hand phone .. my brother purchased it from a friend then gave it to me. So it may have a replaced display or digitizer. I just checked with my brother and he said his friend never repaired the phone.
So GB and ICS use different digitizer drivers? Is it possible to use GB touch drivers with ICS?
No idea. Your problem is truly rare haha.
I'm out of ideas here, most of the time flashing a stock ftf does the trick, but not here.
if I were you, i'd sell that phone to someone who woulndn't care about software updates hehe.
Hello Friends.
I am posting this in case someone else face the same problem and find this thread. In my opinion ..this is a very rare and strange problem.
This problem should never happen with an original handset.
If your touch only works with Gingerbread stock roms and even after complete wipe other stock roms freeze your touch .. then you can be sure that your touch was replaced with a cheap one. Go to a servicing center and replace it with a good touch or sell the phone to someone else who doesn't care about updates.
I went to a servicing center today and replaced my touch. Now it works smoothly with stock ICS rom. I am sure it will work with CM too. It costed me around 25$.
1 tip to recognize low quality touch. Low quality touch will not have transparent bottom-left and bottom-right button. You wont be able to see the key lights through it. Good quality touch will have transparent button. Another warning .. after market touch is most probably not scratch resistant like the original touch .. so you may want to use a good screen protector (plastic film) on it.
This is not only for WT19i. Whenever you buy a secondhand set .. make sure its touch wasn't replaced and best to check if its upgraded and working properly.
Thanks to "Pixelado" for hinting me about the replaced touch issue. Then it made sense to me .. there was no other logical reason for the stock rom not working.
I am very happy with my upgraded ICS But kinda sad about the money loss ! Anyway loss is loss. This is a good handset and I hope it will serve me good. Now looking for a way to root it.
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Pixelado said:
i'm always more than glad to help
Now, on the rooting issue, I strongly recommend unlocking your bootloader and flashing a pre-rooted kernel. Why, you ask? Well, you'll find out eventually
Custom kernels often pack a bunch of optimizations and the ability to overclock. I strongly recommend Rage kernel for stock ICS. Once you flash it, i'll take care of rooting your phone on first boot. If you're not able to unlock your bootloader/don't feel comfortable flashing kernels, rooting by exploits is your only choice.
By the way, I strongly suggest giving LegacyXperia CM10.1 a try. Its awesome
Click to expand...
Click to collapse
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
I've never tried mesa, so no comment there. Quie frankly, rage 3.2 seemed to be all i ever needed when using a stock rom. I tried lupus, but stopped using it when they switched from CWM to TWRP.
Angelina7 said:
Thanks a lot Pixelado. I have unlocked bootloader and using mesa kernel 4.8. Would Rage 3.2 would be better than Mesa?
I'll try LegacyXperia CM10.1 .. appreciate the recommendation.
Click to expand...
Click to collapse
i have same problem too
can u solve this problem?
Hi I wanted to ask you about a heating problem with my galaxy s3 .
I flashed the boeffla kernel in the archi port rom with android 4.4.2 , and I overclocked it to 1.6 ghz ,
I've done that with cyanogenmod 11 and have not encoutered any problems but needed to change to a touchwiz rom since cyanogenmod doesn't have hdmi capability
Everything worked fine for a month but after that my phone feels slightly warm when browsing/watching videos and feels hot playing intensive games like asphalt 8
I put the frequency to 1.4 ( the default one ) but it did not stop so I reflashed the archiport rom ( thought the stock kernel would fix it ) but it didn't
I even restored a backup of my phone in cyanogenmod 11 but it did not stop
I want to ask you for help since you are very good at this, and I have an extra question : Do you think flashing the stock android 4.3 firmware with odin will help ?
I am sorry if I posted in a bad section this is my first thread here .
Thegalaxys3guy said:
Hi I wanted to ask you about a heating problem with my galaxy s3 .
I flashed the boeffla kernel in the archi port rom with android 4.4.2 , and I overclocked it to 1.6 ghz ,
I've done that with cyanogenmod 11 and have not encoutered any problems but needed to change to a touchwiz rom since cyanogenmod doesn't have hdmi capability
Everything worked fine for a month but after that my phone feels slightly warm when browsing/watching videos and feels hot playing intensive games like asphalt 8
I put the frequency to 1.4 ( the default one ) but it did not stop so I reflashed the archiport rom ( thought the stock kernel would fix it ) but it didn't
I even restored a backup of my phone in cyanogenmod 11 but it did not stop
I want to ask you for help since you are very good at this, and I have an extra question : Do you think flashing the stock android 4.3 firmware with odin will help ?
I am sorry if I posted in a bad section this is my first thread here .
Click to expand...
Click to collapse
It s normal that phone overheats. But if it overheats too much that s not good. Try to reflash 4.3 with odin and see if the problem persists.
Sent from my GT-I9300 using XDA Free mobile app
Hi I have flashed the androis 4.3 and have noticed improvement
I dont have any heat using apps like chrome and xda free ( it got a little warm when I browsed with chrome with other roms ) and when I played angry birds go , it got a little warm when I turned the app and stayed like thst without a tempersture change
I included the screenshot of the time they used the cpu
I know I screwed up a little with overclocking but is my warmness when playing 3d games normal now
Sent from my GT-I9300 using XDA Free mobile app
Thats weird