Hey guys i tried to root my L9, but it had issues and got stuck and program force closed in the middle of the update now it wont do anything except boot loop.
I've tried to use KDZ to restore the software on it, but no dice.
- used SHHTP, the use KDZ to load the 10g file on it, but it says server is under maintenance
- tried to do it on a new computer that has nothing on it, and it says its already updated, i tried to use the recovery option wont allow me
what else can i do?
thanks
eric303 said:
Hey guys i tried to root my L9, but it had issues and got stuck and program force closed in the middle of the update now it wont do anything except boot loop.
I've tried to use KDZ to restore the software on it, but no dice.
- used SHHTP, the use KDZ to load the 10g file on it, but it says server is under maintenance
- tried to do it on a new computer that has nothing on it, and it says its already updated, i tried to use the recovery option wont allow me
what else can i do?
thanks
Click to expand...
Click to collapse
Same method-offline flash kdz and plz note to add required lines in hosts file. U do this so that u can avoid connecting to official website. Did u try hard reset? hold vol- home button and power button
got it thanks, had to reboot the computer about 6x not sure why. thanks
OP, you seem to be getting assistance in this thread>>>>HERE, but yet you started a new thread. Please keep your posting within one thread, instead of opening new threads. Thank You.
Related
So I rooted my sister's optimus v about a month ago. Today she installed a battery mod app from applanet and as soon as she chose which battery mod she wanted she had to restart her phone for the changes to be applied, but when rebooting the phone it would only get stuck in reboot. So I tried to start it up in recovery and got the blue screen that says fastboot mode started. I looked that up online and found a fix to it but I need it to go into emergency mode to fix it that way and it will not go into emergency mode, any combination of keys only takes it to either the blue screen with the fastboot mode message or it just reboots and gets stuck. So now what do I do? I really need to find a way to fix her phone. Thanks in advance to anyone who tries to help.
try to turn on the phone & use LGMobile update tool. That should recognise the phone & install original lg fw
tabs648 said:
So I rooted my sister's optimus v about a month ago. Today she installed a battery mod app from applanet and as soon as she chose which battery mod she wanted she had to restart her phone for the changes to be applied, but when rebooting the phone it would only get stuck in reboot. So I tried to start it up in recovery and got the blue screen that says fastboot mode started. I looked that up online and found a fix to it but I need it to go into emergency mode to fix it that way and it will not go into emergency mode, any combination of keys only takes it to either the blue screen with the fastboot mode message or it just reboots and gets stuck. So now what do I do? I really need to find a way to fix her phone. Thanks in advance to anyone who tries to help.
Click to expand...
Click to collapse
give a try to error guides over here http://forum.xda-developers.com/showthread.php?t=883314 it has done wonders for many flash in cs emergency mode from the flasher menu. Read detail guide in the link provided.
I am not sure if it works for optimus v but it does works for optimus 1. give it at try
I managed to finally get the phone into emergency mode. I had installed the LG mobile support tool and installed all the drivers and tried to go that route but it kept telling me I only had one of four drivers installed, even though I have installed several drivers. After all of that I had finally got it into emergency mode so I went back to trying KDZ. I'm supposed to select the rom where it asks for the KDZ file right? But when I go to browse for the rom file it doesn't show up in the folder I put it in. I've rooted 4 phones and have done so many other things with them and never bricked one, was always able to figure out everything I did and never had to ask any questions but I can't figure this out to save my life and it is driving me crazy. I do really appreciate you guys for the suggestions and thanks to your suggestions I have gotten this far.
Hey, I have the same problem. I rooted my phone then I installed that battery mod app on applanet. I installed it then when I had to restart my phone for it to apply it just got stuck and kept looping the reboot screen where it says "ANDROID". Did you get ur fixed yet?
tabs648 said:
I managed to finally get the phone into emergency mode. I had installed the LG mobile support tool and installed all the drivers and tried to go that route but it kept telling me I only had one of four drivers installed, even though I have installed several drivers. After all of that I had finally got it into emergency mode so I went back to trying KDZ. I'm supposed to select the rom where it asks for the KDZ file right? But when I go to browse for the rom file it doesn't show up in the folder I put it in. I've rooted 4 phones and have done so many other things with them and never bricked one, was always able to figure out everything I did and never had to ask any questions but I can't figure this out to save my life and it is driving me crazy. I do really appreciate you guys for the suggestions and thanks to your suggestions I have gotten this far.
Click to expand...
Click to collapse
I'm having the same issue right now, although at least you have managed to get it into emergency mode. How did you do it?
The other issue I'm seeing is that there is no .kdz for the Optimus V LGVM670. I found a .cab file that is supposed to be the newest update, but not even sure that will work with the the kdz manager.
It was my sister's phone and I had the same problem with kdz. Had the cab file so couldn't use it with kdz. My sister left her phone with me for a few days to try to fix it and when I couldn't she took it home and managed to fully brick it to where it would do nothing at all so she had to get a new phone. I got it into emergency mode by holding down the volume and it was either the back button or the home button I pushed at the same time, can't remember which. As I held those down I plugged in the USB cord that was connected to my laptop and it went right into emergency mode. Just make sure you disable that LG modem in the device manager on the computer before doing anything because my sister forgot to do that and that is how she fully bricked her phone. Good luck to you guys and if anyone figures out how to fix it I would be interested in knowing how you did it.
tabs648 said:
It was my sister's phone and I had the same problem with kdz. Had the cab file so couldn't use it with kdz. My sister left her phone with me for a few days to try to fix it and when I couldn't she took it home and managed to fully brick it to where it would do nothing at all so she had to get a new phone. I got it into emergency mode by holding down the volume and it was either the back button or the home button I pushed at the same time, can't remember which. As I held those down I plugged in the USB cord that was connected to my laptop and it went right into emergency mode. Just make sure you disable that LG modem in the device manager on the computer before doing anything because my sister forgot to do that and that is how she fully bricked her phone. Good luck to you guys and if anyone figures out how to fix it I would be interested in knowing how you did it.
Click to expand...
Click to collapse
hmmmmm, I don't remember completely how I did it, but there was a very helpful guide floating around XDA. I bricked my Mom's Optimus one as well . I actually had to go to the LG support site, type in my Phone serial number and find a list of all the firmware available. From there I right clicked the page and got the page source. From there I got my firmware and I entered it in the KAZ or LG B2I Agent ? - Dont quite remember. Anyways, it ended up working out for me, but I accidentally flashed the German firmware, but in the end, everything was all good LOOL.
Hi,
I rooted my LG Vortex (no recovery installed yet), and deleted bloatwares such as Verizon Navigations and other apps. It was running great for the last two months until I reset my phone. After resetting the phone, I can no longer log in to my phone. After the phone is turned on, it tell me to choose the language and activate the phone. Then, LG Setup screen showed up and when I click next, it says unexpected error occurs and went back to choose language screen. I think I might have deleted something that is required to setup LG welcome screen. Is there anyway I can do to get the phone working? Any advice would be appreciated.
if you really did delete something essential, i think you should start back from scratch. find the kdz file for the lg vortex and flash it using kdz updater (of course, research this stuff first because while kdz updater is used to flash your phone, it can also brick your phone if you're not careful)
btw, heres how to get your kdz file:
http://forum.xda-developers.com/showthread.php?t=865479
edit: actually, this is an easier way to get your kdz file:
http://forum.xda-developers.com/showthread.php?t=1073827
and heres a guide:
http://forum.xda-developers.com/showthread.php?t=875881
Thanks sweetnsour. Unfortunately, I cannot find stock ROM for Vortex there. One more potential problem is that since can't log into settings, I cannot turn on USB debugging mode. I do not know if USB debugging mode has to be enabled to perform KDZ flash.
This is the error message that I received at the welcome screen.
"The application com.android.LGSetupWizard(process com.android.LGSetupWizard) has stopped unexpectedly. Please try again."
i know this reset might be similar to what you did, but i want to try all possibilities of saving your phone before we go into the hard stuff:
turn off your phone, hold the home+vol down+power. it should boot into the stock recovery and do a reset (i believe, at least this is what happened to me)
and if that doesnt work, check your pm.
heres a better guide (i shouldve posted this earlier, sorry), this should clarify some things
http://forum.xda-developers.com/showthread.php?t=883314
Hi everyone! As stated in the title my phone(p769) wont boot completely, I was in the middle of doing the bootloader unlock when I accidecntly replaced the bin during the root process of it with the wrong bin. Instead of replacing it with the v6 tmobile usa one I used the v5 canadian one. Now when I boot my phone up the lg screen is there and then eventually it just hits an android with a red exclamation point. I've tried Re-flashing while its in s/w upgrade mode with the flasher set to emergency, and Ive tried pressing the home button + vol down + power to no avail(it goes through the process but the same thing happens)
Any help at all would be greatly appreciated and many thanks in advance!
Edit: Also when I try to reflash, it just says it cant communicate with my phone. Ive uninstalled and reinstalled the drivers several times but seeing as how I cant acutally get into the phone Im not sure what else to do.
Edit 2: So ive been trying do something witht his for the past three hours and I cant get anywhere with it. I cant get the phone to show up as an adb device while its in s/w upgrade mode, and at the red exclamation point screenit shows up but as recovery and the lg tools fail to communicate with it. I would really appreciate if anyone knew how to deal with this.
Just in case anyone stumbles upon this and has the same issue I would like to say that i finally got mine fixed.
It has been a long day of frustrations but I finally got it there with the help of some awesome tutorials.
In order to fix it I had to fastboot my phone and flash the default loader and boot then my device would show up in my adb devices and I could sucessfully flash and root it.
hufger said:
Just in case anyone stumbles upon this and has the same issue I would like to say that i finally got mine fixed.
It has been a long day of frustrations but I finally got it there with the help of some awesome tutorials.
In order to fix it I had to fastboot my phone and flash the default loader and boot then my device would show up in my adb devices and I could sucessfully flash and root it.
Click to expand...
Click to collapse
how you resolve it?
saman_z1384 said:
how you resolve it?
Click to expand...
Click to collapse
I followed the fastboot tutorial and searched around in the help forum for people with similar issues and found a post where lelus posted both of the files I needed to flash with fastboot, from there I just put my phone in s/w upgrade mode and followed Lelus guide for root/flash
I recently rooted my Lg G stylo (Metro). I was messing around with the Clockwork Mod Recovery. Long story short, I had to reboot into recovery but I keep getting a "Secure Booting Error" "Error code 1003". It keeps restarting over and over again and the same message keeps popping up. The screen doesn't pass the logo, it just shuts down after the error message shows up. repeat
There is no way to access the homescreen or anything. I trying to factory reset by holding the VOLUME DOWN + POWER KEY. It works. I get a menu that says Perform a factory reset , [Yes/NO]. When i click yes, the reset begins but after a while it shuts down and continues to repeat the same message. "Secure booting Error". "Error Code 1003". I have also been able to acces download mode where the screen would say firmware update/Usb. But idk what to do after that. Im pretty sure its not bricked since it still turns on.
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
I have the same problem
mnunez12 said:
Did you unlock the bootloader before you rooted or did you use one-click rooting apps to root your phone?
Click to expand...
Click to collapse
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Did figure how to recover phone?
ProblemMaker said:
The way mine happend is I tried installing twrp image with flashify and I know I installed it under the wrong one I clicked in the option above recovery anyways now I'm stuck on that.... So please help my warranty is over don't want to get a new phone.
Click to expand...
Click to collapse
i have the same problem
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
FIXED
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
Thanks. I finally fixed it thanks to this!!!!!
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
T mobile kdz file ?
soccereclipse087 said:
how do I flash the kdz back to pure stock if I can't get past the error message? Please help, thank you!
Click to expand...
Click to collapse
Did you get a answer? Also where can I find the kdz file?
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
botbro86 said:
Hello, I just soft brick my MS631 this morning. I had the phone rooted perfectly fine withthe katana ROM. Then, I stupidly use the reboot recovery option that is baked into the ROM withough developer options enabled and OEM chec (I forgot). Now, I get the looping Secure Booting Error 1003. If, I do the factory reset step (hold power and vol down) I get to the factory reset options, but when I select YES, it'll go through the loop again. HELP please, as I A) cant afford another phone right now and B) don't want to go back using my Windows 640 LTE phone with MetroPCS.
Click to expand...
Click to collapse
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
I actually did GT steps right after this post. Im now back on Katana and learned from my mistakes lol
I accidentally used king root without developer mode enabled
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery. How do I fix this?!?!?!
---------- Post added at 11:01 AM ---------- Previous post was at 10:59 AM ----------
Micgizel said:
I also bricked my phone to the point of it being unusable. I am running on boost mobile and I am using android marshmallow 6.0. My phone said it was rooted after using the 1 Click root app and I went to start it and it now says 'security ERROR MODDED 1003'. I am stressed out at this point and I have reset it via developer menu about 3 times to no avail. I am familiar with rooting and roms but I'm not really used to using code. I'm stock everything and I am running on Boost mobile. If anyone can find a boost rom for me to use it may be possible to put my phone in download mode. I do have an sd card if it is needed to load a zip on. Please help me get my phone booted again! I believe a sprint KDZ may work but I can not find one for download anywhere. Thanks !
Click to expand...
Click to collapse
This may happened to me too. I am on the Boost version as well. I used the king root app to root the phone then I tried to install the adaway app. When the app told me to reboot the phone, I clicked okay but I hit the secure bootloop. I didn't even try to install a recovery.
What if you cant get the phone to do anything outside of the boot loop?
br0adband said:
As a new owner of an LG G Stylo MS631 (the Metro PCS model) I had the same issue just yesterday when working with GameTheory's Katana ROM and he pointed out that when the Secure Booting Error Code 1003 shows up it's because you have to go into the Developer Options (tap the build version 7 times under Settings - About phone - Software Info, back out two steps and then find the new setting just above About phone) and check the box next to "Enable OEM unlock" - this doesn't unlock the bootloader but it does allow you to use tools like TWRP without hassles or some of the reboot to recovery apps.
If you're getting the error and you can't get past it in any respect, you're going to need to flash the factory KDZ to get it truly useful again. That's what I ended up doing because there simply was no other way to get recovery or anything else working.
Flash the KDZ back to pure stock, go into the Developer Options and enable that option (Enable OEM unlock) and then go about rooting/flashing TWRP/etc.
Good luck...
Click to expand...
Click to collapse
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
sherryf said:
i have tried holding down the volume down button and the power button at the same time but it doesnt do anything.. it makes the error code disappear for a split second and then it just comes back, it doesnt go into a normal boot option.. it doesnt go into a recovery mode of any kind to download anything to it.. can you help?
Click to expand...
Click to collapse
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
br0adband said:
I wish I could offer some help but I haven't owned an LG Stylo since I made that post - I literally sold that one the following day. Hopefully someone else might be able to provide some assistance.
Good luck...
Click to expand...
Click to collapse
Thank you so much for responding to me even though you couldnt help. . i appreciate that..
is there a way to fix it
arbyn said:
I did a similar thing. Go to HERE and follow GameTheory's unbrick guide. If you have problems downloading the KDZ like I did, then try getting it HERE
Click to expand...
Click to collapse
Sorry for the bump on this thread. I followed the unbrick guide mentioned here, and all seems like a GO... except a lost service. Screen Lock says "No Service", but I am receiving text messages from contacts.
lg ls770 (boost)
Lg stylo ls770 boost
My stylo is showing the same error 1003 and on bootloop. Can someone help me figure out where to go to get the fIles to restore it back to stock.
PM or email me if you can help TIA
help
the issue im running into using the tutorial to flash the metro kdz is it says it got disconnected from the server. any ideas?
Hello guys and gals, so i just recieved my LG V10 H901 and tried to follow https://forum.xda-developers.com/tm...step-step-guide-rooting-lg-v10-using-t3382631 this guide, but eventually i ended up with a brick after trying to flash the .tot file.
I keep getting
Boot Verification Fail
- cause: MISHMATCH_SIG_LEN
The TWRP recovery i had is now gone, and i can't access Bootloader. I can enter Download though. I read a lot of things around the problem, but i always stuck on various software versions or phone versions i can't really understand. Is there any way to get the phone back working? Before i try any method i just want to be sure i wont mess even worse (if that is even possible).
I tried UnbrickMe thread, but it says only for soft version:h90120j I have soft version H90120c (i haven't performed the update to MM) so i don't wanna try without being sure its going to work.
I m leaving for vacations in couple of days and i don't have a phone :/ please give me your lights.
Also LGUP wont see the phone, the same for ADB.
OK I Fixed it!
I was able to get out of this maelstrom of bootloops and to finaly flash the default ROM (you can find it here https://forum.xda-developers.com/tmobile-lg-v10/general/stock-h90120j000712-kdz-t3436249 )
So what i did is to remove battery for 10 seconds
Put The battery in
Hold volume up button
Plugin the phone to my PC through USB
Then download mode will start
I opened LGUP and fortunately it was able to see my phone.
Then went to Upgrade and flashed the kdz file.
All went smoothly and the phone is back working.