hey guy,
i wanna build paranoid rom from source for lg l5 p610... i don t understand the right paths to github ( cyanogenmod ) maybe anyone can check the right paths and can help ...
it must be look like this example ( see on paraniod guide ) but i dont understand the e610 tree
<!-- Add i9300 device tree -->
<project name="CyanogenMod/android_device_samsung_i9300" path="device/samsung/i9300" remote="github" revision="jellybean" />
<!-- Add Samsung Kernel SMDK4412 -->
<project name="CyanogenMod/android_kernel_samsung_smdk4412" path="kernel/samsung/smdk4412" remote="github" revision="jellybean" />
<!-- Add samsung hardware source tree -->
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="jellybean" />
<!-- Add Samsung Proprietary Vendor Files -->
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="jellybean" />
This is the github for the LG-P700 CM Kerrnel : https://github.com/CyanogenMod/lge-kernel-p700
This one is for drivers : https://github.com/CyanogenMod/android_device_lge_msm7x27a-common
Vendor github should be this: https://github.com/CyanogenMod/android_device_lge_p700
what i must write now into the manifest.xml ? pls help :good:
it seems your not yet done on this Sir Flatzki??
Related
I ran into This guide a few days ago and decided to give it a try for fun. however, i am stuck at this step:
Now, Lets add the device specific trees:
Add your own device tree, kernel tree, hardware source tree, & vendor proprietaries tree in the manifest. (BEFORE the manifest closing tags)
For example, I'm using all corresponding trees for Samsung Galaxy S3 i9300 - International
Following is just an example, not what you should copy/paste. SEARCH & USE YOUR OWN DEVICE SPECIFIC TREES.
Code:
<!-- Add i9300 device tree -->
<project name="CyanogenMod/android_device_samsung_i9300" path="device/samsung/i9300" remote="github" revision="jellybean" />
<!-- Add Samsung Kernel SMDK4412 -->
<project name="CyanogenMod/android_kernel_samsung_smdk4412" path="kernel/samsung/smdk4412" remote="github" revision="jellybean" />
<!-- Add samsung hardware source tree -->
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="jellybean" />
<!-- Add Samsung Proprietary Vendor Files -->
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="jellybean" />
Click to expand...
Click to collapse
I found our device tree and Kernel (both from Mevrodel's github) but am having trouble finding the hardware source tree, & vendor proprietaries tree. Can anyone point me in the right direction? thanks
iurnait said:
I ran into This guide a few days ago and decided to give it a try for fun. however, i am stuck at this step:
I found our device tree and Kernel (both from Mevrodel's github) but am having trouble finding the hardware source tree, & vendor proprietaries tree. Can anyone point me in the right direction? thanks
Click to expand...
Click to collapse
Glad you asked! This is my entire local_manifest.xml. If you add it to the main manifest.xml, like that guide says, just copy the 3 long lines.
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="Mevordel/android_device_samsung_venturi" path="device/samsung/venturi" remote="github" revision="jellybean" />
<project name="Mevordel/android_kernel_samsung_venturi" path="kernel/samsung/venturi" remote="github" revision="jellybean" />
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="jellybean" />
</manifest>
To make the vendor/proprietaries tree, download the latest CM10 alpha, and after repo syncing, go to device/samsung/venturi and run ./extract-files.sh ~/Downloads/cm-whatever.zip (use the appropriate path). Or, if you have cm10 installed, just run ./extract-files.sh - make sure you do this before running lunch.
Just for reference: all of the XYZ should be venturi, and we are hdpi, not xhdpi. Try skipping the vendor props section. There is no vendor repository; it is created by the script
so should i use your vold or Cyanogenmods?
iurnait said:
so should i use your vold or Cyanogenmods?
Click to expand...
Click to collapse
Until I figure out how to submit a proper patch to the CM team, you have to use mine for internal storage to work. It's the same as theirs except one modification.
Thanks for all your help. I finally got everything set up and am building right now.
Sent from my YP-G70 using xda app-developers app
I need the MT15i's (hallon) specific device trees for building Paranoid Android Jelly Bean from source. Can anyone help me with that in this format?:
Now, Lets add the device specific trees:
Add your own device tree, kernel tree, hardware source tree, & vendor proprietaries tree in the manifest. (BEFORE the manifest closing tags)
For example, I'm using all corresponding trees for Samsung Galaxy S3 i9300 - International
Following is just an example, not what you should copy/paste. SEARCH & USE YOUR OWN DEVICE SPECIFIC TREES.
Code:
<!-- Add i9300 device tree -->
<project name="CyanogenMod/android_device_samsung_i9300" path="device/samsung/i9300" remote="github" revision="jellybean" />
<!-- Add Samsung Kernel SMDK4412 -->
<project name="CyanogenMod/android_kernel_samsung_smdk4412" path="kernel/samsung/smdk4412" remote="github" revision="jellybean" />
<!-- Add samsung hardware source tree -->
<project name="CyanogenMod/android_hardware_samsung" path="hardware/samsung" remote="github" revision="jellybean" />
<!-- Add Samsung Proprietary Vendor Files -->
<project name="TheMuppets/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="jellybean" />
Click to expand...
Click to collapse
https://github.com/CyanogenMod/android_device_semc_hallon
I think
Sent from my Xperia Neo using xda app-developers app
yes but i need the kernel and the proprietary~ files too.
Tapatalk 2-vel küldve az én MT15i-ről
I'm looking to get SlimBean running on the HTC Vivid, and I've already repo synced the Slim git, from here- https://github.com/SlimRoms/platform_manifest
How would I go about downloading the neccessary source for my device from working code on Github? Do I just need to repo init the platform manifest for the device that I'm looking to port it to? I've built straight CM10.1 from source by itself before but I haven't ever combined from an outside tree like this.. Any help is greatly appreciated.
Also, do I need to get multiple repos, like do I need to download SlimROM, AOSP, and specific device tree repos? What all do I need to make sure I have before I start compiling?
calikevin said:
I'm looking to get SlimBean running on the HTC Vivid, and I've already repo synced the Slim git, from here- https://github.com/SlimRoms/platform_manifest
How would I go about downloading the neccessary source for my device from working code on Github? Do I just need to repo init the platform manifest for the device that I'm looking to port it to? I've built straight CM10.1 from source by itself before but I haven't ever combined from an outside tree like this.. Any help is greatly appreciated.
Also, do I need to get multiple repos, like do I need to download SlimROM, AOSP, and specific device tree repos? What all do I need to make sure I have before I start compiling?
Click to expand...
Click to collapse
Here is a copy of my slim-manifest.xml: <?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="SlimRoms/device_samsung_hercules" path="device/samsung/hercules" remote="github" revision="jb4.2" />
<project name="SlimRoms/proprietary_vendor_samsung" path="vendor/samsung" remote="github" revision="jb4.2" />
<project name="SlimRoms/device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" revision="jb4.2" />
<project name="SlimRoms/device_samsung_msm8660-common" path="device/samsung/msm8660-common" remote="github" revision="jb4.2" />
<project name="CyanogenMod/android_device_samsung_celox-common" path="device/samsung/celox-common" remote="github" revision="cm-10.1" />
<project name="CyanogenMod/android_hardware_qcom_display-caf" path="hardware/qcom/display-caf" remote="github" revision="cm-10.1" />
<project name="CyanogenMod/android_hardware_qcom_audio-caf" path="hardware/qcom/audio-caf" remote="github" revision="cm-10.1" />
<project name="CyanogenMod/android_kernel_samsung_msm8660-common" path="kernel/samsung/msm8660-common" remote="github" revision="cm-10.1" />
<project name="SlimRoms/hardware_qcom_display-caf" path="hardware/qcom/display-caf" remote="github" revision="jb4.2" />
<project name="SlimRoms/hardware_qcom_audio-caf" path="hardware/qcom/audio-caf" remote="github" revision="jb4.2" />
<project name="carvsdriver/android_kernel_samsung_msm8660-common"
You can see the things I pulled from cm10.1 to get it to work on my phone, my phone is now suported by slim but just a few months ago. Ask some of the dev's building other roms in your phones thread what all you need to pull from cm10.1 to get all to work. Good luck, Slim is by far my fav!
onlychevys said:
"
You can see the things I pulled from cm10.1 to get it to work on my phone, my phone is now suported by slim but just a few months ago. Ask some of the dev's building other roms in your phones thread what all you need to pull from cm10.1 to get all to work. Good luck, Slim is by far my fav!
Click to expand...
Click to collapse
Thank you but I'm a little confused, the things you pulled from CM to make it work, are those identified by where it says "path" followed by what looks like may be a file from CM?
edit: nevermind, it looks way different on the PC than it did on my phone, I can see the CM parts clearly now.
And where might I find the slim manifest to edit for myself?
Sent from my Vivid 4G using Tapatalk 4 Beta
at there git hub:https://github.com/SlimRoms/platform_manifest
Hi, I have a Samsung Galaxy Tab 4 WiFi (SM-T530) (codename: matissewifi). I want to make an AOSP rom to get rid of Touchwiz. I installed ubuntu, i fetched cyanogenmod android project from github. I grabbed device tree, kernel tree, vendor, hardware or something from a developer's github who works on a rom for this tablet. I don't know what should I have for making a rom. I edited local_manifest.xml file. Here's it:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="sub77/android_device_samsung_matissewifi" path="device/samsung/matissewifi" remote="github" revision="master"/>
<project name="sub77/android_vendor_samsung_matissewifi" path="vendor/samsung/matissewifi" remote="github" revision="master"/>
<project name="sub77/android_kernel_samsung_matissewifi" path="kernel/samsung/matissewifi" remote="github" revision="master"/>
<project name="mukulsoni/android_device_samsung_msm8226-common" path="device/samsung/msm8226-common" remote="github" revision="master"/>
<project name="sub77/android_vendor_samsung_msm8226-common" path="vendor/samsung/msm8226-common" remote="github" revision="master"/>
<project name="sub77/android_hardware_qcom_msm8226" path="hardware/qcom/msm8226" remote="github" revision="master"/>
<project name="sub77/android_device_samsung_qcom-common" path="device/samsung/qcom-common" remote="github" revision="master"/>
<project name="sub77/android_kernel_samsung_ms013g" path="kernel/samsung/ms013g" remote="github" revision="master"/>
</manifest>
But when I build the ROM, it says "Trying dependencies-only mode on a non-existing device tree?" and other some depressing errors or warnings. The biggest questions in my mind are:
1) How to properly edit local_manifest.xml file? What should it contain? Device tree, kernel or something? But I have multiple device trees in my this file (qcom-common, msm8226-common, matissewifi...)
2) What does "Trying dependencies-only mode on a non-existing device tree?" error want to tell? What does it mean? It is error or can i ignore it.
Please help thanks.
need help
i need help
Hi,
I'm trying to build CyanogenMod 14.1 following this guide (wiki.cyanogenmod.org/w/Build_for_oneplus2) and I've got stuck.
Specifically I've got stuck when executing "breakfast oneplus2".
This is the output of the command:
Code:
including vendor/cm/vendorsetup.sh
Looking for dependencies
Can't find toolchain for unknown architecture: /home/ghmap/android/cm "$v" userdebug
"$v" userdebug
I've installed the android development packages. So I think that I should have the required toolchain... But I don't really know which toolchaing it's talking about.
I haven't setup my local_manifests and I think that this could be the problem. I've no idea about how-to setup it for cyanogenmod 14.1. Any idea?
Currently it's looking like this:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_oneplus_oneplus2" path="device/oneplus/oneplus2" remote="github" />
<project name="CyanogenMod/android_device_oppo_common" path="device/oppo/common" remote="github" />
<project name="CyanogenMod/android_kernel_oneplus_msm8994" path="kernel/oneplus/msm8994" remote="github" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
</manifest>
Thanks
Idk if this will fix but idk if cyanogenmod repo is updated for 14.1 for the oneplus 2 try changing the vendor device kernel ect to seraph08's or someone else doing 14.1 builds it may fix it but may save you a problem down the line too
I changed my manifest to use Seraph08 repos and I get the same result.
This is how it looks like right now my local manifest:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="Seraph08/android_device_oneplus_oneplus2" path="device/oneplus/oneplus2" remote="github" />
<project name="Seraph08/android_device_oppo_common" path="device/oppo/common" remote="github" />
<project name="Seraph08/android_kernel_oneplus_msm8994" path="kernel/oneplus/msm8994" remote="github" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
<project name="TheMuppets/proprietary_vendor_oneplus" path="vendor/oneplus" remote="github" />
<project name="TheMuppets/proprietary_vendor_qcom_binaries" path="vendor/qcom/binaries" remote="github" />
</manifest>
And the result of "breakfast oneplus2":
Code:
including vendor/cm/vendorsetup.sh
Looking for dependencies
Can't find toolchain for unknown architecture: /home/ghmap/android/cm "$v" userdebug
"$v" userdebug
It looks like I'm missing some config...
Quick question you did run
source build/envsetup.sh
While in the root directory of the code right?
Yes, I did. This is the output:
Code:
including device/generic/mini-emulator-arm64/vendorsetup.sh
including device/generic/mini-emulator-armv7-a-neon/vendorsetup.sh
including device/generic/mini-emulator-x86_64/vendorsetup.sh
including device/generic/mini-emulator-x86/vendorsetup.sh
including device/oneplus/oneplus2/vendorsetup.sh
including vendor/cm/vendorsetup.sh
ghmap said:
Hi,
I'm trying to build CyanogenMod 14.1 following this guide (wiki.cyanogenmod.org/w/Build_for_oneplus2) and I've got stuck.
Specifically I've got stuck when executing "breakfast oneplus2".
This is the output of the command:
including vendor/cm/vendorsetup.sh
Looking for dependencies
Code:
Can't find toolchain for unknown architecture: /home/ghmap/android/cm "$v" userdebug
"$v" userdebug
I've installed the android development packages. So I think that I should have the required toolchain... But I don't really know which toolchaing it's talking about.
I haven't setup my local_manifests and I think that this could be the problem. I've no idea about how-to setup it for cyanogenmod 14.1. Any idea?
Currently it's looking like this:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="CyanogenMod/android_device_oneplus_oneplus2" path="device/oneplus/oneplus2" remote="github" />
<project name="CyanogenMod/android_device_oppo_common" path="device/oppo/common" remote="github" />
<project name="CyanogenMod/android_kernel_oneplus_msm8994" path="kernel/oneplus/msm8994" remote="github" />
<project name="CyanogenMod/android_device_qcom_common" path="device/qcom/common" remote="github" />
</manifest>
Thanks
Click to expand...
Click to collapse
Maybe you have in your ~/.bashrc / ~/.zshrc a variable called 'ARCH' which is equal to "$v$" ?
casual_kikoo said:
[/HIDE]
Maybe you have in your ~/.bashrc / ~/.zshrc a variable called 'ARCH' which is equal to "$v$" ?
Click to expand...
Click to collapse
No, I haven't.
Finally I've found a workaround. Using Bash instead of Zsh...
Thanks to everybody for the help!
ghmap said:
No, I haven't.
Finally I've found a workaround. Using Bash instead of Zsh...
Thanks to everybody for the help!
Click to expand...
Click to collapse
Yes, zsh is known to cause problems for building. I'm also sure that in the usual guides bash is used, not zsh. I ran into similar problems while building with zsh and did it the same way you did.