Rooting Micromax A27 - Android Q&A, Help & Troubleshooting

This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk

Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature

rv6598 said:
Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature
Click to expand...
Click to collapse
install google drivers . no need to install spreadtrum .

pls send me driver link
driver link pls.... thnks
moborobo is not installing the driver

cant find the device in command prompt
Pls help me
i cant find the devices in the command prompt

rv6598 said:
Pls help me
i cant find the devices in the command prompt
Click to expand...
Click to collapse
try moborobo method .

not working
it is not working

Vibhav Jha said:
This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk
Click to expand...
Click to collapse
where i can find adb folder and where i have to extract???????????

rv6598 said:
Hey,, i cant install the spreadtrum driver it is showing does not contain 3rd party digital signature
Click to expand...
Click to collapse
i have driver link but due to i am a new to xda therefore xda not allowing me to post outsiders link so plz mail me if u want driver link
[email protected]

Micromax bolt a27
Vibhav Jha said:
This Guide is for those who cant root their devices by tools like SuperOne , UnlockRoot etc .Because Adb cant recognize their devices .
This is a manual method and i like it most . first thing you need is adb .
download su and superuser.apk . download and install moborobo . now extracy su and superuser to your adb folder .
now connect a27 with moborobo . it will install drivers . dont disconnect your device with moborobo .
While connected with moborobo open command prompt in your adb folder .
type
Code:
adb devices
if you find your device listed then type
Code:
adb remount
Code:
adb push su /system/bin/
Code:
adb push su /system/xbin/
Code:
adb shell chmod 4755 /system/bin/su
Code:
adb shell chmod 4755 /system/xbin/su
Code:
adb install superuser.apk
Click to expand...
Click to collapse
is it applicable to Micromax Bolt A27

Micromax A27 Big Problem.....Help..!!!
[email protected] said:
is it applicable to Micromax Bolt A27
Click to expand...
Click to collapse
hiiiii...
theres a big problem with me..with my micromax a27
i hv installed cwm and taken backup of stock rom.
but mistakenly formatted system,data,cache....and all things in mounts and storage.
and then i realised that for booting into cwm is through quick boot (from thats what i was booting to recovery, i dont know any other way to boot)...
so u know my problem.....
plz say any way through which i can directly boot into cwm recovery and get my phone back...through buttons.....
plz im in big trouble and i waiting for replies.....
plz do reply immediately.....
there has to be a way out there to recover back...
Through pc....cmon dev's
Plz reply with concern. .....its very important to me.....
Plz show all the instructions....

not working help us to root micromax a27
unlockroot ( with moborobo) not working

First.. Use a powerful cable for e.g. samsung galaxys or canvas hds usb cable.. Your phone will be recognized by adb too.. Once that happens unlockroots good to go
Sent from my XT1028 using XDA Free mobile app
---------- Post added at 05:55 AM ---------- Previous post was at 05:46 AM ----------
Im no dev but.. If u want to boot into recovery u first have to boot in fastboot mode "power + volume down" .. Then you have to download recovery.img of ur phone from google then .. Check if your phone is connected by typing "fastboot devices"
If it shows a random number your good to go.. Den put your downloaded recovery.img in your ad and fast boot folder.. N open fastboot by pressing shift and right click and open window here and type "fastboot flash boot recovery.img" and then normal remove battery and normal boot.. U will boot in recovery
Sent from my XT1028 using XDA Free mobile app

Related

[Q] adb ?????????????? no permissions in ubuntu

I'm in a recovery boot loop and need to be able to access adb from recovery. I'm running ubuntu and adb devices while in recovery shows ?????????????? no permissions. Can somebody please help me. I think it may be as simple as a rule change somewhere but thats just a guess. Thanks guys.
newellj79 said:
I'm in a recovery boot loop and need to be able to access adb from recovery. I'm running ubuntu and adb devices while in recovery shows ?????????????? no permissions. Can somebody please help me. I think it may be as simple as a rule change somewhere but thats just a guess. Thanks guys.
Click to expand...
Click to collapse
Try this:
sudo su
adb start-server (preceeded by adb kill-server if adb already running). NOTE: You may have to change the path to adb since you are using Superuser to start the server, it may not be in your .bashrc.
exit
Then, run adb devices and see what you get. Happened to me with the EVO 3D and the above worked for me. Starting the adb server with SU permissions works.
pinky059 said:
Try this:
sudo su
adb start-server (preceeded by adb kill-server if adb already running). NOTE: You may have to change the path to adb since you are using Superuser to start the server, it may not be in your .bashrc.
exit
Then, run adb devices and see what you get. Happened to me with the EVO 3D and the above worked for me. Starting the adb server with SU permissions works.
Click to expand...
Click to collapse
Thanks. That got it,
Sent from my T-Mobile myTouch 3G using XDA
The file to check would an udev rules file. See where ubuntu keeps it.
Sent from my i9250

Any way to install sde on 4.0.25?

Sent from my ARCHOS 80G9 using xda app-developers app
Afaik, no. We must wait archos to release now official. Or maybe you can downgrade by formatting device and flasing 4.0.7 update.
eyco said:
Sent from my ARCHOS 80G9 using xda app-developers app
Click to expand...
Click to collapse
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
On your tablet :
check on Settings-> Developer options -> USB debugging on !
connect USB cable ( PC to tablet )
On your PC :
> adb push 1 /data/local
> adb push 2 /data/local
> adb shell
$ chmod 0755 /data/local/*
$ ./data/local/1
$ exit
> adb reboot
> adb shell
$ ./data/local/2
$ exit
> adb reboot
> adb push zimage /data/local/tmp
> adb push initrd.cpio.lzma /data/local/tmp
> adb push abcbox /data/local/tmp
> adb shell chmod 755 /data/local/tmp/abcbox
> adb shell /data/local/tmp/abcbox kd_flasher -k /data/local/tmp/zimage -i /data/local/tmp/initrd.cpio.lzma
( now you have installed unofficially SDE ! )
Flash Root version or other Custom Rom :
> adb reboot
> adb shell rm /data/local.prop
> adb push archos.ext4(.update) /mnt/storage
Go to SDE -> ( check "Reboot" on power off menu , and after a while press & keep volume down until you see SDE menu !)
Go to Recovery System -> Developer Edition Menu -> Remove Android Kernel -> I Undestand -> OK -> Developer Edition Menu -> Flash Kernel & Initramfs -> copy here zImage and initramfs.cpio.lzo appropriate archos.ext4(.update) -> OK -> wait to boot !
Now you have Rot version installed !
Here you will find the necessary files : Enable_SDE.zip
surdu_petru said:
Hi !
I uninstalled SDE by mistake yesterday !
...so, you can enable (install) unofficially SDE following this path ( work 100% on firmware 4.0.25 ) :
Click to expand...
Click to collapse
I put your guide to my collection. With proper credits OFC. If you have something against it, please post here
Sent from my GT-I9100 using xda app-developers app
julle131 said:
I put your guide to my collection. With proper credits OFC. If you have something against it, please post here
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Ok !
Very well , thanks !
....not more ....
Thanks, will try it tomorow
Sent from my ARCHOS 80G9 using xda app-developers app
ok need some help here.. where in the pc to put all this input?
eyco said:
ok need some help here.. where in the pc to put all this input?
Click to expand...
Click to collapse
Hi !
... does not matter as long as adb it works ! if adb do not recognized your device , than you need to put all files ( without adb and *.dll ) in .../Android/android-sdk/platform-tools/
This requires that you already have installed SDK & drivers from Archos ( need for adb recognized your device ! ) in your PC !
( also you need cmd command for run all commands on tour PC - available for Windows PC ) <- you can find cmd in my archive Enable_SDE.zip !!! =>"Command Prompt.lnk"
Good luck ! :good:
surdu_petru said:
Hi !
... does not matter as long as adb it works ! if adb do not recognized your device , than you need to put all files ( without adb and *.dll ) in .../Android/android-sdk/platform-tools/
This requires that you already have installed SDK & drivers from Archos ( need for adb recognized your device ! ) in your PC !
( also you need cmd command for run all commands on tour PC - available for Windows PC ) <- you can find cmd in my archive Enable_SDE.zip !!! =>"Command Prompt.lnk"
Good luck ! :good:
Click to expand...
Click to collapse
hi
i guess the adb didnt recognized the device.... :/
eyco said:
hi
i guess the adb didnt recognized the device.... :/
Click to expand...
Click to collapse
Ok!
Than, install SDK and drivers for your tablet from Archos ! :good:
i give up lol... i installed the sdk but have no idea what to do...
there is no software like on iOs that do it automatic?
eyco said:
i give up lol... i installed the sdk but have no idea what to do...
there is no software like on iOs that do it automatic?
Click to expand...
Click to collapse
Ok!
Put all the files from archive in /android-sdk/platform-tools/ ( without adb and all.dll)
& run cmd!
( also you need to install driver for your device from Archos- to recognized adb)
Good luck !
surdu_petru said:
Ok!
Put all the files from archive in /android-sdk/platform-tools/ ( without adb and all.dll)
& run cmd!
( also you need to install driver for your device from Archos- to recognized adb)
Good luck !
Click to expand...
Click to collapse
thanks i installed the drivers from archos, and will try to do like you said.
SdE installation.
eyco said:
thanks i installed the drivers from archos, and will try to do like you said.
Click to expand...
Click to collapse
I try to follow your explanation. I thinks I arrive to install asdk & driver, I click on command prompt.
I have this ... androis-sdk\platform-tools>
I put the first line adb push 1 /data/local, I have this message "error: more than one device and emulator "
You known that ?
Thanks by advance for your explanation
please give me an answer ?
---------- Post added at 06:40 PM ---------- Previous post was at 06:23 PM ----------
Can you help me?
I try to follow your explanation. I thinks I arrive to install asdk & driver, I click on command prompt.
I have this ... androis-sdk\platform-tools>
I put the first line adb push 1 /data/local, I have this message "error: more than one device and emulator "
You known that ?
Thanks by advance for your explanation
surdu_petru said:
Ok!
Put all the files from archive in /android-sdk/platform-tools/ ( without adb and all.dll)
& run cmd!
( also you need to install driver for your device from Archos- to recognized adb)
Good luck !
Click to expand...
Click to collapse
nico21311 said:
I try to follow your explanation. I thinks I arrive to install asdk & driver, I click on command prompt.
I have this ... androis-sdk\platform-tools>
I put the first line adb push 1 /data/local, I have this message "error: more than one device and emulator "
You known that ?
Thanks by advance for your explanation
Click to expand...
Click to collapse
Hi !
After installation SDE , you need to update your SDK , and also check driver !
Put all the files from archive without ( adb and all files .dll ) in directory /android-sdk/platform-tools/
Restart your PC , click on cmd and run all commands !
Good luck !
Thank you very much for your help.
You make a very good job .I hope to continue to support us
surdu_petru said:
Hi !
After installation SDE , you need to update your SDK , and also check driver !
Put all the files from archive without ( adb and all files .dll ) in directory /android-sdk/platform-tools/
Restart your PC , click on cmd and run all commands !
Good luck !
Click to expand...
Click to collapse
finely did it... thanks! and if i want to return to the original, i just flash the oem rom?

[Q] Toshiba Excite AT300SE-Root

Is there any way to root Toshiba excite at300se ?.Or Stock ROM link .I try to find the adb driver and CWM for the this tablet.:crying:
Don't worry bro.....
We will find the solution (one day)
did anyone find a way to root the AT300SE (Excite 10SE), or the AT305, they are the same as far as I know
the AT305 is the US edition.
Check this below link for ABD driver from Toshiba
hxxp://support.toshiba.com/support/viewContentDetail?contentId=4001725
Hope there will some more development for this device..
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
*edit*
Attention please: only for 4.1 JB (not 4.0.3 ICS)
tasos66 said:
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
Click to expand...
Click to collapse
Thank man for the update..
Did u try CWM or TWRP For recovery .To make stock backup
are you sure that it worked???
Doesn't seem to work on the Excite 10LE aka At200 :crying:
ftomas said:
are you sure that it worked???
Doesn't seem to work on the Excite 10LE aka At200 :crying:
Click to expand...
Click to collapse
For at300se it worked perfectly.
What exactly is the problem?
Did the pc recognized the device, as an adb connection?
tasos66 said:
For at300se it worked perfectly.
What exactly is the problem?
Did the pc recognized the device, as an adb connection?
Click to expand...
Click to collapse
I don't have the at200 here....
i didn't get any errors from the script, if i didn't have the correct drivers should have been an error on the script, no?
the script runs... and then i ask for enter to reboot.... the at200 reboots but no working SU
ftomas said:
I don't have the at200 here....
i didn't get any errors from the script, if i didn't have the correct drivers should have been an error on the script, no?
the script runs... and then i ask for enter to reboot.... the at200 reboots but no working SU
Click to expand...
Click to collapse
Sorry to hear that
there are several Motochopper versions out there, how many Mb is the zip file that you downloaded?
I downloaded four or five of them, maybe one of them will work for you.
tasos66 said:
Sorry to hear that
there are several Motochopper versions out there, how many Mb is the zip file that you downloaded?
I downloaded four or five of them, maybe one of them will work for you.
Click to expand...
Click to collapse
+/- 2mb
where can i find those files?
ftomas said:
+/- 2mb
where can i find those files?
Click to expand...
Click to collapse
I will send you the file I used and worked for at300se, later today (about 22:00 Greek time)
---------- Post added at 03:01 PM ---------- Previous post was at 02:13 PM ----------
ftomas said:
+/- 2mb
where can i find those files?
Click to expand...
Click to collapse
O.K. I found the link.
http://mirror21.downloadandroidrom.com/download/GalaxyS4/root/motochopper.zip?token=
Good Luck!
tasos66 said:
Finally rooted !!!
Hopelessly I tried the Motochopper and it WORKED !!!
My AT300SE is rooted.
You need:
a PC,
the motochopper http://forum.xda-developers.com/showthread.php?t=2228613
and
ADB driver http://support.toshiba.com/support/viewContentDetail?contentId=4001725
Click to expand...
Click to collapse
Did not work for me either. I own an AT300SE-101
Click for details here.
http://forum.xda-developers.com/showthread.php?p=42700267#post42700267
Worked fine.No problem for rooting device (at300se).......:good: After the root superSu got update and as well as binary.
Is any update on Recovery and stock ROM....
dashu42332 said:
Worked fine.No problem for rooting device (at300se).......:good: After the root superSu got update and as well as binary.
Is any update on Recovery and stock ROM....
Click to expand...
Click to collapse
I dont know whats the problem.... but dont work
ftomas said:
I dont know whats the problem.... but dont work
Click to expand...
Click to collapse
Disable antivirus software and firewall.
tasos66 said:
Disable antivirus software and firewall.
Click to expand...
Click to collapse
Hummm, did you see the photo i post?
ADB seems to be working... or not? the push command seem to be successful... its fails when installing superuser.apk?
Other thing... this is part of the the run.bat with some notes in front, because i don't know linux can you see if the notes are right?:
adb push pwn /data/local/tmp/ - send the pwn (exploit) to the tablet
adb shell chmod 755 /data/local/tmp/pwn - change pwn permissions
echo [*] Pushing root tools...
adb push su /data/local/tmp/ - send SU to the tablet
adb push busybox /data/local/tmp/ send busybox to the tablet
adb install Superuser.apk - install superuser on the tablet (where scrip seem to give the error)
echo [*] Rooting phone...
adb shell /data/local/tmp/pwn - WHATS THIS COMMAND DOES?
echo [*] Cleaning up...
adb shell rm /data/local/tmp/pwn - delete pwn
adb shell rm /data/local/tmp/su - delete SU
adb shell rm /data/local/tmp/busybox - delete busybox
echo [*] Exploit complete
ftomas said:
Hummm, did you see the photo i post?
ADB seems to be working... or not? the push command seem to be successful... its fails when installing superuser.apk?
Other thing... this is part of the the run.bat with some notes in front, because i don't know linux can you see if the notes are right?:
adb push pwn /data/local/tmp/ - send the pwn (exploit) to the tablet
adb shell chmod 755 /data/local/tmp/pwn - change pwn permissions
echo [*] Pushing root tools...
adb push su /data/local/tmp/ - send SU to the tablet
adb push busybox /data/local/tmp/ send busybox to the tablet
adb install Superuser.apk - install superuser on the tablet (where scrip seem to give the error)
echo [*] Rooting phone...
adb shell /data/local/tmp/pwn - WHATS THIS COMMAND DOES?
echo [*] Cleaning up...
adb shell rm /data/local/tmp/pwn - delete pwn
adb shell rm /data/local/tmp/su - delete SU
adb shell rm /data/local/tmp/busybox - delete busybox
echo [*] Exploit complete
Click to expand...
Click to collapse
It looks like the adb driver works fine but I am afraid your tablet can not be rooted by this method .
I am IT engineer and manager but not Android developer so I cannot help you any furthermore.
Maybe this is a good reason for a tablet upgrade
Good luck!
regards
Tasos
Please check your Android version in your tab. Because above steps will work only for Android version 4.1 or above. ....
dashu42332 said:
Please check your Android version in your tab. Because above steps will work only for Android version 4.1 or above. ....
Click to expand...
Click to collapse
hum......
I only have ICS 4.0.3

[Q] How to roor NEC Terrain NE-201A1A

I have a NEC Terrain NE-201A1A, use android 4.0.4 stock rom, I don't know how to root it, who can help me? Thanks so much
There is not any root method
zolahn said:
I have a NEC Terrain NE-201A1A, use android 4.0.4 stock rom, I don't know how to root it, who can help me? Thanks so much
Click to expand...
Click to collapse
At least for now, there is not any permanent root method. Only a temp shell root. NEC Terrain is NAND/bootloader locked, S-on and does not have fastboot support.
You should have used search. More about this:
Rooting NEC Terrain
NEC Terrain: ADB/CDC Serial Driver, 3e Recovery Password, and Root
NEC Terrain Rooting and Flashing Guide
Root method discovered for NEC Terrain?
Unlocking of NEC Terrain SIM/Root
FFDA said:
At least for now, there is not any permanent root method. Only a temp shell root. NEC Terrain is NAND/bootloader locked, S-on and does not have fastboot support.
You should have used search. More about this:
Rooting NEC Terrain
NEC Terrain: ADB/CDC Serial Driver, 3e Recovery Password, and Root
NEC Terrain Rooting and Flashing Guide
Root method discovered for NEC Terrain?
Unlocking of NEC Terrain SIM/Root
Click to expand...
Click to collapse
I read all thread but I can't install this driver in my computer, I think this driver is not correct for my phone, do u have other driver for nec terrain?
I'm using linux
zolahn said:
I read all thread but I can't install this driver in my computer, I think this driver is not correct for my phone, do u have other driver for nec terrain?
Click to expand...
Click to collapse
I am assuming that you are using Windows so try this ADB Driver Installer.
Hi
FFDA said:
I am assuming that you are using Windows so try this ADB Driver Installer.
Click to expand...
Click to collapse
Can u guide me how to root it? (tmp root). thanks
I can try
zolahn said:
Can u guide me how to root it? (tmp root). thanks
Click to expand...
Click to collapse
I have never tried getting temp shell root from windows, but it should pretty simple. First of all you have to set up adb (if you don't have it yet try this) and then just do this:
In windows cmd, go to folder where your run_root_shell file is.
Push run_root_shell to /datal/local/tmp folder using command: adb push run_root_shell /data/local/tmp/
Set permissions to run_root_shell: adb shell chmod 777 /data/local/tmp/run_root_shell
Go to adb shell using command: adb shell
Lastly get root temp using command: /data/local/tmp/run_root_shell
Good luck
zolahn said:
I read all thread but I can't install this driver in my computer, I think this driver is not correct for my phone, do u have other driver for nec terrain?
Click to expand...
Click to collapse
Here's a list of root apps you can try:
Framaroot
Vroot
For PC(plug your device into your PC and start rooting):
Kingo android root
These are really simple applications that helps you root your device with just a click.
---------- Post added at 09:46 PM ---------- Previous post was at 09:43 PM ----------
Before I forgot to mention this, after you've root your device with Kongo android root, the action can be reversed(unroot). You can't unroot with framaroot(in my memory), with vroot you can simply unroot your device by uninstalling this app.
FFDA said:
I have never tried getting temp shell root from windows, but it should pretty simple. First of all you have to set up adb (if you don't have it yet try this) and then just do this:
In windows cmd, go to folder where your run_root_shell file is.
Push run_root_shell to /datal/local/tmp folder using command: adb push run_root_shell /data/local/tmp/
Set permissions to run_root_shell: adb shell chmod 777 /data/local/tmp/run_root_shell
Go to adb shell using command: adb shell
Lastly get root temp using command: /data/local/tmp/run_root_shell
Good luck
Click to expand...
Click to collapse
So if i use ubuntu, how can root it?
Let's try Linux!
zolahn said:
So if i use ubuntu, how can root it?
Click to expand...
Click to collapse
You understand that this temp shell root does not let you debloat the phone, resize partition, ect? It basically lets you read more partitions through adb shell (Command line. NO graphical interface)?
If you still what to gain temp root:
Open terminal. Press
Code:
CTRL+ALT+T
at the same time.
In terminal paste:
Code:
sudo apt-get install android-tools-adb
and enter password. If you get an error that there isn't such application or similar paste this command:
Code:
sudo add-apt-repository ppa:phablet-team/tools && sudo apt-get update
and then the first one again.
Add the rule to 99-android.rules file. Open the file with this command:
Code:
sudo gedit /etc/udev/rules.d/99-android.rules
and paste in the window that just opened this line (Don't forget to add YOUR account name where it saids so in this line)
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="0409", ATTR{idProduct}=="0358", MODE="0666", OWNER="[B]your Linux account name[/B]"
save and close the window.
At this point you may need to restart your PC for changes to take effect, so better do it. Also turn debugging mode in your NEC Terrain and connect it to you PC with USB cable.
Go to folder where your run_root_shell file is, right-click and choose "open in terminal".
Check if ADB is set up right. Type in terminal:
Code:
adb devices
Your should see text like this:
Code:
List of devices attached
ea1f2870 device
Tell me if you see this:
Code:
List of devices attached
???????????? no permissions
Push run_root_shell to /datal/local/tmp folder using command:
Code:
adb push run_root_shell /data/local/tmp/
Set permissions to run_root_shell:
Code:
adb shell chmod 777 /data/local/tmp/run_root_shell
Go to adb shell using command:
Code:
adb shell
Lastly get root temp using command:
Code:
/data/local/tmp/run_root_shell
If you see # instead of $ in terminal you have shell root privileges.
Lets continue discussion in one thread!
http://forum.xda-developers.com/showthread.php?p=59514154#post59514154
I created a GitHub repo to collect information, also on how to disable apps (since thats as good as it gets for now).

Stuck in settings

I was trying to install gapps and now when I reboot I am stuck and the Play Store language select screen. When I click next, it takes me to settings. I have no home or back button so I cant get anywhere other than the settings menu. I have tried a factory reset with no avail. I also tried a manual update, but I have disable OTA updates so it wont recognize the .bin file on my SD. If only I could get to ES File Explorer. Any tips on fixing this problem?
Code:
adb shell "su -c 'mount -o rw,remount /system'"
adb shell "su -c 'mv /system/priv-app/SetupWizard.apk /system/priv-app/SetupWizard.apk.old'"
adb shell "su -c 'mount -o ro,remount /system'"
ONYXis said:
Code:
adb shell "su -c 'mount -o rw,remount /system'"
adb shell "su -c 'mv /system/priv-app/SetupWizard.apk /system/priv-app/SetupWizard.apk.old'"
adb shell "su -c 'mount -o ro,remount /system'"
Click to expand...
Click to collapse
Care to elaborate? I am a complete noob and shouldn't have been trying this at all. I can't access anything on my Kindle other than settings. Do I run this in command prompt on windows?
Edit: I also wanted to add that I am not one of the guys who sits around waiting for an answer without researching the problem lol
You need install adb on your PC - http://forum.xda-developers.com/showthread.php?t=2317790
Install drivers for our tablet (no need to reboot fastboot just manual install drivers for your kindle at device manager) - http://forum.xda-developers.com/showpost.php?p=59268023&postcount=8
Open CMD (cd C:\Program Files (x86)\Minimal ADB and Fastboot>)and paste these commands. I assume you rooted if you can block ota.
ONYXis said:
You need install adb on your PC - http://forum.xda-developers.com/showthread.php?t=2317790
Install drivers for our tablet (no need to reboot fastboot just manual install drivers for your kindle at device manager) - http://forum.xda-developers.com/showpost.php?p=59268023&postcount=8
Open CMD (cd C:\Program Files (x86)\Minimal ADB and Fastboot>)and paste these commands. I assume you rooted if you can block ota.
Click to expand...
Click to collapse
Apparently I no longer have root since I reset to factory. I do have the adb drivers installed, but I get stuck when using the command prompt because I dont have su access. Anyway for me to root it with only access to settings? I am on 4.5.2
are you sure?
earlier I had root even after hard reset on 4.5.2
anyway you could try install kingroot but I do not sure
I think @Cl4ncy and @Davey126 may clarify this.
ONYXis said:
are you sure?
earlier I had root even after hard reset on 4.5.2
anyway you could try install kingroot but I do not sure
I think @Cl4ncy and @Davey126 may clarify this.
Click to expand...
Click to collapse
Yes, I no longer had root access. Thanks to all of your other help and suggestions, I have been able to successfully get my Fire HDX working again. With all of the info you gave I was able to research and piece together what I needed. I was able to install Kingroot through cmd and then use the commands you gave to get rid out of settings. Thanks alot!

Categories

Resources