Ok... sorry for my lame eglish...
I have a problem... My razr dont boot anymore.
What i did?
i installed BMM and instaled this ROM
http://forum.xda-developers.com/showthread.php?t=2188937
and then i tryed to uinstal all of this and make razr back to stock.
I tried enthernity metod and then flashing stock with RSD lite.
I think i have a kernel problem...
I can go to fastboot, recovery etc.
But if i click "normal boot" i can see motorola logo for a few sec. and then phone power off.
Can you help me?
Edit:
RSD lite is failing on 1 or on 6 step... "faild flashing process "cdt.bin_signed""
enthernity method flash system, but fail on kernel etc.
what I can do?
Edit:
i tried to flash SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml by etenrity
but i get:
Echo is off
flash kernel:
blabla ok
blabla ok
flashing system:
... okay
okay
okay
okay...
erasing cache
okay
echo is off
greets from... etc...
Please help!
Edit:
i cant give it on warranty, right?
Is there any option to flash custom recovery via fastboot, stock recovery?
larpowiec said:
Ok... sorry for my lame eglish...
I have a problem... My razr dont boot anymore.
What i did?
i installed BMM and instaled this ROM
http://forum.xda-developers.com/showthread.php?t=2188937
and then i tryed to uinstal all of this and make razr back to stock.
I tried enthernity metod and then flashing stock with RSD lite.
I think i have a kernel problem...
I can go to fastboot, recovery etc.
But if i click "normal boot" i can see motorola logo for a few sec. and then phone power off.
Can you help me?
Edit:
RSD lite is failing on 1 or on 6 step... "faild flashing process "cdt.bin_signed""
enthernity method flash system, but fail on kernel etc.
what I can do?
Edit:
i tried to flash SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml by etenrity
but i get:
Echo is off
flash kernel:
blabla ok
blabla ok
flashing system:
... okay
okay
okay
okay...
erasing cache
okay
echo is off
greets from... etc...
Please help!
Edit:
i cant give it on warranty, right?
Is there any option to flash custom recovery via fastboot, stock recovery?
Click to expand...
Click to collapse
sorry, you cant, if you installed this in the second system, you can fastboot ics . you cant go back to stock because if you installed this on the first system, the cdt.bin has been a new one. so you cant. this means you will have to stick with the vodafone EU
also, its mentioned in this link : forum.xda-developers.com/showthread.php?t=2188155
"After you've applyed the Update there's NO WAY BACK TO ICS. If you try it, you'll brick! Also we got no Fastboot Files for RSD, so handle your Stock Slot with care!"
http://forum.xda-developers.com/showthread.php?t=2188937 <--- there is nothing about going back to ICS.
I dont know what are realy talking about... but what i can do?
please... some instructions?
I flash it on second system but what i need to fastboot?
If I'am getting it right...
I cant go back to stock because some cdt.bin has been changed.
Is there ANY OPTION to resurrect my phone?
...and... Thank You for your help
AW: [Q] razr flashing back to stock problem
With the FW you mentioned in the OP you try to go back to GB
Download an ICS Fastboot.
Gesendet von meinem XT890 mit Tapatalk 2
---------- Post added at 10:22 AM ---------- Previous post was at 10:21 AM ----------
http://sbf.droid-developers.org/umt...SPDRICSRTGB_HWp2b_Service1FF_fastboot.xml.zip
Gesendet von meinem XT890 mit Tapatalk 2
flash it with RSD? alredy tried it... but i will try one more time
Lol...
It worked...
Thank you. I love you all
YOU ARE MY OWN PERSONAL ANGELS OF PHONE-TCH.
Revert back from Jelly Bean to Ics
Hello
I am on Vodafone Jelly Bean. My phone is retail EU.
I made a backup to my ICS system in BMM before flashing retail vodafone ICS and then the the update to jelly bean.
Can I restore back to ICS without brick from the BMM Menu?
Thank you
ilelal100 said:
Hello
I am on Vodafone Jelly Bean. My phone is retail EU.
I made a backup to my ICS system in BMM before flashing retail vodafone ICS and then the the update to jelly bean.
Can I restore back to ICS without brick from the BMM Menu?
Thank you
Click to expand...
Click to collapse
do you install the Jelly Bean OTA from vodafone ICS in the stock recovery?
Related
I just made a mistake and I cant boot my razr now I flashed euro 2.3.6 then OTA to 4.0.4. I supposed that OTA ROOT should be the last step. Now I cant boot , and I cant flash euro2.3.6now. Any solution for me?
hastysky said:
I just made a mistake and I cant boot my razr now I flashed euro 2.3.6 then OTA to 4.0.4. I supposed that OTA ROOT should be the last step. Now I cant boot , and I cant flash euro2.3.6now. Any solution for me?
Click to expand...
Click to collapse
do you have a mmcblk18 backup?
if you do then its fixable and can get back to normal booting
if you dont then you can fix it but have to boot with bp tools everytime.
Reply back and ill try walk you through it..
woops.. I dont have a mmcblk18 backup.. I'm trying to flash boot.img then flash the euro 2.3.6 then OTA ROOT OTA4.0.4. I saw a thread which says the ge4.0.4 can use this method to flash euro 4.0.4
Could you boot before you tried OTA root? If you could, try to get the 4.0.4 update file onto your SD card, then restore to 2.3.6 (it'll fail, don't worry), and boot into recovery and install 4.0.4 again.
try tson's advice before going down the road of erasing cid.
if you are on an EU device then you should be able to fix it.
yep ,be4 i how to restore to 2.3.6?.. just apply the 4.0.4 again?
[TSON] said:
Could you boot before you tried OTA root? If you could, try to get the 4.0.4 update file onto your SD card, then restore to 2.3.6 (it'll fail, don't worry), and boot into recovery and install 4.0.4 again.
Click to expand...
Click to collapse
I applied it again and it fails. then I reboot to recovery then apply it , it shows the same thing "installition aborted."
Go that way > #6
http://forum.xda-developers.com/showthread.php?p=26915046
Gesendet von meinem XT910 mit Tapatalk 2
hello
i'm using JB OTA update, everything its ok after i'll try to install custom rom in my stock slot (Safestrap)
my phone is blank screen after M logo ( i dont know what its mean)
i try to wipe factory reset, but it seem. nothing change
before i'm update with JB OTA, im' from Asia Retail
what should i do ?
reflash with official JB en.eu (On XDA Sticky) ? [may i get brick if i do that ?]
or using this unbrick tool ?
cause if i flash ICS it will brick my phone
i hope you understand my problem
sorry for my english
raito13 said:
hello
i'm using JB OTA update, everything its ok after i'll try to install custom rom in my stock slot (Safestrap)
my phone is blank screen after M logo ( i dont know what its mean)
i try to wipe factory reset, but it seem. nothing change
before i'm update with JB OTA, im' from Asia Retail
what should i do ?
reflash with official JB en.eu (On XDA Sticky) ? [may i get brick if i do that ?]
or using this unbrick tool ?
cause if i flash ICS it will brick my phone
i hope you understand my problem
sorry for my english
Click to expand...
Click to collapse
Well you are not supposed to touch your stock slot on safestrap for a reason,any way I think you have to rsdlite your way out of there,meaning to flash the firmware from your region,in order to flash an european firmware on your device you must erase your CID but you can't do it on safestrap you have to use BMM but since you can't acces your system to switch recoveries you can only flash the firmware from your region.
Sent from my XT910 using xda premium
AztekSoul said:
Well you are not supposed to touch your stock slot on safestrap for a reason,any way I think you have to rsdlite your way out of there,meaning to flash the firmware from your region,in order to flash an european firmware on your device you must erase your CID but you can't do it on safestrap you have to use BMM but since you can't acces your system to switch recoveries you can only flash the firmware from your region.
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
my region is not able to update to JB
my phone is retail asia
so i upgrade to JB via BLUR OTA in tutorial on XDA
now i try to flash to JB retail british
wish me luck
raito13 said:
my region is not able to update to JB
my phone is retail asia
so i upgrade to JB via BLUR OTA in tutorial on XDA
now i try to flash to JB retail british
wish me luck
Click to expand...
Click to collapse
Good luck! Hehehe
Sent from my XT910 using xda premium
You will need to boot in AP Fastboot mode, and use fastboot tool with this command: fastboot -w (it's mean to double wipe ur phone), then do a hard flash use fastboot tool with Australia 4.0.4 package, when flash done u will see ur phone boot again and stop at droid robot sign, now u need to press volume key up and down it will show the offical android recovery menu.
Now unplug ur sd card from ur phone and use anyway to put the Australia 4.1.2 ota package (Blur_Version_xxxx.zip) to ur sd card, then put it back to ur phone, now use the "install update from sd card" flash again, when flash done u will see ur razr back in life again. Whoa!
Sorry for my eng, I'm from Taiwan
-Moto Raze XT910 PowerCore Edition
mpro420 said:
You will need to boot in AP Fastboot mode, and use fastboot tool with this command: fastboot -w (it's mean to double wipe ur phone), then do a hard flash use fastboot tool with Australia 4.0.4 package, when flash done u will see ur phone boot again and stop at droid robot sign, now u need to press volume key up and down it will show the offical android recovery menu.
Now unplug ur sd card from ur phone and use anyway to put the Australia 4.1.2 ota package (Blur_Version_xxxx.zip) to ur sd card, then put it back to ur phone, now use the "install update from sd card" flash again, when flash done u will see ur razr back in life again. Whoa!
Sorry for my eng, I'm from Taiwan
-Moto Raze XT910 PowerCore Edition
Click to expand...
Click to collapse
if i flash to fastboot ICS 4.0.4 it will be bricked ?
cause in thread OTA update it not recomended to downgrade to ICS
sorry for my eng too
raito13 said:
if i flash to fastboot ICS 4.0.4 it will be bricked ?
cause in thread OTA update it not recomended to downgrade to ICS
sorry for my eng too
Click to expand...
Click to collapse
No, it will not brick ur phone, hardy flash to 4.0.4 its only mean to flash the android system files in to ur phone and prepared the next step "apply update from sd card"
-Moto Raze XT910 PowerCore Edition
mpro420 said:
No, it will not brick ur phone, hardy flash to 4.0.4 its only mean to flash the android system files in to ur phone and prepared the next step "apply update from sd card"
-Moto Raze XT910 PowerCore Edition
Click to expand...
Click to collapse
Woa, i just flash my phene with retail british jb
Everything fine now
Next i just want to root my phone
Sent from my XT910 using xda app-developers app
Hello
I need immediate help!
Here is what happened. i have motorola razr maxx xt910 MERetail with stock rom. i install BMM recovery manager and then installed CM 10.1 on second slot/system. then i found out SS recovery manager is better so when i was in second rom, i installed BMM apk, hit uninstall and then install SS apk -> install SS recovery. after reboot, nothing boots up!
i only see the motorola logo and then it goes blank.
i tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by Hashcode (http://goo.im/devs/Hashcode/umts_spyder/aosp) but both errors on package signature verification. what can i do?
omid8bimo said:
Hello
I need immediate help!
Here is what happened. i have motorola razr maxx xt910 MERetail with stock rom. i install BMM recovery manager and then installed CM 10.1 on second slot/system. then i found out SS recovery manager is better so when i was in second rom, i installed BMM apk, hit uninstall and then install SS apk -> install SS recovery. after reboot, nothing boots up!
i only see the motorola logo and then it goes blank.
i tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by Hashcode (http://goo.im/devs/Hashcode/umts_spyder/aosp) but both errors on package signature verification. what can i do?
Click to expand...
Click to collapse
You were on JB stock or ICS stock?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB fastboot firmwares,just flash any EU firmware with RSD Lite.
welder73 said:
You were on JB stock or ICS stock?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are the JB fastboot firmwares,just flash any EU firmware with RSD Lite.
Click to expand...
Click to collapse
by default, it had ICS stock (4.0.4).
any ROM will do or it must be ICS and must be MERetail? EU firmware will work as well?
omid8bimo said:
by default, it had ICS stock (4.0.4).
any ROM will do or it must be ICS and must be MERetail? EU firmware will work as well?
Click to expand...
Click to collapse
You were on ICS and with this you will upgrade to JB.Go to the last page of that thread,a guy with the same version as yours succesfully flashed EU version.
welder73 said:
You were on ICS and with this you will upgrade to JB.Go to the last page of that thread,a guy with the same version as yours succesfully flashed EU version.
Click to expand...
Click to collapse
thanks for the link; im reading it now.
so its possible to direcly flash JB to my device when i have no rom/boot/recovery at this moment?
also, one more related question; is it possible to toggle off the package/signature verification so i can install cm 10.1 from razr factory bootloader?
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
just for learning purpose, can someone tell me what are these for?
cdrom_signed
cdt.bin_signed
devtree_signed
ebr_signed
mbr_signed
recovery_signed
radio.img
system_signed
omid8bimo said:
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
Click to expand...
Click to collapse
Glad that everything is ok.
Sent from my Razr XT910
Fastboot cable
omid8bimo said:
hello
i need immediate help!
Here is what happened. I have motorola razr maxx xt910 meretail with stock rom. I install bmm recovery manager and then installed cm 10.1 on second slot/system. Then i found out ss recovery manager is better so when i was in second rom, i installed bmm apk, hit uninstall and then install ss apk -> install ss recovery. After reboot, nothing boots up!
I only see the motorola logo and then it goes blank.
I tried to flash (through default motorola recovery menu) cm 10.1 and also a stock jellybean rom created by hashcode (http://goo.im/devs/hashcode/umts_spyder/aosp) but both errors on package signature verification. What can i do?
Click to expand...
Click to collapse
use a fastboot cable, it is helpful
omid8bimo said:
Ok problem solved.
for those who might have this problem; I flashed JB Retail British (9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml.zip) via RSD Lite 6 on windows into my device and everything went smoothly.
Click to expand...
Click to collapse
I did the same last night, using RSD Lite 6.1.5 and it said FAILED. Also tried to flash boot, recovery and system img files via Fastboot, also failed. I can enter Fastboot and stock recovery and that's about it. Also tried to flash Nandroid backup via custom recovery but it said "signature verification problem, installation aborted".
I'm out if ideas what to do. If someone can help, please do.
Lincoln357 said:
I did the same last night, using RSD Lite 6.1.5 and it said FAILED. Also tried to flash boot, recovery and system img files via Fastboot, also failed. I can enter Fastboot and stock recovery and that's about it. Also tried to flash Nandroid backup via custom recovery but it said "signature verification problem, installation aborted".
I'm out if ideas what to do. If someone can help, please do.
Click to expand...
Click to collapse
I just did the RSD format and i worked. make sure you follow the steps on getting into the fastboot recovery menu and it should say "ready" until you can force flash via RSD and appropriate rom file.
omid8bimo said:
I just did the RSD format and i worked. make sure you follow the steps on getting into the fastboot recovery menu and it should say "ready" until you can force flash via RSD and appropriate rom file.
Click to expand...
Click to collapse
Please brother, can you post your process step-by-step and I will try your way, I have all the files needed but it just won't work. It is visible in Fastboot cause it shows the device's serial number, but in RSD Lite it says N/A under the device description. Also, fastboot says my CID is 5, don't know is it related to this issue. Flashing from stock recovery comes up with "signature verification failed", whatever I tried: ICS, JB, ICS backup, update...
Also, Fastboot menu says (first line) flash failure. This is my first Motorola phone and I really don't know what to do anymore, I'm pretty desperate. Is it possible that no one can help in this case? As for the HTC HD2 with Android ported, I shared my knowledge and experience which helped many users fix their issues. As for the Razr, I've been reading for days and nights since it was bricked and couldn't find the solution yet.
Sent from my HTC HD2 using Tapatalk 2
Lincoln357 said:
Please brother, can you post your process step-by-step and I will try your way, I have all the files needed but it just won't work. It is visible in Fastboot cause it shows the device's serial number, but in RSD Lite it says N/A under the device description. Also, fastboot says my CID is 5, don't know is it related to this issue. Flashing from stock recovery comes up with "signature verification failed", whatever I tried: ICS, JB, ICS backup, update...
Also, Fastboot menu says (first line) flash failure. This is my first Motorola phone and I really don't know what to do anymore, I'm pretty desperate. Is it possible that no one can help in this case? As for the HTC HD2 with Android ported, I shared my knowledge and experience which helped many users fix their issues. As for the Razr, I've been reading for days and nights since it was bricked and couldn't find the solution yet.
Sent from my HTC HD2 using Tapatalk 2
Click to expand...
Click to collapse
follow this dude -> http://www.droidviews.com/restore-your-motorola-droid-razr-from-bootloop-using-fastboot-files/
Its what i did to restore my bricked razr to a working state.
i am currently stuck on a screen saying
AP Fastboot Flash Mode (s) (Boot failure)
0A.6C
Device is LOCKED. Status Code : 0
Battery OK
OK to program
Connect USB
Data Cable
Invalid CG OTV(CG: webtop): Invalid SP data
Invalid CG version( CG: webtop)
Invalid CG OTV(CG: webtop)
my phone was working fine until today.
This is what i did --->
1)i was on slim bean 4.3 in bbm slot 1 and kernel was boot_3.0.8-gbacb1cf
2)i downloaded and installed gummy rom 2.1 and it did not work
3)i read in the comments section of gummy rom that gummy rom 4.4 v2.1 was working great with jbx kernel
4)i installed latest jbx kernel for 4.4( after intall i went into slimbean 4.3 and it was working fine)
5)i then again did a clean install for gummy rom ( i installed it in rom slot 2)
6)it booted and i then reinstalled all my apps using titanium backup
7)i did a soft reboot after installing xposed
8)i wanted to see how much time a full reboot would take for gummy rom so i restarted(not soft reboot)
and now i ended up with this PLEASE HELP ME!!!!!!!!!
this is my only phone:crying:
EDIT: Now i cant get past the Motorola Logo. I can get into fastboot but after motorola logo the screen is completely blank
Flash stock ICS or jellybean rom you will have a working device,.....
3n3rg1c said:
Flash stock ICS or jellybean rom you will have a working device,.....
Click to expand...
Click to collapse
How do i flash it??
i cant get past the ap fast boot boot failure screen
Just flash via Rsd lite. In fastboot mode..
3n3rg1c said:
Just flash via Rsd lite. In fastboot mode..
Click to expand...
Click to collapse
can i do it by this method --->ww.youtube.cm/watch?v=LA8og7sbtBY(put 'w' and 'o')
will i stll have root ? and will i be able to flash roms?
yashkhatanhar said:
can i do it by this method --->ww.youtube.cm/watch?v=LA8og7sbtBY(put 'w' and 'o')
will i stll have root ? and will i be able to flash roms?
Click to expand...
Click to collapse
in this method he says that you cant use 2.3(gingerbread) if you are on a ics razr. But i had a jb razr so which files do i use?
please if anyone knows a solution PLEASE HELP ME OUT AND GIVE ME HOW TO INSTRUCTIONS BECAUSE I AM A NOOB.
i heard that razr does not charge when it is bricked. my battery was >70% when it got bricked. i dont want its battery to drain off
Yes for sure If you were on Jellybean Then flash stock firmware & yes whats your device's region Asia,US,Latim etc...
3n3rg1c said:
Yes for sure If you were on Jellybean Then flash stock firmware & yes whats your device's region Asia,US,Latim etc...
Click to expand...
Click to collapse
i stay in india and i had updated my phone last december during christmas when JB was leaked. i am sure i was on JB. can you please give me a link to asia fastboot files???
kk one last question did you erased cid??
I am also an Indian and there is no official JB for Indian XT910 so you If you didnot mess ur cdt in your past then u can directly flash the ICS stock. and enjoy custom roms
3n3rg1c said:
kk one last question did you erased cid??
I am also an Indian and there is no official JB for Indian XT910 so you If you didnot mess ur cdt in your past then u can directly flash the ICS stock. and enjoy custom roms
Click to expand...
Click to collapse
i had erased the cid but i still have a backup of it on my pc. please tell me step by step instruction on how to fix my phone please.
U Hello xda,
I've decided to root my xt910 and install cm rom. Root went smoothly however i had problems with the custom recovery. At first i tried safestarps but i couldn't flash the zip it keep aborting the installation :
Set_perm some changes failed. I've tried to install cwm 5.0.8.0 from here http://forum.xda-developers.com/showthread.php?t=1751826 but i got status 7 trying to flash the rom after factory reset and wiping cache. Couldn't find in updater scripts the assert part that i need to delete to make status 7 disappear because of compatibility. I tried to wipe dalvik cache and formatting system which afterwards i manage to flash the rom. At the end i received message "if rom wasnt flashed on rom slot - 1 phone will not boot!!! This will be fixed soon. "
When i tried reboot system nothing boots. And when i try to boot to recovery i get to stock recovery although i had installed cwm.
Now i end of with a bricked phone. My questions are:
1. How can i unbrick?
2. I backed up nandroid with cwm but i cant acces cwm only stock recovery? Why is that and how can i get to cwm?
3. Why my phone is not booting? I did not flash with safestarps so it wasn't flashed on rom slot-1
4. I only have acces to stock rom, ive download a firmware update Jb 4.1.2 can i flash it with stock recovery to solved my brick?
Am i still rooted? Because i read i need to unroot before updating. How can i unroot if i only have stock recovery?
Please help!!! I can't afford lossing this phone!
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
torecdude said:
Anyone have an idea what can i do? Not sure if i should use rsd to flash fastboot files, im not 100% sure what my firmware version is
Click to expand...
Click to collapse
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
welder73 said:
Yes,you should use Rsd.
Where you from?
Here http://forum.xda-developers.com/showthread.php?t=2231289 are all JB fastboot files,pick one for your country.
Sent from my Razr XT910
Click to expand...
Click to collapse
thanks, rsd solved my problem.
torecdude said:
thanks, rsd solved my problem.
Click to expand...
Click to collapse
I'm glad that to hear that.
Sent from my Razr XT910