Hello, I'm wondering if there's any way to disable the carousel/wrap around feature of sense for the home screens in this rom. I really disliked it in stock Sense and was hoping there would be a way to turn it off with this rom.
none
PM Mikey, he will respond, but I doubt it.
I was a weekly ROM flasher with the original EVO 4G. Now I have just rooted my Evo 4G LTE and MeanBean was the first ROM I flashed. The only thing I dislike about the ROM is I am using the Sense clock and it says "current location" all the time. I want it to update to the actual current city. Is this normal or do I need to re-flash?
djthunderx said:
I was a weekly ROM flasher with the original EVO 4G. Now I have just rooted my Evo 4G LTE and MeanBean was the first ROM I flashed. The only thing I dislike about the ROM is I am using the Sense clock and it says "current location" all the time. I want it to update to the actual current city. Is this normal or do I need to re-flash?
Click to expand...
Click to collapse
You can't click it and update it?
Sent from my PoS MoPho
bigdaddy619 said:
You can't click it and update it?
Sent from my PoS MoPho
Click to expand...
Click to collapse
It will not update the location. The temp/weather/time is all good.....The city/location will not change and says "current location".
djthunderx said:
It will not update the location. The temp/weather/time is all good.....The city/location will not change and says "current location".
Click to expand...
Click to collapse
First I would try to delete the widget from the home screen and then re add it and see if it functions properly after that. If not I would try to reflash meanbean and see if that helps. Are you running the current firmware? Mine will even show the little town of 300 people that is up the road a little ways when I'm there so it should work. If you are way out in the boonies though you are out of luck.
djthunderx said:
I was a weekly ROM flasher with the original EVO 4G. Now I have just rooted my Evo 4G LTE and MeanBean was the first ROM I flashed. The only thing I dislike about the ROM is I am using the Sense clock and it says "current location" all the time. I want it to update to the actual current city. Is this normal or do I need to re-flash?
Click to expand...
Click to collapse
I've had that issue as well, you might want to check the settings (or the power control widget) to see if your location mode is activated since it is hidden from the top status bar in this rom. I turn it off to help save battery, and whenever it is deactivated, I have the same thing showing on my clock, once I reactivate location, it works again.
Related
I have an Evo 3D GSM the thing is I can't get the mobile internet to work, wifi and internet pass through is working. Tried different roms, different radios, apn settings, hence everything I could find worth trying, but no joy. My carrier says there is no problem from their end. I am pretty helpless now. So I request for some help here...
Currently my Evo x515m is running:
Android 2.3.4
Sense 3.5
InfectedROM Eternity
LeeDrOiD kernel
11.73.3504.00U_11.23.3504.09_M2 radio
Ping results from test menu:
IpAddr: Fail: Ip addr not reachable
Hostname(google.com): Fail: Host unreachable
Cliet test: Fail: IOException
Please someone help me out
No one?
Stay Calm Bro!!
When you said APN settings, did you mean you deleted the APNS which came with the rom and manually typed the settings of your network and maybe then rebooted to see if it worked??
kaleavi said:
When you said APN settings, did you mean you deleted the APNS which came with the rom and manually typed the settings of your network and maybe then rebooted to see if it worked??
Click to expand...
Click to collapse
Sorry for getting back late i wasn't getting any response so was kinda stressed. Yes I deleted the settings then manually created new ones with the help of my carrier but no luck. And yes rebooted ofcourse.... just said that in case you think you dealing with a dumb person
scorcher9 said:
Sorry for getting back late i wasn't getting any response so was kinda stressed. Yes I deleted the settings then manually created new ones with the help of my carrier but no luck. And yes rebooted ofcourse.... just said that in case you think you dealing with a dumb person
Click to expand...
Click to collapse
Longshot here...
Go to call and type *#*#4636#*#*
Phone info
Press menu, enable data connection.
Sent from my HTC EVO 3D X515m using Tapatalk 2
scariola said:
Longshot here...
Go to call and type *#*#4636#*#*
Phone info
Press menu, enable data connection.
Sent from my HTC EVO 3D X515m using Tapatalk 2
Click to expand...
Click to collapse
No joy...
Well, if you have tried everything then it might be its hardware
Sent from my HTC EVO 3D X515m using Tapatalk 2
Try going back to stock and calling your service provider and have them reset your signal.
#Root-Hack_Mod*Always\
kaleavi said:
Well, if you have tried everything then it might be its hardware
Sent from my HTC EVO 3D X515m using Tapatalk 2
Click to expand...
Click to collapse
The net is working fine with internet pass-through and wifi how come only mobile data not working because of some hardware? And also what hardware can it be? Any advice please?
laie1472 said:
Try going back to stock and calling your service provider and have them reset your signal.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
I called them and they said it can be my sim card bandwidth issue so I have to personally visit them which I did and they said all is good from their end. Maybe its related to the newer radio I flashed or the rom or something.
Try reflashing your prior radio.
#Root-Hack_Mod*Always\
laie1472 said:
Try reflashing your prior radio.
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
To be honest I don't remember which radio it had originally and have no backup(yes I know my bad) but I tried some GB based radios from this thread but no joy. For now I am back to 11.73.3504.00U_11.23.3504.09_M2
Try this
http://forum.xda-developers.com/showthread.php?t=1153371
#Root-Hack_Mod*Always\
So your portable hot spot works with your laptop using your connection, but the data on the phone itself doesn't work? So you can't use the web browser or anything?
laie1472 said:
Try this
http://forum.xda-developers.com/showthread.php?t=1153371
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
Those codes don't work on my EVO 3D GSM I mean nothing happens when I enter them
thakk said:
So your portable hot spot works with your laptop using your connection, but the data on the phone itself doesn't work? So you can't use the web browser or anything?
Click to expand...
Click to collapse
Don't use the hot spot and frankly I never tried but pretty much everything else is fine except mobile data
Have you tried the older espt apk??
#Root-Hack_Mod*Always\
laie1472 said:
Have you tried the older espt apk??
#Root-Hack_Mod*Always\
Click to expand...
Click to collapse
Can you point me where i can find some info on what ESPT is and what it does and what I can do to it? Google doesn't help me and suggests it as EPST, u did a typo or I am going wrong?
Nah your good it was me on a typo. My bad on that. Have you found the apk??
#Root-Hack_Mod*Always\
I did find a few apks but I am hesitant to push any of it into my evo because in all the cases I have gone through they use it to get higher data speeds specially on sprint network. One, I am not on sprint and two, I am not having any connectivity at all. Ain't concerned about the speed yet. Can you be kind enough to guide me as to where I can find more info about this?
Btw thanks for taking out time and helping me out.
I have the cdma apk but I'm not sure if I works the same on the gsm. All the apk does is allow you to enter the diagnostic mode on your phone. The codes I posted earlier are codes/numbers you need to input into your dialer in order to access the diagnostic menu. Some roms have the newer apk that doesn't allow for the code to gain access so some well quite a few rom developer's include the older apk to allow the user to access the diagnostic menu. Make a backup of your current epst apk and place it on your sd incase you would like to revert. Then you can try out the apk you have found. Or you can download a gsm rom who has the older apk and extract it from there. This was what I was going to do just to be on the safe side because as I said I'm not sure if it's a difference between the cdma apk and the gsm apk. Then you can either push them to /system or if you have root explorer to can just c&p the apk and change permissions then reboot. As long as you have made a copy of you current epst.apk you can always revert back. Also as long as you have a nandroid you just restore.
#Root-Hack_Mod*Always\
I see the option under Advanced when I dial ##3283# and enter my MSL code. But when I click on it, nothing happens. The setting doesn't open up for me to make the change. Running "STOCK WITH GOODIES 1.75" rom. Anyone else not able to access the setting and found a way to made change?
unknown_owner said:
I see the option under Advanced when I dial ##3283# and enter my MSL code. But when I click on it, nothing happens. The setting doesn't open up for me to make the change. Running "STOCK WITH GOODIES 1.75" rom. Anyone else not able to access the setting and found a way to made change?
Click to expand...
Click to collapse
Flex may have removed part of the epst which would cause that issue. You would have to ask in the rom thread.
Sent from my released from customs Evo Lte!
I was able to access it when I was running that rom. I was on the latest 1.75 btw. Also its ##3282# not ##3283#. Make sure your radios are up to date.
Sent from my HTC Evo LTE powered by Viper4G
mexiking713 said:
I was able to access it when I was running that rom. I was on the latest 1.75 btw. Also its ##3282# not ##3283#. Make sure your radios are up to date.
Sent from my HTC Evo LTE powered by Viper4G
Click to expand...
Click to collapse
Yeah sorry I meant ##3282#. The radio I believe is up to date, the latest on that was released like 2 months ago: 1.05.11.0606
I'll check with flex, but I searched the Rom thread and saw someone mention that they were able to change the setting, so I figured the Rom was good and didn't ask.
I'm currently S-OFF using NeoMAX 2.0, and I've been having a problem where my data shuts off when my screen is off. I know there is the Power Saver Settings app that allows me to toggle the settings. But no matter what I do, my phone seems to ignore the settings I set in that app.
I'm also only able to get 4G after enabling 4G and then rebooting. Then I have 4G until my data shuts off, then it reverts to 3G, and then I have to toggle 4G off then on again, and reboot to get it briefly back.
Also, my wifi doesn't automatically turn off, regardless of the settings in the Power Saver Settings app.
I'm wondering if I'm missing something, or using the Power Saver Settings incorrectly.
One thing I've noticed is that the Power Saver app isn't listed in Super User as an approved application. Not sure if it should be there or not.
Also, I'm not sure if this is related, or if it even matters, but when I flashed the ROM, I did a clean wipe. Several times. Also, whenever I freshly flashed the NeoMAX ROM, my dialer crashed whenever I used the numpad, and I had to flash the GB-firmware patch [from Scott's ROMs] to get the dialer and SDcard to work. (Does this mean my Kernel flash was not successful?)
Current Setup:
NeoMAX 2.0
Kernel 3.0.16-gd0049f1
Baseband: 1.22.10.0310r
Build Number: 3.14.605.12
Amon Ra recovery
Any suggestions as to what I can do to fix this?
Thanks for helping out.
dbighead77 said:
I'm currently S-OFF using NeoMAX 2.0, and I've been having a problem where my data shuts off when my screen is off. I know there is the Power Saver Settings app that allows me to toggle the settings. But no matter what I do, my phone seems to ignore the settings I set in that app.
I'm also only able to get 4G after enabling 4G and then rebooting. Then I have 4G until my data shuts off, then it reverts to 3G, and then I have to toggle 4G off then on again, and reboot to get it briefly back.
Also, my wifi doesn't automatically turn off, regardless of the settings in the Power Saver Settings app.
I'm wondering if I'm missing something, or using the Power Saver Settings incorrectly.
One thing I've noticed is that the Power Saver app isn't listed in Super User as an approved application. Not sure if it should be there or not.
Also, I'm not sure if this is related, or if it even matters, but when I flashed the ROM, I did a clean wipe. Several times. Also, whenever I freshly flashed the NeoMAX ROM, my dialer crashed whenever I used the numpad, and I had to flash the GB-firmware patch [from Scott's ROMs] to get the dialer and SDcard to work. (Does this mean my Kernel flash was not successful?)
Current Setup:
NeoMAX 2.0
Kernel 3.0.16-gd0049f1
Baseband: 1.22.10.0310r
Build Number: 3.14.605.12
Amon Ra recovery
Any suggestions as to what I can do to fix this?
Thanks for helping out.
Click to expand...
Click to collapse
If you run the latest RUU and then set up your phone again, you'll probably be ok. Before you do that though, you didn't say what your hboot is.
topgun1953 said:
If you run the latest RUU and then set up your phone again, you'll probably be ok. Before you do that though, you didn't say what your hboot is.
Click to expand...
Click to collapse
Sorry for not posting this in the OP.
My hboot says:
*** LOCKED ***
VIGOR PVT ENG S-OFF FL
HBOOT-2.11.2005
dbighead77 said:
Sorry for not posting this in the OP.
My hboot says:
*** LOCKED ***
VIGOR PVT ENG S-OFF FL
HBOOT-2.11.2005
Click to expand...
Click to collapse
I don't think you should be using the ENG Hboot with an ICS ROM. There is a thread in Development that will provide you with the correct firmware/Hboot/radios for ICS.
I am pretty sure that you flash the ROM of your choice and then flash the Hboot package as PH98IMG by rebooting into bootloader before running your ROM for the first time. You may have to flash your recovery of choice back after that.
If you still have radio issues, you can create a nandroid, and do a factory reset in stock recovery (may also need to be flashed) and then restore your nandroid.
Sent from my ADR6425LVW using Tapatalk 2
This definitely happens to me on my Sense 4 ROM as well.
I can't help but feel like, if you EVER select 'Power Saver', even if you un-select it later, the 'Always-On Mobile' stays off (even though you can't get to that as a feature on its own).
Fail.
pkopalek said:
This definitely happens to me on my Sense 4 ROM as well.
I can't help but feel like, if you EVER select 'Power Saver', even if you un-select it later, the 'Always-On Mobile' stays off (even though you can't get to that as a feature on its own).
Fail.
Click to expand...
Click to collapse
The "power saver" options ONLY take affect when the battery falls below a certain percentage..I've heard 14% or 20% . They have no effect on everyday operations.:good:
...i've never seen them kick in below 14% myself, though. :laugh::laugh::laugh:
WookieFan said:
I don't think you should be using the ENG Hboot with an ICS ROM. There is a thread in Development that will provide you with the correct firmware/Hboot/radios for ICS.
I am pretty sure that you flash the ROM of your choice and then flash the Hboot package as PH98IMG by rebooting into bootloader before running your ROM for the first time. You may have to flash your recovery of choice back after that.
Click to expand...
Click to collapse
Thanks WookieFan! That did the trick. I wiped clean, reflashed my rom, then before it booted, I flashed the combo ICS combo zip. Also, for future reference, I didn't have to reflash my recovery. It stayed intact when I flashed the firmware/hboot/radio zip.
dbighead77 said:
Thanks WookieFan! That did the trick. I wiped clean, reflashed my rom, then before it booted, I flashed the combo ICS combo zip. Also, for future reference, I didn't have to reflash my recovery. It stayed intact when I flashed the firmware/hboot/radio zip.
Click to expand...
Click to collapse
Always glad to help!
Sent from my ADR6425LVW using Tapatalk 2
topgun1953 said:
The "power saver" options ONLY take affect when the battery falls below a certain percentage..I've heard 14% or 20% . They have no effect on everyday operations.:good:
...i've never seen them kick in below 14% myself, though. :laugh::laugh::laugh:
Click to expand...
Click to collapse
That would make a lot of sense with what I see.
EXCEPT
It does look like WiFi automatically shuts off with the screen off (or after 15m) when I have Power Saver On, and when I have it Off, my WiFi always stays connected (as I have set in my WiFi settings). This is a repeatable experiment, on my Newt's XXX 3.1.x ROM...
Maybe different on different ROMs too? Hard to tell! I first thought THAT was why Data was going off when screen goes off (sometimes, -- behavior just like every other HTC I've had with 'Always On Mobile' set to Off). However, the Always-On Mobile behavior seems to be Off all the time, regardless whether I have Energy Saver on or off. Confusing!
My data shutS off late at night when screen is off.Starting maybe around 12? no matter what I do. If I screen on it fires right back up. Then come morning it works like normal around 5 Am ish. It's a off peak thing I think.
Sent from my ADR6425LVW using xda premium
I bought my Evo4G LTE about two weeks ago and immediately rooted it. I have S-off with lazy panda and am running CM10 JB rom. Throughout the first week everything was running just fine. I could send and receive picture messages and MMS using both 3G and wifi. However over the past few days this has all changed. Whenever a picture comes in, either on 3G or wifi, the word "downloading" appears greyed out but the message never comes in. I have turned off and back on then back off automatic downloads. I have rebooted the phone, reloaded an earlier nandroid and nothing works. This happened all the time on my OG Evo 4G and I just wrote it off to "being the way it is". But honestly that isn't good enough with a brand new phone. I tried researching this and came up with someone saying to connect to Sprint Zone, which I cannot do because it is a stock app only and let the program troubleshoot for me. I downloaded an apk of this but it will not work.
If anyone has any help with this it would be much appreciated.
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
vel7wil said:
Have you tried updating ur profile and prl? I do that anytime and everytime I flash a new rom.....just a thought
Click to expand...
Click to collapse
Profile and prl?
rersland613 said:
Profile and prl?
Click to expand...
Click to collapse
settings/system updates update both
bigdaddy619 said:
settings/system updates update both
Click to expand...
Click to collapse
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
rersland613 said:
I don't have a system updates tab on my settings drop down? Maybe I'm in the wrong spot?
Click to expand...
Click to collapse
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
bigdaddy619 said:
you are looking in quick settings there is a settings icon in the upper right of the screen in the pull down on the notifications side
Click to expand...
Click to collapse
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
rersland613 said:
I did that. It is divided into 6 main sections: wireless and networks, interface, device, personal, accounts, and system. But I can't find anything about system updates. Again I am running CM10 Jelly Bean.
Click to expand...
Click to collapse
it's been a while since i've been on CM try looking in system
You need a sense Rom to update profile and prl
PHP:
om4 said:
You need a sense Rom to update profile and prl
Click to expand...
Click to collapse
Which sense rom do you suggest? So I need to keep one for backup on my phone and switch back over to CM10 after I update? I've only been getting one bar of cell service lately. Is this all pointing to the same issue? Would the prl still be the problem even when on wifi?
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
om4 said:
Any sense Rom, since its just for updates grab on of the basic stock roms from android development section. All the custom roms are a lot larger due to the various mods and extra stuff
Click to expand...
Click to collapse
Went ahead and downloaded the stock rom with goodies. Went through settings and updated the prl and profile. Can anyone tell me what the correct prl should be or does it depend on your location? Btw thank you for helping me with this.
Mine is at 25006
I'm on the same prl then. I still don't know what's up. I always have 1 bar of signal and am very frequently on 1x instead of 3g. At the same time my wife will be on 3g with full bars on her iPhone. The part that gets me about not sending and receiving pictures is that I was on WiFi. Should it matter what profile and prl I'm on if I'm trying to receive data via WiFi?
Sent from my EVO using xda app-developers app
Well most ASOP roms have the issue of intermittent mms not downloading but with that said some sense roms don't allow mms over WIFI and some do. If you aren't connected to WIFI and you still can't download mms after profile and prl updates you can get your msl number and do a data reset and go through the process of reregistering your phone with sprints network and that should solve your issue.
Sent from my EVO using Tapatalk 2
I just switched from a rooted One XL that was running Scott's CleanRom 4.5DE to a new One X+ that I've unlocked and rooted.
One of the features I miss the most is the ability to force the phone into 3G for most of my use with the ability to turn on 4G when I am watching video or something that requires more data.
Is there an app that works well at switching back and forth easily? I did a search in the play store and there are a couple in there but they seemed to be geared for phones that are CDMA/LTE rather than H+/LTE.
Thanks!!!
moregadget said:
I just switched from a rooted One XL that was running Scott's CleanRom 4.5DE to a new One X+ that I've unlocked and rooted.
One of the features I miss the most is the ability to force the phone into 3G for most of my use with the ability to turn on 4G when I am watching video or something that requires more data.
Is there an app that works well at switching back and forth easily? I did a search in the play store and there are a couple in there but they seemed to be geared for phones that are CDMA/LTE rather than H+/LTE.
Thanks!!!
Click to expand...
Click to collapse
I'm using Widgetsoid...add a widget to the screen and choose the "4G" plugin. That will bring you to the radio menu where you can select GSM/WCDMA only instead of GSM/WCDMA/LTE.
I use Phone Info by [email protected]
but the setting has to be changed every time you reboot
mickliq said:
I'm using Widgetsoid...add a widget to the screen and choose the "4G" plugin. That will bring you to the radio menu where you can select GSM/WCDMA only instead of GSM/WCDMA/LTE.
Click to expand...
Click to collapse
I had tried this one but the radio doesn't change when you select it.
MG
moregadget said:
I had tried this one but the radio doesn't change when you select it.
MG
Click to expand...
Click to collapse
You may need to toggle the radio off/on after you change between 3G/4G to force it after you make a change.
mickliq said:
You may need to toggle the radio off/on after you change between 3G/4G to force it after you make a change.
Click to expand...
Click to collapse
Made the change, toggled radio off then radio back on to no avail.
Turned radio off, made the change, turned radio back on and same result.
Thanks for the help!!!
MG
moregadget said:
Made the change, toggled radio off then radio back on to no avail.
Turned radio off, made the change, turned radio back on and same result.
Thanks for the help!!!
MG
Click to expand...
Click to collapse
Are you choosing "GSM/WCDMA, CDMA, and EVDO (PRL)"?
mickliq said:
Are you choosing "GSM/WCDMA, CDMA, and EVDO (PRL)"?
Click to expand...
Click to collapse
I have chose that one as well as tried WCDMA Preferred, GSM Only, WCDMA only, GSM auto. Always defaults back to gsm/wcdma/lte auto.
Thx!
MG
^ Are you rooted/unlocked bootloader?
You just have to make a apn for 4g network then you just go into apn and select the 4g apn or the lte apn
As far as 3g I donno I can just change mine from lte o hspa hspda or lte but I'm sure there's a 3 g only apn I just don't know it
Sent from my HTC One X+ using XDA Premium HD app
Phone info apk
rashad1 said:
Phone info apk
Click to expand...
Click to collapse
I used to do this using the code *#*#4636#*#*
It is easier now.. thanks rashad1
Seems no matter which I pick it just resets to the standard option.
If I turn the radio off first I can set whatever I want, but, upon turning back one I still get 'LTE' even if it isn't the selected network type.
EDIT: I see I have the same problem as 'moregadget' in that no matter what I do it just seems to go back to its default settings. It must be some BS AT&T did to prevent us from opting out of the battery sucking LTE connection.
I am on an unlocked bootloader & rooted on the Elegancia 3.1.0 AT&T rom.
DornoDiosMio said:
Seems no matter which I pick it just resets to the standard option.
If I turn the radio off first I can set whatever I want, but, upon turning back one I still get 'LTE' even if it isn't the selected network type.
EDIT: I see I have the same problem as 'moregadget' in that no matter what I do it just seems to go back to its default settings. It must be some BS AT&T did to prevent us from opting out of the battery sucking LTE connection.
I am on an unlocked bootloader & rooted on the Elegancia 3.1.0 AT&T rom.
Click to expand...
Click to collapse
Yep identical problem...
I went back to my original One X for a couple weeks and put the X+ away. I'll come back to it but right now its not fully functional for me.
I have eternal faith in the XDA community and that with more time the genius' here who are much smarter than I will figure it all out...
MG
So I was loading the Team Venom ViperXL+ 1.2.0 ROM yesterday and had a moment where I felt like an idiot. As I was selecting the items on the ROM that I wanted to load I ran across the area where I select what 3G/4G icons I want and I suddenly realized something I haven't seen on the One X+ forum but was prevalent on the original One X.
When you have the AT&T 4G icons in use you can't manually select the network however when you load a ROM that allows you to use the typical H+/3G icons that I believe are on the international version you can.
MG