Hello,
My amaze 4g is currently running GB with the bullet proof custom rom i found here a couple years ago.
The boot loader is unlocked, and it is S-ON.
I wanted to try and update my phone to an ICS rom such as NRGZ28's energy Rom found here: http://forum.xda-developers.com/showthread.php?t=1362759.
First attempt, I factory reset the phone, cleared cache and cleared dalvik cache and flashed the rom. I chose the option to install it using the stock HTC kernel. The installation went smooth without errors until the final reboot to finalize the installation. The phone gets stuck in the white screen with the green htc logo on it. I recover using Clock Work Mod and everything is back to the old GB setting.
I assume it is because i have an outdated kernel so I go to NRGZ28's thread and download the stock kernel he has posted there. I flashed the kernel using Flash Image GUI apk. This is where the problem happens. After flashing the kernel, the phone is stuck on infinite loop at the above mentioned htc screen.
I flash the energy rom with the newly flashed stock kernel and the phone finally gets past the htc logo screen, but freezes shortly after during the blue animated splash screen and proceeds to repeat this. I can get into boot loader just fine, but am unable to get my phone working again even after a Clock work mod recovery.
please help!!
There is a special process you have to follow when going from GB to ICS, you can't just flash the latest kernel and expect it to work with ICS.
I would do a full wipe/factory reset, then follow the instructions here to upgrade to ICS stock, then you can install whatever ICS ROM you want:
http://forum.xda-developers.com/showpost.php?p=26865752&postcount=27
---------- Post added at 11:33 AM ---------- Previous post was at 11:27 AM ----------
Here is another, possibly more helpful link. It gives step by step instructions, make sure to follow the ones for S=On users (assuming you are S=On).
http://forum.xda-developers.com/showpost.php?p=25215207&postcount=2
I see. Thank you. I will try that right now. I will post an update soon.
o_jake said:
There is a special process you have to follow when going from GB to ICS, you can't just flash the latest kernel and expect it to work with ICS.
I would do a full wipe/factory reset, then follow the instructions here to upgrade to ICS stock, then you can install whatever ICS ROM you want:
http://forum.xda-developers.com/showpost.php?p=26865752&postcount=27
---------- Post added at 11:33 AM ---------- Previous post was at 11:27 AM ----------
Here is another, possibly more helpful link. It gives step by step instructions, make sure to follow the ones for S=On users (assuming you are S=On).
http://forum.xda-developers.com/showpost.php?p=25215207&postcount=2
Click to expand...
Click to collapse
Alright now I'm having a completely unrelated trouble trying to re-lock my bootloader. Yes, I am S-on. I've tried to factory reset but the phone still ends up looping on the htc logo screen. I type in "fastboot oem lock" on sdk but it just hangs at "waiting for device".
DougieJK said:
Alright now I'm having a completely unrelated trouble trying to re-lock my bootloader. Yes, I am S-on. I've tried to factory reset but the phone still ends up looping on the htc logo screen. I type in "fastboot oem lock" on sdk but it just hangs at "waiting for device".
Click to expand...
Click to collapse
Are you able to get into the bootloader, fastboot, or recovery? I'm unsure of which HTC screen you are talking about, if it is the one before trying to boot into Android then I would just ignore it for now. If you're having trouble relocking the bootloader, you might try this toolkit, which includes a tool to relock the bootloader: http://forum.xda-developers.com/showthread.php?t=1493905
All this stuff can probably be found in the HTC Amaze Bible, which you should probably familiarize yourself with before messing around and potentially bricking your phone. http://forum.xda-developers.com/showthread.php?t=1679486
o_jake said:
Are you able to get into the bootloader, fastboot, or recovery? I'm unsure of which HTC screen you are talking about, if it is the one before trying to boot into Android then I would just ignore it for now. If you're having trouble relocking the bootloader, you might try this toolkit, which includes a tool to relock the bootloader: http://forum.xda-developers.com/showthread.php?t=1493905
All this stuff can probably be found in the HTC Amaze Bible, which you should probably familiarize yourself with before messing around and potentially bricking your phone. http://forum.xda-developers.com/showthread.php?t=1679486
Click to expand...
Click to collapse
Yes, it is the screen right before it boots onto your phone's lock screen or main screen. Yes, I can get into the bootloader, fastboot, and the recovery without any problems.
DougieJK said:
Yes, it is the screen right before it boots onto your phone's lock screen or main screen. Yes, I can get into the bootloader, fastboot, and the recovery without any problems.
Click to expand...
Click to collapse
If you can get into the bootloader, fastboot, and recovery, then you should be able to continue the steps and get it working again. Try the Toolkit method of relocking bootloader and continue upgrade to ICS.
o_jake said:
If you can get into the bootloader, fastboot, and recovery, then you should be able to continue the steps and get it working again. Try the Toolkit method of relocking bootloader and continue upgrade to ICS.
Click to expand...
Click to collapse
The all-in-one toolkit is not recognizing my device. Not sure if it's a problem with windows or the toolkit.
Also, it seems the toolkit only works if you are able to actually get to your phone's home screen, which I am unable to do.
So frustrating.....
DougieJK said:
The all-in-one toolkit is not recognizing my device. Not sure if it's a problem with windows or the toolkit.
Also, it seems the toolkit only works if you are able to actually get to your phone's home screen, which I am unable to do.
So frustrating.....
Click to expand...
Click to collapse
Here are some more instructions: http://forum.xda-developers.com/showthread.php?t=1575550&highlight=relock+bootloader
It seems as though the problem is with ADB communicating with your phone. Type in "ADB devices" to see if it is detecting your phone.
Also make sure the file "fastboot.exe" is in the same folder as your ADB file that your command prompt is using.
---------- Post added at 03:12 PM ---------- Previous post was at 03:03 PM ----------
Also are you in bootloader or fastboot when you are trying to do this? I believe you should be in fastboot.
To enter fastboot: Boot into bootloader (hold power and volume down button), scroll down to fastboot, hit the power button.
Now try executing the fastboot command using adb. (remember to make sure fastboot.exe is in same folder as adb)
Alright, so I got it relocked by hooking it up to an old tower. It seems it was an issue with windows not recognizing my phone for some reason.
NOW, there's a new problem. On the bootloader menu, on the top it says "RELOCKED". I choose the recovery option, and it immediately takes me back to the bootloader menu displaying a "Security Warning" message under "RELOCKED".
I am going to cry.:crying:
DougieJK said:
Alright, so I got it relocked by hooking it up to an old tower. It seems it was an issue with windows not recognizing my phone for some reason.
NOW, there's a new problem. On the bootloader menu, on the top it says "RELOCKED". I choose the recovery option, and it immediately takes me back to the bootloader menu displaying a "Security Warning" message under "RELOCKED".
I am going to cry.:crying:
Click to expand...
Click to collapse
This is good... I think. You can now move on to the next step in these instructions: http://forum.xda-developers.com/showthread.php?t=1575550&highlight=relock+bootloader
You have to rename the RUU to what is says in that link, place it on an external SD card, then reboot into bootloader. Then it should automatically install the update (there might be a prompt, just hit yes).
o_jake said:
This is good... I think. You can now move on to the next step in these instructions: http://forum.xda-developers.com/showthread.php?t=1575550&highlight=relock+bootloader
You have to rename the RUU to what is says in that link, place it on an external SD card, then reboot into bootloader. Then it should automatically install the update (there might be a prompt, just hit yes).
Click to expand...
Click to collapse
Yes!!! I finally got it to work! Oh my god thank you so much. Thanks for being so patient with me. I dont know what more i can do do express my gratitude. It just felt amazing to see everything working and falling into place after hours and hours of hopelessness.
So from here on, I assume I just get back onto the boot loader menu, Unlock the boot loader again, then flash the rom I want.
Thank you again.
DougieJK said:
Yes!!! I finally got it to work! Oh my god thank you so much. Thanks for being so patient with me. I dont know what more i can do do express my gratitude. It just felt amazing to see everything working and falling into place after hours and hours of hopelessness.
So from here on, I assume I just get back onto the boot loader menu, Unlock the boot loader again, then flash the rom I want.
Thank you again.
Click to expand...
Click to collapse
You can flash any *ICS* ROM you want. There's another process if you want to go back to GB (though I'm not sure why you would want to).
You should be able to use the Toolkit to unlock the bootloader again, and I would recommend flashing the 4ext recovery while you're at it. From there you should be good!
o_jake said:
You can flash any *ICS* ROM you want. There's another process if you want to go back to GB (though I'm not sure why you would want to).
You should be able to use the Toolkit to unlock the bootloader again, and I would recommend flashing the 4ext recovery while you're at it. From there you should be good!
Click to expand...
Click to collapse
is the 4ext recovery preferred over Clockwork?
DougieJK said:
Alright, so I got it relocked by hooking it up to an old tower. It seems it was an issue with windows not recognizing my phone for some reason.
NOW, there's a new problem. On the bootloader menu, on the top it says "RELOCKED". I choose the recovery option, and it immediately takes me back to the bootloader menu displaying a "Security Warning" message under "RELOCKED".
I am going to cry.:crying:
Click to expand...
Click to collapse
Thats fine now since you are locked you can download the ruu file pertaining to your phone/carrier and put it in the root of your external sd card and boot into the bootloader and it will automatically detect the ruu and start updating. however you must rename the ruu appropriately (depending on which carrier your phone is) for T-Mobile you rename the ruu file ph85img and it detects it automatically. Good luck
Sent from my HTC_Amaze_4G using xda app-developers app
DougieJK said:
is the 4ext recovery preferred over Clockwork?
Click to expand...
Click to collapse
Yeah. You might like it better too.
hatlesssandman said:
Thats fine now since you are locked you can download the ruu file pertaining to your phone/carrier and put it in the root of your external sd card and boot into the bootloader and it will automatically detect the ruu and start updating. however you must rename the ruu appropriately (depending on which carrier your phone is) for T-Mobile you rename the ruu file ph85img and it detects it automatically. Good luck
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Yep I was just overreacting. After I renamed the ruu file, everything fell into place and my phone is now functioning with ICS.
So apparently, my phone isn't rooted anymore? is this normal?
Flashed 4ext using the all-in-one tool kit. Nothing happened. Can't run any apps that require root. I'm confused.
Yeah, that's totally normal after flashing an RUU and relocking the bootloader. Just re-root, here's a really easy tool for it: http://theunlockr.com/2012/05/01/how-to-root-htc-amaze-4g/
o_jake said:
Yeah, that's totally normal after flashing an RUU and relocking the bootloader. Just re-root, here's a really easy tool for it: http://theunlockr.com/2012/05/01/how-to-root-htc-amaze-4g/
Click to expand...
Click to collapse
That tool doesn't work for some reason, even though its the tool I used when I first rooted my phone. I just went and did the fastboot flash unlock_code.bin to unlock my phone again.
But for some reason, I can't get 4ext to flash... I went through the steps in the link you provided but my phone doesn't show the app nor am i able to access it through the recovery option from the boot loader menu.
Related
Hi, did a stupid thing and did the OTA update without reading the forum. The first update went through but after the 2nd big update, my phone is stuck at the white HTC screen. My phone is HTCdev unlocked and was on stock GB. My hboot version is
Unlocked
Vigor PUT Ship S-On RL
Hboot 2.11.0000
eMMC-boot
Oct 6 2011
I've looked through the forums for a solution and so far I taken the following steps
1) I have tried to reflash through the hboot using rezound_AndroidPolice_3.14.605.12_PH98IMG.zip, but it won't reflash. It goes through the loading processing but at the end I don't get the do you want to update promt. It just brings me back to the fastboot, recovery, factory reset etc menu
2) Then tried reflash to stock GB (http://forum.xda-developers.com/showthread.php?t=1812084), that update worked I think since after the loading screen, it asked if I wanted to update and I clicked yes. But after that, still stuck at the white HTC screen
3) Did factory reset twice, once through hboot and then another time at the Recovery mode, still doesn't work
So now I'm completely lost in how to get my phone back to working state again. Any advice??
Thanks in advance.
Is your bootloader still unlocked? You can't take a stock rom with an unlocked bootloader. You have to relock it first.
If you can get to Fastboot, run "fastboot oem lock"
shrike1978 said:
Is your bootloader still unlocked? You can't take a stock rom with an unlocked bootloader. You have to relock it first.
If you can get to Fastboot, run "fastboot oem lock"
Click to expand...
Click to collapse
I've seen reference to "Fastboo" and running command prompt, but I have no idea how that process works. Can you explain or provide links in how to do this?
Thanks
merfolk17 said:
I've seen reference to "Fastboo" and running command prompt, but I have no idea how that process works. Can you explain or provide links in how to do this?
Thanks
Click to expand...
Click to collapse
Download fast boot files press right click select run command over here then follow the command mentioned above
Make sure u have the stock recovery before relocking ur boot loader
Sent from my HTC One X using xda app-developers app
hasibzaman said:
Download fast boot files press right click select run command over here then follow the command mentioned above
Make sure u have the stock recovery before relocking ur boot loader
Sent from my HTC One X using xda app-developers app
Click to expand...
Click to collapse
I have the Andriod SDK installed, so can you clarify what exactly do I right click and also how can I check if I do have the stock recovery flashed?
I've figured out how to use fastboot, but when I connect by phone to my computer and run the lock command, it says its waiting for the device to connect. Any suggestions?
it means your PC did not recognise the phone in fastboot. install htc drivers (through HTC sync), connect phone to PC, reboot to bootloader and select fastboot. you can see it changes to fastboot usb
I'm on the same boat, but my phone was completely stock when I took the OTA.
I used this link to unlock my phone. You can use it as reference to relock it
http://www.theandroidsoul.com/how-to-unlock-htc-one-x-bootloader/
Hope this can help you, Cheers.
Hi, My AT&T One X+ is stuck in a boot loop after trying to root. I think the problem is that I was using a method to root a non-AT&T One X+. I had the boot loader unlocked, and I have tried to factory reset but it goes into a boot loop. I am stuck, and I don't know what I can do.
FilyPhanatic said:
Hi, My AT&T One X+ is stuck in a boot loop after trying to root. I think the problem is that I was using a method to root a non-AT&T One X+. I had the boot loader unlocked, and I have tried to factory reset but it goes into a boot loop. I am stuck, and I don't know what I can do.
Click to expand...
Click to collapse
Using something for the international version on the AT&T version is definitely your problem. I do no understand why people can not read. You will be lucky if your device is not broken depending on waht tool you used. Now to try and fix, Go into the boot loader using power button and volume down. Go to fastboot and flash the STOCK AT&T RECOVERY. DO NOT USE AN INTERNATIONAL VERSION THEY ARE NOT FOR YOUR PHONE. Run the RUU with a locked boot loader. Alternatively You can flash AN AT&T RECOVERY and use the sideload option to try and place a AT&T ROM on the phone. Use recovery to install the zip.
WARNING: IF THIS DOES NOT WORK I AM NOT RESPONSIBLE FOR ANYTHING THAT DOES NOT WORK.
I think it's very hard to completely brick these phones with S-ON. You should try running the RUU and start all over again, using the all-in-one toolkit and follow the instructions here.
The similiar thing happened to me just the other day.
Heres what I did
Relock bootloader
Download stock AT&T RUU
Run RUU
You should have a stock phone now. That's what happened with mine anyway. This is my experience. I am not responsible for anything that happens to your phone.
Dfballa said:
The similiar thing happened to me just the other day.
Heres what I did
Relock bootloader
Download stock AT&T RUU
Run RUU
You should have a stock phone now. That's what happened with mine anyway. This is my experience. I am not responsible for anything that happens to your phone.
Click to expand...
Click to collapse
How did you do it? Where can I get the stock rom, and how do I flash it? I am new to android phones, I just switched from iPhone where everything is pretty much the same for every phone. I need as much help as possible. How do I relock the bootloader, and will AT&T be able to tell it was unlocked?
Search within hasoon2000's posts. He has the stock ruu posted somewhere.
I don't have htcs instructions in front of me but I'm pretty sure they explained how to lock the bootloader when you were following their instructions to lock it.
Sent from my HTC One X+ using xda premium
This is the RUU you need:
http://www.htcruu.com/?dir=EvitaRE
Not sure what the exact steps are to flash it as I've never done it but I think it would go something like:
Boot phone into bootloader and connect it via USB to your computer
Lock the bootloader, from your computer run: fastboot oem lock
Then from the computer execute the RUU .exe you downloaded above
If you downloaded the all-in-one toolkit, you could instead select "Relock Bootloader" and then "Do Command" and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1994961
http://forum.xda-developers.com/showpost.php?p=35897885&postcount=3
sirxdroid said:
This is the RUU you need:
http://www.htcruu.com/?dir=EvitaRE
Not sure what the exact steps are to flash it as I've never done it but I think it would go something like:
Boot phone into bootloader and connect it via USB to your computer
Lock the bootloader, from your computer run: fastboot oem lock
Then from the computer execute the RUU .exe you downloaded above
If you downloaded the all-in-one toolkit, you could instead select "Relock Bootloader" and then "Do Command" and follow the instructions.
http://forum.xda-developers.com/showthread.php?t=1994961
http://forum.xda-developers.com/showpost.php?p=35897885&postcount=3
Click to expand...
Click to collapse
Thanks for the link, I had a link to a bad download before. My only problem now is that the phone is not detected by the computer anymore. Is there anything I can do? Is there a certain mode that I need to be in for using the RUU?
I was able to get my computer to detect the phone and install the drivers. The RUU is currently running. I was wondering if anyone could help me to find the right method to root my phone.
FilyPhanatic said:
I was able to get my computer to detect the phone and install the drivers. The RUU is currently running. I was wondering if anyone could help me to find the right method to root my phone.
Click to expand...
Click to collapse
Carefully follow the instructions here, it has all you need:
http://forum.xda-developers.com/showthread.php?t=2066390
FilyPhanatic said:
How did you do it? Where can I get the stock rom, and how do I flash it? I am new to android phones, I just switched from iPhone where everything is pretty much the same for every phone. I need as much help as possible. How do I relock the bootloader, and will AT&T be able to tell it was unlocked?
Click to expand...
Click to collapse
Search around the forums for the stock ROM. Make sure you use the right model RUU. INTERNATIONAL AND ATT are not the same. Once you've located the RUU, use hasoons toolkit to relock your bootloader (there is an option for that). ATT will be able to tell if you've relocked because it says "relocked" at the top of the screen when you run hboot or fastboot.
The RUU will install the stock ROM once you launch the program from your PC. it will take about 5-10 minutes to do so. Once it completes your phone will reboot and it will be stock. Let me know if you need help flashing a custom recovery and ROM
Sent from my HTC One X+ using xda app-developers app
---------- Post added at 08:48 PM ---------- Previous post was at 08:45 PM ----------
FilyPhanatic said:
I was able to get my computer to detect the phone and install the drivers. The RUU is currently running. I was wondering if anyone could help me to find the right method to root my phone.
Click to expand...
Click to collapse
There are many ways to root.
1) install recovery using hasoons toolkit
2) install recovery using fastboot or adb.
There are other ways but #1 is what I recommend. Very easy to follow instructions
Sent from my HTC One X+ using xda app-developers app
Just go flash a custom rom. Everything will go back to normal then.
Check my post here...
http://forum.xda-developers.com/showthread.php?p=36013013#post36013013
Sent from my HTC One X+ using xda premium
I had already had my phone's bootloader unlocked and rooted and had a GPe ROM installed and worked perfectly. THEN I saw that you could literally make it a Google Play edition phone complete with OTA and worked on trying to achieve that. Getting my phone S-Off wasn't working because I believe of my HBOOT version (1.55) so I was told to download this stock ROM that would downgrade me to reach a version that I could then run revone to achieve S-OFF.
POST: http://forum.xda-developers.com/showpost.php?p=45487258&postcount=55
I ran a backup through TWRP first and then flahsed this ROM, which has kept my HTC One at the HTC One splash screen. I connected it to my computer/ADB and got it into the bootloader to go into custome recovery BUT the recovery takes me to a black screen with a phone and red triangle, so it's like my recovery isn't there anymore. Fine.
I download the latest TWRP for my phone(triple checked) and ran the fastboot flash recovery command through ADB but it says
"(bootloader) signature checking...FAILED (remote: signature verify fail)"
is there some sort of way to disable the signature check using ADB or am I actually going about this the wrong way?
I'll admit, I don't do this stuff oftem, so ask as many questions as needed as I probably left out details you may need
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
noobsquared said:
I may be wrong but you may have to re-lock the bootloader and run the ruu back to stock.
nandroid backup restore won't change the hboot so I don't think you'll have any luck there.
I'm running ARHD 40 just till we can find a way to run s-off on our AT&T devices.
Click to expand...
Click to collapse
Not to sound n00b-ish, but what would be the best way of doing this?
EDIT: Actually it is relocked already! Duh! On the bootloader screen it says "TAMPERED" and then "RELOCKED" below that
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I actually had that downloaded but I was just concerned if that was the right move since it wipes the phone.
noobsquared said:
That's alright, we were all noobs at some point in time.
Sounds like you re-locked the bootloader without stock recovery.
Here is the link:
http://forum.xda-developers.com/showthread.php?t=2158151
Download the cingular:
RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_Radio_4A.19.3263.13_10.38j.1157.04_release_334235_signed_2.exe 1134.6MB 2013-10-07 16:47:53
Run the RUU from a windows based computer that has HTC drivers and it should restore it back to stock.
Click to expand...
Click to collapse
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
h_smith said:
I hate to say this actually, but I can't find that .exe in the link. I don't know exactly what I'm looking for in it.
Click to expand...
Click to collapse
Here you go:
http://www.androidruu.com/getdownlo...13_10.38j.1157.04_release_334235_signed_2.exe
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
noobsquared said:
You can always unlock the bootloader again, install twrp and try to boot and see if that works.
Install the nandroid backup matching your system and you can then get to your data.
Click to expand...
Click to collapse
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
h_smith said:
But how would I do that if I can't even boot up the phone past the splash screen? I did all of the unlocking and TRWP installing via the phone
Downloading and installing the file right now. It's going slow as hell but I'll run when I get the chance
THANK YOU FOR STICKING WITH ME!
Click to expand...
Click to collapse
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
noobsquared said:
Sure thing man. It's stuck at that screen because when your phone is unlocked, it allows custom recovery but when it's locked, it won't boot unless it finds the stock recovery. I am not 100% sure but I've had that issue as well. I had to run the RUU to get back to stock since you can't lock the bootloader with custom recovery and expect it to boot. It may vary from device to device but I've always had to RUU back to stock or fastboot flash stock recovery to get past that screen before you lock the bootloader. You can try again, there is stock recovery posted by someone in forums. Download that, try to go in fastboot mode and try fastboot flash recovery recovery_name.img. I think once you've locked the bootloader it may not work but worth a shot.
Click to expand...
Click to collapse
Thank you. I'm downloading the .exe and will post the results. But it looks like that might take a few hours :/
hey is there another link? that one is so slow and keeps timing out :/
You can either use download manager or chrome browser is pretty good at managing that.
Try this: http://d-h.st/VWf
---------- Post added at 06:31 PM ---------- Previous post was at 06:30 PM ----------
I just did a google search for the term RUU_M7_UL_JB43_SENSE50_MR_Cingular_US_3.17.502.3_R and gave you the second result I got. Just search for the name of the file and you will find plenty of links.
Hope that helps.
This sounds like the exact same problem I had. The RUU and directions solved that one for me too...
Link to RUU: http://www.htc.com/us/support/news.aspx?p_id=628&p_name=htc-one-att
Other thread: http://forum.xda-developers.com/showthread.php?t=2492266
THANK YOU NOOB!!
I managed to get it fixed. Turns out HTC hosted that exact file so I downloaded it and it fixed my phone. Good times..
Ok I am having a weird issue with my phone now which seems to be totally different than all stories people have posted.
All people that have posted similar problems can't boot the phone and it gets stuck at the HTC screen when booting and they mentioned they can't use USB and some can't even charge the phone.
But for my case, after the HTC screen the mobile loads in the lock mode, showing only the clock and at the top left where the notifications are it is showing a warning mark but I can't read it cause phone is locked of course.
The USB connection works and luckily the USB debugging is enabled so I can have access to the phone through USB, but the problem is that I am stuck there, when I try to unlock the phone by pulling the window up, the HTC green loading screen comes instead and then it gets stuck there. but still the USB connection is working fine.
But after a short time which is 1 or 2 minutes, the phone restarts itself and then boots up again and does the same thing into an infinite loop until I shut it down.
I have the phone saying on boot loader Tampered, Unlocked but sadly its showing S-On
I have tried all the ways to make it S-OFF to try and lock the bootloader and remove the tamper so maybe it would help booting but I Can't get it to S-OFF.
The reasons are that my Hboot version is 2.46 and the android version is 4.3 so the only 2 working S-OFF programs for my versions are rumrunner and firewater.
For firewater I can't use it as it requires internet connection, but as I statted I Can't access the phone at all and it doesn't connect to wifi or even my SIM.
Rumrunner I have tried it, but the problem is when rumrunner gets to the "test 2" phase it takes long and the phone restarts itself before it manages to finish resulting in a CCCC error and ending the rumrunner program.
I remember what created the problem, I was trying to fix the fingerprint sensor and I RELOCKED the booter with oem through htcdev to see if it would help, after that when I went in bootloader it showed TAMPERED, RELOCKED and SECURITY WARNING, I got really scared so I unlocked the phone again with the unlock bin and it went back to normal and the security warning was gone, but from there the problem started.
I have tried wiping the cahce and all data and doing factory reset then I tried installing new ROMs but it didn't work for some reason.
I downloaded the kitkat rom and the jelly bean 4.2.2 ROM and tried both of them, it installs fine and everything is ok but the problem doesn't go and what is more weird is that even tho I installed the Jelly bean 4.2.2 ROM thorugh the Recovery screen, the adb still shows that my android version is 4.3 so I still can't use programs like revone or moonshine.
Please help me repair my phone
Does anyone know what can be wrong or what can I do?
I find it weird that even when installing ROMS this problem still occurs as if I never formatted the phone or installed a new ROM.
And still says Android 4.3 regards of what I do.
elbashadodo said:
Does anyone know what can be wrong or what can I do?
I find it weird that even when installing ROMS this problem still occurs as if I never formatted the phone or installed a new ROM.
And still says Android 4.3 regards of what I do.
Click to expand...
Click to collapse
try booting into bootloader then flash the boot.img from there. it sounds as if your boot.img is not flashing from recovery.
fastboot flash boot boot.img
is the command to flash the boot loader from fastboot usb.
nfinitefx45 said:
try booting into bootloader then flash the boot.img from there. it sounds as if your boot.img is not flashing from recovery.
fastboot flash boot boot.img
is the command to flash the boot loader from fastboot usb.
Click to expand...
Click to collapse
I did that and now it gets stuck at HTC without opening the phone at all and can't connect USB to it when its on anymore and now restarts the phone after it gets stuck at HTC after 20 seconds or something.
Now boot to recovery and flash the rom again.
Sent from my A200 using XDA Premium 4 mobile app
nfinitefx45 said:
Now boot to recovery and flash the rom again.
Sent from my A200 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just installed the CM 10.1 Nightlies and still same problem won't boot and stuck at the loading screen
elbashadodo said:
Just installed the CM 10.1 Nightlies and still same problem won't boot and stuck at the loading screen
Click to expand...
Click to collapse
Maybe try running the JB RUU. And where did you find CM for this phone? I have been waiting for that.
JBS976 said:
Maybe try running the JB RUU. And where did you find CM for this phone? I have been waiting for that.
Click to expand...
Click to collapse
I don't know I downloaded it from another site that said it should work for htc one max.
Well I will try the JB RUU and see how it goes.
I am downloading the JB RUU from this thread now http://forum.xda-developers.com/showthread.php?t=2708830
Its gonna take some time my internet is not so fast and its 1.1 GB will let you know after I test
elbashadodo said:
I don't know I downloaded it from another site that said it should work for htc one max.
Well I will try the JB RUU and see how it goes.
Click to expand...
Click to collapse
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
nfinitefx45 said:
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
Click to expand...
Click to collapse
Ok will try now
nfinitefx45 said:
Ok untill you actually get this booting correctly, stop just trying different roms. You are S-ON this means you will need to boot to bootloader flash the boot.img first then reboot to recovery and flash the rom that came with the boot.img. you should be doing this with a stock rom and boot.img for you specific device to make sure it works correctly.
If this does not work for you , you will need to run the RUU for you specific carrier. You will need to relock your phone in order to do the ruu
If you are just mix matching your **** it will never work correctly.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2584231
This should work fine right?
Cause I am from Egypt and my HTC One Max is International version.
elbashadodo said:
http://forum.xda-developers.com/showthread.php?t=2584231
This should work fine right?
Cause I am from Egypt and my HTC One Max is International version.
Click to expand...
Click to collapse
Yes if you are the international version. Just follow what it says and this should correct your issues
nfinitefx45 said:
Yes if you are the international version. Just follow what it says and this should correct your issues
Click to expand...
Click to collapse
Ok I have a quick question.
After the download is finished, how will I copy the ZIP file to my phone since it doesn't boot anymore.
Can I do that from the bootloader with fastboot? or do I need to get SD card and a reader to copy the data to it then put it on the phone?
elbashadodo said:
Ok I have a quick question.
After the download is finished, how will I copy the ZIP file to my phone since it doesn't boot anymore.
Can I do that from the bootloader with fastboot? or do I need to get SD card and a reader to copy the data to it then put it on the phone?
Click to expand...
Click to collapse
You need TWRP recovery to install the ROM and i hope you have it already. If not download TWRP and flash it.
In TWRP you have the option to mount your SD card and that should make your phone available as USB on your computer.
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
You may want to flash the stock sense 6 ROM which is available @ http://forum.xda-developers.com/showthread.php?t=2776665
pradeepvizz said:
You need TWRP recovery to install the ROM and i hope you have it already. If not download TWRP and flash it.
In TWRP you have the option to mount your SD card and that should make your phone available as USB on your computer.
---------- Post added at 05:26 PM ---------- Previous post was at 05:25 PM ----------
You may want to flash the stock sense 6 ROM which is available @ http://forum.xda-developers.com/showthread.php?t=2776665
Click to expand...
Click to collapse
Ok I don't know what actually happened but here is how it is.
I had Clockwork mod recovery so I flashed the TWRP you told me from this forums and right after I did and tried to go into recovery, the phone turned OFF and wouldn't get on again, also it showed me a battery with question mark on it so I thought maybe battery went out and it won't charge, after few minutes I found it showing HTC logo screen then it went off and wouldn't boot or open bootloader again.
I tried to press Volume up + power and all of a sudden it booted into the last ROM I installed which was CM 10.1 Nightflies I think and now the phone is working again some how
Ok it turned out to be that the Question mark screen is just the back ground of the TWRP recovery and it needed time to load thats all cause I managed to get into recovery now.
But the weird thing is that installing the TWRP recovery ONLY I didn't install or flash anything else, fixed the phone and its working fine now.
Now its working super fine.
I managed to make it S-OFF with firewater (rumrunner didn't work for me) and I locked it and removed the Tampered flag.
Now the phone is working great and finger print sensor is working again.
Thanks everyone for the help
elbashadodo said:
Now its working super fine.
I managed to make it S-OFF with firewater (rumrunner didn't work for me) and I locked it and removed the Tampered flag.
Now the phone is working great and finger print sensor is working again.
Thanks everyone for the help
Click to expand...
Click to collapse
Good to know, feel free to hit the thanks button
pradeepvizz said:
Good to know, feel free to hit the thanks button
Click to expand...
Click to collapse
Also since I installed the CM 10.1 and it had a google app package with it, it seems the google app package wasn't installed successfully when the phone was still broken.
Do you know any good ROM I should install that will come with the google app package? or anyway to get the original ROM or RUU I don't know
I mean the original OS
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help