Related
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
I think you use flashtool and flash a 2.1 firmware
Flash Tool
2.1 Firmware can also be found in the flashtool post.
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
kozxmartt said:
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
Click to expand...
Click to collapse
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
G-FACE said:
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
Click to expand...
Click to collapse
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Thanks a lot guys, it works !
same problem here but i have tried flash tool many time.what shall i do?
Hi jojooo89,
I suppose crossover might not help you in flashing even thought it might detect the phone after some tinkering.
flashing works only on windows either throught SEUS or flashtool...
the reason being usbflash.dll is only on windows.
jojooo89 said:
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
Click to expand...
Click to collapse
christos3290 said:
same problem here but i have tried flash tool many time.what shall i do?
Click to expand...
Click to collapse
If you can still get into x-recovery, you could try mounting your SD card, copying over a ROM and then installing it with x-recovery
kaisan1 said:
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Click to expand...
Click to collapse
This is not true. In 'Partition Tools' there is a 'Format System' option that formats everything including the system files/folders. Since XRecovery files are in the 'System' folder using this option removes XRecovery. There is a warning in the XRecovey thread to never use this option without having another system image to replace it with.
I would assume based on that warning though that there is some way to replace the system but thats a question for Z.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Yeap, i believe i'm screwed. i did that and well... my /system files are screwed.
if my battery is dead and i cant charge it from the phone what shall i do??
are you using a wall charger?
Sent from my X10 TripNMiUI using XDA Premium App
its something which i plug on the wall socket and then the usb is connected on that. no matter how many hours i leave it to charge as soon as i unplug the usb my phone turns off
jojooo89 said:
Thanks a lot guys, it works !
Click to expand...
Click to collapse
How did you fix the problem?
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Hzu said:
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Exactly, it worked perfect for me !
I format the system of my X8
Me too, I format the system of my Sony X8 with the Xrecovery and now when I reboot, I'm only getting the Sony Ericsson logo.
How can I repair the X8 smartphone? with flashtool and generic firmware?
where can I find that software?
system format, cannot flash
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Re: [Q] Oops, I've used format/system ... :)
Csabci85 said:
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Click to expand...
Click to collapse
Do you hold back button while flashing?
+no recovery?
sent via ULTIMATE GB beta
Hi, sorry if posting in wrong section
Im currently stuck in bootloop after modifying framework-res.apk.
Phone is of course rooted, used root explorer to paste the framework-res.apk, renamed the original one.
I have googled around a bit, and im pretty confused
Any ideas how to make it boot?
Thanks!!
As it is stuck in a bootloop , all u can do is flash a stock Rom again, I find this is the only solution or may be u can push stock framework if available using adb!!
Sent from my SK17i using XDA Premium App
Wenever modifying framework u shud always consider backing up your Rom!!
Sent from my SK17i using XDA Premium App
First, thanks for the replies !!!
I messed around with fastboot a little yesterday, and i have a little problem installing it. I finally figured out how to install the drivers, but I cant get adb open, it just closes after clicking on it
How can I get this work?
First of all you should have set right permissions for the file before restart
ADB starting only from command line, and if you use Vista or Seven just right click on the folder where ADB is situated and type "ADB"
use SEUS ... it's the easy way ...
um isnt that for older SE phones? Or maybe im wrong
I couldnt find anything about it..
Ok I finally got ADB working, however it cant find my phone :/
I connected it via fastboot (?), like holding down vol-up and plug in USB, phone gets a blue notification light up left.
Is this the right mode? Drivers should be working just fine according to device manager..
Thx
rubikum said:
Ok I finally got ADB working, however it cant find my phone :/
I connected it via fastboot (?), like holding down vol-up and plug in USB, phone gets a blue notification light up left.
Is this the right mode? Drivers should be working just fine according to device manager..
Thx
Click to expand...
Click to collapse
I think so
jaxzkeren said:
use SEUS ... it's the easy way ...
Click to expand...
Click to collapse
SEUS knows if you tried to modify your phone. It won't help.
SUES is like Big Brother, it's watching you... :creep:
rubikum said:
um isnt that for older SE phones? Or maybe im wrong
I couldnt find anything about it..
Click to expand...
Click to collapse
SEUS? or sony ericsson update service still work with android devices, in fact for me works better than PC companion....
Phantoome said:
SEUS knows if you tried to modify your phone. It won't help.
SUES is like Big Brother, it's watching you... :creep:
Click to expand...
Click to collapse
I have rooted, and modified the system with uto kitchen, and other mods here in the forum and still dont have any problem if I try to flash it with SEUS
Change the permission of the file which you have copied.
Don't worry it will work fine.
---------- Post added at 08:21 AM ---------- Previous post was at 07:49 AM ----------
Root Explorer Can do the trick.
hello.. im also stuck in boot loops.. so how can i fix this using adb tools ??? plsss help :\
reflash using wotanserver
may be you wrong to set permissions
sir please please please help me i have micromax A110 i have same problem but i have backup my data and it is in internal sd card i have backup data through clockword recovery but no luck it is just boot lopping please someone help
Lol this happends never, because i know how to modify framework-res.apk properly (lol), i build a flashable zip on my phone always to make sure it copied, and have a flashable zip with framework-res.
Well, the easiest solution is to reflash the ROM/framework-res.
Jader13254 is right, you should always have a rescue strategy before messing around with something like framework-res.apk. It sounds like you don't have cwm recovery installed, which sounds particularly crazy. The bootlooping is going to make it difficult to use adb or android commander or anything similar with out recovery. If you have cwm you have some options to push the working framework onto the phone, but with out cwm, I think you can only use SUS/SEUS/PCC or flashtool to repair your phone. Just check for any of the guides for rooting, unbricking, updating ,etc your device.
Hello
I've installed the [ROM] MiniCM7-2.1.9 following this steps
i've previously installed a CWM
restart in recovery
wiped data/reset factory
wiped battery
wiped all ...
install Rom
install gapp
and now my phone doesn't goes to recovery and all i get is a black screen whit "Sony Ericsson" legend
please some help.
i post here, because i haven't permissions to post in the developer forum asking for help in the thread
sorry about my bad english
Did you unlock your bootloader using Flashtool?
You also need the latest version of nAa kernel installed.
Thanks for the answer
I didn't unlock my bootloader using Flashtool i haven't do that before and didn't read the installing instructions for doing that my fault
and didn't installed nAa kernel, because i think didn't need to install the kernel obligatorily
is anything i can do to solve this problem ??
You do need the nAa kernel to run MiniCM7, it just won't work without it. Next time you think about installing a rom, make sure you read all the instructions first. Especially if you're using custom kernels as that's a good way to give your phone a real hard brick.
What you've got is a soft brick. The phone still works, it just doesn't work as a phone. A hard brick is when your phone doesn't do anything at all. Which is bad.
All you need to do is download and use Sony Ericsson Update Service. This updates your phone to the latest, official firmware. If it complains that you already have it, choose the option to reinstall it anyway.
This will wipe all the data on your phone, but not your sdcard, so you'll lose your contacts, sms's, etc but you backed up anyway, didn't you?
thanks Ticklefish for the answer
i did that and now i've my phone back =D
Mine wont do that :-/
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
@niko5878..
which rom are u using?
may be i can help..
Niko5878 said:
When i follow your steps Ticklefish i cant connect to the phone. it pops up with a message that tells me to pull down the status line which i cant because i only gets to the Sony Ericsson boot logo.
Got any tips for me?
thanks in advance
-Nikolaj
Click to expand...
Click to collapse
Is your phone in download mode when you get that message? And is it SEUS you're using or PC Companion?
Sent from my U20i using XDA App
I am usin PC-Companion,
but after severals trys i made it work, so thats just briliant, you saved my smartphone
Awesome forum!
Thanks alot Ticklefish!
Yashu1019 said:
@niko5878..
which rom are u using?
may be i can help..
Click to expand...
Click to collapse
I think i was using the same as in this thread, that might e why it failed, but i'll just start rooting my phone now, and then wait and see
i'll just search around x10 forum to check out some tutorials, but thanks anyway
Hi
I just purchased a new Lenovo ideapad A800 and now searching for a custom ROM for my new phone.I am also unable to ROOT my phone .SuperUser is also unable to give me root access.Need expert`s help
I need too.
Finally SuperOneClick Installed
neerajsain said:
Hi
I just purchased a new Lenovo ideapad A800 and now searching for a custom ROM for my new phone.I am also unable to ROOT my phone .SuperUser is also unable to give me root access.Need expert`s help
Click to expand...
Click to collapse
cacofonix3 said:
I need too.
Click to expand...
Click to collapse
:good:SuperOneClick did the trick.Finally i have rooted my Lenovo A800.
You can download Lenovo USB driver from Lenovo Russian Forums here
neerajsain said:
:good:SuperOneClick did the trick.Finally i have rooted my Lenovo A800.
You can download Lenovo USB driver from Lenovo Russian Forums here
Click to expand...
Click to collapse
The problem is that I made factory reset and the phone doesn't responding now.
What is SuperOneClick?
cacofonix3 said:
The problem is that I made factory reset and the phone doesn't responding now.
What is SuperOneClick?
Click to expand...
Click to collapse
Try to start with Volume Up key + Power Button.
And what ROM did you use?
cacofonix3 said:
And what ROM did you use?
Click to expand...
Click to collapse
I tried this: http://lenovo-forums.ru/Files/OS/A800/A800_RUS_S107.ZIP
It is stable, have ROOT possibility, English and Russian language. In Chinese forums i saw the new one, but i cant download it.
cacofonix3 said:
And what ROM did you use?
Click to expand...
Click to collapse
No ,i have`nt try any customize ROM.I just Rooted my phone with SuperOneClick.
If anyone is interested, on cacofonix3's request I have build an *experimental* and *untested* recovery and ROM for the A800 based on the P700i_ROW_S107
(the S107 hints it is probably pretty much the same as the Russian one mentioned above)
Warning:
- I do not have this phone, so I am not sure if it is a working ROM, I cannot test myself. It either works, or it does not.
- If you never done flashing before, don't try this, leave it to the experienced people to test first.
- Make sure you have the original ROM to go back to, like this one.
- Never flash preloader / uboot / mbr / ebr
- A800 has different partition table. Never use a scatter file for a different ROM.
Advise:
- First flash the recovery using the v3.1238 flash tool, and see if that works
- Put the ROM on the SD card
- Next boot into recovery and use that to flash the ROM.
- Also advised to wipe cache and data after flashing
- I do not have this phone, so I am not sure if it is a working ROM, I cannot test myself
Info:
The ROM is essentially the one described here, but with a800 kernel/modules/firmware and also a v0.01 marker to clearly indicate 'beta'.
The A800 is pretty similar as the P700i, except higher resolution, one button less, uses the MT6577T rather than MT6577, and I suspect uses the MT6628 rather than MT6620 radio subdie. As a result, when flashing this ROM, one of the following may happen:
- It does not work at all : solution flash factory ROM again
- GSM may not work : solution flash factory ROM again. OR: The GPS may work and also pick up Galileo...
- GPS/Wifi/BT may not work : we may work around this by swapping out some libraries. Or: The GPS may work and also pick up Galileo...
- Icons may appear smaller : should be OK, as it is a bigger schreen.
- 4th button is missing: Use buttonsavior as workaround for the recent apps button.
ROM and recovery can be downloaded here. Flash tool and USB driver from here
Ok, given that i receive no feedback, neither positive nor negative, but it is a rather untested and experimental ROM, I removed the download again.
cybermaus said:
Ok, given that i receive no feedback, neither positive nor negative, but it is a rather untested and experimental ROM, I removed the download again.
Click to expand...
Click to collapse
Hi ,I want to take risk .but when i try "flash tool".I am unable to load scatter file.Could you please help.
neerajsain said:
Hi ,I want to take risk .but when i try "flash tool".I am unable to load scatter file.Could you please help.
Click to expand...
Click to collapse
Getting SP flash tool error 8038.
You will have to show some screen shots to show exactly what you are doing, and where you get the error. Also, which version of the flash tool are you using.
Hey cybermaus,
I accidentally uninstalled all of apk in the internal storage of this phone, using wondershare mobile go, how can i reflash everything to stock settings? i can't install the settings.apk =(
or can i push settings.apk using root file manager?
ok i downloaded the stock rom
how can i flash it, can you provide me step by step please? :\
http://bm-smartphone-reviews.blogspot.nl/2012/05/mt6575-flashing-tutorial.html
thanks, i did installed usb_vcom_driver on mtk65*** preloader but how do i install flash tool drivers? there are missing dlls,another question i dumped the rom on sd card root using another phone, how can i access the recovery? can i just install the rom right away? im not rooted can i still do this?
chipseta said:
I tried this:
It is stable, have ROOT possibility, English and Russian language. In Chinese forums i saw the new one, but i cant download it.
Click to expand...
Click to collapse
hey i wanna know how did you flash it ? cause there is no install from zip card in the recovery
Not sure what you mean with 'flash tool drivers': the VCOM drivers are the ones you need. Also I know nothing about missing DLL.
hey thanks cybermaus i did it! :laugh: just followed your blog, but the rom is so slow the i dowloaded the A800_RUS_S107, what other roms can i use?
I cant reinstall the official ROM, so then ROOT and then install cybermaus' ROM.
The factory ROM is dead. I can't see the apps, anything, only system settings. When I made a factory reset it says the following:
Factory Mode
Full Test
Item Test
Test Report
Clear eMMC
Version
Reboot
Sent from my Lenovo A750 using xda app-developers app
I'm very curious about flashing ROMs. Now I have problem with my funbook infinity but I have all flashing softwares which is required for flashing like Original Funbook Factory Image, Livesuit, USB drivers etc. I'm scared and in doubt that will flashing my tab will fix all problems. I want to be confirmed that flashing will help me to fix my problem with the tab and it will not do any permanent damage to my funbook tab.
1- will it solve problems?
If software problem, probably. If hardware problem, definitely not.
2- got risk of bricking/damaging/create more problems?
There's always risk.
Sent from your phone
No Not All
Flashing Of Rom Only Fixes Missing File Problem ;incompability but not any hardware Problem.......
Tegroid said:
I'm very curious about flashing ROMs. Now I have problem with my funbook infinity but I have all flashing softwares which is required for flashing like Original Funbook Factory Image, Livesuit, USB drivers etc. I'm scared and in doubt that will flashing my tab will fix all problems. I want to be confirmed that flashing will help me to fix my problem with the tab and it will not do any permanent damage to my funbook tab.
Click to expand...
Click to collapse
Before even flashing a rom, what's wrong with it?
Sent from an Xposed LG-G2/LS-980
if you take the right procedure,flashing rom will not make any permanent damage to your funbook.
in my experience flashing rom is make our device back to original if you flash factory rom.
if problem come from OS yes your problem will fix,
but if problem come from hardware like camera ic, lcd etc. no you can't fix your problem
Driver
rahulraz said:
Flashing Of Rom Only Fixes Missing File Problem ;incompability but not any hardware Problem.......
Click to expand...
Click to collapse
If I flash my tab with livesuit then does it will need the google USB driver or my funbook device driver distributed from its official website.
Critical Detox said:
Before even flashing a rom, what's wrong with it?
Sent from an Xposed LG-G2/LS-980
Click to expand...
Click to collapse
To know about my problem goto ->http://forum.xda-developers.com/showthread.php?t=2583218&highlight=reset+after+every+reboot
have you try enter to recovery mode?
yes
droidinterest said:
have you try enter to recovery mode?
Click to expand...
Click to collapse
Yes I have stock recovery (e3 recovery). But in my problem there no option,text except a android lying with a red triange. What should I do ? should i try to flash with livesuit ? God bless U :angel:
Tegroid said:
Yes I have stock recovery (e3 recovery). But in my problem there no option,text except a android lying with a red triange. What should I do ? should i try to flash with livesuit ? God bless U :angel:
Click to expand...
Click to collapse
if no option or you just see an android lying , try press home button ( don't hang up) just press. if option isn't shown yet, try press on/off button
Use
Its Necessary That U Should 1st Make A Backup . nd then try rom. if anything goes wrong then just Restore The rom.
If U want to know that u will need USB drivers after flashing Rom then ask the person who know about that rom ....
Doesn't work
droidinterest said:
if no option or you just see an android lying , try press home button ( don't hang up) just press. if option isn't shown yet, try press on/off button
Click to expand...
Click to collapse
Home button didn't work but power on/off button turned off my funbook. I turned on my funbook again the same problem mentioned in this thread --> http://forum.xda-developers.com/showthread.php?t=2583218&highlight=reset+after+every+reboot I have 2 option left (1) goto it's service center for its repair and void my warranty buy saying that this problem is caused by downloading the busybox x software from play store. (2) Flash it with Original Funbook factory Image. Tell me which option should I choose 1 or 2 ??
100% 2nd
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
OK
rahulraz said:
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
Click to expand...
Click to collapse
Ok I have the stock Funbook factory Image. But my doubt is not that. My device go reset after every reboot so my question is:
Q: During the flashing process the device may boot several times, so will the reset problem interfere between flashing process ?
Q: Interfere by reset problem will not cause any malfunction to my funbook.
MMX FTP
rahulraz said:
They Will Dont Take Money Fpr That Even For Bricking .
I Have try it.
Flash Stock image
i recommend ........
Click to expand...
Click to collapse
I got the stock funbook factory image from official Micromax FTP server. The links are here -->> http://forum.gsmhosting.com/vbb/f811/firmwares-collection-micromax-android-all-flash-file-only-here-mega-thread-1624105/. This is the collection of original stock Micromax ROMs of various micromax mobiles & tablets.
Ok Install that
Tegroid said:
I got the stock funbook factory image from official Micromax FTP server. The links are here -->> http://forum.gsmhosting.com/vbb/f811/firmwares-collection-micromax-android-all-flash-file-only-here-mega-thread-1624105/. This is the collection of original stock Micromax ROMs of various micromax mobiles & tablets.
Click to expand...
Click to collapse
just installed the original stock image and problem will solved
rahulraz said:
just installed the original stock image and problem will solved
Click to expand...
Click to collapse
Ok I'm starting the flashing process using livesuit
Ok Do That
Tegroid said:
Ok I'm starting the flashing process using livesuit
Click to expand...
Click to collapse
Ok Then
Simply Do ThaT If Facing Problem Just Quote Here.
It worked for me. My problem got fixed. Thanks a lot Rahul !!!