[Q] full unlock for my Htc 7 Mozart... (perhaps n00b qn) - 7 Mozart General

Good afternoon all,
Firstly, apologies if this is a bit of a n00b question, i HAVE googled and searched these forums but have found some convoluted, old or confusing information and would like some straight and up to date answers if possible please. I have quite a complex ANDROID history, and flashing, unlocking, S-OFF-ing phones to me is straight forward enough but having moved to WP7 recently i feel a little out of my comfort zone.
My Device:
Phone Model: HTC 7 Mozart T8698
Windows Phone 7.8
FW revision number: 2250.21.51303.401
HW revision number: 0004
Radio SW version: 5.71.09.02a_22.51.50.21U
Radio HW version: A.102.0.D4
Bootloader version: 5.13.2250.3(135167)
Chip SOC Version: 2.2.5.0
Judging from the info above, i can work out that for a FULL unlock i need to downgrade the bootloader (i think)... If I manage to do this (using posts on these forums, a Y-cable, SD card, SD card reader and other magical bits of software) then what are the next steps to obtaining a Full unlock (and being able to install apps via side-load or XAP files)?
I am not bothered to have a custom ROM if I don't have to.
Also are there any NEGATIVE sides to having downgraded boot-loader, unlocked ROM etc? WP7 is great and I don't really want to upset certain features if I can help it!
Again, apologies for certain n00b type questions, i just hope that you understand that I haven't just dived in and asked silly questions, I HAVE tried to research already, but came up with confusion!

you can follow what i posted here yesterday remember to say a thanks if it helps
scroll down to my post
http://forum.xda-developers.com/showthread.php?t=2141453
or if you just want a simple unlock i belive this is what u have to do but with the rom installation in my post it is fully unlocked and u can do what u like with the phone for me the custom rom is great and works really well
http://forum.xda-developers.com/showthread.php?t=857127
hope this helps let me know

beany2009 said:
you can follow what i posted here yesterday remember to say a thanks if it helps
scroll down to my post
http://forum.xda-developers.com/showthread.php?t=2141453
or if you just want a simple unlock i belive this is what u have to do but with the rom installation in my post it is fully unlocked and u can do what u like with the phone for me the custom rom is great and works really well
http://forum.xda-developers.com/showthread.php?t=857127
hope this helps let me know
Click to expand...
Click to collapse
Hi, I actually found your post last night and dived straight in, managed to get Dynamics 2.0 on my phone with HSPL 1.30 installed. (Thanks to follow)... only issue i have now is (seeing as Im a WP7 n00b) that I cant seem to work out how to install XAP's - i've tried emailling them to myself, and placing on a google-drive then downloading with the google drive app, and finally pointing IE on my phone to said XAP... none of these seem to do anything for me... am I missing something?!?!?!

had the same prob mate
install this "vm_web.exe"
http://www.microsoft.com/en-us/download/details.aspx?id=13890
let it install (will require a restart) let it finish
then click windows start button scroll down to "windows phone developer tools"
the click "application deployment"
make sure u have zune up aswell then browse to your xap u want to install then click deploy
when finished look on your phone slide to the list and it should be there waiting for you
hope this helps

beany2009 said:
had the same prob mate
install this "vm_web.exe"
http://www.microsoft.com/en-us/download/details.aspx?id=13890
let it install (will require a restart) let it finish
then click windows start button scroll down to "windows phone developer tools"
the click "application deployment"
make sure u have zune up aswell then browse to your xap u want to install then click deploy
when finished look on your phone slide to the list and it should be there waiting for you
hope this helps
Click to expand...
Click to collapse
Just installing now, just a quick note for you... vm_web.exe is only compatible with Vista & 7, I am running XP SP3 on my machine so had to follow the (simple) instructions at this thread:
http://forum.xda-developers.com/showthread.php?t=1033789
Will report back with how it goes once its installed...

ah yeah forgot to mention that bit hehe and oki mate glad u found a solution let me know if you manage to get your xap installed

beany2009 said:
ah yeah forgot to mention that bit hehe and oki mate glad u found a solution let me know if you manage to get your xap installed
Click to expand...
Click to collapse
Ok, all installed, rebooted and kids picked up from school... Now all it seems to have installed is the following folders in my start menu:
Microsoft Expression
Microsoft Silverlight
Microsoft Silverlight 3 SDK
Microsoft Silverlight 4 SDK
Microsoft Visual Studio 2010 Express
Microsoft XNA Game Studio 4.0
No sign of the things your directing me to? Im VERY confused now... Did I install the correct thing?!?!

mmm and u havent got windows phone developer tools right at the bottom of your list?
maybe try a search see if its somewhere else mate coz u on xp
---------- Post added at 04:50 PM ---------- Previous post was at 04:37 PM ----------
maybe try this never seen it before but did bit of searching might work if so then u can uninstall the other thing may be worth a shot
http://forum.xda-developers.com/showthread.php?t=1016766
---------- Post added at 04:54 PM ---------- Previous post was at 04:50 PM ----------
or this
http://dev.windowsphone.com/en-us/downloadsdk
http://msdn.microsoft.com/en-us/library/windowsphone/develop/ff769512(v=vs.105).aspx

Thanks, XAPDeployX works a treat, now to find some cool XAP files... dont really even know where to begin looking
^^ (That was merely a comment, not a request for illegal wares or locations of them!)

lol mate glad ur all sorted

Related

Vodafone 845

Good Evening,
I understood that each device has different ways to get rooted.
If that is wrong I am sorry.
Now... I have a Vodafone 845 and saw great apps on market only for rooted devices.
Normally I would like to have those.
I surfed the xda Forum and found some discuss about this device but root links are to x10 (sony ericsson I believe).
Because of my understanding that confused me.
Anyway, I am dummy in android and did`t understand a lot from those procedures.
My request is: would you guys please make a step by step guide for dummies (with simply english) like me in android?
THAT WOULD BE GREAT!
My devise characteristics are:
Vodafone 845 ( Huawei U8120 ?)
android 2.1 update 1
baseband version 2210
kernel version 2.6.29-perf
locked in Vodafone Romania.
Thank you in advance for your help!
Respectfully.
Wonderful
This is absolutely great!!!
So many advice, so many guidance!
I really can`t choose between those.
Seems that my post is written with invisible ink!
Do This
XLNCDK said:
This is absolutely great!!!
So many advice, so many guidance!
I really can`t choose between those.
Seems that my post is written with invisible ink!
Click to expand...
Click to collapse
Hey bro I just saw ya post now, I too have a vodafone 845. What you must first do is root your device using superboot, and then you need to pur a custom recovery using amonra recovery. Our device is synonymous with the u8120. If you search for any roms dealing with u8120, you can use it on this device as well. You should connect the phone via usb to a win7 pc and then follow the directions on how to root etc. These directions can be found on the page that deals with Fresh Zodiac Fruit by Cedric. If you follow these directions to the letter you will have no problem rooting your device and installing a custom rom. Once you have a custom rom on, I would advise installing rom manager from the market. Once Rom manager is installed, flash Huawei Ideos 1 recover image. Then put cm7 u8120 slyking on your sd card and flash that, it is, as far as I am concerned, the best rom for this phone nowdays. When you got some experience using and flashing roms, download v6 supercharger and play around with that, you will be amazed at the results. Anyways bro, just remember vodafone 845=U8120. Once you got this, searching is easy.
THANK YOU
Thanks Bro , I just saw your reply.
Just when I lost any hope of a reply.
From your reply seems a lot of trouble to root my device.
I rooted my phone and now of course I got a bigger problem.
From the moment I bought the phone I hated the calendar,
so I tried lots of calendar apps from the market and stopped the search when
I found aCalendar which suited me excelent.
yesterday after I rooted the phone I erased the original calendar.
This morning when I tried to open the aCalendar ...surprise,
the app didn`t open and the screen shown: OnCreate|NullPointerException null şi apoi OnResume|......
I restored to factory settings and nothing ... same message.
Would you help me please with that?
Or some guru, PLEASE HELP.

[Q] Windows Phone 7.8 (8862) And Interop Unlock

Hello to all of XDA Developers!
I ask for help to Unlock my Omnia W What is with the latest version 8862 and I am in great need to Jailbreak it. If possible, send me the method or how to Downgrade If you need the latest version does not have Jailbreak.
Sorry for the bad English, I am Brazilian and I used Google Translator.
thank you
Jonathanwcp said:
Hello to all of XDA Developers!
I ask for help to Unlock my Omnia W What is with the latest version 8862 and I am in great need to Jailbreak it. If possible, send me the method or how to Downgrade If you need the latest version does not have Jailbreak.
Sorry for the bad English, I am Brazilian and I used Google Translator.
thank you
Click to expand...
Click to collapse
Search the forum, methid has been posted by Heathcliff74
http://forum.xda-developers.com/showthread.php?t=1271963
.
Jigneshg said:
Search the forum, methid has been posted by Heathcliff74
http://forum.xda-developers.com/showthread.php?t=1271963
Click to expand...
Click to collapse
Sorry but still not managed to make Interop Unlock on my phone, I need help! That part has to do Diagnostic catch the XAP not working ... Can you give me a hand?
Download this file and extract all http://wp7roottools.com/index.php/d...nterop-unlock-for-1st-gen-samsung-wp7-devices follow the guide offered there. I've omnia w and it worked for me at 1st attempt. Good luck
nice
nice
Petoch said:
nice
Click to expand...
Click to collapse
if I help you anyway...thn plz click on thanks button at bottom left corner of my post.
Hello
I`ve a problem on my windows phone 7.8 when i try this unlock i could not get access to the internet.
in my gprs manager in the diagnostic menu with *#9908# there are 5 gprs profiles on my phone and
noone did function
Suwon2G Test bed
Suwon3G test bed
Heatcliff74 Interop Unlock
System Tweaks
maybe someone can help me, i`ve the latest software on my samsung omnia 7 phone
best regards
mikey20333 said:
Hello
I`ve a problem on my windows phone 7.8 when i try this unlock i could not get access to the internet.
in my gprs manager in the diagnostic menu with *#9908# there are 5 gprs profiles on my phone and
noone did function
Suwon2G Test bed
Suwon3G test bed
Heatcliff74 Interop Unlock
System Tweaks
maybe someone can help me, i`ve the latest software on my samsung omnia 7 phone
best regards
Click to expand...
Click to collapse
Install wireless manager from marketplace and then tap on apn, unselect automatic apn, then select any other service provider from the list below and close app. Now again do this all but this time select all as it was before. Do reply if its work or not.
hello
thanks for the fast answer, but i have no access to the internet, it means no marketplace no twitter and so on.
thx.
mikey20333 said:
hello
thanks for the fast answer, but i have no access to the internet, it means no marketplace no twitter and so on.
thx.
Click to expand...
Click to collapse
do hard reset. And after that install wireless manager app, and then try interop unlock. Hope it works. And do click on THANKS button if you wish.
hi there, i have a developer's unlocked hd7 with limit to xap deployments...i can deploy only up until 2...i tried to interop unlock it but even if i did everything correct i still get an error for interop xap apps, like wp7root tools...is there anything else i can do??
thnx in adv
I have the same problem. I hope someone would help us.
---------- Post added at 02:01 AM ---------- Previous post was at 01:45 AM ----------
I have the same problem. I hope someone would help us.
Same thing here, tried pretty much everything, every instruction or tutorial i could find on the internet, but i'm still not able to unlock my samsung omnia 7... The steps that Maina16 forwarded have gone correctly according to the instructions but still i'm not able to deploy wp7 root tools... I'm slowly starting to lose hope with this
arnodude53 said:
Same thing here, tried pretty much everything, every instruction or tutorial i could find on the internet, but i'm still not able to unlock my samsung omnia 7... The steps that Maina16 forwarded have gone correctly according to the instructions but still i'm not able to deploy wp7 root tools... I'm slowly starting to lose hope with this
Click to expand...
Click to collapse
With the Omnia 7 you can install custom rom ...
custom rom : http://forum.xda-developers.com/omnia-7/development
process : http://forum.xda-developers.com/showthread.php?t=1485569
Will it work for my Omnia7?
Hui guys,
i dont want to create a new thread, thats way i will use this thread and hope somebody can tell me the answer.
I have an Omnia7 and i want to backup all my messages. My phone has at the moment only the developer unlock.
On my phone there is the OS version 7.10.8862.144
And i want to do the interop unlock. My Phone was interop unlocked until i updated to WP 7.8 as it was released by microsoft. After this update i lost the interop unlock .
Now i want to ask you if it is possible to get the interop unlock back to install the homebrew app SMSBackup?
I read everyime hard reset... But when i do a hard reset all my messages will be deleted... and then i will not need to backup my messages anymore
So could you please help me?
thanks in advance.
problem Samsung omnia M
Hi there,
I also have got the same problem as above but I've got omnia M, but it is also second generation, right? I made all tricks and both two methods from the Heathcliff74XDA Interop Unlock for 2nd gen Samsung WP7 devices but I dont have this position in GPRS manager so I cant tick it, I also have got developer unlock, and I also have got same error when tryin to deploy root tools. What did I mess? What else can I do?
Thanks for your support.
Bye

Stock ROM for FeiTeng Android S4 9500mini

Hello.
I am searching for a ROM (Stock or Custom) for a china phone.
It is a SingleCore 3,5 inch SC6820 phone.
RAM and ROM 256 MB
The link shows the Phone.
The name is FeiTenk M-Horse 9500mini
Anyone a idea?
h**p://***.aliexpress.com/store/product/New-3-5-Inch-mini-S4-Capacitive-Screen-android-smartphone-cell-phone-Android-4-1-1/905610_951985078.html
Additional Inforamtions.
6820_2.3.5_c913_jhm_e08_2p_v02
it is Android 2.3.5
Do anyone have a ResearchDownload Backup for this phone?
Its a GT-9500 (2013 Andrioid S4 FeiTeng M-Horse 9500mini Phone with 3.5 inch screen and sc6820 CPU, No Front Cam and no GPS)
andi290276 said:
Hello.
I am searching for a ROM (Stock or Custom) for a china phone.
It is a SingleCore 3,5 inch SC6820 phone.
RAM and ROM 256 MB
The link shows the Phone.
The name is FeiTenk M-Horse 9500mini
Anyone a idea?
h**p://***.aliexpress.com/store/product/New-3-5-Inch-mini-S4-Capacitive-Screen-android-smartphone-cell-phone-Android-4-1-1/905610_951985078.html
Additional Inforamtions.
6820_2.3.5_c913_jhm_e08_2p_v02
it is Android 2.3.5
Do anyone have a ResearchDownload Backup for this phone?
Its a GT-9500 (2013 Andrioid S4 FeiTeng M-Horse 9500mini Phone with 3.5 inch screen and sc6820 CPU, No Front Cam and no GPS)
Click to expand...
Click to collapse
I would like this too. Thanks in advance.
May have the correct rom for 9500mini m-horse and others
Hi,
I have compiled all the software and roms needed to factory-flash and root my M-horse 9500mini.
I have included my "how to" notes in each directory.
I know this phone is sold under many badges from China and I believe yours is one of these.
There are two roms (*.Pac) included, one is Android 4.n (I use this,) and the other I believe is Android 2.n (denoted at end of file name by 4p and 2p).
I have only tested the Android 4.n rom.
Programs include : latest root-master, latest super-user, latest Research-download and Phone drivers for Win XP including USB to Serial drivers.
Download from the following links and use 7zip or other program to join the two files together.
Sorry about the size of files, the rom images are quite large.
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
It took a few evenings to search and learn how to get my phone working again (thanks google translate,) after stupidly deleting an important app so I hope this compilation helps someone else recover theirs.
---------- Post added at 01:29 AM ---------- Previous post was at 01:08 AM ----------
P.S. I have just tested the links and found some foul adverts on zippyshare's site. I am sorry if this offends some one. I will find a better file-host site when I can.
m horse gt 9500 mini
nonentity1 said:
Hi,
I have compiled all the software and roms needed to factory-flash and root my M-horse 9500mini.
I have included my "how to" notes in each directory.
I know this phone is sold under many badges from China and I believe yours is one of these.
There are two roms (*.Pac) included, one is Android 4.n (I use this,) and the other I believe is Android 2.n (denoted at end of file name by 4p and 2p).
I have only tested the Android 4.n rom.
Programs include : latest root-master, latest super-user, latest Research-download and Phone drivers for Win XP including USB to Serial drivers.
Download from the following links and use 7zip or other program to join the two files together.
Sorry about the size of files, the rom images are quite large.
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
It took a few evenings to search and learn how to get my phone working again (thanks google translate,) after stupidly deleting an important app so I hope this compilation helps someone else recover theirs.
---------- Post added at 01:29 AM ---------- Previous post was at 01:08 AM ----------
P.S. I have just tested the links and found some foul adverts on zippyshare's site. I am sorry if this offends some one. I will find a better file-host site when I can.
Click to expand...
Click to collapse
Hi. I have same phone. I was installed a lot of same firmware but every time phone screen do not work. Phone is working but screen is only white. Methinks display size or resulation is not compatible with my phone. I do not try your roms yet. What is the phone display size and screen resulation of your phone? Also can you send your phone photos to here? I will try your roms today. I want to discover my trouble. Thanks so much...
screen size
The screen size is 3.5 inch at a resolution of 480 x 602 . I will post photos of my phone soon. Here is a link for the same phone.
It will have to be cut and pasted as I am too new to this site to post links..
taldykorgan.alm.slando.kz/obyavlenie/smartfon-m-horse-9500-mini-novyy-ID4FoER.html
andi290276 said:
Hello.
I am searching for a ROM (Stock or Custom) for a china phone.
It is a SingleCore 3,5 inch SC6820 phone.
RAM and ROM 256 MB
The link shows the Phone.
The name is FeiTenk M-Horse 9500mini
Anyone a idea?
h**p://***.aliexpress.com/store/product/New-3-5-Inch-mini-S4-Capacitive-Screen-android-smartphone-cell-phone-Android-4-1-1/905610_951985078.html
Additional Inforamtions.
6820_2.3.5_c913_jhm_e08_2p_v02
it is Android 2.3.5
Do anyone have a ResearchDownload Backup for this phone?
Its a GT-9500 (2013 Andrioid S4 FeiTeng M-Horse 9500mini Phone with 3.5 inch screen and sc6820 CPU, No Front Cam and no GPS)
Click to expand...
Click to collapse
hello, look : forum.china-iphone.ru/m-horse-nokia-920-mini-sc6820-3-5-android-2-3-5-t28051.
before the link put
Here It Is!
andi290276 said:
Hello.
I am searching for a ROM (Stock or Custom) for a china phone.
It is a SingleCore 3,5 inch SC6820 phone.
RAM and ROM 256 MB
The link shows the Phone.
The name is FeiTenk M-Horse 9500mini
Anyone a idea?
h**p://***.aliexpress.com/store/product/New-3-5-Inch-mini-S4-Capacitive-Screen-android-smartphone-cell-phone-Android-4-1-1/905610_951985078.html
Additional Inforamtions.
6820_2.3.5_c913_jhm_e08_2p_v02
it is Android 2.3.5
Do anyone have a ResearchDownload Backup for this phone?
Its a GT-9500 (2013 Andrioid S4 FeiTeng M-Horse 9500mini Phone with 3.5 inch screen and sc6820 CPU, No Front Cam and no GPS)
Click to expand...
Click to collapse
http://www.needrom.com/?s=Feiteng&sa=search&scat=0
nonentity1 said:
The screen size is 3.5 inch at a resolution of 480 x 602 . I will post photos of my phone soon. Here is a link for the same phone.
It will have to be cut and pasted as I am too new to this site to post links..
taldykorgan.alm.slando.kz/obyavlenie/smartfon-m-horse-9500-mini-novyy-ID4FoER.html
Click to expand...
Click to collapse
Thanks for your reply. Your rom file is not compatible with my phone. I continuously searching for "m-horse 9500 mini" rom file. If I find it share with you on this board. Thanks for all.
Hello!
I'm new here. I had my first android device recently and I have no idea how to root. I would like to try the rom. The device is M-horse 9500 Mini 3.5" Android 4.1.1 SC6820 1.0GHz. I searched for some software for rooting but can't find one that supports this device.
What safe software can I use?
Thanks!
hello I'm talking little English.
I am looking for a program-root (superuser) to this phone please link
@nonentity1
thanks for your sharing. I managed to salvage my locked phone due to "too many attempt patterns" by flashing your pac file. Rooted the phone as well. Excellent sharing.
Just a small request, if you have any easy way to flash CWM, please share it with us.
Files Archives Corrupt or Damaged
nonentity1 said:
Hi,
I have compiled all the software and roms needed to factory-flash and root my M-horse 9500mini.
I have included my "how to" notes in each directory.
I know this phone is sold under many badges from China and I believe yours is one of these.
There are two roms (*.Pac) included, one is Android 4.n (I use this,) and the other I believe is Android 2.n (denoted at end of file name by 4p and 2p).
I have only tested the Android 4.n rom.
Programs include : latest root-master, latest super-user, latest Research-download and Phone drivers for Win XP including USB to Serial drivers.
Download from the following links and use 7zip or other program to join the two files together.
Sorry about the size of files, the rom images are quite large.
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
It took a few evenings to search and learn how to get my phone working again (thanks google translate,) after stupidly deleting an important app so I hope this compilation helps someone else recover theirs.
---------- Post added at 01:29 AM ---------- Previous post was at 01:08 AM ----------
P.S. I have just tested the links and found some foul adverts on zippyshare's site. I am sorry if this offends some one. I will find a better file-host site when I can.
Click to expand...
Click to collapse
Hi, I have downloaded the files but I am unable to extract the contents. 7-zip and WinRar both say the archive is corrupt.
Please help me.
Don4418 said:
Hi, I have downloaded the files but I am unable to extract the contents. 7-zip and WinRar both say the archive is corrupt.
Please help me.
Click to expand...
Click to collapse
Try downloading it again. Or you can download it from my DropBox link below.
https://www.dropbox.com/s/h3ioogp9chg8pwn/M-horse 9500mini SC.zip
White Screen
magic.hand said:
Try downloading it again. Or you can download it from my DropBox link below.
Thank u so much magic.hand for the files. I got them from ur dropbox. But after flashing the file successfully the phone works but the screen is white. Though I can't see anything on the screen, I can tell that the phone is working which means the display is the only problem. Is there anything I can do to fix this? Please help me out, friends. Thank you all!
Click to expand...
Click to collapse
Don4418 said:
magic.hand said:
Try downloading it again. Or you can download it from my DropBox link below.
Thank u so much magic.hand for the files. I got them from ur dropbox. But after flashing the file successfully the phone works but the screen is white. Though I can't see anything on the screen, I can tell that the phone is working which means the display is the only problem. Is there anything I can do to fix this? Please help me out, friends. Thank you all!
Click to expand...
Click to collapse
It's hard to say about this as the spare part maybe rare.
Even though I "operate" my phones myself, but in order to fix any phone, you have to tear it apart and check if there is any cable loose broken.
By your statement, this can be your LCD malfunction. I tried to search around, but spare part seems to be difficult.
My only suggestion now is, dissemble your phone and check if there is any loose cable joint or something.
Click to expand...
Click to collapse
It May Be Display Settings
magic.hand said:
Don4418 said:
It's hard to say about this as the spare part maybe rare.
Even though I "operate" my phones myself, but in order to fix any phone, you have to tear it apart and check if there is any cable loose broken.
By your statement, this can be your LCD malfunction. I tried to search around, but spare part seems to be difficult.
My only suggestion now is, dissemble your phone and check if there is any loose cable joint or something.
Click to expand...
Click to collapse
Hi,
Thanks for your response. But I think it has to do with the display settings for the rom file I have flashed. Before the phone got bricked, the display was working fine, except the phone was pattern locked and I tried to format it. Even though, the format was successful the phone started boot looping. It would just display the boot logo and restart. So now that I've flashed with the file you gave me, it boots fully and I can hear the start up tone and even the touch tones when I touch certain parts of the screen. But the screen remains white throughout. So I am thinking if there is a way to edit/ modify the display settings for the rom before flashing it. I have no idea about it though. But I hope someone here can help me out.
Click to expand...
Click to collapse
Adrian_07 said:
Hello!
I'm new here. I had my first android device recently and I have no idea how to root. I would like to try the rom. The device is M-horse 9500 Mini 3.5" Android 4.1.1 SC6820 1.0GHz. I searched for some software for rooting but can't find one that supports this device.
What safe software can I use?
Thanks!
Click to expand...
Click to collapse
All the software you should need with "readme.txt" notes may be found by these links:
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
you will need to unzip the two files together (using 7zip or similar) to rebuild the original files for use.
---------- Post added at 01:43 AM ---------- Previous post was at 01:33 AM ----------
dans12949 said:
hello I'm talking little English.
I am looking for a program-root (superuser) to this phone please link
Click to expand...
Click to collapse
All the software you should need with "readme.txt" notes may be found by these links:
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
you will need to unzip the two files together (using 7zip or similar) to rebuild the original files for use.
It's not your phone, it's the ROM!
Don4418 said:
... I think it has to do with the display settings for the rom file I have flashed....But the screen remains white throughout. So I am thinking if there is a way to edit/ modify the display settings for the rom before flashing it. I have no idea about it though. But I hope someone here can help me out.
Click to expand...
Click to collapse
I think there's nothing wrong with your phone ... you just haven't found the correct ROM. It will work like 'out of the box' as soon as you reflash.
Modifying the display setting for the ROM? I think you have to start with exactly the right ROM ... unless someone else joins this thread, who has more knowledge!
I was able to get my M-HORSE 9500mini working again by searching the site, NeedROM. I never got the 'white screen' but only because I avoided flashing anything that wasn't (exactly right) for my model. But, I saw others who had the same problem you reported, for this same phone.
NeedROM provides detailed phone identification info, even down to photos of the labels under the battery. Don't use the ROM until you see that everything matches 100%.
Just the name of the phone isn't enough ... this phone comes in different builds, sharing the same name. You would be the only one who could make sure, with the phone in your hand, and matching it exactly with the details accompanying each ROM before downloading or flashing anything.
Good luck!
Belamigo said:
I think there's nothing wrong with your phone ... you just haven't found the correct ROM. It will work like 'out of the box' as soon as you reflash.
Modifying the display setting for the ROM? I think you have to start with exactly the right ROM ... unless someone else joins this thread, who has more knowledge!
I was able to get my M-HORSE 9500mini working again by searching the site, NeedROM. I never got the 'white screen' but only because I avoided flashing anything that wasn't (exactly right) for my model. But, I saw others who had the same problem you reported, for this same phone.
NeedROM provides detailed phone identification info, even down to photos of the labels under the battery. Don't use the ROM until you see that everything matches 100%.
Just the name of the phone isn't enough ... this phone comes in different builds, sharing the same name. You would be the only one who could make sure, with the phone in your hand, and matching it exactly with the details accompanying each ROM before downloading or flashing anything.
Good luck!
Click to expand...
Click to collapse
Yeap, agree with you.
You may need to get into your phone's "Factory Test" mode by pressing Vol UP + Power. From here you should be able to see more info about your previous ROM. Then you can start searching around.
It took me almost 1 month before I got into this thread, flashed the file and got my phone working. I am still looking for working recovery for the phone.
nonentity1 said:
Hi,
I have compiled all the software and roms needed to factory-flash and root my M-horse 9500mini.
I have included my "how to" notes in each directory.
I know this phone is sold under many badges from China and I believe yours is one of these.
There are two roms (*.Pac) included, one is Android 4.n (I use this,) and the other I believe is Android 2.n (denoted at end of file name by 4p and 2p).
I have only tested the Android 4.n rom.
Programs include : latest root-master, latest super-user, latest Research-download and Phone drivers for Win XP including USB to Serial drivers.
Download from the following links and use 7zip or other program to join the two files together.
Sorry about the size of files, the rom images are quite large.
www27.zippyshare.com/v/39152105/file.html
www49.zippyshare.com/v/74378565/file.html
It took a few evenings to search and learn how to get my phone working again (thanks google translate,) after stupidly deleting an important app so I hope this compilation helps someone else recover theirs.
---------- Post added at 01:29 AM ---------- Previous post was at 01:08 AM ----------
P.S. I have just tested the links and found some foul adverts on zippyshare's site. I am sorry if this offends some one. I will find a better file-host site when I can.
Click to expand...
Click to collapse
I used this rom my mobile is on but touch screen not working ;;;;
HOW TO RECOVER TOUCH FILES?

[Help] TWRP On PPTV King 7s

Hello there, I bouth a pptv king 7s and recived it yesterday. I want to install/fastbook TWRP on it so i can pull the original framework from the phone and have a backup. I tried to fastboot the phone with the pptv king 7 TWRP that i found on this forum but it didn't work, i assume its because there is some difference between the 7 and 7s because the 7s has a 3d display.
now my question is. can some of you help me to manage to fastboot the phone so i can pull the original framework from it or does some one else have the original framework? i would like to install TWRP on it later and Xposed Framework.
If i try to install the pptv king 7 framework i will lose all my 3d apps and the 3d wont work and won't be calibrated.
I am willing to try almost everything. And is it possible to install some 3d deep settings like the htc evo 3d (i think?) had.
Thanks.
Edit: the phone is standard rom/firmware and rooted with Kingroot
Edit 2: I found the original Rom here -> http://pan.baidu.com/s/1o8RgrDS it is a really slow download and you need to download some 3rd part program. I will do it and re-upload it here for you guys! i will edit it later.
And to flash the phone you need this flashtool -> http://pan.baidu.com/s/1nuUqmIt i will download and re-upload it too!
and some other guy said you could use the 2D rom so i prove the link to the download there too. -> http://pan.baidu.com/s/1skUk4Yp
Source: http://bbs.pptv.com/thread-53913-1-1.html&usg=ALkJrhiYylMHy4pCii9K9VlY_V_C3Zi81w
Edit 3: Here is the downloads.
Flash tool -> https://mega.nz/#!mUpThYhD!cg8V8XVZ28szMKmW6CPwmwBBMijLq6rIzl8BE5ZTrLM
3D Rom -> https://mega.nz/#!OMIT2aBI!e_QTjZVFOFvX7a-PUcyb4RXsQ2FPm47E5lbebLcg_AQ
TWRP for King 7s -> https://mega.nz/#!bYwATbgB!NK6xWz8rl4mpjF94diXlTX4xhBnvAF4raFV0QQt_8Fw
I have tried to temporary boot twrp with fastboot but it won't work i guess it is something with my drivers on the pc.... i got it unlocked anyway... i guess thats a small step lol...
Edit 4: Got TWRP installed now! found out what i did wrong.... SP Flash tool didn't recognize my phone... and i was searching for problems and after a while... i tried to turn off the phone, plug it out, press download button in sp flash tool and then plug the phone in... and it worked! i only flashed the recovery so i can install xposed framework!
Bump >.<
@maxkaxx
Good evening
Soon I'll have the PPTV King 7s, like you, I'm happy with your research, I subscribe to your subject
Thank you
:good:
Google Translate
rico69310 said:
@maxkaxx
Good evening
Soon I'll have the PPTV King 7s, like you, I'm happy with your research, I subscribe to your subject
Thank you
:good:
Google Translate
Click to expand...
Click to collapse
Thanks!
I found twrp files too! Will update the thread tomorow and i hope the downloads will be done and uploaded by then !
Ok
:highfive:
Bump, i updated it hope someone could help
Can you take a look on what apps where installed on your device later? because there was some random bloatware/chinese apps on my device after unlocking the device, thanks!
Edit: I can help you to install some custom rom etc to you later
maxkaxx said:
Hello there, I bouth a pptv king 7s and recived it yesterday. I want to install/fastbook TWRP on it so i can pull the original framework from the phone and have a backup. I tried to fastboot the phone with the pptv king 7 TWRP that i found on this forum but it didn't work, i assume its because there is some difference between the 7 and 7s because the 7s has a 3d display.
now my question is. can some of you help me to manage to fastboot the phone so i can pull the original framework from it or does some one else have the original framework? i would like to install TWRP on it later and Xposed Framework.
If i try to install the pptv king 7 framework i will lose all my 3d apps and the 3d wont work and won't be calibrated.
I am willing to try almost everything. And is it possible to install some 3d deep settings like the htc evo 3d (i think?) had.
Thanks.
Edit: the phone is standard rom/firmware and rooted with Kingroot
Edit 2: I found the original Rom here -> http://pan.baidu.com/s/1o8RgrDS it is a really slow download and you need to download some 3rd part program. I will do it and re-upload it here for you guys! i will edit it later.
And to flash the phone you need this flashtool -> http://pan.baidu.com/s/1nuUqmIt i will download and re-upload it too!
and some other guy said you could use the 2D rom so i prove the link to the download there too. -> http://pan.baidu.com/s/1skUk4Yp
Source: http://bbs.pptv.com/thread-53913-1-1.html&usg=ALkJrhiYylMHy4pCii9K9VlY_V_C3Zi81w
Edit 3: Here is the downloads.
Flash tool -> https://mega.nz/#!mUpThYhD!cg8V8XVZ28szMKmW6CPwmwBBMijLq6rIzl8BE5ZTrLM
3D Rom -> https://mega.nz/#!OMIT2aBI!e_QTjZVFOFvX7a-PUcyb4RXsQ2FPm47E5lbebLcg_AQ
TWRP for King 7s -> https://mega.nz/#!bYwATbgB!NK6xWz8rl4mpjF94diXlTX4xhBnvAF4raFV0QQt_8Fw
I have tried to temporary boot twrp with fastboot but it won't work i guess it is something with my drivers on the pc.... i got it unlocked anyway... i guess thats a small step lol...
Edit 4: Got TWRP installed now! found out what i did wrong.... SP Flash tool didn't recognize my phone... and i was searching for problems and after a while... i tried to turn off the phone, plug it out, press download button in sp flash tool and then plug the phone in... and it worked! i only flashed the recovery so i can install xposed framework!
Click to expand...
Click to collapse
This is excellent news, i have been searching for so long for this 7s firmware as i wish to convert my king 7 to a 3d version. They have spares on Banggood lcd screens and full housing, so was going to make this a my new project. Was just missing the firmware. So thank you very much
I also had Trouble flashing through sptool, and thought it was a problem with the mtk drivers as im using win 10, so i decided to flash twrp with flashify instead which worked a treat. Then did the normal flashing Su and Rom through twrp. Never used fastboot method, im quite new to flashing these chinese phones so i'm a bit cautious to try methods that im not to sure about.
I have cm13 on my king 7 now, but wish to convert it to the 3d version once my spares are ordered and are with me. But before i do this, do you think there's a possibility this would work? As the phones have physically the same hardware minus the 3d screen and firmware, so i shouldn't see why i couldn't work.
fleebleflam said:
This is excellent news, i have been searching for so long for this 7s firmware as i wish to convert my king 7 to a 3d version. They have spares on Banggood lcd screens and full housing, so was going to make this a my new project. Was just missing the firmware. So thank you very much
I also had Trouble flashing through sptool, and thought it was a problem with the mtk drivers as im using win 10, so i decided to flash twrp with flashify instead which worked a treat. Then did the normal flashing Su and Rom through twrp. Never used fastboot method, im quite new to flashing these chinese phones so i'm a bit cautious to try methods that im not to sure about.
I have cm13 on my king 7 now, but wish to convert it to the 3d version once my spares are ordered and are with me. But before i do this, do you think there's a possibility this would work? As the phones have physically the same hardware minus the 3d screen and firmware, so i shouldn't see why i couldn't work.
Click to expand...
Click to collapse
Yes, i think it would work, because its the same components except the 3d screen, the framework have a different driver that tells the phone what to do and when
maxkaxx said:
Yes, i think it would work, because its the same components except the 3d screen, the framework have a different driver that tells the phone what to do and when
Click to expand...
Click to collapse
Ok that's good to hear, Thank you for letting me know
fleebleflam said:
Ok that's good to hear, Thank you for letting me know
Click to expand...
Click to collapse
You are welcome
Hey, i have seen this new flyme Rom, that apparently works with the king 7 & maybe the 7s as well. But i'm finding it difficult to translate and get the Rom.
Any help would be welcome
T.i.A..?
http://pan.baidu.com/s/1c2Jv7kG
Hello everyone
It lacks the password, puts the forum link where you got it
Google translate
Edit: Passworrd p9tc
https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/
https://greasyfork.org/en/scripts/7382-baidupandownloadhelper-modify-by-ted423
https://www.youtube.com/watch?v=vwcPGnSxdEA
Hi, i did have the password already, but when i got to the page that i posted, i found out i needed to craete a baidu account, which i don't want to do.
I thank you for the links above, but i think that is just a bit to much for me, i don't want to make a mistake, especially as it's in a different language.
Wish it was a bit more simple than the method in the video. If you could get the Rom and share, i would be very grateful.
---------- Post added at 02:01 AM ---------- Previous post was at 01:38 AM ----------
rico69310 said:
Hello everyone
It lacks the password, puts the forum link where you got it
Google translate
Edit: Passworrd p9tc
https://addons.mozilla.org/en-US/firefox/addon/tampermonkey/
https://greasyfork.org/en/scripts/7382-baidupandownloadhelper-modify-by-ted423
https://www.youtube.com/watch?v=vwcPGnSxdEA
Click to expand...
Click to collapse
Hi, i already had the password, but couldn't grab the file, have it downloading now, but it's taking FOREVER!! lol.
Thank you so much for this invaluable information , very much appreciated
This must be the biggest pain in the A*** download i have done! Twice it has just stopped after getting to around 70% and wont let me carry on, and in between resuming for over an hour! i give up with it, if anyone manages to get this Rom downloaded, then please share. =]
Hello everyone 
 @fleebleflam
Use IDM
https://www.internetdownloadmanager.com/
@fleebleflam
PPTV_KING7_AOSP_16.12.16.zip
https://yadi.sk/d/Iq8t8osY34ThEy
You have Drivers MTP for W10 Pro 64Bit ? :crying:
rico69310 said:
@fleebleflam
PPTV_KING7_AOSP_16.12.16.zip
https://yadi.sk/d/Iq8t8osY34ThEy
You have Drivers MTP for W10 Pro 64Bit ? :crying:
Click to expand...
Click to collapse
Thank you for the links you have provided. I managed to install the flyme Rom, but quickly uninstalled again. Rom insn't optimized for the king 7 and there's no support for the three main buttons For Android (Back, home and menu) its a big shame that most chinese phone manufacturers mainly use apple based os's which really makes me annoyed. I heard there's a patch on a Russian forum for the buttons issue. But i think i will just stick with Cm 13 for now.
What is this zip you have posted? Is this another Rom? If so, is it working ok? Curious to know before flashing...
And i have some mtk drivers installed, but they're not working for me so unable to use sptool to flash any official Roms. Just using Twrp atm which i prefer
If you can link me to some that actually work, i would be grateful.
T.i.A.
Hello 
 @fleebleflam
PPTV_KING7_AOSP_16.12.16.zip Russian forum
Driver Ok
I received my PPTV King 7S, how to check if this is a 7S ?
Google Translate
rico69310 said:
Hello
@fleebleflam
PPTV_KING7_AOSP_16.12.16.zip Russian forum
Driver Ok
I received my PPTV King 7S, how to check if this is a 7S ?
Google Translate
Click to expand...
Click to collapse
Oh dear, it looks like you have a normal King 7 NOT a 7's, if you had a 7's version, you would have a 3D gallery and other 3D software within the phone. Also it states only KING 7 not KING 7s the build number says PP6000(2D) if it was a 7s with 3D it would say PP6000(3D)
I would contact the supplier and demand a refund or a partial refund, did you buy from Gearbest by any chance?? I was speaking to someone on HUKD forums regarding this exact same issue and he received a partial refund of just £20!
I would keep pushing for more, as they have sold you the wrong product which is very misleading. Check AliExpress.com for spares, they have a 3D replacement screen for sale as well as full spare housing to make the switch to a 3D model (If you wanted)
I have yet to find a tear down tutorial to follow before i try this myself
So it isn't a Rom you posted?
@ fleebleflam
Yes I bought it at gearbest, I asked them if it was a King 7S, it answered me Yes
Here is the answer from Our Customer service Team:
"Hello rico,
Please note it's the PPTV King 7S."
Please click here for additional details regarding the item.
We hope that the answer is helpful for you.
If you have any further questions, welcome to submit a ticket to our Support Center
Best Regards
Gearbest Customer Service Team
Click to expand...
Click to collapse
I am very angry :crying:

Hisense a6 (double screen)

Hi,
I just bought from China, Hisense a6 with double screen.
It comes without google play. I have tried to install google play manually without any success.
I have tried with apkmirror, installing manually. I also tried with googleinstaller 2.0 and 3.0. But both method did not give any result.
Is there a way to install googleplay on the device or any international stock rom?
Thanks
wij
be
I also want ot solution of same things. Anyone please help me out.
From what I know it's impossible unfortunately, because Hisense locks down any possibility to install google services.
I think you could use Yalp store to replace google play store. For google play services, I'm not sure it would work, maybe you could use the open-source solution like microG?
Hi,
The problem is not only on google play store, but it is impossible to create google account, for gmail, contact, calendar, etc.
Eventhough, I can install other apps, but without sync all the basic, it is practically unuseable.
Is there any solution for this?
thanks
wij
Hi,
I want to get the A6 too but I am using gmail and calendar so much that it's a no-go for me if I can't install them...
Do you know how they lock the possibilities to install google service? There must be a workaround.
Or do you think using another android image could help? Maybe we can just install the app/drivers needed for the eink?
---------- Post added at 04:13 PM ---------- Previous post was at 03:27 PM ----------
I found some references on Baidu (chinese google) :
can't share them as I have less than 10 post. But if you try "安装google hisense a6" you will find some thread on fan forum of hisense.
Dunno but it looks like it can't be done. Now we must find why and how to bypass it...
PaddleStroke said:
Hi,
I want to get the A6 too but I am using gmail and calendar so much that it's a no-go for me if I can't install them...
Do you know how they lock the possibilities to install google service? There must be a workaround.
Or do you think using another android image could help? Maybe we can just install the app/drivers needed for the eink?
---------- Post added at 04:13 PM ---------- Previous post was at 03:27 PM ----------
I found some references on Baidu (chinese google) :
can't share them as I have less than 10 post. But if you try "安装google hisense a6" you will find some thread on fan forum of hisense.
Dunno but it looks like it can't be done. Now we must find why and how to bypass it...
Click to expand...
Click to collapse
Hi,
I have tried everything with variant of google framework, services, account manager, playstore...
But it does not work....
Very frustating.....
stefing said:
Hi,
I have tried everything with variant of google framework, services, account manager, playstore...
But it does not work....
Very frustating.....
Click to expand...
Click to collapse
If we find how they prevent the app from working then maybe we can find a way to bypass it
Or installing a basic android. But then the eink won't work... Maybe there's a way to get the drivers from current version.
But I am unfortunately no expert of android roms...
Btw can you tell me how the eink screen compare with yotaphone 2 ? Is the resolution better?
PaddleStroke said:
Hi,
I want to get the A6 too but I am using gmail and calendar so much that it's a no-go for me if I can't install them...
Do you know how they lock the possibilities to install google service? There must be a workaround.
Or do you think using another android image could help? Maybe we can just install the app/drivers needed for the eink?
---------- Post added at 04:13 PM ---------- Previous post was at 03:27 PM ----------
I found some references on Baidu (chinese google) :
can't share them as I have less than 10 post. But if you try "安装google hisense a6" you will find some thread on fan forum of hisense.
Dunno but it looks like it can't be done. Now we must find why and how to bypass it...
Click to expand...
Click to collapse
Actually, I've watched posts in some Chinese forums and nobody have ever found a solution for installing google play services on Hisense phones. I think the only way to use google is to wait the release of the "export edition" with google play services, since Hisense basically "locks down" the possibility of installing google play services and rooting. But it seems any of the "export edition" of Hisense has the problem with updating firmware.
PaddleStroke said:
If we find how they prevent the app from working then maybe we can find a way to bypass it
Or installing a basic android. But then the eink won't work... Maybe there's a way to get the drivers from current version.
But I am unfortunately no expert of android roms...
Btw can you tell me how the eink screen compare with yotaphone 2 ? Is the resolution better?
Click to expand...
Click to collapse
It is much better: 720x1440 pixels, and got backlid.
stevenfang1997 said:
Actually, I've watched posts in some Chinese forums and nobody have ever found a solution for installing google play services on Hisense phones. I think the only way to use google is to wait the release of the "export edition" with google play services, since Hisense basically "locks down" the possibility of installing google play services and rooting. But it seems any of the "export edition" of Hisense has the problem with updating firmware.
Click to expand...
Click to collapse
That is a bad news.....
What I think very frustrating is that Hisense advertize their phone at the CES so that everyone know, then they release it only on China without any plan of global release.
Even more annoying they give basically no information about it. I tried contacting them on every possible email but had only a "we currently have no plan for global release".
I mean why would they even care to lock google framework. That does not make sens that the company would try to lock it, I thought it would be the Chinese government that was locking it locally in China. I would be Hisense, on the contrary I would release unofficially a bypass for this google lock to make more sells.
It's just what happenned with the yotaphone 3, it was not available for global customers for a long time, until people got uninterested and that a newer model finally got available. No surprise they are not doing good sells.
here is full bin package for A6, and I'm trying to unzip the bin file. I was wondering if one get to know how to pack the bin file , then you can add magisk/google service app into the boot/system partition and flash it with QPST tool.
link:https://pan.baidu.com/s/1cqwtWLtrAHyXC7rR0EL9IA download code:i7rc
uzip pwd:55925
here is a basic tutorial to walk through the bin file.
https://reverseengineering.stackexchange.com/questions/17262/binwalk-alternative
https://reverseengineering.stackexchange.com/questions/17262/binwalk-alternative
---------- Post added at 04:36 PM ---------- Previous post was at 04:31 PM ----------
PaddleStroke said:
What I think very frustrating is that Hisense advertize their phone at the CES so that everyone know, then they release it only on China without any plan of global release.
Even more annoying they give basically no information about it. I tried contacting them on every possible email but had only a "we currently have no plan for global release".
I mean why would they even care to lock google framework. That does not make sens that the company would try to lock it, I thought it would be the Chinese government that was locking it locally in China. I would be Hisense, on the contrary I would release unofficially a bypass for this google lock to make more sells.
It's just what happenned with the yotaphone 3, it was not available for global customers for a long time, until people got uninterested and that a newer model finally got available. No surprise they are not doing good sells.
Click to expand...
Click to collapse
i guess it's the reason from google inc. Cuz if hisense wants to put gapps into their phones, they must be certified by google, with money and legal stuff. Chinese government has no limitation on the gapps installation. Currently in China most phones made by Xiaomi, Huawei, Vivo/Oppo and of course oneplus have google framework . (but you will need to try to install one google app like maps or youtube to activate it.)
Oh I thought google/youtube was still locked in China.
I just checked and found that you are right, it's google that is preventing the framework from working on uncertified devices since 2017 : https://blog.elcomsoft.com/2018/04/google-services-blocked-on-uncertified-devices/
What is this bin package exactly? What do you mean unzip it? For me bin means binary file, so unzip I guess you mean retroengineering to get back source code? This sound like virtually impossible isn't it? Unless this kind of bin package which structure is similar to every android bin package?
Now that we know what is the issue maybe there's a way around it I'll dig into it.
PaddleStroke said:
Oh I thought google/youtube was still locked in China.
I just checked and found that you are right, it's google that is preventing the framework from working on uncertified devices since 2017 : https://blog.elcomsoft.com/2018/04/google-services-blocked-on-uncertified-devices/
What is this bin package exactly? What do you mean unzip it? For me bin means binary file, so unzip I guess you mean retroengineering to get back source code? This sound like virtually impossible isn't it? Unless this kind of bin package which structure is similar to every android bin package?
Now that we know what is the issue maybe there's a way around it I'll dig into it.
Click to expand...
Click to collapse
yes google & youtube and many other sites are still locked in China, but you can use one VPN to bypass the block. It is possible to examine the bin structure, just see the link i posted above-using the tools provided in that link. I tried to look into it, but I don't koow which part is the boot partition. However, most part of the bin file are self-explainable. For example, the binwalk gives the offset of different android system file in the bin file. You can just extract a file with the offset address from the bin file.
Thanks,
Can you tell me more about this bin file? Where did you got it and what it is exactly? (I think I miss some basic understanding on how the android roms are made.)
What it should include and so on.
---------- Post added at 12:21 PM ---------- Previous post was at 11:52 AM ----------
Have you tried to do this btw?
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
PaddleStroke said:
Thanks,
Can you tell me more about this bin file? Where did you got it and what it is exactly? (I think I miss some basic understanding on how the android roms are made.)
What it should include and so on.
---------- Post added at 12:21 PM ---------- Previous post was at 11:52 AM ----------
Have you tried to do this btw?
https://www.xda-developers.com/how-to-fix-device-not-certified-by-google-error/
Click to expand...
Click to collapse
the bin file and its related info can be figured out through this post: https://forum.xda-developers.com/showpost.php?p=78724090&postcount=12 , using the binwalk utility on a linux system
the not certified by google error is not related to hisense a6, as a6 itself cannot install google framework, let alone the error (which only exists when you have the framework on the phone)
a hisense engineer told me that they plan to sell a6 outside China, and they have a gapps ROM version for it. You can mail your phone to them and request them to flash that custom ROM into your phone (for free).
Thanks for the info!
Not sure to understand correctly, you need to mail physically the phone to them in China? Then they send it back to you? Or send them your phone number? But then I don't see how that would help them flashing the ROM.
Have you done it already ?
If you can pm me the engineer contact to get the room? I tried to contact hisense on various email but got no usefully reply so far.
PS: so I guess global version will be same hardware right? Not like yotaphone2 ? Cause I got the Chinese yoga version which gave me lot of bugs even with global ROM.
PaddleStroke said:
Thanks for the info!
Not sure to understand correctly, you need to mail physically the phone to them in China? Then they send it back to you? Or send them your phone number? But then I don't see how that would help them flashing the ROM.
Have you done it already ?
If you can pm me the engineer contact to get the room? I tried to contact hisense on various email but got no usefully reply so far.
PS: so I guess global version will be same hardware right? Not like yotaphone2 ? Cause I got the Chinese yoga version which gave me lot of bugs even with global ROM.
Click to expand...
Click to collapse
yes, he told me to physically send the phone to them and they will flash a beta version google-rom into it. I will not do that as I've sold my a6 already.
I can ask for his permission whether to share the ROM info after the Chinese new yr.
knljz said:
yes, he told me to physically send the phone to them and they will flash a beta version google-rom into it. I will not do that as I've sold my a6 already.
I can ask for his permission whether to share the ROM info after the Chinese new yr.
Click to expand...
Click to collapse
Can i know why you sold it? Was it because you were not satisfied and if so by what problem?
Buying it from China to France, then send it back from france to china for in the end have it back from China sounds like a lot of shipping...
If you can send me his name or email or wechat or anything then perhaps I can discuss with him
But as you say with CNY he probably won't reply.
A reseller in China told me Hisense planed to release global version after CNY, within 50 days from now. But not sure if his info was correct.

Categories

Resources