Related
i rooted my phone yesterday and every thing went perfect but now today it wont boot it just flashes lg logo then flashes again with lg logo then says security error. can anyone please help
Dsmforlife92 said:
i rooted my phone yesterday and every thing went perfect but now today it wont boot it just flashes lg logo then flashes again with lg logo then says security error. can anyone please help
Click to expand...
Click to collapse
did you unlock too?
edit: did u do a backup after rooting? can you get to recovery?
jimi_pooh said:
did you unlock too?
edit: did u do a backup after rooting? can you get to recovery?
Click to expand...
Click to collapse
just installed root not unlocked how do you get stock
recovery
anyone please
anyone please i can get in reset screen and download mode
Dsmforlife92 said:
anyone please i can get in reset screen and download mode
Click to expand...
Click to collapse
normally its up volume and power when the phone is off that should get you to the bootloader but not sure if you can get there if not unlocked check out carretts thread on rooting and unlocking
jimi_pooh said:
normally its up volume and power when the phone is off that should get you to the bootloader but not sure if you can get there if not unlocked check out carretts thread on rooting and unlocking
Click to expand...
Click to collapse
i got into download mode what can i do next
Your bootloader is locked. You'll have to LGNPST.
There instructions here:
http://forum.xda-developers.com/showthread.php?t=2006946
Be sure to follow all the steps.
Dsmforlife92 said:
i got into download mode what can i do next
Click to expand...
Click to collapse
dude you might have to do the following
Alternatively, you can use LGNPST to restore a factory image. You need to obtain the following files: LGNPST-PhantomPhreak53.zip, LGNPST_ACG_2.2.3_Lab.zip, and LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip. Follow the following steps (please note: I am less experienced with this process and find it much more tedious. Also, IMHO, I don't think the people you're returning the phone to will care if you leave some minor traces of your unlocking shenanigans. I think the process above this is more than sufficient and simpler). Credits go to Jhoopes517 for this process, he showed me how to do it in his thread.
(Install LG USB drivers)
Extract LGNPST_ACG_2.2.3_Lab.zip, run the installer. Open file explorer to C:\Program Files\LG Electronics\LGNPST and replace the current LGNPST_ACG.exe with the one in the extracted folder (if you are on a 64-bit version of windows, go to C:\Program Files (x86)\LG Electronics\LGNPST)
Extract LGNPST-PhantomPhreak53.zip and run LGNPST_GenericModels_Ver_5_0_12_0.exe and then run LGNPST_Components_Ver_5_0_20_0.exe
In file exlorer, navigate to C:\LG Electronics\LGNPST and copy over the "Models" folder from the extracted Phantom zip folder
Run cmd as administrator and execute the following
Code:
regsvr32 "C:\LG Electronics\LGNPST\Models\LGNPST_LS970.dll"
Extract LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip and change the extension of the .tot file to .bin
Connect phone to computer, power off, and then power on, holding down the power button and both volume buttons
Run the newly replaced LGNPST_ACG.exe from step 2. Select the DLL from step 5 and the .bin from step 6.
Press Start
If LGNPST errors out at 85%, turn your phone off and hold the power button until the phone powers on, then release. DO NOT disconnect the cable before LGNPST is done doing its thing. Your phone may reboot. This is OK.
jimi_pooh said:
dude you might have to do the following
Alternatively, you can use LGNPST to restore a factory image. You need to obtain the following files: LGNPST-PhantomPhreak53.zip, LGNPST_ACG_2.2.3_Lab.zip, and LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip. Follow the following steps (please note: I am less experienced with this process and find it much more tedious. Also, IMHO, I don't think the people you're returning the phone to will care if you leave some minor traces of your unlocking shenanigans. I think the process above this is more than sufficient and simpler). Credits go to Jhoopes517 for this process, he showed me how to do it in his thread.
(Install LG USB drivers)
Extract LGNPST_ACG_2.2.3_Lab.zip, run the installer. Open file explorer to C:\Program Files\LG Electronics\LGNPST and replace the current LGNPST_ACG.exe with the one in the extracted folder (if you are on a 64-bit version of windows, go to C:\Program Files (x86)\LG Electronics\LGNPST)
Extract LGNPST-PhantomPhreak53.zip and run LGNPST_GenericModels_Ver_5_0_12_0.exe and then run LGNPST_Components_Ver_5_0_20_0.exe
In file exlorer, navigate to C:\LG Electronics\LGNPST and copy over the "Models" folder from the extracted Phantom zip folder
Run cmd as administrator and execute the following
Code:
regsvr32 "C:\LG Electronics\LGNPST\Models\LGNPST_LS970.dll"
Extract LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip and change the extension of the .tot file to .bin
Connect phone to computer, power off, and then power on, holding down the power button and both volume buttons
Run the newly replaced LGNPST_ACG.exe from step 2. Select the DLL from step 5 and the .bin from step 6.
Press Start
If LGNPST errors out at 85%, turn your phone off and hold the power button until the phone powers on, then release. DO NOT disconnect the cable before LGNPST is done doing its thing. Your phone may reboot. This is OK.
Click to expand...
Click to collapse
i tried to get the phantom files in irc but no one ever replies to me
Dsmforlife92 said:
i tried to get the phantom files in irc but no one ever replies to me
Click to expand...
Click to collapse
ive never had to go back to stock sorry.
You can also buy the freegie app at Google Play for $1. It will install your choice of CWM or TWRP recovery for you.
Pony Express said:
You can also buy the freegie app at Google Play for $1. It will install your choice of CWM or TWRP recovery for you.
Click to expand...
Click to collapse
My phone wont boot only goes into download mode
Sent from my GT-N8013 using xda premium
Since you can get to download mode. You can run the lgpnst go to The channel name is #lg-optimus-g when you go to http://webchat.freenode.net and log in once you do Then type "!info lgpnst" and they will help
Sent from my Optimus G
REDFOCZ said:
Since you can get to download mode. You can run the lgpnst go to The channel name is #lg-optimus-g when you go to http://webchat.freenode.net and log in once you do Then type "!info lgpnst" and they will help
Sent from my Optimus G
Click to expand...
Click to collapse
Yea i did just waiting for a response im wondering why it did this it was running great then all of the sudden it turned off i did freeze two apps to stop ota updates maybe that caused issue
Sent from my Galaxy Nexus using xda premium
Yeah that odd it happened after the fact, I ran into the issue while rooting didn't have it in MTP mode and had to go into download mode to fix it. Did you flash any mod packs or roms after rooting and unlocking
Sent from my Optimus G
REDFOCZ said:
Yeah that odd it happened after the fact, I ran into the issue while rooting didn't have it in MTP mode and had to go into download mode to fix it. Did you flash any mod packs or roms after rooting and unlocking
Sent from my Optimus G
Click to expand...
Click to collapse
No nothing just rooted the phone and froze those 2 apps
Sent from my Galaxy Nexus using xda premium
I wish I could be of more help, but I don't know what would be causing this. Good luck though.
Sent from my Optimus G
REDFOCZ said:
I wish I could be of more help, but I don't know what would be causing this. Good luck though.
Sent from my Optimus G
Click to expand...
Click to collapse
Thanks still no luck with the files no one is answering me
Sent from my Galaxy Nexus using xda premium
Sent you a pm with the link to the file from the IRC, please no not post on the open forum
Sent from my Optimus G
xda premium
For some reason my Rooted P769BK got stuck at the splash screen and wouldn't move pass the T-Mobile Android logo. I figured I should hold down the volume down and restart to see if it can go to stock recovery. Little did I know, it seems to have done some kind of Factory Reset.
Now it seems to be stuck. I was able to check my apps through the Settings Menu and found that I didn't move or delete the LG Setup Wizard apk or odex. I just moved all the other T-Mobile bloatware to my SD card.
I have been looking around and even tried to run the KDZ for 10G, but the app force closes on my Windows 7 machine right after it unpacks 10G.
I'm using the T-Mobile USA L9 on V10E. Any help would be greatly appreciated.
Hi, I had the same problem with KDZ on Windows 7 (Ultimate 64bit), when I run flash it falled down. Then I flashed KDZ with virtual Windows XP. Program for virtual PC is VMware workstation, here you create new virtual PC and install system which you want I hope that it will help you
Thanks for the insight. I'll give that a shot when I get home tonight. Any suggestions on how to keep 10E instead of upgrading to 10G?
Sent from my HTC Sensation 4G using xda app-developers app
I found this...it's USA T-Mobile FW for P769, I don't know if it's your.
http://uploaded.net/file/6fvwyi7p/from/wihfvm
or you can try search on google for file: V10E_00.kdz P769 (that 00 I don't know if you have too, but on my P760 it has that numbers)
Before I go ahead and try that 10E file, how did you find out it was for the P769 T-Mobile USA variant?
Sent from my HTC Sensation 4G using xda app-developers app
I found it here http://uploaded.net/f/wihfvm
And I definitely know that it's firmware for your phone, here you can find the same link which I wrote http://forum.xda-developers.com/showthread.php?t=2107971
deleted by user
and what is different in BK and AT ?
from page in previous post:
P769/P769BK
P769 KDZ
CANADA WIND MOBILE V11A (working as per this post )
P769
TMOBILE V10G (visit this post, and say thanks to rbraswell8, Do not flash. Read P769V10G WARNING below)
TMOBILE V10E to V10G (Small Update Only 24MB) visit this post for info and file.
TMOBILE V10E Full 477.96mb
Click to expand...
Click to collapse
here is wrote P769/P769BK and for BK version I can't see any different link, only for Canada, but it's not T-Mobile version.
deleted by user
Thanks for the find. I could of sworn 10E wasn't there yesterday.
Sent from my HTC Sensation 4G using xda app-developers app
the 10 e dl link
the link for the v10e file is both horrendously slow, and links to a zip which does not contain a kdz file!!! Unless theres a way to turn that file into a kdz file it should not be counted as one.
Now that you mentioned that. It seems to look like the source code that I ran into yesterday. Still waiting on the download.
Sent from my HTC Sensation 4G using xda app-developers app
I didn't know that it's only source code, I thoght that in ZIP is KDZ file. Now I'm trying to download it, really speed is very slow
I found on google this page http://code.google.com/p/arenoid/wiki/KDZExtractPack it's about extracting KDZ and generating new, maybe it will works.
If it works it's maybe way how to make rooted new firmwares.
Now I downloaded that ZIP, and inside are BIN and FLS file, I don't know what is FLS, but BIN you could flash..I found this..try it
http://forum.xda-developers.com/showthread.php?t=1355470
Do you think I can use Fastboot to flash the zip?
Sent from my Galaxy Nexus using xda app-developers app
WRONG LOCATION: THIS IS DEVELOPMENT SECTION AND YOUR POST IS NOT ANY DEVELOPMENT. PLEASE REFRAIN YOURSELF FROM POSTING HERE. REPORTED TO ADMINS. ALL PALS ARE REQUESTED NOT TO POST YOUR ISSUES IN DEV SECTION.
You should post this in Optimus L9 P760, P765, P768, P769 Q&A, Help & Troubleshooting section
Now reply to your issue!
If everything fails, you may just give a try to LG PC Suite.
Whatever the issue is, for any device any firmware there is an option called "EMERGENCY FIRMWARE RECOVERY" in menu of "LG PC SUITE" I did this recovery once when my phone got bootloops and thoough its semi-bricked. But you should be able to bring phone in SW Upgrade Mode. It seems does not do check current ROM at all and FLASHES a fresh latest ROM downloading from LG Server, applicable for your specific phone.
EDIT: Wanna attach screenshot but cannot because XDA is showing overcapacity.
Thanks for the reminder.
Anyways, I figured it out. The phone did reset itself somehow. But, I'm not stuck at the Setup Wizard anymore.
Sent from my Galaxy Nexus using xda app-developers app
Bump... Did we ever figure out how to flash the BIN and FLS files to the phone? This is V10E, and IS rootable with Bin4ry method. AND according to other rumors, bootloader unlock via oem-unlock should also work.
Or how to recompile these files back into the KDZ would work also.... I also have the DLL file for this as well
Now we have Unlocked L9 (P760 and P765), is there any method we can flash only Baseband? SmartFlash Tool is not working because it does not recognize phone while flashing. It seems model.dll file only recognizes P990 (O2x) and not P760 or P765.
I tried replacing the DLL file with P765.dll found while extracting KDZ but its not working.
I am told long time back that Fastboot can flash Baseband separately but I dont know the syntax to flash Baseband FLS files of LG.
Can anyone pay attention to this problem. If anyone here knows more about fastboot, then it will be possible to flash baseband and also the ROM image.
Anyone?
HELP!! How to flash baseband versions?
albertwesquer said:
HELP!! How to flash baseband versions?
Click to expand...
Click to collapse
You need to flash kdz to change baseband. Use LG tool or offline flash method. Install ROM don't change your baseband and for what I know, you cannot flash baseband with fastboot because you cannot find radio file for your phone (.fls don't work with fastboot).
artit said:
You need to flash kdz to change baseband. Use LG tool or offline flash method. Install ROM don't change your baseband and for what I know, you cannot flash baseband with fastboot because you cannot find radio file for your phone (.fls don't work with fastboot).
Click to expand...
Click to collapse
AntonX managed to flash radio only http://forum.xda-developers.com/showpost.php?p=44754138&postcount=2
I extracted one .fls file from v20H europe kdz using this tool and I tried to edit antonx updater script but I don't understand why there are 4 .fls files in his package.
PreemPalver said:
AntonX managed to flash radio only http://forum.xda-developers.com/showpost.php?p=44754138&postcount=2
I extracted one .fls file from v20H europe kdz using this tool and I tried to edit antonx updater script but I don't understand why there are 4 .fls files in his package.
Click to expand...
Click to collapse
I don't know why there're 4 files in radio update but kdz extractor got only one file. In some P769 thread said that they get baseband file from OTA temporary folder. I'm not sure. This is that thread http://forum.xda-developers.com/showthread.php?t=2251622&page=3
Well flashing with smartflashtool worked fine for me... Maybe I ll have to take a look again, which version I used. But my baseband got flashed fine, only the .bin file is refusing
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Well flashing with smartflashtool worked fine for me... Maybe I ll have to take a look again, which version I used. But my baseband got flashed fine, only the .bin file is refusing
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Did you follow this guide? http://forum.xda-developers.com/showthread.php?t=1448803
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
N00BY0815 said:
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
Click to expand...
Click to collapse
Anyway I made this radio updating zip for P760. I didn't test it yet because I don't have a windows xp pc at the moment to flash factory image if something goes wrong. Maybe it works.
Update: doesn't work, it need 4 files...
N00BY0815 said:
Well not really... I used that tool sooo many times already for my old Optimus Black, that I didnt need that guide. Try different versions of SFT (the one for the OB, the one for the 3D and I think I got another one made by xonar_, but I need to look for it...) and it should work with no problem. But just flash the fls file. I also dont remember in which box I put it, since it shouldnt make any difference. Just go ahead and try it
Click to expand...
Click to collapse
I finally managed to update my p760 baseband using SFT.
Thing is procedure went fine, it showed download complete and my phone rebooted but baseband version didn't change. I'm on v20h (installed through flashable zip) and it shows me 01.1230.0 same as before although I extracted baseband files from v20h kdz. Besides procedure didn't wipe the phone as I think it should.
Any clue?
PreemPalver said:
I finally managed to update my p760 baseband using SFT.
Thing is procedure went fine, it showed download complete and my phone rebooted but baseband version didn't change. I'm on v20h (installed through flashable zip) and it shows me 01.1230.0 same as before although I extracted baseband files from v20h kdz. Besides procedure didn't wipe the phone as I think it should.
Any clue?
Click to expand...
Click to collapse
SFT doesnt wipe your phone. So it all should be fine. Which version of SFT did you use? A link maybe? Try to flash an ICS baseband and check if anything changes.
N00BY0815 said:
SFT doesnt wipe your phone. So it all should be fine. Which version of SFT did you use? A link maybe? Try to flash an ICS baseband and check if anything changes.
Click to expand...
Click to collapse
I've used this one for the optimus black since the one for the optimus 2x failed every time.
Yeah this is the one I got too and tried to flash cp and ap files for the p769 but I got a "magic number does not match" error. This would be a great tool for this phone if it would. Work
LG-P769 rooted, debloated, over clocked, under volted, and linked. 'Tis the season to give thanks so hit the button already!
Nathan.7118391 said:
Yeah this is the one I got too and tried to flash cp and ap files for the p769 but I got a "magic number does not match" error. This would be a great tool for this phone if it would. Work
LG-P769 rooted, debloated, over clocked, under volted, and linked. 'Tis the season to give thanks so hit the button already!
Click to expand...
Click to collapse
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
N00BY0815 said:
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
N00BY can you please tell me your baseband version and which kdz did you use to obtain it?
I flashed v20h baseband through SFT and I have now L6260_MODEM_SIC_01.1230.00 which is the one that I already had.
N00BY0815 said:
Ok again, since you dont seem to get it. You can OBLY FLASH THE .fls FILE! This is the baseband. You can NOT flash a complete ROM.
Sent from my LG-P760 using xda app-developers app
Click to expand...
Click to collapse
Dude are you mental or just don't understand English very well? This is the last time I'm going to explain this to you. . . If you had any sense at all you would click the link that he is referring to and READ THE WHOLE Thing! I linked the very same one. Find someone that can read it to you if needed.
LG-P769 rooted, debloated, over clocked, under volted, and linked2sd. 'Tis the season to give thanks so hit the button already!
PreemPalver said:
N00BY can you please tell me your baseband version and which kdz did you use to obtain it?
I flashed v20h baseband through SFT and I have now L6260_MODEM_SIC_01.1230.00 which is the one that I already had.
Click to expand...
Click to collapse
I got:
LGP760AT-00-V20h-EUR-XXX-JUL-12-2013
@Nathan.7118391 Then why do you write over again, that you tried to flash CP and AP files? I explicitly said a few times only flash the .fls nothing else. I followed your thread. I am not really sure, if it really flashes the complete baseband. xonar_ once had a closer look at the process and it seemed to be rather complicated. that's why I doubt, that it flashes the same, as a kdz flashes. That's it for now, I ll not respond to posts here anymore...
Got an optimus g off CL. The guy didnt tell me he converted it to mako (thats what it says on fastboot screen) I am trying to get it into recovery mode after I flashed a non mako rom on it. It won't work. So I figured I would lgnpst it. That wont recognize the phone. I'm on windows 8. Is there a special way I have to enter recovery now that it was converted to mako?
pieman13 said:
Got an optimus g off CL. The guy didnt tell me he converted it to mako (thats what it says on fastboot screen) I am trying to get it into recovery mode after I flashed a non mako rom on it. It won't work. So I figured I would lgnpst it. That wont recognize the phone. I'm on windows 8. Is there a special way I have to enter recovery now that it was converted to mako?
Click to expand...
Click to collapse
Install Proper Drivers And Try To Boot In Download Mode And Usr LGNPST To Flash Stock .tot File.
Teenybins Are Excellent To Recover From A Softbrick,But If You Are Using A N4 Converted G Then You Will Have To Restock First.
Regards,
acervenky,
XPT
If your boot loader is unlocked it will say mako, doesn't have to be converted to say that. Which splash screen did it have when it first boots? If it shows LG for a second or so it is not converted. You may just not have updated rpm/tz partitions needed for 4.2 ROMs. Also lgnpst won't work with USB 3.0 for some reason, and your phone needs to be in download mode for lgnpst to work.
Thanks for the fast reply guys. It was on a usb 3. Got back into cwm and restored it. Will attempt to flash the ota firmware but LGNPST can find the .dll file. I have no idea where it is.
pieman13 said:
Thanks for the fast reply guys. It was on a usb 3. Got back into cwm and restored it. Will attempt to flash the ota firmware but LGNPST can find the .dll file. I have no idea where it is.
Click to expand...
Click to collapse
If you use tSilenzio's automated lgnpst it registers DLL for you, it will say ls970 but it works fine for e970, click on the little folder icon in lgnpst.
Edit...is your phone converted?
No it is def not converted. Thanks again guys!
pieman13 said:
No it is def not converted. Thanks again guys!
Click to expand...
Click to collapse
If you are certain it is not converted then you can use teenybin file with lgnpst. It updates your partition and installs twrp. You would just need to flash your rom afterwards and be done.http://forum.xda-developers.com/showthread.php?t=2230994
pieman13 said:
No it is def not converted. Thanks again guys!
Click to expand...
Click to collapse
Be Sure With It.Because If You Flash Teenybins On A N4 Converted Phone,It Will Hard Brick [Only Way To Recover Is Jtag]
Regards,
acervenky,
XPT
adfurgerson said:
If you are certain it is not converted then you can use teenybin file with lgnpst. It updates your partition and installs twrp. You would just need to flash your rom afterwards and be done.http://forum.xda-developers.com/showthread.php?t=2230994
Click to expand...
Click to collapse
Tried that and it says path not found. assuming its talking about the dll as I had the teenybin loaded.
pieman13 said:
Tried that and it says path not found. assuming its talking about the dll as I had the teenybin loaded.
Click to expand...
Click to collapse
Not sure what would cause that error. Automated lgnpst wasn't out when I installed it on my laptop, and teenybin wasn't out when I updated to 20j. I always selected dll first then bin. You may want to ask for help in the irc channel http://webchat.freenode.net/?channels=lg-optimus-g
got the dll but now it's giving me some error. something about version number 501 or 503...I'll get back on it tomorow.
pieman13 said:
got the dll but now it's giving me some error. something about version number 501 or 503...I'll get back on it tomorow.
Click to expand...
Click to collapse
Added link to irc channel in previous post.
Good to go now. Got it working. Now I just need to find the right rom to use with my tmobile sim. Thanks again!
Alright so I recently got the lg k7 from metro pcs and decided to root it. I rooted it using kingroot and then used supersu me so that I could install supersu instead of the one used for kingroot. It worked and then asked me to reboot my phone but when it started up again, it just stayed frozen on the metro pcs logo! I removed the battery and went into recovery mode, (by clicking the down volume+power button) but when it starts up again, it still stays stuck on the metro logo. Im assuming it is stuck on a bootloop? I also believe it is soft brick because i can still access the download mode, although it did take a while as i had to find the dang drivers b/c my computer would not recognize it.
I tried using the LG Mobile Support Tool to try to unbrick it, but it says that it already has the latest firmware installed! I cant do an update recovery either!
Sadly the 7 day exchange and return has ended and I cannot replace it, so is there any other way that anyone knows to unbrick the phone?
Thanks
Did you ever figure this out? I had my k7 goto a secure boot error 9 and cant figure it out.
Sent from my LGMS330 using XDA-Developers mobile app
The only way to fix our LG devices...including @Goongydin device
1. downloada kdz firmware file for our respective model & carrier
2. download lg flashtool & another tool on a windows PC
3. put the device in download mode
4. reflash the firmware(Stock)
check out my tutorial here if the firmware file for the LG K7 is ever released...http://forum.xda-developers.com/android/development/how-to-universally-manually-update-lg-t3280735
HOWEVER the LG K7 firmware file has NOT been released yet & LG wont release if ask...I asked once & they told me they do NOT make it & then I ask another time(different lg representative) She said that file is proprietary & so it can NOT be released to anyone outside of LG...
so I have multiple responses that conflicts with one another especially when the first conversation was with an LG developer...who ACTUALLY makes those files apparently, but inclined that he does NOT.
Xstar410 said:
The only way to fix our LG devices...including @Goongydin device
1. downloada kdz firmware file for our respective model & carrier
2. download lg flashtool & another tool on a windows PC
3. put the device in download mode
4. reflash the firmware(Stock)
check out my tutorial here if the firmware file for the LG K7 is ever released...http://forum.xda-developers.com/android/development/how-to-universally-manually-update-lg-t3280735
HOWEVER the LG K7 firmware file has NOT been released yet & LG wont release if ask...I asked once & they told me they do NOT make it & then I ask another time(different lg representative) She said that file is proprietary & so it can NOT be released to anyone outside of LG...
so I have multiple responses that conflicts with one another especially when the first conversation was with an LG developer...who ACTUALLY makes those files apparently, but inclined that he does NOT.
Click to expand...
Click to collapse
if you have a working one that boots, I can make firmware for it, and share to everyone that needs, I have one myself that doesn't boot
thatotherguy.. said:
if you have a working one that boots, I can make firmware for it, and share to everyone that needs, I have one myself that doesn't boot
Click to expand...
Click to collapse
my phone is still bricked...pretty sure it was really clear I have not fixed my phone yet nor have any files meantion yet...but i am searching far & wide..
(team rocket reference goes here)
Well if anyone has working on and will to make firmware from your phone please contact me
Sent from my SM-G935T using Tapatalk
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
thatotherguy.. said:
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
Click to expand...
Click to collapse
Whats that I smell? Hope for my soft bricked K7??? Many many thanks!
Goongydin said:
Whats that I smell? Hope for my soft bricked K7??? Many many thanks!
Click to expand...
Click to collapse
yes it should just flash it, it worked on mine
thatotherguy.. said:
yes it should just flash it, it worked on mine
Click to expand...
Click to collapse
Which dll do i use when i goto flash? I only have ocassional access to a pc so i want to have all the files on my phone ready to go.
Goongydin said:
Which dll do i use when i goto flash? I only have ocassional access to a pc so i want to have all the files on my phone ready to go.
Click to expand...
Click to collapse
I'm not sure I flashed with a program thats isn't allow to say on here
thatotherguy.. said:
I'm not sure I flashed with a program thats isn't allow to say on here
Click to expand...
Click to collapse
Oh. I wonder if a generic dll would work. Any chance youd be willing to pm me? Thanks for your work again.
thatotherguy.. said:
here you guys go I made stock tot.
Click to expand...
Click to collapse
Wow that is amazing! For the sake of educating, would you mind sharing how you made a tot file (or a link describing the process). I have been trying to make a kdz or tot for like the past week and have just been going in circles.
I have the T-Mobile variant of the K7 (LGK330BK. Is this tot carrier specific? All I need is to get back into TWRP to restore my back up or restore my system.img.
thatotherguy.. said:
yes it should just flash it, it worked on mine
Click to expand...
Click to collapse
You don't need to link to a download or anything, but could you please tell us the name of the name of the DLL you used?
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Sent from my SM-G935T using Tapatalk
thatotherguy.. said:
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Click to expand...
Click to collapse
Anyone try the LGUP method? If so did it restore your phone using the tot above?
ledzepman71 said:
Wow that is amazing! For the sake of educating, would you mind sharing how you made a tot file (or a link describing the process). I have been trying to make a kdz or tot for like the past week and have just been going in circles.
I have the T-Mobile variant of the K7 (LGK330BK. Is this tot carrier specific? All I need is to get back into TWRP to restore my back up or restore my system .img.
Click to expand...
Click to collapse
http://forum.xda-developers.com/lg-g-stylo/how-to/official-boost-lg-g-stylo-unbrick-guide-t3215198
If you have already fixed your phone disregard but keep this handy. It works. On the lg ls770 which has a locked bootloader and is very finiky. I have a booting and a non booting k7 and trying to find a system.img or how to extract the system.img from the phone. All i find is how to extract img from firmware. If you could share the system.img it would be appreciated
---------- Post added at 11:17 PM ---------- Previous post was at 11:16 PM ----------
thatotherguy.. said:
I didn't use a DLL file, my program doesn't need it, you can try LGUP
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
Can you p.m. Me the name of the program please
thatotherguy.. said:
here you guys go I made stock tot https://drive.google.com/open?id=0By73pguuHS8mSTZJQVkwekVTanM
Click to expand...
Click to collapse
How can I use this to I brick my k7? What program do I use to flash the tot file? If you can't say it could you please PM me it? Thanks
Can someone with a working K7 please post the output of these commands in adb
Code:
ls -al /dev/block/platform/*/by-name
and
Code:
cat /proc/partitions
Thanks
That recovery app
Could you also PLEASE PM me that program you used to fix your phone as well!!??
Thanks
kw69747 said:
http://forum.xda-developers.com/lg-g-stylo/how-to/official-boost-lg-g-stylo-unbrick-guide-t3215198
If you have already fixed your phone disregard but keep this handy. It works. On the lg ls770 which has a locked bootloader and is very finiky. I have a booting and a non booting k7 and trying to find a system.img or how to extract the system.img from the phone. All i find is how to extract img from firmware. If you could share the system.img it would be appreciated
---------- Post added at 11:17 PM ---------- Previous post was at 11:16 PM ----------
Can you p.m. Me the name of the program please
Click to expand...
Click to collapse