hi everyone,
when i try install experience v2.0 to my xperia u, it gives bootloop and don't starting syste. phone gives red light on illumination bar when starting, i tried stock .54 ftf with fastboot,
i can reach cwm menu, i can connect phone fastboot mode
thanks for helps, greetings
Explain the process you used to flash the Rom so I can try and see where the problem is
And is your bootloader locked or unlocked
Sent from my LT22i using xda premium
i have unlocked bootloader, now experience v2.0 rom
What did you do to flash the Rom and what kernel are you using
Sent from my LT22i using xda premium
First you have to flash cm9 than expirience v2
Sent from my Xperia U using Tapatalk HD
Kutukcu said:
hi everyone,
when i try install experience v2.0 to my xperia u, it gives bootloop and don't starting syste. phone gives red light on illumination bar when starting, i tried stock .54 ftf with fastboot,
i can reach cwm menu, i can connect phone fastboot mode
thanks for helps, greetings
Click to expand...
Click to collapse
Flash any Stock B.1.54 or C.1.0 (use flashtool).
Let it boot properly.
Download eXperience.zip and transfer to internal memory.
Now flash Munjenis's CWM kernel
How to flash?
Download fastboot package and extract it.
Download Memory Tweak.zip and extract it.
Copy ftr file from memory tweak and Place ftr to fastboot folder.
While device is power OFF:
Volume Up + USB cable connected to PC -> FASTBOOT MODE (BLUE LED will light up)
Open Command Prompt (Shift+Right mouse button) in Fastboot Folder
Write this commend and hit enter fastboot flash boot ftr
Done
thanks for helps everybody, but my phone does'nt stay in flash mode, after 20-30 seconds of green light, disconnecting
so i can't use flashtool
i have solved all problems, thanks for everything
Related
THREAD OVERVIEW
Post 1 : ROMS FOR XPERIA MINI
Post 2 : ROMS FOR XPERIA MINI PRO
Post 3 : ROMS FOR XPERIA LIVE WITH WALKMAN
Post 4 : ROMS FOR XPERIA ACTIVE
Post 5 : COMMON ROMS
Post 5 : CUSTOM KERNEL
Post 6 : BRICKIG AND SOLUTION
Post 7 : CUSTOMIZATION
NOTE :
you can port any rom from other devices because XMP, XM and LWW brothers. and that is why we are in theard the same. porting means just, replace a few files. So you can do it Replace the hw_config, sensors.conf, copy smultron touch hex firmware file /etc_firmware/ and DELETE mango hex's, and edit the build prop /just replace all sk17 and mango or mini pro lines/. And this is all. Flash the mini kernel and install the rom.but for XMP, you must replace the "usr" to the physical keyboard and some file for the adjustment.
thanks to kamarush
BEFORE WE START THERE ARE SOME REQUIRMENTS TO FLASH A ROM AND KERNEL SUCH AS..
{1}.YOUR Bootloader MUST BE unlocked.I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
THERE ARE TWO WAYS OR METHODS OF UNLOCKING BOOTLOADER...
(1).OFFICIAL WAY:http://unlockbootloader.sonyericsson.com/
(2).TEST POINT METHOD:http://forum.xda-developers.com/showthread.php?t=1285285
YOU WILL VOID YOUR WARRENTY IF YOU UNLOCK YOUR BOOTLOADER...
....YOU CAN FIND MORE INFORMATION ABOUT UNLOCKING BOOTLOADER ON ABOVE LINKS....
{2}.YOU MUST BE ROOTED AND HAVE CMW(ClockWorkMode) INSTALL ON YOUR PHONE
HOW TO FLASH CMW IS GIVEN HERE:http://forum.xda-developers.com/showthread.php?t=1345741
BEST WAY TO HAVE ROOT AND CMW IS TO FLASH CUSTOM KERNEL.
IF YOU HAVE ABOVE THINGS THEN YOU ARE READY TO GO...
...TO FLASH CUSTOM KARNEL YOU WILL NEED FLASTOOL:http://forum.xda-developers.com/showthread.php?t=1351309....
POST 1
ROMS FOR XPERIA MINI
1.MiniCMSandwich AOSP Android 4.0.3 RC2:http://forum.xda-developers.com/showthread.php?t=1434001
2.Flush78_v6S:http://forum.xda-developers.com/showthread.php?t=1423058
3.Clean 'n' Tweaked - v4.1:http://forum.xda-developers.com/showthread.php?t=1417621
4.ST15i (Mini) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439293
POST 2
ROMS FOR XPERIA MINI PRO
1.NeroDroid ROM v5:http://forum.xda-developers.com/showthread.php?t=1458963
2.Lewa OS:http://forum.xda-developers.com/showthread.php?t=1462678
3.SK17i (Mini Pro) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439298
POST 3
ROMS FOR XPERIA LIVE WITH WALKMAN
1.XROM™ v1.4:http://forum.xda-developers.com/showthread.php?t=1538083
2.WT19i (Live with Walkman) 4.0.2.A.0.62:http://forum.xda-developers.com/showthread.php?t=1439311
3.MIUIv4 beta 2 build 2:http://forum.xda-developers.com/showthread.php?t=1490166
4.[IPHONE-STYLE]Joy os:http://forum.xda-developers.com/showthread.php?t=1540755
POST 4
ROMS FOR XPERIA ACTIVE
1.Spartan Rom V1.8.5:http://forum.xda-developers.com/showthread.php?t=1375991
2.ST17i (Active) 4.0.2.A.0.42:http://forum.xda-developers.com/showthread.php?t=1310292
POST 5
COMMON ROMS
1.CM7.2.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1226715
2.CM9.0-FXP114:http://forum.xda-developers.com/showthread.php?t=1445821
3.HYBROM v16:http://forum.xda-developers.com/showthread.php?t=1373435
4.MIUIv4 2.3.16:http://forum.xda-developers.com/showthread.php?t=1554996
5.Xperia UXP NXT:http://forum.xda-developers.com/showthread.php?t=1520456
6.ExMIUIv4 2.3.30-r1:http://forum.xda-developers.com/showthread.php?t=1578109
7.MiniCMSandwich AOSP Android 4.0.4 RC3:http://forum.xda-developers.com/showthread.php?t=1434001
POST 6
CUSTOM KERNEL
1.[Mini/MiniPro/LiveWithWalkman/Active] Rage Kernel v2.6:http://forum.xda-developers.com/showthread.php?t=1398910
2.KRsH Kernel v3.0 (MiniPro):http://forum.xda-developers.com/showthread.php?t=1349630
3.[Mini/MiniPro/LiveWithWalkman/Active] X kernel 2.6.32.58 ZRAM:http://forum.xda-developers.com/showthread.php?t=1451150
4.NeroDroid Kernel(FOR NERODROID ROM):http://forum.xda-developers.com/showthread.php?t=1458963
5.b KERNELS(FOR SK17i-ST15i-WT19i):http://forum.xda-developers.com/showthread.php?t=1440161
6.KRsH Kernel v3.0 (Mini):http://forum.xda-developers.com/showthread.php?t=1351709
POST 6
BRICKIG AND SOLUTION
...I BRICK MY XPERIA MINI TWISE AND I MANAGE TO SOLVE IT..I AM ADDING THIS POST BEACAUSE I KNOW HOW IT FEELS WHEN YOUR MOBILE BRICKED..
{1}.IF YOU HAVE UNLOCK BOOTLOADER AND YOU ACCIDENTALLY RECEIVE FOTA THEN YOUR XPERIA WILL NOT START IT WILL JUST VIBRATE.
FOR SOLUTION GO HERE:http://forum.xda-developers.com/showthread.php?t=1126358..
{2}.IF YOU ACCIDENTALLY FLASH ANOTHER MODELS ROM ON YOUR PHONE..AND IF YOUR TOUCHSCREEN DOES NOT WORK
THEN GO HERE FOR SOLUTION:http://forum.xda-developers.com/showthread.php?t=1423562
{3}.NEXT TIME WHEN I BRICK MY MOBILE AND I ABLE TO FIND SOLUTION THEN I WILL POST HERE...
POST 7
CUSTOMIZATION
I AM ADDING THIS POST FOR THOSE WHO DONT WANT TO UNLOCK BOOTLOADER..
THAT MEANS TO CUSTOMIZE YOUR XPERIA YOU DONT NEED TO UNLOCK BOOTLOADER..
BUT YOU WILL NEED ROOT ACCESS AND CMW INSTALL ON YOUR MOBILE..
FOR THOSE WHO WANTS CMW WITH LOCK BOOTLOADER GO HERE:http://forum.xda-developers.com/showthread.php?t=1437840
THERE ARE PLENTY THREAD BUT I AM ADDING SOME OF THEM..REST YOU CAN CHECK IT OUT BY YOURSELF..
SO LETS GET STARTED..
1.Customizable Quickpanel, Flashlight toggle:http://forum.xda-developers.com/showthread.php?t=1306044
2.Xperia S v1.7:http://forum.xda-developers.com/showthread.php?t=1503570
3.IceCream Sandwich Xperia V4.0:http://forum.xda-developers.com/showthread.php?t=1453698
4.SE Mix ICS v4:http://forum.xda-developers.com/showthread.php?t=1482244
5.All In One-Live/Mini/Mini Pro/Active:http://forum.xda-developers.com/showthread.php?t=1404786
6.HTC Sense Theme:http://forum.xda-developers.com/showthread.php?t=1546345
If there is anything that I missed please send me a PM to have it added. Please provide a link in the PM, thanks.
If I helped you in anyway, please say thanks!
You should also post links to the stock kernels for the latest f/w's..... ;-)
amey2606 said:
you should also post links to the stock kernels for the latest f/w's..... ;-)
Click to expand...
Click to collapse
your request has been granted..
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
akshay13071990 said:
are you having problem in flash mode and fastboot mod???that you are not able to access both mod..
Click to expand...
Click to collapse
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
ramezzidane said:
exactly
i used to enter flash mode and flash generic roms
even fastboot mode
but i can enter fastboot mode now via flash tool 5 (fastboot via adb)
any help
Click to expand...
Click to collapse
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
akshay13071990 said:
use Flashtool version 0.6.7...open flashtool connect your mobile via usb..check unknown source and usb debugging are on..you have to be in MSC mode instead of MTP mode to get into fastboot mode or flash mod..now to get into fastboot mod click on flash on flashtool 6.7..then there will two mode flashmod and fastboot mod..in flashboot you can flash tft files..and fastboot mode is to flash custom kernel..in fastboot mod just click on reboot into fastboot mode(via adb)..then your device will boot ino fastboot mode..then if you want to flash kernel then click on select kernel to flash..after flashing click on reboot device into system..if your device doesnt boot in to fastboot mode then check weather adb drivers are install or not..
Click to expand...
Click to collapse
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
ramezzidane said:
sorry man but maybe you haven't read my original post.....any way and for short
i have strange problem
http://www.youtube.com/watch?v=mM8wTDuzBPk&feature=youtu.be
turn off the phone
then vol-
then i but the usb cable
nothing happend and continue to charging mode and a photo of battery
i'v flashed my phone serveral times and using flashtool normaly
so i know whats im doing and doing it in the right way
Click to expand...
Click to collapse
sorry dude i have tell you what i know..i cant help you..
i hope you will solve your problem in future..
try to go to service center and tell them your problem...
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
TA stands for TrimArea.....
http://forum.xda-developers.com/showthread.php?t=1126358
Ask Bin4ry about it..
He knows better.....
nice thread akshay keep it up
metalrawk said:
nice thread akshay keep it up
Click to expand...
Click to collapse
thanks..
thanks any way
ramezzidane said:
thanks but i need help......
a few days ago i'v accidentaly press Repair TA in Octopus SE 1.0.9 when my wt19i was connected in flash mode (the green light mode)
after that my phone starts normaly but i can't put my phone in flash mode any more
what does repair TA do to my phone
and who can i fix it
i'v a Thread here but not solved
http://forum.xda-developers.com/showthread.php?t=1466492
((( When I try to enter the download mode (green light), nothing happens
And by turning off the phone and then remove the battery for thirty seconds and then hold down the button on the vol - and while it put the cable to the phone
This way I follow you since the first use of the phone and they are successful and you use the flash tool to update the phone with ease
However, this method no longer working, and when applied to the phone continues to take off the battery charging status
I have experience on another computer and another cable but without the benefit of
even fastboot mode
but i can enter fastboot mode via flash tool 5 )))
Sony Ericsson PC Companion updated my phone three days ago to 62 stock room
but still cant enter flash mode
Is there any solution ......
note:
about the original TA file
i'v followed the path :
C:\Program Files (x86)\GsmServer\Octopus_SE\BACKUP
and found a file there :
WT19i_35850804005723_27-01-2012_01-36-04.TA
this is the original TA
now how to write it to my phone to restore (vol- & vol+ function)
Click to expand...
Click to collapse
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
ramezzidane said:
thank god i finally solve it by huge trick
http://forum.xda-developers.com/showpost.php?p=22427634&postcount=53
Click to expand...
Click to collapse
that is a great news..and best of luck with your new born live with walkman
akshay13071990 said:
that is a great news..and best of luck with your new born live with walkman
Click to expand...
Click to collapse
thanks dude
akshay13071990 said:
THREAD OVERVIEW
I THINK 80% OF ROM NEEDS UNLOCKED BOOTLOADER..WITHOUT IT YOU CANT FLASH CUSTOM ROM...
Click to expand...
Click to collapse
Witch rom Can I flash with locked bootloader then?
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
Just stock rom, no more.
Sent from my SK17i using xda premium
piotrasss87 said:
Witch rom Can I flash with locked bootloader then?
Click to expand...
Click to collapse
all in one:http://forum.xda-developers.com/showthread.php?t=1404786
this is a kind of a rom..it changes all things..but dont have any script..but you can try rom toolbox pro from android market it has many features like sd card read speed font change,boot animation change..to do all this you need only root and cmw install...without unlocking bootloader...isnt it great.so if you want then try it..
I already mod my sk17i this way,only thoud there is something else I can do with it.Thanks any way.
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash system boot.img
and i changed the name of the xperiasspeed.img to boot.img
Everything said it installed successfully, but now when I press the power button, it vibrates but does not boot.
I can get back into fastboot mode but thats it.
any help or ideas?
thanks
Flashtool.
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
I'm not an expert but it not sound like bricked device, but rather kernel installation that went wrong.
Just try flashing one more time, or flash your backup. You did a backup aren't you?
Sent from my LT26i using xda premium
brdl04 said:
could you possibly elaborate?
I am downloading the flashtool but what is the purpose and how do you use it?
Click to expand...
Click to collapse
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
K900 said:
Read the docs, there's a nice guide. You can also try the repair feature in PC Companion, but it might require the system to boot, so not sure.
Click to expand...
Click to collapse
What docs are you refferring to?
I have downloaded stock LT22_6.0.B.1.654.zip and am wanting to use the flash tool to flash this .img
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
brdl04 said:
So trying to fastboot my phone with doomlord Xperiasspeed
I did the command :
Fastboot flash *system* boot.img
and i changed the name of the xperiasspeed.img to boot.img
...
Click to expand...
Click to collapse
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
gtrab said:
OK step by step
Your phone could be easily recovered, we can try to do it
1.- have you tried a cold reboot ?? (with the xperia S hold both VOLUME UP key and POWER key during 10 to 15 seconds until device vibrates three times, not sure if it's the same with the P, then press power and check if it boots)
Still stuck??
2.- Download flashtool 0.8.0 and install it from here: http://androxyde.github.com/Flashtool/
-then download the 0.8.6 update and install it too
-then download a STOCK xperia P FTF and put it in the flashtool/firmwares folder (it should be in the root of your har drive, eg.: c:\flashtool\firmwares)
-then, enter flash mode (with the phone off hold VOL DOWN while connecting the USB cable to PC -> the LED will light green) and let your PC install the drivers
-then remove the USB cable, run Flashtool, press the flash button (the thunder icon), select "Flashmode" and click OK, select yourstock firmware for Xperia P and press OK
-When asked, enter flashmode again (flashtool shows an old xperia device, use the proper key combination for your device as stated before) and flash a fresh copy of the stock firmware.
-After flashing is complete, disconnect phone and press power to check if it's all OK.
---------- Post added at 12:37 AM ---------- Previous post was at 12:29 AM ----------
--------------------------------------------------------------------------------------
BEWARE !!
1.- You are very confused my friend, "xperiasspeed" is from krabappel2548, not form doomlord.
2.- The proper commands should be:
To flash a boot image:
Code:
fastboot flash [B]boot[/B] boot.img
To flash a system image:
Code:
fastboot flash [B]system[/B] system.img
I am not sure what did you download from krabappel2548, but it seems you flashed a "boot" image to your phone's "system" image
You are mixing stuff up
Please read this guide before attempting anything again
-------------------------------------------------------------------------------------------------------------------------
Another advice:
Fastboot and Flashtool are different ways to flash.
To flash with flashtool you enter flash mode -> press the VOLUME DOWN key -> LED turns GREEN
To flash with fastboot you enter fastboot mode -> press VOLUME UP key -> LED turns BLUE
.
Click to expand...
Click to collapse
When I hold down the Volume Down button and connect my Xperia P to flashtool, the notification LED goes green but the window with the old Xperia device doesn't go away and after a while the green LED turns red and the screen shows the charging animation.
I can enter CWM while the device powers up but I can't mount USB storage. My bootloader is locked and I tried to install the .54 small app tweak on my .544 (I didn't think it'd be an issue, but I was wrong! I'm a n00b. Nu H8 Pl0x )
I've also tried using the Sony Update Service but it can't detect my firmware because it can't detect my phone in Flash mode
Someone please help me. I've searched everywhere but couldn't find a solution.
I have the same problem, did you ever get this solved?
Old thread
Eason85 said:
I have the same problem, did you ever get this solved?
Click to expand...
Click to collapse
eswawan said:
Old thread
Click to expand...
Click to collapse
Check these websites. It will help.
If you are still confused about the process, ask again specifically!
http://developer.sonymobile.com/services/flash-tool/use-the-flash-tool-for-xperia-devices/
Hi everyone
I have tried to Root my ST15i with auto root aplication runme.bat but when it copmletes the phone was not rooted. Then i tried to unlock bootloader with SE Bootloader_Unlocking_Relocking and i sucseeded. Then i have run Flash Tool and after that the phone wont start up anymore. It can only be connected with PS over USB, and than blue and green lamp shine (vol up + USB shine blue/ vol down + USB shine green)
flash a kernel with a recovery mode and then flash stock rom ftf file or a custom rom from the recovery mode.
The blue one is fastboot to flash kernels and green flashmode to flash ftfs.
So since ur bootloader is unlocked, try flashing a custom kernel. And then flash a custim rom through recovery in the kernel
Don't forget to hit thanks
I consulted a lot of guides and all are for ftf, and none img to flash, it does not work with flash tool, I have bootlader unlock, but when I leave the volume button and connect the usb, do not get into fastboot, I have the naa kernel and not as a change table I want to use the kernel 4.2 but just was not ftf img and as I do, help
I think that you are not using the right button.
If i remember back in my y Arc days, fastboot is showing by pressing MENU button while attaching the usb cable
Enviado desde mi GT-I9300 usando Tapatalk 2
To flash .IMG file,you must enter fastboot
To enter fastboot (for Mini,mini pro,Active and LwW),you must install the fastboot driver inside the Flashtool folders,then plug the USB 2.0 to your computer while opening the flashtool,then press the volume up button and hold it while connecting the micro usb.Your phone should now emits a blue led light...congrats,you just enter fastboot mode!Now,just choose your .IMG file and flash it...
Sent from my LT28h using xda premium
thanks!
UchihaDareNial said:
To flash .IMG file,you must enter fastboot
To enter fastboot (for Mini,mini pro,Active and LwW),you must install the fastboot driver inside the Flashtool folders,then plug the USB 2.0 to your computer while opening the flashtool,then press the volume up button and hold it while connecting the micro usb.Your phone should now emits a blue led light...congrats,you just enter fastboot mode!Now,just choose your .IMG file and flash it...
Sent from my LT28h using xda premium
Click to expand...
Click to collapse
Thanks man, light is green and not blue? and enter flash mode, correct?
Naa Kernel wich is your device??
nAa kernel is for X8 X10mini and X10 mini pro
geja said:
Thanks man, light is green and not blue? and enter flash mode, correct?
Click to expand...
Click to collapse
No buddy, the led light MUST BE BLUE... then only you will be on fastboot mode and can flash a kernel.
---------- Post added at 08:45 AM ---------- Previous post was at 08:36 AM ----------
http://unlockbootloader.sonymobile.com/fastboot-buttons
Here's a guide to enter fastboot mode...
And make sure the Kernel must be for your device
geja said:
Thanks man, light is green and not blue? and enter flash mode, correct?
Click to expand...
Click to collapse
blue led = fastboot mode, for kernel change
green led = flashmode, for flash roms (and .ftf files) with flashtool, seus or pc companion
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
flash kernel usiing fastboot (not flashmode)
download this, then extract. (u need to have Android sdk installed, if not search google & install) http://www33.zippyshare.com/v/22861267/file.html
1. pur kernel into the fastboot folder
2. power off device. press & HOLD vol up button when u cannect to pc. the blue led should lit. leave phone
3. go back to fastboot folder click in empty space, then hold 'shift' & press right mouse button --> ''open console here''
4 now u should have a black box (cmd)
5 type ''fastboot flash boot boot.img'' (without quotes, & remeber the red text is the name of the kernel may u have to rename it)
6. fast boot should tell u all done, ok.
7. boot in CWM
ramkumarkr666 said:
guys pls help,am a newbie don't know much about all these stuffs my phone is ....
xperia ray,rooted,bootloader unlocked without loosing DRM data ,currently on zellycream rom .ics
when am installing beanstalk rom in cwm recovery it show error like cannot install this zip file.and now stuck at sony logo cannot enter into cwm recovery .
before installing i tried to flash boot.img using flashtool it shows error (cannot do this in fastboot mode)so i tried some stupid method using cwm and later:crying::crying::crying:
realize its only for qualcom running device.
i cannot flash stock kernal in flash mode back button showing no response.
any body pls help :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed: :crying::crying::crying:
Click to expand...
Click to collapse
download flash tool and install it ...
switch off phone
connect the usb to pc and phone by holding volume up key NOW blue led light up...u can see flash tool notify that device connected in fastboot mode..
Now press the lighting key select fastboot ...then select kernel to flash...
DONE...
Note: phone driver must be installed