hi all,
i have a E10i phone and i got a problem on it.
the phone sometimes closes while using and opens again and sometimes it closes and stays there. the phone is pretty old.
do you think it cant be fixed? does anyone knows for phones and knows where is the problem?
sorry for my bad english
leonleonleon said:
hi all,
i have a E10i phone and i got a problem on it.
the phone sometimes closes while using and opens again and sometimes it closes and stays there. the phone is pretty old.
do you think it cant be fixed? does anyone knows for phones and knows where is the problem?
sorry for my bad english
Click to expand...
Click to collapse
I can't understand your problem well but I think full wipe or flashing stock rom using a computer will fix your problem , good luck:beer:
This is JAY-Z-S
jay-z-s said:
I can't understand your problem well but I think full wipe or flashing stock rom using a computer will fix your problem , good luck:beer:
This is JAY-Z-S
Click to expand...
Click to collapse
lets say, im going to take pic. whil it takes the pic the phones closes entirly and then boots again.
i tried everything. this started with stok rom, tried other roms and nothing. i think its hardware problem
what is your rom and kernel???
Sent from my E10i using xda app-developers app
now i have MiniCM7 with his kernel
leonleonleon said:
now i have MiniCM7 with his kernel
Click to expand...
Click to collapse
Does it crashes at gallery or downloading files? If yes its caused by your damaged sdcard ,try a new one
This is JAY-Z-S
jay-z-s said:
Does it crashes at gallery or downloading files? If yes its caused by your damaged sdcard ,try a new one
This is JAY-Z-S
Click to expand...
Click to collapse
when im putting the SIM cart or going to take pic it reboots, in idle it has no problem. it plays videos as well.
that problem was with stiock rom too, i think it might be tecnical problem
leonleonleon said:
when im putting the SIM cart or going to take pic it reboots, in idle it has no problem. it plays videos as well.
that problem was with stiock rom too, i think it might be tecnical problem
Click to expand...
Click to collapse
Wasn't with this phone, but when i used LG GT400 i had some problems as well and it really needed some hardware repairing in the store.
So maybe your phone needs a repairing as well, because in time some things in the phone start to lose it's capacity.
Or, you could change your camera apk and see if it still reboots the system, or it can be something about the SIM card as well because i was told that the problems i had with the LG phone could be because of the SIM card, so maybe a good idea is to change SIM card and take phone to Repair if the camera apk change doesn't work, and if going back to the Eclair Original ( not flashing a backup, not rooting, not having cwm, just flashing the Eclair Original by SEUS ) doesn't work either.
i just opened the phone and noticed that the sim holder tape is a bit cut, not cut at all but i think the wires has contact to each other.
can that problem be from that?
what can i do to be sure that thats the problem so to replace it.....
leonleonleon said:
i just opened the phone and noticed that the sim holder tape is a bit cut, not cut at all but i think the wires has contact to each other.
can that problem be from that?
what can i do to be sure that thats the problem so to replace it.....
Click to expand...
Click to collapse
hey bro try this note:before you proceed im not responsible if anything happen to your phone do this at your own risk and backup before you do this...
Step 1
-update your phone with seus
-if a message popup that
your phone has already the latest version
-click install or yes(if im correct)
-if the update is finish go to step 2
Step 2
-install root explorer app if you have
-Root your phone via superoneclick
-Wait until it finish
-if finish download the xRecovery from this forum
-Follow the instruction... and if finish go to step 3
Step 3
Now your phone is rooted and have a xrecovery... do this
note: No need to unlock the bootloader... If you to verify Use s1tool to verify your bootloader unlocked or not...
-redownload the minicm7-2.2.1 for x10 mini and download the nAa-14 kernel from nAa's thread
-flash the nAa-14 kernel for GB(NOT JB) via flashtool
-power on your phone wait until it boots then go to recovery mode...
note:if your phone is not booted up repeat the step1 and 2
-do this in recovert
Backup your phone(dont skip)
Format system
factory reset
wipe dalvik cache
wipe battery stats
-then flash the rom then wait until it finish
-IF finish reboot system now
Now your phone has no problem
Click to expand...
Click to collapse
i hope it works
PS: dont forget to click thanks... if it works
Related
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
I think you use flashtool and flash a 2.1 firmware
Flash Tool
2.1 Firmware can also be found in the flashtool post.
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
kozxmartt said:
Can you use xRecovery after this problem?
If so, why don't you restore the backup that you have made ?
Click to expand...
Click to collapse
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
G-FACE said:
I think the format erases the xrec. In this case, as the colleague up there told him flashtool is the solution.
Click to expand...
Click to collapse
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Thanks a lot guys, it works !
same problem here but i have tried flash tool many time.what shall i do?
Hi jojooo89,
I suppose crossover might not help you in flashing even thought it might detect the phone after some tinkering.
flashing works only on windows either throught SEUS or flashtool...
the reason being usbflash.dll is only on windows.
jojooo89 said:
Hi guys,
I've got a big problem, I've used "format/system" in xRecovery and now when I reboot, I'm only getting the Sony Ericsson logo. I did a backup on SDcard but I'm a Mac user so I've used Crossover to use SEUS and try to restore. The problem is the phone isn't detected, only the green LED is turn on but nothing happen on the Mac...
I'm gonna try on PC, but if you can help me ... it will be great !!
(Sorry guys for my english, but I'm a french student who spend more time on his X10 than in english class !)
Click to expand...
Click to collapse
christos3290 said:
same problem here but i have tried flash tool many time.what shall i do?
Click to expand...
Click to collapse
If you can still get into x-recovery, you could try mounting your SD card, copying over a ROM and then installing it with x-recovery
kaisan1 said:
no, nothing done from the xrecovery erases xrecovery..!! anyways you can use flashtool..!!
Click to expand...
Click to collapse
This is not true. In 'Partition Tools' there is a 'Format System' option that formats everything including the system files/folders. Since XRecovery files are in the 'System' folder using this option removes XRecovery. There is a warning in the XRecovey thread to never use this option without having another system image to replace it with.
I would assume based on that warning though that there is some way to replace the system but thats a question for Z.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Yeap, i believe i'm screwed. i did that and well... my /system files are screwed.
if my battery is dead and i cant charge it from the phone what shall i do??
are you using a wall charger?
Sent from my X10 TripNMiUI using XDA Premium App
its something which i plug on the wall socket and then the usb is connected on that. no matter how many hours i leave it to charge as soon as i unplug the usb my phone turns off
jojooo89 said:
Thanks a lot guys, it works !
Click to expand...
Click to collapse
How did you fix the problem?
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
ballebel said:
How did you fix the problem?
Click to expand...
Click to collapse
Hzu said:
Use flashtool and flash the generic firmware.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Exactly, it worked perfect for me !
I format the system of my X8
Me too, I format the system of my Sony X8 with the Xrecovery and now when I reboot, I'm only getting the Sony Ericsson logo.
How can I repair the X8 smartphone? with flashtool and generic firmware?
where can I find that software?
system format, cannot flash
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Re: [Q] Oops, I've used format/system ... :)
Csabci85 said:
Hey everyone!
I have a huge problem. I tried to update my OS from cm10 5.1 kernel v16 to cm10 8.1 kernel v18.
I used system format, and when I start my phone it just showed me CM10 logo.
I tried to flash to stock verision, somehow I managed it, but now SE logo on my phone, and I can not flash again, because when I flash my phone it's starting itselfs automatically, so the flashing stops
Could someone help me? I hope you could understand what I wrote.
Thanks
Csabci
Click to expand...
Click to collapse
Do you hold back button while flashing?
+no recovery?
sent via ULTIMATE GB beta
http://forum.xda-developers.com/showthread.php?t=1333234&highlight=CWM+ROMs+XPERIA+X10+Mini+Pro
I just flashed this ROM but the only issue is that after I install the 2nd HotFix, it doesn't show any ICS layout changes.
I don't understand why.
Anyone got an idea?
i had the same issue, so i reflashed everything again(including the wipe and cache wiping) without flashing hotfix2 for the second time. and it worked
Worth it?
vizey said:
i had the same issue, so i reflashed everything again(including the wipe and cache wiping) without flashing hotfix2 for the second time. and it worked
Click to expand...
Click to collapse
I have set up everything already and all. Is it worth it to do all that again? Does it have the ICS theme?
lewiscb said:
I have set up everything already and all. Is it worth it to do all that again? Does it have the ICS theme?
Click to expand...
Click to collapse
for me, the theme started working properly after doing a second install, just did the steps over again and it worked pretty well for me. i don't know how or why, but it worked for me, also note that i didn't install the hotfix 2 on the second install.
The ROM has been updated to v1.2.4, so maybe worth giving that a try?
scook94 said:
The ROM has been updated to v1.2.4, so maybe worth giving that a try?
Click to expand...
Click to collapse
yes it has, i haven't tried it personally myself... there are some users having issues with the contact app and also have seen feed backs regarding animation being not as smooth as it was before... so i am waiting out till it's all good
vizey said:
yes it has, i haven't tried it personally myself... there are some users having issues with the contact app and also have seen feed backs regarding animation being not as smooth as it was before... so i am waiting out till it's all good
Click to expand...
Click to collapse
I believe the issue with contacts can be resolved by removing google+
x10 mini pro stuck CM9 installation
Hi
my phone is xperia mini pro U20I
I read all Q&A but i couldn't found my ans , i think its rare i read you write if your phone stuck ""
if not or if you can't access to CWM use Sony Ericsson Update Service to recover your phone ..
i was using xrecovery before this accident and now xrecory doesn't work i tried but not access.
i install Sony Ericsson Update Service in my pc and try to connect but my phone is not responding to pc, how can i on usb debug or mount phone to pc , please let me know what is the solution , i was installing cm9 and it happend my phone stuck at starting logo please help me
I haven't downloaded anything recently, I literally just picked up my phone after I woke up and I got a message saying "the application tasks provider has stopped working unexpectedly" and it gives me the option to force close. When I close it, a similar message pops up for email, messaging, social hub, tw launcher, facebook and it keeps going on and on without giving me a chance to use the phone. Do you guys know what I can do? I would be extremely grateful if you could help me out.
Bwahahahaa ;-) Gold.
Yes i've tried that. I've take the battery pack, memory card and sim card out, then replaced them but the loop keeps occuring. It's gotta be more of a software issue and that's why I need your help.
You haven't told us anything whatsoever about your setup/rom/kernel/etc. We're not mind readers
Try a factory reset in the first instance.
If you're running anything other than stock firmware, go back to stock firmware.
i recomendeed to change your rom..
i think that is a crush from your system, mate..
About 4 months ago I had exactly the same problem.
Is there Debugging-Mode enabled in you're phone?
Is you're phone rooted?
Try to take out only the SIM Card and then connect it to you're PC. Then turn the S2 on and try to backup all you're data.
If you're phone is rooted, try to boot up in CWM Recovery Mode and go to "advanced" and then "Fix Permissions". It shuold solve you're problem.
If you're phone isn't rooted, then you have to flash a stock or custom ROM.
MistahBungle said:
You haven't told us anything whatsoever about your setup/rom/kernel/etc. We're not mind readers
Try a factory reset in the first instance.
If you're running anything other than stock firmware, go back to stock firmware.
Click to expand...
Click to collapse
Sorry about that man, but I have no idea what my setup/rom/kernel is, don't even know what most of that means. The thing is I can't even go to the settings on my phone to check because the popups won't allow me to.
okries said:
i recomendeed to change your rom..
i think that is a crush from your system, mate..
Click to expand...
Click to collapse
I am an absolute and toal amateur, any advice at all of how to to that?
Dr.MacHack said:
About 4 months ago I had exactly the same problem.
Is there Debugging-Mode enabled in you're phone?
Is you're phone rooted?
Try to take out only the SIM Card and then connect it to you're PC. Then turn the S2 on and try to backup all you're data.
If you're phone is rooted, try to boot up in CWM Recovery Mode and go to "advanced" and then "Fix Permissions". It shuold solve you're problem.
If you're phone isn't rooted, then you have to flash a stock or custom ROM.
Click to expand...
Click to collapse
I know about technology but not like this. I have no idea what debugging mode/rooted or cwm recovery is. Any chance of explaining it to me in really, REALLY easy terms?
Sorry about my lack of knowledge guys, but I wholeheartedly appreciate you taking the time out to give me a hand.
1. Try wiping all data (fixed when i had the problem)
1. U need a kernel with CWM recovery (recommend siyah kernel)
2. Install with odin look on these forums for odin dont remember link
3. go to recovery (vol up+home button+power) and wipe data/cache (wipes everything apps, passwords, etc)
4. Try now if works click the thanks button
klawz said:
I know about technology but not like this. I have no idea what debugging mode/rooted or cwm recovery is. Any chance of explaining it to me in really, REALLY easy terms?
Click to expand...
Click to collapse
No problem man
Okay...when you have root permissions on youre phone you can write in system files and do other administrative work.
You can root youre phone by flashing a rooted kernel. The kernel is something like the heart of youre Android OS. You have to know some facts about youre S2, to root it successfully.
You have to know which Kernel version is installed at the moment. This information you can find in Settings -> About Phone -> Kernel Version (or something like that...my S2 is in German ). But when youre phone is bricked or youre system is damaged, its really hard or impossible to find out the kernel version. I think you won't be able to root it successfully :-(
So the only one possibillity to rescue youre S2 is, to flash a new firmware.
Hi guys,
I've been using my Sola for over a year now and I like the phone, i got the CM9 build from freeXperia on it (FXP 210 CM 9 PEPPER) with cwm on it and loved it.
Two weeks ago trouble began when the phone was very unreliable, it rebooted several times a day, sometimes I noticed that the phone got very warm when rebooting.
I found out that there was no diskspace left, so I deleted some of the playlists on Spotify that I downloaded and that gave me back about 2 gb of internal room.
Since yesterday some processes where quitting and this happened a couple of times (it was the google media process), this morning after being on the adapter for the night the problem was still there. So I rebooted the phone (normal reboot) and then the trouble really kicked in.
When I boot now I see a message stating "Android is being updated, starting apps" then I see my normal lockscreen and the errors start rollling in.
The only errors I can see are the "android.phone process stopped working" and "NFC service stopped". When I press close on those they keep coming back, so fast I cant't even get past my lockscreen anymore.
On the phone is some very critical data to me, I have to restore that data (its in a encrypted app database). As long as I can save that data and restore it to use when the android/app is restored I'm fine.
Can someone give me advise on how to continue?
**bump, I really need my phone
VeldMuijz said:
**bump, I really need my phone
Click to expand...
Click to collapse
Bump! Getting desperate here...
VeldMuijz said:
Bump! Getting desperate here...
Click to expand...
Click to collapse
Where is that data located? If it's on internal memory in it's own directory it will remain intact if you repair/flash firmware.
EDIT: some other thoughts, try to remove the SIM or switch to airplain mode.
I'm not 100% percent sure where it is located, It's on the internal memory but I'm not sure if where it is exactly. It's a database of an app.
Won't I lose all my files on reflash? Reflash can be done with fastboot right? And I should reflash the firmware (kernel?)? Not the rom itself?
Already tried rebooting with SIM and sdcard out, no luck though.
No luck on connecting to ADB, I tried but USB debugging is turned off and my drivers seem to let me down... I can get connect to fastboot
Other ideas?
VeldMuijz said:
I'm not 100% percent sure where it is located, It's on the internal memory but I'm not sure if where it is exactly. It's a database of an app.
Won't I lose all my files on reflash? Reflash can be done with fastboot right? And I should reflash the firmware (kernel?)? Not the rom itself?
Already tried rebooting with SIM and sdcard out, no luck though.
No luck on connecting to ADB, I tried but USB debugging is turned off and my drivers seem to let me down... I can get connect to fastboot
Other ideas?
Click to expand...
Click to collapse
Too bad USB debugging is off.
If database is on device memory than it will be lost if you wipe data on flash. If you don't wipe data you may still have those errors, but you can take your chances and try without wiping data.
Yes with flashtool, do you have the FTF file for the firmware you are currently using?
Is it tooted and have CWM on it?
I don't have the FTF anymore, but I know where to find it.
Luckily I have CWM on it.
Do I have to reflash with the zip or just run the update?
VeldMuijz said:
I don't have the FTF anymore, but I know where to find it.
Luckily I have CWM on it.
Do I have to reflash with the zip or just run the update?
Click to expand...
Click to collapse
I think best is to make your own FTF.
Start repair with PC Companion, and when it finish downloading the files and ask to shut down the phone, stop and create the FTF as explained here.
The FTF can only be flashed with flashtool.
I don't mean to sound rude but why do I want my own FTF?
Do you mean a FTF from the OEM firmware, they can be downloaded from XDA as well.
Or do you mean creating an FTF from the files that are now on my phone?
VeldMuijz said:
I don't mean to sound rude but why do I want my own FTF?
Do you mean a FTF from the OEM firmware, they can be downloaded from XDA as well.
Or do you mean creating an FTF from the files that are now on my phone?
Click to expand...
Click to collapse
I've seen a few people hat flashing firmware they download didn't work well for them but flashing with SUS or PCC did.
I'm not twisting your hand, if you rather use FTF you can download somewehere and it works then do that.
Ok so i tried to flash the kernel, the flashing went well but the error persists.
I think it's time to conclude that my data is gone..
It gave me some headaches and I sweared a lot but i got it working again.
I've flashed the boot.img, didn't resolve the issue.
I've updated the same rom over my old rom, didn't solve the issue.
I wiped cache only (to try and see if it would work) and this worked.
So it might have been a cache problem after all.
The updating android thingy was shown again only this time it said it had to update 100+ apps, and it did. After that I could use my phone again.
First things first, lets make a backup .
Thanks ChickeD (i've thanked you on XDA for your help)
This can be marked as [RESOLVED]
Hey guys hope you are well, wondering if you can help me with an issue on my Z2. I've noticed recently my phone has started to fell very hot to touch and occassionally lagging a bit doing pretty normal things like web browsing. I ran unutu and found that I wasn't getting the scores that I usually got even at stock and when overclocked a message would come up stating that my phone was too hot to even start the test. I've don't think it's too many apps I've checked my cpu oads during normal use and they always stay under 40%. I run greenify and have manager to limit the number of apps at start up. I also run at -12 volatge daily and I haven't run into any issues with temps up to now so I really can't figure out what it could be. Anyone have any ideas to to what could have caused it?
Bump, anyone?
Make a backup in twrp or cwm
Flash a FTF via flashtool, exclude data
See if it still lags
Sometimes partitions mess up
Envious_Data said:
Make a backup in twrp or cwm
Flash a FTF via flashtool, exclude data
See if it still lags
Sometimes partitions mess up
Click to expand...
Click to collapse
Well I am using a custom rom could that be causing it? I flashed the rom to begin with and i had no overheating issues at all but my phone started being weird with storage so I completely wiped the phone and installed everything again including the custom rom and that's when it started overheating
Bazooka Tooth said:
Well I am using a custom rom could that be causing it? I flashed the rom to begin with and i had no overheating issues at all but my phone started being weird with storage so I completely wiped the phone and installed everything again including the custom rom and that's when it started overheating
Click to expand...
Click to collapse
Existenz causes mass heating, i dont know about the others all too much
Envious_Data said:
Existenz causes mass heating, i dont know about the others all too much
Click to expand...
Click to collapse
I'm using the Sirius audio rom, I haven't heard any reports of it overheating and it was fine the 1st time I installed so I think you may be right in saying my partition may be screwed up.
Just tried backing up my data using cwm and it comes up with an error message: 'Error while making a backup of /system' I definitely have enough space on my sd card, any idea what could be causing this?
EDIT: When backing up my it says there's only 700mb free when I know there's at least 17gb! some thing's definitely not right here
Bazooka Tooth said:
I'm using the Sirius audio rom, I haven't heard any reports of it overheating and it was fine the 1st time I installed so I think you may be right in saying my partition may be screwed up.
Just tried backing up my data using cwm and it comes up with an error message: 'Error while making a backup of /system' I definitely have enough space on my sd card, any idea what could be causing this?
EDIT: When backing up my it says there's only 700mb free when I know there's at least 17gb! some thing's definitely not right here
Click to expand...
Click to collapse
Backup your internal storage
(aka plug into pc and copy)
Flash a FTF using flashtool and after thats done put ur stuff back into ur storage
(int storage will be wiped)
EDIT 2: Just realised cwm was trying to backup to the internal storage but it was called sd card and my actual sd card was called sd card 1 seems to backing up fine now :good:
Envious_Data said:
Backup your internal storage
(aka plug into pc and copy)
Flash a FTF using flashtool and after thats done put ur stuff back into ur storage
(int storage will be wiped)
Click to expand...
Click to collapse
Ok so I wont need to factory reset before flashing a the rom again then?
Also what's flash tool? Can I not use cwm to flash?
Sorry for all the noob questions this is the 1st phone I've rooted and I'm pretty new to all this stuff
Thanks for your help Envious _Data I figured out what you meant above
just one last thing do I have to flash a stock rom and re-root again or can I convert my custom rom to a ftf file?
Bazooka Tooth said:
Thanks for your help Envious _Data I figured out what you meant above
just one last thing do I have to flash a stock rom and re-root again or can I convert my custom rom to a ftf file?
Click to expand...
Click to collapse
try flashing a stock based rom. if that doesnt work then flash a FTF
Ok so I've flashed a stock rom with flash tool, now I can just go ahead and flash my custom rom straight over the top right?
Bazooka Tooth said:
Ok so I've flashed a stock rom with flash tool, now I can just go ahead and flash my custom rom straight over the top right?
Click to expand...
Click to collapse
I'd recommend using stock rom as is for a couple of days, it'll give you a control to compare your custom rom with and hopefully rule out possible hardware issues.
ghostofcain said:
I'd recommend using stock rom as is for a couple of days, it'll give you a control to compare your custom rom with and hopefully rule out possible hardware issues.
Click to expand...
Click to collapse
Just tested idle temps and they do seem to be a bit lower, however I can't really compare atm as I did most of my testing whilst benching
So tried flashing a stock ftf rom but I'm getting the same temps as before, also when I try and flash a new rom I get a message saying 'android is upgrading: Starting apps'
Ok so tried deleting the system cache and deleted the dalvik cache as well as factory reset the device but now I cant flash a new rom or even charge the phone. Someone please help I basically have an unusable brick. Is there anything I can do or is the phone only fit for the bin now?