I had tried a CWM build and decided to go back to stock as there were issues with the keyboard.
I have RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed
I re-locked my device and when I run the RRU it fails "Partition Update Failed" error and it is the SBL1 partition
Any ideas
Home screen
Relocked
Security Warning
Puccinilte PVT Ship S-on RL
Hboot-1.78.0010
eMMC-boot
Aug 30 2011,22:25:56
When I try to flash boot.img from the RUU
fastboot flash boot boot.img
sending 'boot' (3730 KB)...
OKAY [ 0.401s]
writing 'boot'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.048s
More info:
ERROR [152]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
I have also tried RUU_Puccini_LTE_Rogers_WWE_1.26.631.4_Radio_1.05.550I.09v2_30.68.550I.12_release_219377_signed and received the same error
Well I know you cannot flash a boot.img through fastboot unless your bootloader is unlocked or you are S-OFF, so that explains why that fails.
As for the RUU failing to run, try running it while in fastboot. Also, try re-downloading either of these Roger's RUUs:
http://www.androidfiles.org/ruu/?dir=Puccini
Related
hi all,
I'm HBOOT 1.5 and htcdev method to unlocked(but s-on), but can not flash radio.img, fastboot flash radio radio.img said:
sending 'radio' (17505 KB)...
OKAY [ 3.859s]
writing 'radio'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 7.469s
the radio.img is extracted from PG86IMG.zip of 2.08.561.2.
Also, I can not flash wimax.img.
But, I can flash boot.img,recovery.img successfully, and totally updated with RUU 2.08.561.2 successfully. But when I try to flash radio.img,wimax.img with fastboot, it show above message; I tried toput radio.img,wimax.img onto the sd card(pachaged by PG86IMG.zip), hboot can find PG86IMG.zip, but after parsing the package, bootloader just ignore it and give nothing hint.
Any other method to flash radio.img? Thanks in advance!
Hello!
I installed Munjeni's special hboot partition (to increase usable space) and wanted to update the phone back to stock (to take back to att).
The RUU utility failed with code of 152.
The partition failed.
Now the phone is "stuck" at the black HTC screen with four warning triangles in each corner.
Any ideas?
I can fastboot and issue some commands...
I am s-on, hboot 1.02.
Thanks in advance!
DanGeorges said:
Hello!
I installed Munjeni's special hboot partition (to increase usable space) and wanted to update the phone back to stock (to take back to att).
The RUU utility failed with code of 152.
The partition failed.
Now the phone is "stuck" at the black HTC screen with four warning triangles in each corner.
Any ideas?
I can fastboot and issue some commands...
I am s-on, hboot 1.02.
Thanks in advance!
Click to expand...
Click to collapse
If the bootloader is accessible, you can try grabbing the rom.zip out of the RUU (run it & let it load, then search in Windows' temporary folder for "rom.zip". If not there's probably a download somewhere), and rename it to "LIBEIMG.zip" on the root of the SD card.
Then boot into the bootloader (vol down) and it should pick it up and start flashing (might be a confirmation before it does)
Edit: Well I looked at the title again... does this mean its not accessible?
It should be if fastboot is, but I've never had the bad triangles so not completely sure..
If not, alternate option that may work: extract the hboot image from rom.zip and flash it with fastboot (if its allowed)
This is the RUU zip: http://www.mediafire.com/?tay1j415ymvukh5
drumist said:
This is the RUU zip: http://www.mediafire.com/?tay1j415ymvukh5
Click to expand...
Click to collapse
Thank you for the link. I'm downloading it now.
I can fastboot, but I'm S-on (from one of my flashes).
What's the fastboot command for flashing the hboot? Will this even let me?
I'll give this a try. Thanks again!
When I try to fastboot flash a recovery, here's what I get:
C:\Mobile\Android\Fastboot and ADB Tool>fastboot flash recovery recovery.img
sending 'recovery' (3716 KB)... OKAY [ 0.875s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 1.578s
C:\Mobile\Android\Fastboot and ADB Tool>
For hboot - does anyone have an idea which hboot I can try flashing?
WinSuk said:
If the bootloader is accessible, you can try grabbing the rom.zip out of the RUU (run it & let it load, then search in Windows' temporary folder for "rom.zip". If not there's probably a download somewhere), and rename it to "LIBEIMG.zip" on the root of the SD card.
Then boot into the bootloader (vol down) and it should pick it up and start flashing (might be a confirmation before it does)
Edit: Well I looked at the title again... does this mean its not accessible?
It should be if fastboot is, but I've never had the bad triangles so not completely sure..
If not, alternate option that may work: extract the hboot image from rom.zip and flash it with fastboot (if its allowed)
Click to expand...
Click to collapse
I'll try the hboot image and see what happens.
What's the fastboot command?
I tried:
fastboot flash hboot
and
fastboot flash boot
Both gave me an invalid signature:
C:\>fastboot flash hboot hboot_liberty_7227_1.02.0000_101104.nb0
sending 'hboot' (512 KB)... OKAY [ 0.234s]
writing 'hboot'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.328s
C:\>fastboot flash boot hboot_liberty_7227_1.02.0000_101104.nb0
sending 'boot' (512 KB)... OKAY [ 0.234s]
writing 'boot'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.328s
So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
janderson2k said:
when I tried the stock RUU from HTC it gets to a point and fails telling me incorrect image or seomthing like that.. Should have written it down, I can run it again if the error helps.
Click to expand...
Click to collapse
Have you tried doing moonshine in ubuntu live cd/usb?
janderson2k said:
So last week a friend asked me to s-off his phone for him.. The phone ended up bricking (recovery gone, no os, etc...)..
Where I am at:
1. The phone is S-ON (Actually says "Monarudo PVT Ship S-ON"
2. The phone has an unlocked boot loader
3. The phone has TWRP 2.4 installed
4. HBoot 1.33
5. Radio 1.01.01.0110
6. OpenDSP v6.120.274.0114
7. eMMC-boot
8. The phone has a 4.1.1 based rom installed (Tried carbon 4.3 based, same issue and CM 4.2 based, same issue)
I have tried moonshine and face's s-off with no luck. I get about half way through with moonshine and it just sits there counting, adding periods.
I have tried :
1. Flashing a stock hboot 1.15
2. Flashing the stock splash
3. Flashing the stock RUU
Issues :
1. The phone gets NO reception Just the X with empty bars. I don't know if its the radio or something. Every once and a while I get 2 bars for a second but it goes away.
PLEASE HELP! I feel horrible that my buddy has to borrow my bionic until this is fixed.
Click to expand...
Click to collapse
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
finanandroid said:
Try
1 You need update to new Firmware 2.06 (for moonshine)
2 You need to Re lock Bootloader in order to RUU
3 you need to downgrade Hboot to 1.15 to RUU ( your phone show 1.33)
http://forum.xda-developers.com/showthread.php?t=2293919&highlight=flash+radio
Hope this help buddy
Click to expand...
Click to collapse
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
janderson2k said:
Anyone have a recommended method to downgrade the hboot? I havnt been able to get the 1.15 to flash to the phone.. Relocking the bootloader is cake.
I appreciate your help, Sorry if I sound n00bish.
Click to expand...
Click to collapse
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
soff
W00t! S-Off is done.. HBoot time....
?
finanandroid said:
Every one learn everyday.
Download 1.15 stock hboot. Rename to PL83IMG.zip. when u renamed it make sure is not zip.zip cause this file is already zip so u try only to rename it to PL83IMG (right click the file in your pc and check properties to make sure windows got it already as a zip extension) and place in the folder that contains ( in ur pc) your android-adb folder*
there is where any zip should go, with the exception of user preferences location. (or different folder named by the user)
Step 1) adb reboot bootloader
Step 2) fastboot oem rebootRUU
Step 3) Command to directory containing your renamed hboot zip (i.e. C:\android-adb\)
Step 4) fastboot flash zip PL83IMG.zip
*** When it says it is done in the terminal/cmdprompt execute step 5 )
[The green bar only fills up about 75% of the way]
Step 5) fastboot reboot-bootloader
Profit. Put the RUU Folder in same directory. right click and run it as administrator
Click to expand...
Click to collapse
So I am not sure whats up but I went through the process :
Code:
C:\adb>fastboot oem rebootRUU
< waiting for device >
...
(bootloader) Start Verify: 0
OKAY [ 0.051s]
finished. total time: 0.052s
C:\adb>fastboot flash zip PL83IMG.zip
< waiting for device >
sending 'zip' (434 KB)...
OKAY [ 0.218s]
writing 'zip'...
(bootloader) zip header checking...
(bootloader) zip info parsing...
(bootloader) checking model ID...
(bootloader) checking custom ID...
(bootloader) start image[hboot] unzipping & flushing...
(bootloader) [RUU]UZ,hboot,0
(bootloader) [RUU]UZ,hboot,50
(bootloader) [RUU]UZ,hboot,100
(bootloader) [RUU]WP,hboot,0
(bootloader) [RUU]WP,hboot,99
(bootloader) [RUU]WP,hboot,100
(bootloader) ...... Successful
OKAY [ 2.020s]
finished. total time: 2.241s
C:\adb>fastboot reboot-bootloader
rebooting into bootloader...
OKAY [ 0.046s]
finished. total time: 0.048s
and when I get back to bootloader it still says HBoot 1.33.. I used this hboot : http://www.mediafire.com/download.php?pj2lknq5gr0jkmf
Any ideas?
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Should I try RUU now or do I need hboot @ 1.15?
janderson2k said:
Should I try RUU now or do I need hboot @ 1.15?
Click to expand...
Click to collapse
yes u need Hboot, but you did before unlock, s-off with moonshine method or revone?
you can try RUU now but If you get an Image 158 error during RUU, try flashing the stock hboot again.
All sorted out.. Thanks everyone. I s offed, unlocked, and flashed new radio. All is well
Sent from my SCH-I605 using Tapatalk 2
letschky said:
I have the same Problem,but my Phone ist S-ON and Locked with H-Boot 1.33
Radio 1.01.04.0308
OpenDSP v4.120.240.0920
No Recovery,no Root,aahh
I can´t Unlock the Bootloader
Error Code: 160.
Error Reason: MID Not Allowed.
I can´t Downgrade to 1.15
c:\ADB>fastboot flash zip PL83IMG
sending 'zip' (434 KB)...
OKAY [ 0.203s]
writing 'zip'...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 0.250s
What can i do?
Click to expand...
Click to collapse
Is there no possibility?
I wanted Moonshine S-OFF,'ve updated the firmware and forgot to unlock the bootloader.
Now I have the software version 1.15.605.1, but the HBOOT version is 1.33 wlan can not be switched on and the screen flickers often know clearly wrong boot.img of the software2.06 and the modules from 1.15.
and I can not unlock the bootloader also'm not unlock with my old Unlock_code.bin.
I know now no longer continue...
Go here http://chat.andirc.net:8080/?channels= this People help
Today I had the same problem in my 10 minutes dna worked again
Okay so here's what is happening
My Htc one currently says when in bootloader
***Tampered***
***Unlocked***
M7_UL PVT SHIP S-ON RH
HBOOT-1.44.0000
RADIO-4A.17.3250.20
OpenDSP-v31.120.274.0617
eMMC-boot
Jun 21 2013,20:19:45:-1
C:\Fastboot>fastboot flash rom omni.zip
sending 'rom' (183005 KB)... OKAY [ 13.376s]
writing 'rom'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 32.457s
C:\Fastboot>fastboot flash rom omni.zip
sending 'rom' (183005 KB)... OKAY [ 13.885s]
writing 'rom'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 32.967s
I'm trying to flash the correct zip files through CMD because I can't open the Htc one up on my computer due to the fact that the Htc has no rom on it right now and will not appear on my computer. I have the options of getting caught in a bootloop, bootloader and TWRP recovery 2.6.3.3. . The issue is, is that I cannot use TWRP because I can't open the Htc up on my computer to drop the files in there and then install them through TWRP. Instead I'm trying to flash omnirom M7uL (latest one available) to it using cmd but it keeps saying failed as you can see due to some signature issue. How can I fix this problem? I can't even use my phone right now because it has no rom installed on it. :[
I'm no pro but if it was me I'd use an RUU to restore the rom since you can't use recovery
http://forum.xda-developers.com/showthread.php?t=1672425
Hi All,
Sometime ago I was able to install android 4.3 using the moonshine method. After sometime, I decided to go back to stock. I followed a tutorial on how to get back to stock RUU.
-Entered Boot loader, typed in cmd prompt "fastboot oem lock" received the word that lock was successful.
-Proceeded to run the RUU executable file 1.15 but received the "158 error"
Now my phone has been wiped of any OS since I relocked the phone, but it still says "moonshine s-off".
I tried to use TWRP recovery adb sideload the proper hboot file to match the RUU but get this message
Failed
Updating partition details...
E:Unable to mount '/cache'
E:Unable to mount '/cache'
E:TWFunc::Copy_Log -- Can't open destination lo
E:Unable to mount '/cache'
Starting ADB sideload feature...
Installing '/data/media/0/sideload.zip
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
WRONG OPERATION!
E:Error executing updater binary in zip'data/
I am at a complete loss as what to do now. I've been at this for 3 hours now and its driving me crazy. PLEASE HELP!
Can anyone walk me through the steps of pushing the hboot zip via adb sideload?
Will adb sideload not work if my fastboot is locked?
I tried to follow this tutorial to go back to stock because I S-OFF'd moonshine
http://forum.xda-developers.com/showthread.php?t=2293919
My issue is trying to copy the lock bootloader zip file to my phone. Adb sideload is not working, there is no OS since I did the "fastboot oem lock" wiped my phone.
I tried to do a restore in TRWP but after it finished, when starting its stuck on the CM splash screen.
Please help.......................
sideshow9090 said:
I tried to follow this tutorial to go back to stock because I S-OFF'd moonshine
http://forum.xda-developers.com/showthread.php?t=2293919
My issue is trying to copy the lock bootloader zip file to my phone. Adb sideload is not working, there is no OS since I did the "fastboot oem lock" wiped my phone.
I tried to do a restore in TRWP but after it finished, when starting its stuck on the CM splash screen.
Please help.......................
Click to expand...
Click to collapse
There use to be a command you could enter to lock it. I would message phaded and ask him for the command sense the zip isn't working.
sideshow9090 said:
Hi All,
Sometime ago I was able to install android 4.3 using the moonshine method. After sometime, I decided to go back to stock. I followed a tutorial on how to get back to stock RUU.
-Entered Boot loader, typed in cmd prompt "fastboot oem lock" received the word that lock was successful.
-Proceeded to run the RUU executable file 1.15 but received the "158 error"
Now my phone has been wiped of any OS since I relocked the phone, but it still says "moonshine s-off".
I tried to use TWRP recovery adb sideload the proper hboot file to match the RUU but get this message
Failed
Updating partition details...
E:Unable to mount '/cache'
E:Unable to mount '/cache'
E:TWFunc::Copy_Log -- Can't open destination lo
E:Unable to mount '/cache'
Starting ADB sideload feature...
Installing '/data/media/0/sideload.zip
Checking for MD5 file...
Skipping MD5 check: no MD5 file found.
WRONG OPERATION!
E:Error executing updater binary in zip'data/
I am at a complete loss as what to do now. I've been at this for 3 hours now and its driving me crazy. PLEASE HELP!
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B32gqnbh2ZecTUk4TW5QZ1M4cFU/edit?usp=sharing
MD5: 03C6174C4C5331E84520AD7C32EB2837
download that, and then boot into fastboot usb mode, and
fastboot oem rebootRUU
fastboot flash zip SENSE_5_RUU_ROM.zip
it is essentially an RUU but in zip form
WILL WIPE DEVICE (INCLUDING SDCARD)
if this doesnt work, do an @"my xda handle" and ill come back to this
also the only way to flash firmware is through fastboot, made that clear in my instructions, if you got the download from my thread, if you didnt well... now you know lol
@.torrented
This is what I did in command prompt and my result
C:\Android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.054s]
finished. total time: 0.054s
C:\Android\sdk\platform-tools>fastboot flash zip SENSE_5_RUU_ROM.zip
sending 'zip' (920285 KB)...
OKAY [ 34.998s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 41.151s
C:\Android\sdk\platform-tools>
The phone ends up being in the black HTC screen. Am I supposed to do something after this?
sideshow9090 said:
@.torrented
This is what I did in command prompt and my result
C:\Android\sdk\platform-tools>fastboot oem rebootRUU
...
(bootloader) Start Verify: 0
OKAY [ 0.054s]
finished. total time: 0.054s
C:\Android\sdk\platform-tools>fastboot flash zip SENSE_5_RUU_ROM.zip
sending 'zip' (920285 KB)...
OKAY [ 34.998s]
writing 'zip'...
(bootloader) rom parsing start ...
(bootloader) rom parsing finish ...
(bootloader) zip header checking...
(bootloader) zip info parsing...
FAILED (remote: 22 loading zip info fail)
finished. total time: 41.151s
C:\Android\sdk\platform-tools>
The phone ends up being in the black HTC screen. Am I supposed to do something after this?
Click to expand...
Click to collapse
Also this is what my fastboot screen looks like
moonshine S-OFF
MONARUDO PVT SHIP S-OFF
CID-VZW_001
HBOOT-1.33.4444
RADIO-1.01.04.0308
OpenDSP-v6.120.274.0114
eMMC-boot
Jan 15 2013, 19:37:51:-1
FASTBOOT USB
But when I type in adb devices its just says "List of Devices Attached"
sideshow9090 said:
Also this is what my fastboot screen looks like
moonshine S-OFF
MONARUDO PVT SHIP S-OFF
CID-VZW_001
HBOOT-1.33.4444
RADIO-1.01.04.0308
OpenDSP-v6.120.274.0114
eMMC-boot
Jan 15 2013, 19:37:51:-1
FASTBOOT USB
But when I type in adb devices its just says "List of Devices Attached"
Click to expand...
Click to collapse
I am not a dev but it looks like your bootloader is locked. your cid should be all 11111 or all 222222
I goofed up, You will need to go to the bottom of my COLLECTION thread and follow the instructions posted at the bottom under the RUU LINKS section
not the .exe files
[Collection] HTC Droid DNA Firmware [RADIO][HBOOT][RUU]
@.torrent
YOU ARE THE MAN! Donation coming your way....THANKS AGAIN!
sideshow9090 said:
@.torrent
YOU ARE THE MAN! Donation coming your way....THANKS AGAIN!
Click to expand...
Click to collapse
I take it that it worked?