hi there
the usb port from my lumia 800 has broken, so i decided to do this mod :
trollingstones.net/wireless-charging-of-nokia-lumia-800-now-possible
my question is: is there any way to connect the phone to the pc and zune by wireless? And can i update the device firmware without cable?
thanks in advance
csantos87 said:
hi there
the usb port from my lumia 800 has broken, so i decided to do this mod :
trollingstones.net/wireless-charging-of-nokia-lumia-800-now-possible
my question is: is there any way to connect the phone to the pc and zune by wireless? And can i update the device firmware without cable?
thanks in advance
Click to expand...
Click to collapse
From zune, click option, there is a table labeled wireless sync. i don't know if it works havent tried it yet.
Like jc0312 said. Look for this option and then you can sync your phone with Zune when your phone is charging with cable but no in pc and has run the same wifi. Ops. but for activating this option I think you will have to plug USB first and then apply this option.
No, you can't update your firmware without cable connection to pc.
Related
I seem to have a problem with my XDA II (Dopod 696). The device won't sync via USB, but it will sync via infrared. When i plug the USB cradle/cable in, the computer complains that "USB Device not Recognized" saying that one of the USB devices attached to this computer has malfunctioned, etc..
Now the problem is, this phone comes in Chinese software. If i have to active sync via BT normally it would be fine, but i need USB support to reflash in WWE ROM to the phone.
Or has someone come out with a total solution for flashing the phone via SD card already? I have tried the ROM 1.72 bootloader but it does not work at all. My bootloader is 1.02.
THe strange thing about this all is that when loaded into bootloader mode, the phone says Serial. When i plug in the cradle/cable, the phone can recognize the connection and it changes to USB. But it is still detected as a malfunctioning device on all 4 of my computers (WinXP x2 Win2k x2).
Help, somebody!
can't you put it in bootloader usb and then run an upgrade ?
M4io said:
can't you put it in bootloader usb and then run an upgrade ?
Click to expand...
Click to collapse
no..what kind of an upgrade would run on a undetected USB connection?
Even mttyl won't work.
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Anonymous said:
So is a general SD-solution available yet? Or should I try by restoring a backup from another XDA II?
Click to expand...
Click to collapse
Solved the problem..
Believe it or not, the connector on the bottom of the XDA II had actually had 4 pins twisted down...in particular the USBDATA+ and - pins clamped to ground (i think) thank goodness the device still works.
Managed to restore them to the original position with a blade, tweezers and a very nervous 20 minutes.
Have no idea what a replacement connector would have cost locally here. Probably another bomb (or as the "generic" solution goes.. Err, sir.. We need to replace your motherboard RUBBISH!
Hi.
Firstly, sorry about my English.
I am using HTC HD2 about 6 months. I was able to connect my phone with my pc by USB. But nowadays, i can't do it.
My PC is using Windows 7 64-bit.
Now, my problem is:
When i connect USB cable, there is no notification or sound in my PC. (like "a device connected to PC" or "a new hardware found" etc.)
Phone can be charged via USB connection with PC but I can't use activesync.
Otherwise, when i connect PC and phone by Bluetooth, i can use WMDC.
I controlled "USB to PC" module in my phone. I tried "enable faster data synchronization" checked and unchecked. And i checked "Ask me first..." But there is no effect
And also, i tried it in another PC (which is Vista) and another USB Cable.
And when i shut down the device, and i open it while pressing volume down button, bootloader opened but in bootloader screen there wasn't a text like "USB". There is a text "Serial".
I make hard reset but it doesn't effect too.
What do you think about my problem? May it be about USB input of my phone?
I used to make HSPL in my phone and he has custom rom now.
If the problem is a hardware problem, is it out of warranty? :S
Please help me.
Thanks.
buraakk said:
Hi.
Firstly, sorry about my English.
I am using HTC HD2 about 6 months. I was able to connect my phone with my pc by USB. But nowadays, i can't do it.
My PC is using Windows 7 64-bit.
Now, my problem is:
When i connect USB cable, there is no notification or sound in my PC. (like "a device connected to PC" or "a new hardware found" etc.)
Phone can be charged via USB connection with PC but I can't use activesync.
Otherwise, when i connect PC and phone by Bluetooth, i can use WMDC.
I controlled "USB to PC" module in my phone. I tried "enable faster data synchronization" checked and unchecked. And i checked "Ask me first..." But there is no effect
And also, i tried it in another PC (which is Vista) and another USB Cable.
And when i shut down the device, and i open it while pressing volume down button, bootloader opened but in bootloader screen there wasn't a text like "USB". There is a text "Serial".
I make hard reset but it doesn't effect too.
What do you think about my problem? May it be about USB input of my phone?
I used to make HSPL in my phone and he has custom rom now.
If the problem is a hardware problem, is it out of warranty? :S
Please help me.
Thanks.
Click to expand...
Click to collapse
It maybe because you are using Win 7 64 bit. Try installing 32 bit as well and see if it cures your problem.
Also see http://support.microsoft.com/kb/946765
Russ
Hi.
Thank you for your attention.
Unfortunately, i tried it, too. In another PC, whose OS is Vista 32-bit. There is no sound or notification at PC
Actually, i've searched so many topics in this forum.
And i am almost sure that my problem is a hardware problem.
Because i tried so many things in settings of PC and Phone but there is no change.
I just wanna ask you, guys, if i send my phone to service, is there any problem about my phone's HSPL and Custom ROM situtation??
So the problem is hardware problem and most probably my USP Port is damaged.
Do you think they tell me that "your phone is out of warranty bec. of HSPL!" ?
Thanks.
faulty cable or faulty usb port. search out the "stuck in car kit mode" thread and compare the symptoms.
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
Hi, I need advice, today I made the root SGS2 and when you want to load custom ROM so I need to get to the phone memory. But since I can not root galaxy connect to it via usb to pc not know what to do? I tried to reinstall the drivers remove kies etc.. nothing ..
Thank you all for your advice.
What?
Aha ..
Sorry for my bad English.
so, again
Today I made a root on my Samsung galaxy s2.
Since then we can not connect the phone to the computer via usb cable.
Because I want to insert a custom ROM, you need to connect to the PC.
Therefore I would like to ask you whether you know what happened? Why can not I connect to PC via USB cable while before we root via usb cable worked.
I tried reinstalling drivers but still nothing.
xdrolloff said:
Aha ..
Sorry for my bad English.
so, again
Today I made a root on my Samsung galaxy s2.
Since then we can not connect the phone to the computer via usb cable.
Because I want to insert a custom ROM, you need to connect to the PC.
Therefore I would like to ask you whether you know what happened? Why can not I connect to PC via USB cable while before we root via usb cable worked.
I tried reinstalling drivers but still nothing.
Click to expand...
Click to collapse
Don't know about the whole pc-thing, but you can download roms directly to your phone.
And btw, opening two of the same topics is not the way to let people answer your questions faster. Next time just open one thread.
Sent from the Matrix
......and you can flash them in .zip form with cwm,or .tar form with mobile odin.So no need for pc or to talk crap.
Yes I know, but I need to download a backup from mobile to PC
xdrolloff said:
Hi, I need advice, today I made the root SGS2 and when you want to load custom ROM so I need to get to the phone memory. But since I can not root galaxy connect to it via usb to pc not know what to do? I tried to reinstall the drivers remove kies etc.. nothing ..
Thank you all for your advice.
Click to expand...
Click to collapse
Well if you want to go into usb mode...settings> (under wireless) go into more settings>usb utilities>connect to pc
Then connect your phone to the computer and remember to keep usb debugging off..
Or you can simply take your data in a mmc via card reader and put it into your internal from the mmc...
Press thanx if I helped...
Sent from my GT-I9100 using xda app-developers app
Hi
I have this problem with Lg G5
When i connect pc with usb type c cable to phone ... phone goes immediately to restart and is trying to install new firmware update , where it freeze .... only solution is to remove battery to restart it ..
I have the latest FW update thru wifi ,so no new updates here ..
I have android 7.0 software version.: V20h-231-02
I tried to change in developer mode usb setting to Charge only ,but it is not helping ...
Thanks for any help
Robert
Silly question perhaps, have you tried a different USB cable? Or a different PC? Does it restart when you use a wall charger?
It does not restart when i`m using wall charger ... and with second cable it is all ok .... So you are suggesting cable can awake firmware update ?
At first glance, I understand that your G5 would try to download updates when plugged (just like it does with app updates).
Problem is: you said it doesn't do it when plugged to an outlet and your description suggests it's not downloading an update but trying to install an already downloaded one.
Any idea which update this is? Can you check and see if it's firmware, software or native apps (LG app updates)?
If I were you I would go through all the sections in your phone's settings menu where you can check for updates of any kind, and see if there's an update ready to download or ready to install.
I had the same issue.
Enable Developer mode, and uncheck "Automatic system updates" from the Developer Options. That'll take care of it.
drhansen said:
I had the same issue.
Enable Developer mode, and uncheck "Automatic system updates" from the Developer Options. That'll take care of it.
Click to expand...
Click to collapse
This partially worked for me. If I connect it to my PC via USB, it'll still reboot to the firmware screen, but if you leave the cable in there, take out the battery and restart it, then it'll properly connect and allow file transfers. This is the Verizon version.