So I want to make a clean hard reset of my GoClever Tab R974.2 but no matter what I do it won't load the bootloader. I tried all pssible combinations of all 3 abailable buttons (power,vol+,vol-) and all possible pressing times from a few seconds to a minute.
I also tried rebooting into bootloader via the ADB but without any luck (device not recognized).
My main problem with this system is that I tried to root it and it seemed like it worked, the superuser.apk was installed, however when I tried to start Titanium backup or any other prog that requires root access, it shows that there is no root access. Then I also tried z4root, but no luck either and SuperOneClick just freezes when restaring the ADB daemon.
The tablet still works nicely but I need to root it so bad
I am at the end of my powers, please help anyone?
Here are the tab specs, maybe there's a similar tab?
Processor RockChip RK3066 1.6GHz (Cortex A9 DUAL CORE, GPU Mali400MP4)
Operating system
OS Android 4.1
Market with Apps Yes
Memory
RAM 1GB DDR3
Flash 16GB MLC NAND flash
Display
Screen 9,7" LCD IPS 1024x768
Additional info Backlight - LED. 4:3 format
Touch screen Capacitive 5-point multi-touch
Connections
Connection network Wi-Fi (802.11 b/g/n)
3G support external dongle 3G (optional)
Bluetooth No
Supported formats
Supported video files AVI, 3GP, MP4, RM, RMVB, FLV, MKV, MOV, VOB, DAT, WMV
Supported photo files JPEG/PNG/GIF(static)/BMP
Supported audio files MP3/WAV/OGG/FLAC/APE/AAC
Adobe Flash Supported
Supported eBook PDF/EPUB/TXT/FB2/PDB/RTF
Supported Office files Word, Excel, PowerPoint
File system supported FAT, FAT32, NTFS
Input/output ports
HDMI 1x miniHDMI 1.4 FullHD
Card reader 1x micro SD HC 32GB
Audio out 1x mini jack 3.5 mm
USB 1x microUSB OTG
DC port DC 2.5 mm 5V 2A
Charging by USB No
Equipped with
G-sensor 360°
Camera Front CMOS 2Mpix, back camera 2Mpix
Speakers 1x 1 Watt
Microphone Yes
GPS No
Tuner No
Transmitter FM No
Buttons Power on/off, Volume
Radio FM No
Temperature
Work temperature (0°C) 50°C
Store temperature (-10°C) 60°C
In the box
Accessories USB cable, home charger, USB Host cable
Keyboard No
Dimensions/weight
Dimensions 244x189x10 mm
Weight 660 g
Battery
Approximate web browsing work time up to 6 hours
Battery 6800mAh li-polymer 3.7V
EAN
EAN 5906736059013
can not install cwm on my cherry tablet M-1038
please can anybody help i have tried to install cwm in this tablet ihave used rk flash tool but i just get a blank screen so then i tried the generic cwm ,and used adb all seemed wel but but on reboot recovery just a blank screen and i have to reset the tablet to start it up what i di was the adb push flash_image /dev/ and then adb push recovery.img /dev/ then in root shell chmod 755 /dev/flash_image then /dev/flash_image recovery /dev/recovery.img but when itry to do this chmod 644 /devsystem/etc/install-recovery.sh it says error please can someone show me how to get cwm inthis tablet im sure its rk3066 though i could be wrong,i thought this came with stock recovery but that seems to be missing :crying:
Related
Hey Guys,
I have searched everywhere and can't seem to find a root for this device: Aocos N19 9.7 inch Android 2.3 Tablet PC Capacitive Telechips TCC8803 Cortex A8 Flash1.2GHZ 512MB/8GB
From the "About" page in the settings it has this information:
Model Number: HW type: MT8801_IL_8
Android Version: 2.3.3
Kernel Version: 2.6.35.7-tcc
Build number: V2.323
I have tried Gingerbreak (left it for over 30min in rooting screen) and SuperOneClick (remains in waiting for device, have tried troubleshooting such as turning on and off Debugging Mode".
I have scoured over "unofficial CyanogenMod7 port for RK2818 tablets" however it says that this will likely brick you device if it is not listed, which this device is not. I hope I don't sound like a noob here, and any help will be appreciated.
Tablet info:
CPU
Telechip TCC8803 Cortex A8 1.2GHZ
GPU Integrated chip
Operating System Android 2.3
RAM 512MB DDR3
Storage 8GB
Storage Other microSD(TF) up to 32GB
Camera 2.0Mp
Screen Size 9.7 inch
Screen Resolution 1024×768
Screen Type Capacitive
Screen Output HDMI
Video HD Support None
Internet Connections WIFI Flash
Wifi
802.11 b/g
3G External
GPS None
Battery 6400mAh
Music around the state About 10 hours
About the video mode About 4 hours
Video formats MKV(H.264 HP),AVI,RM/RMVB,FLV,MPEG-1,MPEG-2
Music formats MP3/WMA/APE/FLAC/AAC/AC3/WAV
Picture formats JPG/BMP/GIF/PNG
E-book formats PDF/TXT/CHM/UMD/PDB
Language Multi-language
Screen calibration Support
Clock function Support
Calendar function Support
Remote control functions None
G-sensor function Support
Transmission Interface USB 2.0
Other functions None
Anyone there? haha
try this
try with the attached superoneclick in case you can't find one from the net.
Use super manager app for root access.
Cheers.
Good luck
To root your aocos n19, you need:
-VTC Driver v4.01 for 2000 XP.exe (to install driver of your device);
-and SuperOneClick (personaly, I did it with superoneclick v2.3.3);
-your aocos n19, a PC with windows 2000 or XP and a USB cable.
First, run "VTC Driver v4.01 for2000 XP.exe" to install the driver.
Then plug your aocos n19.
Finally run superoneclick and press "root" button.
Your aocos n19 is now rooted, and if you want you can unroot it with superoneclick.
Hello guys and gals
I am not a developer and my knowledge is not that perfect but from my experiment with different x 86 Roms I have come to conclusion that when a rom starts up there is a hardware initiation that happens with in the rom instructing what hardware with what drivers should load first.
Here is the thing, I do not know how to edit the sequence of this as I have a laptop that in which the built in wifi gets initiated first then followed by the USB ports on the system.
When this happens since my laptop is the latest model running on Intel 6 Gen hardware, the built in wifi card is not supported by android M which causes me not to have a working wifi.
I have a compatible wifi usb dongle that is 100% compatible but since the system initiates the internal wifi card first, android locks into the first card initiated and ignores the wifi dongle plugged into the USB ports.
Now I need help to find out what file needs to be change in order to change the hardware Initialization order and let the Rom load up the USB ports first, and then later on search for the built in wi-fi card in order to fix this issue I have
Laptop spec and model:
XPS-9550
I7 6 Gen, 32GB Ram, Samsung 512GB Nvme SSD, 4K touch display
Do let me know
2nIce said:
Hello guys and gals
I am not a developer and my knowledge is not that perfect but from my experiment with different x 86 Roms I have come to conclusion that when a rom starts up there is a hardware initiation that happens with in the rom instructing what hardware with what drivers should load first.
Here is the thing, I do not know how to edit the sequence of this as I have a laptop that in which the built in wifi gets initiated first then followed by the USB ports on the system.
When this happens since my laptop is the latest model running on Intel 6 Gen hardware, the built in wifi card is not supported by android M which causes me not to have a working wifi.
I have a compatible wifi usb dongle that is 100% compatible but since the system initiates the internal wifi card first, android locks into the first card initiated and ignores the wifi dongle plugged into the USB ports.
Now I need help to find out what file needs to be change in order to change the hardware Initialization order and let the Rom load up the USB ports first, and then later on search for the built in wi-fi card in order to fix this issue I have
Laptop spec and model:
XPS-9550
I7 6 Gen, 32GB Ram, Samsung 512GB Nvme SSD, 4K touch display
Do let me know
Click to expand...
Click to collapse
You should be able to blacklist the module for the internal wifi; via grub or a file in /system/etc
Hi All
First time posting & hoping someone can help.
Trying to fix my sisters Nextbook.
Model - NEXT7D12F, serial - YF101292332
Issue is that the tablet is locked & she has lost the password.
Edit: tablet was purchased in New Zealand & amazon shows these specs:
Model NO. Nextbook NEXT7D12F
Operation System Andriod 4.0.3
Display Screen 7" High Light TFT (16:9)
800*480 Resolution
Capacitive Touch Panel
CPU Rockchips RK3066 Cortex A9 Dual Core
GPU ARM Mali TM-400 Quad Core Accelerated Processor
Frequency 1.6GHz
RAM DDRⅢ 1.0GB
Nand Flash 8.0GB
Micro SD/TF Card Up to 32GB(No Card Includes)
Camera Front Camera 0.3 MP
WiFi Support WiFi, 802.11b,g,n
Bluetooth Support
3G Dongle Support
Video Support 1080P AVI,3GP,MP4,RM,RMVB,FLV,MKV,MOV,VOB,WMV（License）,ASF,DAT
Audio Support MP3,WAV,WMA(License),OGG,FLAC,APE,AAC
Image Format Support 96*32pixels to 8000*8000 pixels JPEG,BMP,GIF,PNG
E-book Support PDF,Epub,TXT,FB2,PDB,RTF
Gravity Sensitivity Support
HDMI Support (Optional)
Read Speed 10-13MB,S(MLC flash)
Write Speed 5-7MB,S(MLC flash)
OTG Support Mouse,keybord,uDisk
Other Applications "Email,Clock,Calculator,Task Killer,ASTRO,Browser,Weather Forecast,
OfficeSuite, Recorder,Calendar,ApkInstall,Movie Staudio(Optional)"
Interface Micro SD Card (compatible SDHC)
USB Interface
3.5mm Earphone
Tablet has never been modified in any way.
What I've tried:
Tried to boot to recovery/bootloader to reset tablet.
Key combi power + volume up does absolutely nothing, just boots normally.
Key combi power + volume down goes to a recovery screen but it has the android with the red exclamation mark & no amount of key presses does anything.
Key combi power + both volume keys does nothing.
When tablet is at lock screen, I can connect to my pc & see the tablets sd storage.
Placed a stock rom in the sd storage & the device detected it, rebooted, installed & then restarted with no problems.
Sadly the password was still in place.
Ran android sdk tools.
When tablet is at lock screen, adb/fastboot command adb devices will not detect it even though I can access the sd storage.
When the tablet is at the recovery screen with the exclamation mark android (described above), if I enter "adb devices" adb comes back with "G82XOIPUY0 recovery"
If I issue command adb reboot recovery, it reboots back to same recovery screen whereas command adb reboot bootloader goes to a black screen & I can't tell if the tablet is on or off.
In windows device manager, when the tablet is in the recovery screen, it show as an Asus Android Device & the driver sub menu is Alcatel.
When at the lock screen, Asus Device disappears from windows device manager & NEXT7D12F appears under Portable Devices.
Thanks in advance for any & all advice.
Cheers
Sean
Hello, i have Archos 50 Diamond with stock Android 4.4.4 Kitkat:
gsmarena.com/archos_50_diamond-7042.php
archos.com/us/products/smartphones/diamond/archos_50diamond/index.html
postimg.cc/gallery/ctjgb6yk/ (images of Archos 50 Diamond internal parts and removed LCD glass, digitizer and battery)
Issue: Phone is restored to factory default, screen displays good, but is cracked in the corner and touch does not react.
My aim is to run Android app on it and be connected to the internet via WIFI or run general Linux app like SSH, rsync on any ROM that would work on the device.
So i need to somehow control the device via either USB (manufacturer says MicroUSB V2.0 support), bluetooth or via wifi (i read some apps can manage phone via wifi thanks to higher android version (maybe lolipop and up).
1.
I want to ask if i can connect USB hub with the mouse and keyboard or if there is hardware limitation. I tried to connect the mouse, but it not shown any cursor in post installation menu after boot (where one select language).
If there is a SW limitation, i found there is Android 5 Lolipop beta (blog.archos.com/en/beta-version-of-android-lollipop-for-the-archos-50-diamond/), but i am unsure if i can use that update.zip on sd card and update from sd card in stock recovery menu. (from the article they speak about internal storage)
2.
Next question is if i can use some "update from SD card" package that would enable ADB and USB debug mode or
3.
if there is any ROM for this phone that would support connecting USB peripherals and WIFI. I found no ROM for this exact Archos phone.
4.
is there any custom recovery for this phone? i also not found any that would indicate this phone type
5.
is there any package for rooting the phone via stock recovery "update from SDcard" function?
6.
the repair of the touch function is doable by me or for low price under $50 ?
Thank You
Bell is shipping me one of their streamer devices and looking at the specs, its just a repackaged ADT-3 device with a custom Bell ROM on it.
Since all my TVs already have capable devices attached to them, this frees up the streamer for exploration and fun. I was wondering if anybody has managed to unlock the bootloader and load custom roms to this device?
Bell Streamer specs:
Size: 6.9 × 6.9 × 1.5 cm
SoC: Amlogic S905Y2-B @ 1.8 GHz
Graphics: Mali-G31 MP2 GPU
System Memory: 2 GB RAM
Storage: 8 GB
Wi-Fi: 802.11 a/n/ac, 2×2, 2.4 GHz and 5 GHz Wi-Fi
Bluetooth: 4.2
Manufacturer: Askey
ADT-3 specs:
SoC – Amlogic S905Y2 quad-core Arm Cortex-A53 processor @ 1.8 GHz with an Arm Mali-G31 MP2 GPU
System Memory – 2GB RAM
Storage – 8GB eMMC flash
Video Output – HDMI 2.1 port up to 4K Ultra HD resolution @ 60 Hz
Connectivity – 802.11ac (2.4GHz / 5GHz) 2T2R WiFi 5 and Bluetooth 4.2 classic+LE
USB – 1x Micro USB port
Misc – Bluetooth Pairing / Recovery Button, red/green status indicator
Power Supply – 5V/1A via micro USB port
Dimensions – 69 x 69 x 15 mm (W x D x H)
Weight – 50 g
Hello
They send me one for free and i tried installing ADT-3 Stock ROM after reading Bell Terms of service and ended up bricking it
I tried using Amlogic tools to unbrick it but i unfortunately the board is Password protected since the Frederic exploit.
I have currently wiped all partitions to make the processor (Amlogic S905Y2) look for SD and USB Boot devices. which it is now doing.
Serial output:
G12A:BL:0253b8:61aa2d;FEAT:F2F939B2:32060;POC:F;RCY:0;EMMC:0;READ:0;CHK:1F;READ:0;CHK:1F;READ:0;CHK:1F;SD?:20000;USB:8;
Click to expand...
Click to collapse
I'm currently searching docs / forums to read to get a better grasp on the required images and bins to make a Bootable USB for this device.
If you are wondering how i'am getting USB Drive on that device i'am just using a OTG Converter and using an modified HUB To inject current in the device, you can basically achieve the same by cutting the USB Lead and injecting voltage.
I will keep this thread up to date if manage to unbrick it a flash custom ROM on the device.
justbendev said:
I have currently wiped all partitions to make the processor (Amlogic S905Y2) look for SD and USB Boot devices. which it is now doing.
Serial output:
G12A:BL:0253b8:61aa2d;FEAT:F2F939B2:32060;POC:F;RCY:0;EMMC:0;READ:0;CHK:1F;READ:0;CHK:1F;READ:0;CHK:1F;SD?:20000;USB:8;
Click to expand...
Click to collapse
I'm currently searching docs / forums to read to get a better grasp on the required images and bins to make a Bootable USB for this device.
Click to expand...
Click to collapse
The ADT-3 uses an unencrypted bootloader. The Bell Streamer doesn't. The device is looking for the encrypted Bell Streamer bootloader, but in this bootrom mode it will only look on the emmc or a sd card. As far as I know, at this stage, it can't boot directly from USB. If you discover otherwise, please let us all know.
The reference to USB that you see in the above string is for a bootrom worldcup usb connection. As you noted, this mode can't be used for much if it is password protected.