Related
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Newbieshwa said:
So I have recently Flashed ARCTIC ROM and it all went bad, was stuck and bootloop and forgot to flash CWM recovery, so only had access to Motorola Recovery. After lots of research and time I managed to fix my phone here is how:
PLEAS BE AWARE: This is for GSM Droid Razr XT910, if you are using a CDMA Razr, you will need a different Fastboot file.
Download this fastboot file on your pc & extract the file:
http://sbf.droid-developers.org/umts...stboot.xml.zip
Then download RSD lite from here & install it on your pc:
https://www.box.com/...6p1ll45svunalr3
Install moto drivers on your pc here it is:
https://www.box.com/...it95qz8yjunedrg
*********************
Now open the Rsd lite on pc, browse an XML file that you extracted from fastboot files and put it on rsd,
Turn of your phone, click on vol- vol+ & power buttons at the same time, now you entered to boot menu,
Select Ap fastboot (vol- to scroll & vol+ to select)
Then connect phone to the pc via usb port,
When you see "connected" in rsd lite, click on start key on rsd & be patient to flashing fastboot files, it takes about 7-8 minutes. If you get an error, it means you have the wrong fastboot file, you must have the original fastboot file you had on your phone, ie UK must flash UK fastboot, EU must flash EU version etc.
Thank you zeidof for all your help, who told me how to do this!
Click to expand...
Click to collapse
loooool, nice copy/paste
you are welcome
Sent from my XT910 using Tapatalk
Thank you very much sirs above, your post will hopefully fix my problems with my phone. I will try it, and write here.
Thanks
PS: Could you fix the links? They don't work.
It worked, that's awesome. Thank you a lot.
Is there a way to get The Arctic on to your phone without this happening? Or why did that happen to me?
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
dewage said:
Thanks for your nice guide, I am new to motirola and i wanted to flash a custom rom but how I choose correct fast boot file and CMR. boot loader unlock etc.I am from Saudi Arabia
Android version-2.3.5
B band - U_03.1C.85P
Build no.-6.5.1.73
System - 6.5.1.21.XT910.ME
Click to expand...
Click to collapse
i bricked my phone revcently...even i need the corect stock rom..can any one give me the link to me retail phone ie middle east????
bricked
anyone know where I can purchase the charger needed to charge my droid razr after bricking and battery dying while restoring via RSD? see picture attached
the fastboot link is not working for me
rahulwadhwani said:
the fastboot link is not working for me
Click to expand...
Click to collapse
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
for people looking for fastboot to use in the guide above:
http://forum.xda-developers.com/showthread.php?t=1362956
How about mac users? I think the do not need drivers right?
If you use safestrap recovery you have a better chance of not bricking your phone. It works awesome and recommend to anybody who flashes roms a lot. Im not too sure if it works for xt910, but it works awesome on my xt912.
http://forum.xda-developers.com/showthread.php?t=1391900
Sent from my DROID RAZR using XDA
zeidof said:
Whatz your current rom?
Which fastboot u wanna install?
Sliced by my Razr on Tapatalk
Click to expand...
Click to collapse
My current ROM is Cynogenmod 9.0 4.0.3 and I wanna downgrade back to 2.3.6 I don't know how to do that. I am badly stuck
I tried to download the tools and every link said 404 not found.... any help with this ?
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
ZolaSlo said:
My RSD Lite only supports .sbf, shx and hs files, no XML files that are in fastboot zip. Wrong version of RSD Lite or am I missing something?
br Zola
Click to expand...
Click to collapse
Are you using RSD 5.7? 5.6+ Should work fine.
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
What a life saver man....thanx a lot
Syriochan said:
Thanks for all the stuff but: If i'm stuck at the Dual core technology screen, how can i turn my device off?
Click to expand...
Click to collapse
Hold the -Vol and the power button to force the device off.
now i am back to stock unrooted os. If i root my phone again will i still be able to get the forthcoming official update this month for my RAZR XT910?
Hi Moto guys
I bought this RAZR. It is a GSM one without operator customizing.
I rooted it normally and tried to update to ICS leak (this one if I remember well).
It didn't work.
Anyway I downgrade back to Gingerbread and tried to flash in recovery the MIUI V4 zip.
It bootlooped.
So I wanted by the same way to downgrade to 2.3.6 again.
It was a fail.
From this, I had the flash failure screen at the beginning and lost the recovery.
Because of a "Battery Low" I made a factory cable and I can access again to the "flash failure" screen.
I found a tuto relating to the same problem than me and tried to apply it.
I downloaded this rom (SPDREM_U_01.6.5.1-167_SPU-15-M2-1-DE_1C.91P_0A.6C_TMDE_CFC_HWp2b_SIGNED.xml.zip) as explained and tried to flash it in RSD lite.
The problem is:
I have no error message, it just stays stuck on "6/11 flash system "system_signed".
I let it several hours, it never passed away this step.
With "Eternityprj_Fla**** script it's the same, it's blocked at "system writing..."
I don't really know if I'm considered to be on ICS or GB. My bootloader version is 0A.75 so I guess ICS one.
Any idea to reanimate this XT910?
Thanks for the help you could bring to me
P.S: I tried these roms since the first fail
-SPDREM_U_01.6.5.1-167_SPU-15-M2-1-DE_1C.91P_0A.6C_TMDE_CFC_HWp2b_SIGNED.zip
-SPDREM_U_01.6.5.1-167_SPU-15-M2-1-FR_SIGNEuropeAustraliaEMEA_USASPDRRTFR_HWp2b_Service1FF_fastboot.xml.zip
-SPDREM_U_01.6.5.1-73_SPU-11-PASS-10_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
-SPDREM_U_01.6.5.1-167_SPU-15-M2-3_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
Since I use XP in a VIRTUALBOX machine, I have an icon with activity on device.
During this operation, the activity on the phone is important
C:\Program Files\Android\android-sdk\platform-tools>fastboot.exe flash system sy
stem.img
sending 'system' (793344 KB)...
OKAY [ 28.541s]
Click to expand...
Click to collapse
As it is to this step, no activity...
writing 'system'...
Click to expand...
Click to collapse
I tried with normal fastboot executable from SDK and erpj-fastboot.exe, no difference.
Is it possible I make something wrong with my factory cable?
I don't think so because it makes my phone booting as I plug it and it writes normally boot.img for example with fastboot.
Your help would be appreciated very much guys ^^
Thanks!
Solved!
I can't explain why but I managed to access recovery even if system flash with fastboot never ended.
I flashed ICS rom and it booted well.
So it's solved even if I can't give explanations.
Thanks anyway.
flash fails...repeatedly
This has been covered extensively, but mine is still screwed up, i rooted the phone with clockwork mod. When the official ICS cam eout, i tried to manually download it. I have unrooted the phone and tried to install ics, it failed. So i tried flashing back to factory because clockwork was still popping up on boot. The flash continues to fail. I have tried using moto-fastboot in command prompt, i ha tried rsd lite with the flash(4 different ones). It keeps failing and i end up in the ap fastboot mode. it takes 2 tries to get the phone to boot normally and occasionally the clockwork boot menu pops up on reboot. Any ideas how to just start from scratch. As seen by the problems i have caused myself, i am a complete amateur here.
A little info, the phone is about 8 months old, rooted it once successfully, it is currently unrooted(i tried to reroot but got hung up in ap fastboot), updated drivers twice, moved the flash files all arounf my computer, using windows 7 64 bit. thanks to anyone who may help
Ok ok ok...
if i have an advice, before flashing, read read & read again.
So now.
Give me more info about your phone(xt910 / xt912 / europe / asia / latam /usa ) ??
Can you rsd to system_signed, or flash it manually through fastboot ?
When you installed ics manually which error did you have?
If you can, try to flash system_signed then reflash the OTA package with official recovery & wipe data. But i guess it wont work. For now i can't help you more without more info.
So tell me all you can and write it clear.
Or try this through rsd lite or fla**** http://forum.xda-developers.com/showthread.php?p=28199183
Sent from my XT910 using xda premium
yes, now ics fastboot file is out, you can easily fastboot to get back.
it is usa...i am downloading the ics fastboot now. I have tried the fastboot method with the latest gingerbread build, and also using the command prompt and flash commands....will let you know
thanks
Flash failed right away....how do i know i have the correct drivers? any other ideas?
I had the same issue when attempting to flash. Make sure you switch to a usb 2.0 port.
After that find the moto-fastboot package and then flash all the files manually using moto-fastboot instead of regular fastboot.
You have to do that for every single file. The file names are in the xml in the fastboot file.
Hi,
I was trying to install Cyanogenmod on my phone using the guide on the cyanogenmod wiki (I can't post the link, but it's the first google result for Motorola Atrix 4G: Full Update Guide)
I did everything in the guide, up to the point where I was supposed to flash the ROM onto my phone using RSD, but then it failed and gave me a "Error switching phone to BP Pass through mode". I unplugged it from the computer, took out the battery put it back in, and now it's giving me the
"Failed to boot 0x1000
No OS detected, going to RSD mode
in 5 seconds
...
..."
Menu. When plug my computer back in, and try to flash the same ROM using RSD Lite again, it says "Failed Flashing Process: Unable to retrieve interface handle". How do I fix this? I've never unlocked or rooted my phone or anything before. It was completely stock before I tried to do this.
Also, when trying to use fastboot and typing in fastboot oem unlock, it's just stuck on <waiting for device>
You tried to rsd a flashable rom on a locked bootloader phone. Your first error. You will need to rsd back to stock first. Then you need to root the phone. Then You need to follow the steps in the guide here http://forum.xda-developers.com/showthread.php?t=1202883 or here http://forum.xda-developers.com/showthread.php?t=1182871 (the second one I used recently). Once you've done that stuff THEN you can flash cm thru recovery. Hope you didn't hard brick.
pre4speed said:
You tried to rsd a flashable rom on a locked bootloader phone. Your first error. You will need to rsd back to stock first. Then you need to root the phone. Then You need to follow the steps in the guide here http://forum.xda-developers.com/showthread.php?t=1202883 or here http://forum.xda-developers.com/showthread.php?t=1182871 (the second one I used recently). Once you've done that stuff THEN you can flash cm thru recovery. Hope you didn't hard brick.
Click to expand...
Click to collapse
Thanks for your help, but could you be more specific on how to do all of that? As you can tell, I'm (quite obviously) a noob at this.
Also: I downloaded a file called 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012 , which is supposed to be the stock ROM. But when I run RSD, it gives me the error "Failed Flashing Process: Unable to retrieve interface handle (0x7027)
EDIT:: Your second link worked! Thank you very much!
Don't worry about it, it is common. All you need is the small unlock RSD file for your device found in post # 1136261 and the attempted flash that fails in the step that you described. Then you need to move on to the next step in the process. You need to get the phone into fastboot though, by holding the volume down key during the boot up / or if you get that crazy menu with options 0 though 9, use the volume up and down to select fastboot. Then on the PC continue with the process:
fastboot oem unlock
Then when that is successful, flash recovery.img or whatever recovery you have downloaded:
fastboot flash recovery recovery.img
Sent from my MB860 using Tapatalk 2
MCDong said:
Thanks for your help, but could you be more specific on how to do all of that? As you can tell, I'm (quite obviously) a noob at this.
Also: I downloaded a file called 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012 , which is supposed to be the stock ROM. But when I run RSD, it gives me the error "Failed Flashing Process: Unable to retrieve interface handle (0x7027)
EDIT:: Your second link worked! Thank you very much!
Click to expand...
Click to collapse
You're welcome!
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
19lilsaiNt68 said:
Ive been finding a solution to unbrick my xt909...,
at first Ive thought that I can flash my device with a xt910 firmware but it came out that Ive bricked my phone
flash failure/boot failure and cannot even access to recovery mode
Here's what I did:
using RSD Lite I flash the device with an empty radio.img to rid out the boot failure and again flash my device using the droid razr utility 1.7
with 6.16.211..., it came out to be successful and now I can manage to boot my device recovery mode...
but... My problem is when everytime I update my device with any 6.16.211 update.zip I get a "signature verification failed"
Help here please
Click to expand...
Click to collapse
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
xt909 completely unbricked
pastorbennett said:
I don't know if this is a silly question or not, but did the md5 match before trying to flash the fastboot file?
Click to expand...
Click to collapse
I really dont know..., but as for now Ive managed to unbrick my xt909 by erasing my CID and flashing another boot image and rom ^^
perfectly running at ICS 4.0.4
I'll post the steps soon....
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
here are the steps
TheBoris said:
Nice :good:
Whirleyes bricked his Razr XT909 too
Maybe this would help him
Click to expand...
Click to collapse
atleast 80% battery
droid rarz utility 1.7
rsd lite
fastboot.exe or any fastboot command line tool
and some patience :laugh:
1st - extract droid razr utility and find the mbmloader named " allow-mbmloader-flashing-mbm"
2nd - enter fastboot and flash the mbm... here's how
( fastboot.exe flash mbmloader allow-mbmloader-flashing-mbm.bin)
3rd - reboot
( fastboot.exe reboot-bootloader)
4th - erase the Contact I.D No.
(fastboot.exe erase cid) (fastboot.exe reboot-bootloader)
of course with a erased CID you'll never be able to turn on your phone into normal mode but still can gain access to fastboot
5th - download and flash the XT912 fastboot file
HTML:
http://sbf.droid-developers.org/cdma_spyder/VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml.zip
6th - just wait and have some coffee
and youre done...,
PLS READ​
The only way to power up your phone is by entering BP TOOLS
ONE MORE THING​
NOW YOUR XT909 can read local sim's CHEERS FOR THIS
because Im from the philippines and I use locak prepaid sim
Thanks.. It work for me too.
I have flash this file before, but I forgot to boot with bp-tools, that's why I only got black screen
I'm glad for you :thumbup:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
is there any way I can flash a new CID? because I forgot to backup my CID...,
so every time I want to open up my device I always go to into BP TOOLS
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
can you pls teach me how to do that?
Thanks to whirleyes for his boot manager..., now I no longer need to go to BP TOOL everytime I want to turn on my phone
can i try it to xt9010??
whirleyes said:
Found another way to restore my phone using china xt910 fastboot.
No more booting by bp-tools, no more fear of soft-brick
Click to expand...
Click to collapse
Could you tell me how to do this?
XT909 flash XT910 fastboot file,I think It doesn't work on CDMA net,
Did your work OK?
hi,brother.may i know your prepaid sim card is what?cdma or gsm? thx
could u help me?
hi,19lilsaiNt68.
I have a KDDI IS12M cellphone just like you. And I also bricked it.
In your way,I tried to flash the file "allow-mbmloader-flashing-mbm.bin", but I got a error message said:" INFOimage bigger than partition / Failed". However, the command "fastboot flash mbm allow-mbmloader-flashing-mbm.bin " Can be executed.Then I erased my CID and I tried to flash XT912 fastboot file. In this step:"flash devtree",the screen showed the message:validation failure.
That is my biggest problem and now I don't know how to fix it. Could you help me? Thanks a lot!
Help
HSD-Pilot said:
No, you're stuck now with BP Tools. You can install BM and set the custom init to boot without BP Tools.
Click to expand...
Click to collapse
Hi, do i need to format my CID is there no way of get a backup, i have done alot on my device that am even i tired. The fast boot also gives the same error " INFOimage bigger than partition / Failed", Can someone just walk us through.
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
wk4life said:
i erased my cid and fastboot with the VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml it worked now am out of fastboot mode, but i get a boot loop. help me
Click to expand...
Click to collapse
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
dtrail1 said:
Are you Encode from twit?
The problem is you flashed an ICS Rom. Try that first:
Boot into stock recovery and perform a factory reset. If it boots, ok. If it doesn't boot you should flash Jelly Bean. Just grab that one from VZW at sbf.droid-developers.org.
DON'T FLASH EU JB! Otherwise you won't be able to DOWNGRADE or switch to another region rom because it has the highest secure version compared to all others.
This is VZW JB: http://sbf.droid-developers.org/cdma_spyder/cdma_spyder_9.8.2O-72_VZW-16_1ff.xml.zip
Click to expand...
Click to collapse
That is what i am currently using and i am getting the boot loop back, Yeah this @EnCode_1
hello guys i know there is a lot of thread speaking about solve this problem but i guess mine need some helps from your do this is what i have ben done
phone get stuck into the moto logo
-boot loader locked i ve downloaded the 4547-fix-try2.sbf to unlocked the boot loader whit rsd lite (using rsd lite 5.7)
-get the unlocked
-downloades this 2
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz
flash whit rsd lite but the 2 said the same thing failed to boot 1
any ideas
I hope you didn't flash them like this? You did remember to uncompress them?
no i already after downloaded it i uncompressed them them i loaded to rds lite to begin the process any idea to solve my problem?
luismrosa said:
no i already after downloaded it i uncompressed them them i loaded to rds lite to begin the process any idea to solve my problem?
Click to expand...
Click to collapse
1. Why didn't you just flash the unlocking sbf? Why did you have to flash a stock sbf?
2. What version of GB were you on?
Sent from my MB860 using xda app-developers app
first of all the phone was gifted to me and i don't really know what version of android was installed i just flsh the sbf according i was reading on the internet so i decide to flash it back to stock cause the phone at the first time just not boot it get stuck at moto logo , try to go to android recovery but it didnt get to it so i decide to flash a stock sbf when i flashed whit rsd lite 5.7 the phone i got the phone message failure to boot 1, before that i ve unlocked the bootloader and in order to boot whit the unlocked message in the phone and the way to to enter to the oders option like fastboot, rds, android recover , cause when i get the failure to boot 1 i couldn't to go to any of that option just rds when it say failure to boot 1 and fastboot ............ anyway it any procedure o sbf o else to get the phone back to stock o flash a custom rom that work
luismrosa said:
first of all the phone was gifted to me and i don't really know what version of android was installed i just flsh the sbf according i was reading on the internet so i decide to flash it back to stock cause the phone at the first time just not boot it get stuck at moto logo , try to go to android recovery but it didnt get to it so i decide to flash a stock sbf when i flashed whit rsd lite 5.7 the phone i got the phone message failure to boot 1, before that i ve unlocked the bootloader and in order to boot whit the unlocked message in the phone and the way to to enter to the oders option like fastboot, rds, android recover , cause when i get the failure to boot 1 i couldn't to go to any of that option just rds when it say failure to boot 1 and fastboot ............ anyway it any procedure o sbf o else to get the phone back to stock o flash a custom rom that work
Click to expand...
Click to collapse
flashing a sbf is the only way to return to stock. Fruitcake ROMs are stock ROMs that are flashed like a normal ROM. Which sbf did you flash?
Generally, failure to boot 1 puts you in rsd mode automatically. Flash the pudding sbf and then follow up with fastboot oem unlock. You should be good to go.
Sent from my MB860 using xda app-developers app
ok i ve flashed the 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz when i flash the sbf whrn the phone restart i get this on the rsd lite failed flashing process.phone [0000]:error switching phone to BP past through mode [0x70BE]
BTW i have oem unlock the bootloader via fastboot when the starts it said unlocked so what next now
luismrosa said:
ok i ve flashed the 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf.gz when i flash the sbf whrn the phone restart i get this on the rsd lite failed flashing process.phone [0000]:error switching phone to BP past through mode [0x70BE]
BTW i have oem unlock the bootloader via fastboot when the starts it said unlocked so what next now
Click to expand...
Click to collapse
Off hand i don't know what that error means, but a simple google search will give you the answer. If you already are unlocked, then you can flash a custom recovery and a fruitcake ROM to get you back to stock without actually flashing the sbf.
Sent from my MB860 using xda app-developers app
i right now flashed whit rds lite 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but i still getting the failure boot 1 them i ran the automatic to unlocked the boot loader again the phone reboot then it stay in moto logo and unlocked message nothing more it do
luismrosa said:
i right now flashed whit rds lite 1FF-olympus-user-2.3.6-4.5.141-111212-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P012.sbf but i still getting the failure boot 1 them i ran the automatic to unlocked the boot loader again the phone reboot then it stay in moto logo and unlocked message nothing more it do
Click to expand...
Click to collapse
Have you flashed a custom recovery via fastboot?
Sent from my MB860 using xda app-developers app
yess i try that but when i try to loaded rebooting the phone a entering to the android recovery it stay freeze dont do anything
How do you flashed recovery?
Enviado desde mi MB860
simple i ve flashed it via fastboot ive done via adb android sdk fastboot erase recovery and fastboot flash recovery name then when i try to enter to the android recovery it just stay freeze or reboot
Ok, then what recovery did you flash?
To be on the safe side, if it wasn't RomRacer's CWM, you should try with that.
ok i will try that one BTW is necessary that the battery is full charge
No, but is highly recommended
Enviado desde mi MB860
i still getting the failed to boot 1 after the sbf for att was flash after that y flash the 4547-fix-try2.sbf to unlocked the bootloader for take of the failed to boot 1 but the phone after that it reboots an stay ther freezee
luismrosa said:
i still getting the failed to boot 1 after the sbf for att was flash after that y flash the 4547-fix-try2.sbf to unlocked the bootloader for take of the failed to boot 1 but the phone after that it reboots an stay ther freezee
Click to expand...
Click to collapse
ok, the full sbf returns the phone to stock. the fix sbf opens the door to unlock the bootloader. after that you need to get into fastboot and run the command "fastboot oem unlock" without quotation marks. a code will pop up on your screen. re-enter the command, followed by the code, and hit enter.
ok after that the phone turns on whit the unlocked message but still frezze in the M logo
luismrosa said:
ok after that the phone turns on whit the unlocked message but still frezze in the M logo
Click to expand...
Click to collapse
Reaching out to everyone else on this post, but after we did the sbf and fastboot command, didn't we boot up normally? Is there something i'm missing here to help this user out?
Sent from my DROIDX using xda app-developers app