Kernel Features:
Based on Sony Latest Source Code: 6.1.1.B.1.54 / .56 / .75/ 6.2.A.0.400.
Based on Linux Kernel Source Code: 3.0.78. (JellyBean kernel is still 3.0.08)
Compiled Using Linaro 4.7
FXP Recovery
Init.d Support.
Auto Root.
Auto Install for Wi-Fi Modules.
Good Battery Life.
NTFS Support
CIFS Support
Clean-Cache Support
ext 2 / 3 / 4 Support.
Kernel Image Compressed Using LZO.
Governors:
Conservative
Dynamic Interactive
HotPlug
HotPlugX
Interactive
InteractiveX
Lazy
Lionheart
LulzActiveq
MinMax
Nightmare
onDemand
onDemandX
onDemandQ
Pegasusq
Powersave
Performance
Scary
Sakuractive
SmarassV2
Userspace
Wheatley
IO schedulers:
VR
SIO
Row
Zen
Deadline
CFQ
--------------------------------------------------------------------------------------------
Things you MUST know about:
None so far
--------------------------------------------------------------------------------------------
Recommended Governor - I/O Schduler for best performance and battery life.
You tell me, I can't make the decision since i don't own the device.
--------------------------------------------------------------------------------------------
Recommended For All Users:
To get better graphics score for 2D graphics, go to: Settings -> Developer Options -> Force GPU 2D Rendering
I used to get 270 in benchmarking score for 2D Graphics, but after enabling it, I started getting above 970 (That was the case on Xperia P)
--------------------------------------------------------------------------------------------
Known Issues:
Auto Root script is not working so I had to remove it from the kernel for now, please refer to 2nd post for rooting
--------------------------------------------------------------------------------------------
Credits:
Thanks To Sony for: Kernel Source Code.
Thanks To @DooMLoRD for: Auto Root Script & Init.d Enabler Script.
Thanks To @matood for: Helping me in testing.
Special Thanks To @FXP For The Source Code.
Special Thanks To @alivanov79 For His Ramdisk.
--------------------------------------------------------------------------------------------
Always Remember:
Please Don't mirror my files, I like to keep track of download count.
Report Bugs in this thread and I will fix them as soon as possible.
If you like my kernel please rate it
If you like my work and would like to support me ( Here ) I appreciate it
--------------------------------------------------------------------------------------------
Change Log in Second Post:
--------------------------------------------------------------------------------------------
Download Link: (Clearing Cache and Dalvik-Cache recommended)
Download & Change Log (CM & Stock)
--------------------------------------------------------------------------------------------
Old Releases:
Sliding_XSola v2 STOCK ROMS
Sliding_XSola v2 CM ROMS
--------------------------------------------------------------------------------------------
How To Flash
fastboot flash boot name_of_file_you_downloaded.img
You need an unlocked bootloader to use this kernel
--------------------------------------------------------------------------------------------
Sources: Github
Rooting Your Device:
Flash this via CWM and your device will be rooted
Only flash the file above if your device is not rooted
The file linked above is for the SuperSU app by Chainfire.
------------------------------------------------------------------------------------------------
Change Log:
------------------------------------------------
[9-4-2013] Version 3.3
------------------------------------------------------------------------------------------------
Fixed remaining bugs.
Improve performance.
Improve battery life.
------------------------------------------------------------------------------------------------
[5-4-2013] Version 3.2
------------------------------------------------------------------------------------------------
Added new governors: OnDemandQ - Hotplug (got it from a different source) -
InteractiveTest (it's the same as InteractiveX but got it from a different source,
please test it and tell me if it's better than the already included interactiveX)
Some under the hood changes
------------------------------------------------------------------------------------------------
[29/3/2013] Version 3.1:
Added Nightmare and Lulzactiveq governors.
Updated to latest Linux Kernel Source Code: 3.0.71.
Fix current issues.
------------------------------------------------------------------------------------------------
[27/3/2013] Version 3:
Compiled Using Linaro 4.7
Updated to latest Linux Kernel Source Code: 3.0.70.
Fix current issues.
------------------------------------------------------------------------------------------------
[25/3/2013] Version 2:
Added all missing functions in OP.
Few more modifications for better performance.
------------------------------------------------------------------------------------------------
[23/3/2013] Version 1:
Initial Release.
------------------------------------------------------------------------------------------------
Hello,
Why the hurry? And that in fact there is now included?
OmgGG said:
Hello,
Why the hurry? And that in fact there is now included?
Click to expand...
Click to collapse
I'm sorry but I don't really understand what you mean over here :-/
You write this:
not all of them maybe included but I will be making sure all of them are included by tomorrow
Click to expand...
Click to collapse
Not all features included now, rigth? What we have now included to your kernel?
Sorry for google translate
OmgGG said:
You write this:
Not all features included now, rigth? What we have now included to your kernel?
Sorry for google translate
Click to expand...
Click to collapse
Actually only the ext2 & ext3 & NTFS & CIFS support are not included, but all other stuff that improves performance and battery life are already included
Thanks, good kernel fast smooth without overclock. Wait v2.
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
It feels so nice that we now have your kernel for our sola! I saw at xu thread and I was so jeallus
I don't have much free time these days and I'm on cm9, so I won't be able to test your stock kernel.. :/ I'm sure it will rull though! Thanks for your efforts!
PS: will you develop a kernel for cm9 like with xu?
Sent from my Xperia Sola using xda premium
seems legit... i know your work in xP and this is what i wish!!
OH THANKS FOR MAKING THIS KERNEL WORKING ON SOLAAAAAAAAA~
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
Plz add cwm recovery v5.5
Sent from my MT27i using Tapatalk 2
Really great work DEV, 3 days ago i was ready to PM you to make your kernel for CM for Sola, now i am impatiently waiting for your CM kernel to test. Thank you very much.
EDIT: I will be very happy if you implement InteractiveX instead of interactive in you CM Kernel.
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
After couple of hours usage still buttery smooth, battery seems to be very good and overall stable, fast and batt friendly.
Thanks again
Sent from my MT27i using xda app-developers app
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
mirost1 said:
Really great work DEV, 3 days ago i was ready to PM you to make your kernel for CM for Sola, now i am impatiently waiting for your CM kernel to test. Thank you very much.
EDIT: I will be very happy if you implement InteractiveX instead of interactive in you CM Kernel.
Click to expand...
Click to collapse
+1
Sent from my Xperia Sola using xda premium
Happy to see users are satisfied with this kernel, this means a lot to me
By the way for those who asked me to make a CM kernel, please send me latest FXP kernel and I will make one for CM roms
DeepUnknown said:
Happy to see users are satisfied with this kernel, this means a lot to me
By the way for those who asked me to make a CM kernel, please send me latest FXP kernel and I will make one for CM roms
Click to expand...
Click to collapse
download here...
Some suggestions:
1) Make 2 versions of the kernel, one with oc , one without
2) Add more governors and schedulers
itachilinux said:
download here...
Click to expand...
Click to collapse
Thanks I will be working on it once I'm back home
Mokiwipeout said:
Some suggestions:
1) Make 2 versions of the kernel, one with oc , one without
2) Add more governors and schedulers
Click to expand...
Click to collapse
There are additional governors and IO schedulers in this kernel, unless there are some I'm missing that you know about, it would be great if you give me names.
As for overclocking there is NO WAY I will be adding them no matter what, I bricked my Xperia P just by overclocking it to 1.2GHz I don't want to risk other's devices, even if it will not brick another device, but losing my device is enough, if some of my kernel users bricked their device because of overclocking I'm not going to take any responsibility + I know what it feels like having a bricked device. Not to mention so far I found users are extremely happy with the performance they got from this kernel, I still don't understand why you want overclocking?
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
DeepUnknown said:
Thanks I will be working on it once I'm back home
There are additional governors and IO schedulers in this kernel, unless there are some I'm missing that you know about, it would be great if you give me names.
As for overclocking there is NO WAY I will be adding them no matter what, I bricked my Xperia P just by overclocking it to 1.2GHz I don't want to risk other's devices, even if it will not brick another device, but losing my device is enough, if some of my kernel users bricked their device because of overclocking I'm not going to take any responsibility + I know what it feels like having a bricked device. Not to mention so far I found users are extremely happy with the performance they got from this kernel, I still don't understand why you want overclocking?
Click to expand...
Click to collapse
I agree with you. This kernel is like having cm installed. Sinfe yesterday evening no lag, no screen locks or something. It just fly, try and youll see. I have stock .54 firmware, debloated and fidelity for sound and cybershot for my cam. I have no other mods installed.
Finally I got very snappy phone with all the joy.
Sent from my MT27i using xda app-developers app
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
matood said:
I agree with you. This kernel is like having cm installed. Sinfe yesterday evening no lag, no screen locks or something. It just fly, try and youll see. I have stock .54 firmware, debloated and fidelity for sound and cybershot for my cam. I have no other mods installed.
Finally I got very snappy phone with all the joy.
Sent from my MT27i using xda app-developers app
Click to expand...
Click to collapse
+1!
Me either! Thanks dev
Sent from my MT27i using xda app-developers app
Re: [Kernel][Sony Xperia Sola][March - 24] Sliding_XSola [Stock]
How can I install cwm 5.5 with this kernel
Sent from my MT27i using Tapatalk 2
Related
This is Rage Kernel v2.9 for Xperia Mini / Mini Pro / Active / Live recompiled to run on FXP CM7.2.0 ROM from Freexperia Project here.
The boot image consists of kernel compiled from DuMOHsmol's Rage Kernel v2.9 source, FXP wi-fi driver and FXP ramdisk. It is tested running in FXP122 CM7.
The kernel is compiled using FXP default config, modified to enabled added features in Rage Kernel, so overall the features is similar to Rage Kernel v2.9 (see post #2 below)
Credits:
Many thanks to DuMOHsmol for Rage kernel source and DoomLord for providing the base/stock source.
Thanks for Freexperia Team for making such a great rom.
Thanks for wucinac, HUdasp, gandhar, Snoopo, & jakobxxl for initial testing and feedbacks.
This kernel will not be updated everyweek like FXP rom releases. It would only be updated if there's update in Rage Kernel or there's update in FXP ramdisk/ROM that requires changes in this kernel too.
I mainly compiled this kernel because it gives good battery life, so I haven't tested all features that Rage Kernel offer. Therefore I can't really confirm that those added features will work fine in CM7. What does work is the basic functionalities (like calls, wifi, bluetooth, camera, etc) and added cpu governors, overclocking options, and added i/o schedulers. What I haven't test: zram and swap.
And because I personally considered this kernel as some kind of a workaround for the battery drain issue in fxp kernel (see post #3 below), then if FXP team has fixed it, this kernel might be no longer needed.
As of version 2.6, changes from original Rage Kernel source are below:
4 files in Rage source replaced with files from FXP source :
- arch/arm/mach-msm/board-semc_mogami.c
- arch/arm/mach-msm/sdio_ctl.c
- drivers/mfd/marimba-codec.c
- drivers/misc/lm356x.c
Files sdio_ctl.c and marimba-codec.c is replaced to avoid compiling errors when using fxp defconfig. The file board-semc_mogami.c is replaced to fix touchscreen problem when using original file. File lm36x.c is replaced to fix force close problem in Torch app.
Another change is patch from here applied to fix the touchscreen issue.
Changes in version 2.7 are included as a patch files in the download post below.
Changes in version 2.8 & 2.9 are related only to cpufreq driver & cpu governors, so the patch from 2.7 can still be used, but the cpufreq part of the diff must be removed.
Version 2.7 / 2.8 / 2.9:
Please see all download links for Mini/Mini Pro/Active/LiveWithWalkman in this #75 post.
Flashing disclaimer applies! Use this kernel at your own risk.
How to use:
1. For the first time CM7 users: Flash the Freexperia CM7 kernel & Rom first, and make sure everything works fine, and then continue to step 2. For those that already have CM7 running, just begin at step 2.
2. Flash this kernel using fastboot.
3. Reboot to CWM and wipe cache
4. Reboot again.
Notes :
- This kernel is not supported in anyway by FXP team or original Rage maintainer DuMOHsmol. Anyone having problem, please don't ask them for support. Just ask in this thread & I'll try to figure it out.
- Battery life is not solely affected by the kernel. It can also be affected by apps/mods/tweaks used or applied in the rom. If battery drain is high, then please check what cause the wakelocks using apps like BetterBatteryStats here
- There are instances that using Google Maps or Latitude (or maybe other gps-related apps) would cause GpsLocationProvider keeping the phone awake, like the case in this post #82 and post #34. This situation can be diagnosed using that BetterBatteryStats app mentioned above. The workaround is to disable gps and reboot the phone.
- Of course, other than advantages, there are also disadvantages using this kernel in FXP cm7. Advantages including: a bit better battery life, more cpu governors, more i/o schedulers, etc. Disadvantages: I perceive sdcard i/o is somewhat slower, sometimes there's lag in video recorder, there might be broken features in future FXP releases, not supported by FXP team, and there might be other problems that haven't been encountered yet. If anyone experiencing more disadvantages than advantages using this kernel, then please consider using FXP kernel instead.
Features (quoted directly from DuMOHsmol's Rage Kernel original post here ) :
DuMOHsmol said:
This is my kernel, it's based on stock SE 4.0.2.A.0.74 kernel sources, with some things from DoomKernel by DooMLoRD (so go and say thanks to him, and other developers too).
It has:
- Overclock up to 2Ghz
- CWM Recovery 5.0.2.7
- Prerooting
- CPU Governors:
brazilianwax
smoothass
smartassV2
SavagedZen
interactiveX
lagfree
minmax
Scary
smartass
interactive
conservative
userspace
powersave
ondemand
perfomance
v2 added:
- Xperia Mini support
- Tun/tap interface enabled (VPN, ipv6)
- Swap support enabled
- Two way call recording support added
- I/O schedulers:
noop
anticipatory
deadline
cfq
bfq
vr
sio
v2.1 changed:
- disabled NFS and CIFS (battery drain fix from DoomKernel), let's see if it can really increase battery life.
v2.2 changed:
- moved to from 4.0.2.A.0.58 to 62 source, though I didn't see any changes
- added 0% battery workaround patch by Bazoocaze. I don't even know what it does but it seems to be something useful since everyone includes this in their kernels
- New cpufreq driver from DoomKernel. You can experience some problems with overclocking now (my phone becomes unstable at 1.8GHz now, instead of 2.0), but phone eats much less battery in sleep. I've also changed 1018Hz to 1024Hz and 249Hz to 245Hz because those new numbers looked wierd
v2.3 changed:
- moved back to 4.0.2.A.0.58 source (just to make sure that everything will work).
- updated version number in ramdisks to 62.
- removed 0% battery workaround patch (it's useless on our devices).
- reverted old cpufreq driver with small fix. It should be stable now and phone seems to eat less battery than in 2.1. (thanks himasura for lots of testing)
- salvaged some ram.
- enabled NTFS support.
- enabled usb-storage driver, so you don't need to manually load usb-storage.ko now.
- Version number now shows version of kernel (#23=2.3).
v2.4 changed:
- Now phone lights up blue led to show when you can enter recovery (thx to DooMLoRD).
- Minor changes in ramdisks.
- Enabled hid drivers for microsoft and a4tech.
v2.5 changed:
- Re-added CIFS
- Enabled ext4 support
- Added zram and cleancache drivers
- Added lulzactive governor
- Root fs now mounts as rw after boot.
v2.6 changed:
- removed lulzactive governor as it wasn't working properly (thx to kamarush and others for pointing that)
v2.7 changed:
- moved to sony 4.0.2.A.0.74 kernel sources (updated touchscreen driver)
- Increased GPU dedicated memory to 4MB
- Updated su binary in autoroot.
v2.8 changed:
- added new cpufreq driver at last (with CPU frequency fixup by DooMLoRD), battery drain is lower now. I left version 2.7 too for those who want higher overclock or have some problems with 2.8.
Everything else is similar to stock kernel for now.
Click to expand...
Click to collapse
A bit background:
I use FXP CM7 rom for my mini pro since release 049 and like it very much. One thing that made me keep switching back to stock rom was the high battery drain, because in my daily activities electric plug is not always readily available, so battery life is critical for me.
In fxp 052 I got a bit desperate and trying to use custom kernel based on stock from bbooff here, with fxp rom. The battery life is excellent, just like stock rom, but I encountered 2 problems: touchscreen sometimes become unresponsive and wifi was not working (even if I replaced wifi modules with stock).
Finally, I decide to learn how to compile android kernel, and I found that it is quite similar with compiling linux kernel, which I've frequently done to my computer and laptop.
So, I compiled kernels from 3 sources and compare the battery life in my mini pro. They are from DoomLord's official SE source, DuMOHsmol's Rage kernel source, and krizky82's X Kernel source. I also recompiled kernel from FXP kernel source using stock semc_mango_defconfig, to see if battery life is better. The conclusion is that best battery life is achieved using stock and Rage Kernel, and I've been using FXP with rage kernel since release 102 and haven't considered going back to stock rom again.
I posted in Rage Kernel thread to thank DuMOHsmol, and since then there's 3 xda members that ask me to share this kernel, so I make this thread.
I hope this could help those who want to use FXP CM7 and need a battery life that's close to what stock rom offer.
Note:
As of release 114/115, FXP kernel also has better power management and quite a good battery life. The power consumption difference between this rage kernel and fxp kernel is not as much as it used to be before. In case of broken features or any problem caused by using this kernel in FXP cm7 rom, then please consider using FXP kernel instead.
hi ,after flash your kernel ,my device have a boot-loop,please check it ,thank you
zhanglz0904 said:
hi ,after flash your kernel ,my device have a boot-loop,please check it ,thank you
Click to expand...
Click to collapse
Okay, I'll check it. I might zip the wrong file. What is your device? I assume it is mini / st15? Because kernel for mini pro works fine in my mango. I'll check and if needed I will re-compile it.
Edit:
I think the problem was I incidentally used wrong ramdisk for mini kernel.
I have made a new kernel for mini, but it needs testing first. So, if anyone's willing to test it, please send me a PM. Thank you...
Edit:
Fixed. Link for mini updated.
Thank you!!
Im using cyanogen fxp 111
Only need flash the kernel?
Or need make a full wipe?
edwarddd said:
Thank you!!
Im using cyanogen fxp 111
Only need flash the kernel?
Or need make a full wipe?
Click to expand...
Click to collapse
You are using mini pro, right? I'm still fixing kernel for mini.
You don't need to do a full wipe, just wipe the cache partition.
Yes im using the mini pro
Thanks!
thanks a lot.even i was switching back to stock because of the battery drain ..will try this on my mini pro today
i am using fxp111 on my st15i,thank you for your great work .
zhanglz0904 said:
i am using fxp111 on my st15i,thank you for your great work .
Click to expand...
Click to collapse
Mini kernel is fixed. Link is updated. Please test it and let me know if you encounter any more problem. Thank you for your feedback...
greenAlgae said:
Mini kernel is fixed. Link is updated. Please test it and let me know if you encounter any more problem. Thank you for your feedback...
Click to expand...
Click to collapse
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
by the way ,some of us using the rage kernel have encountered the same problem,they aslo "complained" the boot-loop ,so i think the problem is kernel itself not the the ramdisk ,i am very happy if you will fix it ,thank you much .respected your work
zhanglz0904 said:
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
Click to expand...
Click to collapse
what is the problem?
im install fixed kernel and everithing working.
no bootlop or error during boot.
zhanglz0904 said:
hi ,greenAlgae ,i am sorry to tell that i encountered the same problems with using your fixed kernel ,it may not the ramdisk,but the drivers,i think .
by the way ,some of us using the rage kernel have encountered the same problem,they aslo "complained" the boot-loop ,so i think the problem is kernel itself not the the ramdisk ,i am very happy if you will fix it ,thank you much .respected your work
Click to expand...
Click to collapse
Is there any error when you flash it using fastboot? Did you get to boot logo only or you get to cyanogen boot animation when the phone bootloop?
wucinac said:
what is the problem?
im install fixed kernel and everithing working.
no bootlop or error during boot.
Click to expand...
Click to collapse
Thank you wucinac. It seems there's some kind of inconsistencies here. Hopefully it can be worked out, else i would have to pull out the kernel for mini altogether.
Sent from my SK17i using XDA
For st15i i have to use fastboot query with flag:
Code:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
P.S. Rage flash'ed without any problems. Kudos to developer, many thanks for merging battery save and direct call record!
oh great! Let's test!
gqcJYb3UN8xSIWNUy2xX said:
For st15i i have to use fastboot query with flag:
Code:
fastboot -i 0xfce flash boot boot.img
fastboot -i 0xfce reboot
P.S. Rage flash'ed without any problems. Kudos to developer, many thanks for merging battery save and direct call record!
Click to expand...
Click to collapse
So, it does work for mini after all, right?
All credits goes to original devs. It was DuMOHsmol who added the features, so your kudos goes to him
Snoopo said:
oh great! Let's test!
Click to expand...
Click to collapse
Yes sir, please test it and kindly let me know how it goes . Any feedbacks - even negative ones - will be much appreciated
Sent from my SK17i using XDA
So long time ago i using stock rom, and rage kernel are the best, i think that are the best kernel
For stock neves restart the phone on overclock , i dont back to stock rom never thanks!!
Sorry for my bad inglish
edwarddd said:
So long time ago i using stock rom, and rage kernel are the best, i think that are the best kernel
For stock neves restart the phone on overclock , i dont back to stock rom never thanks!!
Sorry for my bad inglish
Click to expand...
Click to collapse
Well, overclocking is the feature that I very rarely use. Because I use this kernel for better battery life, and overclocking might just negated that
But I'm glad that it works for you
Sent from my SK17i using XDA
greenAlgae said:
A bit background:
I use FXP CM7 rom for my mini pro since release 049 and like it very much. One thing that made me keep switching back to stock rom was the high battery drain, because in my daily activities electric plug is not always readily available, so battery life is critical for me.
In fxp 052 I got a bit desperate and trying to use custom kernel based on stock from bbooff here, with fxp rom. The battery life is excellent, just like stock rom, but I encountered 2 problems: touchscreen sometimes become unresponsive and wifi was not working (even if I replaced wifi modules with stock).
Finally, I decide to learn how to compile android kernel, and I found that it is quite similar with compiling linux kernel, which I've frequently done to my computer and laptop.
So, I compiled kernels from 3 sources and compare the battery life in my mini pro. They are from DoomLord's official SE source, DuMOHsmol's Rage kernel source, and krizky82's X Kernel source. I also recompiled kernel from FXP kernel source using stock semc_mango_defconfig, to see if battery life is better. The conclusion is that best battery life is achieved using stock and Rage Kernel, and I've been using FXP with rage kernel since release 102 and haven't considered going back to stock rom again.
I posted in Rage Kernel thread to thank DuMOHsmol, and since then there's 3 xda members that ask me to share this kernel, so I make this thread.
I hope this could help those who want to use FXP CM7 and need a battery life that's close to what stock rom offer.
Click to expand...
Click to collapse
I have installed your kernel on my sk17i .. with FXP 111, but overclocking is set to 1024?
Here i've tried compile kernel for Neo/V users. Thanks to kormatoes for asking me to make kernel for AOKP. Then later i decided to make for Stock ICS too. Thanks to those who help me test these kernel since i've owned Xperia Ray not Xperia Neo/V
[ XNeo AOKP v1.2.431 ] AOKP BASED ROM NEW
- vids record / playback fixed
[ XNeo ICS v2.1.431 ] ICS 4.0.4 NEW
[ XNeo Kernel V2.0 ] ICS BASED ROM NEW Build from 4.1.H.0.4 kernel source for Play ICS Beta
### LOST & FOUND ###
[ XNeo ICS v1.1 Repack ] ICS based rom
[ XNeo AOKP v1.1 ] AOKP ROM
NOTE: [For stock ICS ONLY] If you come from other kernel, please flash this modules using cwm
Updates
// XNeo ICS v2.0 - 4.1.H.0.4 source, patches: ZRAM, smartassv2
// XNeo ICS v1.1 Repack - re-added Intellidemand. swap/ext4 support. tun.ko module in /res/modules
// AOKP v1.1 - added Intellidemand gov (dont use with IO vr, caused reboot when screen off)
Intellidemand:
Intellidemand aka Intelligent Ondemand from Faux is yet another governor that's based on ondemand. Unlike what some users believe, this governor is not the replacement for OC Daemon (Having different governors for sleep and awake). The original intellidemand behaves differently according to GPU usage. When GPU is really busy (gaming, maps, benchmarking, etc) intellidemand behaves like ondemand. When GPU is 'idling' (or moderately busy), intellidemand limits max frequency to a step depending on frequencies available in your device/kernel for saving battery. This is called browsing mode. We can see some 'traces' of interactive governor here. Frequency scale-up decision is made based on idling time of CPU. Lower idling time (<20%) causes CPU to scale-up from current frequency. Frequency scale-down happens at steps=5% of max frequency. (This parameter is tunable only in conservative, among the popular governors)
To sum up, this is an intelligent ondemand that enters browsing mode to limit max frequency when GPU is idling, and (exits browsing mode) behaves like ondemand when GPU is busy; to deliver performance for gaming and such. Intellidemand does not jump to highest frequency when screen is off.
Click to expand...
Click to collapse
How to make simple ZRAM init.d script
1. Using Root Explorer, got to /sytem/etc/init.d/
2. press Menu then create new file
3. paste these in it
Code:
#!/system/bin/sh
sysctl -w vm.swappiness=40
echo "1" > /sys/block/zram0/reset
echo $((50*1024*1024)) > /sys/block/zram0/disksize
mkswap /dev/block/zram0
swapon /dev/block/zram0
4. close and save it as 60ZRAM
5. set permission to 777 or "rwxrwxrwx" (tick all)
6. take note: 50*1024*1024 = 50MB zram disksize. if you want to set 30MB, change 50 to 30.
Click to expand...
Click to collapse
((( Special Thanks to )))
DooMLoRD - thanks for his github sources
FXP - for AOKP Kernel sources
Kormatoes - for let me using his thread for starting up
ThilinaC - for nice AOKP bootlogo
Tenacius D - for being XNeo AOKP tester
Mikk36 - for being XNeo ICS tester
Night Elf - for his ramdisk source
Madfysh - XNeo v2.0 tester
Click to expand...
Click to collapse
GiT
https://github.com/sirkay
Finally....
sent by tapatalk via super xperia Neo
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
I did the flash, I'm using the AOKP kormatoes, and so far everything is normal.
Click to expand...
Click to collapse
as i know 4.1.C.0.7 sources support OTG. i never test it even with ray's kernel
Sent from my ST18i using xda premium
try ask someone that success using OTG
juninromualdo said:
asked that question on the topic AOKP Neo / v was wondering if your kernel has support for USB on the go, external memory, such as pen drive. Tested with mouse and pen drive worked but I can not seem to have the appropriate drivers. From what I saw in some threads here at XDA need these drivers.
Click to expand...
Click to collapse
Just use this, OTG mass storage will work.
shardul_seth said:
Just use this, OTG mass storage will work.
Click to expand...
Click to collapse
Tested.
sent by tapatalk via super xperia Neo
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
sirkay said:
so it does work? 2-way call recording also support. check on my kernel thread in ray developement for call recording apps.
Sent from my ST18i using xda premium
Click to expand...
Click to collapse
I already test it with ur kernel. Usb otg cant work. Even i push setting for stock kernel. Its still doesnt work..
sent by tapatalk via super xperia Neo
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
How with battery life?
ZduneX25 said:
@sirkay i attempted to flash aokp version on cm9 and it stuck on bootanimation forever ;p
Click to expand...
Click to collapse
hmm wonder why coz am using FXP kernel source .. someone happened to succeed flash on cm9.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
here to check it out --> http://forum.xda-developers.com/showpost.php?p=25565382&postcount=413
he using my kernel
@sirkay well cannot provide a logcat here, cause I already changed whole rom, just wanted to let you know i was trying on cm9 fxp115
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
szymko1995 said:
How with battery life?
Click to expand...
Click to collapse
KA15 + this kernel (don't know if it's the latest build, got it from sirkay directly):
Slow charging in the end is because of simultaneous video recording and GPS logging (will get even worse now because I added automatic bluetooth enabling ).
spiritualwar said:
I just tried this kernel on my Neo V with i-scream rom. I flashed it without wiping anything but wifi wasnt working. After that i made a factory reset and get an endless bootloop.
Was sounding like a good kernel but now i will try another. Thank you for your efforts.
Click to expand...
Click to collapse
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
where can i get stock wifi module??
Sent from my MT11i using XDA
talhah sabri said:
where can i get stock wifi module??
Sent from my MT11i using XDA
Click to expand...
Click to collapse
Flash this kernel by shardul_seth Stock ICS w init.d support+root+cwm! [Final] latest version 3, boot into system turn the phone off and flash sirkay kernel.
Sipi1302 said:
I'm using this kernel on I-Scream 10 and it working good so far, the only thing you have to do is flash stock kernel with stock WiFi modules reboot and then flash back to this kernel and woala WiFi is working. That is how I did it working when crossing from NightElf kernel to this one.
Click to expand...
Click to collapse
Do you mean this module? http://forum.xda-developers.com/showthread.php?t=1609617
If yes, i have try it with nightelf kernel and aokp rom but it's not working. I haven't time yet to try it again.
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and Tim Graham(tomgus) ,champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Ported Newer Kgsl Drivers by me
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7000] Drived From Thjap's Sources:
[P7000] Swap Support
[P7000] Vr Sched
[P7000] Sio Sched
[P7000] Deadline
ect...
[P7000] bzip2 Support
[P7000] Tun Support
[P7000] Ext3 , Ext4 , NTFS File system Support
[P7000] Updated Yaffs
[P7000] Lzo , Bzip , Gzip Decompression
[P7000] OC_UV
[P7000] Optimized Cpu Freq Table
[P7000] Unlocked many Cpu Freq-Voltages
[P7000] 128-1228!!!
[P7000] Memory Optimization
[P7000] Battery Tweaks
[P7000] Speed Tweaks
Many More...
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Download Links Can be Found Here
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
THX Very much hero !! but where is 32 kernel ???
Amin` said:
Your One And Only Kernel!:victory:
First I want to Thank some pals ,Stephen(mcsqwizzs98) , Ferat And Benjamin(scritch007) who helped me a lot in different Stuffs...and champ , Achotjan...
I Released this kernel because I wanted to stay on Gb(Mooke-electra) for a while so I figured to make some kernels for Gb roms:silly: and here we go!!! This is based of Thjap's Sources...many thanks to him
Features:
Fastest , Best battery and memory! Simply Your One And Only Kernel For Cm7,SDE and Stock GB Roms...
Stock Kernel:
This Comes Later...
Click to expand...
Click to collapse
Exellent idea but cannot download, error links!!! Please adjust links!
tori_mc said:
Exellent idea but cannot download, error links!!! Please adjust links!
Click to expand...
Click to collapse
Solved!
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
silveraero said:
SDE Kernel:
- No bootimage (an old bootimage flashed then blank screen then appeared again after loaded all libs and come to bootanimation)
- No vdd????
Did you test all before posting?
BTW, fast, smooth with new ksgl, wifi works, data works
Click to expand...
Click to collapse
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Amin` said:
it has vdd..
about bootimage it's not a big deal...but I'll fix it...
I flashed my phone over 10 times yesterday to test this kernels and you ask me did I test them?
Click to expand...
Click to collapse
Just asking if you test these things mate. There is no VDD level in CPU setting in CyanogenMod Setting menu, also adb mask controller told me that vdd file dors not exist.
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
InternationalPlayer71 said:
Finally,a new kernel for SDE thanks a lot Amin...keep it up!! I will test it soon and report if it's necessary!! great job...thanks again buddy!!
Edit: well,tested...scrolling is laggier on home screen...and wifi seems to be a little lazy to connect...for example at phone startup it don't connect automatically...I have to go in settings-wifi and press connect manually! Just a little request buddy..if it's possible...can you add all other cpu governor from achotjan's kernel please?thanks a lot
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
azeez77 said:
Hey Amin not working with MM TEAM CM 7.2 | V 1.5 i mean it works boots just very laggy and no camera or wifi other then that its great
Click to expand...
Click to collapse
mm's cm is based on stock rom...you should try stock kernel when it's released...
silveraero said:
Well I don't have any issue with wifi and CPU governors from Achotjan's kernel are there. Just, battery drain fast, 50% in 6 hours without using.
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Many governors are missing (Brazilian wax,interactive,smoothass,savagedZen and some others)...I think that amin included only Th's governors!! I will test the kernel again today..just to see if I can confirm problems reported!!
Sent from my X10i using xda premium
New Release is on the way...
but I have to test some stuff...
i`m ready to test things if u want\
Hi
I've tested the SDE version and i it WLOD after overclocking to 1228...
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Gingerbread?
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Would any of your kernels work on 2.3 non-cm7/cm9 roms?
Feedback
Amin,
not work on [ROM]"X10S" |v9 Final released FTF File| 21/07/2012
blank screen after boot logo.
Amin` said:
P7001 Released! - All Cm7-SDE-Stock Download Links can be found in here:https://sites.google.com/site/aminkernels/devices/x10
Changelog:
[P7001] Optimized Kgsl Drivers
[P7001] Fixed Battery Drain
[P7001] Cleaned Up some useless Cods/Drivers
[P7001] Improved Performance
[P7001] Stock Freq at Boot
[P7001] VDD
For Stock Kernel Users:
I forgot to package the wifi modules in zip but Cm7,Sde users don't need it...so Stock kernel users have to wait till tomorrow when I make a flashble zip for them for wifi...
Click to expand...
Click to collapse
Links are not working again!
tori_mc said:
Links are not working again!
Click to expand...
Click to collapse
Confirmed
Sent from my X10i using xda premium
Preface:
This is a custom 3.0.8 kernel developed for Android Jellybean 4.x and build for multiple Sony 2011 devices
It is based on CAF kernel and is kept as clean as possible while maintaining working hardware
Other Android versions are also bootable, but are not widely tested
Features:
Pure CAF 3.0.8 kernel
Full hardware support
Defaults:
IO scheduler: ROW
Requirements:
Unlocked bootloader
Fastboot
Install:
Backup
Download the kernel file for your device from the list that follows and flash it:
adb reboot bootloader
fastboot flash boot <image file>
fastboot reboot
Now you should be seeing the coolest kernel boot animation
Downloads:
3.0.8
urushi
iyokan
Uninstall:
Flash back to stock using SUS or flash another kernel
Notes:
TODO
Sources:
The linux kernel is GPL'ed, everyone who does modifications should make them publicly available.
I accept patches any way possible. Basically I only read pms if they contain some suggestion or patch Credits go to the author obviously
https://github.com/nobodyAtall/msm7x30-3.0.x-nAa
Donate:
If you are enjoying my work please consider donating:
Donations are voluntary but allow me to spend more time on this device.
Disclaimer:
I can't be held responsible if this Kernel bricks your device or makes it explode in your hands! Use it at your own risk!
Changelog:
jb_chocolate:
TODO
ics_chocolate:
3.0.8-nAa-03 (6/5/03) @0f00b041b19c0b4a1eb
- Rebased on ics_chocolate branch
- Devices: smultron, coconut, haida, hallon, iyokan, mango, urushi, anzu, satsuma
- anzu: not undervolting display
- Increased pmem for hdpi devices
- leds: hardcode max_current
- leds: regrant users access to leds' real safe max current
- anzu: fix ALS
- cpufreq: ondemand and interactive governor fixes
- msm7x30: overclocking implementation - performance is greatly improved
3.0.8-nAa-02 (28/4/03) @566249c116bbb
- Devices: smultron, coconut, haida, hallon, iyokan, mango, urushi, anzu
3.0.8-nAa-01 (23/4/03)
- Test build for 3.0.8 for community feedback
- Devices: smultron, coconut, haida
Full feature changelog:
https://github.com/nobodyAtall/msm7x30-3.0.x-nAa/commits/ics_chocolate-nAa-master
Does this kernel is the same version from the one in xperia mini (28-04-2013) or is this already update to the newest version?
Sent from my Xperia Ray using xda app-developers app
Sorry for a noob question (haven't really followed the development), will this kernel work with stock ROM?
Version 3 wont boot with cm10.1
I saw a version from 6-5-2013. I can´t find it in the changelog. Could you explain the main changes between this new one and the old one?
Thanks in advance and great work! I´m glad to see a 3.x kernel to our 2011 xperia
functionality????
does it have 100% functionality??
or still at building stage??
masteriori said:
Sorry for a noob question (haven't really followed the development), will this kernel work with stock ROM?
Click to expand...
Click to collapse
It is Jelly Bean (Android 4.1.x and 4.2.x) kernel and Sony doesn't release JB based ROMs for Xperia phones of 2011, so it will not work with stock ROM (which is Ice Cream Sandwich - Android 4.0.3 and 4.0.4)
Good job guys :good:
The phone now goes into deep sleep off the charger without having to reboot.
WiFi works
BT works (have not checked in-call yet)
Screen jumps on the horizontal during kernel boot animation now.
Urushi
PACv19.3 (4.1.1)
Baseband 85
SIO
Smartassv2
Doesn't boot Liquid smooth ROM (based on CM10.1) - http://forum.xda-developers.com/showthread.php?t=2266867
I presume it doesnt boot CM10.1 ROMs. Anybody else can confirm?
thomas1991_12 said:
Version 3 wont boot with cm10.1
Click to expand...
Click to collapse
Yes it boots. Using cm 10.1 - build of Mike's ROM.
Sent from my Xperia Ray using xda premium
nuttkrakk said:
Yes it boots. Using cm 10.1 - build of Mike's ROM.
Sent from my Xperia Ray using xda premium
Click to expand...
Click to collapse
This kernel won't boot with CM10.1 ROMs. The one you are talking about it modified by Mike for his own ROM.
Using your kernel with SJB ROM.
I like it, the color is not over-saturated anymore and i can finally set the clock to greater than 1 Ghz. Testing more, and i will report here if there is a bug or problem
yonzz said:
Using your kernel with SJB ROM.
I like it, the color is not over-saturated anymore and i can finally set the clock to greater than 1 Ghz. Testing more, and i will report here if there is a bug or problem
Click to expand...
Click to collapse
would be great if you could say something about battery life when idle
rob rich said:
would be great if you could say something about battery life when idle
Click to expand...
Click to collapse
Battery was a bit high overnight at 1.6% per hour.
Sent from my Xperia Ray using xda app-developers app
rob rich said:
would be great if you could say something about battery life when idle
Click to expand...
Click to collapse
My phone is still in charger, so i can't test it for now.
yey! its nobodyAtall !!
hi all
what is recommend goverment and I/O for this kernel ?
have anyone feedback about battery drain?
thanks & great work DEV!
jareee said:
hi all
what is recommend goverment and I/O for this kernel ?
have anyone feedback about battery drain?
thanks & great work DEV!
Click to expand...
Click to collapse
I use SmartassV2 and sio I/O and I've got about 2 days and 4 hours on my Iyokan. Results may vary on yours but check it out. Do a few discharge cycles and calibrate the battery and after that you can get the most out of your battery and performance
did this kernel is for cm based rom's or for upcomming sony jb rom's?
Fude Kernel v1.4.1 (3.0.101)
Features:
Compatible with stock 4.1.2 or any rom based in stock jellybean.
Updated to 3.0.101
Native exFat support (Driver from Samsung OSRC).
Support for BLN (Backlight Notifications - Ready to use BLN Control).
Compiled with Linaro Toolchain 4.9 optimized for Cortex-A9!
Sysctl tweaks.
Multi-core scheduler support.
SWAP support.
zRAM support.
Disabled Samsung DFVS.
Init.d support (needs busybox)
Added IO schedulers:
ROW
SIO
SIOPLUS (I/O Scheduler by default)
VR
ZEN
Added governors:
Abyssplug (as default cpu governor)
HotPlugX
LulzactiveQ
Sakuractive
Smartassv2
Changelog:
Code:
[/SIZE]
1.4.1 [2014/08/27]:
* Fixed bluetooth.
* Added zRam support.
1.4 [2014/08/11]:
* Rebuilded from clean sources (yes, again, rebuilded from the new samsung kernel sources)
* Applied all patches from 3.0.31 to 3.0.101
* Now, I added only the best governors and io schedulers
* Updated exFat implementation
* Disabled Samsung DFVS
* Update toolchains
* Add init.d support
1.3:
* Rebuilded from clean sources.
* Removed LagFree and Hotplug governors.
* Added InteractiveX, OndemandX, Lionheart and Sakuractive governors.
* Multi-Core scheduler support.
* New exfat implementation.
* Sysctl tweaks.
* Fix 1ghz bug (I hope)
1.2:
* Added Lazy, LagFree and OndemandQ governors.
* Added ROW and ZEN I/O schedulers.
1.1:
* Fixed About -> Phone -> Kernel version
* Added MinMax and LulzactiveQ governors
* Ondemand + SIO are default governor and IO scheduler
* Added support for swap
1:
* Initial release
Downloads for 8190/8190L
1.4.1
In attached files
Previous versions:
1.4 http://www.mediafire.com/download/uatub78971gnyl5/Fude-Kernel-1.4_GT-8190.zip - MD5:
Code:
55d74c290a56ff79ddac988057d7024b
1.3 http://www.mediafire.com/download/nmani5fh8r73492
1.2 http://www.mediafire.com/download/5nx4kz33g1lhtw1
1.1 https://www.mediafire.com/?jr7oap73xudhsgq
1.0 https://www.mediafire.com/?82qv851hr5dovqi
Downloads for 8190N
1.4.1 in attached files
I haven't N version, so, I can't test the NFC features. Please, try and report...
1.3 http://www.mediafire.com/download/crgome04u1evfoh/Fude_Kernel_1.3_8190N.zip
Source Code
3.0.101 https://github.com/LuuchoRocha/fude_kernel_s3mini
3.0.31 https://github.com/LuuchoRocha/fude_golden_kernel
¿How to...
activate zRAM?
If you want to activate zRAM, a ZIP (beta) is available in attachments.
It will create a 64mb compressed block device. Needs busybox and init.d support
A log can be found in /data/zram.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
activate SWAP?
If you want to activate SWAP, a ZIP (beta) is available in attachments.
It will create a 128mb file for swap in /cache partition. Needs busybox and init.d support
A log can be found in /data/swap.log
Please, don't use this if you really don't need it or you don't know about the advantages and disadvantages.
NICE! i Will try and report then
I flashed it on stock xnna2 and when i go to about phone it give me kernel version not available beside there is no button light
Ahmed.ragab said:
I flashed it on stock xnna2 and when i go to about phone it give me kernel version not available beside there is no button light
Click to expand...
Click to collapse
Mmm stock xnna2? Can you give me a link to the rom? I want to try with it but I can't find it....
The "unavailable" on the kernel version is an issue about the name but nothing else...
I will fix that in the next version...
What do you want to say with button light? The capacitive buttons light doesn't turn on never?
http://live.samsung-updates.com/det...8190XXANA2.htmlQUOTE=LuuchoRocha;51468798]Mmm stock xnna2? Can you give me a link to the rom? I want to try with it but I can't find it....
The "unavailable" on the kernel version is an issue about the name but nothing else...
I will fix that in the next version...
What do you want to say with button light? The capacitive buttons light doesn't turn on never?[/QUOTE]
Yes never turned on
Here is the link
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
LuuchoRocha said:
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
Click to expand...
Click to collapse
Sorry but I'm using stock amj3 kernel now
what about overclock?
i really need more cpu speed for smooth games.
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
+1
Sent from my GT-I8190 using XDA Premium 4 mobile app
If you can overclock the stock ana2 kernel, you will be the best dev ever
Sent from my GT-I8190 using XDA Premium 4 mobile app
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
you have clearly not done any research on the subject of overclocking this phone
please take some time to read up on the subject of overclocking before you go requesting for it
as for making request
at no point should you forget that developers on here have their own lives
the work they do here is a hobby
they do not get paid to do this work
keep that in mind at all times
efaustino84 said:
you have clearly not done any research on the subject of overclocking this phone
please take some time to read up on the subject of overclocking before you go requesting for it
as for making request
at no point should you forget that developers on here have their own lives
the work they do here is a hobby
they do not get paid to do this work
keep that in mind at all times
Click to expand...
Click to collapse
Yeah, I know that it's unstable and a little dangerous to overclock this phone, but it shouldn't harm the device to go to 1.2ghz, right?
Sent from my GT-I8190 using XDA Premium 4 mobile app
koragg97 said:
Yeah, I know that it's unstable and a little dangerous to overclock this phone, but it shouldn't harm the device to go to 1.2ghz, right?
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
True :thumbup:
Only battery will drain faster thats all if kernel OC is good!!
Sent from my GT-I8190 using XDA Premium 4 mobile app
galaxy mini said:
True :thumbup:
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
my statement still stands unless you can provide proof against it
my apologies to the OP i know i have gone off topic
efaustino84 said:
my statement still stands unless you can provide proof against it
my apologies to the OP i know i have gone off topic
Click to expand...
Click to collapse
No buddy you get me wrong...
I totaly agree with you
Sent from my GT-I8190 using XDA Premium 4 mobile app
galaxy mini said:
No buddy you get me wrong...
I totaly agree with you
Sent from my GT-I8190 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok :good:
LuuchoRocha said:
Thanks for the link. I tried the kernel with ANB1 ANA2 and the only problem is kernel version unavailable... Please, you can try to check what says CPUSpy about kernel version?
Click to expand...
Click to collapse
here you go mate,and thanks for your work BTW:good:
HMIDA92 said:
what about overclock?
i really need more cpu speed for smooth games.
Click to expand...
Click to collapse
Overclock the Mini S III is a hard work and probably not feasible due to battery drain ... On the other hand, I have my device little while ago and do not want to damage it yet
I'm sorry but I can't provide overclock for our device...
Still, I'll take a look about it.
LuuchoRocha said:
Overclock the Mini S III is a hard work and probably not feasible due to battery drain ... On the other hand, I have my device little while ago and do not want to damage it yet
I'm sorry but I can't provide overclock for our device...
Still, I'll take a look about it.
Click to expand...
Click to collapse
No problem man, we're just asking :good:
Btw is this kernel a modded ANA2 one? Both of them are 3.0.3.1, but still better ask
Sent from my GT-I8190 using XDA Premium 4 mobile app
It's builded from the lastest samsung sources