Dear XDA community,
everyday i'm reading new questions from users, how they have to unlock their Lumia 800 and how they can flash custom roms onto it...
So i decided to make this how-to-thread.
I'll keep this post updated as an overview:
post 2: Bootloader unlock DLOAD Lumia 800 to Qualcomm
post 3: Backup and flash your L800 with Ubuntu, flash in Windows using dewe's Lumia Downloader 0.5
post 4: How-To use USB-Video-Out
So please, guys, read this thread, and if you don't understand, feel free to ask. :good:
Bootloader unlock DLOAD Lumia 800 to Qualcomm
If you want to flash a custom rom, you need to have a Lumia 800 with qualcomm bootloader.
But it's a difficult way to make your DLOAD Lumia 800 to Qualcomm:
You need two main things:
1. You need ATF flasher box
2. You need good soldering skills or the special atf cables from gpg industries
Here's a tutorial to SIM-Unlock a Lumia 800: How-To SIM-Unlock your Lumia 800 - gsmhosting.com
This is almost the same procedure for "bootloader-unlocking" your Lumia 800.
You just do not need to click SP-Unlock, you need to click "boot repair" (and select qualcomm, of course).
Here's the thread of the special cables: No more soldering for lumia 610,710,800,900 easiest osbl swap ever
These cables do not require you to solder your device. You only need to open up your phone and connect it to the cable and your ATF Box.
So, if you don't want, or can't buy such a box, check for a local phone repair shop in your town/city. If they have ATF, i'm sure they can do this for you for a small amount.
Hope this helps.
Flash your custom rom using dewe's Lumia Downloader 0.5
Dewe's Nokia Lumia Downloader 0.5
I attached the Nokia Lumia Downloader 0.5 for flashing your Lumia 800 easily in Windows.
Thx to dewe for his great work!
This requires your Lumia 800 to have the qualcomm bootloader!!
First: make a backup of ALL 9 partitions of the phone!
This might really save your ass Id did save mine more than once :good:
1. Install Ubuntu to your computer, or use Ubuntu-Live-CD
2. put phone into "Qualcomm Mode" by pressing VOL UP + POWER and connect it to your pc
3. check with
Code:
sudo fdisk -l
how your phone appears in ubuntu
4. backup your partitions using this:
Code:
sudo dd if=/dev/sd[B]X[/B]1 of=/media/Data/backup1.bin
sudo dd if=/dev/sd[B]X[/B]2 of=/media/Data/backup2.bin
sudo dd if=/dev/sd[B]X[/B]3 of=/media/Data/backup3.bin
up to
sudo dd if=/dev/sd[B]X[/B]9 of=/media/Data/backup9.bin
where the X is your special letter, mostly it's b, c, or d.
if = your input file
of = your output file
And this might take up to 2 hours.
Restoring your backups is the exact opposit.
second: you can now flash your Lumia 800.
because you're already in Ubuntu, you can flash it using:
Code:
sudo dd if=/path/to/your/os-new.nb of=/dev/sd[B]X[/B]9
You MUST flash the os-new.nb file to partition 9!!!
Or you can use attached Nokia Lumia Downloader on Windows.
1. Connect your phone in "qualcomm mode"
2. open the Tool with admin rights in Windows
3. Klick "download" and select os-new.nb file
NOTICE: when you connect the phone in "qualcomm mode" in windows, you'll get a message of formatting the drive. DO NOT DO THAT!!!! CLICK CANCEL! If you format, your phone's broken.
How-To use USB-Video-Out
How to use USB Video Out:
As it seems to be a little "difficult" to use the usb video out package, here's what you have to do (this is a copy out of the readme file of the package):
You can download the needed files here:
USB-Video-Out.rar
Mirror @4shared
Enabling USB video out on the phone (ON THE PHONE)
- From Start Menu swipe over to the application list and run "USB Video Out"
- Answer Yes to enable USB Video out. This is a toggle.
- When the phone boots up it is in Zune Mode which enables it to sync data with Zune Client software on the PC. You will need to toggle this to Video mode using the above steps to get video out.
- Note: Toggling between Zune mode and Video mode requires the phone to reboot each time.
Setting up driver on the desktop (one time)
- Make sure Zune is not running.
- Your Phone must be flashed with a ROM that has video out bits on it, they must be enabled, and the phone must be on and plugged into your PC to continue. When the phone boots up the default setting is OFF for the video output.
- Start -> Right click on Computer, select Manage
- In "Computer Management" click on the Device Manager
- Under "Other Devices"
- Within the list of drivers Right Click on WM7VIDSTREAM driver, select "Update Driver Software..."
- Choose Browse and point Windows to appropriate driver folder.
- Approve the Unsigned Driver installation.
Starting application
- Launch VidStream.exe.
- This application does support disconnect & reconnecting of the phone's USB cable.
- If a previous instance of VidStream.exe was running with the device connected, you will need to simply unplug and replug the phone's USB cable.
- Press ESC to exit the PC Client application.
Re-enabling MTPz USB sync (Zune Mode)
- Open "USB Video Out"
- Answer Yes to enable MTPz
- The device will reboot to make the changes effective.
Click to expand...
Click to collapse
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Paviano said:
Oh, I was about to write that I'm flashing my phone on Windows but then I saw this method below the Ubuntu.
Isn't it better to put the windows method above the ubuntu? I think more ppl use Windows and possibly won't se the windows method as me
Click to expand...
Click to collapse
Hi, thx for reply, i wrote it this way, because i wanted to point out, that it is really recommended to make a backup.
If i put the windows flashing above, most people will stop reading, and don't make a backup
I think this way, more people read the backup story, so it's their choice if they don't make one
Zune
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
if i got for it, it will cost me about 12000 Pakistani rupee for ATF, and about 4000 Pakistani rupee for cable............total 16000, and i can buys with this + sale price of my cell = samsung s#........my GOD....where i am
Good bye to lumia 800....wanna get rid off
bowi1612 said:
Hey thanks for this tutorial. I just had one quick question.
After I do this can I still sync with Zune? Because I would like my data such as songs and apps back. Is this still possible?
Click to expand...
Click to collapse
Hi there,
sorry for late reply.
I you mean with "doing this" unlocking your bootloader, syncing data does not really have anything to do with your bootloader.
Generally, if you make your DLOAD to Qualcomm, your personal files are still on your phone, as bootloader changing does not overwrite any personal files (partition 9 of the phone).
It matters more, which rom you install, if syncing content with zune is still possible or not.
If you flash a custom rom, your data is whiped, as you overwrite your OS partition with the custom rom. But after that, with my roms for example, you can sync your songs etc. back to your Lumia.
I don't think this might work with apps, you have to install them again via marketplace.
Is it possible to use your ROMs on N9?
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
hrbani said:
Is it possible to use your ROMs on Nokia N9? If yes how?
with regards
Click to expand...
Click to collapse
Is this a serious question??
mate... N9 is a totally different phone, this will NOT work!
Thanks. I'm amateur and know noting about ROM port and others, I asked that question because I want win phone on my N9 .
with regards
Bootloader unlock DLOAD to Qualcomm L800
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
saddam.khan999 said:
If I do Bootloader unlock DLOAD to Qualcomm L800 using ATF NITRO ...
do this make any changes on my ROM..?
will this make my phone data wiped...?
and do i need any kind of flash files for this
Click to expand...
Click to collapse
Hi there,
no, this only overwrites your bootloader, which is on a different partition as the phone operating system.
so this will not wipe your phone data.
just flashing a custom rom will wipe your data.
Remove Funkyrom
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
bowi1612 said:
I am just wondering. If I ever want to go back to the Original Windows Phone OS, can I just restore to factory settings on my windows phone? Or do I need to do some other stuff, I can't find an answer anywhere.
Click to expand...
Click to collapse
Hi there,
if you've made a backup, you can restore this and reset your phone afterwards.
That's the best solution in my opinion, because you're back on the original rom, but you're still on the qualcomm bootloader, so you can reflash a custom rom whenever you want
Of course you can restore DLOAD and flash the original ROM with ATF, too. But then you have to do the soldering stuff again, if you want to use a custom rom in the future.
thanks for your support
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Celteek said:
What about the method from cyclone box?
Do you think there will be a method soon for changing bootloader without opening the phone and buying a box? The problem is I don't want to pay for cyclone box.
Click to expand...
Click to collapse
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
lordmaxey said:
No. I think there'll never be an option.
Afaik, this is only possible with ATF, not with cyclone.
Click to expand...
Click to collapse
It is said on their website that it is possible to patch bootloader without opening the phone. (sorry I can't post links yet, but it is easy to find on google by typing "cyclone box lumia 800 no tp" ). Unfortunately we need a cyclone box . My question is : will there be a method with which we don't need a cyclone box?
Related
After I seen two threads regarding QPST/CDMA Workshop, I decided to give it a try too.
However, I had the problem with drivers, which I luckily solved.
Drivers source: http://catalog.update.microsoft.com...updateid=14df499c-c71f-4152-a63b-1c1e40cfc14c
So, here's the solution for everyone:
1. Unzip the attached archive.
2. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/modem/enable
3. Open Device Manager. Under unknown devices you'll find two "SEMC HSUSB" devices.
4. For both, install drivers from the folder.
You'll get unsigned driver warning, ignore and continue with installation.
5. Reboot phone.
6. adb shell, su, echo 1 > /sys/devices/virtual/usb_composite/diag/enable
7. QPST/CDMA workshop should detect the phone now.
I won't link QPST (I don't know if there are any copyright barriers), but you can find it extremely easy on Google. You want QPST 2.7 build 355.
If you're asked for SPC code, it's default 000000.
Now, I need testers: anyone with locked bootloader, or bootloader unlocked with Omnius/SEtool, please open EFS Explorer and tell me if there's anything inside cert, client-cert and client-key folders. Alternatively, try to find any SE/SEMC certificates in EFS.
Best regards
64 bit vista won't let me install. any chances you can make this.
trent6gol said:
64 bit vista won't let me install. any chances you can make this.
Click to expand...
Click to collapse
Strange. What error are you getting?
Thanks no error messages at all!
Good. Is your bootloader locked?
No new hardware are detected, even with modem enable set to 1
Im in Xperia arc unlocked by setool
Alejandrissimo said:
No new hardware are detected, even with modem enable set to 1
Im in Xperia arc unlocked by setool
Click to expand...
Click to collapse
Just turn on modem mode and install provided drivers for both HSUSB devices in Device Manager.
Blagus said:
Just turn on modem mode and install provided drivers for both HSUSB devices in Device Manager.
Click to expand...
Click to collapse
When I set the modem to 1 the adb stop working and the sa102 dissapear from the device manager but there is now new hardware detected.
Yes, that's what should happen - you should have two or three HSUSB devices under unknown ones. Install drivers for them.
Blagus said:
Yes, that's what should happen - you should have two or three HSUSB devices under unknown ones. Install drivers for them.
Click to expand...
Click to collapse
Nop. There is no unknown devices at all :S
Im runing a custom kernel, maybe need to run stock?
link up my video also and claim its yours atleast give credit
also guys if your on stock rom verizon to enter DIAG mode you enter ##3424
edokassiah said:
link up my video also and claim its yours atleast give credit
also guys if your on stock rom verizon to enter DIAG mode you enter ##3424
Click to expand...
Click to collapse
Which video?
Fyi for those using cdma workshop, You dont need to do the adb commands, phone wont "read" the info for general stuff, just goto security, send the spc code, it will unlock, then continue to upload your PRL stuff and change nam settings. Worked fine. =)
what is this exactly? and what is DIAG/QPST/CDMA workshop?
For cdma phones to change out which carrier its on, you need diag mode (which is the programming mode thats seperate from rom flashing as it tells the phone which tower to connect to) qpst and cdma workshop, are tools we use to program this stuff easier. Cdma workshop costs 100$ for a license tho.
x64 Drivers that WORK!!!!!!!!!!!
i dunno if this even matters anymore but i just made these x64 drivers and they have been tested and work just fine htey are not signed but they will install on win 7 x64
Will this driver let us who use custom rom to using DIAG mode?
since most of custom ROM kill the DIAG ability, so nothing will happen when u press #3424
no they wont unforutnatly
Hi guys I have been following XDA Developers for years and I love it I have found many useful tips and tricks in my time from hear over at the Android forums and now I would like to share my first post with you all not only as a thank you but also even though the nokia WP 7.8 upgrade is close I was impatient like many of you and wanted it now I read lots of threads about using navifirm+ etc and renaming files but in all honesty I think my method is easier and quicker and cuts out a lot of confusion hope somebody finds this as useful as I did.
All you will need for this Update is Nokia Care Suite.
PLEASE NOTE THIS METHOD IS FOR UPDATING YOUR ORIGINAL PHONE AND CARRIER
For Example..
Before Update your phoneis running on Vodafone WP7.5, - After Update it will be Vodafone WP7.8 (carrier locked)
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Right lets get started
We need to find a decent version of Nokia Care SuiteThis I found a little hard as a lot of the downloads are full of bloatware/spyware however this is the one I used. softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml ( as a new user I cannot post the Link)
You may need to update some windows components mainly Microsoft net framework 4.0 and all that is available including the extender. you may even need to update c++ redistrubutle to be able to install Nokia care suite. however Nokia Care Suite will tell you what you need.
Download and install Nokia care Suite this will take a little while and after it is installed you then install all Drivers in C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers some will not be compatible that is normal.(my system is win7 64bit)
After all drivers have been installed you can then Open Nokia care center . you may have to go to your program files and open the Nokia Folder C:\Program Files (x86)\Nokia\Nokia Care Suite\Application Launcher\bin application launcher then right click and run as administrator.( I had Too)
once it has loaded you will have a menu double click “Product Support Tool For Store 5.0” you will see a picture of a disconnected phone and cable Click File and “open Product”
Find or type into the filter RM-801 . YOU SHOULD THEN HAVE 1 RESULT this is Our Nokia Lumia 800's click open and you will now see it on the screen (left) with the disconnected cable and phone. connect your phone so that the phone drivers get installed (after install you can leave it connected)
check that in the bottom corner their is a Globe lit up saying online it should be. then click Programming at the bottom left of the window and select Recovery. a new field will appear on screen saying Properties and you will see three boxes. Code, Variant Name and Version.
Click into the Code box and type your 7 digit code from the sim card tray you wrote down and click find online.a Box will open and lots of firmwares should appear within the popped up box in the Code section again type your code and that will give you your specific update to WP7.8
Click download and wait until it has finished after it has downloaded then click update list it should appear in the properties boxes. (if not just select tools from drop down menu and click Downloads and then double click the file)
Then Just highlight the Firmware file and click Start The software will then take over and instruct you to turn off the phone( if it is still connected) after you have done this then connect the phone to the USB cable whilst holding volume up button the phone will vibrate a couple of times and the drivers may instal again give it a few seconds and . press retry Thats it Nokia Care Suite is doing your Upgrade.
Sit Back and relax as Your Lumia 800 upgrades to WP 7.8 I am pretty sure this method will work with any Lumia device however I have only done it with MY Lumia 800 and therefore cannot guarantee it.
obviously I cannot be held responsible for any bricking or damage you cause to the your phone so only proceed if you are comfortable doing so.
Hope you all find this useful cheers oobritoo.
pls delete
mj084 said:
pls delete
Click to expand...
Click to collapse
Could I ask why you want me to delete this thread?
Why delete, post very useful
oobritoo said:
Hi guys I have been following XDA Developers for years and I love it I have found many useful tips and tricks in my time from hear over at the Android forums and now I would like to share my first post with you all not only as a thank you but also even though the nokia WP 7.8 upgrade is close I was impatient like many of you and wanted it now I read lots of threads about using navifirm+ etc and renaming files but in all honesty I think my method is easier and quicker and cuts out a lot of confusion hope somebody finds this as useful as I did.
All you will need for this Update is Nokia Care Suite.
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Right lets get started
We need to find a decent version of Nokia Care SuiteThis I found a little hard as a lot of the downloads are full of bloatware/spyware however this is the one I used. softpedia.com/get/Mobile-Phone-Tools/Nokia/Nokia-Care-Suite.shtml ( as a new user I cannot post the Link)
You may need to update some windows components mainly Microsoft net framework 4.0 and all that is available including the extender. you may even need to update c++ redistrubutle to be able to install Nokia care suite. however Nokia Care Suite will tell you what you need.
Download and install Nokia care Suite this will take a little while and after it is installed you then install all Drivers in C:\Program Files (x86)\Nokia\Nokia Care Suite\Drivers some will not be compatible that is normal.(my system is win7 64bit)
After all drivers have been installed you can then Open Nokia care center . you may have to go to your program files and open the Nokia Folder C:\Program Files (x86)\Nokia\Nokia Care Suite\Application Launcher\bin application launcher then right click and run as administrator.( I had Too)
once it has loaded you will have a menu double click “Product Support Tool For Store 5.0” you will see a picture of a disconnected phone and cable Click File and “open Product”
Find or type into the filter RM-801 . YOU SHOULD THEN HAVE 1 RESULT this is Our Nokia Lumia 800's click open and you will now see it on the screen (left) with the disconnected cable and phone. connect your phone so that the phone drivers get installed (after install you can leave it connected)
check that in the bottom corner their is a Globe lit up saying online it should be. then click Programming at the bottom left of the window and select Recovery. a new field will appear on screen saying Properties and you will see three boxes. Code, Variant Name and Version.
Click into the Code box and type your 7 digit code from the sim card tray you wrote down and click find online.a Box will open and lots of firmwares should appear within the popped up box in the Code section again type your code and that will give you your specific update to WP7.8
Click download and wait until it has finished after it has downloaded then click update list it should appear in the properties boxes. (if not just select tools from drop down menu and click Downloads and then double click the file)
Then Just highlight the Firmware file and click Start The software will then take over and instruct you to turn off the phone( if it is still connected) after you have done this then connect the phone to the USB cable whilst holding volume up button the phone will vibrate a couple of times and the drivers may instal again give it a few seconds and . press retry Thats it Nokia Care Suite is doing your Upgrade.
Sit Back and relax as Your Lumia 800 upgrades to WP 7.8 I am pretty sure this method will work with any Lumia device however I have only done it with MY Lumia 800 and therefore cannot guarantee it.
obviously I cannot be held responsible for any bricking or damage you cause to the your phone so only proceed if you are comfortable doing so.
Hope you all find this useful cheers oobritoo.
Click to expand...
Click to collapse
Your solution is good but has a big issue, and I will try to explain it to you.
Imagine that you are like me, having a Lumia 800 that you bought to Orange (or any other provider). Mine was an Orange France Lumia 800 that I had desimlocked officialy by them, and after this, I installed, via Navifirm, an unbranded ROM for the phone. When using your solution, as you said in your post, you must provide inside the Nokia Product Support Tool the code of your device, closely linked to your simcard (you said by yourslef that this code is located on the Simcard compartment. The Nokia Product Support Tool will then download and install on your mobile a ROM branded to the operator corresponding to the code provided.
Navifirm allows you to pick almost any rom, independantely to your code number, and by using a little trick (renaiming 3 files), to install it.
This is the biggest default of this method for someone who cares about not being branded again. If you are using a branded phone and want a firmware customized by your operator, then your solution is for sure the best one.
But anyway thank you for your post, it will help many of us I am sure.
Hi
My brother uses 0 which has Windows 7 installed in it as operating system. From the system itself, it has a built-in Bing search, not just for texts/phrases, images, videos, but for songs as well. Whenever a song is playing, the search option automatically picks up which song is being played & shows option to buy it from Windows Store.
I myself have Samsung Galaxy S 4G (1st generation) with Android as built-in operating system. Though I love Android for its variety, I just can't figure out how to do such song search with Android phones. Google is pre-installed in these phones. But Google's voice search doesn't help with identifying the song. Is there another way to do this?
Thanks!
ybregeon said:
Your solution is good but has a big issue, and I will try to explain it to you.
Imagine that you are like me, having a Lumia 800 that you bought to Orange (or any other provider). Mine was an Orange France Lumia 800 that I had desimlocked officialy by them, and after this, I installed, via Navifirm, an unbranded ROM for the phone. When using your solution, as you said in your post, you must provide inside the Nokia Product Support Tool the code of your device, closely linked to your simcard (you said by yourslef that this code is located on the Simcard compartment. The Nokia Product Support Tool will then download and install on your mobile a ROM branded to the operator corresponding to the code provided.
Navifirm allows you to pick almost any rom, independantely to your code number, and by using a little trick (renaiming 3 files), to install it.
This is the biggest default of this method for someone who cares about not being branded again. If you are using a branded phone and want a firmware customized by your operator, then your solution is for sure the best one.
But anyway thank you for your post, it will help many of us I am sure.
Click to expand...
Click to collapse
Thank You for your explanation I think maybe I should headline the fact this is only for original carrier firmware Updates
EvaBrian said:
Hi
My brother uses 0 which has Windows 7 installed in it as operating system. From the system itself, it has a built-in Bing search, not just for texts/phrases, images, videos, but for songs as well. Whenever a song is playing, the search option automatically picks up which song is being played & shows option to buy it from Windows Store.
I myself have Samsung Galaxy S 4G (1st generation) with Android as built-in operating system. Though I love Android for its variety, I just can't figure out how to do such song search with Android phones. Google is pre-installed in these phones. But Google's voice search doesn't help with identifying the song. Is there another way to do this?
Thanks!
Click to expand...
Click to collapse
Simply install from Google Play Store the application Shazam or Soundhound, and you're done!
---------- Post added at 03:14 PM ---------- Previous post was at 03:13 PM ----------
oobritoo said:
Thank You for your explanation I think maybe I should headline the fact this is only for original carrier firmware Updates
Click to expand...
Click to collapse
My pleasure. I thank you for posting this anyway, it's usefull
Thanks
Hello, i was wondering if this is also valid for Mexican Phones, i bought my lumia 800 phone in mexico and dont know if i can do this update, im really looking forward to the update =(.
-------------
edit
i was able to update, thx =D
Excellent
rafa8595 said:
Hello, i was wondering if this is also valid for Mexican Phones, i bought my lumia 800 phone in mexico and dont know if i can do this update, im really looking forward to the update =(.
-------------
edit
i was able to update, thx =D
Click to expand...
Click to collapse
Glad it helped welcome to 7.8
This worked great up until it showed me a really old WP7.5 rom as being the latest for my phone
Looks like I have RM-819_NAM_US_CV_VAR191243_MAGENTA_V1 whatever that means.
On my nokia lumia 610 instaled windows 7.8 with Nokia Care Suite.
Probleme is: app Bluetooth Share and Ringtone Maker is not preinstaled in new firmware. On markeplace not find. I find winth qr code on net, open link to app but message: this app is not disponible for my region...etc.. I change region on my windows live id from Romania to English (UK) but same mesage.
Please give me a way to have bluetooth share. Exist win 7.8 with this app preinstal?
yanqemil said:
On my nokia lumia 610 instaled windows 7.8 with Nokia Care Suite.
Probleme is: app Bluetooth Share and Ringtone Maker is not preinstaled in new firmware. On markeplace not find. I find winth qr code on net, open link to app but message: this app is not disponible for my region...etc.. I change region on my windows live id from Romania to English (UK) but same mesage.
Please give me a way to have bluetooth share. Exist win 7.8 with this app preinstal?
Click to expand...
Click to collapse
hi I only supplied the method to update the firmware I checked my Lumia*00 I do not have theses apps either and In my Marketplace they are listed as not being compatible with my phone Please remember although this is WP 7.8 it may not be the final release!!
Does this keep your phone data or will it all be done?
alexball said:
Does this keep your phone data or will it all be done?
Click to expand...
Click to collapse
hi the whole phone will be wiped so you will need to back-up important files.
Solution to have Bluetooth Share (preinstaled) in phone lumia 610 is to install firmware country variant Germany...and set region to Germany in phone. Tested.
How come my care suite does not find my lumia 800? but when i tryed whit my N9 it worked like charm?
Drivers problem
Ssave said:
How come my care suite does not find my lumia 800? but when i tryed whit my N9 it worked like charm?
Click to expand...
Click to collapse
Easy, you need to install the Nokia USB Drivers, located in the folder Drivers, found inside the installation forlder of Nokia Care Suite. Then your Lumia 800 will be recognized.
oobritoo said:
Before you start get your phone code pop your sim tray out and check the code by the Barcode/QR label it should be seven digits mine is 059N8H6
Write yours down and then put the sim and tray back in the phone.
Click to expand...
Click to collapse
Does anyone know or have access to how these codes work?
I bought my 800 unlocked from a 3UK store and don't want it locking to that network as I use a different carrier. I would have thought there were generic codes for non-carrier versions....
Thanks,
I have an issue, my phone is unbranded sim free Lumia 710 with code 059n2l6 there is no software found for this product code, Can I use any?
slugger09 said:
I have an issue, my phone is unbranded sim free Lumia 710 with code 059n2l6 there is no software found for this product code, Can I use any?
Click to expand...
Click to collapse
yes
For those who already have a QUALCOMM BOOTLOADER
1. Enter OSBL MODE.
WARNING: IF YOU GET FORMAT DISK MESSAGE IN WINDOWS - ALWAYS CLICK CANCEL.
2.Switch off the phone.
3. Press Volume UP and Power Key and wait for the short buzz abd release both butons. (To boot into NAND disk mode).
WARNING: IF YOU GET FORMAT DISK MESSAGE IN WINDOWS - ALWAYS CLICK CANCEL.
3. Run the oneClick DOWNLOADER (comes with the latest firmwares)
4. Choose the ROM. FLASH.
5. Once complete take the battery out; Re-Assemble, Switch on
OTHERS follow the following POST
NOTE: I do not take credit for any of the work by respective developers. I'm a lame user and that's my best quality. I would prefer things to be simple enough, if not I find one.
So for those who have been looking around for a Nokia Lumia 710 FULL UNLOCK and are jumbled with programs X, Y and Z and files A, B, C; everything seems right when your are following some steps and then, at some point of time, unfortunately for some it stuck and sucks. I've tried many things and the following is the one I like the most and find the easiest. Best of all, you don't have to worry about the DLOAD.
NOTE: One small mistake and you might brick the phone, so be careful.. I or the developers nor the forum is anyway responsible for your loss. But if you be careful, you won't have to worry.
READ the entire post and understand BEFORE you TRY
Step 1:
Download the required softwares.
( All required files are hyper-linked below )
i)> NSS PRO 0.48 or NSS PRO 0.51
ii)> QUALCOMM BOOTLOADER for Lumia 710
iii)> Depending on your system configuration, Windows USB Drivers either x86 or x64
iv)> Any one of your desired Custom ROM :
A. Rataplan Final, based on Nokia firmware 1600.3037.8862.13170 ,
B. Lumiatrix^8 V 5.1 based on 7.10.8835.35
C. Reality ROM based on 7.10.8858.136
D. fabiode34's Custom ROM
NOTE: You need only one ROM. so pick any. I've been using RATAPLAN's ROM.
Do Not Forget to thanks the Developer, whose ROM you are using.
Step 2:
Once you have all the files with you do prepare the program files for the FLASH.
a. Install the USB driver as per your system.
b. Extract the bootloader to a folder. You will get the following two files
RM803_12w07_prod_generic_nokia_osbl.esco
RM803_11w48_prod_raw_nokia_osbl.binc. Extract the NSS to a folder
Now copy the two bootloader files to the following folder within NSS folder
loaders\special\wp7Extract the Custom ROM to a folder. You should get a .nb file. If not, try another ROM
IF you did the steps as stated, you are all ready.
Now before proceeding, make sure you have Enough battery back up on your phone and for the PC/Laptop (in case there is a powercut and you don't have enough backup, you won't have to but another paperweight.).
Step 3:
Flash your phone:
Did I Miss Something. No. You don't have to check for DLOAD. Not for Lumia 710. I already made it clear.
a. Connect your phone to PC. You don't have to do any button pressing or have to go to recovery mode.
b. Launch the NssPro.exe from the NSS folder in admin mode. Grant all the permissions the application asks for, if any.
When the allpication window is launched, make sure you know what is where. Use the snap for reference
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Make sure, you select the USB port from port selection and alllow the application to detect the phone.
Once the application detects the phone it will show "Nokia USB connectivity.
Change the application mode to FLASHING
On the right side select WP7 Tools. You will get the Bootloader tools..
c. Now refer the following screenshot and proceed.
i. In Advance Connectivity section select NORMAL Mode and then WP7 Qualcomm, if it does not detect automatically.
ii. In Bootloader tool select the OS file and locate your CUSTOM ROM to it.
Once you proceed further there is no going back. So be careful. Make sure that you have all the files in place as stated earlier and also you have installed all the drivers. Use CUSTOM ROMs for Lumia 710 only (Either your own or reliable developers). When Windows asks for format, ignore it. Do not respond to any pop up from any application other than the NSS. You should not leave the PC unattended for whatsoever reason. NEVER choose YES for FORMAT, simply close it.
iii. Hit the install. When asks for confirmation, select yes.
Wait for a while. Do Not Panic. Phone will go blank and will start in NAND DISK mode in a while. The connectivity mode will switch to NAND DISK DRIVE mode.. If Format option pop-ups, Select NO.
iv. Check the advance connectivity mode, and set as stated earlier to NORMAL and WP7 Qualcomm.
v. Hit the Write OS in the Bootloader tools. Wait for a while (usually 5 to 10 mins) Be patient. NSS will ask to restart the phone.
You cannot restart the phone. Take the battery out. Then again put it back and boot the phone.Close the NSS tool and any other pop-ups.
Your phone is now unlocked and loaded with a custom ROM
Step 4.
REACTIVATION of phone.
Your phone is ready to be used if you have used a correct ROM.
Sometimes, if you install a locked ROM or on on a Locked phone, your phone will be locked for LIVE ID usage. you'll have to ACTIVATE the phone to use LIVE login. You can still use other features though. Do not worry, as activation is as simple as chatting with a buddy. Just CLICK HERE and use chat and ask the customer care executive for activation code. They will need few of the details of the phone, and they will give the code. use this code to unlock LIVE usage.
Once again, I take no credit for the work. I'm just sharing the info in a clean manner. I use the method and works for me. Your Phone Your responsibility.
All links were alive when posting. If any link is dead, PM me. Response will not be prompt, but I'll make sure I respond to your requests.
Error flashing
Hi, good guide thanks!
When I press write OS in the final stage i get this mesage:
Checking file selection...Done.
Looking for NAND disk...Not found.
Are you sure you have development Qcom loader ?
Click to expand...
Click to collapse
What should i do?
Lumia 710 RM-803 flashing Lumiatrix
Whenever i plug in my phone it comes up as a qualcomm device, and the first part of your instructions went perfectly
Check prerequisite files.
Hi,
If the first part went right, you should have no problem for the second part. First part is the critical part here.
(Even I Had faced the same problem many times. Downloading and replacing the files should do it.)
Here are the possibilities:
If the first part went right; the phone will go to service mode; the USB should disconnect and reconnect automatically. You'll get the FORMAT disk message and you should select NO or simply close it.
If you accidentally click on YES, your phone is a gonner
If everything is correct, NOKIA USB CONNECTIVITY should change to NAND DISK. And you can p[roceed with second part.
NOTE1. If first part is not pass, the second part cannot be initiated.
2. If first part is pass, the second part MUST be completed.
What if I just want to unlock the phone and not to install the custom rom...thus it will work i mean it'll unlock my phone using the qualcomm loader files only.
Hmmmm... Just the UNLOCK....
mobileplazza said:
What if I just want to unlock the phone and not to install the custom rom...thus it will work i mean it'll unlock my phone using the qualcomm loader files only.
Click to expand...
Click to collapse
Well, That is completely upto you. But consider the following scenarios, b'cause I have no idea what your UNLOCK mode means.
Case 1: If phone software is not hacked, you cannot install YOUR own softwares without having to purchase from the MarketPlace. You'll have to install applications only through MarketPlace.
Case 2: If you think, installing the Qualcomm bootloader will unlock your phone, then you are mistaking; it will only enable your phone to install any firmware on it (simply saying it will be a dumb rock until you install a firmware).
Case 3: If your phone is carrier locked, and you want to use it on any other network: Simply insert the new SIM card and follow the LAST LINK IN THE ORIGINAL POST. But use it only after a fresh ROM installation or Phone Hard Reset.
psquicker said:
Well, That is completely upto you. But consider the following scenarios, b'cause I have no idea what your UNLOCK mode means.
Case 1: If phone software is not hacked, you cannot install YOUR own softwares without having to purchase from the MarketPlace. You'll have to install applications only through MarketPlace.
Case 2: If you think, installing the Qualcomm bootloader will unlock your phone, then you are mistaking; it will only enable your phone to install any firmware on it (simply saying it will be a dumb rock until you install a firmware).
Case 3: If your phone is carrier locked, and you want to use it on any other network: Simply insert the new SIM card and follow the LAST LINK IN THE ORIGINAL POST. But use it only after a fresh ROM installation or Phone Hard Reset.
Click to expand...
Click to collapse
thnx for ur reply i understand it..and mine is case 3 i just want to unlock the carrier locked phone i have two phones with me but i dont have clear tutorial to unlock it if you know please guide me thnx in adv.
thanks for the tutorial
Howver for some reason NSS Pro doesnt detect my phone, (RUN as Administrator)
Phone Detect
Jigneshg said:
thanks for the tutorial
Howver for some reason NSS Pro doesnt detect my phone, (RUN as Administrator)
Click to expand...
Click to collapse
Hi,
Have you downloaded and installed all the files as needed. (All the required files are hyperlinked within the description).
It works for me on Win7, both 32 and 64 bit.
Make sure you have installed the proper USB driver for your system (from Step 1 / sub step iii). This is mainly the reason for phone detection.
Check if it helps.
psquicker said:
Hi,
Have you downloaded and installed all the files as needed. (All the required files are hyperlinked within the description).
It works for me on Win7, both 32 and 64 bit.
Make sure you have installed the proper USB driver for your system (from Step 1 / sub step iii). This is mainly the reason for phone detection.
Check if it helps.
Click to expand...
Click to collapse
Ya managed to realise afterwards, I have flashed Rataplan's 6.0 ROM
Carrier Unlock
mobileplazza said:
thnx for ur reply i understand it..and mine is case 3 i just want to unlock the carrier locked phone i have two phones with me but i dont have clear tutorial to unlock it if you know please guide me thnx in adv.
Click to expand...
Click to collapse
Installing the custom rom should debrand the phone.... Nothing more to be done.
Else use NSS PRO 0.51 in original post. There is a section to unlock the SIM.
Everything went well until...
hi bro
thanks for the post
very good
everything went well until i came to reboot my phone
it does not start up now
what shall i do?
i done all the steps and they matched yours perectly. all the messages were the same.
the nss said to reboot the phone
i unplugged the usb and took battery out and rebooted it.
nothing, it doesnt start up
help
Thanks... If i install custom rom... will i be able to install xap file manually?? let me know plz.....
Phenominal post!
I've successfully unlocked my Lumia 710 and flashed Rataplan V6.0 to my phone! Everything's working great, except I need to figure out my APN settings to get MMS working again. :L
The only suggestion I'd make for your Layman's guide is to make sure to let everyone know that they will lose anything that isn't backed up! Pictures, SMS, some contacts that aren't on your SIM etc. It may be common knowledge to some, but I didn't know. It's no big deal for me though.
Anyways, thanks a bunch! Great post!
Successfully installed custom rom
I have installed custom roms perfectly by using this method.Goto the post of IonutZuker on 14th May 2013, 06:40 PM
http://forum.xda-developers.com/showthread.php?t=2267334&page=2
Earlier, i was facing problem after completing 1st step.NSS Pro was not recognizing my phone completly.NSS Pro was showing the problem of NAND disk not found.
Press Volume + and power button
shams1924 said:
hi bro
thanks for the post
very good
everything went well until i came to reboot my phone
it does not start up now
what shall i do?
i done all the steps and they matched yours perectly. all the messages were the same.
the nss said to reboot the phone
i unplugged the usb and took battery out and rebooted it.
nothing, it doesnt start up
help
Click to expand...
Click to collapse
Press Volume + and power button at same time then try to repeat the process.
---------- Post added at 09:54 PM ---------- Previous post was at 09:42 PM ----------
saddambuet said:
Thanks... If i install custom rom... will i be able to install xap file manually?? let me know plz.....
Click to expand...
Click to collapse
Yeah, use WPAppPatcher.
And who is pressed FORMAT DISK when connected device what should i do? The phone isn't turn on ever since
Sorry but i try the other descreption to install custom rom, but i mistake in this
I am about to flash my girl 710, is there any info of the phone I sould check before flash?, or this will work anyhow?. Thanks for any advice you can give me!
PD: DONE, half your guide and half other that I found here in xda. Thanks Both.
Installing Custom ROMs help!!!!
So i downloaded rainbow mod 2.1 and the downloader.exe. I also have fully unlocked my Lumia 710 with Nokia Care suite 5.0. The porblem is, when i launch downloader.exe and click download ROM, it says "Lumia Disks not founded!" and tells me to put my phone in osbl bode, which i did. HELP ME PLZ!!!
Hi at all,
I have a Lumia 710 with DLOAD bootloader version 7.33.0 and OS version 7.10.8862.144.
Can I install a Custom ROM (Rataplan V7.0) with this method?
Guys, I have a nokia Lumia 510 with a DLOAD bootloader. Any Ideas how I can get a custom Firmware on to it? And will the process of changing the bootloader as specified above work for my phone? Please work on a custom ROM for it!! :crying:
*** Simplified Guide for: Unlocking Bootloader + Rooting/BusyBox/Custom Recovery + Radio/LG Inverted Logo/Inverted Screen/Wonky Touch Screen
Patch + CyanogenMod 11 Firmware ***
*ONLY FOR*: Metro PCS LG Optimus L9 P769 ( MS769 )
Guide updated: Saturday, October 18th, 2014
THIS GUIDE IS SPLIT INTO TWO POSTS, THE FIRST HALF OF THE GUIDE IS THIS POST, POST #1, THE SECOND HALF OF THE GUIDE IS POST #2
=== INTRODUCTION
First off let me just say that I did not find these vulnerabilities or write these exploits. The tutorial that I have written here for this device is a very simplified, decomplicated version of several complicated guides for the LG P769 Device all combined into one, easy to read, simple guide. This guide explains the mechanics behind every step so you will know exactly what is going on and why we're able to do this.
I wrote this guide in a deliberately redundant manner so that the reader will be able to easily accomplish unlocking the bootloader for this device. Although this guide may seem to be very long it is in fact written that way so that you can follow every step very easily.
You should understand first that within the LG Optimus L9 series of phones there are multiple submodels, those being the P760, P765, P769 and the MS769. The MS769 is the Metro PCS version that was manufactured by LG to be sold by and used on the Metro PCS Network, however, the MS769 is the EXACT SAME THING as the P769 which was manufactured by LG to be sold by and used on the T-Mobile Network. So it stands to reason that if you have a T-Mobile P769 this guide will also help you unlock your bootloader as long as it was manufactured before T-Mobile requested LG to encrypt the bootloader. Based on all of my research any MS769 or P769 manufactured on or before August, 2013 does NOT have an encrypted bootloader and CAN be unlocked. You may become very frustrated while doing this, but DO NOT GIVE UP because this guide will get the job done.
This guide will get your Bootloader unlocked, SIM Card Slot unlocked and get CyanogenMod 11 KitKat 4.4.4 installed. The greatest thing about having an unlocked bootloader is the fact that you will always have the option to get the LATEST Android OS including the new Lollipop 5.0 when it comes out because new releases will always be portable to this device! Read more about all of this below.
There are also links to now inexpensive but high end and premium protection cases and extended batteries so you can get your device pimped and protected.
=== THE PITCH
Now some Q&A and the reasoning behind this:
Why unlock the bootloader?
Why install CyanogenMod ROM/Firmware?
Why have prepaid wireless service with a crappy company like Metro PCS/T-Mobile?
Why this phone?
--- WHY THIS PHONE?
Why this phone?: This phone is CHEAP. I paid $75 bucks for this phone brand new off eBay with free shipping! then I ordered a hard Poly Carbon triple protection case with an additional layer of Corning Gorilla Glass version 2 + A Privacy Screen Protector for $10 bucks.
The hardware specifications for this phone are ****ing awesome for the price. The hardware is almost all open source. The processor is a Texas Instruments OMAP dual core with no backdoors in it and it can be overclocked to greater than 1.3GHz. Heck, Texas Instruments even published the CAD files and source code for this processor!
You can even order an extended battery for $15 bucks off of Amazon which will give your phone over 7 days of continuous use without charging <--- AWESOME! Link to a ZeroLemon 5450 mAh Extended Battery: [ http://www.amazon.com/ZeroLemon®-T-Mobile-MetroPCS-Extended-Protector/dp/B00MATB7XS/ ]
There are even other threads and how-to-do guides for waterproofing your triple protection cases and phone by adding gaskets and sealant around the edges!
To sum it up, by getting this device and investing a little time and about $25 bucks or more you end up with a bad ass smart phone that will be ahead of even the newest stock devices out there, on multiple levels, for years to come. You will also have ultimate freedom and control of it as well as the ability to put it on any Network Carrier.. so not only will it be internationally unlocked, you will have in your hands an epic device for under $100 bucks.
--- BASIC PHONE SPECIFICATIONS FOR MS769
Processor: 1 GHz Clock Dual Core TI OMAP 4430 [ http://www.ti.com/product/omap4430 ] <--- This bad boy can be overclocked to 1.3 GHz stable in CyanogenMod! It can also be overvolted and overwatted!
Memory: 1GB of LPDDR3 Memory at 400 MHz
Internal Memory Storage: Anywhere from 1.8GB to 4GB depending on the model
Expandable Memory Storage: Up to 32GB with an External Micro SDHC Card
Screen: 4.7" QHD with Corning Gorilla Glass version 2
Radio: GSM 850/900/1800/1900, UMTS I/II/IV/V* <--- This means you can use this device on AT&T, T-Mobile, Sprint, Verizon and U.S. Cellular which includes all of the subsidy providers such as: SimpleMobile(AT&T/T-Mobile), MetroPCS(T-Mobile), Boost(Sprint), Verizon, etc..
^^^ ONLY AFTER THE BOOTLOADER IS UNLOCKED AND YOU HAVE INSTALLED CYANOGENMOD AND SOME PROVIDERS OFFER FREQUENCIES OF LOWER TIERS SUCH AS THE UNLIMITED 3G NO CONTRACT AT&T ^^^
^^^ ALL YOU WOULD DO IS THEN UNLOCK THE DEVICE SIM SLOT BY GETTING YOUR DEVICE SIM CARD LOCK CODE AND THEN INSERT ANY CARRIER SIM CARD INTO THE SIM CARD SLOT AND YOU WOULD HAVE SERVICE THROUGH THAT PROVIDER ( SEE THE GUIDE FOR GETTING SIM CARD LOCK CODE ) ^^^
--- WHY HAVE PREPAID WIRELESS SERVICE WITH A CRAPPY COMPANY LIKE METRO PCS/T-MOBILE?
Why have prepaid wireless service with a crappy company like Metro PCS/T-Mobile?: With this device you only need to pay for 1 month of service or maybe they have a daily package? Then you can unlock the bootloader, install other Operating Systems/Firmware and put this phone on any GSM/LTE/EDGE/2g/3g/4g network that operates on the radio frequencies that this cell phone supports.
In other words you're paying like $100 bucks for a sweet middle tier phone that you can then put on almost any network... This includes AT&T, T-Mobile, Boost Mobile, SimpleMobile, Metro PCS and lot more unlisted providers in any country in the world. What's even better is that you don't even need to provide these service providers with any personal information because you're paying in full to be on their network.. That means you never have to be subjected to any of their terms of service or any of their policies when you give them a made up name and pay cash for their service.. and trust me you wouldn't like their policies. I say **** contract services.
--- WHY INSTALL CYANOGENMOD ROM/FIRMWARE?
Why install CyanogenMod ROM/Firmware?: You don't have to, but CyanogenMod ROMs/Firmware is the best publicly available Android Firmware in the entire planet. The security of CyanogenMod is top ****ing notch. After you get this installed you can harden your device to be so ****ing secure it rivals a Boeing Black Phone ( A Neo900 will be better though once it comes out ). With the right hardening, the only thing anyone would be able to do remotely is **** with your radio by sending encrypted packets to your radio.. and it would only work
if there's a mechanism in the hardware code to accept such requests, but again, with the right hardening they will be automatically rejected. And it's not just the remote security provided by CyanogenMod Firmware either, you get absolute freedom and full control over almost every aspect of your phone's hardware, software. You can rip games, music, pictures, videos, movies absolutely anything for free. You can then exploit the service providers in most cases and get truly unlimted 4g LTE network speed without throttling. This means you can use your device as an all in one system on the go! You can use it for unlimited high speed internet with low ping and you can wirelessly tether to your laptop/computer effortlessly. With the right software and additional configurations you will get an excellent ping of <=64 ms. All I have to say is..
FREE AND OPEN SOURCE SOFTWARE FOR LIFE!!!!!
BE SURE TO LOOK FOR MY CYANOGENMOD SECURITY HARDENING TUTORIAL!
--- WHY UNLOCK THE BOOTLOADER?
Why unlock the bootloader?: Because you need to unlock the bootloader on this device in order to do all of the above. This device is especially difficult to unlock but as long as you have a device version that is unlockable and all of the requirements this guide will get the job done.
=== CREDITS AND THANKS
You can thank me for writing this. I'm sure most of you couldn't be bothered with the complicated mess of the other guides.
I would also like to thank Lelus, CMahendra and several others for your exploits. Without your work none of this would be possible for this Android device. Above all else I would love to thank the CyanogenMod Team for CyanogenMod! THE BEST ****ING FIRMWARE IN EXISTENCE!
=== USEFUL INFORMATION FOR THE MS769
--- HOW TO BOOT INTO S/W UPGRADE MODE
Remove battery, plug in USB Cable, Hold UP on the volume rocker + Power button for exactly 1 second then insert the battery.
--- HOW TO DO A HARD RESET ON STOCK ROM
With battery inserted, Hold DOWN on the volume rocker + HOME button and then power up the device with the POWER button.
--- HOW TO ACCESS THE LG HIDDEN MENU ON STOCK ROM
On the Dial Pad, press: 3845#*769# OR 3845*#769# to access the LG Hidden Menu.
=== PREREQUISITES
The methods here are very important and you must follow each step accordingly.
Firstly, if your LG MS769 from Metro PCS was manufactured after July, 2013 ( AND POSSIBLY UP TO August, 2013 ) you will *NOT* be able to
unlock the bootloader ( as far as I know, and as of the date of me writing this ),
because Metro PCS/T-Mobile and other providers requested LG to encrypt the bootloader for this device after they found out folks were hacking the bootloader and loading other Firmware and Operating Systems. So you will have to have a version which was manufactured before
July, 2013. You can find out what device you have by looking at the sticker on the housing of your device underneath the battery. Just
remove the back cover, then remove the battery and you will see the sticker with your device information.
If you have one of the unlockable versions continue reading.
Secondly, you absolutely have to be running either Microsoft Windows XP Service Pack 2 or 3, Microsoft Windows Vista or Microsoft Windows 7, have a password on the built in Administrator account that you KNOW and have DOTNET 3.5 installed and updated VCRedist Packages which are:
* VCREDIST 2005 x86
* VCREDIST 2005 x64 <-- Only if your OS is 64 bit
* VCREDIST 2008 x86
* VCREDIST 2008 x64 <-- Only if your OS is 64 bit
* VCREDIST 2010 x86
* VCREDIST 2010 x64 <-- Only if your OS is 64 bit
* VCREDIST 2012 x86
* VCREDIST 2012 x64 <-- Only if your OS is 64 bit
* VCREDIST 2013 x86
* VCREDIST 2013 x64 <-- Only if your OS is 64 bit
You will need both x86 and x64 versions if your Operating System is 64 bit. If your Operating System is 32 bit with a x86 Processor you will not need the x64 versions of the VCREDIST packages.
^^^ ALL OF THESE FILES ARE INCLUDED IN THE ZIP PACKAGE BELOW ^^^
You *cannot* use Microsoft Windows 8 to complete this tutorial because it just won't work ( I couldn't get it to anyway ), there are too many compatibility issues with the software in this guide to get it done. Sorry Linux users! Linux doesn't work either so don't even try it with WINE. This also will not work in a virtual machine. If you have an extra laptop/PC laying around I'd suggest you go and download Microsoft Windows Vista or Microsoft Windows 7. You can get these for free now off TechNet if you still have a TechNet account, or maybe an installation disc if you have one, or you could just download it for free from TPB. I can't post links to TPB here in this forum, but just go check around, actually it's not illegal to download if you don't crack the OS, you're just evaluating it so that you can complete this guide and then reinstall your regular OS.
Also be sure to enable the: *View Files with known File Extensions* option within the *Folder* options in your Microsoft Windows Control Panel Options, and also enable the *View Hidden Files and Folders* Option.
=== MORE PREREQUISITES
* Activated Metro PCS LG Optimus L9 MS769 with Battery <-- Must be activated with an active mobile data connection to unlock bootloader later.
* Metro PCS Sim Card
* External SD Card <-- YOU ABSOLUTELY NEED ONE OF THESE AT LEAST 2GB IN SIZE
* USB Adapter Cable for MS769
Within this guide you will see a link to a .zip file which is hosted on Mega ( formerly MegaUpload ). This .zip file is around 2GB in size.
The .zip file is a package and this package has everything that you will need to complete this guide.
Start now by downloading this package at this link: [ https://mega.co.nz/#!9xBgQQgS!kR14urR1Gd3w_cu8mHbwIQ8urFfiA5bIpgaGgZ-2PPg ]
Now unzip the .zip package that you just downloaded.
This package is very organized.
Within this package that you just unzipped there will be directories named:
* LG L9 - P769\Device SDCard Packages
* LG L9 - P769\Lelus' Tools
* LG L9 - P769\LG Device Firmware Packs
* LG L9 - P769\LG Device USB Drivers
* LG L9 - P769\LG Firmware Utilities
* LG L9 - P769\SHTTPS
* LG L9 - P769\Microsoft Windows Additions
* Guide.txt
Before this first step you need to find out what version of Android that your device is running, on your device, go to Settings->About Phone->Software Information and take note of what version of Android is installed on your device, whether it be JellyBean or Ice Cream
Sandwich. Now go ahead and do a full System Reset from Settings->Backup and Restore->System Reset. Your device needs to be reset to factory settings and all apps removed before we begin.
Let's get started!
Go to post #2
---------------------------------------------------
=== SETTING UP
*** STEP 1: Open the folder/directory named: *Device SDCard Packages*, plug your MS769 Device into your computer, select *Storage Mode* on your MS769, now copy all of the folders within this directory to a new folder in the root of your device external SD Card storage and name the folder: *TOOLS*.
So it should look like this on your SD Card:
* External SD Card\TOOLS\APKs
* External SD Card\TOOLS\CyanogenMod
* External SD Card\TOOLS\Firmware Patches
* External SD Card\TOOLS\gApps
* External SD Card\TOOLS\RAW Files
* External SD Card\TOOLS\Recovery Images
Assuming that you have a fresh installation of Microsoft Windows XP/Vista/7
*** STEP 2: Open the folder/directory named: *LG Device USB Drivers* and install the executable named: *LGUnitedMobileDriver_S4981MAN38AP22_ML_WHQL_Ver_3.8.1* and also the executable named: *LGPCSuite_Setup.exe*
*** STEP 3: Open the folder/directory named: *Lelus' Tools*, copy whichever folder is your Android version. If you have JellyBean installed on your Android device, copy the folder named: *JellyBean*; if you have Ice Cream Sandwich installed on your device, copy the folder named: *Ice Cream Sandwich*.
Now Open the C:\ partition on your Microsoft Windows Installation and paste the folder that you copied here and then rename the folder to: *Lelus*
*** STEP 4: Disconnect your device from the USB Cable and go to Settings and enable Developer USB Mode and enable Allow Installing Applications from Unknown Sources, now for the USB Mode select: *LG Software Utility* and reconnect your device back into your computer.
Now open a Command Prompt as an administrator and type the command: *cd C:\Lelus* <--- without the asterisk characters. Then type the command: *rootL9.bat* <--- without the asterisk characters. The command prompt window will show that it is starting adb on a network port and then it will exploit your Android and root it, after that the command prompt window will show that it is sending the SuperUser and BusyBox packages to your device, then your device will reboot.
After your device reboots, navigate to the File Manager application on your device and then navigate to: *External SD Card\TOOLS\APKs\* and then select the APK package that is named: *L9RecoveryInstaller_1.5.0.apk* and install it. Open the L9 Recovery Installer Application that you just installed and press the option to install recovery, then press the option for CWM/TWRP, and then press the option to reboot into recovery.
After you have rebooted into Clock Work Mod Recovery make a backup of your stock ROM, then reboot back into your ROM and transfer that backup to your computer.
***** DO NOT TRY TO INSTALL ANY ROMS AT THIS POINT! YOUR BOOTLOADER IS STILL LOCKED AND YOU WILL BRICK YOUR DEVICE IF YOU TRY*****
*** STEP 4.5: Open the Start Menu on Microsoft Windows, in the search bar on the bottom type: *Notepad* <--- without the asterisk characters, right click Notepad and select: *Run as administrator*, select the administrator account and type in your password if required, now open the HOSTS file located at: *C:\Windows\System32\drivers\etc\HOSTS* <-- the HOSTS file does not have a file extension, so it won't show up in this window until you select the: *Show All Files* option here.
With the HOSTS file opened in Notepad go ahead and add these lines right below the comment character ( comment characters are a # symbol ):
127.0.0.1 csmg.lgmobile.com
127.0.0.1 csmgdl.lgmobile.com
Save it and proceed to the next step.
*** STEP 5: Copy the folder/directory named: *SHTTPS* that is within the .zip package you downloaded for this guide, open the C:\ partition of your Microsoft Windows Installation and paste the folder you copied. Now open the folder and execute the: *HTTP.exe* file. <--- DO NOT RUN THIS FILE AS AN ADMINISTRATOR, JUST RUN IT NORMALLY. If you are prompted to allow this executable inbound/outbound on the Windows Software Firewall click yes/allow.
=== GETTIN' 'ER DONE
*** STEP 6: Copy the folder/directory named: *LG Firmware Utilities* that is within the .zip package you downloaded for this guide, open the C:\ partition of your Microsoft Windows Installation and paste the folder you copied. Now rename the folder to: *LGTool*, open the folder and execute the executable that is named: *msxml.exe* and wait for this to completely install. Now within this same directory there are 2 other executables which are named: *B2CAppSetup.exe* and *UpTestEX_mod2_marwin.exe*. You will need to right click the first one, select properties then select run compatibility for: *Windows XP Service Pack 2* then click the check box for *Run as Administrator* and click apply, now do the same thing to the second executable which is named: *UpTestEX_mod2_marwin.exe*.
Make sure that your computer is connected to the Internet at this point or this next part will not work. Now execute the executable named: *B2CAppSetup.exe* let it finish loading and when it says no network just close it. Now execute the executable named: *UpTestEX_mod2_marwin.exe* With this window loaded, for the option: *Select Type* you need to select: *3GQCT*, and for the option: *Select KDZ File*, open the file within the package you unzipped ( from the .zip you downloaded from this guide ), The .KDZ file that you need to open is within this folder/directory:
*** LG L9 - P769\LG Device Firmware Packs\Europe\Unlock Bootloader\V20B_00.kdz *** <-- select this .KDZ file for the flash and select the DIAG mode option in the LG KDZ Flash Tool.
Now Click: *Normal Web Upgrade Test* then on the next pop up window click: *Upgrade Start*
*** STEP 6 NOTES: OK THE WAY THIS WORKS IS YOU'RE USING THE SHTTP WEB SERVER AND A MODIFIED WINDOWS HOST FILE TO TRICK THE LG KDZ FLASH TOOL INTO THINKING THAT IT IS CONNECTING TO THE OFFICIAL LG SERVERS TO CHECK FOR AN UPDATE. BY DOING THIS WE ARE ABLE TO FLASH ANY LG KDZ FIRMWARE PACK OFFLINE. YOU MAY OR MAY NOT GET AN APPLICATION CRASH ON THE LG R&D TEST TOOL, IF THE APPLICATION CRASHES JUST CLOSE IT THEN DISCONNECT YOUR DEVICE FROM THE USB CABLE AND RECONNECT, BUT DO NOT REBOOT THE DEVICE OR PULL THE BATTERY. YOUR DEVICE SHOULD DISPLAY A SCREEN THAT SAYS: *S/W UPGRADE MODE* AFTER YOU HAVE RECONNECTED YOUR DEVICE TO THE USB CABLE ALLOW WINDOWS TO FIND ALL OF THE DRIVERS FOR YOUR DEVICE AUTOMATICALLY AND THEN RE-LAUNCH/RE-EXECUTE THE LG KDZ FLASH TOOL ( *UpTestEX_mod2_marwin.exe* ) AND START THE LAST PART OF STEP #6 OVER AGAIN. FOR STEP #7 YOU WILL NEED TO BE QUICK SO YOU CAN DO THE SWITCHAROO ON THE BIN FILE.
*** STEP 7: Open the folder/directory: *LG L9 - P769\LG Device Firmware Packs\Europe\Unlock Bootloader\Replacement BIN\* <--- in this directory there is a .BIN file which is named: *LGP760_AP[11].BIN* When the LG KDZ Flash Tool reports that it is at 32% you will need to quickly open the *Computer* interface on the Microsoft Windows start menu then quickly paste this string: ( C:\ProgramData\LGMOBILEAX\Phone ) <-- without the brace characters, into the location link bar at the top. Then when that directory shows that there is a file being unpacked with that same file name that you copied you will then have to quicky press *CTRL+V* on your keyboard to overwrite that file with the file that you copied, you will most likely be prompted to overwrite the file as an administrator and you have around 20 seconds to complete the prompts before that BIN file is loaded into your device firmware.
*** STEP 7 NOTES: Once the LG KDZ Flash Tool has completed uploading the European ROM/Firmware your device will restart and be recognized by your computer as a P760 version. Now comes the very frustrating part, I'm really sorry about this but everything is now both inverted and mirrored, so all of your screen presses will be mirrored. As far as I know the only way to unlock
the bootloader is with this ROM exploit. To make things easier you can navigate to Developer Settings and enable the Visible Screen Presses option so you can see where you are pressing on the screen. Flashing this European P760 KDZ Firmware Pack causes the P769 to become inverted. We flash the Europe Open ROM that is designed for the P760 onto the MS769/P769 with a locked bootloader because doing this will allow for unlocking the bootloader. Essentially what happened is LG allowed for the P760 bootloader to be unlocked in Europe on European Cell Phone Service Providers Networks, LG released an update for the P760s over the air that allowed for it to be unlocked, now since we have this KDZ pack that allows for that unlocking of the bootloader we can flash it onto the P769 and wallah! It's unlockable after that!
*** STEP 7.5: On your device, you now need to navigate to the USB mode options, just disconnect your device from the USB Cable then reconnect and it will show the connection type options make sure it is on *LG Software Mode*. Then disconnect your device from the USB Cable again and navigate to System->Developer Options and enable USB debugging and also enable installing applications
from unknown sources and finally reconnect your device to the USB Cable.
*** STEP 8: Now you will need to reroot your device again, open a Command Prompt as an administrator and type this command: *cd C:\Lelus\* <--- without the asterisk characters. Then type the command: *rootL9.bat* <--- without the asterisk characters.
The Command Prompt window will show that it is sending the SuperUser and BusyBox APK packages to the device, then your device will reboot ( if it doesn't reboot by itself you will need to reboot it ) and you will be rooted again with SuperUser and BusyBox installed.
Now you have to manage to open the File Manager on your device and install the APK package that is named: *L9RecoveryInstaller_1.5.0.APK* <-- this .APK package was copied to your device in STEP #1. The location of the APK package is: *External SD Card\TOOLS\APKs\* <-- however if you want to make it much easier with the wonky touch screen you can drop that APK package to the root of your SD Card so you don't have to click more folders.
*** STEP 9: With the L9 Recovery Installer installed on your device, open the L9 Recovery Installer application now and press: *Install Recovery*, then press: *Recovery for TWRP/CWM*.
*** STEP 9 NOTES: It is going to be so incredibly frustrating to press icons and navigate this backwards, inverted, mirror European firmware, but don't give up because you're almost done! Just remember that it's not only mirrored, but it's also inverted too! If you held your device up in front of a mirror you would be able to read it! But hey, just play around with it for a while you will figure it out.
It's a ***** let me tell you! just try to press areas under the confirmation window buttons and you will see how to get it done. Once you have the L9 Recovery installed go ahead and click the *Reboot into Recovery* option within the L9 Recovery Installer application window on your device.
*** STEP 10: Once your device reboots, you will be back in Clock Work Mod Recovery. Now you need to select the option: *Install .ZIP From SD Card*. Navigate to: *External SD Card\TOOLS\Firmware Patches\* and select the .zip file named: *radio.zip* and install it.
Then reboot the phone with the reboot option in Clock Work Mod Recovery. Once your device has rebooted back into the European ROM/Firmware unlock the screen and let it sit for 35 minutes. Make sure you have at least 1 bar on the reception icon or this won't work. Let it sit for 35 minutes then come back.
*** STEP 10 NOTES: The reason you are waiting at least 35 minutes: since you flashed the Europe Open ROM which allows for unlocking the bootloader on the P769, you now need to allow the phone to communicate with the LG servers which will send the command to your phone that allows you to reboot into the bootloader. It takes some time for this to happen, I have seen people say it
takes 35 minutes to 1 hour or more. In my own experience I only needed to wait 35 minutes, just make sure you have a good signal with at least the 3g icon or 4g/H/H+ symbol on your bars for it to work. I have also read elsewhere in my research that some people got it to work with their wifi on on top of being connected to the mobile network. If at first this next part does not work, keep trying because it will eventually work. If it doesn't work with the wifi off try it again with the wifi on, etc..
=== UNLOCKING THE BOOTLOADER
*** STEP 11: Get back on your computer and open a Command Prompt as an administrator and type the command: *cd C:\Lelus\stuff* <--- without the asterisk characters. Then type the command: *adb devices* <--- without the asterisk characters, if all is well you should have an alphanumeric string printed in your command prompt window which indicates that your device is connected
and recognized on your computer by ADB, now type the command: *adb reboot oem-unlock* <--- without the asterisk characters. If everything was done correctly your phone will reboot and you will be greeted with the fastboot OEM Unlock screen, press up on the volume rocker to permanently unlock the bootloader!!!
Now type the command: *fastboot flash recovery CWM_Touch.img* <--- without the asterisk characters. The command prompt window will show that it sent the Clock Work Mod Touch Image to the recovery partition on your device.
Now you will need to reboot the device into recovery by typing the command: *fastboot reboot recovery* <--- without the asterisk characters.
If it doesn't reboot into recovery for you then you will need to reboot into recovery by going back to the L9 Recovery Installer Application and press the option to reboot into recovery, or when rebooting your phone now that you have recovery installed the LED lights on the bottom of your phone ( Back button, Menu button ) will light up upon booting into a stock ROM, just press down on the volume rocker to boot into Clock Work Mod Recovery.
=== UNDOING THE DAMAGE FROM THE EUROPE OPEN ROM/FIRMWARE
*** STEP 12: With Clock Work Mod Recovery Touch menu booted ( Avoid using the touch screen and instead use volume up and down to move up/down and power button to select ), select: *Install .ZIP from SD Card*, then navigate back to: *External SD Card\TOOLS\Firmware Pacthes\* and install the files that are named: *20f u-boot.zip*, *cwm_ts_fix_p769.zip*, *v6.bin.zip*, and *radio.zip* one after the other.
Okay now that you have undone the noticeable damage from the Europe Open ROM/Firmware you can restore the original stock rom that you originally had installed on your device. Go ahead and select the Mounts and Storage option then Format the /system/, /cache/ and /data/ partitions, now go back and select the Backup/Restore option and restore the backup image of your stock ROM. Now reboot your device from Clock Work Mod Recovery.
Now take a breather for a couple of minutes.
OK, now that you're rested up and you understand everything you just did you can overwrite your firmware with a fully stock KDZ. Doing that at this point will completely overwrite all firmware code and remove any other damage from the Europe Open ROM. So go ahead and plug your device back into your computer and select: *LG Software Suite* for the USB connection mode. Then fire up the LG KDZ Flash Tool again. Now download the T-Mobile V20H KDZ Firmware Pack for P769 devices here: [
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW959486573210987654321/V20H_00.kdz ]. Now flash that KDZ. Good thing about this latest KDZ Pack is it will also upgrade your baseband to the newest T-Mobile baseband for the P769. If you were using this guide for a P769 device that was released outside of the United States and you are using it now outside of the United States you can download the appropriate KDZ
from a list in this thread post #1: http://forum.xda-developers.com/showthread.php?t=2107971
=== INSTALLING CYANOGENMOD ROM/FIRMWARE 11 KitKat 4.4.4
*** STEP 13: After you have upgraded your stock firmware in Step #12 you will now need to install Clock Work Mod Recovery again, but this time you're going to install the latest version of it for the P769, being version 6.0.4.9 and you need this version in order to install any CM11 Firmware Image. I suggest you install KANG CyanogenMod 11 KitKat 4.4.4 because this one is the absolute best out of all of them, it is the most updated, stable and it has SELinux enabled and enforcing.
Go ahead and open the directory you unzipped from the .zip package you downloaded in this guide and navigate to the folder named: *CMahendra Tools*, copy this folder to the root of your Device SD Card, then install the eu.chainfire.supersu-1.apk, then install the LGPWN.apk and finally the com.cgollner.flashify-1.apk. Open the LGPWN application and select *Root Me* then go through the prompts and then select restore
backup. Once it restores your Device will reboot and you will have root again, now open the Flashify Recovery Image Flasher application, allow it root access when it prompts for it, then select flash recovery, select file, then navigate to Tools on your SD Card then Recovery Images and select the file named: *recovery-6.0.4.9-p769.img*. Now download the newest KANG CyanogenMod 11 KitKat 4.4.4 at this link: [
https://www.androidfilehost.com/?w=files&flid=18559 ] <--- AND MAKE SURE YOU GET THE ONE THAT IS FOR P769 AS INDICATED IN THE FILE NAME HERE. Also download the latest gApps for this ROM here: http://forum.xda-developers.com/showthread.php?t=2397942. Copy both the CM11 zip and the gApps zip to your SD Card, boot into Clock Work Mod Recovery and, Format /boot/, /system/, /cache/, /data/, and /persist/, then install the CM11 zip and the gApps zips. Reboot and you're done! Enjoy it!
=== GETTING THE SIM UNLOCK CODE
In order to put this device on other carriers such as AT&T, SimpleMobile and what have you, you will need to get the SIM Unlock Code either from various methods posted on this forum or by calling Metro PCS and asking them for the code. If you tell them you intend to go out of the country for business they will give you the code over the phone, if they try to say: "durr you can't have it unless you have 3 months of service with us" just tell them you are a US Citizen and Obama passed a law that says they have to give you the code. Worked for me anyway! LOL. If not there are other guides here that will get it done for you for free.
=== END OF TUTORIAL/GUIDE
Congratulations! You have completed the guide!
Always keep your CyanogenMod Firmware and gApps up to date so you always have the latest and the greatest!
---------------------------------------------------
That's it! You're all done!
If you liked my simplified guide let me know by saying thanks!
Thank you for reading!
And enjoy your unlocked Bootloader and CyanogenMod 11 KitKat Firmware!
Can it work with just the regular P769? Also, the sticker on the back doesn't contain the date anywhere I can see, but if I go in to the hidden menu, it says my device is August 14 2013. Am I out of luck? Thank you so much for such an easy to follow guide. I didn't even want to bother with other people's guides because they are such a mess.
hmm got secure boot error.... grr, i got a big issue now... went back to 10g and my screen is still messed up?!?!
Cobra11Murderer said:
hmm got secure boot error.... grr, i got a big issue now... went back to 10g and my screen is still messed up?!?!
Click to expand...
Click to collapse
**** sorry bro I actually forgot to add some steps at the end of the guide. Just sit tight everyone I'm in the process of updating the guide and reuploading the .zip file now.. I left it uploading while I went to work and it just keeps stopping at like 22% I have no ****ing clue why but I'm reuploading now. I just got off work, tired as **** and got something to eat but now my phone is also soft bricked so I have to update firmware with the S/W update then after that the upload should be done and I'll repost the tutorial with link. Give me like 1-2 hours hopefully. be right back.
Cobra11Murderer said:
hmm got secure boot error.... grr, i got a big issue now... went back to 10g and my screen is still messed up?!?!
Click to expand...
Click to collapse
lol wait a second what the heck?! how are you even doing the guide without the package I uploaded? LOL
CygnusBlack said:
**** sorry bro I actually forgot to add some steps at the end of the guide. Just sit tight everyone I'm in the process of updating the guide and reuploading the .zip file now.. I left it uploading while I went to work and it just keeps stopping at like 22% I have no ****ing clue why but I'm reuploading now. I just got off work, tired as **** and got something to eat but now my phone is also soft bricked so I have to update firmware with the S/W update then after that the upload should be done and I'll repost the tutorial with link. Give me like 1-2 hours hopefully. be right back.
Click to expand...
Click to collapse
Alright everyone the guide is officially complete! Have at it!!!!
Good post.. Gotta admit a little heart broken as I am one of the unfortunates with the encrypted boot loader and stop had a little hope lol
Sent from my LGMS769 using XDA Free mobile app
Somebody123456 said:
Can it work with just the regular P769? Also, the sticker on the back doesn't contain the date anywhere I can see, but if I go in to the hidden menu, it says my device is August 14 2013. Am I out of luck? Thank you so much for such an easy to follow guide. I didn't even want to bother with other people's guides because they are such a mess.
Click to expand...
Click to collapse
Um, can you please answer? Also, I don't see the Mega link anywhere.
There may be hope for you. I'm researching to find out if you can downgrade the rom to get a decrypted bootloader then you'd just follow this guide and you're set. I will post my findings.
Sent from my LG769 using XDA Free mobile app
As far as I know yes it works with the p769.. but again yours is august so I'm thinking you have an encrypted bootloader. But there's hope as I said there may be a way for you to decrypt the bootloader by downgrading to the first mfg rom. Ill let everyone know what I find out.
Sent from my LG769 using XDA Free mobile app
Somebody123456 said:
Um, can you please answer? Also, I don't see the Mega link anywhere.
Click to expand...
Click to collapse
See my above post. I forgot to quote you.. and the mega link is still coming I had to repack the files and its uploading still. My upload speed is around 300kb up so its going to take a while since the new pack is 2gb
Sent from my LG769 using XDA Free mobile app
CygnusBlack said:
There may be hope for you. I'm researching to find out if you can downgrade the rom to get a decrypted bootloader then you'd just follow this guide and you're set. I will post my findings.
Sent from my LG769 using XDA Free mobile app
Click to expand...
Click to collapse
Thank you very much!
CygnusBlack said:
lol wait a second what the heck?! how are you even doing the guide without the package I uploaded? LOL
Click to expand...
Click to collapse
I used another guide.. i used the wrong kdz lol, got the right one and got the radio flashed and all.. waited, and guess what? it just restarted... :| and my phone was made in jan 2013!!!, I tried many times over and over, I think I might need the cable for it.. mine is a TMobile version though but i doubt that makes any difference compared to the Metro's they are exactly the same
Cobra11Murderer said:
I used another guide.. i used the wrong kdz lol, got the right one and got the radio flashed and all.. waited, and guess what? it just restarted... :| and my phone was made in jan 2013!!!, I tried many times over and over, I think I might need the cable for it.. mine is a TMobile version though but i doubt that makes any difference compared to the Metro's they are exactly the same
Click to expand...
Click to collapse
well I was finally able to get it uploaded to Mega. I posted the link in the tutorial post. Since you're using the T-Mobile version what you should do is first downgrade your rom to the oldest T-Mobile rom. There's a post in this forum by CMahendra I think and he put up links to all the roms. Get the oldest tmobile flash that first then flash the Europe open rom like in my tutorial and follow the rest of my tutorial it should work.
Let me know what happens. If it doesn't work you can just flash the firmware patches to fix your screen and touch screen then flash back to stock rom.
CygnusBlack said:
well I was finally able to get it uploaded to Mega. I posted the link in the tutorial post. Since you're using the T-Mobile version what you should do is first downgrade your rom to the oldest T-Mobile rom. There's a post in this forum by CMahendra I think and he put up links to all the roms. Get the oldest tmobile flash that first then flash the Europe open rom like in my tutorial and follow the rest of my tutorial it should work.
Let me know what happens. If it doesn't work you can just flash the firmware patches to fix your screen and touch screen then flash back to stock rom.
Click to expand...
Click to collapse
I actually did do that, in fact.. i was on the latest of tmobile 20h i believe, used fastboot method to go back down to the oldest then went to turkey... when i found out i got the wrong one i fast boot back down again and flashed the correct one still no go.. now my screen is still inverted when flashed back to stock old.. but no biggie ive been using a backup phone lol, i do however need to try again or get it back to original stock state..
if this doesnt unlock im even considering the samsung avant lol
Cobra11Murderer said:
I actually did do that, in fact.. i was on the latest of tmobile 20h i believe, used fastboot method to go back down to the oldest then went to turkey... when i found out i got the wrong one i fast boot back down again and flashed the correct one still no go.. now my screen is still inverted when flashed back to stock old.. but no biggie ive been using a backup phone lol, i do however need to try again or get it back to original stock state..
if this doesnt unlock im even considering the samsung avant lol
Click to expand...
Click to collapse
Try to root it now with that Lelus tool then go to CWM recovery and flash the inverted screen patch + wonky touch screen patch + radio patch. Maybe that will fix it. The Europe rom ****s a lot of stuff up and going to back original rom won't flash the actual firmware back completely. I suspect there's actually more damage/changes from the europe rom since it was hex edited(?) but at least if you flash those it will fix your screen and touch screen and radio.
CygnusBlack said:
Try to root it now with that Lelus tool then go to CWM recovery and flash the inverted screen patch + wonky touch screen patch + radio patch. Maybe that will fix it. The Europe rom ****s a lot of stuff up and going to back original rom won't flash the actual firmware back completely. I suspect there's actually more damage/changes from the europe rom since it was hex edited(?) but at least if you flash those it will fix your screen and touch screen and radio.
Click to expand...
Click to collapse
alrighty will do that now, its updating as i type.. whats even more funny is all drivers are installed on a fresh pc.. this pc i cleared and this is the only device hooked up to it.. the bootloader is def a shoot and miss with this device, thats why im wonderin about the cable that might work, but i have no idea if it will actually.. lol
Cobra11Murderer said:
alrighty will do that now, its updating as i type.. whats even more funny is all drivers are installed on a fresh pc.. this pc i cleared and this is the only device hooked up to it.. the bootloader is def a shoot and miss with this device, thats why im wonderin about the cable that might work, but i have no idea if it will actually.. lol
Click to expand...
Click to collapse
Any progress yet?
edit:nevermind
I know that this handset is not release yet but I'd like to know if there would be support for it from the community. I'm excited about it because I've been waiting for a handset that seems to meet all my niche requirements:
Medium size screen (4.5")
ARMv8 instruction set (Snapdragon 410)
Removable battery (According to quick set up manual)
MicroSD slot (full size SD would have been nice but this is good enough)
Dual Sim (not sure if it will be available in the UK though )
I know the screen is not the best and it probably won't support Qi charging but I don't think any other handset has all the aforementioned features. I'm not trying to sell the handset but this is in anticipation of posts like "why not get a Nexus" or "just get a Moto G"
It's a nice phone, I bought one for my wife
This one is not available in my region. I got the Y550 instead for a relative. Almost the same spec. Not sure about IO performance though as I didn't have time to check.
Solution?
So, I was searching Google for OT 5042 root (the internal name of Alcatel OT Pop 2 or Orange Roya (NOS Roya in Portugal)), and I've found these instructions on a russian forum. I have not tested them myself, but they do seem very legit, so if anyone who knows exactly what he's doing or has no fear of losing the phone can follow it up.
Disclaimer: The procedure that follows has not been yet tested by me. Proceed at your own risk. You are fully responsible for what happens to your phone from now on. If you have some knowledge on russian, please help translating the board mentioned on the Youtube video description (/watch?v=8tD4kR33vVE).
Note on translation: This post was initially writen in russian and translated with Google translate with some fixes here and there made by me. I'm not a native english speaker and therefore some engrish may be present. Please forgive me for it.
Note to users: This tutorial is regarding the dual SIM version of this phone. It may not work with the single SIM one.
Root dual SIM Alcatel Alcatel OneTouch 5042D POP 2 smartphone
Author: ruslan_3_ from 4pda.ru
Procedure:
1. Download the attached .zip file and extract it to some folder on your computer.
1.1. Install the phone's adb drivers (not needed under Linux or OS X; Windows drivers are available on the phone as a CD-ROM);
1.2 Copy update.zip to the root of your phone's internal memory or SD Card (one of the two may not work, and there is different feedback regarding this issue)
2. Turn on USB debugging
3. Turn on the phone in fastboot mode (press and hold both power and volume down buttons);
3.1 Connect the phone to your computer and wait for the drivers to finish installing (when applied);
4. Open a command prompt where you first extraced the files and type:
HTML:
fastboot -i 0x1bbb devices
It will list all devices connected to the computer on fastboot mode, for example a409dc4d.
6. Install CWM Recovery:
HTML:
fastboot -i 0x1bbb flash recovery image-new.img
7. Enter recovery mode (power + volume up)
8. Install update.zip
Once again, please be very carefully when executing this procedure. It can go really wrong.
If you're using Mac or Linux, paste the specific android SDK tools in the extracted folder and run fastboot with the command ./fastboot if you don't have an alias for it in your .profile or .bashrc (if you don't know what this is, ignore it ).
@imTos, Thanks for information, but you know if there is any custom rom (CM or MIUI) for this equipment, specifically for the version of the 5042A one SIM ??
Thank You ...
Regarding the root procedure, I was told on a portuguese board that it works for any 5042 model.
herbesi01 said:
@imTos, Thanks for information, but you know if there is any custom rom (CM or MIUI) for this equipment, specifically for the version of the 5042A one SIM ??
Thank You ...
Click to expand...
Click to collapse
Hey. I am not aware of any alternative ROM currently on the Internet, especially since Alcatel has not released the phone's source code yet. What I do know, however, is that there are three ROMs for this device: Alcatel's original ROM (build 010 03 single/dual SIM), Orange ROM (single SIM) and the portuguese NOS ROM (build 010 06, single SIM). Between the three, as far as I know, the portuguese one is the one that most ressembles AOSP w/ Google Play and with no bloatware installed by default, from what I've seen in pictures. I don't know if it is possible for the users of the different ROMs to make NANDroid backups and share them online, though it wouldn't be a full help. Keep in mind that both chinese and russian ROMS, from what I've read (and I have no way to confirm if this is true or not!), have a function to report stolen phones, and this text messages a foreign number if you're living outside these countries.
Offtopic: I waste more time trying to guess the captcha than replying to a post. Google, where's the new noCaptcha function?
imTos said:
So, I was searching Google for OT 5042 root (the internal name of Alcatel OT Pop 2 or Orange Roya (NOS Roya in Portugal)), and I've found these instructions on a russian forum. I have not tested them myself, but they do seem very legit, so if anyone who knows exactly what he's doing or has no fear of losing the phone can follow it up.
Disclaimer: The procedure that follows has not been yet tested by me. Proceed at your own risk. You are fully responsible for what happens to your phone from now on. If you have some knowledge on russian, please help translating the board mentioned on the Youtube video description (/watch?v=8tD4kR33vVE).
Note on translation: This post was initially writen in russian and translated with Google translate with some fixes here and there made by me. I'm not a native english speaker and therefore some engrish may be present. Please forgive me for it.
Note to users: This tutorial is regarding the dual SIM version of this phone. It may not work with the single SIM one.
Root dual SIM Alcatel Alcatel OneTouch 5042D POP 2 smartphone
Author: ruslan_3_ from 4pda.ru
Procedure:
1. Download the attached .zip file and extract it to some folder on your computer.
1.1. Install the phone's adb drivers (not needed under Linux or OS X; Windows drivers are available on the phone as a CD-ROM);
1.2 Copy update.zip to the root of your phone's SD Card (internal memory may not work)
2. Turn on USB debugging
3. Turn on the phone in fastboot mode (press and hold both power and volume down buttons);
3.1 Connect the phone to your computer and wait for the drivers to finish installing (when applied);
4. Open a command prompt where you first extraced the files and type:
HTML:
fastboot -i 0x1bbb devices
It will list all devices connected to the computer on fastboot mode, for example a409dc4d.
6. Install CWM Recovery:
HTML:
fastboot -i 0x1bbb flash recovery image-new.img
7. Enter recovery mode (power + volume up)
8. Install update.zip
Once again, please be very carefully when executing this procedure. It can go really wrong.
If you're using Mac or Linux, paste the specific android SDK tools in the extracted folder and run fastboot with the command ./fastboot if you don't have an alias for it in your .profile or .bashrc (if you don't know what this is, ignore it ).
Click to expand...
Click to collapse
this method for root work very well on my Orange Roya
thanks for share it
Worked like a charm on single sim
I would love to see running android l on this device! i mean into 5042a
Please
Hi, i did try to root this phone as you show but after some tries this stuck on load, and dont turn on ok...
i did try hard reset, wipe cache, wipe data, erase from fastboot and a lot of things but always keep on Logo... so could you do a backup from your handset and share it with me please?
i will apreciate it a lot. thanks in advance
I've asked for a backup in many online communities, but no luck. As I said, I didn't try the method myself since I didn't need to use root yet and my phone is still under warranty. Sorry.
imTos said:
I've asked for a backup in many online communities, but no luck. As I said, I didn't try the method myself since I didn't need to use root yet and my phone is still under warranty. Sorry.
Click to expand...
Click to collapse
lol mine is under warranty too.
Root it and if u need to send to warranty u can use Mobile Upgrade Q to restore original firmware.
I cant enter in fastboot can anyone help me please
rushwhq said:
lol mine is under warranty too.
Root it and if u need to send to warranty u can use Mobile Upgrade Q to restore original firmware.
Click to expand...
Click to collapse
Are you sure that can be restored By mobile upgrade?
if bricked : recover phone using Alcatel official tool
Mobile Upgrade Q 4.6.8 Setup.rar
goto http://www.alcatelonetouch.com/global-en/products/smartphones/pop_2-4-5.html
and select the "Support" tab, there download
Mobile Upgrade Q 4.6.8 Setup.rar
link:
http://www.alcatelonetouch.com/glob...OP_2-4-5/otu/mobile-upgrade-q-4-6-8-setup.rar
unrar, start and select 5042D, connect phone via USB cable, start flashing
I had my Pop 2 bricked (eternal boot loop) but got it back to life, 100%
---------- Post added at 10:10 PM ---------- Previous post was at 10:05 PM ----------
in the "russian" tutorial they tell you to copy "update.zip" to your SD card - that did not work for me !
- on the external card cwm did not find the file.
instead update.zip was only found once it was on the INTERNAL SD card !!
Hey guys.
I've found very useful information like stock recovery, stock images, and user custom images for this device on the same board I found the root method. I still haven't had the courage to root my device, though, and I feel kind of an hypocrite because of it, but this is my only phone, and if something had gone wrong I would have no money to buy a new one. I know I'm not the only one in this situation, and I do feel really bad for not helping users that have requested for my help.
I need to know if Mobile Upgrade Q can recognize the device and reinstall the ROM if anything goes wrong. To those who had any problem, was it able to fix it? Were you using stock recovery or CWM when you tryed it (I'm not sure if this is relevant)?
I will update this board (or create a new one?) regarding this device with useful information I've found online, and since stock recovery is already available (that was the main reason I didn't root in the first place (warranty)), I will provide a (not rooted) factory image of the custom build 010 06 when I have time to do so.
hey buddy
i restore my to thr original rom with mobile q. but looks like i upgrade the firmware, and now i cant root again, because i cant put in fastboot "vol - + pwr".
Which exactly build do u have ?
imTos said:
Hey guys.
I've found very useful information like stock recovery, stock images, and user custom images for this device on the same board I found the root method. I still haven't had the courage to root my device, though, and I feel kind of an hypocrite because of it, but this is my only phone, and if something had gone wrong I would have no money to buy a new one. I know I'm not the only one in this situation, and I do feel really bad for not helping users that have requested for my help.
I need to know if Mobile Upgrade Q can recognize the device and reinstall the ROM if anything goes wrong. To those who had any problem, was it able to fix it? Were you using stock recovery or CWM when you tryed it (I'm not sure if this is relevant)?
I will update this board (or create a new one?) regarding this device with useful information I've found online, and since stock recovery is already available (that was the main reason I didn't root in the first place (warranty)), I will provide a (not rooted) factory image of the custom build 010 06 when I have time to do so.
Click to expand...
Click to collapse
---------- Post added at 09:17 AM ---------- Previous post was at 08:32 AM ----------
lol i managed to enter fastboot mode via adb command.. =D
hi, mi alcatel pop 2 wass bricked. When I try to unbrick with Mobile Upgrade it say that my phone is updated and it stop.
how can i unbrick my phone??!!
Please a need a backup from a Alcatel POP 2 ROM, i had bricked. Please could anyone upload it?
seryioo write me PM
---------- Post added at 06:26 AM ---------- Previous post was at 06:11 AM ----------
imTos said:
Regarding the root procedure, I was told on a portuguese board that it works for any 5042 model.
Hey. I am not aware of any alternative ROM currently on the Internet, especially since Alcatel has not released the phone's source code yet. What I do know, however, is that there are three ROMs for this device: Alcatel's original ROM (build 010 03 single/dual SIM), Orange ROM (single SIM) and the portuguese NOS ROM (build 010 06, single SIM). Between the three, as far as I know, the portuguese one is the one that most ressembles AOSP w/ Google Play and with no bloatware installed by default, from what I've seen in pictures. I don't know if it is possible for the users of the different ROMs to make NANDroid backups and share them online, though it wouldn't be a full help. Keep in mind that both chinese and russian ROMS, from what I've read (and I have no way to confirm if this is true or not!), have a function to report stolen phones, and this text messages a foreign number if you're living outside these countries.
Offtopic: I waste more time trying to guess the captcha than replying to a post. Google, where's the new noCaptcha function?
Click to expand...
Click to collapse
Hi
Alcatel has release the source code for this model
OT_5042X_20150310.tar.xz
So now can cook some cm rom or anyelse?
rushwhq said:
seryioo write me PM
Click to expand...
Click to collapse
Hi, I have bricked my phone. I tried to restore with Mobile Upgrade and with a Backup from CWM that I did, but with no result.
I would like you did a backup with the last version of TWRP, all partitions and upload:
Download, install like CWM: https://mega.co.nz/#!tQRzibAA!7tPkqlc1BYsvCCeQRzaqn_VVs959GBsleB_4eNVq9JE
Sources TWRP Recovery: http://4pda.ru/forum/index.php?showtopic=645507&st=340#entry38938719
Thank you.