Alright, here's the problem,when the official jb 4.1.2 update came out a few days ago I decided to re-root and try a custom rom (tried on ICS but never was successful, also never bricked). I rooted fine and updated to safestrap 3.11, found a cm 10.1 rom online, went through all the steps but never wiped the stock system so every time I tried to boot it would try to dual boot and not work. I finally realized that i was wiping the rom system and not the stock which was why it would never work. So, wiped both caches, factory reset, and system wiped as per instructed and after that I installed the cm 10.1 in rom slot 1. Rom booted great worked fairly well but was a bit buggy for the first day, installed gapps no problem. After messing with it for a day I decided to switch back to stock system because i had all my contacts on backup assistant which wasnt available on the cm rom. when i tried to restore stock, I realize that somehow my backup got erased or something because all it is is an empty folder and took no time at all to restore, also wont boot. Any suggestions?
Phone specs (idk if it matters): XT912 CDMA Droid RAZR 4.1.2 (or was anyway)
PS. sorry for the super long post, i was kinda venting
http://www.droidrzr.com/index.php/topic/12777-droid-razr-utility-xt912-jellybean-windows-mac-linux-all-in-one/page__pid__227369#entry227369You can try to use this utility to take you back to stock JB:
Wouldn't that just root me and not take me back to OTA JB? I used the same program to re-root after the update from ICS to JB a few days ago.
Matt's Utility also has a "flash back to stock" option.
Alright, I got my phone back on track without needing a factory cable which was the route everything was going until I found a post about a work around by outfieldslayer on droid forums, anyone else who has this problem, just search "HELP battery died during flash!". Thanks to shobon and Gus194 for pointing me in the right direction and special thanks to mattlgroff for his work on the Razr utility!
Related
on ota JB Leak OTA stock.
using safestrap 3.11
rooted.
Yesterday my sound on razr maxx stopped working. Sound profile was up all the way and could make phone calls but speaker was not working.
I read I needed to restore my backup of rom because of the sound problem.
when I restored the system to the stock it would get past safestrap but then it would just blackscreen and vibrate once.
My backup did not work at all on the stock partition. I even tried a factory reset, clearing everything, cache, dalvik, system, etc and it still wouldn't restore.
So then I decided to create another rom slot and try to restore my backup it worked perfectly without an issue and booted right up.
Keep in mind this is with the stock ota jb release, not another version.
My question is how do I get the stock partition back. I tried reflashing the ota update but it needs the ics rom to update. Is there a jelly bean ota that doesn't verify the partition before installing?
Thanks a million!!!
Use this: JB xt912 unbrick utility
then use Razr Blade Root Exploit to gain root again
start all over with ss 3.11
I cannot get my phone into recovery. It will not go back to recovery so I can flash the rom. It just sits there with the android guy laying down for about 3 minutes then doesn't do anything and I have to reset it.
woodgtrplyr said:
I cannot get my phone into recovery. It will not go back to recovery so I can flash the rom. It just sits there with the android guy laying down for about 3 minutes then doesn't do anything and I have to reset it.
Click to expand...
Click to collapse
You have to press vol+ and vol- at the Dame time to get the recovery menu to come up after you see the Android guy laying on his back
Sent from my JellyBeaned Droid RAZR Maxx
Thanks good sir! I found it in another post. KUDOS to you for helping a member out!!:laugh::good:
safestrap 3.11 droid razr rooted jb stock trouble
well my problem is i accidently (stupidly) installed a rom on stock. didnt boot up tho . so of course i had a back up for stock. but it did not boot up visually . the bootanimation does sound off . but thats it . black screen. luckily im able to use stock 1 to apply other rom. but im need to want to get stock back. any help would be well helpful.
freddyfingaz said:
well my problem is i accidently (stupidly) installed a rom on stock. didnt boot up tho . so of course i had a back up for stock. but it did not boot up visually . the bootanimation does sound off . but thats it . black screen. luckily im able to use stock 1 to apply other rom. but im need to want to get stock back. any help would be well helpful.
Click to expand...
Click to collapse
You just need to follow this guide exactly
http://www.droidrzr.com/index.php?/topic/7701-How-to-recover-the-Stock-slot-on-XT912-running-JB-OTA
Sent from my JellyBeaned Droid RAZR Maxx
Hey y'all, here is the situation I need help with....
While I have years of experience flashing, rooting and the rest, I made the noob mistake of not actually paying attention to everything and now I have problems. I have the OG Droid Razr MAXX running the JB Kernel with Safestrap 3.11 installed. While checking out some of the other ROMs out there in various slots I somehow wiped the system on my stock ROM slot, and now cannot get anything to install properly there, and cannot boot from there.
I can run ROMs from the other slots, but have also somehow now horked Slot 1 trying to recover, and have only Slot 2 working. Biggest problem is space available, since the other partitions are still there.
What can I do to just completely start over, with a fully wiped phone since I am now on JB? Not sure if I can go ahead and use Matt's utility or not, I would like to get it as close to factory as possible and then go from there.
Any help is greatly appreciated!!
Peter
I have done the exact same thing. Have you found a solution yet?
I have no clue how exactly you managed to erase your stock ROM, however, try using Droid Utility 1.82 and restore your phone completely. Then you can re-root your phone and go on from there.
However, this is to be only used with the ICS kernel otherwise you'll brick but you wiped your entire stock ROM which makes me wonder if this would actually work since the stock ROM is now gone and you're running a non-official kernel.
I got the same problem here, i followed (at least I think I did) the tutorial and got myself in the same situation ....
I can't paste links but if someone wants to post this information feel free: h t t p : / / pastebin . com / F8sr8SBm
Essentially you need to flash the stock firmware back on to the device then re-root, I don't believe you can use the stock rom slot for anything but the stock firmware.
Also note that the flash took 10 minutes, but it took about 16 minutes total for the phone to reboot. So once flashed it takes about 6 minutes for Android to boot up.
Now that I think of it, did any of you try to wait for Android to boot up for 10 minutes or more on the stock rom? Anyways I'm back to Square 1 now, at least the phone works.
Ok, so my Droid RAZR MAXX is still on Android 4.0.4. It is rooted and I've tried SO MANY different things to do the OTA update. Most recently I backed everything up, temp un-rooted & did a factory data reset, then tried updating again. I may have removed a program with TitaniumBackup so the update may be failing the check. Though I don't know how to see which program was removed.
How do I manually update to stock 4.1.2? Yes, I searched but I either didn't find it or I did and it got lost among the many tabs I had open trying to find the answer.
help...
Have you tried this? http://www.droidrzr.com/index.php/t...inux-all-in-one/page__pid__227369#entry227369
I did see that before I was ready to wipe everything on my phone and forgot about it, I'll give it a try.
Ok, so that worked. Wow, wish I tried that a long time ago. Thanks!
amlamarra said:
Ok, so my Droid RAZR MAXX is still on Android 4.0.4. It is rooted and I've tried SO MANY different things to do the OTA update. Most recently I backed everything up, temp un-rooted & did a factory data reset, then tried updating again. I may have removed a program with TitaniumBackup so the update may be failing the check. Though I don't know how to see which program was removed.
How do I manually update to stock 4.1.2? Yes, I searched but I either didn't find it or I did and it got lost among the many tabs I had open trying to find the answer.
help...
Click to expand...
Click to collapse
Wow, I am having the exact same issue. Matter of fact I posted here too but did not get a reply but have seen the utility you used. Guess I will give that a shot. Of course I already did a factory reset and to no avail, it didn't work. Not sure what I could have done to cause the issue with no OTA success, but I will now try the Utility. Glad you posted and someone answered.
Matt's Utility is amazing. Saved me a lot of time trying to fix problems and its a one stop shop for the OTA update and rooting your phone. Just be aware that this puts you on the .16 kernel and I only know of 6 roms that will work with it right now and not put you in a boot loop (which was my orig problem.)
renrut23 said:
Matt's Utility is amazing. Saved me a lot of time trying to fix problems and its a one stop shop for the OTA update and rooting your phone. Just be aware that this puts you on the .16 kernel and I only know of 6 roms that will work with it right now and not put you in a boot loop (which was my orig problem.)
Click to expand...
Click to collapse
http://www.droidrzr.com/index.php/t...l-switch-between-jellybean-kernels-with-ease/
You can use that to take you to the .8 leak so you can install ROMs based on the leak
Hello everyone. I'm a noob.
I have a Droid X2 and Verizon service. It was running Gingerbread 2.3.5 and version 1.3.418, and up until yesterday I hadn't even rooted it. I followed these instructions for CM10 carefully but apparently made a slight mistake.
I made sure to root properly: Superuser worked perfectly, I had Busybox, NANDroid, and Bootstrap Recovery all working, and the phone worked just like before.
In the tutorial I linked to above, I think I know where I went wrong. I downloaded GAPPS 4.2.2 (funky wording since he said 'latest' and then '4.1.x' , so not the latest) and then CM10 A3. I then went into BSR and installed from the external SD card. GAPPS succeeded, but CM10 did not (Status 7, some kernel disapproval or something). When I booted the phone after that, MultiTouch keyboard couldn't start and so I just froze it with Titanium Backup and used Swype because it was annoying. The next thing I tried came from another xda thread (that I seem to have misplaced) saying that removing the top 2 lines of META-INF/com/google/android/updater-script would make it work. I'm pretty sure this failed similarly to before. I then tried wiping all data (since I had backed it up 3 different ways) and installing CM10. It still didn't work, and when I booted I got to my current state of purgatory.
Now when I boot, it tries to run the initial setup but that crashes (and multitouch keyboard crashes too). I've probably lost root access and currently don't have Titanium Backup or any other method to restore from backup since the programs were wiped. I've been trying to do an SBK factory reset using RSD Lite, but the phone won't go into RSD mode.
At this point I just want a working phone again and I'm not sure what to do.
TL;DR: Used the wrong GAPPS version when installing CM10 A3, decided to wipe all my data and try the install, now I'm stuck in neutral.
I guess the internet lied and gave me the wrong SBK the first time. Setup did work, and it wasn't RSD like I had thought.
I still would like to know what went wrong the first time through, and why it seemed like I wasn't able to overwrite the incorrect GAPPS version I had first installed. Once I saw my mistake I did use the correct version and nothing changed.
Dasoccerguy said:
I guess the internet lied and gave me the wrong SBK the first time. Setup did work, and it wasn't RSD like I had thought.
I still would like to know what went wrong the first time through, and why it seemed like I wasn't able to overwrite the incorrect GAPPS version I had first installed. Once I saw my mistake I did use the correct version and nothing changed.
Click to expand...
Click to collapse
Did you get it working then? Were you running A2 before hand?
Dasoccerguy said:
Hello everyone. I'm a noob.
I have a Droid X2 and Verizon service. It was running Gingerbread 2.3.5 and version 1.3.418, and up until yesterday I hadn't even rooted it. I followed these instructions for CM10 carefully but apparently made a slight mistake.
I made sure to root properly: Superuser worked perfectly, I had Busybox, NANDroid, and Bootstrap Recovery all working, and the phone worked just like before.
In the tutorial I linked to above, I think I know where I went wrong. I downloaded GAPPS 4.2.2 (funky wording since he said 'latest' and then '4.1.x' , so not the latest) and then CM10 A3. I then went into BSR and installed from the external SD card. GAPPS succeeded, but CM10 did not (Status 7, some kernel disapproval or something). When I booted the phone after that, MultiTouch keyboard couldn't start and so I just froze it with Titanium Backup and used Swype because it was annoying. The next thing I tried came from another xda thread (that I seem to have misplaced) saying that removing the top 2 lines of META-INF/com/google/android/updater-script would make it work. I'm pretty sure this failed similarly to before. I then tried wiping all data (since I had backed it up 3 different ways) and installing CM10. It still didn't work, and when I booted I got to my current state of purgatory.
Now when I boot, it tries to run the initial setup but that crashes (and multitouch keyboard crashes too). I've probably lost root access and currently don't have Titanium Backup or any other method to restore from backup since the programs were wiped. I've been trying to do an SBK factory reset using RSD Lite, but the phone won't go into RSD mode.
At this point I just want a working phone again and I'm not sure what to do.
TL;DR: Used the wrong GAPPS version when installing CM10 A3, decided to wipe all my data and try the install, now I'm stuck in neutral.
Click to expand...
Click to collapse
you state in the beginning that you are on 2.3.5. it is crazy that you were even able to flash cm10. it is made for 2.3.4 . and DZKs OP on cm10 is a bit sketchy in the wording and severly outdated.
there are a few things you need to do in order to get BSR working inside of A3 , as well as needing the GAPPS for 4.1.X and not 4.2.2 this is only cm10 , not 10.1 .
you need to SBF back to 2.3.4 (google EZsbf for droid x2) it is way easier than trying to use rsdlite for a "noob" , and then root. then follow the steps you completed to get where you are now, except use the right gapps.
THEN: (this is not in the OP for cm10 ) , perform THIS : http://forum.xda-developers.com/showpost.php?p=37698274&postcount=1573 in order to get the patched cm7 bootstrap working. DO NOT try to use the regular BSR .
i can try to help as i get back to my computer here and there, but hopefully others pitch in , as i dont have that much time. hope this helped.
Simpsons11 said:
Did you get it working then? Were you running A2 before hand?
Click to expand...
Click to collapse
I got back to 2.3.5 and restored all my apps and data, so I called it a night. Well... the sun had come up, but same idea. Like I said, up until yesterday I had yet to even root the phone, so I was just running the stock version of Android given to me by Verizon.
Lorenzo VonMatterhorn said:
you state in the beginning that you are on 2.3.5. it is crazy that you were even able to flash cm10. it is made for 2.3.4 . and DZKs OP on cm10 is a bit sketchy in the wording and severly outdated.
there are a few things you need to do in order to get BSR working inside of A3 , as well as needing the GAPPS for 4.1.X and not 4.2.2 this is only cm10 , not 10.1 .
you need to SBF back to 2.3.4 (google EZsbf for droid x2) it is way easier than trying to use rsdlite for a "noob" , and then root. then follow the steps you completed to get where you are now, except use the right gapps.
THEN: (this is not in the OP for cm10 ) , perform THIS : http://forum.xda-developers.com/showpost.php?p=37698274&postcount=1573 in order to get the patched cm7 bootstrap working. DO NOT try to use the regular BSR .
i can try to help as i get back to my computer here and there, but hopefully others pitch in , as i dont have that much time. hope this helped.
Click to expand...
Click to collapse
I wasn't able to flash CM10. I was able to flash GAPPS 4.2.2, but then unable to flash GAPPS 4.1.x over that installation.
And is it really that outdated and sketchy? The version of CM10 I was trying to flash was made on January 11, 2013. Correct me if I'm wrong, but Gingerbread 2.3.5 is almost 2 years old now, right? It's surprising that I'd have to go back to the previous version.
I may try out your suggestions later, but 8 hours of fiddling with my phone yesterday wore me out a little (a lot). Thanks!
Dasoccerguy said:
I got back to 2.3.5 and restored all my apps and data, so I called it a night. Well... the sun had come up, but same idea. Like I said, up until yesterday I had yet to even root the phone, so I was just running the stock version of Android given to me by Verizon.
I wasn't able to flash CM10. I was able to flash GAPPS 4.2.2, but then unable to flash GAPPS 4.1.x over that installation.
And is it really that outdated and sketchy? The version of CM10 I was trying to flash was made on January 11, 2013. Correct me if I'm wrong, but Gingerbread 2.3.5 is almost 2 years old now, right? It's surprising that I'd have to go back to the previous version.
I may try out your suggestions later, but 8 hours of fiddling with my phone yesterday wore me out a little (a lot). Thanks!
Click to expand...
Click to collapse
the OP for cm10 hasnt really been updated since alpha 1 . so yeah it is outdated. alpha 2 had a non working wifi module that was never even mentioned in the OP and had to be figured out by the droid x2 community. alpha 3 had the working wifi back in, but did not have the proper Hijack.zip in place in the system files, whereas the old versions did. this was also never mentioned in the OP.
watch this video. it may help.
http://www.youtube.com/watch?v=HJdvyufvYp0
the dude who made this video also has DOZENS of how-to videos for the droid x2 on his channel. just search for it on youtube. (ex: how to sbf droid x2)
sbfing your phone to 2.3.4 , using EZSBF , shouldnt take more than 15 minutes.
2.3.5 re-introduced a lot of issues that we had with 2.3.4, so most devs base their roms around 2.3.4. in fact, there are really only two roms for 2.3.5 worth trying out, Eclipse, and gingerbread phone , 7 and they are both gingerbread. :crying:
if you read up on what needs to be done, the whole process of SBF, ROOT, and flash cm10 THEN gapps, should all take less than an hour, even for someone who is fairly inexperienced.
i wasnt trying to dog DZK's post for cm10. i was only stating that if you follow HIS instructions, it is confusing as hell.
Lorenzo VonMatterhorn said:
the OP for cm10 hasnt really been updated since alpha 1 . so yeah it is outdated. alpha 2 had a non working wifi module that was never even mentioned in the OP and had to be figured out by the droid x2 community. alpha 3 had the working wifi back in, but did not have the proper Hijack.zip in place in the system files, whereas the old versions did. this was also never mentioned in the OP.
watch this video. it may help.
youtubelink
the dude who made this video also has DOZENS of how-to videos for the droid x2 on his channel. just search for it on youtube. (ex: how to sbf droid x2)
sbfing your phone to 2.3.4 , using EZSBF , shouldnt take more than 15 minutes.
2.3.5 re-introduced a lot of issues that we had with 2.3.4, so most devs base their roms around 2.3.4. in fact, there are really only two roms for 2.3.5 worth trying out, Eclipse, and gingerbread phone , 7 and they are both gingerbread. :crying:
if you read up on what needs to be done, the whole process of SBF, ROOT, and flash cm10 THEN gapps, should all take less than an hour, even for someone who is fairly inexperienced.
i wasnt trying to dog DZK's post for cm10. i was only stating that if you follow HIS instructions, it is confusing as hell.
Click to expand...
Click to collapse
Thanks for the link. I remember watching one of his videos yesterday for something, but apparently this was the one I needed! He does have another video on how to SBF back to 2.3.4, so I think I will just go for it right now.
Also yesterday it only took so long because I had to figure out what mess I had gotten myself into before I could figure out how to figure out what to do. This definitely looks like it shouldn't take more than an hour. :good:
I do have one quick question about backups. NANDroid is a full system backup, including the OS, right? And Titanium Backup is for apps and data? Therefore I should be able to restore all of my apps and data into Android 4.2.1 with Titanium, right? I at least know how to get back to 2.3.5 and restore my data if I can't restore it in 4.2.1, but I'd rather not have to go through this process again if I find out that Titanium can't restore everything.
(haha... I couldn't quote you because of the outside link and my 'xda noob' status )
Dasoccerguy said:
Thanks for the link. I remember watching one of his videos yesterday for something, but apparently this was the one I needed! He does have another video on how to SBF back to 2.3.4, so I think I will just go for it right now.
Also yesterday it only took so long because I had to figure out what mess I had gotten myself into before I could figure out how to figure out what to do. This definitely looks like it shouldn't take more than an hour. :good:
I do have one quick question about backups. NANDroid is a full system backup, including the OS, right? And Titanium Backup is for apps and data? Therefore I should be able to restore all of my apps and data into Android 4.2.1 with Titanium, right? I at least know how to get back to 2.3.5 and restore my data if I can't restore it in 4.2.1, but I'd rather not have to go through this process again if I find out that Titanium can't restore everything.
(haha... I couldn't quote you because of the outside link and my 'xda noob' status )
Click to expand...
Click to collapse
a nandroid backs up the OS as well as all apps and data, but that only helps you if you are modding/messing with that specific rom. so yes, TB is the way to go for restoring apps across roms. glad to point you in the right direction! report back once youve made the jump. :fingers-crossed:
Success!
I used Tomsgt123's tutorials and they were fantastic. First I had to install the 2.3.4 SBK and then CM10 and Gapps. I'm currently running Titanium Backup and it's working flawlessly.
I did have one hiccup earlier though. I noticed that my contacts weren't backed up, and apparently I had disabled the online contact backup also. I was hoping that I could do a NANDroid restore, backup my contacts, and then go through with the CyanogenMod installation. But, the restore kept hanging and refused to finish. I tried 3 or 4 times, and on the last try I restored by section and it was the data section that caused the hang.
So, I'll have to rebuild my contacts list a little bit, but since SMS was backed up I'll at least get the people I care about . Cyanogen is pretty sleek and so far it's been noticeably faster than Gingerbread. I was constantly getting a low framerate just navigating my mainscreen before, and that's one of the reasons I was inspired to try out Jellybean or just anything newer. I can't make any claims about battery life yet since I haven't unplugged it, but other reviews said the battery can last more than twice as long which is fantastic.
I can't thank you enough, Lorenzo, for pointing me in the right direction. :highfive:
Dasoccerguy said:
Success!
I used Tomsgt123's tutorials and they were fantastic. First I had to install the 2.3.4 SBK and then CM10 and Gapps. I'm currently running Titanium Backup and it's working flawlessly.
I did have one hiccup earlier though. I noticed that my contacts weren't backed up, and apparently I had disabled the online contact backup also. I was hoping that I could do a NANDroid restore, backup my contacts, and then go through with the CyanogenMod installation. But, the restore kept hanging and refused to finish. I tried 3 or 4 times, and on the last try I restored by section and it was the data section that caused the hang.
So, I'll have to rebuild my contacts list a little bit, but since SMS was backed up I'll at least get the people I care about . Cyanogen is pretty sleek and so far it's been noticeably faster than Gingerbread. I was constantly getting a low framerate just navigating my mainscreen before, and that's one of the reasons I was inspired to try out Jellybean or just anything newer. I can't make any claims about battery life yet since I haven't unplugged it, but other reviews said the battery can last more than twice as long which is fantastic.
I can't thank you enough, Lorenzo, for pointing me in the right direction. :highfive:
Click to expand...
Click to collapse
thats awesome. i loved the feeling when i first flashed a new rom on this phone. glad you got it figured out. make sure to thank Tomsgt for his videos as well . hes a cool dude and put a lot of time into it.
as for battery life, its kinda a bit rough on cm10. i wouldnt say twice as good. that would be too good to be true...lol . but if you limit your apps, it shouldnt be that much worse.
one thing, to improve performance, under settings, go to developer options, and near the bottom there is background processes. its set at standard limit by default. change it to three at most. this will make a noticeable improvement in performance, but will also need to be re-set at 3 at most if you ever reboot/power off.
glad i could help! :highfive:
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
muffintastic said:
Hey y'all.
So many threads ago I posted up on how to root a SGS2 I900P, which in the end I did no problems. The ONLY problem I encounted where I'd flash a different ROM and wanted to restore back to my factory loaded Orange UK rom, which when I restored it with no problems it just went through the 'boot loop' phase. I read up that this is caused due to a faulty emmc 'bricking bug' and luckily it was only "soft bricked".
Cut the long story short I managed to re-flash the Orange (UK) carrier firmware (after many USB cable changes and port swaps and fails) via Odin and retain my previously installed apps and so on and had to re-root. Is there a method or some sort of fix for the emmc bug issue for future wipes/restores ?
Something new I learnt in all that process too,
Click to expand...
Click to collapse
To avoid brickbug is by flashing JB 4.1.2. (good alternative!)
But if you really like ICS then i suggest you move back to 4.0.3. There is no avoiding brickbug on 4.0.4.
If you have rooted it, you can check with 'Brickbug check' app on google play, to see if you have sane (or insane) chip (brickbug or not), cause most custom kernels and roms have found a solution to this bug, and use it on their roms/kernels. Which means on those you can safely wipe and restore etc.. (but check brickbug app first on google play)
Yep. Don't wipe a rooted phone running 4.0.4. And if you're really paranoid, don't even wipe a non-rooted phone running 4.0.4 (Entropy mentioned at least one case he knew of where someone borked their phone doing a wipe on a phone running 4.0.4 via stock Android recovery, tho it seems to be very rare).
The TL;DR is don't run rooted stock 4.0.4 if you mess with your phone in any way.
I know that's not a fix, but that's because there isn't one. Some chips aren't susceptible to the bug; there's an app floating around here somewhere/Google Play where you can check which chip you have (seems to be more that are susceptible).
Your 1st paragraph is a load of crap.Bootloop has nothing to do with "brickbug".More like by you not running kernel cleaning script,or not factory resetting before/after flashing a new rom.
As mentioned by others,just dont have 4.0.4 running on your phone.So you are still left with over 100 custom/stock roms to choose from........lol
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Hopper8 said:
Was the backup of JB? Or ICS? OP doesn't say. If it was JB, I'd be willing to bet that the bootloop was due to an attempt to restore the stock rom, but without restoring preload.
Sent from a galaxy far, far away
Click to expand...
Click to collapse
Im not sure Hopper.I am leaning towards the restore would be "cancelled" due to not being complete,rather than it succeeding leading to bootloop.
But hes not said.
And he cant get "factory" rom with a restore as it didnt come with cwm lol.
Sorry to clear things up.. I updated it to 4.1.2 via Kies many months ago. I used PhilZ method to root, no problem. Few months down the line since then I put LiquidSmooth 2.4 (few days ago) then restored a backup from PhilZ recovery and put 4.1.2 and everything back on no problem. Then restarted the phone and it when into a boot loop of the Orange and Samsung logo.
I'm not stupid as I've rooted my own SGS3 and Samsung Galaxy ACEs etc, Just forgotten to put that info in lol and yes I always use the Factory Reset to install a new rom.
And yes when I managed to get it restored from this so called boot loop (by putting 4.1.2 Orange UK firmeware back on via Odin) the EMMC brick bug is present as i've checked via an app via Google Play. My overall goal is to eliminate this problem or temp fix so I can put different roms on and if I don't like them recovery back to the latest restore without issues.
Are we on the same line now ?
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
help me out here please
MistahBungle said:
And as we've said, you can't eliminate the problem. You can avoid the problem by not running 4.0.4 stock roms. It's really quite simple, but like a lot of people here you're trying to make it complex when there's no need to.
Click to expand...
Click to collapse
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
andreshbozo said:
ok its a long story so i better get started... my friend had his phone rooted and installed a jelly bean version of Paranoid android and he wanted to put kitkat on it, he downloaded the cm11 latest nightly and told me to flash it i proceed to flash the phone but it failed and showed me "error status 7" so the phone couldnt get neither into the previous pa nor in the cm11... after some research and messing with the META INF stuff to sol the status 7 thing i found out that the problem was that he wasnt using a kitkat compatible recovery... i installled it and finally got to flash cm11.. that didnt came out as you may thought the phone showed it had -15246384352 % of battery made a freking glitch when the sreen rotated and it wouldnt recognize either of the sd cards (internal memory or external sd card) so i couldnt flash it again, wipe data/cache wouldnt solve the problem either... i turn into our ol friend odin and flashed stock JB wich worked perfectly except that i had the same issue with the memories... used philz to root the phone again, the try to format /system /data /emmc to check if that was the problem annnnd ta da the phone wont boot :silly: odin keeps failing to flash stock again and i dont jknow what to do....
sorry for the long post but i guess that you might need alll the info you could get for helping me...
thanks a lot
Click to expand...
Click to collapse
Here is my situation.
I had 4.1.2 JB. Installed CM11 M8 and CWM_6.0.4.7(coming previously from Siyah) at the end of July. In the beginning of October my phone just shut down. That happened before on the same and previous rom so I wasn't worried. I turned it on and phone was in bootloop. That was strange because the last time that happened I installed Chainfire. So bootloop without any cause..that was strange. I tried making a backup before flashing the ROM. But I got an error. I can't remember but I can dig it somewhere if you want it. I tried then flashing recovery(bad idea) and Odin again reported an error. When I restarted phone I noticed that my Recovery mode was gone. Just gone and with no solution on how to restore it. I tried numerous methods OMAP drivers, heimdall, .pit file method but nothing. So I brought my sgs2 to the store where I bought it and they concluded that it was bad eMMC chip.
Now, your problem reminds me of mine because Odin wouldn't want to flash anything without an error(well, not exactly anything, I managed to flash some partition using Heimdall but it was not sufficient) but it doesn't have to be.
What version of cwm were you using?