Can Anyone help me rooting usind the insecure Ics kernel....i dont know Which kernel to Flash
or suggest me any other Method..:fingers-crossed:
Info on my Phone
Model no- GT-19100
Android Version 4.0.4
Baseband Version- 19100DDLPC
Kernel Version
3.0.15-1157945
[email protected] #3
P PEEMPT fri Occt 26 16:17:36 KST
2012
Build Number
IMM76D.XWLQ2
bid4sumit said:
Can Anyone help me rooting usind the insecure Ics kernel....i dont know Which kernel to Flash
or suggest me any other Method..:fingers-crossed:
Info on my Phone
Model no- GT-19100
Android Version 4.0.4
Baseband Version- 19100DDLPC
Kernel Version
3.0.15-1157945
[email protected] #3
P PEEMPT fri Occt 26 16:17:36 KST
2012
Build Number
IMM76D.XWLQ2
Click to expand...
Click to collapse
Flash this kernel with odin and your done. (SiyahKernel)
isn't this kernel rom specific..i mean i checked a few other kernels which were basically stock kernels with superuser and busybox added..
bid4sumit said:
isn't this kernel rom specific..i mean i checked a few other kernels which were basically stock kernels with superuser and busybox added..
Click to expand...
Click to collapse
This kernel works fine with ICS roms. I use it always when i need to root a phone. With this kernel you get root and a custom recovery.
,,,,
trying hoping works well
Related
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
wyang0120 said:
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
Click to expand...
Click to collapse
use usb jig
havenoname.304 said:
use usb jig
Click to expand...
Click to collapse
usb jib cannot clear binary count on ICS
I am totally new at this but i done it like this (but you will loose rom and kernel)
Flashed mine phone to stock Android (gingerbred ver.). I used India
then over odin flashed bootloader wich clear counter
Gingerbread Bootloader : DOWNLOAD
PS
Take it easy on me if i wrote something stupid
and sorry for bad English
Go here.
wyang0120 said:
How To UnRoot And Clear Binary Count For My SGS2 G
Here Is My Phone Info
=========================
Android Version
4.0.4
==========================
Baseband version
I9100GDXLP6
==========================
Kernel Version
3.0.33-CM-g6f8e729
[email protected] #1
SMP PREEMPT
Thu Jul 1200:08:45
EDT 2012
===========================
Build Number
IMM76I_RR
============================
Resurrection version
RESURRECTION_REMIX_V11_M6-I9100G
Click to expand...
Click to collapse
First of all, pls don start a new thread coz this belongs to General Q&A thread
1. Download the stock Firmware and Kernel
Link:
http://forum.xda-developers.com/showthread.php?t=1754158
2. Download and use odin to flash it.
Link:
http://teamhacksung.org/download/samsung/GT-I9100G/Odin3-v1.85.zip
3. Once u flash it, u ll b in stock firmware n ur binary count will reset to original.
Note:
U will lose root. And I am not responsible if u brick ur device. Use it at ur own risk.
What is bootloader??how about after i'm downgraded my ics to GB 2.3.6 stock firmware without flashing bootloader,can i'm using usb jig to reset binary counter and remove yellow triangle from my gt i9100g??
Sent from my GT-I9100G using xda app-developers app
Use triangle away app from chainfire before flashing stock rom.
Sent from my GT-I9100 using xda premium
Is it work on gt i9100g??this is my only hp and i'm still love it so much..hehe..
Sent from my GT-I9100G using xda app-developers app
updated my galaxy s2 to the new ics 4.0.4
baseband 9100xxlq6
kernel 3.0.15-i9100xwlpt-cl941023 dpidell 169 #3
build imm76d.xwlpt
i lost my root how do i get it back
do i just flash CF-Root-SGS2-v5.3-CWM5.tar
done it now. it was what i said
stall20080 said:
updated my galaxy s2 to the new ics 4.0.4
baseband 9100xxlq6
kernel 3.0.15-i9100xwlpt-cl941023 dpidell 169 #3
build imm76d.xwlpt
i lost my root how do i get it back
Click to expand...
Click to collapse
here http://forum.xda-developers.com/showthread.php?t=1103399
stall20080 said:
updated my galaxy s2 to the new ics 4.0.4
baseband 9100xxlq6
kernel 3.0.15-i9100xwlpt-cl941023 dpidell 169 #3
build imm76d.xwlpt
i lost my root how do i get it back
do i just flash CF-Root-SGS2-v5.3-CWM5.tar
done it now. it was what i said
Click to expand...
Click to collapse
No need for CF-Root.. just use guide from my signature, method nr.1
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Or better mate just flash syiah kernel much better then cf + u get tunning options
Sent from my GT-I9100 using xda premium
---------- Post added at 02:06 PM ---------- Previous post was at 02:05 PM ----------
And its brig bug safe
Sent from my GT-I9100 using xda premium
Sun90 said:
thats the stock kernel ma8, if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
+1
blakeks said:
Hi,
I just upgraded my Firmware with Kiest o 4.0.4. Now I want to root my device again, but my new Kernel looks kind of strange to me. Would be nice if anymone can help me. Here are some info:
Device: GT-I9100
PDA: I9100XWLPW
PHONE: I9100XXLQ6
CSC: I9100DBTLPI
Build Info: Wed Aug 22 22:34:22 KST 2012
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT
Build Number: IMM76D.XWLPW
Click to expand...
Click to collapse
Doesn't really matter what your kernel version is. It doesn't stop you from doing anything especially when its going to be replaced with CWM or Siyah
Sent from Jelly Fuelled SGS2
Bluetooth problem
Hi,
I after upgradin my Firmware with Kiest to 4.0.4. I rooted my device again, : Sun90 replied
if u want to root ur phone then find a cf-root kernel matching LPW the last three letters of ur Build XXLPW.
Click to expand...
Click to collapse
I found chaifire CF-Root-SGS2_XX_OXA_LPW-v5.5-CWM5 and yes the phone was rooted again, But when i got in my car i could not get a bluetooth connection and when I try to enable bluetooth in the settings menu it can't no error no nothing it reverts to the off setting.
I dont know if anyone els has the same problem or if there are other problems I hav not experienced yet and they may have a sollution i haven't found yet could you be so kind as to share?
Model number: GT-I9100
Android version: 4.0.4
Baseband version: I9100XXLQ6
Kernel-Version: 3.0.15-1056084 [email protected] #3 SMP PREEMPT Original
Kernet-Version: 3.0.15-I9100XXLPW-CL413606 [email protected] #3 SMP PREEMPT Mon 30 21:54:21 KST 2012 After Root
Build Number: IMM76D.XWLPW
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
przemcio510 said:
Use Siyah kernel.
And XWLPW is NOT the same as XXLPW (!).
Click to expand...
Click to collapse
Your phone begs for Siyah
straightup100 said:
Dear sir, please would you please, please make an XWLPW INSECURE KERNEL for rooting my samsung galaxy s2. thank you very very much.
Click to expand...
Click to collapse
Use custom kernel like Siyah or Speedmod to avoid brick bug
Poroto said:
Your phone begs for Siyah
Click to expand...
Click to collapse
What?
New Siyah Version
Hi
i have found siyah version v.5.0.1 should i use it or should i use v.4.1.5 version?
Thanks..
5.0.1 supports ics or jb custom rom,i never tried it to a stock rom before,but siyah has a thread to it,you can search it for further info.
Sent from my GT-I9100 using xda premium
Okey so my Sgs2 is on android 4.0.4 I9100XXLQ6
My kernel version is:
3.0.15-1068762 [email protected] #3
SMP PREEMPT Wed Aug 29 13:40:41 KST 2012
My Build is:
IMM76D.XWLPX
My Problem is:
I can't seem to find right CF-Root for my kernel.
Could anyone give me a tip?
Or perhaps straight answer?
Hoodoe said:
Okey so my Sgs2 is on android 4.0.4 I9100XXLQ6
My kernel version is:
3.0.15-1068762 [email protected] #3
SMP PREEMPT Wed Aug 29 13:40:41 KST 2012
My Build is:
IMM76D.XWLPX
My Problem is:
I can't seem to find right CF-Root for my kernel.
Could anyone give me a tip?
Or perhaps straight answer?
Click to expand...
Click to collapse
I'll advise a custom kernel e.g Siyah, Dorimanx, Speedmod, etc (not CF-ROOT) to avoid the infamous brick bug.
Jokesy said:
I'll advise a custom kernel e.g Siyah, Dorimanx, Speedmod, etc (not CF-ROOT) to avoid the infamous brick bug.
Click to expand...
Click to collapse
I'm sorry to be such a noob with rooting stuff.
What i want to my phone is clockworkmod recovery and root.
Does all of those give me both of them
Oh, and to be exact, I want to keep it simple. So, no custom rom or anything. just the basic root rigths and CWM recovery.
Hoodoe said:
I'm sorry to be such a noob with rooting stuff.
What i want to my phone is clockworkmod recovery and root.
Does all of those give me both of them?
Click to expand...
Click to collapse
Those custom kernels will solve that.
Visit here to learn more about the brick bug: forum.xda-developers.com/showthread.php?t=1756242
Hi
I just rooted my xperia sola (.54 kernel) using Root_with_Restore_by_Bin4ry_v21 method. (Taiwan custom version)
I encountered two strange things which I cant google about it.
1. when I trying to down grade to .10 kernel using flashtool, flashtool reported that the flashing is successful. (MT27i_6.1.1.B.1.10_KERNEL, 5.21 MB (5,464,573 bytes))
After rebooting, the screen blacked out (as expected), but the build number in settings->about phone is still 6.1.1.B.1.54
Then, I Root_with_Restore_by_Bin4ry_v21, imagining that It would fail anyway.
2. After reboot, the black out disappeared, and there is Superuser waiting for me.
and the build number is still 6.1.1.B.1.54
any ideas?
dexterhuang said:
Hi
I just rooted my xperia sola (.54 kernel) using Root_with_Restore_by_Bin4ry_v21 method. (Taiwan custom version)
I encountered two strange things which I cant google about it.
1. when I trying to down grade to .10 kernel using flashtool, flashtool reported that the flashing is successful. (MT27i_6.1.1.B.1.10_KERNEL, 5.21 MB (5,464,573 bytes))
After rebooting, the screen blacked out (as expected), but the build number in settings->about phone is still 6.1.1.B.1.54
Then, I Root_with_Restore_by_Bin4ry_v21, imagining that It would fail anyway.
2. After reboot, the black out disappeared, and there is Superuser waiting for me.
and the build number is still 6.1.1.B.1.54
any ideas?
Click to expand...
Click to collapse
If you flash only the kernel your build number will remain the same of course... You can check your kernel version in "kernel version" xD. However if you flashed kernel B.1.10, flash again kernel b.54 or c.10 after root
scofield119 said:
If you flash only the kernel your build number will remain the same of course... You can check your kernel version in "kernel version" xD. However if you flashed kernel B.1.10, flash again kernel b.54 or c.10 after root
Click to expand...
Click to collapse
I got it
/data/data/berserker.android.apps.sshdroid/home # uname -a
Linux localhost 3.0.8+ #1 SMP PREEMPT Mon Sep 10 16:04:56 2012 armv7l GNU/Linux
after.54 kernel back
/data/data/berserker.android.apps.sshdroid/home # uname -a
Linux localhost 3.0.8+ #1 SMP PREEMPT Mon Oct 15 14:57:07 2012 armv7l GNU/Linux
thanks a lot!