I've recently searched high and low for a working solution to an issue I'm having with my Matrix One tablet. I'm getting an exclamation mark inside of a triangle, inside of a battery icon. The issue started after I let the battery completely die out. I can't get past that screen. When pressing power the battery icon shows up and the tablet shuts down a second later. I tried all button combinations to get into recovery, nothing worked. I've also tried charging the tablet, I've left it overnight a few times, and that hasn't helped.
There was one thing I managed to do, that was get the tablet to show up on my computer. I held down the update button with a needle and then held the power button until a blue light indicating the tablet was on showed up. The screen was black but my computer detected a new device. My computer didn't find any drivers for the tablet, so I went in search of them myself and couldn't find any. My tablet is A10 compatible, but none of the A10 drivers I found seem to work on my tablet when I go to manually update it through device manager, neither does the PDAnet method I found online.
I was able to find a recovery that works on my device, one that will allow me to reset my tablet, if I'm able to boot into recovery after I get it on my tablet. Now in order to even test the other recovery I need drivers for my device so ADB can detect it and I can push the recovery. My device is already rooted with Superuser updated to the latest build.
I'll add that I've even taken the liberty of opening up the tablet to see if I can disconnect the battery from the board to cut all power, as I've read that has helped other people, but I'm unable to do that because the batteries are connected by soldered red and black cables.
If anyone can be of assistance I'd really appreciate it, thanks in advance for any replies.
Still need some help with this... If you have any A10 drivers you can point me to I'll try them if I haven't already.
G'day guys,
Having some issues with my Tablet. I had been using it for basic web\email and had zero issues. I was playing a game (which had been played, on and off, for 3+ months) on the device when it froze.
Pressing 3 software buttons (home, back, switch) did not respond. The Volume rocker didn't adjust volume. Pressing Power didn't turn off screen. So I held down Power for 3 seconds. Nothing. Held it down for 5 seconds. Nothing! ... Held it down for 10 seconds and it switched off.
I left it for 2-3 minutes and then turned the tablet on. Just gets stuck on the Sony animated boot screen. Nothing more!
OS 3.0 upgraded to OS 4.0.3 direct from built-in Sony upgrade. Zero issues for months until now.
Stock ROM. Not rooted.
I was hoping to get the data off the internal storage however if it is not possible... then maybe I just need to move on and start fresh! :\
I have a suspicion there is a corruption with something like /cache or something else really simple.
Would be great if anyone is aware of a simple fix without losing data, or a full-proof way to resolve it by doing anything..... Just need a reliable solution...
HELLLLLP!
THANK YOU!
NOTE: I can bypass the boot animation and access the recovery interface.
Cheers guys!
Following the instructions here a few days ago http://www.howtogeek.com/125375/how...kup-without-rooting-or-unlocking-your-device/ (http://developer.android.com/tools/sdk/tools-notes.html and http://developer.android.com/sdk/index.html#win-bundle) I downloaded and installed the bundle as per instructions.
When Sony Tablet S is connected, nothing is displayed. Although, granted, it took a lot of fiddling to get the Samsung to show up (damn USB / Sync / xxx modes for USB connectivity.
Code:
C:\Users\Flip\AppData\Local\Android\android-sdk\platform-tools>adb devices
List of devices attached
My Samsung, which I plan to backup and then root via KingRoot:
Code:
C:\Users\Flip\AppData\Local\Android\android-sdk\platform-tools>adb devices
List of devices attached
304xxxxxxxxxx4AE device
hello, good day android wizards, a noobie here and i decided to post here because i cant find any similar device and its symptoms. i am using myphone agua rio fun jellybean version and i rooted it but yesterday i deleted the backup file thanks to my hidden moronic abilities now i am seriously regretting it i keep pressing the power button until the bone on my thumb dislocates and nothing shows. i also tried to press powerbutton+volumeup+volumedown a message shows recovery mode and factory mode and when i choose any of those 2 options the device will shut down for no reason. and when it is connected to laptop it will show the battery screen for about 18 secs and disappears and after 10 secs the myphone logo appears, its like they are alternating everytime and on my laptop i will hear a notification sound that the usb is inserted when the screen lights up and another notification sound for removed usb when the screen turns off even it is plugged in to my laptop for a long time again and again and again. i tried to format the sd card hoping something might happen but nothing changed.
can someone help me fix this problem or does someone has the same problem with mine? i am kindly sincerely asking for any help to solve this. please lend me your wisdom
I checked all the other threads on this and they don't seem to apply. I have an xperia s tablet that I really like. It was becoming slow so I finally decided it was time to root. Thanks Condi for the motochopper. I got it rooted successfully but then it was running too slow to be useable. I found a program to run that was supposed to rearrange the memory the way you defrag a computer drive. After running that the tablet would only turn on to the Sony logo. I did a factory reset a couple of times and now I can not turn on at all. I get the green charge light and I can get the red single blink when I do a reset but then when I press the power button I get the white light comes on and goes right back off. I tried with the up vol, down vol and no other keys but nothing. I have tried plugging into the computer and sometimes it sees a malfunctioning USB device and sometimes it sees nothing. I have run the xperia unbricker I found on here and it says waiting for device. I tried plugging it in with that program running but no luck. The only other post I found that was related the user said it was a motherboard failure. I'm not ready for that yet. Any ideas out there? Thanks in advance.
I got a cheap Fusion5_108 tab off ebay working but with a cracked "screen"
i've ordered a new digitizer... atm it's totally unresponding to touch, but will work with a mouse / keyboard in the usb A socket on the tab.
So i was playing with it, i plan to use it for one specific task... part of a train driving control desk, the tablets will be the displays found in German trains... i.e. the 'MFA' thats speedo gauges and lights on one tab, electronic timetable on another tablet, the engine dignostic data on another tab, brake pressure gauges on another etc... i already have a lenovo A6700-f that i replaced the digitizer on and did the same things to, and it still works fine.
I loaded the 'TS_MFD' app that works with the train sim via tcp, got it all working fine.
Then i decided i didnt like the google search bar along the top of the home screen, and found out online that by disabeling google services app, it'd get rid of it... so i did that, the search bar went.. but left a shadow box where it used to be... so i thought i'd reboot the tablet and see if that got rid of it.
Held power button in till i got the shutdown / re-boot options, chose re-boot.
Aaaannnd... now it's stuck in a boot loop. all it does it begin to start up... the Fusion5 logo comes up, then it goes "android is starting" 'optimizing apps, 1, 2, 3 of 3...'
Then black screen with android in middle, and that screen goes brighter and dimmer... then eventually it'll reset, and show the "android is starting, optimizing apps' thing over and over.... once it froze on the optimizing apps screen, the circle that goes round froze. but usually it's just loops... left it overnight and still doing it this monring.
If i shut it down by holding power for 10 seconds or so, and hold any volume button and power, it'll start the recovery thing... BUT all i get is the dead android and "No Command'
And no combinations of pressing the power and volume buttons will do anymore... even tried with a mouse and a keyboard... best i could get is a re-boot pressing CTRL - ALT - DELETE on the keyboard.
There seems no way to get this thing to show the recovery options... when i did this on the lenovo tab, it went straight to the 'select option with volume buttons' thing i'm expecting.
Obviousely there's no wany to get this tablet into USB debugging mode, trying the thing where you hold volume button, plug usb cable in, press power 10 times, it sometimes shows up as a usb media devise, sometimes a NDIS internet sharing devise. but they go when it boot loops.
I even tried de-soldering the battery and leaving it for 20 minutes, but upon re-soldering the battery onto the mainboard, it does the same boot loop thing.
I've read i could use Phoenix card writer to make an SD card with the firmware on it, and start the tablet up with that sd card in the slot and it'll load from it.... but where do i find the firmware? the allwinner site doesnt seem to have a firmware... that i can find for the A83T processors.
This is all i know about this devise:
Allwinner
Fusion5_108
1.0
002001014108aa62de01
A83t processor (confirmed by looking inside it)
not mine.. but same model:
ro.product.firmware=v6.0rc4_20161114
ro.fota.version=Fusion5_108_16_OS60_UK_20170310_V2F
ro.inet.model.name=N1061L14BC
Any suggestions?
Got it fixed,
Been emailing the fusion5 people, started that via their store... just google fusion5 store.
And they spend a while figuring out which tablet i have, sent an .img file... first one was for the wrong devise..... never than the one i have... but the 2nd try they got me the right firmware,
Loaded it to a micro SD card using phoenic card, popped the sd card in the tablet, started it up and it loaded the firmware, took the sd card out, and it rebooted and started up fine,
Only thing is it's android 5, and the tablet used to be running android 6... so now i'm looking at how to upgrade to marshmallow, as there are some apps i used that wont run on older than android 6.
Rom needed
Hi mate, do you mind sharing the ROM for the fusion5 108 ?
Thanks
re: Fusion5 Rom
Hi there. I know this thread is a couple of years old, but I haven't been able to find the ROM for this tablet anywhere else, so I wanted to see if you (or anyone reading this) wouldn't mind sharing it. Thanks!
Buying copy of img file
Gazz said:
Got it fixed,
Been emailing the fusion5 people, started that via their store... just google fusion5 store.
And they spend a while figuring out which tablet i have, sent an .img file... first one was for the wrong devise..... never than the one i have... but the 2nd try they got me the right firmware,
Loaded it to a micro SD card using phoenic card, popped the sd card in the tablet, started it up and it loaded the firmware, took the sd card out, and it rebooted and started up fine,
Only thing is it's android 5, and the tablet used to be running android 6... so now i'm looking at how to upgrade to marshmallow, as there are some apps i used that wont run on older than android 6.
Click to expand...
Click to collapse
Hi any chance of buying a copy of the img file. My tablet has just gone to 'No Command' screen and I cannot get it to load.
Thanks.
Andy
---------- Post added at 06:23 PM ---------- Previous post was at 06:18 PM ----------
AndrewRobert said:
Hi any chance of buying a copy of the img file. My tablet has just gone to 'No Command' screen and I cannot get it to load.
Thanks.
Andy
Click to expand...
Click to collapse
The company say the tablet is obsolete and it will not support it any longer
Andy