[Q] Fash CM10 on TF201 issues - Asus Eee Pad Transformer Prime

Hello everyone,
I've got a TF201 that's rooted, unlocked with TWRP 2.2.2.1 recovery. The past couple of nights I've been trying to load CM10 on it with the nightly releases. I've tried a few different ones but they all give me the same result.
Here is what I do:
Boot to recovery
Do Nandroid backup (just to be safe)
Perform factory rest
Wipe Cache & Dalvik Cache
Install CM10(in this last attempt it was cm-10-20130324-NIGHTLY-tf201)
Install gapps (gapps-jb-20120111-signed)
Reboot.
When it reboots, it just gets stuck at the ASUS splash screen and never goes further. I'm able to power off, reboot into recover and load the Nandroid backup and get back to the stock rom, but I'd really like to use CM10 on this device. As a side note, I'm currently on the latest stock ROM.
Has anyone else seen this or does anyone have any suggestions for me?
Thank you!

agr8lemon said:
Hello everyone,
I've got a TF201 that's rooted, unlocked with TWRP 2.2.2.1 recovery. The past couple of nights I've been trying to load CM10 on it with the nightly releases. I've tried a few different ones but they all give me the same result.
Here is what I do:
Boot to recovery
Do Nandroid backup (just to be safe)
Perform factory rest
Wipe Cache & Dalvik Cache
Install CM10(in this last attempt it was cm-10-20130324-NIGHTLY-tf201)
Install gapps (gapps-jb-20120111-signed)
Reboot.
When it reboots, it just gets stuck at the ASUS splash screen and never goes further. I'm able to power off, reboot into recover and load the Nandroid backup and get back to the stock rom, but I'd really like to use CM10 on this device. As a side note, I'm currently on the latest stock ROM.
Has anyone else seen this or does anyone have any suggestions for me?
Thank you!
Click to expand...
Click to collapse
Likewise. The 0322 posted in the dev forum works for me. I get the same issue when I try to update to 0324 and apparently this is happening for other devices too.

clockwork58 said:
Likewise. The 0322 posted in the dev forum works for me. I get the same issue when I try to update to 0324 and apparently this is happening for other devices too.
Click to expand...
Click to collapse
Great to know it's not just me with PEBKAC error or something.
I'm not able to find the 0324 nightly, would you happen to have a link?
Thank you for your reply and help!

I got it from Settings -> About Tablet -> Updates and select "All avail updates"
I'm all new to CM10

clockwork58 said:
I got it from Settings -> About Tablet -> Updates and select "All avail updates"
I'm all new to CM10
Click to expand...
Click to collapse
Sadly that only works if you already have CM10 installed. I'm still on the stock ASUS rom.

agr8lemon said:
Sadly that only works if you already have CM10 installed. I'm still on the stock ASUS rom.
Click to expand...
Click to collapse
get the 0322 build and gapps here:
http://forum.xda-developers.com/showthread.php?t=2053269

clockwork58 said:
get the 0322 build and gapps here:
http://forum.xda-developers.com/showthread.php?t=2053269
Click to expand...
Click to collapse
Yay! That one worked and I'm up and running on CM 10.1
Thank you!

Related

[Q] touchpad stuck in bootloop on CM boot after instal alpha 3.5!

i tried installing CM7 alpha 3.5. first install went okay fully. went to reboot and boot up and after i clkick cyanogenmod in the dual boot loader, it will display cyanogen icon and load for about 8 - 10 seconds then restart. keeps going in that order. tried erase/wipe all, dalvik, cache, etc... i am not sure what hapopened. does anyone have any ideas for me?
thanks in advance!
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Bear gri11z said:
Bad zip?
Are you coming from a earlier version of cm7?
Or is it a first time flash for the touchpad?
Click to expand...
Click to collapse
coming from alpha 3. not first time flashing. havent had problems before. tried redownloading the zip 2x
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
bensdeals said:
i had the same issue with miui. took me a day to figure it out, as there are few posts on this. you must "wipe sd" in cm recovery before installing the rom. do a backup first. it doesnt touch the webos area.
-ben
Click to expand...
Click to collapse
tried to do clockwork recovery. finished backing up boot, then went to back up system and restarted.
how do you wipe sd? do you mean partition it?
A sort of solution
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
KJSOARES2 said:
I upgraded from 3 to 3.5 as well and I got in to a bootloop as well do I downgrade then re-upgrade or what, any help would be great.
EDIT: After posting this I reinstalled 3.5 and it's working but i'm never going to turn off android again at least until ICS
Click to expand...
Click to collapse
did you perform any other steps? you just installed 3.5? nothing special?
edit: i tried reinstalling 3.5. i tried redownloading it ot make sure it wasnt corrupt. nothing happened. it reboots during the installing system partition.
I wiped the cache and dalvik other than that I did nothing special, then I just re-installed it and it's working so far.

[Q] TWRP 2.4.4.x Boot Loop?

Has anyone else had a boot loop problem with the new V of TWRP?? I'm running SOAv3 ROM and had ZERO problems, upgraded my twrp and had about a dozen restarts and freezes and then when I tried to boot into recovery, it boot looped. Fixed it with ODIN, then tried installing it fresh, and got the same thing. Went back to my older version and things are fine once again just wondered if this is isolated or just a known bug??
Yes its a know issue right now go back to the previous working version of twrp and wait for it to get fixed.Also be sure to check big Biff's twrp page before trying to update again to make sure everything is good.
Sent from my SGH-I717 using xda premium
Just update from Padawan V8 to SOA build 3. Was skeptical for a day or so but finally did it last night. Was just about to update to the New TWRP, thank fully I read through all those pages before I did, I usually don't. Saved me a head ache except I forgot to wipe cache's before installing the GAPPS, going to have to re-do that I believe to get the new camera functions from what I've read.
Demmonnixx said:
Just update from Padawan V8 to SOA build 3. Was skeptical for a day or so but finally did it last night. Was just about to update to the New TWRP, thank fully I read through all those pages before I did, I usually don't. Saved me a head ache except I forgot to wipe cache's before installing the GAPPS, going to have to re-do that I believe to get the new camera functions from what I've read.
Click to expand...
Click to collapse
you are correct Sir.....wipe caches and re-flash gapps.....g
psycoartwork said:
Has anyone else had a boot loop problem with the new V of TWRP?? I'm running SOAv3 ROM and had ZERO problems, upgraded my twrp and had about a dozen restarts and freezes and then when I tried to boot into recovery, it boot looped. Fixed it with ODIN, then tried installing it fresh, and got the same thing. Went back to my older version and things are fine once again just wondered if this is isolated or just a known bug??
Click to expand...
Click to collapse
How did you fix with odin? I can't get mine into the download mode to connect to odin. it just keeps boot looping?
whitebrw said:
How did you fix with odin? I can't get mine into the download mode to connect to odin. it just keeps boot looping?
Click to expand...
Click to collapse
Hold volume down and power ...it will go into download mode
Sent from my SGH-I717 using xda app-developers app
thanks but no thanks, when i do that it does the same thing as any other way of starting, just loops.
check out my post if you want.
http://forum.xda-developers.com/showthread.php?t=2202663

Stuck in a loop with CM

I've been running 10.1.2, but this morning was notified of update. So I installed the update.
However, the update killed my Wi-Fi, in that I was getting signal, but no internet connection.
So I tried to roll back to 10.1.2, but now have the constant CyanogenMod loading animation and it's been like it for an hour. So I held down the power and volume button and it does exactly the same thing, reboots and get's stuck with the animation?
I can't turn if off or anything?
Can someone please help?
WannabeMKII said:
I've been running 10.1.2, but this morning was notified of update. So I installed the update.
However, the update killed my Wi-Fi, in that I was getting signal, but no internet connection.
So I tried to roll back to 10.1.2, but now have the constant CyanogenMod loading animaition and it's been like it for an hour. So I held down the power and volume button and it does exactly the same thing, reboots and get's stuck with the animation?
I can't turn if off or anything?
Can someone please help?
Click to expand...
Click to collapse
Have had similar problems would love a dev input here,think it has something to do with having to separately flashing a compatible kernel? Or a bug in cm recovery when whipe? Anyways flash meow kernel and ROM, then in twmp recovery wipe all under advanced, then reinstall cm, that should fix it for you.
cantenna said:
Have had similar problems would love a dev input here,think it has something to do with having to separately flashing a compatible kernel? Or a bug in cm recovery when whipe?
Click to expand...
Click to collapse
Frustrating, whatever it is...
cantenna said:
Anyways flash meow kernel and ROM, then in twmp recovery wipe all under advanced, then reinstall cm, that should fix it for you.
Click to expand...
Click to collapse
Sorry, but how do I do that?
Can anyone assist please, as I'm pretty stuck at the moment. Thanks.
WannabeMKII said:
Can anyone assist please, as I'm pretty stuck at the moment. Thanks.
Click to expand...
Click to collapse
Download cm-10.2-20131029-UNOFFICIAL-pollux_windy.zip from here
http://www.windowsxlive.net/xperia-ztablet-z-cyanogenmod-10-2-fidelity-edition-build-20131029/
wipe factory reset in cwm recovery and install rom
once booted into new rom reset into twmp recovery
wipe and advanced wipe all check boxes except last and iinstall cm rom
should boot now. let me know if it works for you. Did for me.
also see
http://forum.xda-developers.com/showthread.php?t=2383800
also side note, i upgraded to sony stock 4.2.2 befire goingbto custom
Perfect. I managed to get into CWM, cleared all the old data and re-installed 10.1 that was still on the SD card. I then installed Gapps and updated CM, but not to the latest this time!
Thanks for the help, I can relax now and the Mrs can now go on Facebook again
WannabeMKII said:
Perfect. I managed to get into CWM, cleared all the old data and re-installed 10.1 that was still on the SD card. I then installed Gapps and updated CM, but not to the latest this time!
Thanks for the help, I can relax now and the Mrs can now go on Facebook again
Click to expand...
Click to collapse
Anytime, happy wife, happy life!
cantenna said:
Anytime, happy wife, happy life!
Click to expand...
Click to collapse
Lol, so true! :laugh:

[Q] Beanstalk Rom 4.4.275 Lots of Random Reboots

I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
maybe try this
SockmanTGR said:
I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
Click to expand...
Click to collapse
Try Doing a Full Wipe of Your Android System.
Use [TWRP_Recovery_2.7.0.0][Unofficial][quincyatt] Go into factory Wipe > Then Click Advance > Then Wipe Everything but your SD card .
Flash Beanstalk > then Wipe Cache and dalvik > then install PA Gapps > then Wipe Cache & Dalvik again then reboot, Also try installing > Polluti0n's Rom Patch!!
It worked wonders for me , Use Uber kernal & Set Govener to Whetle.
Happy Flashing , Any more Questions Please ask
Joshua Mr PC Repair said:
Try Doing a Full Wipe of Your Android System.
Use [TWRP_Recovery_2.7.0.0][Unofficial][quincyatt] Go into factory Wipe > Then Click Advance > Then Wipe Everything but your SD card .
Flash Beanstalk > then Wipe Cache and dalvik > then install PA Gapps > then Wipe Cache & Dalvik again then reboot, Also try installing > Polluti0n's Rom Patch!!
It worked wonders for me , Use Uber kernal & Set Govener to Whetle.
Happy Flashing , Any more Questions Please ask
Click to expand...
Click to collapse
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
I just Tried it again .
Had No Issues ,
Can You Try with a new SD Card .
Then Do The Wipe
also load TWRP Via Recovery , If You have CWM Go to Install Click > TWRP .
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
Have you vot the right TWRP? One wont work on KK
If you are getting a status 7, your recovery needs updating.
Are you formatting your system?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Put on SD Card and install
captemo said:
Have you vot the right TWRP? One wont work on KK
If you are getting a status 7, your recovery needs updating.
Are you formatting your system?
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
This is the one that works for KK
[TWRP_Recovery_2.7.0.0][Unofficial][quincyatt]
Alright i managed to fix the damage but i'm back to beanstalk with cwm. (i had to go through cyanogenmod and put it on using rom manager)
I'm still getting the bugs though(as far as I can tell. I've had one reboot already)
CWM is now functioning normally.
You mentioned a kernel? How would I go about that? I'm still relatively new to rooted devices. So please provide a detailed step-by-step information if you can.
SockmanTGR said:
Alright i managed to fix the damage but i'm back to beanstalk with cwm. (i had to go through cyanogenmod and put it on using rom manager)
I'm still getting the bugs though(as far as I can tell. I've had one reboot already)
CWM is now functioning normally.
You mentioned a kernel? How would I go about that? I'm still relatively new to rooted devices.
Click to expand...
Click to collapse
you can go to the Original Development thread and find the thread for the Uber kernel. pay attention cause one is for JB and the other for KK. whichever Beanstalk your running get the right kernel.
you will flash it just like you flash a rom, or more like you would flash the gapps. you don't have to start over flashing rom again, you are just flashing the kernel to it.
the reboots sound a bit off to me as if you are flashing completely clean, KK is very stable for me and most others. maybe try flashing rom twice as you can get 2 different reactions on 2 different flashes.
flash rom
flash rom again
gapps
boot and wait
reboot
go back and flash your kernel
make sure you get all your wipes in middle of all this.
25625292 7345
captemo said:
you can go to the Original Development thread and find the thread for the Uber kernel. pay attention cause one is for JB and the other for KK. whichever Beanstalk your running get the right kernel.
you will flash it just like you flash a rom, or more like you would flash the gapps. you don't have to start over flashing rom again, you are just flashing the kernel to it.
the reboots sound a bit off to me as if you are flashing completely clean, KK is very stable for me and most others. maybe try flashing rom twice as you can get 2 different reactions on 2 different flashes.
flash rom
flash rom again
gapps
boot and wait
reboot
go back and flash your kernel
make sure you get all your wipes in middle of all this.
Click to expand...
Click to collapse
I followed your instruction with the kernel(http://forum.xda-developers.com/showthread.php?t=2326786) Had to download it directly to my phone. It didn't like it from my laptop.
Successfully installed.
I'll let you guys know if my problem continues,
SockmanTGR said:
I flashed twrp with odin and now I can't flash most roms. (I managed to get an old cyanogenmod 10.1 to work). Not even my backup of my stock will work. I tried switching back to cwm but I get the same problems. sometimes it say they are invalid sometimes it say they aren't for my device(These are all roms I've flashed before). I've even tried new roms. Please Help Quickly!
Click to expand...
Click to collapse
You are not using twrp from the thread linked. Also do NOT use the twrp app for the recovery as my recovery is not found there. It can only be found in my thread. Flash it in recovery & you're good to go.
SockmanTGR said:
I'm using Beanstalk on my phone and I get a lot of random reboots. Mostly when I'm unlocking the phone. I press the button and the soft keys light up the phone freezes and 5 or so seconds later it reboots. It also happens during calls sometimes when I take the phone away from my face and the screen turns on and sometimes when I'm listening to music. It's also happened a few times while I was using the phone. I don't restore any data(unless you count the apps that automatically reinstall from the playstore when I boot the phone, and a few apks from blackmart) I've tried reflashing but that was only a temporary fix. I always have problems with roms being really buggy even though I always to clean flashes.
Can someone help me to fix this? I use this device to play music over a sound system for crowds of people so I really need this bug fixed. (preferably without reflashing but I will if need be.)
Click to expand...
Click to collapse
i had the same problem and went to liquid smooth and is stable
jemsTV said:
i had the same problem and went to liquid smooth and is stable
Click to expand...
Click to collapse
If you like beanstalk try this fix. New problem I'm getting a lot of graphical bugs now. So far just in browser but everything flickers including system ui
SockmanTGR said:
If you like beanstalk try this fix. New problem I'm getting a lot of graphical bugs now. So far just in browser but everything flickers including system ui
Click to expand...
Click to collapse
If you are using Beanstalk you should probably read the BeanStalk thread, both of these common problems (screen flicker and failure to wake) are solved with a Aroma package made by p0llution. You flash it in recovery and all is good. Link is in 1st post, right next to ROM link. You can also switch kernels and boot animations with same package.
delawaredrew said:
If you are using Beanstalk you should probably read the BeanStalk thread, both of these common problems (screen flicker and failure to wake) are solved with a Aroma package made by p0llution. You flash it in recovery and all is good. Link is in 1st post, right next to ROM link. You can also switch kernels and boot animations with same package.
Click to expand...
Click to collapse
Would I need to reflash the ROM to ally another kernel?
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
As instructed, you need to do some reading. In my last post I gave you instructions on how to add kernel.
Help yourself first, then others will be more than happy to assist.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
I'll give you some slack 'cause I am still close enough to my first flash that I remember being full of questions, but at least read the OP and most recent pages in your ROM thread. You should skim through it all ideally but some are 100+ pages so....
Kernel switching in general does not require any ROM action, there are likely cases that it might be useful but I've never had a problem. You will need to ensure that the kernel is matched to your ROM; KitKat or Jellybean or whatever. I usually do it as I flash a ROM but I have gone back and installed a kernel on a running ROM plenty of times; Uber for instance was released after I had BeanStalk up and running, it is a good kernel so I switched to that.
As a more general point the Note is hard to brick, as long as you don't somehow mess up the recovery (CWM or TWRP) you are just a quick restore away from back to normal. Use the backup function in your recovery, it is your friend and savior. Keep a copy of the back-up on your PC (or Mac) and you will usually be golden.
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
If you are on BS Rom you should know that all you need to to know is on the OP post-the rom and the patch. The latter contains about 5 different kernels which you can switch betw. to your hearts content. The patch is n00bie proof to make your switches. Really hit BS OP.
SockmanTGR said:
Would I need to reflash the ROM to ally another kernel?
Click to expand...
Click to collapse
Just like all the other kind gents adv'd, it's all in patch's OP:
http://forum.xda-developers.com/showthread.php?t=2535857
Including polluti0n's patches thread:
http://forum.xda-developers.com/showpost.php?p=50529734&postcount=854
He uses aroma installer, so when you flash it (personally, I did it with CWM) you don't need to wipe cache/dalvik nor wipe phone, he mentons this on patch's thread while answering questions I believe. The screenshots show you some differences between the kernels he has available, either CM, Uber or PAC.
Personally, I'm using PAC since for me it seemed to work better with the Xposed's Netflix workaround, whereas it didn't work that well with Uber.
Also, the patch provides fixes, for camera, screen flicker and such.. Give it a try, and you'll definitely love your phone more!

[Q] CM11 HW Reset?

I am currently rooted with TRWP recovery installed and have been testing out the CM11 Beta for the Sprint LG G3. I have experienced this HW reset twice, which was when i first installed this ROM it had trouble going through the setup process. I ended up going back to my recovery to try a reinstall which worked until tonight. There was an update for a few apps that i had installed from the play store and decided to allow them to update. The phone froze which led to the HW reset screen and gave me the option to either enter DL mode or simply reboot. I chose the reboot option to get it to my custom recovery so that no more havoc can be caused. What should i do to stop this HW reset from occurring? Any help would be greatly appreciated. Please note that i would like to continue using CM11 as my daily. Thanks.
WoodenDiamond71 said:
I am currently rooted with TRWP recovery installed and have been testing out the CM11 Beta for the Sprint LG G3. I have experienced this HW reset twice, which was when i first installed this ROM it had trouble going through the setup process. I ended up going back to my recovery to try a reinstall which worked until tonight. There was an update for a few apps that i had installed from the play store and decided to allow them to update. The phone froze which led to the HW reset screen and gave me the option to either enter DL mode or simply reboot. I chose the reboot option to get it to my custom recovery so that no more havoc can be caused. What should i do to stop this HW reset from occurring? Any help would be greatly appreciated. Please note that i would like to continue using CM11 as my daily. Thanks.
Click to expand...
Click to collapse
Since you are already in recovery, why don't you try recovering a stock backup and then clean-flashing one of the older builds instead of the same one that was giving you problems?
R2DeeTard said:
Since you are already in recovery, why don't you try recovering a stock backup and then clean-flashing one of the older builds instead of the same one that was giving you problems?
Click to expand...
Click to collapse
I have tried that already but i cant seem to find my backup. I have even renamed it to "Stock Backup" but no luck. Is there another way to return to stock rooted?
R2DeeTard said:
Since you are already in recovery, why don't you try recovering a stock backup and then clean-flashing one of the older builds instead of the same one that was giving you problems?
Click to expand...
Click to collapse
NEVERMIND! I found the stock back up. Derp...wrong SDCARD.....Derp lol
Have you tested CM12 by any chance?
WoodenDiamond71 said:
NEVERMIND! I found the stock back up. Derp...wrong SDCARD.....Derp lol
Have you tested CM12 by any chance?
Click to expand...
Click to collapse
I am running it right now. It still has its issues, but it does what I need it to do.
R2DeeTard said:
I am running it right now. It still has its issues, but it does what I need it to do.
Click to expand...
Click to collapse
Might give that one a try. Thanks for your help!

Categories

Resources