Ptmr3 ~ Evil1art ~ Djintrigue808 ~ Lantek23 ~ Akapaul26 ~ AddisG ~ Apen83 ~ Sbreen94
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sources -->> https://github.com/SonsOfAndroid
SOAPKernel This Kernel Should Be Compatible with most of the newer AOSP based JB ROMS for this device {7105}-- (Not TW/Samsung Base)
READ, READ, READ before downloading, flashing, or posting questions
Not all phones are created equal meaning some phones will not handle Overclocking or Undervolting as well as others.
Features
Kernel Version 3.0.76
OC to 1920
Advanced Power Emulation
Added Governors=
-Lazy
-Lulzactive
-Hotplug
-Adaptive
Added Shedulers=
-bfq
-sio
-vr
-zen
Default Scheduler= Cfq
Default Governor= Pegasusq
Default boot set to 1600
Ramdisk Mods to support Custom Boot Animations
Voodoo Sound Support
Touchwake
Github
In my GITHUB you can find my sources and code changes
Credits
Samsung for Official Source Code
Andreilux
Faux123
Cmenard
Simone 201
Gregkh
Sarcastillo
Cyanogen
Kejar
DerTeufel
Ezekeel
Instructions
TWRP Recovery HIGHLY Recommended!
-Download Kernel
-Nandroid
-Flash Kernel
-Boot system and DO NOT TOUCH FOR 2-3 MIN
Changelog
Code:
5|13
- 3.0.76
- Touchwake
3|28
- 3.0.70
- Complete Rebuild
- New Mali/Ump
3|20
- 3.0.69
- Frequency Scaling For Performance Control
-Etc
3|11
Initial Release
HTML:
Note To Donators!
Every donation is more than appreciated! To show my appreciation for my
supporters, I will now begin listing every Donator in the OP as a special
thank you.
THANK YOU
Special Thanks To The Following Supporters Of This Kernel
Downloads
SOAPKernel_6 -- http://d-h.st/KZR
Control TouchWake with TricksterMod ( Turn on and set to '0')
Support this Development By clicking this Button,,, Thank you
Guide to Thread Participation":
Generally speaking, we are a pretty calm group of people, but as with so many other things in life, there are those that evoke a negative response from the very start. THAT is why we are such believers in maintaining a polite, respectful thread. Most everyone here is eager to help, and the only thing we ask is (despite the associated tedium) read the entire thread, it can only help. If and when you are still stuck, feel free to ask questions, we're all here to help one another.
--TMobTim
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
mine
Trying it out now.
Kernel appears to work fine. I have been running it at 1812, no problems that I have run across. I use CM 10.1's performance setting to change speed and governor. CM 10.1 appears to reset itself to max 1600 after each boot the best I can tell despite the set on boot setting. Not a big deal though.
Does Advanced Power Emulation allow us to change the charging settings? If so, how?
Could this be used with the EU N7100?
The kernel is working fine with RootBox rom now. I used it almost 2 days, very stable with 1910Mhz CPU speed. Thanks ptmr3. Please keep update continuously. I like this kernel.
USB fast charging support?
Download link not find any file...
---------- Post added at 12:36 PM ---------- Previous post was at 12:04 PM ----------
Could someone provide a link this kernel??
link is dead
gismo706 said:
Download link not find any file...
---------- Post added at 12:36 PM ---------- Previous post was at 12:04 PM ----------
Could someone provide a link this kernel??
Click to expand...
Click to collapse
Try page 11 of the AT&T thread
http://forum.xda-developers.com/showthread.php?t=2186037&page=11
updated!
ptmr3 said:
updated!
Click to expand...
Click to collapse
Nice, I just put it on my phone and its working awesome. Currently on xylon, just waiting for an updated SOA build.
Sent from my GT-N7105 using xda app-developers app
So I presume this works on Paranoid Android? that's considered Aosp right?
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
So I presume this works on Paranoid Android? that's considered Aosp right?
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Yes, the topic is AOSP, but where do u found PA to our note n7105?
baxee said:
Yes, the topic is AOSP, but where do u found PA to our note n7105?
Click to expand...
Click to collapse
Erm I googled Paranoid Android Galaxy note 2 N7105, even though the thread is down in xda cuz the developer left xda.
This is the link http://www.android.gs/update-galaxy-note-2-lte-paranoidandroid-jelly-bean-4-2-2/
it's the unofficial one, you can follow the steps and in step 1 it will ask you to download the Rom file from a site, choose Paranoid Android and I chose the version.3.15, because 3.16 was a little buggy for me
So far so good, pretty smooth remember to
1. make a Nandroid backup,
2. wipe data, cache, dalvik,
3. Flash PA Rom,
4. Flash PA gapps
5. Wipe cache and dalvik
6. Reboot, wait and enjoy
Hit thanks if I helped
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
Erm I googled Paranoid Android Galaxy note 2 N7105, even though the thread is down in xda cuz the developer left xda.
This is the link http://www.android.gs/update-galaxy-note-2-lte-paranoidandroid-jelly-bean-4-2-2/
it's the unofficial one, you can follow the steps and in step 1 it will ask you to download the Rom file from a site, choose Paranoid Android and I chose the version.3.15, because 3.16 was a little buggy for me
So far so good, pretty smooth remember to
1. make a Nandroid backup,
2. wipe data, cache, dalvik,
3. Flash PA Rom,
4. Flash PA gapps
5. Wipe cache and dalvik
6. Reboot, wait and enjoy
Hit thanks if I helped
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Thank you, but why did he left xda?
baxee said:
Thank you, but why did he left xda?
Click to expand...
Click to collapse
No idea D: but really hope some other developer will continue his work!
Sent from my GT-N7105 using xda app-developers app
Frostyeo said:
No idea D: but really hope some other developer will continue his work!
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
He's continuing the work himself over at the rootwiki forums http://rootzwiki.com/topic/40116-42...y-rom-on-android-capable-of-hybrid-mode-0430/
baileyjr said:
He's continuing the work himself over at the rootwiki forums http://rootzwiki.com/topic/40116-42...y-rom-on-android-capable-of-hybrid-mode-0430/
Click to expand...
Click to collapse
Does that work to our lte? Its AT&T thread
Skickat från min GT-N7105 via Tapatalk 2
baxee said:
Does that work to our lte? Its AT&T thread
Skickat från min GT-N7105 via Tapatalk 2
Click to expand...
Click to collapse
Yes it does mate. Running the latest "Play Build" with basic halo support now. See page 12 of the thread for the download link.
The AT&T and N7105 builds have always been identical.
Related
Hi all.
r81 is the last release for Android 5.0.
r82 or newer is only for Android 5.1 - don't flash them on older Android versions.
Download:
boot image:
http://kernels.franco-lnx.net/Nexus7/5.1/
zips:
http://kernels.franco-lnx.net/Nexus7/5.1/zips
Installation:
fastboot flash boot boot_name_img
or
flash the .zip in the recovery
Changelog:
http://kernels.franco-lnx.net/Nexus7/5.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/Grouper-3.1.10
Official app support:
https://play.google.com/store/apps/details?id=com.franco.kernel.free
Got any questions that you couldn't find after searching?
FAQ: http://forum.xda-developers.com/showthread.php?t=2532422
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Fsync toggle:
It's disabled by default. Enabled = stock IO speed while having data integrity; disabled = more IO throughput but less data integrity
echo Y > /sys/module/sync/parameters/fsync_enabled (N to disable and Y to enable)
GPU clock interface:
To check the current GPU frequency:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
To change it:
echo X > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc (change the X with your desired value. Should work up to 750Mhz at least, beyond that is pure madness)
Today is a good day
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
YUSS
850T5m said:
Today is a good day
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I've been waiting for this day for almost a month. Can't wait to see this kernel develop like the one for the GNex. I swear by Franco.
awesome !! After Faux coming to Nex7 now we can also welcome Franco !! this will be a great tablet !!!
I shat my pants when I saw your name over here, finally on the 7.
Sent from my paranoid Nexus 7
welcome francisco
sway40 said:
I shat my pants
Click to expand...
Click to collapse
I'm guessing that is a technical term. Maybe someone should add it to the wiki.
On topic: I flashed r1, but am getting a never ending boot animation (not a loop).
Also tried 'fastboot erase cache'. Will report more when I know it.
EDIT: Same thing happens for me each time I try... never ending bootanimation.
nobnut said:
I'm guessing that is a technical term. Maybe someone should add it to the wiki.
On topic: I flashed r1, but am getting a never ending boot animation (not a loop).
Also tried 'fastboot erase cache'. Will report more when I know it.
Click to expand...
Click to collapse
are you on CM10? Mine didn't boot also. Went back to stock just for Franco <3 and flashed fine.
great share!
Yesss, does this mean you will update your app to work with nexus 7?
Sent from my Nexus 7 using xda premium
danielvc said:
are you on CM10? Mine didn't boot also. Went back to stock just for Franco <3 and flashed fine.
Click to expand...
Click to collapse
That'll be the reason
I totally forgot I was on CM10
leelaa said:
Yesss, does this mean you will update your app to work with nexus 7?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yes, soon.
And yes, it might not boot on CM derivates, this was built from stock ramdisk.
franciscofranco said:
Yes, soon.
And yes, it might not boot on CM derivates, this was built from stock ramdisk.
Click to expand...
Click to collapse
Great stuff, cant wait
Sent from my Nexus 7 using xda premium
Franco, can you update to use the any kernel updater so you don't have to worry about ramdisk? Would be nice to use on aokp
Sent from my Nexus 7 using Tapatalk 2
Grand Prix said:
Franco, can you update to use the any kernel updater so you don't have to worry about zram? Would be nice to use on aokp
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
No, my kernels come bundled with the ramdisk, thats how I use and thats what I prefer, and it won't change. ZRAM? lol...
OK then thank you for your work, good luck to you.
Sent from my Nexus 7 using Tapatalk 2
I know Paranoid Android is CM based - anyone try franco's kernel with it?
ragnarokx said:
I know Paranoid Android is CM based - anyone try franco's kernel with it?
Click to expand...
Click to collapse
It doesn't work on PA.
ragnarokx said:
I know Paranoid Android is CM based - anyone try franco's kernel with it?
Click to expand...
Click to collapse
Try. If it doesn't boot, flashboot boot boot.img of downloaded rom.
Unofficial Cyanogenmod 10.1 (JellyBean 4.2.2)
For the Samsung Galaxy Player 5/ Galaxy S WiFi 5
What is CyanogenMod?
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors of these cell phones.
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Click to expand...
Click to collapse
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
This ROM may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
I shall try to post updated builds 2-3 times per week.
This is built from source using JackpotClavin's device tree, so has the exact same issues.
Download and Installation
Installation Instructions:
JackpotClavin said:
If coming from any ROM OTHER THAN CM10.1:
I just installed the linked CM10.1 build coming from CM10, Paranoid, and Entropy's clockwork recovery from a year ago and had no issues; so hopefully you guys will too. Do me a favor and prior to installing wipe /system, /data, /dbdata (or /datadata or something), and /cache; THEN install. Don't wipe after or else you might wipe the /system_app directory that we're using to install the /system/app on a different partition because our /system isn't large enough.
If coming from a previous version of CM10.1
My zips wipe your /system and /system_app directory (which is the /system/app partition symlinked). That means that you will have to reinstall the Gapps package at the end of every zip! Also, go to the advanced menu in clockwork and wipe your dalvik-cache
In order to boot into recovery after installing this ROM, you must enable development settings by pressing on the build number in the Settings app 7 times; then go into development settings and enable "Advanced reboot." Then reboot your device by holding power and selecting recovery.
Click to expand...
Click to collapse
Downloads:
Rom: cm-10.1-20130723-UNOFFICIAL-venturi.zip - 152.94 MB
Kernel: http://d-h.st/I1Q
Gapps (get the one for 4.2.2): http://goo.im/gapps
Optional (choose one):
Sultan Kernel: http://forum.xda-developers.com/showthread.php?t=2252851
Mercurius Reborn Kernel: http://forum.xda-developers.com/showthread.php?t=2266743
Can't wait to try this out even tho I'm already on Jackpot's cm10.1 ROM!
we might have a slight delay for the first build. I accidentally synced the wrong branch :silly:
I have a quick question I am not really clear on. OK umm do I install entropy's kernel with clockwork mod to flash cm10.1 or I can do it coming from cm10?
Sent from my YP-G70 using xda app-developers app
heet1 said:
I have a quick question I am not really clear on. OK umm do I install entropy's kernel with clockwork mod to flash cm10.1 or I can do it coming from cm10?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
You can do it coming from cm10
Maybe you can have some Linaro and -O3 optimization fun with this
Thank you xD
Sent from my YP-G70 using xda app-developers app
How is this different from jackpots?
Sent from my YP-G70 using xda premium
An1mus said:
How is this different from jackpots?
Sent from my YP-G70 using xda premium
Click to expand...
Click to collapse
its not really different, it just has the latest source code
please keep it stock i you want it still to be cm
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
android1234567 said:
Maybe you can have some Linaro and -O3 optimization fun with this
Click to expand...
Click to collapse
KOala888 said:
please keep it stock i you want it still to be cm
Wysyłane z mojego YP-G70 za pomocą Tapatalk 2
Click to expand...
Click to collapse
I think im gonna have a version with just a clean build, and when i have time, ill experiment with some stuff, but the builds will be kept separate.
Build #1 is up!
http://www.mediafire.com/?nw7pj45txbc52
Code:
78f17b3bb0043428f792c83407d4bc6c cm-10.1-20130505-UNOFFICIAL-venturi_usa.zip
I think android1234567 wanted to tell you to just optimize the output by compiler options, the source is not involved on this
I'll try out this ROM after I back up my stuff!
Whats different this rom to jackpot's rom?
OguzhanVarsak said:
Whats different this rom to jackpot's rom?
Click to expand...
Click to collapse
Read those 2 sites >.<
And stop being idiot here
iurnait said:
I think im gonna have a version with just a clean build, and when i have time, ill experiment with some stuff, but the builds will be kept separate.
Build #1 is up!
http://www.mediafire.com/?nw7pj45txbc52
Code:
78f17b3bb0043428f792c83407d4bc6c cm-10.1-20130505-UNOFFICIAL-venturi_usa.zip
Click to expand...
Click to collapse
Great, I would make a rom myself but my PC would compile it for ages
Just a minor suggestion to add to the OP:
Perhaps, you could put a hyperlink to Jackpot's separate International kernel for those that need to flash it separately. Just a thought.
---------- Post added at 10:11 PM ---------- Previous post was at 10:09 PM ----------
OguzhanVarsak said:
Whats different this rom to jackpot's rom?
Click to expand...
Click to collapse
Somebody already asked this question!
Don't you know the XDA rules?
SEARCH BEFORE YOU ASK A QUESTION! SEARCH THE THREAD! SEARCH THE FORUM!
Stop being a nuisance.
Higgs_Boson said:
Just a minor suggestion to add to the OP:
Perhaps, you could put a hyperlink to Jackpot's separate International kernel for those that need to flash it separately. Just a thought.
Click to expand...
Click to collapse
there is an intl kernel that i compiled on 4-19 that should be in the dl's folder. its the same as Jackpot's
I just installed this. I had to do a full wipe coming from PAC-man.
Seems to be working fine.
One question: In PAC-man there was a performance option in settings menu.
Where did this go?
Do I have to d/l something like SetCPU or is it hidden somewhere?
Nvm. 7 clicks on build enables it.
Thanks for this! One question, when the cm10.1 code changes, is it a speed increase or what? I never really notice. Couldn't find much on the subject for some reason.
Sent from my YP-G70 using xda app-developers app
Galaxy S5 aka kltetmo Hybrid Kernel
What is a Hybrid?
Hybrid kernel means the core although still has the 3.4.0 kernel label, it has incorporated many advanced features available only on Linux 3.8+ and beyond. I have backported many of those advanced features for Linux 3.4, hence the name hybrid!
Here's the flashable zip file
[ GSM (Tmobile USA) ]
Stable Release:
http://faux.romhost.me/kltetmo/kk44/
Beta Release:
http://faux.romhost.me/kltetmo/beta
Change Log:
http://faux.romhost.me/kltetmo/kk44/changelog.txt
Source here:
https://github.com/faux123/Galaxy_S5
Join my Kernel G+ Community for latest greatest betas here:
https://plus.google.com/u/0/communities/100266563627035551841
reserved 1
rserved 2
reserved 3
Looks promising! I'll test and report back. :good:
EDIT: It seems like it borked my wifi. I can connect to open networks but I can't connect to my saved network.
Only for the T-mobile version? Or will it also work on the G900F model?
Now I'm going to HAVE! to buy this device
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Question to the dev or anyone that knows, how do we go about installing the kernel will it be before or after flashing a rom? thanks in advance
Sent from my SM-G900T using Tapatalk
kevinpag said:
It seems like it borked my wifi. I can connect to open networks but I can't connect to my saved network.
Click to expand...
Click to collapse
No issues with wifi here, everything working well for me so far.
After installing the ROM
Sent from my SM-G900P using xda app-developers app
Can I assume that this is compatible with Faux123 Kernel Enhancement Pro
?
if so - can you offer any suggestions for settings?
mocsab said:
Can I assume that this is compatible with Faux123 Kernel Enhancement Pro
?
if so - can you offer any suggestions for settings?
Click to expand...
Click to collapse
of course
faux123 said:
of course
Click to expand...
Click to collapse
Faux, do you think this kernel will work on the G900F?
I'm asking this because the G900F rom's are working on the G900T.
Attempting to set GPU governor to simple_ondemand (using kernel enhancement pro) causes my phone to crash and reboot.
Glad to see you here - and happy you are creating kernels for the TMO S5 - THANKS
You offer a link to a beta but there is no file there - was that intentional - or are you waiting to upload the beta until later?
You listed this kernel as OC/UV -but I don;t see a way to do that - is that coming in a future release? (I can certainly wait for it - just wondering if I am not seeing something I should be seeing...?)
I've pulled the trigger... and flashed this kernel on my G900F... And it's WORKING!! :laugh:
It's working very smooth & nice on my own rom (see my signature).
So you can also post this kernel on the G900F forums if you want more users faux!
edgarf28 said:
I've pulled the trigger... and flashed this kernel on my G900F... And it's WORKING!! :laugh:
It's working very smooth & nice on my own rom (see my signature).
So you can also post this kernel on the G900F forums if you want more users faux!
Click to expand...
Click to collapse
thank you for verification. What is G900F? which carrier/nation?
mocsab said:
Glad to see you here - and happy you are creating kernels for the TMO S5 - THANKS
You offer a link to a beta but there is no file there - was that intentional - or are you waiting to upload the beta until later?
You listed this kernel as OC/UV -but I don;t see a way to do that - is that coming in a future release? (I can certainly wait for it - just wondering if I am not seeing something I should be seeing...?)
Click to expand...
Click to collapse
yes, the simple_ondemand from Qualcomm is very derpy. It will require additional patching before it can work.
faux123 said:
thank you for verification. What is G900F? which carrier/nation?
Click to expand...
Click to collapse
It's the international model. (Unbranded Qualcomm variant)
The forums for this model are: http://forum.xda-developers.com/galaxy-s5
how will this kernel affect battery life? by that i mean, if i leave all settings stock, will it increase or decrease my battery life from stock kernel or be the same?
X-DROID
Hello Everyone!
This is my own Lollipop ROM based on the latest branch in AOSP.
Changelog
I MIXED UP THE CHANGELOGS FOR 1.0 BETA 2 AND 1.1 BETA 1.
ILL ADD THEM IN LATER.
NEED SLEEP [emoji14]
1.0 BETA 1
- Based on branch 5.0.0_r7(LRX21V)
- Fixed Network/Wifi Location
- Fixed a few memory leaks
- Added delete button and confirmation to screenshot notification
- Updated Dialer Icons to Lollipop material design ones
- Advanced Power Menu(Reboot to recovery and bootloader)
- Data activity arrows for Wifi and Mobile data
Click to expand...
Click to collapse
How to root?
Just flash Chainfire's SuperSU 2.27
Click to expand...
Click to collapse
What gapps to flash?
Use any gapps you like! But make sure they are made for Lollipop ROMs!
Click to expand...
Click to collapse
Download
https://www.androidfilehost.com/?w=files&flid=21598
Click to expand...
Click to collapse
Credits
- PA
- Sykopompos
- Google
- CM
Click to expand...
Click to collapse
PS : Before anyone jumps to conclusions, some of my commits on GitHub do not have the original author in them and instead shows me as the author. Some commits, not all. I do not know why this happened. If you open up the commit you will still see the original authors names at the bottom of the commit message. Thank You for understanding!
XDA:DevDB Information
X-Droid, ROM for the Google Nexus 4
Contributors
sd3993
Source Code: https://github.com/exdroid
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1.0 BETA 2
Beta Release Date: 2014-12-03
Created 2014-11-21
Last Updated 2014-12-22
Reserved
Reserved
Thanx for your tim.
I LOVE MY SLUTTY N4
hypemanisus said:
Thanx for your time I would move the thread to android development
I LOVE MY SLUTTY N4
Click to expand...
Click to collapse
This doesn't count as original? I'll have to contact a mod then. It is not possible for regular users to move threads.
Download is live!
To do List:
Screenshots
Special "Flavor"
Kernel
Bugs
Differences between other LP ROMs
Thanks for your work! :good:
LeoPosas said:
To do List:
Screenshots
Special "Flavor"
Kernel
Bugs
Differences between other LP ROMs
Thanks for your work! :good:
Click to expand...
Click to collapse
I haven't tried other LP ROMs so I don't really know the difference. But i have already mentioned what has been added over stock AOSP.
I'll add kernel info, bugs, and screenshots later on along with BETA 2. And what do you mean by 'special flavour'?
Thanks for the suggestions!
sd3993 said:
I haven't tried other LP ROMs so I don't really know the difference. But i have already mentioned what has been added over stock AOSP.
I'll add kernel info, bugs, and screenshots later on along with BETA 2. And what do you mean by 'special flavour'?
Thanks for the suggestions!
Click to expand...
Click to collapse
Special flavor = Unique feature/mine better than yours/my baby/etc
Installed this... The recovery got overwritten I think. It was showing lying android with Red triangle. Had to flash the recovery via fastboot.
Looking good. Will restore the apps. Restore from TiBu is not working. (A reboot has fixed this )
Will check and report back!
nitin.chobhe said:
Installed this... The recovery got overwritten I think. It was showing lying android with Red triangle. Had to flash the recovery via fastboot.
Looking good. Will restore the apps. Restore from TiBu is not working. (A reboot has fixed this )
Will check and report back!
Click to expand...
Click to collapse
Dammit I forgot about the recovery :/ Ill fox it in BETA2!
If you have root just use flashify to install twrp.
If u want to flash via fastboot, use this command
fastboot flash recovery <recovery_file_name>.img
Sent from my Nexus 4
sd3993 said:
Dammit I forgot about the recovery :/ Ill fox it in BETA2!
If you have root just use flashify to install twrp.
If u want to flash via fastboot, use this command
fastboot flash recovery .img
Sent from my Nexus 4
Click to expand...
Click to collapse
Didn't I say I did that
Is this rom also had changes that sykopompos did? Or you worked on factory images and added your changes in it?
Good work in any case :thumbup:
BTW, I use CWM.
Sent from my Nexus 4 using XDA Free mobile app
nitin.chobhe said:
Didn't I say I did that
Is this rom also had changes that sykopompos did? Or you worked on factory images and added your changes in it?
Good work in any case [emoji106]
BTW, I use CWM.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Oh sorry i read 'Had' as 'How'. Happens when you're high
Yes it has some changes made by sykopompos. I reverted the SElinux stuff though now that chainfire managed to get root even with enforcing SELinux.
Sent from my Nexus 4
sd3993 said:
Oh sorry i read 'Had' as 'How'. Happens when you're high
Yes it has some changes made by sykopompos. I reverted the SElinux stuff though now that chainfire managed to get root even with enforcing SELinux.
Sent from my Nexus 4
Click to expand...
Click to collapse
Thanks buddy! What features are you planning to add in this rom?
Sent from my Nexus 4 using XDA Free mobile app
nitin.chobhe said:
Thanks buddy! What features are you planning to add in this rom?
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Honestly i am planning to add a lot of features from KK. But forward porting is being a pain bcoz not only is code change drastic but some of the paths to certain files have also changed. Hence a simple cherry pick is not going to work for deep system level mods. Hence it's taking a lot of time.
ATM i'm working on bringing a network mode toggle to the QS and a vibrate when the other person picks up your call.
Sent from my Nexus 4
So many INDIANS rocking the android development department's of mako
I'll try this ROM now. Thanks !!
Not bad for nearly 2 year old battery...
Kernel: Hellscore b65
CPU max: 1350
Double tap to wake on, nothing else. Mostly on Wi-Fi
Sent from my Nexus 4 using XDA Free mobile app
aviz1911 said:
So many INDIANS rocking the android development department's of mako
I'll try this ROM now. Thanks !!
Click to expand...
Click to collapse
Only commented to be a part of that Indian topic! Go India! ?✌?
PS:- Nice ROM.. Looking forward to future builds!
Looking forward to try the next build!
TheQuarterMile said:
Looking forward to try the next build!
Click to expand...
Click to collapse
Forgot to mention that there is no boot animation. It just displays Android while booting. Hope you add some cool animation in next build
Hello everyone. As you might imagine I hate to see sad faces because of some dev leaving. So i've decided to do something about it. There are many of you which want Temasek funtionalities as also some of you which wants jgcaap ROM speed.
How about a combination of both?
Seems to much to ask but, today I've decided to play a bit and post a build.
Basically you have here is a CyanogenMod ROM with temasek goodies and jgcaap optimizations.
Features:
Updated SQL to 3.9.0.0
New Kernel - v2.75
Optimized Build and compiled with custom GCC (Odexed)
Improved sound with speex resampler
Improved bionic with many optimized libraries
Chamber of Secrets
OnTheGo
3 finger gesture screenshot
TRDS
PIE
OTA's
Unified F2FS & ext4
Lockscreen Gestures
OmniSwitch
AppBar
App Circle bar
Gestures Anywhere
Heads Up Notifications
Network traffic meter
DPI Settings
Proguard 5.2.1
CameraNext
F2FS ready for data and cache (only recommend over cache.)
Sounds good enought?
For best compability, use this firmware update for your device:
Firmware 17/06/2015
Download
All the credits go to CyanogenMod Team, @temasek , @arter97, @katinatez as also many other devs which provided toolchains, support code etc.
Please first test with stock, only after flash other kernels!Source Code
If you like my work, please consider a donation.
reserved
reserved
New build coming in two hours. Download only after Thanks
Glad to see development still going!
Sent from my A0001 using Tapatalk
Flashed. Everything working. Report 2morrow if there r any bugs.
Next build will be a bit more faster please wait for it
Sent from my A0001 using Tapatalk
The file size is a pretty hefty 347MB.. :-/. Previously it was around 300MB....
iTalisman said:
The file size is a pretty hefty 347MB.. :-/. Previously it was around 300MB....
Click to expand...
Click to collapse
Odexing increases size..
Setting.Out said:
Odexing increases size..
Click to expand...
Click to collapse
It's up and ready. Have fun everyone .
I have f2fs all. Is that okay?
Ejvyas said:
I have f2fs all. Is that okay?
Click to expand...
Click to collapse
Yes, as long as it's not also the system partition..
@Vivek_Neel can you do your caf magic pretty please!?
---------- Post added at 11:04 PM ---------- Previous post was at 11:03 PM ----------
Thanks for this awesome combo!! @jgcaap
can we dirty flash over katinatez cm13? i suppose yes, but just to be sure
Inviato dal T.A.R.D.I.S. con il cacciavite sonico
matrixino said:
can we dirty flash over katinatez cm13? i suppose yes, but just to be sure
Inviato dal T.A.R.D.I.S. con il cacciavite sonico
Click to expand...
Click to collapse
NO since this is still cm12.1. It would be a wonder if you wont get stuck in a bootloop :angel:
@jgcaap you mentioned a separate build for xposed users in katinatez' thread, is this statement still valid?
nevertheless thanks for making magic for us OPO users :good:
fiz:ik said:
NO since this is still cm12.1. It would be a wonder if you wont get stuck in a bootloop :angel:
@jgcaap you mentioned a separate build for xposed users in katinatez' thread, is this statement still valid?
nevertheless thanks for making magic for us OPO users :good:
Click to expand...
Click to collapse
Oh dang, i was sure he was going to continue his cm13 branch. Forget me.
Hey @jgcaap, thanks for carrying @katinatez's awesome work forward. Much appreciated.
Found a small boo-boo.. Camera comes up with 'cannot connect to Camera' after a while. I had to delete camera and re-flash Cameranext.zip in recovery. Please take a look.
Thanks!
Oomahey said:
Hey @jgcaap, thanks for carrying @katinatez's awesome work forward. Much appreciated.
Found a small boo-boo.. Camera comes up with 'cannot connect to Camera' after a while. I had to delete camera and re-flash Cameranext.zip in recovery. Please take a look.
Thanks!
Click to expand...
Click to collapse
Ahh I think I know what about... I'll fix tomorow after exams. Enjoy
Sent from my A0001 using Tapatalk
Cm 13 will come... I'm waiting for their fix. You have cm 13 available at drdevs.com compiled with my stuff, I also have a thread for that.
Sent from my A0001 using Tapatalk
Some naive questions..
Jgcaap, thank you so much for your awesome work. I do have some really silly and naive questions and i would like your inputs.
1. Which GAAPS should i flash, I normally use TK Gaaps
2. is there an xposed version we should use
3. is the approach the same (reset, clean flash and then install the xposed and cameranext) ?
Thanks