hello xda please if anyone has goophone i5s please upload the stock rom backup or if u guys know the link to download the rom please reply
thanks in advance
jinishpv said:
hello xda please if anyone has goophone i5s please upload the stock rom backup or if u guys know the link to download the rom please reply
thanks in advance
Click to expand...
Click to collapse
w w w mediafire.com/?hfhtk0j57pr2x35
That's for the deafault rom.
You can also root your device... and install play store.
R u sure the link ur given is the stock rom of goophone i5s
goophone v88 I5
Yes, I am 100% positive that the Rom is Goophone i5s Rom cause I have downloaded it and tried it on my phone. My Phone bricked and I used this to bring my phone back to normal.
Sent from my HTC VLE_U using xda app-developers app
Hai which phone do u have is it goophone i5s where did u buy it I brought goophone i5 from dhgate but instead of goophone i5 I got a goophone i5s(goophone i5 v88)
Sent from my iPhone5 using xda premium
z_man3007 said:
Yes, I am 100% positive that the Rom is Goophone i5s Rom cause I have downloaded it and tried it on my phone. My Phone bricked and I used this to bring my phone back to normal.
Sent from my HTC VLE_U using xda app-developers app
Click to expand...
Click to collapse
wich drivers have you installed to make the goophone i5s visible in flashtool?
just google it micromax A110 then go the company website and download and install the drivers of micromax A110 it has almost the same specs of goophone i5s
Sent from my iPhone5 using xda premium
goophone i5s
ilajuve said:
wich drivers have you installed to make the goophone i5s visible in flashtool?
Click to expand...
Click to collapse
In the following link you will find the driver for Goophone i5s. Scroll down about the middle of the page and you will see the download link. Hopefully, it will help.
http://forum.xda-developers.com/showthread.php?t=2181542&page=4
In the following link you will find the tools, stock rom, how to load Play Store and how to root Goophone i5s.
http://forum.xda-developers.com/showthread.php?t=2181542
---------- Post added at 03:53 AM ---------- Previous post was at 03:49 AM ----------
jinishpv said:
Hai which phone do u have is it goophone i5s where did u buy it I brought goophone i5 from dhgate but instead of goophone i5 I got a goophone i5s(goophone i5 v88)
Sent from my iPhone5 using xda premium
Click to expand...
Click to collapse
I bought my Goophone i5s from Android-sale.com web site. Their shipping is very fast of course, you have to pay extra for quick shipping.
MIUI Rom for Goophone i5s
i want to port MIUI Rom for Goophone i5S. Have anyone tried it, will it support with its current hardware specs.
can someone please post the stock rom? i have bricked the phone
Thanks!
Which phone do u have
Sent from my iPhone5 using xda premium
I have a problem with my smartphone, I can not find the rom. It claims to be an iphone 5 brand goophone but none of the rom works goophone I am attaching my build.prop to you smartphone. Thank you for your attention
Buil Prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=IMM76D
ro.build.display.id=iPhone5
ro.build.version.incremental=eng.root.1356928068
ro.custom.build.version=1356928068
ro.build.version.sdk=15
ro.build.version.codename=REL
ro.build.version.release=6.0.1
ro.build.date=Mon Dec 31 12:28:42 CST 2012
ro.build.date.utc=1356928122
ro.build.type=user
ro.build.user=root
ro.build.host=android-desktop
ro.build.tags=test-keys
ro.product.model=iPhone5
ro.product.brand=Goophone
ro.product.name=iPhone5
ro.product.device=iPhone5
ro.product.board=iPhone5
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=iPhone5
ro.product.locale.language=zh
ro.product.locale.region=CN
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=iPhone5
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=ckt77_cu_ics2-user 4.0.4 IMM76D eng.root.1356928068 test-keys
ro.build.fingerprint=alps/ckt77_cu_ics2/ckt77_cu_ics2:4.0.4/IMM76D/1356928068:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.ICS2.MP.V1.3
ro.mediatek.platform=MT6577
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.ICS2.MP
# end mediatek build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
# MTK, TeChien {
ro.media.enc.hprof.file.format=3gp
ro.media.enc.hprof.codec.vid=m4v
ro.media.enc.hprof.vid.width=720
ro.media.enc.hprof.vid.height=480
ro.media.enc.hprof.vid.fps=30
ro.media.enc.hprof.vid.bps=3400000
ro.media.enc.hprof.codec.aud=amrnb
ro.media.enc.hprof.aud.bps=12200
ro.media.enc.hprof.aud.ch=1
ro.media.enc.hprof.aud.hz=8000
ro.media.enc.mprof.file.format=3gp
ro.media.enc.mprof.codec.vid=m4v
ro.media.enc.mprof.vid.width=352
ro.media.enc.mprof.vid.height=288
ro.media.enc.mprof.vid.fps=30
ro.media.enc.mprof.vid.bps=990000
ro.media.enc.mprof.codec.aud=amrnb
ro.media.enc.mprof.aud.bps=12200
ro.media.enc.mprof.aud.ch=1
ro.media.enc.mprof.aud.hz=8000
ro.media.enc.lprof.file.format=3gp
ro.media.enc.lprof.codec.vid=h263
ro.media.enc.lprof.vid.width=176
ro.media.enc.lprof.vid.height=144
ro.media.enc.lprof.vid.fps=30
ro.media.enc.lprof.vid.bps=384000
ro.media.enc.lprof.codec.aud=amrnb
ro.media.enc.lprof.aud.bps=12200
ro.media.enc.lprof.aud.ch=1
ro.media.enc.lprof.aud.hz=8000
#mogoo begin
ro.boot_animation_switch_code=*#0066#
ro.contacts.sim_auto=true
ro.contacts.sim_insert=true
ro.ril.ecclist=120,112,119
#mogoo end
# MTK, TeChien }
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=128m
# Encrypt phone function
ro.crypto.tmpfs_options=mode=0771,uid=1000,gid=1000
ro.crypto.fs_type=ext4
ro.crypto.fs_real_blkdev=/[email protected]
ro.crypto.fs_mnt_point=/data
ro.crypto.fs_options=noauto_da_alloc
ro.crypto.fs_flags=0x00000406
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
#
# ADDITIONAL_BUILD_PROPERTIES
#
fmradio.driver.chip=3
ro.sf.hwrotation=180
ril.current.share_modem=1
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=2
ro.mediatek.gemini_support=false
ro.operator.optr=OP02
ro.operator.spec=SPEC0200
ro.operator.seg=SEGA
persist.radio.fd.counter=20
persist.radio.fd.off.counter=20
drm.service.enabled=true
fmradio.driver.enable=1
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt[/QUOTE]
I managed to recover my phone. It works full wi fi room runs all touch screen applications. Only the screen is black but lit up in the back with black What should I do?
The rom was used and this multilang-i5s-2G-DATA-REC-SD-0402
Related
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03H
ro.build.display.id=JRO03H
ro.build.version.incremental=V1.00-20130809.001225
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.1
ro.build.date=Fri Aug 9 00:13:05 HKT 2013
ro.build.date.utc=1375978385
ro.build.type=user
ro.build.user=pf
ro.build.host=server70
ro.build.tags=release-keys
ro.product.model=RCT6077W2
ro.product.brand=RCA
ro.product.name=RCT6077W2
ro.product.device=RCT6077W2
ro.product.board=rk2928sdk
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=Foxconn International Holdings Limited
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=rk2928
# ro.build.product is obsolete; use ro.product.device
ro.build.product=rk2928sdk
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=rk2928sdk-user 4.1.1 JRO03H 20130809.001225 release-keys
ro.build.fingerprint=RCA/RCT6077W2/RCT6077W2:4.1.1/JRO03H/V1.00-20130809.001225:user/release-keys
ro.build.characteristics=tablet
# end build properties
#
# system.prop
#
#rild.libpath=/system/lib/libreference-ril-23d.so
#rild.libpath=/system/lib/libreference-ril.so
#rild.libargs=-d /dev/ttyUSB2
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=wifi-only
ro.config.alarm_alert=Alarm_Classic.ogg
dalvik.vm.heapstartsize=5m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
ro.config.facelock=enable_facelock
persist.facelock.detect_cutoff=5000
persist.facelock.recog_cutoff=5000
persist.sys.usb.config=mtp
persist.sys.strictmode.visual=false
dalvik.vm.jniopts=warnonly
ro.rksdk.version=RCT6077W2-ANDROID4.1.1-v1.0.3
sys.hwc.compose_policy=6
sf.power.control=2073600
ro.sf.fakerotation=true
ro.sf.hwrotation=270
ro.rk.MassStorage=false
wifi.interface=wlan0
ro.sf.lcd_density=120
ro.rk.screenoff_time=300000
ro.rk.def_brightness=178
ro.rk.homepage_base=http://www.google.com/webhp?client={CID}&source=android-home
ro.rk.install_non_market_apps=false
ro.rk.wifi_on=false
ro.default.size=100
persist.sys.timezone=America/New_York
ro.product.usbfactory=RCA_usb
wifi.supplicant_scan_interval=15
ro.opengles.version=131072
ro.rk.systembar.voiceicon=false
testing.mediascanner.skiplist=/mnt/sdcard/Android/
ro.kernel.android.checkjni=0
ro.eboda.modem=false
ro.rk.ethernet_enable=false
ro.com.google.clientidbase=android-fih
ro.com.google.gmsversion=4.1_r5
ro.setupwizard.mode=OPTIONAL
ro.com.widevine.cachesize=16777216
ro.rk.bt_enable=false
rild.libargs=-d_/dev/ttyUSB1
ril.pppchannel=/dev/ttyUSB2
rild.libpath=/system/lib/libril-rk29-dataonly.so
ril.function.dataonly=1
ro.product.version=1.0.3
ro.product.ota.host=tablet2.gyrodock.com:2300
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Model Id: Rct6077w2
i have 2 tablets.. one in working order and the other is bricked....but the working tablet has a crack accross screen...is there a way i can making a bottable ROM from my working tablet? and if so can someone tell me how thanks...and it seems as if i never get help on this forum..........very freaking sad that neither this forum or rca wants to help me
added more details of uild prop ...can someone help me......swear you guys are never gonna help me but for why? atm it wont boot past RCA logo..i tried to change the DPI of my now bricked tablet ....and i unrooted it like a dumb ass ...now idk what to do..is there a way i can make a boot image or something i can fix my bricked tablet with? i have access to one tablet in full but everywhere i go says i need root access for both tablets which is freaking annoying..please help me guys and stop just viewing this forum thank you!!!
Search for "CREATE OWN ROM FOR ANY ANDROID DEVICE" in this forum, I cannot provide the link as I am a new user
Maybe you can make a ROM out of your working tablet to flash on the bricked one...
Good luck
el-figurin said:
Search for "CREATE OWN ROM FOR ANY ANDROID DEVICE" in this forum, I cannot provide the link as I am a new user
Maybe you can make a ROM out of your working tablet to flash on the bricked one...
Good luck
Click to expand...
Click to collapse
i respect everything uve ried to do but still wont work atm...ive tried
[Q&A] [Recovery][4.2.x][Allwinner A20]TWRP v2.6.3.0 Softwinners Wing-D9 (JayTech PA1
Q&A for [Recovery][4.2.x][Allwinner A20]TWRP v2.6.3.0 Softwinners Wing-D9 (JayTech PA1051DA)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [Recovery][4.2.x][Allwinner A20]TWRP v2.6.3.0 Softwinners Wing-D9 (JayTech PA1051DA). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
A portable version of [4.2.x][Allwinner A20]TWRP v2.6.3.0 Softwinners Wing-D9
This is ridiculous, I don't want to start this sort of Q/A thread because of the idiotic 10 post rule.
Posting to the orig. thread later...
There: http://forum.xda-developers.com/showthread.php?p=58369512#post58369512
Question
[Q]
My Phone is kmt 300 aka pixcom androtab core 2 aka S779-a20.
I want to make sure if this twrp competible for my divice...
http://forum.xda-developers.com/atta...4&d=1396972254
This my build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.version.incremental=20130809
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Fri Aug 9 16:04:22 CST 2013
ro.build.date.utc=1376035462
ro.build.type=eng
ro.build.user=inet_zw
ro.build.host=inetsuperserver
ro.build.tags=test-keys
ro.product.model=KMT 300
ro.product.brand=softwinners
ro.product.name=wing_inet
ro.product.device=wing-inet
ro.product.board=wing
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=wing-inet
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=wing_inet-eng 4.2.2 JDQ39 20130809 test-keys
ro.build.fingerprint=softwinners/wing_inet/wing-inet:4.2.2/JDQ39/20130809:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
rild.libargs=-d/dev/ttyUSB2
rild.libpath=/system/lib/libsoftwinner-ril.so
keyguard.no_require_sim=true
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
drm.service.enabled=false
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=false
ro.udisk.lable=MID
ro.property.fontScale=1.0
persist.sys.language=id
persist.sys.country=ID
ro.sf.lcd_density=120
ro.setupwizard.mode=DISABLED
ro.build.display.id=A20_K71_K711LC_PG_1307224.2013 1009
ro.config.3ginformation.path=/system/etc/3ginfo.gz
persist.sys.timezone=Europe/Moscow
ro.inet.LauncherTransparent=false
ro.product.firmware=1.3_20130731
dalvik.vm.heapsize=384m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
It's that competible....??
Please help and explain.....
Thanks....
Best regard
DualJoe said:
Yep, that command is responsible for the partitions. Should be fixed now.
But that shell/logs aren't working is not a good thing. Somehow they refuse to load. Probably the shared objects/libs are wrong as well.
Click to expand...
Click to collapse
DualJoe said:
@Wel1973:
Try the attached one. It has the D9 kernel again (but your drivers).
You might need to check how to flash that. The aliases (/dev/block/recovery) seem to be broken. If i check your last working twrp log it should be nandg.
Code:
busybox dd if=recovery.img of=/dev/block/nandg bs=1M
You flashed the wing-k70 recovery (not the wing-inet)?
Click to expand...
Click to collapse
DualJoe said:
If ADB works you can always flash it back. If not you have to fiddle with LiveSuite/PhoenixCard and you probably need a full dd image of your /system partition. But i never needed that so far and i cannot help you with that.
Click to expand...
Click to collapse
DualJoe said:
Thx, nice file size now...
Regarding both images.. I'm quite sure about picking the right touch drivers but i cannot make sure about additional dependencies or loading order. Its possible that it needs some additional tweaking. If anything is not working post both logs again.
Let's see if it runs...
Click to expand...
Click to collapse
Wel1973 said:
Oh man. I´ve got firmware for restore via Phoenixsuite.
Was first i did, searching that for develloper Tab without danger..
I don´t know......whats your screen resolution?? And specs..
If it´s similar...can upload for you.
And them i explain you what to do for install this firmware by Phoenixsuite.
I think you´re on same situation like me at begin..
With the broken partitions, and without being able to recover...
The case is that today, I am very busy. But to the evening I will return to try it.
Click to expand...
Click to collapse
[Q]
My Phone is kmt 300 aka pixcom androtab core 2 aka S779-a20.
Display Resolution : 800x480, allwinner a20 cortex a7
I want to make sure if this twrp competible for my divice...
http://forum.xda-developers.com/atta...4&d=1396972254
This my build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JDQ39
ro.build.version.incremental=20130809
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Fri Aug 9 16:04:22 CST 2013
ro.build.date.utc=1376035462
ro.build.type=eng
ro.build.user=inet_zw
ro.build.host=inetsuperserver
ro.build.tags=test-keys
ro.product.model=KMT 300
ro.product.brand=softwinners
ro.product.name=wing_inet
ro.product.device=wing-inet
ro.product.board=wing
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=ru
ro.product.locale.region=RU
ro.wifi.channels=
ro.board.platform=exDroid
# ro.build.product is obsolete; use ro.product.device
ro.build.product=wing-inet
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=wing_inet-eng 4.2.2 JDQ39 20130809 test-keys
ro.build.fingerprint=softwinners/wing_inet/wing-inet:4.2.2/JDQ39/20130809:eng/test-keys
ro.build.characteristics=tablet
# end build properties
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=Ring_Synth_04.ogg
ro.config.notification_sound=pixiedust.ogg
ro.carrier=unknown
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=0
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
debug.egl.hw=1
ro.display.switch=1
ro.opengles.version=131072
rild.libargs=-d/dev/ttyUSB2
rild.libpath=/system/lib/libsoftwinner-ril.so
keyguard.no_require_sim=true
persist.sys.strictmode.visual=0
persist.sys.strictmode.disable=1
hwui.render_dirty_regions=false
drm.service.enabled=false
persist.sys.usb.config=mass_storage,adb
ro.property.tabletUI=false
ro.udisk.lable=MID
ro.property.fontScale=1.0
persist.sys.language=id
persist.sys.country=ID
ro.sf.lcd_density=120
ro.setupwizard.mode=DISABLED
ro.build.display.id=A20_K71_K711LC_PG_1307224.2013 1009
ro.config.3ginformation.path=/system/etc/3ginfo.gz
persist.sys.timezone=Europe/Moscow
ro.inet.LauncherTransparent=false
ro.product.firmware=1.3_20130731
dalvik.vm.heapsize=384m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
It's that competible....??
Please help
Thanks....
Best regard
help
[Q]
This my dmesg.log
My divice is wing_inet a20 cortex a7 display 800x480
I need twrp for that...
Sorry if i make you're all busy....
Thank's....
Dear all,
After long time I'm back to xda and a stupid mistake i did with my new handset ( Colors x200q - a gionee based phone) bring me here. So, coming straight to the point, I had rooted my phone few months back using vroot and just 2 days ago (in an attempt to make my phone look like Android 4.4 kitkat and make it cooler) I changed few properties in build.prop and installed (basically speaking, tried to install) few android 4.4 basic apps on my handset and now am facing force close errors every now and then.
What I did?
I changed the following properties of build.prop
Code:
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.description=gionee89_cu_jb-user 4.1.2 JZO54K eng.android.1366793389 test-keys
ro.build.fingerprint=alps/TELETALK/TELETALK:4.1.2/JZO54K/1366793389:user/test-keys
to
Code:
ro.build.version.sdk=19
ro.build.version.codename=L
ro.build.version.release=4.4
ro.build.description=gionee89_cu_kk-user 4.4 JZO54K eng.android.1366793389 test-keys
ro.build.fingerprint=alps/TELETALK/TELETALK:4.4/JZO54K/1366793389:user/test-keys
and rebooted my device... Then as some of you might guess, phone start force closing every now and then, especially the google apps. Further i can't access play store and many other applications force close either while opening or mid-way while i'm using them. I can't re-root my phone.
Click to expand...
Click to collapse
What I tried?
I tried hell lot of things (maybe i got panicked at first). Somehow it seems root was not working, and i was unable to restore the original build.prop file.
i tried re-rooting it but without any positive result
tried using adb to push the build.prop file to system only to get permission denied or similar error message
tried doing a factory reset and then started the rooting procedure, again without success
tried flashing superuser.zip file via stock recovery only to get installation aborted error
and many other things which may not be that material...
What Next?
I basically want to restore the old build.prop app which i have and flash/install google apps for andropid 4.1.2 and make everything normal but i've been unsuccessful even after trying for past 3 days. So, am posting it here so that anyone can suggest me something which i might be missing and which will hopefully get my device up and running fully. In the next post, I'll post the details of my handset along with original (almost) build.prop file.
Any suggestion or comments are welcomed! Any good developer who have hands on with Chinese handsets, your inputs will be highly appreciated.
Thanks and Regards,
x200q handset information and build.prop file
Here's the information regarding my handset and build.prop file for your information:
A 5" (likely) phone with 1 GB ram, 4 GB internal storage (only 1 gb usable) and shipped with stock android 4.1.2 jellybean and mostly likely made in china and marketed and sold mostly in Nepal and having details as below:
Code:
Hardware : MT6589
Model : X200Q
Build number : X200Q
Build date UTC : 20130424-085112
Android v : 4.1.2
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V1.P18, 2013/04/15 20:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Apr 24 16:49:32 CST 2013
build.prop file information
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JZO54K
ro.build.version.incremental=eng.android.1366793389
ro.custom.build.version=1366793389
ro.build.version.sdk=16ro.build.version.codename=REL
ro.build.version.release=4.1.2
ro.build.date=Wed Apr 24 16:51:12 CST 2013
ro.build.date.utc=1366793472
ro.build.type=user
ro.build.user=android
ro.build.host=android-6
ro.build.tags=test-keys
ro.product.board=gionee89_cu_jb
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=gionee89_cu_jb
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=gionee89_cu_jb-user 4.1.2 JZO54K eng.android.1366793389 test-keys
ro.build.fingerprint=alps/TELETALK/TELETALK:4.1.2/JZO54K/1366793389:user/test-keys
ro.build.flavor=
ro.build.characteristics=default
# end build properties
# begin mediatek build properties
ro.mediatek.version.release=ALPS.JB.SP.V1
ro.mediatek.platform=MT6589
ro.mediatek.chip_ver=S01
ro.mediatek.version.branch=ALPS.JB.SP
ro.mediatek.version.sdk=1
# end mediatek build properties
# begin gionee build properties
ro.gn.theme.prop=yes
ro.gn.theme.default=/system/app/Android.gnz
ro.gn.extmodel=X200Q
ro.gn.extvernumber=WBW5883TE_0301_T5267
ro.gn.extHWvernumber=Mainboard_P3
ro.gn.gnznvernumber=WBW5883TE_0301_T5413
ro.gn.gnromvernumber=ROM4.1.A
ro.gn.gnvernumber=WBW5883TE_0301_V5413
ro.gn.gnprojectid=WBW5883
ro.gn.gnproductid=WBW5883TE_0301
ro.gn.phone=yes
ro.gn.contacts.support=yes
ro.gn.msgbox.prop=yes
ro.gn.msgsdring.prop=yes
ro.gn.phone.vibrateOnConnect=yes
ro.gn.statusbar.gionee.style=2
ro.gn.settings.OnOffAirplane=yes
ro.gn.phone.overturnMute=yes
ro.gn.phone.powerOnRing=yes
ro.gn.menu.cancel=yes
ro.gn.optrspecsegdef=NONE
persist.sys.timezone=Asia/Katmandu
ro.build.display.id=X200Q
ro.product.model=X200Q
ro.product.brand=TELETALK
ro.product.name=TELETALK
ro.product.device=TELETALK
ro.product.manufacturer=TELETALK
ro.cta.support=no
ro.gn.match.numberlength=8
ro.gn.default.videocall=Colors_Default_Ring_tone.mp3
ro.config.notification_sound=F1_New_SMS.ogg
ro.config.alarm_alert=Alarm_Buzzer.ogg
ro.config.ringtone=Colors_Default_Ring_tone.mp3
ro.gn.default.ringtone2=Colors_Default_Ring_tone.mp3
ro.gn.default.mmstone=F1_New_SMS.ogg
ro.gn.default.mmstone2=F1_New_SMS.ogg
ro.gn.display.single.imei=no
ro.gn.operator.showslot=no
ro.gn.shutdown=yes
ro.gn.mmi.test=yes
ro.gn.gnvernumberrel=01
ro.gn.customerservice=no
ro.gn.shutdown.noconfirm=yes
ro.gn.contacts.newfeature=yes
ro.gn.contacts.gndialersearch=yes
ro.gn.music.srs=no
ro.gn.email.prop=yes
ro.gn.oversea.product=yes
ro.gn.oversea.custom=NEPAL_TELETALK
ro.gn.popupmsg.prop=no
ro.gn.encryption.prop=yes
ro.gn.transparent.prop=yes
ro.gn.settings.prop=yes
gn.mmi.mic2=no
gn.mmi.keytest.menu=yes
gn.mmi.keytest.app=no
gn.mmi.keytest.hall=yes
gn.mmi.sensor.gyro=no
# end gionee build properties
ro.gn.theme.style=0
ro.gn.soundrecorder.support=yes
ro.gn.zoomclipview.prop=yes
ro.gn.operator.showdigitalslot=yes
ro.gn.delayupdateSignalStrength=no
ro.gn.force.open.optr=no
ro.gn.export.import.support=yes
ro.gn.popdefaultvalue.prop=no
ro.gn.email.cn.support=yes
ro.gn.settings.autotime.prop=yes
ro.gn.singlescreen.support=yes
ro.gn.screenshot.prop=no
ro.gn.oversea.odm=yes
ro.gn.phone.nowallpaper=no
ro.gn.remove.calendar.lunar=yes
ro.gn.usb.ui.support=yes
ro.gn.gemini.ringtone.support=yes
ro.gn.mtk.poweroff.alarm.prop=yes
ro.gn.flip.support=yes
ro.gn.switchstorage.prop=yes
ro.gn.check.autotime.prop=yes
ro.gn.systemui.theme.support=yes
ro.gn.newfeature.v3=yes
ro.gn.powerprofile.support=yes
ro.gn.theme.net.support=no
ro.gn.theme.combinpkg=com.android.camera&com.android.gallery3d
ro.gn.change.support=yes
ro.gn.gallery=yes
ro.gn.cell.conn.platform.4.1=yes
ro.gn.oversea.weather.source=customweather
ro.gn.audioprofile.support=yes
ro.gn.sms.recipient.limit=200
ro.gn.wifidirect.support=yes
ro.gn.android.4.1=yes
ro.gn.changer.online.support=no
ro.gn.remove.custom.theme=yes
ro.gn.changer.removefont=yes
gn.lwallpaper.vu.mater=no
gn.lwallpaper.colors=no
gn.lwallpaper.waveform=no
gn.lwallpaper.polarclock=no
gn.lwallpaper.magicsmoke=no
gn.lwallpaper.frequency=no
ro.gn.email.generalsignature=yes
ro.gn.msg.delivered.icon.prop=yes
ro.gn.oversea.salestrack=yes
ro.gn.salesstatistic.support=
ro.mtk.vt3g324m.support=yes
ro.gn.auto.answercall.headset=yes
ro.gn.camera.12m.support=yes
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=131072
wifi.direct.interface=p2p0
#Gionee zjy modify for 20120911
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapsize=256m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp,mass_storage
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ril.specific.sm_cause=0
gps.solution.combo.chip=1
ril.external.md=0
fmradio.driver.chip=3
persist.mtk.wcn.combo.chipid=-1
ro.sf.hwrotation=0
ril.current.share_modem=2
launcherplus.allappsgrid=2d
launcher2.allappsgrid=3d_20
curlockscreen=102
ro.mediatek.gemini_support=true
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
drm.service.enabled=true
fmradio.driver.enable=1
ril.first.md=1
ril.flightmode.poweroffMD=1
ril.telephony.mode=1
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=MT6628
mediatek.wlan.module.postfix=_mt6628
ro.config.notification_sound=Proxima.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.config.ringtone=Backroad.ogg
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Can you restore the original image somehow (a factory reset only formats /data/; restoring the original image also brings back /system/ to its original state)? It differs from manufacturer to manufacturer.
If you can't do that and you can't root it, then there's nothing else to do.
GermainZ said:
Can you restore the original image somehow (a factory reset only formats /data/; restoring the original image also brings back /system/ to its original state)? It differs from manufacturer to manufacturer.
If you can't do that and you can't root it, then there's nothing else to do.
Click to expand...
Click to collapse
Thanks for your input! I could have done that provided i have the original image of the device. Since, i had stock recovery i couldn't backup it before.... And further, unfortunately, i'm unable to find stock rom for x200q anywhere in the internet.
The farthest i have gone is here http://androidxda.com/download-colors-stock-rom-models ,but ,it appears to be a dummy holder since, as soon as i try to open/download the rom it throws out quota exceeded error (whatever time i try). But, again download link for other devices are working (i tied few randomly).
Anyway, hope someone who has faced similar issue can provide some new inputs.
You can now download it .
I'm sure that you already have fixed your phone but the download from Android XDA seems working now . Glad to know that you are from Chitwan too . I own a Colors Xfactor HD and have been using it nearly for 2 years . You can also check my channel if you like on youtube.
https://www.youtube.com/channel/UCqHAzW8B_Ym3nCKdyrENJpA
X200Q Clockworkmod flashable Stock Rom
Yup, Like my friend said on previous post. I was somehow able to get it sorted out.
Further, I've made a clockworkmod flashable zip file of the stock rom (and the good thing is it's pre-rooted) so that anybody having the handset can easily install/flash the stock firmware as well as get root access.
You can download the same from : http://www.mediafire.com/?fnn6uiwud7obr
If anybody who's good at chinese handsets let's port a MIUI to this device. More details at : http://en.miui.com/forum.php?mod=viewthread&tid=189222&page=&extra=#pid3564198
need a custom recovery fir era 4g chipset is SC9830A
Sorry forget abt it ....buddy there is developer support for ur mob
Sent from my titan using Tapatalk
Raakib Zargar said:
need a custom recovery fir era 4g chipset is SC9830A
Click to expand...
Click to collapse
Try porting lenovo a1000 twrp to your device.
Just Google it, and you will found twrp on needrom site.
For porting. Replace kernel zimage + dtimage and modify etc/recovery.rc and default.prop that's it.
It will work on your Xolo era x 4g. I am 100‰ sure..
Sent from my LYF_LS-4006 using XDA-Developers Legacy app
Bit too scary
ahtesham01 said:
Try porting lenovo a1000 twrp to your device.
Just Google it, and you will found twrp on needrom site.
For porting. Replace kernel zimage + dtimage and modify etc/recovery.rc and default.prop that's it.
It will work on your Xolo era x 4g. I am 100‰ sure..
Sent from my LYF_LS-4006 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Man I can't do it myself. Even if I try and my Mobile brick it's horrible
You can do it please
CheifX said:
Man I can't do it myself. Even if I try and my Mobile brick it's horrible
You can do it please
Click to expand...
Click to collapse
Port my twrp recovvery to your xolo erax 4g. if you port my recovery then you have to replace kernel zimage and dt_image. thats is. it will work on your device. and i have also builded a cn12.1 custom rom for a sprd sp9830a based device. and it can be port to your device. here you can download my recovery and rom www.mrhhacking.com
Oo
ahtesham01 said:
Port my twrp recovvery to your xolo erax 4g. if you port my recovery then you have to replace kernel zimage and dt_image. thats is. it will work on your device. and i have also builded a cn12.1 custom rom for a sprd sp9830a based device. and it can be port to your device. here you can download my recovery and rom www.mrhhacking.com
Click to expand...
Click to collapse
I don't have my bootloader unlocked too do you think after porting ur recovery it's still gonna work becoz I hav already failed with some of recovery I tried. And how much big risk will be of having device bricked(hard) if I do anything wrong.
CheifX said:
I don't have my bootloader unlocked too do you think after porting ur recovery it's still gonna work becoz I hav already failed with some of recovery I tried. And how much big risk will be of having device bricked(hard) if I do anything wrong.
Click to expand...
Click to collapse
first root your device and then goto developer mode and unlock the bootloader, and then flash my twrp recovery, and there is no risk or hard brick. but don't forget to replace kernel and dt_image in recovery. Just do it bro. And one thing my twrp recovery have a bug. its showing everything yellow in place of blue, but expect this everything working.
No root
ahtesham01 said:
first root your device and then goto developer mode and unlock the bootloader, and then flash my twrp recovery, and there is no risk or hard brick. but don't forget to replace kernel and dt_image in recovery. Just do it bro. And one thing my twrp recovery have a bug. its showing everything yellow in place of blue, but expect this everything working.
Click to expand...
Click to collapse
If I could root my phone I would have easily installed it. And don't tell me to use those software coz none of them worked. I mean it worked when I was using lollipop but once I upgrade to 6.0 I just doesn't.
CheifX said:
If I could root my phone I would have easily installed it. And don't tell me to use those software coz none of them worked. I mean it worked when I was using lollipop but once I upgrade to 6.0 I just doesn't.
Click to expand...
Click to collapse
Hey do you know how to change SIM card programming on a samsung j320w8 model
Build props are:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=MMB29K
ro.build.display.id=MMB29K.J320W8VLU2AQG4
ro.build.version.incremental=J320W8VLU2AQG4
ro.build.version.sdk=23
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=6.0.1
ro.build.version.security_patch=2017-08-01
ro.build.version.base_os=
ro.build.date=Thu Jul 27 16:27:45 KST 2017
ro.build.date.utc=1501140465
ro.build.type=user
ro.build.user=dpi
ro.build.host=SWDG5308
ro.build.tags=release-keys
ro.build.flavor=j3xltebmc-user
ro.product.model=SM-J320W8
ro.product.brand=samsung
ro.product.name=j3xltebmc
ro.product.device=j3xltebmc
ro.product.board=universal3475
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.cpu.abilist=armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=
ro.product.manufacturer=samsung
ro.product.locale=en-CA
ro.wifi.channels=
ro.board.platform=exynos3
# ro.build.product is obsolete; use ro.product.device
ro.build.product=j3xltebmc
# Do not try to parse description, fingerprint, or thumbprint
ro.build.description=j3xltebmc-user 6.0.1 MMB29K J320W8VLU2AQG4 release-keys
ro.build.fingerprint=samsung/j3xltebmc/j3xltebmc:6.0.1/MMB29K/J320W8VLU2AQG4:user/release-keys
ro.build.characteristics=phone
# Samsung Specific Properties
ro.build.PDA=J320W8VLU2AQG4
ro.build.hidden_ver=J320W8VLU2AQG4
ro.config.rm_preload_enabled=0
ro.build.changelist=11966159
ro.product_ship=true
ro.build.official.release=true
ro.chipname=exynos3475
# end build properties
#
# HWUI_BUILD_PROPERTIES
#
ro.hwui.texture_cache_size=24
ro.hwui.layer_cache_size=16
ro.hwui.path_cache_size=4
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.shape_cache_size=1
ro.hwui.gradient_cache_size=0.5
ro.hwui.drop_shadow_cache_size=2
ro.hwui.r_buffer_cache_size=2
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=512
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
#
# from device/samsung/j3xltebmc/system.prop
#
#
# system.prop for universal3475
#
# set lcd density
ro.sf.lcd_density=320
ro.arch=exynos3475
ro.kernel.qemu=0
ro.kernel.qemu.gles=1
persist.hdmi.hdcp_enabled=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.astcenc.astcsupport=1
ro.mct.compressiontype=ETC1
ro.config.tima=1
ro.config.timaversion=3.0
ro.config.dmverity=true
ro.config.kap=true
ro.telephony.default_network=9
persist.radio.sib16_support=0
dalvik.vm.image-dex2oat-filter=speed
dalvik.vm.dex2oat-filter=speed
ro.opengles.version=196609
ro.sf.lcd_density=320
debug.hwui.render_dirty_regions=false
dalvik.vm.heapgrowthlimit=128m
dalvik.vm.heapstartsize=8m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.securestorage.support=true
ro.build.scafe=capuccino
ro.build.scafe.size=short
ro.build.scafe.cream=white
ro.build.scafe.shot=single
ro.build.scafe.version=2016A
security.mdpp.mass=skmm
ro.frp.pst=/dev/block/persistent
ro.security.vpnpp.ver=1.4
ro.security.vpnpp.release=6.1
ro.sec.fle.encryption=true
ro.error.receiver.default=com.samsung.receiver.error
ro.config.dha_pwhitelist_enable=1
ro.config.pre_max_kill_enable=true
ro.config.dha_adj_cached_factor=true
ro.config.ringtone=Over_the_Horizon.ogg
ro.config.notification_sound=Skyline.ogg
ro.config.alarm_alert=Morning_Flower.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.config.ringtone_2=Basic_Bell.ogg
ro.config.notification_sound_2=S_Charming_Bell.ogg
keyguard.no_require_sim=true
ro.carrier=unknown
ro.com.google.clientidbase=android-samsung
ro.security.icd.flagmode=multi
security.ASKS.policy_version=000000
ro.ril.hsxpa=1
ro.ril.gprsclass=10
ro.adb.qemud=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=6.0_r12
ro.build.selinux=1
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm.variant=cortex-a7
dalvik.vm.isa.arm.features=default
ro.config.knox=v30
ro.kernel.qemu=0
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.build.version.sdl=2301
ro.expect.recovery_id=0x735abef8aa69a25796572940302f6cfc1904b608000000000000000000000000
Hi guys head to the new thread
and join our telegram https://t.me/doogee_mixv2
the new thread is lineageos
All works fine? Can post some screen capture?
proof of it working
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
Click to expand...
Click to collapse
Can you post more pictures? I want to see what is the difference.
It runs android 8.0 here is a video:
https://mega.nz/#!825HHCwb!TPuN3R9pcXyKYRva_Q93tzqzFQvqM_h-pIeqZ1h63cs
Can you do a stable custom rom for Doogee Mix based on Pie (Android 9) ?
Dr23890 said:
Can you do a stable custom rom for Doogee Mix based on Pie (Android 9) ?
Click to expand...
Click to collapse
Probably but let's see if this works with all devices and android pie to be fully released
Has anyone else installed the rom yet, if you have is it working
Nice development. It's a good beginning.
We'll all take it from there.
Downloading to try out.
Seems the ROM is still Android 7.0. Although downloaded, it is important to but yet Flash.
Extracted from manifest/build.prop
# begin build properties
# autogenerated by buildinfo.sh
ro.build.cta=noncta
ro.meizu.build.spt=0
ro.build.id=NRD90M
ro.build.mask.id=7.0-1528948024_intlstable
ro.build.inside.id=7.0-20180614114704
ro.build.version.incremental=1527197630
ro.build.version.sdk=24
ro.build.version.preview_sdk=0
ro.build.version.codename=REL
ro.build.version.all_codenames=REL
ro.build.version.release=7.0
ro.build.version.security_patch=2018-05-05
ro.build.version.base_os=
ro.build.date=Thu Jun 14 11:49:33 CST 2018
ro.build.date.utc=1528948173
ro.build.type=user
ro.build.user=flyme
ro.build.host=mz-builder-9
ro.build.tags=release-keys
ro.build.flavor=full_mz6757_66_92l_n-user
# ro.product.cpu.abi and ro.product.cpu.abi2 are obsolete,
# use ro.product.cpu.abilist instead.
ro.product.cpu.abi=arm64-v8a
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi
ro.product.cpu.abilist32=armeabi-v7a,armeabi
ro.product.cpu.abilist64=arm64-v8a
ro.product.locale=en-US
ro.wifi.channels=
ro.board.platform=mt6757
# ro.build.product is obsolete; use ro.product.device
# Do not try to parse description, fingerprint, or thumbprint
ro.build.characteristics=default
ro.product.brand=Meizu
ro.product.manufacturer=Meizu
ro.product.model=PRO 7
ro.meizu.product.model=PRO7S
ro.build.display.id=Flyme 7.0.0.0G
ro.product.name=meizu_PRO7S
ro.product.device=PRO7S
ro.product.board=PRO7S
# ro.build.product is obsolete; use ro.product.device
ro.build.product=PRO7S
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=meizu_PRO7S-user 7.0 NRD90M 1527197630 release-keys
ro.build.fingerprint=Meizu/meizu_PRO7S/PRO7S:7.0/NRD90M/1527197630:user/release-keys
ro.meizu.project.id=M1792L-6
ro.product.flyme.model=M1792L
ro.build.flyme.version=7
ro.flyme.published = true
# end build properties
ro.meizu.build.number=201806141200
#
# from device/meizu/mz6757_66_92l_n/system.prop
#
#
# system.prop for generic sdk
#
rild.libpath=mtk-ril.so
rild.libargs=-d /dev/ttyC0
# MTK, Infinity, 20090720 {
wifi.interface=wlan0
# MTK, Infinity, 20090720 }
# MTK, mtk03034, 20101210 {
ro.mediatek.wlan.wsc=1
# MTK, mtk03034 20101210}
# MTK, mtk03034, 20110318 {
ro.mediatek.wlan.p2p=1
# MTK, mtk03034 20110318}
# MTK, mtk03034, 20101213 {
mediatek.wlan.ctia=0
# MTK, mtk03034 20101213}
#
wifi.tethering.interface=ap0
#
ro.opengles.version=196610
# ro.kernel.qemu=1
# ro.kernel.qemu.gles=0
wifi.direct.interface=p2p0
#dalvik.vm.heapgrowthlimit=256m
#dalvik.vm.heapsize=512m
# USB MTP WHQL
ro.sys.usb.mtp.whql.enable=0
# Power off opt in IPO
sys.ipo.pwrdncap=2
ro.sys.usb.storage.type=mtp
# USB BICR function
ro.sys.usb.bicr=yes
# USB Charge only function
ro.sys.usb.charging.only=yes
# audio
ro.camera.sound.forced=0
ro.audio.silent=0
ro.zygote.preload.enable=0
# temporary enables NAV bar (soft keys)
qemu.hw.mainkeys=0
ro.kernel.zio=38,108,105,16
#ro.kernel.qemu=1
#ro.kernel.qemu.gles=0
#ro.boot.selinux=disable
# Disable dirty region for Mali
#debug.hwui.render_dirty_regions=false
ro.sf.lcd_density=480
# performance
ro.mtk_perf_simple_start_win=1
ro.mtk_perf_fast_start_win=1
ro.mtk_perf_response_time=1
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.hardware.hifi.support=true
ro.setupwizard.require_network=any
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=7.0_201803
ro.com.google.clientidbase=android-meizu
ro.product.first_api_level=24
ro.com.android.dateformat=MM-dd-yyyy
ro.config.ringtone=03_Flyme.ogg
ro.config.notification_sound=02_Reminder.ogg
ro.config.mms_sound=01_Triumph.ogg
ro.config.email_sound=02_Reminder.ogg
ro.config.calendar_sound=03_Doorbell.ogg
ro.config.alarm_alert=19_Waltz.ogg
log.tag.VibeTonz=ERROR
ro.carrier=unknown
persist.mtk_ct_volte_support=1
ro.mediatek.chip_ver=S01
ro.mediatek.platform=MT6757
ro.telephony.sim.count=2
persist.radio.default.sim=0
ril.specific.sm_cause=0
bgw.current3gband=0
ril.external.md=0
ro.mtk_cam_lomo_support=1
ro.sf.hwrotation=0
persist.radio.fd.counter=15
persist.radio.fd.off.counter=5
persist.radio.fd.r8.counter=15
persist.radio.fd.off.r8.counter=5
drm.service.enabled=true
fmradio.driver.enable=0
mtk.eccci.c2k=enabled
ril.first.md=1
ril.flightmode.poweroffMD=0
ril.telephony.mode=0
dalvik.vm.mtk-stack-trace-file=/data/anr/mtk_traces.txt
mediatek.wlan.chip=CONSYS_MT6757
mediatek.wlan.module.postfix=_consys_mt6757
ril.read.imsi=1
ril.radiooff.poweroffMD=0
ro.frp.pst=/dev/block/platform/mtk-msdc.0/11230000.msdc0/by-name/frp
ro.mtk_protocol1_rat_config=C/Lf/Lt/W/T/G
ro.mediatek.version.branch=alps-mp-n0.mp5
ro.mediatek.version.release=alps-mp-n0.mp5-V1.36_mz6757.66.92l.n_P1
ro.mediatek.version.sdk=4
ro.num_md_protocol=2
persist.radio.multisim.config=dsds
ro.mtk_wapi_support=1
ro.mtk_bt_support=1
ro.mtk_wappush_support=1
ro.mtk_agps_app=1
ro.mtk_audio_tuning_tool_ver=V2.2
ro.mtk_wlan_support=1
ro.mtk_gps_support=1
ro.mtk_omacp_support=1
ro.mtk_search_db_support=1
ro.mtk_dialer_search_support=1
ro.mtk_dhcpv6c_wifi=1
ro.have_aacencode_feature=1
ro.mtk_fd_support=1
ro.mtk_oma_drm_support=1
ro.mtk_cta_drm_support=1
ro.mtk_widevine_drm_l3_support=1
ro.mtk_eap_sim_aka=1
ro.mtk_send_rr_support=1
ro.mtk_emmc_support=1
ro.mtk_tetheringipv6_support=1
ro.mtk_c2k_support=1
persist.radio.flashless.fsm=0
persist.radio.flashless.fsm_cst=0
persist.radio.flashless.fsm_rw=0
ro.cdma.cfu.enable=*72
ro.cdma.cfu.disable=*720
ro.cdma.cfb.enable=*90
ro.cdma.cfb.disable=*900
ro.cdma.cfnr.enable=*92
ro.cdma.cfnr.disable=*920
ro.cdma.cfdf.enable=*68
ro.cdma.cfdf.disable=*680
ro.cdma.cfall.disable=*730
ro.cdma.cw.enable=*74
ro.cdma.cw.disable=*740
telephony.lteOnCdmaDevice=1
ro.telephony.default_network=10,10
ro.mtk_shared_sdcard=1
ro.mtk_enable_md1=1
ro.mtk_enable_md3=1
ro.mtk_afw_support=1
ro.mtk_soter_support=1
ro.meizu_soter_support=1
ro.mtk_aal_support=1
ro.mtk_pq_support=2
ro.mtk_pq_color_mode=1
ro.mtk_blulight_def_support=1
ro.mtk_wfd_support=1
ro.mtk_wifi_mcc_support=1
ro.mtk_sim_hot_swap=1
ro.mtk_bip_scws=1
ro.mtk_world_phone_policy=0
ro.mtk_md_world_mode_support=1
ro.mtk_perfservice_support=1
ro.mtk_sim_hot_swap_common_slot=1
ro.mtk_cta_set=1
ro.mtk_zsdhdr_support=1
ro.mtk_cam_mfb_support=3
ro.mtk_cam_dualdenoise_support=1
ro.mtk_slow_motion_support=1
ro.mtk_cam_img_refocus_support=1
ro.mtk_lte_support=1
ro.mtk_rild_read_imsi=1
ro.sim_refresh_reset_by_modem=1
ro.mtk_external_sim_support=1
ro.mtk_external_sim_only_slots=0
ro.mtk_bg_power_saving_ui=1
ro.sim_me_lock_mode=0
ro.mtk_dual_mic_support=1
ro.mtk_is_tablet=0
ro.mtk_pow_perf_support=1
persist.mtk_nlp_switch_support=1
persist.mtk_ims_support=1
ro.mtk_multiple_ims_support=1
persist.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.mtk_vilte_support=0
ro.mtk_vilte_ut_support=0
wfd.dummy.enable=1
wfd.iframesize.level=0
ro.mediatek.project.path=device/meizu/mz6757_66_92l_n
ro.mtk_microtrust_tee_support=1
ro.flyme_softsim_mtee_enable=1
persist.mtk.wcn.combo.chipid=-1
persist.mtk.wcn.patch.version=-1
persist.mtk.wcn.dynamic.dump=0
service.wcn.driver.ready=no
service.wcn.coredump.mode=0
persist.mtk.connsys.poweron.ctl=0
persist.mtk_epdg_support=1
ro.com.android.mobiledata=true
persist.radio.mobile.data=0,0
persist.radio.fourgOff=1
persist.meta.dumpdata=0
ro.mtk_deinterlace_support=1
ro.mtk_md_sbp_custom_value=0
persist.radio.mtk_dsbp_support=1
persist.mtk_dynamic_ims_switch=1
persist.radio.mtk_ps2_rat=W/G
persist.radio.mtk_ps3_rat=G
ro.boot.opt_c2k_lte_mode=2
ro.boot.opt_md1_support=12
ro.boot.opt_md3_support=2
ro.boot.opt_lte_support=1
ro.boot.opt_irat_support=1
persist.log.tag.DCT=D
ro.boot.opt_eccci_c2k=1
ro.boot.opt_using_default=1
ro.boot.opt_c2k_support=1
persist.log.tag.C2K_AT=I
persist.log.tag.C2K_RILC=I
persist.log.tag.C2K_ATConfig=I
mtk.vdec.waitkeyframeforplay=1
ro.sys.sdcardfs=1
ro.media.maxmem=500000000
persist.log.tag.CdmaMoSms=I
persist.log.tag.CdmaMtSms=I
ro.mtk_log_hide_gps=0
ro.mtk_modem_monitor_support=1
ro.have_aee_feature=1
ro.meizu.ess.support=1
persist.power.usetwilightadj=true
ro.meizu.enable.stepcounter=true
ro.meizu.carrier.model=M792H
persist.sys.timezone=Asia/Shanghai
persist.sys.meizu.region=cn
persist.sys.meizu.codepage=gbk
ro.meizu.setupwizard.flyme=true
ro.meizu.setupwizard.setlang=true
ro.meizu.region.enable=true
ro.meizu.contactmsg.auth=false
ro.meizu.customize.pccw=false
ro.meizu.autorecorder=true
ro.meizu.visualvoicemail=true
ro.meizu.security=false
ro.meizu.permanentkey=false
ro.meizu.sip.support=true
ro.meizu.voip.support=false
sys.meizu.m35x.white.config=false
sys.meizu.white.config=false
persist.sys.log-main.enable=0
persist.sys.log-system.enable=0
persist.sys.log-events.enable=0
persist.sys.log-radio.enable=0
persist.sys.at.open=0
persist.sys.use.flyme.icon=true
ro.adb.secure=1
keyguard.no_require_sim=true
persist.sys.keyguard_intercept=true
persist.sys.cts_state=false
persist.sys.cts_Myanmar_state=false
persist.sys.disable_blur_view=true
persist.sys.static_blur_mode=false
ro.meizu.published.type=prd
ro.meizu.upgrade.config=true
ro.meizu.build.branch=M1792L_MNF7_mp1
ro.meizu.build.devowner=meizu
qemu.hw.mainkeys=1
persist.sf.dualdisplay=1
persist.perf.url.wxhb=https://wx.gtimg.com/hongbao/1800/hb.png
debug.hwui.render_dirty_regions=true
ro.hwui.disable_asset_atlas=true
dalvik.vm.heapgrowthlimit=256m
dalvik.vm.heapsize=512m
ro.mtk_benchmark_boost_tp=1
debug.choreographer.skipwarning=3
persist.perf.wm_static_blur=true
ro.sys.fw.bservice_enable=true
ro.sys.fw.bservice_limit=5
ro.sys.fw.bservice_age=5000
debug.remote.config.disable=true
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.fbo_cache_size=48
ro.hwui.path_cache_size=32
ro.hwui.r_buffer_cache_size=9
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.gradient_cache_size=4
ro.hwui.drop_shadow_cache_size=8
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.product.perf.config=M1792L_base
persist.sf.startingwindow.gles=0
persist.sys.app.thread=4
persist.sys.plugin.thread=4
persist.sys.plugin.compiler=interpret-only
persist.sys.plugin.path=/data/data/|/data/user/
persist.sys.mstore.dl.num=1
persist.sf.ssr.controlbar=0
persist.sys.sf.camera=1
persist.thermalmanager.enable=true
persist.thermalmanager.path=/vendor/bin/thermal_manager
persist.thermalconfig.off=/vendor/etc/.tp/thermal.off.conf
persist.thermalconfig.powersave=/vendor/etc/.tp/thermal.low.conf
persist.thermalconfig.mid=/vendor/etc/.tp/thermal.mid.conf
persist.thermalconfig.high=/vendor/etc/.tp/thermal.high.conf
persist.mtkperfservice.enable=false
persist.sys.dalvik.vm.lib.2=libart.so
dalvik.vm.isa.arm64.variant=cortex-a53
dalvik.vm.isa.arm64.features=default
dalvik.vm.isa.arm.variant=cortex-a53
dalvik.vm.isa.arm.features=default
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.recovery.matrix.ver=VER_20180226_00
ro.meizu.recovery.forceencrypt=true
ro.expect.recovery_id=0x82bbeb6a41e61acfcbe408b222a43ff75d63b36e000000000000000000000000
Click to expand...
Click to collapse
The build.prop hasn't been edited I have been told that it is 7.0 so I will update it soon ALSO THERE ARE UPDATED INSTRUTIONS WHERE YOU CAN DOWNLOAD THE ROM
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP: https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
Can you please clarify the instructions on how to use the sp flashtool with your custom rom?
Also,the attempt to flash the android oreo flyme os zip file fails with twrp 3.1.1 .
Dr23890 said:
Can you please clarify the instructions on how to use the sp flashtool with your custom rom?
Also,the attempt to flash the android oreo flyme os zip file fails with twrp 3.1.1 .
Click to expand...
Click to collapse
also here is some info https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
SP FLASH TOOL HERE IS A VIDEO: https://www.youtube.com/watch?v=hpunZq0X2KM
Big_beef_baby said:
also here is some info https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
SP FLASH TOOL HERE IS A VIDEO:
Click to expand...
Click to collapse
Here is the error i'm getting when trying to flash by the sp flash tool.
The scatter file seems to be a problem
---------- Post added at 11:49 AM ---------- Previous post was at 11:26 AM ----------
Dr23890 said:
Here is the error i'm getting when trying to flash by the sp flash tool.
The scatter file seems to be a problem
Click to expand...
Click to collapse
Unable to upload the direct image here because i get the 'bad request' error.
So here is the picture of the scatter file error : https://imgur.com/a/wyz3ua5
THIS SHOULD HELP YOU WITH THE SCATTER FILE:
IF NOT USE THIS
USE TWRP BUT BEFORE READ THIS: https://androidforums.com/threads/twrp-wont-flash-any-roms.914938/
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP: https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
It looks cool. Did this rom have any bugs?
I will try when the oreo version comes out.
Ersid Kapaj said:
It looks cool. Did this rom have any bugs?
I will try when the oreo version comes out.
Click to expand...
Click to collapse
I an working on a fully stable version i am finishing it also I am working on porting lineageos
Donate to me at: https://www.paypal.me/zaheer2004
Any news on lineage
I want Android O 8.1 in Doogee Mix 2. Please Help me
Big_beef_baby said:
Doogee mix flyme os 7 I am not responsible for any harm done to you device I have tested on mine and it is working
(USE SP FLASH TOOL)
FIRST FLASH TWRP MORE INFO HERE:
https://forum.xda-developers.com/doogee-mix/development/test-unofficial-doogee-mix-twrp-t3648831
ROM LINK:
https://mega.nz/#!U74hiIRC!74MTmf9dSlEqmJ9htXSHWbJ8cBqAxARppGBZD469icg
BEFORE UPDATING TO 7.1 FLASH THE ABOVE ROM THEN FLASH UPDATE.ZIP VIA THE SETTINGS OR SP FLASH TOOLS (OREO COMING SOON)
UPADTE.ZIP:
https://mega.nz/#!Ru5gTYCC!Yhd9v09yBDa_ooNFvMW5-KSiHLupV_zCL8S4W90zPCc
INSTALLING USE SO FLASH TOOLS
EDIT THE SCATTER FILE HERE IS A VIDEO
WITH TWRP JUST REMOVE ZIP SIGNATURE VERIFICATION
ALSO I AM WORKING ON PORTING LINEAGEOS SO SUBSCRIBE FOR THAT
Click to expand...
Click to collapse
Im getting error code 7 while flash in twrp? Can u help?