Related
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Easy get seus and reflash your phone stock or boot into recovery ,,, using charging phone power on phone unplug charger use a back up ,,if you can't start again rember to do back ups
saurabh12311 said:
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Click to expand...
Click to collapse
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,
still hanging in death rope
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Ooooooo you have a mini ,,,not pro ok you got the rong rom ok there is a hard reset. http://www.youtube.com/watch?v=2cvExle8S4o&feature=youtube_gdata_player
saurabh12311 said:
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 )
I DID ALL SUCH THINGS BUT NOTHING GO RIGHT 4 ME IS THERE ANY OTHER SOLUTION ,I READ ABOUT FLASHTOOL IN FORUM CAN U PLZ EXPLAIN IF BY THIS I CAN DO SOMTHING BUT PLZ EXPLAIN IN DETAIL
I had the same issue it restarts by itself n go into looping, remove the battery place it back, connect ur phone to SEUS by holding back button and plugging the USB
xperia mini10
in mini 10 battery is not removable & my basic operating files are deleted show when there is no operating file how it'll starts a home screen thats y i m asking u and other frend's is there any other method to re install operating 2.1 or any thing to start my phone again so i can do after that any thins otherwise nothing is worth 4 me saddddddddddddd
If your recovery (xrecovery or clockwordmod) works fine, what about removing your SD and plug it to a PC in order to copy a 2.1 ROM and then install it through recovery?
please ell me
plz tell me in which folder i'll put that files , basically allready tried all even my update zip is also there how to do and wht 2 do plz explain is there any method to recover from sdcard or through any other software
is there xrecovery file work from pc do u have exe file so plz sen me
[email protected]
is there any method to format c drive of phone bcs when ever i'm trying
through pc companion it'll tell in last stage to use usb storage but y phone is not starting so how could i do this nothing work 4 me plzzzzzzzzzzz any one give me solution I'm very depress my phone is even not going to switch off it'll starts again & again until battery drained
i deleted my three files from c/: x recovery.tar, con. & busy box
saurabh12311 said:
when ever i'm trying through pc companion it'll tell in last stage to use usb storage but y phone is not starting
Click to expand...
Click to collapse
That's weird because 7 hours after i brought my X10 mini pro i already bricked it , so i fire up SE PC companion and i followed the instruction to _repair_ the phone and no access to USB storage was needed that i remember.
It simply downloads and flash to your phone.
Unfortunately i'm still a newbie so i suppose and i haven't all the right answers
Keep trying with SE repairing and good luck with that!
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
thanks dear but finally my phone is ded I sent my phone to customer center but after checking they told me no hope phone will not recoverd..........
half knowledge is always dangerous is true for me I lost my money
There is no way that seus could not fix your phone and even if it couldnt se has a duty to repair it free of charge in the first 12 months !
Sent from my U20i using XDA Premium App
SEUS wont fail!
galvic said:
SEUS wont fail!
Click to expand...
Click to collapse
Quote that and DON'T THROW IT AWAY. USE flashtool. I got mine bricked and that was a great solution.
If you still have it i'm gonna show you a guide to flashtool
So this is my friends phone, he received a notification that there was a newer android version available and if he wanted to update. I had advised him not to update this this way (OTA?), but he couldn't resist.
It had stock 2.3.3, and it was unlocked following Alejandrissimo's method (http://forum.xda-developers.com/showthread.php?t=1254416)
Now it does not boot up, nothing happens if you press the on/off button
What do you advise me to do?
If possible I would like to put S.E.Tweaked rom v 0.7 and Inteks kernel v15 inside
So far I found this, should I follow first or second guide? Any other ideas?
1 Fota unbrick
by testadeferro
http://forum.xda-developers.com/showthread.php?t=1324707
http://www.techofweb.com/technology/recovering-bricked-xperia-flashtool.html
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
There´s not much to explain, this .sin and ftf files repair the damage bootloader and the trim area.
If you ´re unable to start phone after a fota update with unlocked bootloader.
Just plug the phone and connect it pressing back button in your xperia neo and press flash on the flashtool. And voila you have you phone live again.
2 [How-to] Repair Damaged Bootloader + Trim Area [Red Led][Unknown Device]
by Alejandrissimo
http://forum.xda-developers.com/showthread.php?t=1254409
Sometimes we can brick our devices by a bad unlock, flashing process, or simply bad luck.
The phone doesn't turn on and there is a Red Led Of Death when pressing power button. Even with a GREEN led when we plug the phone with back key pressed the computer detect the phone as "unknown device" so there is no chance to get fixed by Flashtool or SEUS/PC Companion.
Well this problem normally means that the bootloader is broken or damaged. So, in order to fix it we need to write a new SEMCboot and after this we were able to flash a full and fresh firmware with flashtool and unbrick our Xperia.
This process like unlocking process requires SETool dongle/box and a paperclip to make a testpoint to put the phone in flash mode and be able to write the SEMCBoot.
I can help to anyone with a bricked Xperia Arc/Play/Neo/Pro just make send me a PM.
Ok Alejandrissimo pm'd me this:
http://forum.xda-developers.com/showthread.php?t=1126358
Thanx mate!
[Tutorial] Fix FOTA bricked (unlocked bootloader) Phones
This will fix your unlocked Phones which got bricked through OTA update and are dead now!
Please download this package:
http://www.multiupload.com/Q103V01CV1
Let it extract to a destination of your choice.
After that run Flashtool.exe.
Now hit the button FLASH and select the package which is included.
Follow the steps and connect your phone in flashmode. This is the same mode Pc Companion and SEUS uses to flash your phone to newer firmare (Indicated by green LED), if you got BLUE LED you are in the wrong mode!
Flashtool will now detect your phone and start the repair.
After all is done your phone should be up and running again.
ADVICE:
PLEASE DO NOT ACCEPT ANY OTA'S ! If you receive a OTA message just decline, if you accept it you will end with a brick AGAIN! So please do NOT accept them until SonyEricsson provides a OTA solution for unlocked Bootloaders!
Best Regards
Team FreeXperia
Last edited by FXP; 16th June 2011 at 08:23 PM.
i use the tool (only the loader.sin) and it's great but i have a question.
now the version is 2.3.2 and i want 2.3.4 how can i resolve this one ?
Update it.
Sent from my LT15i using XDA Premium
Thanks, it helped me to unbrick my Neo! Now I have CyanogenMOD installed, it works great!
electrash said:
Update it.
Sent from my LT15i using XDA Premium
Click to expand...
Click to collapse
With Pc Companion i brick the phone again so i use wotan
Now it's back and beautiful
My xperia neo bricked because of OTA.. and revive using this guide,
thank you very much
please help.. i rooted my phone. and for a moment it was working fine. and sudddenly it has problems with start up it goes on a loop.. need i flash it? how?
thx, saved me
Please reupload
Hi, I have the same problem. Can anybody upload this package? Please.
EDIT: (SOLVED) Sorry, I found another working link in first post.
You are a savior!!!
devrruti said:
So this is my friends phone, he received a notification that there was a newer android version available and if he wanted to update. I had advised him not to update this this way (OTA?), but he couldn't resist.
It had stock 2.3.3, and it was unlocked following Alejandrissimo's method (http://forum.xda-developers.com/showthread.php?t=1254416)
Now it does not boot up, nothing happens if you press the on/off button
What do you advise me to do?
If possible I would like to put S.E.Tweaked rom v 0.7 and Inteks kernel v15 inside
So far I found this, should I follow first or second guide? Any other ideas?
1 Fota unbrick
by testadeferro
http://forum.xda-developers.com/showthread.php?t=1324707
http://www.techofweb.com/technology/recovering-bricked-xperia-flashtool.html
Here is something to repair your bootloader after a FOTA update and phone iIn the package you have flash tool and the files you need.
Just unzip to a folder and then use flash tools.
The needed files are in the right folders.
After this you should have your phone fully back for a fresh rom install.
Use wotanserver to flash a full custom rom of your choice.
http://www.mediafire.com/?h2dwrz18mujx765
There´s not much to explain, this .sin and ftf files repair the damage bootloader and the trim area.
If you ´re unable to start phone after a fota update with unlocked bootloader.
Just plug the phone and connect it pressing back button in your xperia neo and press flash on the flashtool. And voila you have you phone live again.
2 [How-to] Repair Damaged Bootloader + Trim Area [Red Led][Unknown Device]
by Alejandrissimo
http://forum.xda-developers.com/showthread.php?t=1254409
Sometimes we can brick our devices by a bad unlock, flashing process, or simply bad luck.
The phone doesn't turn on and there is a Red Led Of Death when pressing power button. Even with a GREEN led when we plug the phone with back key pressed the computer detect the phone as "unknown device" so there is no chance to get fixed by Flashtool or SEUS/PC Companion.
Well this problem normally means that the bootloader is broken or damaged. So, in order to fix it we need to write a new SEMCboot and after this we were able to flash a full and fresh firmware with flashtool and unbrick our Xperia.
This process like unlocking process requires SETool dongle/box and a paperclip to make a testpoint to put the phone in flash mode and be able to write the SEMCBoot.
I can help to anyone with a bricked Xperia Arc/Play/Neo/Pro just make send me a PM.
Click to expand...
Click to collapse
I spent three days without my Xperia Neo, I thought there was no solution.
The green LED blinked, did not carry the wall charger, neither FlashTool, CWM worked ...
All this after OTA update from .42 (never more)
You saved my phone!
Thank you!
Bricked my xperia neo
Hi friend,
Can u pls send me another link to download following flash tool? The link given in the post does not download the tool so pls give me another link. I have bricked my phone while flashing it with a custom rom and now phone got stuck on Sony logo. When I connect it to the PC while pressing the back button, the green light turns on and the PC does not recognize the phone. Pls send me the link or suggest any other method of fixing it. Would be highly thankful to you for this help.
devrruti said:
Ok Alejandrissimo pm'd me this:
http://forum.xda-developers.com/showthread.php?t=1126358
Thanx mate!
[Tutorial] Fix FOTA bricked (unlocked bootloader) Phones
This will fix your unlocked Phones which got bricked through OTA update and are dead now!
Please download this package:
http://www.multiupload.com/Q103V01CV1
Let it extract to a destination of your choice.
After that run Flashtool.exe.
Now hit the button FLASH and select the package which is included.
Follow the steps and connect your phone in flashmode. This is the same mode Pc Companion and SEUS uses to flash your phone to newer firmare (Indicated by green LED), if you got BLUE LED you are in the wrong mode!
Flashtool will now detect your phone and start the repair.
After all is done your phone should be up and running again.
ADVICE:
PLEASE DO NOT ACCEPT ANY OTA'S ! If you receive a OTA message just decline, if you accept it you will end with a brick AGAIN! So please do NOT accept them until SonyEricsson provides a OTA solution for unlocked Bootloaders!
Best Regards
Team FreeXperia
Last edited by FXP; 16th June 2011 at 08:23 PM.
Click to expand...
Click to collapse
usmansaeed said:
Hi friend,
Can u pls send me another link to download following flash tool? The link given in the post does not download the tool so pls give me another link. I have bricked my phone while flashing it with a custom rom and now phone got stuck on Sony logo. When I connect it to the PC while pressing the back button, the green light turns on and the PC does not recognize the phone. Pls send me the link or suggest any other method of fixing it. Would be highly thankful to you for this help.
Click to expand...
Click to collapse
What rom were you trying to install? And did you install drivers for flashtool?
Sent from my Xperia Neo V using Tapatalk 2
thanks
Attitude.SSJ said:
What rom were you trying to install? And did you install drivers for flashtool?
Sent from my Xperia Neo V using Tapatalk 2
Click to expand...
Click to collapse
Thanks my friend for the interest. I was trying to install Jelly Dream rom. But I have fixed my phone. Actually the problem was with Windows 8, I tried the flash tool with Windows 7 & it did work & my phone is fully functional now. Thanks again for ur interest.
Can u pls tell me what is the most suitable & fast rom for this phone? I also want to integrate sd card to internal memory and use a portion of sd card as ram, is this possible?
usmansaeed said:
Thanks my friend for the interest. I was trying to install Jelly Dream rom. But I have fixed my phone. Actually the problem was with Windows 8, I tried the flash tool with Windows 7 & it did work & my phone is fully functional now. Thanks again for ur interest.
Can u pls tell me what is the most suitable & fast rom for this phone? I also want to integrate sd card to internal memory and use a portion of sd card as ram, is this possible?
Click to expand...
Click to collapse
Every rom is suitable and fast depending on user as to what he s happy with.. There can be no suggestions on this.
Integrate sd card to internal memory yes it is possible. Partition ur sd card to ur desired size in ext2/3/4 or fat32 format and use cronmods script. Google it. You'll find easily.
Integrate portion of sd card to ram yes thats possible too. Its known as swap partition. Use ram expander app from playstore. Keep in mind virtual ram is 10x slower than actual ram. Google it for more info.
Sent from my Xperia Neo V using Tapatalk 2
I did install Bin4ry's root for my xperia u yesterday. after the install my phone has began to not charge. and wifi is not working. i tried to unroot it. connect phone to pc and unroot. it said unrooted. but problems are not solved. İ cant open my phone now. What can i do ? when i tried to charge it. it looks between %0 - %10 but not charging... and closing the phone again..
ufukadiguzel said:
I did install Bin4ry's root for my xperia u yesterday. after the install my phone has began to not charge. and wifi is not working. i tried to unroot it. connect phone to pc and unroot. it said unrooted. but problems are not solved. İ cant open my phone now. What can i do ? when i tried to charge it. it looks between %0 - %10 but not charging... and closing the phone again..
Click to expand...
Click to collapse
I think that installing stock ROM the problem will be solved. You know how to do that?
DaRk-L0rD said:
I think that installing stock ROM the problem will be solved. You know how to do that?
Click to expand...
Click to collapse
no i dont :S can u tell me how can i do that ?
someone said ''Flash stock ftf using flashtool''. but i dont know how to do that.. and is this method safe ? someone in forum says ''my xperia bricked.. '' if i do this method, Is my xperia can get bricked too ?
prerequisites 1.
latest flashtool
https://hotfile.com/dl/179504132/bc8dd41/flashtool-0.9.9.0-
windows.exe.html
2. Xperia u ics ftf
http://d-h.st/u0k
3. windows pc or laptop ( I use win
8 ) in xp u may need to have pc companion
and other phone drivers installed 4. patience
nd a working brain download both the things
1. after downloading of flashtool install it in c
drive of ur pc 2. the zip file of firmware is in
zip format extract it using winrar or winzip at
a known location u will see that u now have a
ftf file worth 620mb approx 3. copy that file
and and paste it in c\flashtool\ firmwares
( delete everything rest from that firmware
folder... it should have only ur pasted ftf file)
4. go to c/flashtool/drivers and install drivers
for xperia u 5. now here comes the main part
switch off ur phone and let it b disconnected
from pc 6. click on flashtool click on thunder
icon click on flashmode select The ftf file ( it
will show vodafone name bt dun worry it is
unlocked) click on exclude TA ( if it is present)
and click on NO FINAL VERIFICATION ( always
present) 7. click on start/flash flashtool will
show preparing files flashtool will now ask u to
connect ur phone 8. keep the phone off press
the volume down button ( keep it pressed, dun
leave it) and connect it to the usb 9. u will see
green led bar on ur xperia u when it is
connected to usb and process of flashing will
start once start u can leave the volume down
button 10. let it complete to 100% flashtool
will now show " please disconnect and start ur
device " just disconnect it and start
i have bought my phone a month ago.. does it void warranty ?
and it is stock ftf right ? i mean, it is gonna be like the first time that i take the phone on my hand
and some was saying exclude baseband for st25i.. my phone is st25i... should i do that too ? and when i am done with it, will my phone model seem st25a ? if you can answer this questions, i would be grateful thanks a lot already
Link i gave u
U dun need to exclude baseband as it is for st25i
Warranty remains ( not sure )
Sent from my GT-N7000 using Tapatalk 2
does its model seem st25a ?
It says st25i
I m using it
Sent from my GT-N7000 using Tapatalk 2
i live in turkey my versiyonu is 6.1.1.b.10 can i find this? it shoul be for turkey. if you have, can you upload it. if you dort have, where can i get it?
by the way i flashed my phone it works fine except language and time. so i need 6.1,1.b.10 for turkey
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
NSatya said:
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
Even sony can't help you how can we help you ?
Through sony support center i had upated the OS. In fact my phone was having latest version of OS than what I had installed through Sony.
NSatya said:
My mobile Sony Xperia Neo L is not getting switched on. It got turned off on its own. My mobile was under the below explained situation before it stopped working.
1. I was getting alerts saying - LOW PHONE MEMORY IS AVAILABLE delete some data. It had 43 MB left in phone memory.
2. Memory card was also full the day before.
3. I was not able to install any applications.
4. Since I have activated the auto update for few applications like Whatsapp, google maps etc. For them also i used to get alerts saying - INSUFFICIENT STORAGE IS AVAIALABLE TO UPDATE the software.
5. I always keep Wi-Fi on in my mobile. (If any open Wi-Fi is available mobile will get updates)
6. Battery was more than 30% charged.
All of the above may be the reasons for software problem.
No time in the past phusical harm happened to the phone, Since i bought in 2012 August.
I had gone through Sony Support Center to repair, but still it didnt worked.
Could any one help me to solve the problem ?
Click to expand...
Click to collapse
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
AW: [Q] Sony Xperia Neo L not getting switched on
NSatya said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
Thanks for your reply, could you please provide the steps to do what you said..
If u from india then u can call me I can fix ur problem. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
motorazrv3 said:
If led turns green than install flash tool to your PC, download latest ftf file for your phone and flash the ftf to your phone. But flash not whole rom parts, only flash kernel within that ftf.
Gesendet von meinem Galaxy Nexus mit Tapatalk 2
Click to expand...
Click to collapse
and why should he flash only kernel??
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
NSatya said:
Kindly provide the giudance, I am not in India now.. Explain the steps how to do..
Click to expand...
Click to collapse
it doesn't matters where you are... Download flashtool... Install it... Then you need a firmware file for your phone... Go to http://forum.xda-developers.com/showthread.php?t=2047914.. Download whichever firmware file you want... .587 is recommended... If you want you can have .631 also... after downloading the .ftf file, place it in firmwares folder of the flashtool installed folder... open flashtool.. Click on lightning icon.. It will ask 'flashmode' or 'fastboot'.. select flashmode... Then select the .ftf which you placed now.. Uncheck 'no final verification' option... Then connect your phone to the PC by holding the back button on ur phone... After the flashing is finished, switch on your phone... its done..
cherry676 said:
One last try you can give... Connect your phone to the charger and check if the led turns on.. Or else connect USB to the phone... While plugging it to the computer, hold the back button.... Check for the led light to turn GREEN... If this happens, then nothing wrong has happened to your phone.. Else no one can help you... PM me for further help..
Click to expand...
Click to collapse
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
ghennn said:
I have the same situation here and i tried the above but the green led light is not turning on. Does it mean there is something wrong with my phone? I do need help with this asap. Thank you in advance!
Click to expand...
Click to collapse
Switch off the phone.. Hold the "back" button and connect your phone to computer.. The LED should turn GREEN... It means that computer is recognising your phone.. Otherwise there might b some problem in the drivers or in the phone.. I cannot help you unless you can explain what you did before your phone entered into such state...
sony Xeperia neo L Mt 251 not turning on
sumitverma1 said:
If u from india then u can call me I can fix ur problem 9437256037. Just dwnld flashtool and firmware of neo l then flash it
Sent from my MT25i using xda premium
Click to expand...
Click to collapse
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
svahmeds said:
I have done as you said, LED light turned green... If there is no problem, y it is not getting switch on ?
I really appreciate your response.
Click to expand...
Click to collapse
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
i can't turn on my cell sony xeperia neo L mt251
cherry676 said:
If LED is turning on, then its a good news that your phone is not dead. If nothing is getting displayed on the screen, then you might have fried up the internal circuitry. I have ended up with it. It cost me 25% of mobile's cost to get it repaired again.
Click to expand...
Click to collapse
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
svahmeds said:
Hello
I can't turn my cell phone Sony Xeperia neo L MT251 please some on can help me
Click to expand...
Click to collapse
Flash a new ftf file. There is a guide for it. Phillip Wu's thread has all the steps. Go through the steps about flashing new stock firmware.
Xperia Neo L bricked ....
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
mohans26 said:
Hi All,
I think i have bricked my xperia neo l to a pretty bad shape.....Please help me ...
1)I rooted the phone sucessfully with the kit developed by DoomsLord
2)I installed the cwm recovery, took backup.
3)I did not flash the kernel but went ahead with the ICS revolution ROM Xperia NEO L:crying:
4)Installation of ICS went fine but the phone was stuck in the boot mode. Sony screen used to come and device used to boot......
Here is the stupid part..
5) I tried to go to recovery it didn`t work.. I thought maybe the kernel is a problem..I used the ICS kernel and flashed it.
Nothing works now...When i connect my cell to the laptop windows says device not recognized..I am trying to go to flashboot mode not working...Is there a way to fix it ? If yes please provide me any pointers...
Click to expand...
Click to collapse
Dear friend.....
First,charge ur device at least 2hours....
When u charge ur phone,try to read carefully every step how install the custom rom u want....
After that...
-Flash full firmware via flashtool (flashmode)
Let ur phone on first...
And after ur phone works,its up to u maybe u want to continue another step to install custom rom u want....
But dont forget to flash the custom kernel recommended by the dev first before u do another step....
(flash custom kernel via fastboot)...
Hope it help and good luck.....
Sent from my MT25i using xda app-developers app
well..
Thanks for the advice ..But Windows is not recognizing the phone..When i try to flash and go into flash mode ..Pressing the back button and connecting..The flash tool says device not connected
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
please explain
Zahovay said:
Idk about your phone, but 'til you are waitinh search for your phone/ download mode. Check if you have this. It solved my problem like yours
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
can you please explain it, step by step,
because im a newbie, i just studied this rooting and custom ROM things in two days
i think its not enuf huh.
thanks for the suggestion
Download mode can be achieved by first
power off your device
Try a combo of power and one of the volume buttons
When the buttons light up keep holding till you see a yellow triangle
From there plug into your PC
Then attempt to "flash" back to a working ROM with your PC
For my device(s) download mode is found by using the #1 button on the hard keyboard and the power button at the same time (epic 4G) and for my (my touch 3G) other device it can be found by pressing volume up and the power button.
For your device try the following Google search, just replace the bit between the "<>" with the name of your device and it should pull up a solution by page two of the Google search
"how to"+"download mode"+<name-of-device> similar:XDA
oh and the issue you're having is called a "boot loop" and is usually fixable by going back to stock and re-rooting after.
Sent from either my SPH-D700 or myTouch3Gs
Debian Kit/QEMU Linux Install guide for all android devices that I'm writing:
http://forum.xda-developers.com/showthread.php?t=2240397
Now have working Installers for ARM Java 7 JDK + Maptools + jMonkey
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
s-X-s said:
what the above poster saying is applicable to samsung phone... no yellow warning sign on sony phone.... what we call is flash mode.. power button+volume down.. but as ur xperia is older model it could be a power+back button... check whether ur phone is compatible with flash tool by Androxyde and Bin4ry... search and you need ur phones firmware as ftf format....
Click to expand...
Click to collapse
sad to say but it does not boot to recovery or anything,
it just shows the sony logo over and over again
i downloaded the flashtool, already in my pc
currently downloading the ftf files- i guess this is the "stock" build, or ROM
a while ago i tried it with the flashtool but
the flashtool says device disconected everytime the SONY logo disappears
is there any possibility that my phone will be back?
thank you
AND another thing!!
i installed the CWM with my BootLoader Locked
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
s-X-s said:
Next time post in your device section and if its a question in Q &A section...
http://forum.xda-developers.com/forumdisplay.php?f=1276
its appears to be a soft brick.... i havent seen/used Xperia Neo b4.. just looked @ pic.. i think 4 ur device it will be power +back button for flash mode and soft reset.... check ur device forum for more details... if i'm correct... press and hold power button +back button until u get one vibrate and let go.. then flash the ftf using flash tool.. usually ftf file are of stock firmware
Click to expand...
Click to collapse
thank you, but sadly again it doesnt boot
i guess i lost my ROM and drivers
PC companion cant even detenct my device, even the flashtool too.
it just charging when i connect it to my PC
and has this battery image with a single blue bar, no animation whatsoever
do you recommend sending it to the SONY service centers??
i did this things only this time because the one year warranty already expired
thank you again, for your help
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
emperorrafael said:
just a theory
i think my problem here is that, i lost my ROM together with the usb driver
because even flashtool cant detect/read it.
Click to expand...
Click to collapse
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
ameyk85 said:
Hi, Do not panic. I faced a similar problem today, and the best solution for it is using FLASHTOOL to flash the stock .ftf firmware.
From the sticky threads, download the stock ICS firmware for the phone. Also read up on how to use the flashtool.
Try and follow the solution given in the below thread, hit THANKS if it helps!
http://forum.xda-developers.com/showthread.php?t=2402421
Click to expand...
Click to collapse
thank you for your guide, but i decided to go ahead and restore my phone completely using sony software updater
and i will root my phone again, and start from scratch
just a bit scared, but
lessons are learned when you commit mistakes, no?
thankyou again and
be safe
emperorrafael said:
Greetings!!!!
http://forum.xda-developers.com/showthread.php?t=2265805
i think i just ruined my phone
i made a huge mistake, i have mistakenly installed the zip file provided by the good man above on the link
the first instruction was to FLASH KERNEL PROVIDED FROM ZIP
and i INSTALLED it USING CWM
i guess FLASH and INSTALL does not mean the same thing. i am sorry, i am a newbie
please help me fix my phone
i am stuck at the SONY logo, it keeps flashing and flashing it
i connected it to my PC to attempt repair using PC Companion, my PC did not detect anything
I am trying to boot to recovery, but i do not know the keys to press
i searched for it but, nothing works for me
PLEASE HELP ME
PLEASE
I have a sony ericsson xperia neo v mt11i
i have successfully rooted it
i have also successfuly installed the Clockworkmod
Click to expand...
Click to collapse
i just want you all to know that my xperia neo v is now fixed
i used the SONY SOFTWARE UPDATER
it restored my phone to stock ICS4.0.5 and Build 4.1.B.597
i am very happy now that i revived my phnoe
TO ALL THE PEOPLE HERE THAT GAVE THEIR PRECIOUS TIMES JUST TO HELP ME,
I KNOW THAT I CAN ONLY THANK YOU FOR THIS.
BUT I AM REALLY GRATEFUL THAT THERE ARE STILL PERSONS AS GOOD AS YOU ALL ARE
i will dedicate my spare times reading forums,threads, learning how to PROPERLY install
custom ROMS
so that i can also help the others in need[superhero!!!]
THANK YOU ALL AGAIN
and BE SAFE