SDMergE400 Mod (gellmaR & cRaZyByte) - Get 1.1GB Space for your apps and data!
Link2SD no longer required!
Taken from http://www.modaco.com/topic/361722-...zybyte-get-11gb-space-for-your-apps-and-data/
gellmar said:
The purpose of SDMergE400 mod is to get more space for user data by means of removing the unnecessary 1GB internal SDCARD. Technicaly it is done in 4 steps:
Step 1 - Update recovery to use custtom one that support expert partitioning
Step 2 - Re-partition the internal storage and create filesystems
Step 3 - Install fresh Cyanogenmod 9 nightly
Step 4 - Install SDMergE400 modifier for CM9 nightly.
Main features:
1. Extended data partition 1.15 GB
2. Battery / power up fix
3. USB Mass Storage fix
4. ICS device encryption fix
5. 1GHz / tun / swap kernel
How to install (for the first time - no previous SDMergE400 mod installed):
1. Download archive with all parts from http://sendfile.su/787227 [SEE BOTTOM OF POST FOR MIRRORS] and unpack its contents to External SD card. Download the latest CM nightly to your external SD card too. Make sure the phone is fully charged!
2. Ensure you have CWM 5.8.4.5 recovery installed.
3. Plug off the charger and reboot into recovery
4. Apply SDMergE400_Step1.zip from sdcard. The phone will reboot on success prompting you a new recovery.
5. Apply SDMergE400_Step2.zip from sdcard. The phone will reboot on success prompting you an old recovery for step3 and step4 completion.
6. Apply CM9 install and after it completes, apply SDMergE400_Step4.zip from the sdcard.
7. Reboot and cross your fingers - after 2-3 minutes max you will see the SIM card PIN lock screen.
How to apply newer CM nightlies:
1. Copy CM9 nightly to external card
2. Apply from CWM recovery
3. Apply SDMergE400-Step4.zip from external card
4. Reboot normal
All you user data should remain intact.
How to revert the mod:
1. Reflash KDZ to stock 2.3.6 kernel.
Credits:
Thanks go to
- crazybyte for long-time help, discussions and scripts
- hecatae for pinned topic and testing of previous mods
- LG RMA service for new board for my E-400
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click to expand...
Click to collapse
Step4 has been updated! You must download the new step4 and ignore the old one!
Fixes in the new step4:
gellmar said:
1. Overclocked 1GHz kernel / blur fix / NO SMARTASSV2 (improved stability against freezes and reboots!) / swap / tun.ko as module / ums fix
2. PPTP / L2TP VPN fix
3. WebKit checkboxes fix
4. Lock screen fixes : glowpad with 6 targets, optimized pinpad and password lock, carrier info under clock widget, weather and calendar widgets located under glowpad to save space.
5. USB mass storage write speed fix (3-4 MB/sec)
6. White screen charger fix
7. New charger icons
8. New recovery with USB mass storage fix
SDMergE400_step4v1.3: http://sendfile.su/805289
SDMergE400_step4v1.3b (big lockscreen circle): link dead: see bottom of post for mirror
Click to expand...
Click to collapse
Screenshots:
Big lockscreen circle version:
Notes:
Will wipe everything on first install.
CM9 is required.
FOR STOCK VERSION GO HERE: http://forum.xda-developers.com/showthread.php?t=2250759
For the fixes and kernel without merged memory go here: http://forum.xda-developers.com/showthread.php?p=39806257#post39806257
SDMergE400_mod_gellmar_crazybyte.zip without old step4 mirror: http://www18.zippyshare.com/v/36858550/file.html
SDMergE400_step4v1.3 mirror: http://www18.zippyshare.com/v/4850968/file.html
SDMergE400_step4v1.3b (big lockscreen circle) mirror: http://www18.zippyshare.com/v/20520892/file.html
*deleted*
thank you...
thanks Gellmar n Crazzybyte... :good:
Thanks your very very much Crazzybyte and Gellmar. Now I have plenty of storage and and dont have to worriey about using l2d
My L3 when i connect him to PC doesnt do nothing.. i dont have USB icon or smth.
When I follow the steps to flash the newest nightly. All my apps,data,gapps are still there. But for some reason the overclocked kernal is not. I guess i have to re flash it. Also has anyone notice that in the about cm update, it does not always display the current version of the cm version your using. Im using 20130407... the phone displays 20130313. Overall all im happy with the mod and has saved me time (no need to re download apps/can change settings when flashing to latest cm) and a lot frustration from not having enough space to install apps.
FlowUK said:
Also has anyone notice that in the about cm update, it does not always display the current version of the cm version your using. Im using 20130407... the phone displays 20130313.
Click to expand...
Click to collapse
Yes, that's from the overclocked kernel. I contacted the author, maybe he'll remove/fix this.
Edit: No, it's step4 I think, not the kernel.
Wating For The Lockscreen Fix
Sent from my LG-E400 using xda premium
step 2! Status 7. ERROR¸
LisekDH said:
My L3 when i connect him to PC doesnt do nothing.. i dont have USB icon or smth.
Click to expand...
Click to collapse
yeah me too..
If it doesn't do anything, just charges, go into settings, storage, click the menu button to show the USB settings menu and choose MTP/PTP/USB storage.
When I use Ram Expander to swap your phone is very very lag and delay. Who can help me?
Sent from my LG-E400 using xda app-developers app
Update with VPN, lockscreen and checkbox fixes coming today!
OP has been updated with a new version of step4!
The new version has fixes for the lockscreen, checkboxes and VPN. Unfortunately it's without smartassV2 governor due to crashes.
Download and flash it now!
Possible fixes in the next version: wifi tethering, skype video calling, green camera bug... All hail to the mighty Russian, gellmar!
can u make the same for stock roms plz?
Can anyone make a flashable zip just for the lockscreen fix
Sent By My 2 Bare Hands
ill do it dude avana..
Sent from my LG-E400 using xda premium
emokeizer said:
ill do it dude avana..
Sent from my LG-E400 using xda premium
Click to expand...
Click to collapse
Thanks Will Be Waiting For It....
Sent By My 2 Bare Hands
Hey dude! this is your fixed lock screen and I have centered the clock also...
Download:View attachment update_lockscreenCWM.zip
annoying lock screen vibrations..REMOVED..
New version of SDMergE400_step4:
SDMergE400_step4v1.3: http://sendfile.su/805289
SDMergE400_step4v1.3b (big lockscreen circle): http://sendfile.su/805296
changelog:
- USB mass storage write speed fix (3-4 MB/sec)
- White screen charger fix
- New charger icons
- New recovery with USB mass storage fix
Related
Page Last Updated: 06/11/11
Hello again everybody!
This is a Hybrid rom Based off of my Ideos S7 Froyo v1.2.1 /system/ with...
the /system/framework/ & /system/app/ of the S7 Slim firmware.
Everything works for me, others mileage may vary.
Also again, thank tri_zet for providing the firmware & check out his rom as well!
I'm not responsible for whatever happens to you
or your phone when you flash this...
Features:
- Apps2SD & No Apps2sd
- Rooted
- Framework-MOD
- Themed Launcher
- Fly-in Animations
- DSP Manager
- Default English Language
- Stable
- Task killer tweak for speed
- VM Heap 32mb (testing, let me know if you have problems)
Add-ons:
HWime.apk - Huawei Stock Keyboard
Button Savior (Software keys) d/l from market
Original Framework/Remove MTN Shutdown
Xoom Bootanimation - Flash with CWM
Honeycomb Wallpaper Pack - d/l from market
-------------------------
06/11/11
Framework-Mod! - MORE BLUE! - THEMED LAUNCHER!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(zxhian & joenilan mixed framework-mod)
- Honeycomb Icons
- Launcher Themed
- New Font (Comfortaa)
let me know if you see something missing!
-------------------------
Screenshots:
------------------------------------------------------------
Current
FroyoFusion Release 2 - Apps2sd
FroyoFusion Release 2 - No Apps2sd
------------------------------------------------------------
Old Versions
FroyoFusion - Apps2sd - Re-Released so re-download!
FroyoFusion - No Apps2sd
------------------------------------------------------------
Installation Instructions:
Flash First! ONLY IF YOU'RE ON 2.1 ECLAIR
Located here: Froyo Android 2.2.2 Indonesian Updata
then you flash this!
New Recovery: CWM 2.5.1.8 by goodoane
--------------
1. Copy FroyoFusion.zip to INTERNAL sd card
2. Wipe/Data Factory Reset
3. flash with Clockworkmod
ROM REBOOTS AFTER FIRST BOOT
Apps2sd Instructions
- Ext Partition MUST be on the internal SD card formatted as ext2 as a primary partition after your fat32 partition. Use easeus partition manager.
- Note: It's reported that reflashing this rom over it's self after installing apps frees up more space, so if your data partition is getting filled, reflash this without wiping and you should have a lot more space free, some apps may force close, just re-install them
- Some apps & games like Angry Birds or Pocket Legends install to the sd card right from the market,
this bypasses the roms a2sd and uses froyo's which we all know eventually fills up space.
So what you have to do is:
Menu>Settings>Applications>Manage Applications>SD card
Move all listed back to tablet. Reboot.
------------------------------------------------------------
Not Working/Bugs:
Skype outgoing call turns off speaker, still works with headphones though.
Soon to come:
not sure...
------------------------------------------------------------
Changelog
06/06/11
- Xoom Bootanimation
- Ideos Shutdown (Removed MTN Shutdown thanks zxhian)
- zxhian's framemod (a dirty port from my 1.2.1, some graphic glitches, nothing bad)
- 3d Gallery (original still included)
- Removed:
****- EmotionVideoWidget
****- EmotionClockWidget (not weather)
****- EmotionBookmarksWidget
- Added Disk Usage Analyzer
- Added Darktremor's A2SDGui (good for a2sd - Not Included in no_a2sd)
- Added Gingerbread Keyboard (original still included)
- Optipng'd the Launcher.apk so far (i'll optimize other things soon! Still huge 19mb though)
05/27/11
- Apps2sd & No Apps2sd Versions
- Re-Release
- DSP Manager
- Task Killer Tweak
- Pretty much stock
- Removed Gmail, Youtube, Maps, Facebook, Twitter, Street Maps
- Fly-in Animations
- Dalvik VM Heap - 32mb (Testing, let me know of any problems)
------------------------------------------------------------
This is really awesome. Thanks for this.
It works fast and fine.
After the first installation I had a strange faillure: Whatever app I installed, it DID install, but the Tablet rebooted immediately after.
I then installed again without wipe and all is OK now!
Thanks for another good work!
Where did u get the wallpaper ?
macfreaker said:
Where did u get the wallpaper ?
Click to expand...
Click to collapse
comes with the stock launcher
Looks amazing! I was waiting for a nice semi-stock looking rom. Will try it out later today.
Your download link for the App2SD version is broken. Here's the working one from androidtablets:
http://adf.ly/1esbm
rkarsk said:
Looks amazing! I was waiting for a nice semi-stock looking rom. Will try it out later today.
Your download link for the App2SD version is broken. Here's the working one from androidtablets:
http://adf.ly/1esbm
Click to expand...
Click to collapse
thanks for that, i fixed everything in first post now.
some add-ons too
This will work on ideos s7 dual camera bestbuy verison right?
How do i get the Huawei keyboard installed?
yes will work on bestbuy version, and installing the keyboard you should be able to install it by putting on your sd card use file manager locate it and install if not, try root explorer and move to /system/app
@joenilan first of all i love your roms. But i got a small problem with your new one (froyofusion R2). The battery indicator in the status bar stucks while charging.
The battery-Status in the lockscreen works well.
Magixo said:
@joenilan first of all i love your roms. But i got a small problem with your new one (froyofusion R2). The battery indicator in the status bar stucks while charging.
The battery-Status in the lockscreen works well.
Click to expand...
Click to collapse
thanks man, download the new framework-mod from the first post, fixes that, and mostly everything else, also themed the launcher a little bit, and changed the fonts
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
robetheria said:
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
Click to expand...
Click to collapse
If you are using the Best Buy S7 then no, multi touch will not work. The resistive touch screen can not support multi touch gestures.
robetheria said:
Trizet ROM can do multitouch, it can zoom with two finger, meanwhile yours can't, can you fix that? When i use trizet ROM with data2ext capable, it's always got me stuck in some program and program close because may be because some corrupt data, when i use your a2sd it runs smooth, but can't do multitouch. May be if you fix that, your ROM will get perfect.
Click to expand...
Click to collapse
Here you go: http://forum.xda-developers.com/showpost.php?p=13839083&postcount=32
Thank you man, you're the best
aolander said:
If you are using the Best Buy S7 then no, multi touch will not work. The resistive touch screen can not support multi touch gestures.
Click to expand...
Click to collapse
I use capacitive one....
Can some one please mod the framework-res.apk for making the status bar and the font smaller like in the Samsung Galaxy tab? Thank you...
This rom is to install S7 Slim?
UMTS gone
I have installed this ROM, it's running like a charm.
But... Somewhere in the process I have lost the ability to connect to UMTS.
Only options are GSM and WDCMA.
Any method how I can get UMTS back??
Made for locked bootloader R800x. I haven't tested this on anything else
Use at own risk
This ROM is made for gaming.
(archive is 54 megabytes)
this is stripped down and geared to speed. No fancy UI. No lag causing effects.
App drawer opens and closes in 1 fraction of a second.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Banners to show your support. Feel free to use
Features:
Based on 2.3.3 R800X Stock ROM
------------------------------------------------------------------------
Code:
numerical battery bar
fast photo gallery
host file edited to block advertisements
Script manager integrated
Hard to kill launcher
Supercharger script integrated and activated to run on boot
CWM Recovery Pre-installed
All bloatware removed.
boot animation replaced
optimized for speed
optimized file size
removed camera shutter sounds, removed video shutter sound
remove lag causing elements
file manager built in
usb debug and unknown sources turned on
Install guide:
-Make sure your battery is atleast 50% for saftey reasons.
-Make sure you are rooted & have CWM Installed
- Extract Cola_X.X.X Archive File
-Place Cola_X.X.X Folder inside clockworkmod/recovery/ located on your SD card. (If the folders dont exist create them)
-Reboot phone and push down on volume button till Recovery screen comes up.
-Select - "Backup and Restore" option with volume rocker and hit HOME.
-IMPORTANT: Make a backup of your current ROM incase you want to revert later.
-Hit back to main menu of recovery and select wipe cache partition.
-select -Backup and Restore/ Restore / Cola_X.X.X then hit HOME
-Wait for the files to finishing flashing and REBOOT SYSTEM NOW option.
Click to expand...
Click to collapse
Known Bugs:
ROM breaks with factory data reset. do not perform it.
just restore nandroid if you need to clear data / restart fresh
Hope you Enjoy.
If you have any questions just ask here I will try to help.
If you have any suggestions to make ROM faster or smaller please let me know.
Future plans:
Integrate latest market into rom
Integrate other tools and spare parts
Optimize for more speed
New Version Cola6
http://www.sendspace.com/file/heowpx
second download location.
http://tinyurl.com/6uwywwf
1.0.2 changelog:
Integrated persistant supercharge script (faster multi task and such)
Integrated Script manager
Added hard to kill launcher
Removed unnecisary files for lower size
Fixed app drawer problem
Lowered archive size.
1.0.3
changelog:
added numerical %' battery bar
removed 3d photo gallery (creates lag) replace with low memory/ low size photo gallery
removed other file systems not needed
fixed few minor bugs
total archive size reduced to 56 megabytes
1.0.4 changelog:
integrated latest market.
made archive smaller (54mb)
1.0.5 changelog:
fixed google talk error that was making rom unusable.
Thanks, I feel bad for r800x owners they need more stuff.
Sent from my R800i using Tapatalk
Clienterror said:
Thanks, I feel bad for r800x owners they need more stuff.
Sent from my R800i using Tapatalk
Click to expand...
Click to collapse
You're welcome
If you have any improvements please let me know.
Please upload some pictures of this room.
And thank you
New pictures coming soon.
If you do a factory data reset you will loose super charge and hard to kill launcher properties
Also it will remove home button binding in /system/usr
If you need to reset do it from CWM not in privacy options.
Awesome! Will try this out this weekend.
TheAugust said:
Awesome! Will try this out this weekend.
Click to expand...
Click to collapse
cool! hope you like!
Can someone upload as zip instead of 7z
doua27 said:
Can someone upload as zip instead of 7z
Click to expand...
Click to collapse
I would help but I'm not at the computer right now.
Just use winrar or 7zip if your on windows
both are free
does this optimises the battery?
Hogwarts said:
I would help but I'm not at the computer right now.
Just use winrar or 7zip if your on windows
both are free
Click to expand...
Click to collapse
Thanks but I'm not at a computer too but I want to test it right now lol
Nice ROM mate, how about making the same for R800i too?
Magnumutz said:
Nice ROM mate, how about making the same for R800i too?
Click to expand...
Click to collapse
I would but I don't have a 800i to test with
sorry!
Also tomorrow I'm adding percentage battery for
Ease of use / function
Trancicted said:
does this optimises the battery?
Click to expand...
Click to collapse
Yes and no.
Ill add a script tomorrow that will improve battery life
But yes it already does because of low memory use
I have an R800i, so it won't work with mine?
Trancicted said:
I have an R800i, so it won't work with mine?
Click to expand...
Click to collapse
Well the R800x uses CDMA instead of Gsm so you wouldn't have phone service lol
other than that I don't know.
You could test for me. I'm sure the phone wont work tho. Just make a backup before you flash
Can over clock on this rom
nick4nick said:
Can over clock on this rom
Click to expand...
Click to collapse
Not yet. but I hope we can soon.
It's setup to be very fast tho. probably the fastest that it can be without overclocking.
I just added images and other new information to the first page.
Here is one I just added
The next update coming is going to integrate new market into rom
You know what would be missing in there aswell?
the T-Mobile Theming Engine >_<
Thanks for your hard work
This is new SD build of EvoHD2-ICS- CM9. RC. This Build is with latest TYTUNG HWA or SecureCrt HWA Kernel.
It supports both Haret and WM.
Credits for groundwork: SecureCRT, wis1152, tytung, ankuch, rapmv78, boonbing, the CM and Evervolv teams, and all other thousand peoples for helps.
Welcome to EvoHd2 Ice Cream Sandwich Mod
I have put alot of time to make the new V10 FINAL FIXED! I have fix all bugs in this Build! I share it with you now as its running smooth and fast for daily use!
I would appreciate a thank! Keep his thread clean.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you like it, please rate for me with stars!
I have make EvoHd2 V10 Final FIXED .This is the fastest ICS build ever for HD2 :
The new V10 is a AllinOne Build with Aroma Installer!:
You can install on NAND,NativSD,semiNativSd or normal SD card methode:
It works on CLK,Magldr,Clrcad and Harret or Windows:
What is working?
•Full HWA (Hardware Acceleration) With HWA Settings in Systemsettings you can choose any app use HWA
•Phone
•Audio
•SMS
•Data: 3G/HSDPA
•Wi-Fi (Support IEEE 802.1x/EAP authentication and Ad-Hoc Wi-Fi.)
•Bluetooth (and rSAP remote Sim for vehicle VW premium )
•GPS/AGPS
•Touchscreen
•Vibration
•Charging
•All sensors
•Wired earphone/headphone
•Data usage and data limit
•Software video codecs
•USB Mass Storage
•Camera/Camcorder/Panorama
•Barcode Scanner
•Flash Player
•WiFi Tethering (Native "Portable Wi-Fi hotspot" feature works well. You can also install wireless_tether_2_0_7.apk for more features.)
•USB Tethering (Native "USB tethering" feature works. You can also install wired_tether_1_4.apk for more features.)
•Flashlight (Use built-in Torch or install TeslaLED Flashlight -> my favorite.)
•FM Radio (Install Spirit FM, check settings -> audio -> qsd8250, and turn on BT before using Spirit FM.)
•VPN
•all other
What is not working!
----------------------------------------------------------------------------------------------------------------------------------------------------
Downloads Version 10 Final FIXED 19.10.2012
Make first a Backup.
If you use NativSD install, you can choose, CLEAN INSTALL (for exclude any ERRORs) in Aroma Installer or choose only install!
If you use Sd install,existing ICS folder will rename do ICS-OLD
You can choose TYTUNGS 3.5 Kernel or SecureCRT 3.3 Kernel
Download file:
Code:
[URL="http://zo.mu/WD2"]EvoHd2v10final-fixedx.zip.html[/URL]
[URL="http://zo.mu/WD2"]http://zo.mu/WD2[/URL]
Click to expand...
Click to collapse
Last Update
What is in update? :
Update with Aroma Installer
°This update is for Battery saving! Nand 3-5mA, Sd 4-7 mA Battery drain (testet for 7 days)
°Add android 4.2 Keboard, Camera,Music and Gmail
°Add option for installing Tytungs 3.6 Kernel
Any people have the auto reboot bug! This Update will fix it!
Any people can not turn on the WiFi in SD-Methode install! This Update will fix it!
If you have install EvoHd2 on NAND and have no "SCRIPT" installed, you can use an option DataOnExt in installer!
If you have installed any Script, like App2SD, Int2Ext etc. please Use normal Nand Install!
BatterySaverx.zip.html
http://zo.mu/WD4
Click to expand...
Click to collapse
If your battery is 100 percent loadet and switch not from red to green, use this update.ziphttps://rapidshare.com/files/4193295272/Lights.zip
If you like switch from TYTUNG to SecureCrt Kernel or from SecureCrt to TYTUNG kernel or switch from CLK to Rmnet use this ZIP it doesn´t delete anything! only switch the two things!
https://rapidshare.com/files/3329468985/kernel-switch.zip
Click to expand...
Click to collapse
I have make a Script.zip! for NAND installers! You can choose- INT2EXT+,INT2EXT4+,D2EXT+,or A2SD++
Script.zip
http://zo.mu/WCQ[/
Click to expand...
Click to collapse
If you have any problems take an new SD Card and "or" make a Full WIPE and CLEAN Install! All problems will disappear
Install:
Follow instruction in Aroma installer!
For NAND
•Please use at least 200MB system partition and at least 6MB cache partition.
•If your HD2 has bad NAND blocks, you may needthe larger partition.
For NativeSd or semi NativeSD user:
•Please refer to ksubedi's HD2 NAND Toolkit and/or mskip's guide. http://forum.xda-developers.com/showthread.php?t=1090783
•SYSTEM and Data size is not necessary, is determined by the ext4 partition that you have make on SD card!
•You can Wipe•Wipe Data/Factory Reset(in 4EXT) while doing a fresh install. (Optional: also delete /sdcard/Android folder or format your SD card if you have any strange issue.)
•Advanced -> Wipe Dalvik Cache while upgrading from an old version and wanting to retain data.
For CLK or MAGLDR users look at this http://forum.xda-developers.com/showthread.php?t=1881555orhttp://forum.xda-developers.com/showthread.php?t=1881205
For windows mobile users look at this http://forum.xda-developers.com/showthread.php?t=1881205 and follow this instruction for formart your SD card!
http://forum.xda-developers.com/showthread.php?t=1986437
For semi NativeSD download 4Ext Recovery https://rapidshare.com/files/1423820576/recovery.zip unzip file and copy "recovery" Folder to SD Card! Start your windows phone! Go to Recovery and start CLRCAD and HARRET. In 4Ext Recovery go to "Install from Sd card" choose EvoHd2v10final.zip and follow the instuction in Aroma Installer!
Install SD-Card Methode
For normal Sd install it is really easy! Do you use Windows mobile?If you use Windows,download the ROM and copy the EvoHd2v10final.zip on your Sdcard! Download Ext Recovery https://rapidshare.com/files/1423820576/recovery.zip unzip file and copy "recovery" Folder to SD Card! Start your windows phone! Go to Recovery and start CLRCAD and HARRET
Go to "install from Sd Card" choose the EvoHd2v10final.zip and start the Aroma installer!
Go to Install on SdCard methode! follow the instruction!
Reboot the Phone! Go to the Folder "ics" press CLRCAD and Harret,it take about 10 minutes and the phone restart automatical!
Than go again to "ics" press CLRCAD and Harret -and finish!
MD5: EvoHd2v10final-fixedx.zip
89D75FAF242B0EA939FEB89FA3C0DE5C
89d75faf242b0ea939feb89fa3c0de5c
For best performance, please BOOT 3 times after first run
Changelog:
•add Jelly Bean Stock Theme
•add ICS Stock Theme
•add otional Camera
•add otions in Aroma Installer
•Fixed incoming call Circle Bug
•Fixed Playstore download Bug
•Fixed EvoHd2 Settings / Startup tweaks
•Fixed APN Bug
•Fixed Flashplayer Bug
•Fixed Camera photo green Bug
•Fixed rSap in Nand install Bug
•Fixed CHinese language
For working Flashplayer!
Please look
Press the X in the red Circle
What your opinion about this? Please give feedback for other people in this Thread! Press THANK botton if you have test it
thank you sir for another nexus build
thanks for your work
Im not getting any network, i cant call or sms.
bigx86 said:
Im not getting any network, i cant call or sms.
Click to expand...
Click to collapse
Did you rebooted 2 times?
Happy to see new sd-dev here.
Im not getting any network
im reboot 2 time but nothing
i've a sd 8gb class 10
yes i did....several times.
yourender2 said:
Happy to see new sd-dev here.
Click to expand...
Click to collapse
yessssss +1
Send from my hd2 Under android By Mdj build.
looking nice going to try now thx
mr-evil1
Thnx bro, nice to see new ICS Rom
Founded problems:
- Internet connection failed (GPRS/3G and WiFi)
- PC can't find my HD2 via HTC Sync and Droid Commander
- Android can't find SD (goodram 16 Gb)
- Telephony is unstable, sometimes does not work phone calls and SMS
I can't see the download link!! Please update.
Thank you
OK Let us try and report later on!!
Update
sayhellohd2 said:
I can't see the download link!! Please update.
Thank you
Click to expand...
Click to collapse
Hello friends!
I've fixed the bug! Now working fine! I've used the DORIMANX Kernel 4.3
c1cl0n said:
mr-evil1
Thnx bro, nice to see new ICS Rom
Founded problems:
- Internet connection failed (GPRS/3G and WiFi)
- PC can't find my HD2 via HTC Sync and Droid Commander
- Android can't find SD (goodram 16 Gb)
- Telephony is unstable, sometimes does not work phone calls and SMS
Click to expand...
Click to collapse
Try the new Build! It will work fine!
i`m in !!! restoring a bunch of apps and here we go !!! feedback for tomorrow but so far so good ! the previous rom based on ICS crashed when uding soft keys , i`ll try with this one ! Thanx mate !
mr-evil1 said:
Try the new Build! It will work fine!
Click to expand...
Click to collapse
so far new build has been good. i was able to make and receive call have not tried SMS yet.
just curious wich one do you guys think is better between this build and v 1.3? im using 1.3 right now and i dunno if i want to test another if it isnt as good ty.
mr-evil1
Thnx bro for work, but SD card still can't mount
first Thanx man
only problem - sd card can't mount
cheers
Present to you the firmware OWA HD
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Firmware version is created on the 6.0.B.3.184
Lite version Firmware.
Removed a lot of widgets and software factory
Modified design, and various other fixes
When you first load the firmware available for 240Mb of free RAM
What is left after the removal of the firmware.
Changelog
Code:
OWA HD (Revision Mirai) - 10 October 2012
Fix Audio xLOUD
Fix Beats Audio
The increase in multimedia sound from 15 to 30
Different interface-refinement
Boot Speed up Firmware
Processing of the camera module
Fix Google Sync
Add QuickPanel
New Unlock Theme
Tweaks in xbin
Tweaks in bin
New Add and Remove app
And More FIX
OWA HD (Revision Loli) - 10 August 2012
Batery Fix in 1%
Batery Charge Animation Fix
New Theme
Beats Audio
Quick Fix battery discharge from 100 to 90%
Fix the battery capacity in the firmware
Quality stock video recording camera upgraded to 15MB
Quality video recording LGCamera upgraded to 100MB
Quality video play upgraded to 60MB
Tweaks in build.prop
The quality of pictures save jpg 100%
OWA HD - 05 August 2012
Tweaks fast rom
Removed APP
Removed Live wallpapers
Home Tweaks
pre-rooted
Blue battery % theme
Tweaks battery
And More Tweaks
OWA HD - 21 July 2012
Add Deblock
Fix Audio 60-FPS
Edit Core Thread
Add Audio widget
Add Aroma Installer
OWA HD - 17 July 2012
Add [email protected]
Add [email protected]
Added video fix to build.prop
Add 8 frames max Play Video
Add max 60 FPS Play Video
Add max bitrate 40MB for 1280x720
Add Audio widget
Screenshots
Download
Yandex miror: OWA HD Narod
INSTALLATION
Kernel after the installation remains in place.
Download the rom, drop it in the root of your SD
Transfer the zip file you downloaded above to your internal sdcard (not the external micro SD).
Turn off the phone, then boot into recovery mode. For this, press and hold Menu Button Until CWM screen shows up: Volume Button.
Phone will boot into CWM recovery. Use volume keys to scroll up and down between options and Volume Rocker key to select an option.
Perform a wipe:
Go to “advanced” and then select “wipe dalvik cache”, then select “Yes” on next screen. Now, go back to main screen of recovery.
Select “mounts and storage”, then select “format system”. Select “Yes” on next screen to confirm. Go back to main recovery menu after system format is complete.
Then, select “install zip from sdcard”, then select “choose zip from sdcard”. Then, browse to the file you transferred to the sdcard in step 2 and select it.
Confirm installation on the next screen by selecting the option ”Yes — Install OWA HD (Revision Loli).zip“. The ROM will now start installing.
After installation is complete, select “go back” then select “reboot system now” to reboot the phone.
Click to expand...
Click to collapse
Hi, Bro! Nice work, deleted all excess software, so speed of the work is good. Free RAM space after first run - 240mb. But I`m found some problems. For example, volume of multimedia is decreased by 50%. This firmware have Xperia SSpeed Kernel v3 with him problems (some peoples says what Wi-Fi Routing doesn`t work). I use this firmware a week, estimate is 5+
flashing via Flash tool ? Stock kernel remains ? Please include in your first post Installation notes.
kosmasgr said:
flashing via Flash tool ? Stock kernel remains ? Please include in your first post Installation notes.
Click to expand...
Click to collapse
Added information on the installation.
This ROM use Xperia SSpeed Kernel v3. Flash with the CWM Recovery (only over .184 stock firmware with CWM Recovery kernel)
Why is "format system" needed?
stalvekio said:
Why is "format system" needed?
Click to expand...
Click to collapse
What would completely remove everything.
How to boot into CWM Recovery ? Im with official .184 firmware
kosmasgr said:
How to boot into CWM Recovery ? Im with official .184 firmware
Click to expand...
Click to collapse
Switch off device
Boot it and as soon as it vibrates for the first time and blue led glows press volume up (+) key
Walla recovery menu pops up
Sent from my MT27i using xda premium
With next ROM update could you remove this annoying data off notification. It drives me crazy
stalvekio said:
With next ROM update could you remove this annoying data off notification. It drives me crazy
Click to expand...
Click to collapse
Well delete. It is not difficult in theory.
soulhackereborn said:
Switch off device
Boot it and as soon as it vibrates for the first time and blue led glows press volume up (+) key
Walla recovery menu pops up
Sent from my MT27i using xda premium
Click to expand...
Click to collapse
Yeah but this is recovery mode , not ClockworkMod Recovery. I can install this rom also using stock recovery ? thank you.
awesome HD video support here... how about wifi signal and wifi hotspot signal?!?
Suggestion/Request
First off, it is nice to see people pitching in for xperia sola development and I thank you for that. However, can you somehow change the theme to ICS like theme? I kinda like the ICS theme. Thanks in advance.
kosmasgr said:
Yeah but this is recovery mode , not ClockworkMod Recovery. I can install this rom also using stock recovery ? thank you.
Click to expand...
Click to collapse
No, its rom needed ClockworkMod Recovery
Ankon90 said:
No, its rom needed ClockworkMod Recovery
Click to expand...
Click to collapse
Thank you. I think you mean this CMW http://forum.xda-developers.com/showthread.php?t=1766892
Root explorer is paid app, please remove it.
i prefer the original theme:fingers-crossed: but thank you very much
As i can see on the screenshots, it's lacking the 14 quickpanels. I Hope to see it on the next release, but btw, you did really great!!
Hey! Great upload. I've just got this phone yesterday only and and a fun time playing around with it.
Flashed your ROM just only and I've noticed several notes I might like to point out.
-Is there any way to revert back to stock theme? (I don't fancy the statusbar icons you've set.. no offense!)
-Livewallpaperpicker.apk should come in useful. Especially since you have cosmicflow.apk installed.
Edit: Will try it for a day or two and report in any bugs!
Regarding the points I've suggested, its YOUR rom so of course, develop and style it as you wish
But for each unique user's peferences, could you upload an attachment of apk-s which you've removed from the stock ROM as well as the stock theme's files to revert back? Would be really useful.
Cheers and thanks for your work! Amazing
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To install the firmware your phone should have ROOT and loaded CWM
you also have to unlock the bootloader on your phone.
The latest versions of firmware I placed in 1 Post this Topic
turning now available link.
---------------------------------------------------------------
Installing the firmware:
Download and copy the file to the selected Rom on the memory card
Download and copy the file to the memory card gapps
Installation is via CWM recovery
Prior to installation, do:
Start CWM recovery
Wipe data / factory reset
Wipe Cache
Advanced / wipe Dalvik cache / yes
Mounts and storage
Mount system
format / system
install zip from sdcard
choose zip from sdcard external
Select soft from memory card
Yes
choose zip from sdcard external
Select GAPPS from the memory card
Yes
Restart the phone
First start takes a long time, wait for the launch of the phone.
---------------------------------------------------------------
CONTENTS:
Uploaded kernel OC 1228 MHz, recommended 1100 MHz
Rom is based on the latest version of CM11 LG P700 to cr3pt
Uploaded Baseband v20h,
Uploaded latest recovery 6.0.3.2
Unlocked bootloader,
Scripts and optimization
Binary ports of Crespo (GOOGLE NEXUS) plus my own
Rom has two Launchers
Zipalign apk
Rngd Entropy
---------------------------------------------------------------
Download links:
KitKat Prime 4.4 LG P700
Smal Gapps 4.4
Polish Dictionary KitKat Prime.zip
Google multilanguage keyboard with a working function swype
Boot Logo
---------------------------------------------------------------
Screens:
---------------------------------------------------------------
FAQ:
Soft may contain errors CM11
Application Aptoide (Theme Chooser 2) is used to download the theme, and to confirm the theme using the option in the settings
Beta version is also please bear with us
[*]As a Browser I recommend Google Chrome or Opera
Enable options by clicking 7 times in the build number in the About Phone tab
Change Window animation scale and transition i dev. options for 0.5 to achieve a better fluidity of animation
In the dev. options, select the Advanced Options reboot it easier to get access to run the phone in standby recovery mode
Don't you ever format data in recovery
Gapps are included in ROM
---------------------------------------------------------------
thanks to:
cr3pt
TeamHackLG
CyanogenMod Team
tudorsirb
PecanCM
FedeeManchini
Good work,looks very nice. :thumbup:
GREEEETZ!!!
Good job be continous ..
You are a god DDD I just love your ROMs because they are the smoothest, since S4 ROM. Haven't tried yet but I can see that you did a good job again. Screens looks awesome. Can you tell diffrences between this and CM11 ROM? Congrats again
You finally share it here in xda.
Thanks op.
Sent from my LG-P700 using Tapatalk
whats the difference between this one and cr3pt's or tudorsirb's builds?
Benj7GR said:
whats the difference between this one and cr3pt's or tudorsirb's builds?
Click to expand...
Click to collapse
And what is the difference between Build cr3pt and tudorsirb or between CM11 in the nexus and CM11 for Samsung, etc., install, check and see for yourself how and what is the difference
szymel0 said:
And what is the difference between Build cr3pt and tudorsirb or between CM11 in the nexus and CM11 for Samsung, etc., install, check and see for yourself how and what is the difference
Click to expand...
Click to collapse
He just wanted to ask what did you change on Cr3pt's ROM.
kristijan505 said:
He just wanted to ask what did you change on Cr3pt's ROM.
Click to expand...
Click to collapse
Read 1 Post lawyer :good:
and
I introduced a special code, which I correct with every version
Update in first post
After the install the maximum processor speed is set to 1000 Mhz and the freq does not go higher than 600 mhz. if i set it manually to 1008 mhz it works fine . also nfc cannot be disabled .
yorulezkos said:
After the install the maximum processor speed is set to 1000 Mhz and the freq does not go higher than 600 mhz. if i set it manually to 1008 mhz it works fine . also nfc cannot be disabled .
Click to expand...
Click to collapse
Set processor to 1200 MHz, and uncheck android beam and then NFC off.
after the second reboot freezes on bootanimation, stand more than ten minutes and I have to remove the battery to return to recovery
yuppy2976 said:
after the second reboot freezes on bootanimation, stand more than ten minutes and I have to remove the battery to return to recovery
Click to expand...
Click to collapse
i also noticed this before the update, after installing Google Keep the phone never started again. i'm not sure if Google Keep was the problem.
Edit : i just installed Google Keep after the update and the phone is stuck in boot animation . back to recovery
Update to Prime_KitKat_p700_Gapps_signed_120413_180002
Fix bootup time
Left one launcher Google
Changed the look of many of the system components, frames, transparency, etc.
Gapps are already included in rom also you do not need to install them.
Recommended installation on a purely clean :good:
This is still beta ?
@up
Yes
szymel0 said:
@up
Yes
Click to expand...
Click to collapse
updated, Google Keep now working, no bootloop . white contacts from Phone/All Contacts fixed
there is a problem with the internet app, the screen is clipping, scrolls with no reason, its unusable. The real problem is when you try cu use IM+ to connect to facebook, because it uses the roms internet app to display the connection page to FB.
yorulezkos said:
updated, Google Keep now working, no bootloop . white contacts from Phone/All Contacts fixed
there is a problem with the internet app, the screen is clipping, scrolls with no reason, its unusable. The real problem is when you try cu use IM+ to connect to facebook, because it uses the roms internet app to display the connection page to FB.
Click to expand...
Click to collapse
Yes i now this in all cm11 roms form L7 thats bug is, i recommend use google chrome. :good:
Roughly how long is the first boot? I've installed the latest version:- Prime_KitKat_p700_Gapps_signed_120413_180002
But it's been on the boot anim for about half an hour. How long should I wait?
WidowCranky said:
Roughly how long is the first boot? I've installed the latest version:- Prime_KitKat_p700_Gapps_signed_120413_180002
But it's been on the boot anim for about half an hour. How long should I wait?
Click to expand...
Click to collapse
that is too long... reboot to recovery, wipe cache and dalvik and try again.