Hi, I m using htc evo 3d i hadn't made any backup of my stock rom while updating with custom rom now when i installed couple of roms camera is not working at all... when i tap the camera app a blank screen appears and disappears i m now using yoda's ics and camera is not working all other things are working fine and most importantly i had an official update for ics and i had updated that and the camera was working at that time... Any Help pl?????
Reflash stock Rom. And make a backup
Sent from my Evo 3D GSM using xda app-developers app
Flash a sense 3.6 rom and tell me if it's working.
i have flashed sense 3.6 rom dont have a stock rom but tried yoda's ics, cool ics and some how sad ics. Sad ICS wasn't working at all i.e bootloop but other two are working perfectly except camera
Doh, cam must be broken. Sounds like a hardware problem. Ofc you can try flashing a RUU, maybe that will help, not sure though.
MrJyrks said:
Doh, cam must be broken. Sounds like a hardware problem. Ofc you can try flashing a RUU, maybe that will help, not sure though.
Click to expand...
Click to collapse
managed to find the sensor of my camera it is samsung i think it is the driver issue can you recommend any driver for that.
Related
Hey all, got a question about my camera. Basically, it won't work and I'm not sure why haha. I'm kind of a noob when it comes to these things just FYI.
So, I flashed viper rom and the camera doesn't work, however, it didn't work with my previous rom either which was CM7. When I open the camera app it just immediately crashes. I'm running stock kernel, the newest build of viper rom, hboot 1.4.
Any help is appreciated and if there's any other info you need please ask!
Thanks a lot.
Bacardi222 said:
Hey all, got a question about my camera. Basically, it won't work and I'm not sure why haha. I'm kind of a noob when it comes to these things just FYI.
So, I flashed viper rom and the camera doesn't work, however, it didn't work with my previous rom either which was CM7. When I open the camera app it just immediately crashes. I'm running stock kernel, the newest build of viper rom, hboot 1.4.
Any help is appreciated and if there's any other info you need please ask!
Thanks a lot.
Click to expand...
Click to collapse
Did you do a full wipe prior to flashing viper?
Sent from my PG86100 using Tapatalk
Hello guys,
I installed CoolICS rom after I was on LeeDroid with Sense 3.0
After installation my phone started rebooting every 30 minutes. I restored LeeDroid one from nandroid backup.
Is it possible that this behaviour is caused by restore of some apps from Titanium Backup?
I was doing some debugging using the Android Monitor from tdk, but right before the reboot there was no error message.
I am running latest firmware and lates 4ext recovery.
I really want to go for ICS or Jelly Bean.
Thanks for your help!
actually it reboots after LeeDroid nandroid restore. Is it possible to be the new firmware?
You should try running Cool ICS for a while with only basic setup and no TB apps restored for while and see if the problem persists. I'm not familiar with the app you mentioned, but have you been able to pull a logcat after you have the reboots?
ramjet73
ramjet73 said:
You should try running Cool ICS for a while with only basic setup and no TB apps restored for while and see if the problem persists. I'm not familiar with the app you mentioned, but have you been able to pull a logcat after you have the reboots?
ramjet73
Click to expand...
Click to collapse
Hi ramjet73,
I flashed KingCobra3D-ICS 1.6. I installed only 3 apps from the google market. After approximatelly 3.5 hours of uptime, I got a reboot. Unfortunatelly I was not home and i did not get the catlog. Now, I am waiting for reboot to happen again and will attach the catlog here.
Thanks for help.
mavvar said:
Hi ramjet73,
I flashed KingCobra3D-ICS 1.6. I installed only 3 apps from the google market. After approximatelly 3.5 hours of uptime, I got a reboot. Unfortunatelly I was not home and i did not get the catlog. Now, I am waiting for reboot to happen again and will attach the catlog here.
Thanks for help.
Click to expand...
Click to collapse
sounds like its your firmware dude. i had an issue like that as well. get a freeza all in one zip for radio and reflash your radio but find one that is for your setup. it looks like you are GSM is that correct?. just my opinion or if your using a modded kernel make sure your not going to far up on overclocking it can cause bootloops.
gmzombie said:
sounds like its your firmware dude. i had an issue like that as well. get a freeza all in one zip for radio and reflash your radio but find one that is for your setup. it looks like you are GSM is that correct?. just my opinion or if your using a modded kernel make sure your not going to far up on overclocking it can cause bootloops.
Click to expand...
Click to collapse
Hi man,
Thanks for answering.
I flashed the suggested firmware in the post for the ROM I am using:
http://forum.xda-developers.com/showthread.php?t=1647674
I downloaded firmware from the link in Install section on post #1. I am running GSM indeed. I have installed only basic Sense stuff from the ROM without any AOSP functionality.
Since I am not really good in this, may you please advise which Firmware will be OK for me.
As for the kernel - it is the Stock one.
Regards
Hello,
So, I flashed latest Radio from following thread:
http://forum.xda-developers.com/showthread.php?t=1218196
And all is OK now. No reboots . I had uptime of 12 hours and rebooted to perform nandroid backup. Now I am at 5:30 hours uptime.
Thanks for all your help!
Actually, any known issues with Radio 11.77.3504.00U_11.25.3504.06_M
It was the one that made my phone reboot. I rollbacked to 10.53.9020.00_10.13.9020.08_2M - Isn't this for Gingerbread (I am running ICS)
Thanks!
Maybe you can flashing another roms or kernel
Sent from my PG86100 using xda premium
tukijembz said:
Maybe you can flashing another roms or kernel
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Hello,
I flashed 3 ROMs - the same with all of them. ROMs are Evolver 3D, KingCobra 3D (one that i am running now) and CoolICS 3D. With each, I flashed the kernel that came with it. My device was rebooting with all of them. It is only after I flashed 10.53.9020.00_10.13.9020.08_2M . that my device stopped rebooting.
last time, i was on ics i rooted my my phone and got recovery mode so i flashed cm 7.2 to my phone, it reboots after several hours and reboots after i ended a call so i flashed to gingerbread now. if i flash to cm7.2 again will the same problem occur? i thought it might be the problem that i flash cm7 from ICS because cm7 is base on GB.
hope to see some help here.
thanks!
why dont you you back everything up and jump to Jellybean?!??
if you're flashing roms already you may aswell take a look at some of the latest offerings
Li4m79 said:
why dont you you back everything up and jump to Jellybean?!??
if you're flashing roms already you may aswell take a look at some of the latest offerings
Click to expand...
Click to collapse
well, jellybean was awesome but with the volume bugs, front camera and gallery force close its very annoying me.. i can just flash to JB too even im on Gingerbread?
galaxy16 said:
well, jellybean was awesome but with the volume bugs, front camera and gallery force close its very annoying me.. i can just flash to JB too even im on Gingerbread?
Click to expand...
Click to collapse
Yes just flash the siyah kernel first. I'm on jellybean no facing any of those problems you mentioned.
Sent from my potato running a potato.
preseodymium said:
Yes just flash the siyah kernel first. I'm on jellybean no facing any of those problems you mentioned.
Sent from my potato running a potato.
Click to expand...
Click to collapse
hmm... even the front camera does not fc after few shots? or go back to take some shots after you exit the camera
I'm using Jelly Bean and it' really great,
on the beginning there was lots of bugs,
but now it works perfect!
Ok, so ive had a couple of problems with my recently bought Sgs2, ive got all the other problems fixed except this one: when i turn on the camera app, the flash goes on and off once, the same happens when i turn off the camera. Its a very fast flash that occurs.. it doesnt matter what camera app i use, it does it everytime.. the flash does work properly during camera use if needed, and works normally as a torch.
It doesnt bother me much, but would be nice to get fixed..
Any ideas?
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
*boy*racer* said:
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
Click to expand...
Click to collapse
Im using SlimICS 4.2+ Siyah 5.0.1
So he said.... That if You using not stock rom flash bug be...
Looks like he said: if its a custom JB rom, the bug occurs. Im using ICS and the same thing happened before i even flashed a custom rom. The phone was running a stock Samsung GB rom then..
"He" has a name
And if u said it happened before flashing roms, Then it must be a hardware issue.
Sent from my Galaxy SII
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
*boy*racer* said:
"He" has a name
And if u said it happened before flashing roms, Then it must be a hardware issue.
Sent from my Galaxy SII
Click to expand...
Click to collapse
I feared this was the issue.. oh well, i guess ill just have to live with it until i change my phone again, no biggie
elfrawg said:
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
Click to expand...
Click to collapse
It happened to you after switching to custom roms?
elfrawg said:
I have the same problem, that the flash will light up shortly when the camera app closed, and when I read the last comments it seems that this is a known issue for quite a while.
How does it come that this is not fixed yet. I'm using custom roms now for a few month now and from the beginning I was wondering about the strange flash behaviour compared to the stock rom.
Is it because there is still no official release from Samsung for JB or why is it so difficult to fix? Are the camera drivers closed source?
Click to expand...
Click to collapse
Mongopusher42 said:
I feared this was the issue.. oh well, i guess ill just have to live with it until i change my phone again, no biggie
Click to expand...
Click to collapse
Guys, it has got nothing to do with the hardware, its a random one that happens with all ICS and JB based custom roms
@Sun90
If you read the whole thread , i had the problem before custom roms with a 100% stock Samsung GingerBread rom..
Mongopusher42 said:
@Sun90
If you read the whole thread , i had the problem before custom roms with a 100% stock Samsung GingerBread rom..
Click to expand...
Click to collapse
have u tried flashing a Stock ICS rom (v4.0.3) and seen for the issue
if not give it a try and see, just to confirm whether its really a hardware issue or a software one
nothing to loose though, if the problem gets resolved for u it would be fine right
do a clean wipe before installing.
Sun90 said:
have u tried flashing a Stock ICS rom (v4.0.3) and seen for the issue
if not give it a try and see, just to confirm whether its really a hardware issue or a software one
nothing to loose though, if the problem gets resolved for u it would be fine right
do a clean wipe before installing.
Click to expand...
Click to collapse
Nope. Okk , ill try this when i have some spare time :thumbup:
Sun90 said:
Guys, it has got nothing to do with the hardware, its a random one that happens with all ICS and JB based custom roms
Click to expand...
Click to collapse
I used to get that on my x10i with certain roms.Definitely a software problem.
Same issue here, came about randomly day before yesterday. LED flashes once, quickly, whenever something tries to activate it.
Only ever used stock soft/firmware, and Chainfire's kernel. Cleared all caches, tried factory reset, problem persisted.
Flashed to whatever the latest ICS is for H3G today, problem still persists, I shall try official kernel tomorrow, see if that fixes it -- I don't hold much hope.
*boy*racer* said:
If your using a custom jb rom then it's normal. It's a known bug.
Sent from my Galaxy SII
Click to expand...
Click to collapse
I'm using hellybean 4.2.1 and I don't have this bug!!
Hi guys,I installed WanamLite ROM 6.6 and Perseus kernel 36.3 with undervolt settings. My phone is ASV6 type. I had problem with my camera. It says "Can't connect to camera". I also tried third party camera like Camera360 and the Nexus 4 camera.
I installed AOSP ROMs like Temasek's CM10.1 with his kernel. But still no luck. The rest of things are working fine.
I flashed back to Stock ROM with latest 4.1.2 jellybean firmware.
But the weird thing is, why the camera are working only Stock ROM? It is still working although I rooted it.
Any ideas?
EDIT: I was thinking that it is a kernel issue, so I tried to flash other kernel. But still didn't work.
EDIT 2: Typo " why the camera are working only Stock ROM?"
Actually for AOSP roms the error is quite a know problem. Nevertheless Wanam is based on Samsung TW, hence camera should work fine.
chrismast said:
Actually for AOSP roms the error is quite a know problem. Nevertheless Wanam is based on Samsung TW, hence camera should work fine.
Click to expand...
Click to collapse
Thanks for replying, FYI I've flashed MIUI ROM v4 for a while. Still does't work. So I can confirm that I have the problem when installing a custom ROM.