Hi. I had i9300XXELLA before , Rooted + CW Recovery + Sihay Kernel. I was installing some roms as second rom like (cm10.1 nightles, Piquidsmooth RC1, ParanoidAndroid 3.0, Supernexus 2.0) after installing the lates CM 10.1 i lost my ime and baseband. After i send to servis center and now i have i9300BULG2 whith CW Based CF v-1.5 but i dont have SU. I want to now if i can install SU via recovery or i Need Odin ( i want to save EFS file) and if i can update via odin to 4.1.2 coz OTA update failed at 30%. Sorry for my long question and if this was ansered before. Thnx
Sent from my Gt i9300
Enea307 said:
Hi. I had i9300XXELLA before , Rooted + CW Recovery + Sihay Kernel. I was installing some roms as second rom like (cm10.1 nightles, Piquidsmooth RC1, ParanoidAndroid 3.0, Supernexus 2.0) after installing the lates CM 10.1 i lost my ime and baseband. After i send to servis center and now i have i9300BULG2 whith CW Based CF v-1.5 but i dont have SU. I want to now if i can install SU via recovery or i Need Odin ( i want to save EFS file) and if i can update via odin to 4.1.2 coz OTA update failed at 30%. Sorry for my long question and if this was ansered before. Thnx
Sent from my Gt i9300
Click to expand...
Click to collapse
As far as i understand
SU is only an app, you can install it from Play if you still have root acess that is?
If you install 4.1.2 via odin you will have to do the whole rooting procedure again.
I have installed SU from PlayStore but doest have superuser aces. I have to update 4.1.2 after i can try to root whith odin. I hope not to lose my EFS again.
Sent from my GT-I9300 using xda app-developers app
Enea307 said:
I have installed SU from PlayStore but doest have superuser aces. I have to update 4.1.2 after i can try to root whith odin. I hope not to lose my EFS again.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
sounds like you need to root your phone again, which i would assume since it went to a service centre. I would root it, backup your EFS then flash 4.1.2 and root that.
Related
Is there any unsecured kernal support this rom to root ?
Without using CWM ?
If I rooted with SuperOneClick with compatible insecured kernel, Yellow triangle and Reset counter actions possible with Flashing back stock kernel and download mode jig ?
Reply from subject experts are most welcome ..
Sent from my GT-I9100 using xda premium
i am looking for the same answers.
No replies ??
Sent from my GT-I9100 using xda premium
I used XXK14 insecure and rooted with S2 Root. Afterwards I flashed back stock kernel with Odin
Root with CF-Root kernel for KI8 then flash back to the stock kernel. You'll maintain root but lose the CWM Recovery menu. You'll have stock recovery, stock kernel and no yellow triangle.
thank you, I will try and post the result
Sent from my GT-I9100 using xda premium
This will increase the counter ? Can I reset Using download mod jig ?
Sent from my GT-I9100 using xda premium
shafeeqmk said:
Is there any unsecured kernal support this rom to root ?
Without using CWM ?
If I rooted with SuperOneClick with compatible insecured kernel, Yellow triangle and Reset counter actions possible with Flashing back stock kernel and download mode jig ?
Reply from subject experts are most welcome ..
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i have the same version as the one you mentioned in your post
kernel version
2.6.35.7-I9100JPKJ2-CL655700
[email protected] #2
PDA: I9100JPKJ2
PHONE: I9100XXKI4
CSC: I9100OJPKJ1
and i searched for insecured kernel but i didnt know which one to use
and then i tried this script (DooMLoRD_v1_ROOT-zergRush-busybox-su.zip)
http://forum.xda-developers.com/showthread.php?t=1312859
i replaced zergRush file with the latest versions before running the batch
https://github.com/downloads/revolutionary/zergRush/zergRush.zip
and it rooted the device in less than 3 minutes with no problem at all (running titanium, rom manager or any app that require root)
but i faced one problem when using ROM Manager (ClockWorkMod 4.0.1.5) to do a Backup current ROM (from Rom Manager or by booting into Recovery)
I get the following message:
-- Installing package...
Finding update package...
Opening update package...
Verifying update package...
E:failed to verify whole-file signature
E:signature verification failed
Installation aborted.
don't know if doing soft-root is the problem and i have to do hard-root to make CWM work
any way just wanted to share my experience with you
regards
Thanks man it worked like a charm
btw where is that +1 button? I can't seem to find it
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Rooted perfectly with SuperOneClick 2.2 , with Just One Click ...
HELP
I did flash insecured kernel, rooted with odin and flashed back stock kernel everything was good untill i used titanium backup and actually deleted some staff not freezing them DELETE from rom how can i get the phone back to stock. is there a complete rom and a way to install that rom back with all what i deleted ?
odm3xda said:
I did flash insecured kernel, rooted with odin and flashed back stock kernel everything was good untill i used titanium backup and actually deleted some staff not freezing them DELETE from rom how can i get the phone back to stock. is there a complete rom and a way to install that rom back with all what i deleted ?
Click to expand...
Click to collapse
Just flash a firmware over you current firmware to get stock firmware wit stock apps or just download and installed iteams you deleated...
is there a way to get rid of touchwiz on this device ? and use android stock looks all over the phone ?
not only the launcher i mean every samsung custom dialer, messaging, notification bar and everything
odm3xda said:
is there a way to get rid of touchwiz on this device ? and use android stock looks all over the phone ?
not only the launcher i mean every samsung custom dialer, messaging, notification bar and everything
Click to expand...
Click to collapse
Yes you can, but for this you need Root.
In rooted phone, just delete the unwanted applications (caution advised) by using root explorer and deleting the apks in /system/apps
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
did u try to unroot the phone from the same app? does it work?
cyberkhan said:
Yes you can, but for this you need Root.
In rooted phone, just delete the unwanted applications (caution advised) by using root explorer and deleting the apks in /system/apps
Click to expand...
Click to collapse
Yikes. Don't follow this extremely abridged suggestion.
S2 Root
Koudelka said:
another way to root is using SuperOneClick v2.2 since now it have the zergRush exploit
so it will work also
Just extract SuperOneClick 2.2, run it and click Root
(I test it on same device after unrooting it and it worked perfectly)
http://forum.xda-developers.com/showthread.php?t=803682
Click to expand...
Click to collapse
Dear Koudelka,
Iam new to Android and Root.
Iam bit Confuse firmware and Root.
I want root my Galaxy S2
My S2 details
kernel version
2.6.35.7-I9100JPKJ2-CL655700
[email protected] #2
PDA: I9100JPKJ2
PHONE: I9100XXKI4
CSC: I9100OJPKJ1
Etisalat,Dubai.
Can you advice where can i download correct root application and how to.
Thanks & Regards,
Murali.K
Dubai
pick the correct cf root kernel from my signature link if u are looking for method to root your phone
in a single flashing you will get Rooting and CWM
for JPKJ2 use this kernel, flash it from PDA section of the ODIN after unzipping to TAR file
read Gides for flashing files from ODIN...
http://download.chainfire.eu/48/CF-Root/SGS2/CF-Root-SGS2_XW_XEF_KJ2-v4.4-CWM4.zip?retrieve_file=1
Jpkj2 can also be rooted using super one click using zergrush.
Counter will not bee added and you will not get yellow triangle
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
bbk said:
Hi,
I've got 2 questions :
-Can i update my Samsung Rom to CM9 with :
1-boot on recovery mode
2-Load "CWM.zip", i've download on XDA
3-Load CM9.ROM.ZIP
4-Reboot
-Can i change the kernel on Samsung ROM ?
Click to expand...
Click to collapse
in order to install CM9 rom u have to first root ur Phone using a CF-root Kernel
since Cm9 cannot be flashed with Stock recovery as it needs Custom recovery
so first root ur phone and then install CM9
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
bbk said:
My phone is already root. (with any PC )
CWM.zip is a ClockWorkMod in a ZIP to load in memory a CWM-recovery 5.X
What is a CF-Root kernel ?
Click to expand...
Click to collapse
CF- chain Fire-Root kernel will root ur phone and install custom recovery on ur Phone
so if ur phone is already rooted then install the CWM.zip file, then reboot into cwm recovery and install the CM9 zip file
before that in cwm recovery make a nandroid bkp of ur exsisting rom first
and also follow the instructions of flashing CM9 rom carefully form there thread OP
Thanks, i will try in 2 days
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
bkhaliq said:
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
Click to expand...
Click to collapse
Try flashing a PDA which has a CF-root available ( via PC-ODIN).
Then flash the CF root to gain root and CWM.
CWStJNobbs said:
You root it using the same method as before, I assume via ODIN, but with an LP7 CF-Root kernel.
Click to expand...
Click to collapse
Thanks for the effort
please tell me from where can i get the
LP7 CF-Root kernel
help needed
Hi
I have ICS 4.0.3 (GT-i9100BULP7 | LP8 | IML74K.BULPD), can someone tell me how to root it.
i rooted it before the update with "CF-Root-SGS2_BU_VOD_LPC-v5.4-CWM5".
After the update my mobile is unrooted
my i9100 also has the BrickBug Chip issue
Hi
Jus updated to ICS 4.0.3 from GB 2.3.5
Like I used to do , root device then install the official karenl to get rid of the yellow triangel, while still having the root .
In ICS I did the same , I can access to root system files and folders , using Titanum backup no problem , but when accessing the CWM it tells me that I don't have proper root , tried to use another app reauire root , it tells me that my device does not have root privilege , when I installed the rooted karenel , they work fine .
This move used to work fine under Ginger bread , accessing to CWM after using official karenel over root.
Official updated karenl : I9100 XXLPF
Root karenel : I9100 XWLPF
Reinstalled offical karnel : I9100 XWLPF
Any idea ?
Thanks.
Use cf-root LPF. Should work fine.
Sent from my GT-I9100 using xda app-developers app
Spiralzz said:
Use cf-root LPF. Should work fine.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I didn't ask about which kerenl I should use , I already used LPF , the idea from installing the offical kernel back is to
get rid of yellow triangle.
Guess , I'm on my own...
if u wanna get rid of the yellow triangle u can do this by 2 ways:
1) flash stock kernel then download the custom kernel .zip u want and extrazt the zImage from that .zip file and install zImage file via cwm app in your app drawer
2) or simply if you're on ICS then use trinagle away v 1.70 by chainfire link :http://forum.xda-developers.com/showthread.php?t=1494114
( normal apk , of course needs root , normal install and it will reset ur flash counter and remove the annoying yellow triangle and keep u rooted )
Oh great ! The first methode worked perfectly , now I have my stock kernel with root privilege
hmmm...I have to exract the image to flash it, I feel kinda stupid xD
Thanks alot
+1
how to root leaked xxlsj 4.1.2 for s2??
gdstheking said:
how to root leaked xxlsj 4.1.2 for s2??
Click to expand...
Click to collapse
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Sun90 said:
Download and flash the 'Philz' Kernel to root ur phone on xxlsj 4.1.2
since its the only Custom kernel that supports the same
ur 1st TM by me enjoy
Click to expand...
Click to collapse
what about "Siyah-s2-v4.1.5"???
i flashed using philz kernal but no supersu >>??
Why not make a 3rd thread about that......you might get lucky.
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
given give a download link for supersu for philz kernel
Youu will not get root access if you flashed it via odin, download cmw version of it and.flash
Sent from my GT-I9100 using xda premium
philz kernel
ankur.co.in said:
Just flash the philz kernel and then install supersu via cwm
Click thanks if I helped you
Click to expand...
Click to collapse
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
droid_s2 said:
first of all i clicked thanks already. Hehe.
Could you please send me the link where i can download philz kernel for jb.
It would be a great help.
I have stocked jb leaked and i want to change to rainbox.
Ill click thanks again just guide me where can i download the file.
Click to expand...
Click to collapse
Here is the link bro sorry for late reply btw thanks for your thanks
http://forum.xda-developers.com/showthread.php?t=2031042
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
aboalghool said:
hey all.. im a newbie looking for some help
i did root my sgs2 phone jb version with cwm and i have superuser app installed and i have verified that it is rooted.
however i download beats audio which jammed my music player ..
so i was wondering if i can flash the stock jb again via odin ??? and will my phone if flashing works make it unrooted again?
Click to expand...
Click to collapse
Yeah after flashing the firmware via odin ur phone will be unrooted
That 'exynos exploit' by 'chaingire' can also be used to root XXLSJ in just one click, without any flashing etc.
Sent from my GT-I9100 using xda premium
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
match_stick said:
Hi I hope someone on here can help me...
I recently flashed my girlfriends sgs2 (via odin pc) with the new XXLSJ jelly bean leak. Because its not 'officially' released we have to use Philz kernel, is that correct? I basically want completely stock and the update WITHOUT ROOT AND YELLOW TRIANGLE...
Is this possible?
I myself have the same phone and have custom rom based on this leak and Philz kernel, but for some reason have no triangle? ?
So, I want...
- Jelly Bean Stock rom
- No Root/Triangle.
Thanks. ..
Maybe I should have waited for the official release..
sent from the unknown
Click to expand...
Click to collapse
When u flashed that leaked firmware, ur phone was already in stock but with TW 5 unrooted condition.
Secondly, for that triangle problem....Use the 'triangle away' app from play store.
Also, if u want official update then for few weeks more :/
Sent from my GT-I9100 using xda premium
Cool. I've heard some stories of hardbrick when using that app... but will most likely wait for the official update
sent from the unknown
OK, think I must be being a little bit blind around the forum, but cannot seem to locate how and links to perform a root once I update to 4.3
I'm running 4.1.2 and am currently rooted (I used CF-Root-SGS3-v6.4 since forever and always seems to work), which seemed to work fine on 4.1.2. However, reading all over the place about rooting being different on 4.3, but as I said, just cannot seem to find links and info on how to do it on the latest
I know I can easily install the 4.3 update using ODIN to replace 4.1.2, but would then like to re-root once this has been done
Any help and links much appreciated
Cheers
Albie
albie999 said:
OK, think I must be being a little bit blind around the forum, but cannot seem to locate how and links to perform a root once I update to 4.3
I'm running 4.1.2 and am currently rooted (I used CF-Root-SGS3-v6.4 since forever and always seems to work), which seemed to work fine on 4.1.2. However, reading all over the place about rooting being different on 4.3, but as I said, just cannot seem to find links and info on how to do it on the latest
I know I can easily install the 4.3 update using ODIN to replace 4.1.2, but would then like to re-root once this has been done
Any help and links much appreciated
Cheers
Albie
Click to expand...
Click to collapse
i used this http://download.chainfire.eu/229/CF-Root/CF-Auto-Root/CF-Auto-Root-m0-m0xx-gti9300.zip and worked just fine
edit: i used the odin included inside the .zip and put the root file at PDA
If you have Mobile Odin, that's the easiest way. Used it to root MK6
I used CF Auto Root on the OTA update and it was fine.
Sent from my GT-I9300T using xda app-developers app
Excellent .. thanks guys. Was just a little worried with all the stuff have been reading about the latest 4.3 and Knox etc, that it might not be possible to root. I understand that the knox flag is now triggered, but to me that is not a prob, as don't really worry about the warranty
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
uglyjohny said:
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Do you have Knox in 4.3? Does rooting trip the Knox flag?
Knox isnt part of 4.3 rom for sgs3.
Sent from my GT-I9300 using Tapatalk
uglyjohny said:
I rooted my 4.3 via cf root 6.4 but flashed it via odin. Unzip go to download mod put cf root md5 into pda and hit start. Than go to custom recoveri and flash su 1.8 update from sd card. Easy
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
was searching for a root method for 4.3
this method worked for me just fine!
Thank you!
where do u get the su 18.8 update, , noob question, but i need to get it
also tryed cf root , but the s3 is still not rooting,
i am using the gt-i9300 s3,
Shadow1109 said:
where do u get the su 18.8 update, , noob question, but i need to get it
also tryed cf root , but the s3 is still not rooting,
i am using the gt-i9300 s3,
Click to expand...
Click to collapse
Play Store
Mine will not root either just keep getting the same SU binary is not installed message. Any help please?
Re-download
swipermusic said:
Mine will not root either just keep getting the same SU binary is not installed message. Any help please?
Click to expand...
Click to collapse
Redownload Super SU will solve your problem.:good:
root not
People on my phone is not updated, it does when you restart the whole procedure but it does not have the superuser before I'd root but I had to reset the phone and he came back with 4.3 Direct can help me? S3 4.3 ZTO BRAZIL
My device is not rooted!!
Hi, i installed Imperium v23.2 today and when i tried to use Titanium backup it failed to load because there is no SU binary?
so i rooted my device again using CF Root V6.4 and the same problem presented, i uninstalled SuperSU updated it and no luck.
Any advice?
My Device is SG3 GT i9300 international version.
Sort it out
I found the answer and worked in this thread:
http://forum.xda-developers.com/showthread.php?t=2393500
i flashed the 4.3 superuser.zip and worked for me.
Cheers:good: