Hi,
Good day.
I have aoson M19 tablet and I forget my password
I download the latest firmware ICS 4 from szaoson.com and download the flash tool from the same site, then I did the below:
1 - I connect the tablet to the laptop and the tool identified the tablet.
2 - I select the firmware.
3 - I clicked on upgrade button but I got an error "Check chip Fail".
4 - I clicked on the restore button and I got the same error.
now, the device is not turning on I cannot see anything in the screen BUT I can connect to the tool.
Please help me
Thanks in advance.
The firmware was wrong I installed m11 firmware and it worked fine
Sent from my GT-P6200 using xda app-developers app
Oracle1977 said:
The firmware was wrong I installed m11 firmware and it worked fine
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
Can you do this please.. Check if you have sound.. I installed M11c Android4.1 too and now I have no sound out or mic sound in. I have the M19G RK3066
Yes sound is OK....but I did not check the microphone.
The device I had may not be 3g
Sent from my GT-P6200 using xda app-developers app
Related
Hii i am new to s3
So can anyone guide me
How to install jellybean without rooting
???
Ballack94 said:
Hii i am new to s3
So can anyone guide me
How to install jellybean without rooting
???
Click to expand...
Click to collapse
1. Disconnect your phone from the computer
2. Start "Kies" update to latest version (if reqd)
3. Click "Tools" -> "Firmware Upgrade and Initialisation"
4. Enter "Model name" = GT-I9300 and click "OK".
5. Enter "Serial Number" on next screen and click "OK". (The Serial no. can be found on the sticker in the battery compartment. Eg: S/N: XXXXXX)
6. Click "OK" on next screen
7. The next screen will display the Firmware version {PDA:LJ5 / PHONE:LJ1 / CSC:LI7 (INU)}. Click "OK" to proceed.
8. Wait a while till the system downloads firmware upgrade components
9. Follow the instructions on next screen, connect the phone & switch to "Download" mode, click the check box to accept that you have read the information and click "Start Upgrade" to start the process.
10. The latest firmware will be downloaded and phone will restart with LJ5 installed.
Thanks a ton
What is this odin ??
Is it like rom manager for samsung ?
Sent from my GT-I9300 using xda app-developers app
Odin is windows software which you use to flash updates.
Firstly download the stock jb firmware of your choice. You will also find odin in the same download
Sent from my GT-I9300 using xda premium
Ohhhkay
To use odin
Should s3 needs to be rooted ???or without i can use it
Sent from my GT-I9300 using xda app-developers app
dibyajyoti said:
1. Disconnect your phone from the computer
2. Start "Kies" update to latest version (if reqd)
3. Click "Tools" -> "Firmware Upgrade and Initialisation"
4. Enter "Model name" = GT-I9300 and click "OK".
5. Enter "Serial Number" on next screen and click "OK". (The Serial no. can be found on the sticker in the battery compartment. Eg: S/N: XXXXXX)
6. Click "OK" on next screen
7. The next screen will display the Firmware version {PDA:LJ5 / PHONE:LJ1 / CSC:LI7 (INU)}. Click "OK" to proceed.
8. Wait a while till the system downloads firmware upgrade components
9. Follow the instructions on next screen, connect the phone & switch to "Download" mode, click the check box to accept that you have read the information and click "Start Upgrade" to start the process.
10. The latest firmware will be downloaded and phone will restart with LJ5 installed.
Click to expand...
Click to collapse
Is this 4.1.1 or 4.1.2?
Sent from my GT-I9300 using Tapatalk 2
TheSkyKnight said:
Is this 4.1.1 or 4.1.2?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It's for 4.1.1
You'll need to install 4.1.2 through Odin, not Kies.
Sent from my GT-I9300 using xda app-developers app
For odin i my phone needs to be roooted
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
For odin i my phone needs to be roooted
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
No. It does not have to be rooted to flash through Odin.
Sent from my GT-I9300 using xda app-developers app
Oomahey said:
It's for 4.1.1
You'll need to install 4.1.2 through Odin, not Kies.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Official update is out?
Sent from my GT-I9300 using Tapatalk 2
TheSkyKnight said:
Official update is out?
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
It WAS out. Samsung withdrew the update.
http://forum.xda-developers.com/showpost.php?p=34262796&postcount=20194
Not sure, but I think you can only install through ODIN now. Never used Kies to update.
http://forum.xda-developers.com/showthread.php?t=1646610
Should i go for it official jelly bean
Or stay on 4,0,4
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
http://forum.xda-developers.com/showthread.php?t=1646610
Should i go for it official jelly bean
Or stay on 4,0,4
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Don't go for it. It is a battery hog.
I suggest you go for the ELK4 ROM. JB 4.1.2 Muuuuuuch better battery backup and newer JB version. Multi-window and Note 2 gallery!!
GPS does not work for me and few others but I am yet to come across any other issues.
Whee is it ?? Cannot find here ??
Can give me link
Sent from my GT-I9300 using xda app-developers app
Ballack94 said:
Whee is it ?? Cannot find here ??
Can give me link
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Cannot find!? What are you talking about? It is on the first page of SGS3 General page.
http://forum.xda-developers.com/showthread.php?t=1835931
hi, salam to everyone . I got my s3 about 3 months ago. everything is fine until today. I got jelly bean about a month ago and install an official one from Samsung kies. today I just want to check any software update for this purpose I go to settings then about device then software update. . but can't check as it shows "your device have been modified so no updates " . . I again go to about device section and click on Status and scroll down to device Status and it shows modified.
I don't know how all just happens.
I have bought an international version of S3 pin pack, break seal with my own hands. .
didn't ever installed any thing other than some basic apps from google play.
before getting jelly bean I can check updates from my s3 but now I can't. . plz help.
no 3rd party apps installed !
your phone rooted?
Sent from my GT-I9300
freddy1991 said:
your phone rooted?
Sent from my GT-I9300
Click to expand...
Click to collapse
no man . never !
See identical post in General section .
jje
Will u plz send me the link of that specified thread. Thanx
Sent from my GT-I9300 using xda app-developers app
Babar.ali said:
Will u plz send me the link of that specified thread. Thanx
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Just ODIN the lastest Jelly Bean (4.1.1), not the 4.1.2 leak and you should be good to go
How to do it. . If done Odin, my device will be rooted or not?? Sory for noob question I am totally new to Android
Sent from my GT-I9300 using xda app-developers app
flashing stock 4.1.1 via Odin won't root your phone
but don't flash 4.1.2 coz it is pre-rooted
Sent from my GT-I9300
sd card
Remove the external sd card and reboot. Check for updates again. It should solve your problem.
Hit thanks if I have helped.
No it didn't help. . . Still same. Now planning to concentrate on flashing option. Thanx awl
Sent from my GT-I9300 using xda app-developers app
I am happy as my problem exist no more,
Before going for flashing option, by chance I get my device encryted and encryption works!
I don't know how but now everything is ok, back to normal, check my updates from device, it shows normal in device Status. Thanks to everyone.
Sent from my GT-I9300 using xda app-developers app
Babar.ali said:
I am happy as my problem exist no more,
Before going for flashing option, by chance I get my device encryted and encryption works!
I don't know how but now everything is ok, back to normal, check my updates from device, it shows normal in device Status. Thanks to everyone.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
i have the sam problem. how could you get your phone encrypted?
I unrooted my phone and flashed what I thought was stock when I checked it against my girlfriends everything seemed the same but once I done a *#1234# it showed my CSC unknown can I fix without root
Sent from my GT-I9300 using xda app-developers app
tonyt3rry said:
I unrooted my phone and flashed what I thought was stock when I checked it against my girlfriends everything seemed the same but once I done a *#1234# it showed my CSC unknown can I fix without root
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
you can fix it by using the search button , already answered 10 times...or for you:
try to reflash the rom, that worked for me, otherwise you can try the CSC changer from the market, but be careful as it will format your rom & sd card. In general CSC unknown is not a big issue (at least it was not for me, anything worked just fine).
If I was at a desktop computer id have used the search feature it also let's me know if I have dupe thread mobile app doesn't let me know. I'll try flashing stock ROM but the one I used didn't have a CSC but im sure I can find out how to do it
Sent from my GT-I9300 using xda app-developers app
Yes reflash the firmware. It worked for me too.
Sent from my Galaxy Nexus using Tapatalk 2
Hello
So I changed my Rom that was meant for a mt6575 and my modem (a mt6620, wifi, fm radio, bluetooth camera) does not work either..
when I try to flash via CWM it says "ro.product.device error" or if I try with SP flashtool it says that the ROM im trying to install is for ,mt6577
I need to trick CMW or SP flashtool to think that my device is a mt6577 (actually it is) to install his proper ROM
Any help is appreciated
anyone?
Try flashing with Odin multitool that will work with the right settings file try searching your forums for it.
Sent from my GT-I9001 using xda premium
xdroidify said:
Try flashing with Odin multitool that will work with the right settings file try searching your forums for it.
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
but will odin work with my mt6577 device? odin only work with samsung devices
one more tip
I just find out that I need to flasy my MODEM mt6620 or baseband in order to get wifi, bluetooth and fm radio working..
is there a way to do that?
Can you build a rom?
Sent from my GT-I9001 using xda premium
Hello all again,i saw that many people want to add callrecording feature in stock phone app itself
you are changing the subject and spamming this forum
Sent from my GT-I9001 using xda premium
xdroidify said:
Can you build a rom?
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
sadly I have no skills in android programming
nevertheless I tried changing build.prop but no results
try flashing the rom with adb, can you set that up? another question: can you still boot it and connect it to your pc with usb?
Sent from my GT-I9001 using xda premium
Hi I am new to this so sorry if im posting in the wrong place or not doing something right XD.
anyway I have an asus tf300t tablet that is stuck on the boot screen that says this device is unlocked on the to left. I originally had ICS on it then tried to upgrade it to JB and it was working alright but was acting weird it said i was rooted but i couldnt run rooted apps. Well I decided to do a wipe in the settings option and then after that I was stuck on the boot screen. I am unable to get into recovery i originaly had clockwork i think and i can get into apx mode but my desktop will not find my device i tried using that naked driver my computer drivers see it but everytime i use apx or fastboot it says waiting for device.
that being said anyone have any idea to help me without sending it asus because i know ima have to pay for a new motherboard that seems to be the answer to everything when you send it in.
thank you =]
Just flash any firmware if it got stuck on the bootloop
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
Just flash any firmware if it got stuck on the bootloop
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Could you help me with that? I tried couple different ways and I am unable to do so
Like download a ROM and android firmware and then flash any one of em
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
Like download a ROM and android firmware and then flash any one of em
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I am unable to figure out how to do that once i download the rom and firmware i am unable to do anything from the tablet except to get into apx mode