I tried update firmware via KIES yesterday (4/4/2013) and I got an error and the troubleshooting options were
1. Remove battery
2. put it back
3. turn phone on
4. connect to pc
5. try again
I tried updating twice and same thing happened. So I now want to upgrade via Odin. Can anyone link me to official Indian firmware so I can download it and use it for flash on odin.
Download all stock firmwares from sammobile.com.
Be warned that flashing via Odin is not for beginners. If you do not know what you're doing, you could mess up your phone real bad.
"To err is human, to forgive is divine"
Sent from my SGS II
Go to sammobile and search for the JB ROM ur looking for, download it
While the download is in progress, please make sure you read properly how to flash via ODIN (if not you can YouTube for a video guide )
Sent from my GT-I9100 using Tapatalk 2
I tried searching it in sammobile before posting. Could not find the firmware. Also yes I have rooted several devices and I am pretty sure about odin flash. So a link for the particular firmware would help me.
mrbadguy5 said:
I tried searching it in sammobile before posting. Could not find the firmware. Also yes I have rooted several devices and I am pretty sure about odin flash. So a link for the particular firmware would help me.
Click to expand...
Click to collapse
Here,
It is the link to SGS2 Indian JB firmware. It's direct from Sammobile.
http://www.hotfile.com/dl/201231560/cd08431/I9100XWLSK_I9100ODDLSA_INU.zip.html
Thank you soo much. Downloading it right now.
mrbadguy5 said:
Thank you soo much. Downloading it right now.
Click to expand...
Click to collapse
You could have atleast pressed 'Thanks' for the guy who searched and got the link for u..
Please add [SOLVED] to the title of ur post.
"To err is human, to forgive is divine"
Sent from my SGS II
Related
Hi,
I did not find a similar topic about so aim posting e new one.
I am trying to put a new ROM on my SGS 2 Plus 9105 with Odin, but something's not working. The attached picture shows the error.
I have tried on several computers, taht I have flashed previously roms on SGS2, NOTE, SGS3 and others.
KIES is stopped. I tried all the USB ports on multiple computers with all versions of ODIN.
If you have any other suggestions .....
I tried with most of the ROM-s sammobile and several in other sites, but the problem is always the same error.
If you have any other suggestions .....
I dunno about this device, have you seen anyone reporting succesful flashes?
There are a lot of ROM's in sammobile so i thing there shouldn't be any problem, but there is little information in the neto for this phone.
That's why I asked you, as it's new maybe there's something else to it.
Sent from the little guy
how about Odin3 v3.07, version above v3.04?
damn2010 said:
how about Odin3 v3.07, version above v3.04?
Click to expand...
Click to collapse
Please re-read the OP's post again mate. He has already tried all Odin versions.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Please re-read the OP's post again mate. He has already tried all Odin versions.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
o yeah, just want to help
Hi is there any Custom Rom for this device? Thanks
damn2010 said:
o yeah, just want to help
Click to expand...
Click to collapse
This device is not getting much support, I've only seen roots & stock flashs.
Sent from the little guy
Please help me!
I've a I9100 updated via Kies to Jelly Bean. I tried to root it but I used a wrong version, a one for the I9000G.
It worked for a while, but now it reboot for ever!!!
I downloaded the official Firmware from SamMobile and flash it (as PDA) by ODIN, but I didn't recovered, It bootloops again!
How can I solve this problem?
Is there a way to download the flash image (I didn't any backup prior to root ).
Thank you very much!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Please help me!
I've a I9100 updated via Kies to Jelly Bean. I tried to root it but I used a wrong version, a one for the I9000G.
It worked for a while, but now it reboot for ever!!!
I downloaded the official Firmware from SamMobile and flash it (as PDA) by ODIN, but I didn't recovered, It bootloops again!
How can I solve this problem?
Is there a way to download the flash image (I didn't any backup prior to root ).
Thank you very much!
Click to expand...
Click to collapse
Try reading this thread.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Try reading this thread.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
DareDevil73 said:
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
Click to expand...
Click to collapse
I've had the pleasure of owning a Samsung smartphone since October 2010. With that, please trust me when I say this: Kies is rubbish! The amount of stuff this program installs into your PC to do what's easily done by connecting via Mass Storage mode? Nuts! The amount of time it spends trawling the net and using up vital battery power while it runs in background on your phone? Insane! The best way to have a i9100 (or any other Android device) running is with a custom ROM - that way you can at least remove any app or 'bloatware' you don't want before you bring the phone to life.
My advice? In short: totally clean out and factory reset your phone, flash the stock i9100 SamMobiles JB release using Odin, root your phone, choose a custom ROM that you like the look of, flash it in and then discover the brilliance of the i9100 that lies beneath the stock standard offering...
djshotty said:
I've had the pleasure of owning a Samsung smartphone since October 2010. With that, please trust me when I say this: Kies is rubbish! The amount of stuff this program installs into your PC to do what's easily done by connecting via Mass Storage mode? Nuts! The amount of time it spends trawling the net and using up vital battery power while it runs in background on your phone? Insane! The best way to have a i9100 (or any other Android device) running is with a custom ROM - that way you can at least remove any app or 'bloatware' you don't want before you bring the phone to life.
My advice? In short: totally clean out and factory reset your phone, flash the stock i9100 SamMobiles JB release using Odin, root your phone, choose a custom ROM that you like the look of, flash it in and then discover the brilliance of the i9100 that lies beneath the stock standard offering...
Click to expand...
Click to collapse
I agree with you, but there is a reason why I have to keep my phone with original software.
Is there a way to make it compatible again with Kies updates?
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Thank you very much, but I've already solved my problem flashing an unbranded original firmware.
Now I've got only a problem : the updates via Kies are no more available. Why? The firmware is a stock firmware!
Click to expand...
Click to collapse
U have already upgraded to official jellybean right?
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
U have already upgraded to official jellybean right?
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Yes I do.
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
Yes I do.
Click to expand...
Click to collapse
Then how can u possibly get any more updates? u already have JB right..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Then how can u possibly get any more updates? u already have JB right..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
I mean "future updates" of course!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
I mean "future updates" of course!
Click to expand...
Click to collapse
Future updates?
Good luck with that!
Please add [SOLVED] to the title of ur topic...
"To err is human, to forgive is divine"
Sent from my SGS II
DareDevil73 said:
I agree with you, but there is a reason why I have to keep my phone with original software.
Is there a way to make it compatible again with Kies updates?
Click to expand...
Click to collapse
Yes, install a Samsung-based custom ROM.
As for a reason why you have to keep your phone with Original software, is it a phone supplied by your employer? If so, then it's Yours to do as you please with, because use of the device is part of your salary package. Other than that, all which is altered by installing a custom ROM can be restored, simply by doing a nandroid backup of the original firmware before installing the new ROM...
immortalneo said:
Please add [SOLVED] to the title of ur topic...
Click to expand...
Click to collapse
How can I edit the title?!
Re: [Q] Urgent help me! Brick phone!
DareDevil73 said:
How can I edit the title?!
Click to expand...
Click to collapse
When you press edit post, press on "Go
Advanced." There you go.
"To err is human, to forgive is divine"
Sent from my SGS II
- SOLVED - (Thanks to immortalneo )
Hello, noob here D:
Here's the story.. I recently got a Galaxy S2 i9100. It's updated to the 4.1.2 thingy.
Tried to root it, used odin and CF-ROOT v5.5 in the process. Odin said it was OK but I got stuck on the yellow triangle.
Found a guide, guide said to install Stock Rom.. so I did. (Stock rom is I9100XWLPU_I9100XXLQ6_I9100XEZLP3_HOME.tar )
Now there's no yellow triangle but it's stuck on the flashy S screen.
I never had a smartphone, and I don't understand most of the words people use here (mainly that 'flash it' thing xD )
I tried to look for a post or anything to solve this but kinda failed..
Help?
What you have is called a 'bootloop' mate.. it can be sorted out.
Which android version do u have now? Its 4.0.4 right? 4.0.4 is subject to risk of eMMC Brickbug.
So, I suggest you download another stock firmware (other than 4.0.4) and flash it via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
What you have is called a 'bootloop' mate.. it can be sorted out.
Which android version do u have now? Its 4.0.4 right? 4.0.4 is subject to risk of eMMC Brickbug.
So, I suggest you download another stock firmware (other than 4.0.4) and flash it via Odin.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Thanks for the reply :good:
about the version.. I'm pretty sure I mentioned it was 4.1.2 xD
So all I have to do is download a stock firmware that's for my version and flash it?
DaN00b said:
Thanks for the reply :good:
about the version.. I'm pretty sure I mentioned it was 4.1.2 xD
So all I have to do is download a stock firmware that's for my version and flash it?
Click to expand...
Click to collapse
U mentioned 4.1.2. You also mentioned flashing stock firmware XWLPU, which is 4.0.4.
Yes, simply download a 4.1.2 firmware for ur region from sammobile.com and flash via Odin.
If it still bootloops, boot to recovery and do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
U mentioned 4.1.2. You also mentioned flashing stock firmware XWLPU, which is 4.0.4.
Yes, simply download a 4.1.2 firmware for ur region from sammobile.com and flash via Odin.
If it still bootloops, boot to recovery and do a factory reset.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Hmm okay, thanks a lot : )
Just a final question.. I got my phone from Russia but I live in a different place.. does it affect the firmware I need to download?
Nvm! I'm pretty sure I found the firmware I need. If I have any other questions, I'll ask
Thanks again : )
DaN00b said:
Hmm okay, thanks a lot : )
Just a final question.. I got my phone from Russia but I live in a different place.. does it affect the firmware I need to download?
Nvm! I'm pretty sure I found the firmware I need. If I have any other questions, I'll ask
Thanks again : )
Click to expand...
Click to collapse
Nope, it doesn't matter which region's u download.
Do let know what happens.
And please add [SOLVED] to the title of ur post if u succeed.
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Nope, it doesn't matter which region's u download.
Do let know what happens.
And please add [SOLVED] to the title of ur post if u succeed.
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
Okay, the problem is solved
After flashing the stock rom, had to wait a little bit at the boot screen but it moved on and now everythings alright.
Thanks for the help
And ofc, added the [solved] thingy
Hi friends
am new to s2 community
my Wifi is not working,am not able to turn it ON .. rooted and tried different custom roms, still problem persists
can someone pls give me the link of Latest Firmware with all partitions PIT+Bootloader+PDA+Phone+Csc files not single ".tar" file update
because already downloaded many stock ROM but all are single packaged ".tar" files ... i want to reset everything and give a try pls help friends
Thanks
dude this thread is even sticked and you don't even see it
but yeah click on it:silly:
Go to sammobile and investigate.
KingOfDope said:
dude this thread is even sticked and you don't even see it
but yeah click on it:silly:
Click to expand...
Click to collapse
thanks for replying bro
i hav asked for full package not update
the thread which u suggested has the firmware with Only "PDA" file
i want PIT+Bootloader+PDA+Phone+Csc files as a package and not a single ".tar" file
i think am making it clear
revanth22 said:
thanks for replying bro
i hav asked for full package not update
the thread which u suggested has the firmware with Only "PDA" file
i want PIT+Bootloader+PDA+Phone+Csc files as a package and not a single ".tar" file
i think am making it clear
Click to expand...
Click to collapse
I think SamMobile (YOU MUST REGISTER) has that option, just choose your device and your country and it will give you a download option, I don't know if they give you the PIT+BOOTLOADER+PDA+PHONE+CSC files, but if you don't see them, try to unpack it maybe it is inside :highfive:
Search for 'jb leak' mate. It comes as a 3 part firmware. I think its XXLSJ.
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Search for 'jb leak' mate. It comes as a 3 part firmware. I think its XXLSJ.
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
i will look for sure ..... Thanks a lot Bro
KingOfDope said:
I think SamMobile (YOU MUST REGISTER) has that option, just choose your device and your country and it will :highfive:
Click to expand...
Click to collapse
already tried many firmwares from sam but no luck
Hi every body
i have updated galaxy s2 gt9100 by odien but it field and now its just keep showing my this (mobile connecting to PC pic) but the good thing when i plug in the capel the odien sees it and can download the flash but still fails any help plzzz...
Look up @Hopper8's Odin troubleshooting guide here on XDA.
"To err is human, to forgive is divine."
Sent from my SGS II
Wesam-syria said:
Hi every body
i have updated galaxy s2 gt9100 by odien but it field and now its just keep showing my this (mobile connecting to PC pic) but the good thing when i plug in the capel the odien sees it and can download the flash but still fails any help plzzz...
Click to expand...
Click to collapse
Are you able to go into recovery mode?
From, the thread title: 'Help with my galaxy s2, its not geting download mode or recovery'.
Reading not a strong point ?
We all have bad days mb. @Jeetu has done a lot for the s2. :thumbup:
Jeetu said:
Are you able to go into recovery mode?
Click to expand...
Click to collapse
yea now im able to open download mode after i flash the ClockworkMod-Recovery_6.0.2.9 ..
but each time i try to flash it, it fails even i try 4.1.2 and 4.0.4 roms
any help with it??
thanks alot
if u can tell me what it means this when i go to download mode it says : custom Binary download yes( 4 counts)
It fails when you flash via Odin? Have u checked the odin troubleshooting guide yet?
Custom binary downloads = custom ROM installs
"To err is human, to forgive is divine."
Sent from my SGS II
Don't flash 4.0.4 pls. Brick bug is not a good thing.
thanks all
i have flash it by odin 1.85 and the rom is 2.3.5.. all ok and done
but how to upgrade it to 4.0.4?
You don't. Forget 4.0.4
If you really want ICS go for 4.0.3
Flash with Odin the same as GB you just flashed. Or root your gb rom and use mobile Odin pro to flash it.
andrewwright said:
Don't flash 4.0.4 pls. Brick bug is not a good thing.
Click to expand...
Click to collapse
thanks alot but what about 4.1.2??
immortalneo said:
It fails when you flash via Odin? Have u checked the odin troubleshooting guide yet?
Custom binary downloads = custom ROM installs
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
i really need some help now
i have just finished the flashing by odin and it works well
but i have did all that to remove to password of the my s2 and now when i put my sim card back it asks for the pass word again
i took the sim card out but still asking for the pass even when i enter the recovey mood to wipe data it asks for the pass word!!!
Reflash . what rom /firmware are you on now?
andrewwright said:
Reflash . what rom /firmware are you on now?
Click to expand...
Click to collapse
thanks
its 2.3.5 now
Wesam-syria said:
thanks
its 2.3.5 now
Click to expand...
Click to collapse
man donno if i sound like stupid with this But i was reading in this page http://forum.xda-developers.com/showthread.php?t=2199288
i downloaded kernal and i have got Official Firmwares 4.0.4, when im trying to flash the kernal it fails and when
i try to flash the bootloader it fails even i really follow all the instructions step by step.
my only way to run my s2 again is to flash it via bootloader by using JB ClockworkMod-Recovery 6.0.2.9
then to flash the frimwares again with 2.3.5 via pda !!
totaly lost.
Am lost too..! That link u provided is meant for the I9100G right?
"To err is human, to forgive is divine."
Sent from my SGS II
immortalneo said:
Am lost too..! That link u provided is meant for the I9100G right?
"To err is human, to forgive is divine."
Sent from my SGS II
Click to expand...
Click to collapse
You're right :thumbup:
Op you're trying to flash something not meant for you're model. In first post you state you have an i9100 ? As @immortalneo has pointed out the thread you have posted is for the i9100g! Stop flashing and start reading mate or you will end up with a phone that don't work. :thumbdown:
true man problem solved
andrewwright said:
You're right :thumbup:
Op you're trying to flash something not meant for you're model. In first post you state you have an i9100 ? As @immortalneo has pointed out the thread you have posted is for the i9100g! Stop flashing and start reading mate or you will end up with a phone that don't work. :thumbdown:
Click to expand...
Click to collapse
true but i have learned ,, i was flashing JB when i should flash IC for it
i have service center u know and i really get lost sometimes
thank u all very much for ur following
im learing alot from u ppl
Wesam-syria said:
true but i have learned ,, i was flashing JB when i should flash IC for it
i have service center u know and i really get lost sometimes
thank u all very much for ur following
im learing alot from u ppl
Click to expand...
Click to collapse
If you download and flash from that thread "i9100g thread" you will break you're phone weather it be ics or jb. Pls just make sure you flash the right ROM for you're model. Were here to help but you need to help yourself too. :thumbup:
thanks brother
andrewwright said:
If you download and flash from that thread "i9100g thread" you will break you're phone weather it be ics or jb. Pls just make sure you flash the right ROM for you're model. Were here to help but you need to help yourself too. :thumbup:
Click to expand...
Click to collapse
well donno but my mobile is S2 I9100
i have downloaded 4.1.2 from tsar3000 and flash it as well.. and mobile returned to hes owner
but still i didnt get the idea what the problem with that thread? i mean its talking about same model right?
i have downloaded the kernal from it but the mobile didnt take it... im reading the thread again i hope i'll get ur point.
ty