Hello everyone!
Today with the help of the developer of Link2sd, Mr. Bulent Akpinar I managed to install Link2SD using a ext3 partition on my Milestone XT720 (USA).
I AM NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR PHONE
A)
You have to be rooted, use Universal Androot:
http://forum.xda-developers.com/attachment.php?attachmentid=378559&d=1281616832
B)
Then partition sdcard using Minitool Partition Home Edition:
*All partitions created have to be Primary partitions*
I) Create FAT32 partition
II) Ext3 (to avoid problems make not bigger than 512 mb)
III) Linux Swap (not necessary)
*After creating those partitions "Flag" or "Label" FAT32 partition as *Boot*.
C)
I used Root Explorer
D)
Download ext3.zip.
E)
1)Extract ext3.zip file and copy files to /system/lib/modules/ using Root Explorer -make sure when using Root Explorer you have enabled Mount R/W button.
F)
Edit install-recovery.sh at /system/etc exactly like below:
#!/system/bin/sh
#added by link2sd
sleep 2
insmod /system/lib/modules/jbd.ko
insmod /system/lib/modules/ext3.ko
mount -t ext3 -o rw /dev/block//vold/179:2 /data/sdext2
mount -t ext3 -o rw /dev/block/mmcblk0p2 /data/sdext2
****Again, use Root Explorer, it has a Text Editor****
Sorry for stressing so much the use of Root Explorer but other apps do not let you edit install-recovery.sh
I have provided my edited install-recovery.sh from stock rom. If you have other rom then try to edit yours first as install-recovery.sh may be different.
After all this changes, REBOOT your phone, and install Link2SD.
Enjoy!
Hi !
I have an application (CamScanner) with large amount of data (~8Gb). This app doesn't support transfering data do external SD card, so I checked mount -o bind command to bind directory with data stored on external SD to directory in /sdcard and it's working correctly. Question is where I can put this command so that system will run it at boot time after external sd card is ready. There is no /etc/init.d directory on my SGS2 (stock XXKI4). I prefer not to install any applications to perform such a simple task...
Thanks for help, regards !
slig said:
I prefer not to install any applications to perform such a simple task...
Click to expand...
Click to collapse
I think you have no choice, as stock kernels do not have init.d support. You'd need to go down the route of either using an app to run a script on boot, install a kernel with init.d support, or stick with your current method of manually running a script when you need to use the app.
Also, you could try asking the developers kindly to allow saving to external_sd. There's an Email Developer link on the Android market, and a Contact Us link on their website
Thanks for response. I found script named init.rc located in "/", it has several mount commands inside, wonder if it can be used...
Also discovered that app Tasked has ability to run shell scripts with root privileges (at boot or at application start). I suppose I have to put this shell script in /system because in /sdcard owner permissions cannot be set so that file cannot be modified (vfat does not support that) and a security hole would be created...
I think that I'll also ask developer for this feature as You suggest.
slig said:
Thanks for response. I found script named init.rc located in "/", it has several mount commands inside, wonder if it can be used...
Click to expand...
Click to collapse
Everything in "/" is initramfs, a volatile ramdisk changes to which would be lost
on reboot. Only exception are directories in which actual partitions are mounted,
like /system and /data (you can check which directories with "mount" command).
Have you tried just using symbolic link?
INFO
This may be the best solution, try something like:
Code:
mkdir /sdcard/AppFolder
ln -s /sdcard/AppFolder /data/data/com.your.application.data.folder
Just in case you don't know, you can execute those command using
Terminal Emulator. You were considering modifications to /, so I guess you already have root.
Yes, I have rooted my SGS2 via ZergRush.
I didn't know that / is volatile initramfs, thanks for that information.
As for symbolic link - unfortunately on my stock ROM both /sdcard and /sdcard/external_sd filesystems are vfat and don't support symbolic linking. Only working way I discovered is bind mount.
In my case, I have the following:
mount -o bind /sdcard/external_sd/CamScanner /sdcard/CamScanner
And application runs OK, all data is accessible and doesn't consume internal flash memory.
I'll take a look how hard would be to write some small application to do just this task - define some pairs of source and target directories and mount - bind them at start.
I've somehow missed the fact that you're need redirection from /sdcard
to /sdcard/external_sd, I was thinking about symlink on /data...
Anyways, there another nice trick you can do - if you can devote your SD card
to this one application, then just edit /system/etc/vold.fstab to make SD card
mount in /sdcard/CamScanner instead of /sdcard/external_sd.
This only works for Roms which mount the system RW at boot.
Use link2sd (or similar)
List all apps
Sort by data size
Note the largest data folder name
Use Root Explorer
Go to data/data
Find the data folder
Move the folder to system/app
Press and hold folder
Select link to this folder
Go to data/data
Paste in link
Reboot.
Repeat for other apps if you have space. Leave some room for expansion.
Sent from my GT-S5830
Now that I'm running JB AOKP I've set Tasker to execute the following script at boot.
busybox mount -o remount,rw /system
This mounts system rw
Sent from my Galaxy NexAce!
Titanium Backup i do not see my ext 2 split card.
FAT32
ext2
If you use Link2SD see ext2.
Titanium Backup can not be displayed.
Does anyone have a solution?
Try removing and re-inserting your SD Card. Or maybe wiping cache and Dalvik Cache in Recovery. It may help.
OK.
I need to know what script I have it mounted in sdext2
Titanium but it requires to ,,sd,, and then must use this command:
ln -s /data/sdext2 /data/sd
What do I need to connect the SD card data/sd
Only insert script in init.d ?
And what ?
Code:
We created:
#!/system/bin/sh
#mount sd for a2sd
mount -t ext2 -o rw /dev/block/vold/179:2 /data/sd
mount -t ext2 -o rw /dev/block/mmcblk0p2 /data/sd
I have a xperia u, which has not external SD card slot..
Data partition is MUCH bigger than what I need (I'm using 500mb of 2gb) and I want to move obb files to data partition to free some space in SD partition..
Is that possible?
You might try to move the file to the data partition and then create a symlink where the file was originally.
From a shell with root access:
# ln -s /your/data/partition/filename.obb /original/place/filename.obb
I'm doing the same moving apk and dalvik-cache but I have the problem that after reboot files are still there but the app is disabled.
You can check it here: http://forum.xda-developers.com/showthread.php?t=2597924
I would suggest to try it on an app that it's not important for the system and I don't assume any responsability
P.S.
partition where you create symlink must be ext2/3/4
I think I understand how this works.. Lets say symlinks are some kind of 'windows direct access' for files that can be recognized by the system.. Am I right?
How can I figure out what format are my partitions?
I want to move /mnt/sdcard/Android/obb/com.package.name/file.obb to /data/data/com.package.name/file.obb
Assuming that partitions are in the correct format, I'll have to move files with a root file browser, then connect phone with debug on and type this:
-adb shell
-su
-ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
Is that ok?
Yest that's the use, I don't know about "windows direct access" because I'm linux user
To check how is your partition formatted there are different ways from console but I just tried this app and it works:
https://play.google.com/store/apps/details?id=com.cls.partition
If both partitions are ext2/3/4 remember also to set the same user, group and permissions, you can do that copying the file from shell.
The whole sequence should look like this:
Code:
$ adb shell
$ su
# cp -a /mnt/sdcard/Android/obb/com.package.name/file.obb /data/data/com.package.name/file.obb
# rm /mnt/sdcard/Android/obb/com.package.name/file.obb
# ln -s /data/data/com.package.name/file.obb /mnt/sdcard/Android/obb/com.package.name/file.obb
cp - a to copy preserving permissions and rm to remove the file.
/data is ext4.. /mnt/sdcard is vfat D=
No symlink then
I never used it but you can still mount bind folders (not files) in fat, something similar to symlink:
Code:
$ adb shell
$ su
# mkdir /data/data/com.package.name/obb/
# cp -a /mnt/sdcard/Android/obb/com.package.name/* /data/data/com.package.name/[B]obb/[/B]
# rm -r /mnt/sdcard/Android/obb/com.package.name/*
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/com.package.name/
if it works you need to find a way to excute that on boot maybe with a init script.
And if there is not crucial data you could even bind all the obb folder together like:
Code:
# mount -o bind /data/data/com.package.name/[B]obb/[/B] /mnt/sdcard/Android/obb/
You can also check this thread:
http://forum.xda-developers.com/showthread.php?t=1410262
Double check everything because I never tried it
Is it possible to add init.d support to my current rom and execute a sh file from it to initialize bind on boot?
No idea sorry
You can try asking in your phone section: http://forum.xda-developers.com/xperia-u
I found how to add init.d support!
Not sure if it works for any device/rom/kernel, but it worked for my Xperia U with GingerBeanSS v3.5 (Sony GB based)..
If anyone is interested, go to this link: http://forum.xda-developers.com/showthread.php?p=32716432
Now I suppose I can create a "BindOBB.sh" with the script you mentioned before in any place of /system, and make a "bindobb" file in /system/etc/init.d/ to execute that script..
So theoretically binding folders should work on every boot!
I used windows my entire life.. I'm not completely sure about linux scripts..
Sorry about making so much questions!
I really appreciate your help!
No problem I'm glad if I can help.
Init script is usually named starting with two numbers like: 00script, 20script, 99script that should give the order scripts are excuted.
For the script itself you need to follow the sample you donwloaded so it will be something like this:
Code:
#!/system/bin/sh
#Comment
busybox mount -o bind /data/data/obb/ /mnt/sdcard/Android/obb/
This is to mount all obb folder or, if you want to mount only some, you can write them all in the script or keep a list of packages in another file and make the script read that.
Remember to make a backup and you might try first with only one package
Ok, I've understood everything (thanks google! ) and done it..
mount -o bind[...] isn't executed by init script.. Maybe a syntax error as it is my first time doing it..
The same command (without 'busybox' at first, of course) seems to work via ADB, because in SolidExplorer when I go to obb folder BEFORE running the script it is empy, but after running it all packages' folders and files appear!
Now problem is that when running a game that need obb data, it closes by itselfs (no FC nor 'missing data' warning)..
Same problem with a 3rd party TTS engine that needs obb data too..
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
NeriL said:
I want to move /mnt/sdcard/Android/obb/ to /data/data/
Click to expand...
Click to collapse
you can easy create a directory bind using luckypatcher with the folder with obb and the folder where you would like to put it
remember to reboot or rescan your sd else it wont work
i use it to play asphalt and fifa
MrCrayon said:
The first problem could be that when you try to execute the command partitions are not mounted yet. Check 00 script used to test if init is enabled to mount them.
Another solution could be to use a sleep command to make the script wait some seconds but the first one should do the trick.
For the second problem check permissions. You copied files as root so you need to be sure the apps can access those files as well, in fat system there is no use of users, group and permissions but moving to ext you need to check that.
To be sure you can set obb folder and all files an directories inside as 777 (rwx for all)
Let me know if it's working
Sent from my ZP980 using Tapatalk
Click to expand...
Click to collapse
I deleted my custom init script and wrote following command at the last line of '00test' script:
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
Mount then worked fine
(By the way, my custom script was named '99bindobb', so it was supposedly executed after everything else)
Also checked permissions: /data/obb/ and com.package.name folders inside it were rwxrwxrwx, but files inside were rw-------!
Changed permission of files to rwxrwxrwx..
Now everything works flawlessly at each boot!
Thank you so much! =D =D
You saved about 500Mb of my 4Gb!
And also I learned a lot about linux scripts, busybox and file system permissions!
You are welcome
For the 99 script that only define the order between the user init scripts so it still depends when they are called during boot.
Enjoy the power of Linux
Sent from my ZP980 using Tapatalk
Hi MrCrayon..! I'm here again
I changed rom and did the same as before to use /data insted of /mnt/sdcard for apps files..
This is exactly what I did:
I copied the script I used to sd (my edited 00test), changed rom (switched from Sony based GB rom to Sony Stock ICS rom), added init.d support (/data/Test.log indicates that it works), copied script to /system/etc/init.d/, changed script permissions to 777, created folders /data/AndroidData/ and /data/obb/ with 777 permissions and moved files from sd folders to custom folders in /data..
Finally updated busybox just in case
Script doesn't work, but executing 'mount -o bind' commands from ADB does! How can I fix that?
This is my init script:
#!/system/bin/sh
#Init.d Test
if [ -e /data/Test.log ]; then
rm /data/Test.log
fi
echo Ryuinferno @ XDA 2013 > /data/Test.log
echo Init.d is working !!! >> /data/Test.log
busybox mount -o bind /data/obb/ /mnt/sdcard/Android/obb/
busybox mount -o bind /data/AndroidData/ /mnt/sdcard/Android/data/
busybox set_perm_recursive(0, 0, 0777, 0777, /data/AndroidData, /data/obb)