Cannot turn-on screen after sleep - Galaxy Tab 10.1 Q&A, Help & Troubleshooting

My p4wifi tablet cannot be turned on after turning the screen off with the power key. Actually, lock screen fells like opening, if I touch the location on the screen, where unlock button supposed to be, tablet vibrates and I can take an action. Although, there is nothing in the screen.
When I reboot my tablet, everything works fine until I lock my tablet and turn its screen off.
So far, I have found similar issues but they were more related to power button error or something else. Did anyone experience this problem? How can I solve this problem?

Related

Freeze on Screen Lock

Anyone else have this (I have the Korean SK model, E210S), sometimes it just freezes on the screen lock. Touch screen unresponsive, holding down the power button gets me the menu and then it seems to work. Just tapping the power button (to turn off the screen) doesn't work, home button doesn't work, etc. Never need to reboot, but it is irritating.

[Q] have all z2's got the touch screen wake issue or just done

Can anyone tell me is it currently all z2 tablets that have the issue or are some fine, if it is a fw issue then shouldn't all if them have the problem? I'm just in the middle if sending mine back for a replacement so just wondered.
Thanks
James
What do you mean by touchscreen wake issue? Double tap to wake not always working ? I know I sometimes needed to tap mine 3 or 4 times before it woke, in stead of two times. But I disabled the features since it seemed to be the main cause for my issue with occasional ignored touches. I haven't really noticed any ignored touches since I disabled it.
well if mine goes to display goes to sleep and i then either tap or press the power button to wake the tablet the screen sometimes either completely freezes and i have to really tap hard to the tap to be recognised, the screen also stutters about.
When was the last time you fully shut down and rebooted the tablet?
Is the severity of the problem different when double tap to wake is off compared to when it's on?
Does changing stamina mode options make a difference? Such as with the limited performance option on compared to off?
You have the latest (.402) firmware, right?
Yeh i am on .402, stamina mode is off, same thing seems to happen regardless if i double tap or press the pwr buttom, when it happens i then have to press the pwr buttom again to turn the screen off, i then press again to wake, and when i wake the 2nd time its back being nice and smooth again.
I'm basically having the same issues listed in the below topic which ive also replied in:
http://forum.xda-developers.com/showthread.php?t=2771676
james_lpool said:
Yeh i am on .402, stamina mode is off, same thing seems to happen regardless if i double tap or press the pwr buttom, when it happens i then have to press the pwr buttom again to turn the screen off, i then press again to wake, and when i wake the 2nd time its back being nice and smooth again.
I'm basically having the same issues listed in the below topic which ive also replied in:
http://forum.xda-developers.com/showthread.php?t=2771676
Click to expand...
Click to collapse
But have you tried disabling the double tap wake feature completely (in display settings) ?
And have you tried really powering off the device -not just turning the screen off, but holding the power button and choosing power off- leave it off for a minute and then power it on again ?
yes to bothm the double tap feature was off to start with when i was getting the issues, i turned it only only because i found it useful. i diont find the issues any different with it on or off.
also yes i do restart the tablet regularly, its not a constant issue it only seems to be if i allow the screen to time out.
anyway a new tablet has arrived today, i wont get to use it until later on though.hopefully it will be better.

K3 note screen replacement issues

Hello everyone
I replaced my lcd and digitizer because the touch did not working on the original screen of K3 note
I have the following problems
The screen works and touch also when i power up the device but when i lock the screen from power button the screen 8/10 times never turn on and i can see only the backlight, if i press multiple times the power button it will turn on finally but i never know when it will. If i remove the battery and turn it on again , everything works fine until i lock the phone. The phone works when it is locked by the way. Also if i press the power button to unlock the touch works but i can see only the back light no image.
I tried to lock and unlock the screen with gestures , same problem.
The weird think is that sometimes it turns on.
One think i forgot to mention is that sometimes when the screen turn on after pressing the power button i see black horizontal lines for some seconts(flickering) and then they dissapear
I tried a lot of different roms, i disconnected and connected again, never sleep mode with safe locker , i disabled the proximity sensor with x posed , i removed the sd card, nothing helped.
Can anyone suggest me something else to do?
Changing screen settings maybe? and how
Thanks a lot and sorry for my engish it is not my native language.

Screen blinking when powering the screen

My Tab S7 plus is behaving strangely in last few days. When my battery is over I think 25-30%, or when the tablet is connected to a charger, and when I press the power button (or double tap to wake) the screen blinks for a millisecond, it is also happening when you restart or power on the device, the screen blinks twice before the Samsung splash screen appears. But the strange thing is that it does not happen when the battery is below 25-30%, neither when powering or restarting the device or waking the device.
Is anyone else facing the similar problem? I tried to format the data, but the issue is still there. Thnx
Mine does that too, but I was only able to use for about an hour so ,I haven't had time to figure it out yet

Question Last few morning's my screen has been locked and can't swipe open

Hi, not sure if anyone else has had this issue.
It's only really been happening to me the last few mornings when I wake up.
My screen is blank, the top half (no clock showing) the bottom half shows the bottom half with the fingerprint and if I touch anything, it's just frozen.
My alarm has sounded while it's been like this, and it shows the slider to turn it off, but again won't actually slide when I try, so the alarm keeps sounding.
The only way i it responds normally is if I press the off button to turn the screen off, then press it again to turn it back on, and then it seems back to normal.
I can't think of anything I have installed recently that might be causing it?
Anyone got any ideas please?
Regards
James
Do you use goodlock and custom clocks on aod and lock screen?
I do use goodlock yeah, thinking about it, I did recently charge a setting for aod to wake up notifications. It's there a glitch with that do you know?
I have had my screen go black and wont respond to any presses. Then when pressing the powerbutton the screen shows the home and back button only but responds to nothing, except I can use the sidebar, click on calander for example and then it allows me to unlock. Did this a few times but has not done it again after a power off and on.

Categories

Resources