Hello,
I'm using Neo V , BB 77., Unclocked Bootloader and Rooted with DoomLords script.
I'm falshing the kernel with Flashtool in fastboot mode and after that going into recovery and Installing the ROM, and after installation is done, its not rebooting.. Phone keeps on Looping on SONY logo.. Also, if i have flashed kernel/rom i should see someother boot animation.
I knnow i have to wait for some time to boot, I waited for 30 mins to boot, but it dint. Finally i'm back to the same original FTF.
Any help on this would be thankful.
Put rom & gapps on sdcard first
Flash kernel [ for jb rom jb kernel ]
Go to cwm do all wipes...
Now install rom than gapps...
Flash modules also if ur kernel have it... Now reboot system..
Admins or Mods.. Please close this thread. I'm running on moAOKP now..
Figuredout the problem what i was doing wrong. I was doing hotboot from Flashtool.. On search i have found a thread..
http://forum.xda-developers.com/showthread.php?t=2174275 -- Thanks LoneWanderer!!
Signal Issues..
Till day it all looks good, but from lat 2-3 days im experiencing signal drop.. No Signal at all in a place where other mobiles are getting full signal.
Is this prob with Kernel or ROM?
Heard this also depends on governors and freq.
Need help on this, thinking to revert back to Stock after this issues. :|
Does any1 faced this kind of issue? Any help on this is highly appreciated.!!!
Post ur problem in related thread..
Ok. WIll ask in the ROM threads!!
Related
Hi, i'm new to this, and i need a bit of your expertise.
Right now i have MiniCM7 2.1.7 last update from original poster : nobodyatall
And nAa kernel
What i have to do to change for another rom ? like Paul-xxx's rom ?
I have to wipe data/factory reset and then install like the first one i did, will wi fi work with paul's room ?
I want to change room because this one uses a lot of battery, even all day basically idling.
I turned it on 7:30 AM and now it's 17:43 and there's only 54% left ...
Thank you
RayneRz said:
Hi, i'm new to this, and i need a bit of your expertise.
Right now i have MiniCM7 2.1.7 last update from original poster : nobodyatall
And nAa kernel
What i have to do to change for another rom ? like Paul-xxx's rom ?
I have to wipe data/factory reset and then install like the first one i did, will wi fi work with paul's room ?
I want to change room because this one uses a lot of battery, even all day basically idling.
I turned it on 7:30 AM and now it's 17:43 and there's only 54% left ...
Thank you
Click to expand...
Click to collapse
If u want to switch to another ROM follow these steps
1) download the *.zip (the ROM zip)
2) go into the recovery n flash it..
3)make a cache wipe n also a factory reset..
4)reboot ur from recovery
Ur done..
N wifi workin in paul-xxx's ROM depends on the ROM which it is check the details on resp thread.. (actually for paul-xxx's ROM's wifi is working except ICS as its in development..) happy flashin.. ;-)
thanks, i'm a bit confused about kernels and CWM , because:
When i installed the nAa kernel this " CWM " comes along with it and then i see this on the paul's thread :
Only 2.1.1.A.0.6 SE firmware
So, if i put back the original Kernel, i won't be able to use the CWM and therefore i won't be able to flash the paul's rom, and probably will have a bricked phone, because the rom that is on the phone is not compatible with SE original kernel ..
Am i thinking right here ?
Thanks a milion
RayneRz said:
thanks, i'm a bit confused about kernels and CWM , because:
When i installed the nAa kernel this " CWM " comes along with it and then i see this on the paul's thread :
Only 2.1.1.A.0.6 SE firmware
So, if i put back the original Kernel, i won't be able to use the CWM and therefore i won't be able to flash the paul's rom, and probably will have a bricked phone, because the rom that is on the phone is not compatible with SE original kernel ..
Am i thinking right here ?
Thanks a milion
Click to expand...
Click to collapse
U made me confused for a sec.. lol neways.. Its the 2.1.1.A.0.6 SE firmware not the kernel.. So what u can do is .. switch to the ROM (it will have its recovery) then flash a new kernel if u want (as for nAa kernel, any other ROM than his will not work with phone vibration(if not inbuild) n few feature.. So with other ROMs go with other kerneles like zp kernel, Fa kernel or which u like.. So first change the ROM then the kernel ul go good..
I'm still confused because it says this :
If you not 2.1.1.A.0.6, you need to flash FTF file via FlashTool.
PS: hacked bootloader is not needed. This kernel official. This kernel, it returns the firmware on 2.1.1.A.0.6
" this kernel official "
So what happens if i flash the stock kernel, and then the CWM goes away ? I can't then flash the paul's rom and the phone will not enter the OS because the OS i use does not suite for SE original kernel ...
ps. sorry for being such a noob and *****, but i just don't want to brick it.
Hello : All
Today i saw in here MT15i_4.0.2.A.0.62_(1246-9107).ftf file with wupload link. My Phone is Xperia Neo. I downloaded wupload link with MT15i_4.0.2.A.0.62_(1246-9107).ftf and wipe with flash tool but it's version of MT15i_4.0.2.A.0.62_(1246-9107).ftf is not complete and in almost finished appear flashing error.
I would like to ask can i wipe in my neo 4.0.1.A to MT15i_4.0.2.A.0.62_(1246-9107).ftf and what problem of i'm not successful flashing.
Here: http://sourceforge.net/projects/sea...s/MT15i_4.0.2.A.0.62_(1246-9107).zip/download you can find 652fw. So far I have no problem when use it with flashtool. Has alternative you can use Wotan services for free.
Hello : pedrofigo
Thanks for reply me back bro! I would like to ask next.Now i'm using my neo on 4.0.1.A but this firmware is some of the application working properly and (Need for Speed Shift & Hot Pursuit cannot play.Need for speed shift & all application can run when my original firmware 2.3.3 is ok but now 4.0.1.A is cannot run.
If i update MT15i_4.0.2.A.0.62_(1246-9107),can fix with that error???
Please reply to me bro!
For speed issues for gaming playing I am not the best to answer you but I assume you will need one of the Kerner that allows you to have best performance.
On the other way to install different kernels that not for stock fw you will need unlock bootloader. If you have unlock bootloader can try some options in Kernel that give you better performance. I am not a gaming enthusiast but I use NightElf Kernel and is very nice.
Hello : pedrofigo & all
Today when i installed NightElf Kernel, my phone is going down. At First xda Logo and finished sony ericsson logo but cannot go continue & stop with sony ericsson logo.I went & read in NightElf Thread with step by step but i have not successful.
Please tell and drive, what problem with somethings wrong my phone and how to install NightElf Kernel in my phone. Please Explain for me.
Best Regards,
ppaphyo
if you want more speed while gaming i definatly recommend you booting the knightelf kernel. REQS: rooted phone. Download the setCPU.apk file for this site and boot the knightelf kernel in fastboot. setCPU can make your phone from 1 to 1,8 mHz! But watch out, when you set from 1 to 1,8 mhz in one go you could cause overheating makes the phone death. So really be carefull with this
ppaphyo said:
Hello : pedrofigo & all
Today when i installed NightElf Kernel, my phone is going down. At First xda Logo and finished sony ericsson logo but cannot go continue & stop with sony ericsson logo.I went & read in NightElf Thread with step by step but i have not successful.
Please tell and drive, what problem with somethings wrong my phone and how to install NightElf Kernel in my phone. Please Explain for me.
Best Regards,
ppaphyo
Click to expand...
Click to collapse
Stock .62 + NightElf 9.0 is the best!!!
the problem with ur flashing error maybe from the cable, try to flash some and u will be succesful
Sory for my English @@
quachhanthanh said:
Stock .62 + NightElf 9.0 is the best!!!
the problem with ur flashing error maybe from the cable, try to flash some and u will be succesful
Sory for my English @@
Click to expand...
Click to collapse
I use inteks (conservative kernel but stable) and .69 fw and I get best performance benchmark ever at 1 ghz. And some tweaks and phone flyes.
recently i unlocked my bootloader and was using FeraLab v20 ROM with FeraKernel.
after that i flashed kCernel_v5_1036.ftf Kernel.
When the flash was complete i could not enter in recovery mode and phone booted to the fera v20 ROM.
then tried flashing recovery mode via flashtool but no help.
Then tried flashing FeraKernel which i was using earlier but flashtool gave me error each time i tried flashing it.
The error is in the image below.
so help me.... i dont know wht to do know... im getting frustrated a lot. cud not find any help from various threads.
Look...this kcernel isnt finished yet, i think...this is project in development...but, lets try to help you...
First download latest Flashtool 0.9.8.0. and install it.
Download SEUS and flash STOCK rom with it. That will install and Stock kernel. After that, root your phone again via Flashtool( new one). Than choose kernel (Ferakernel, Doomkernel) to flash if you don't want Stock one, or just flash Bootmanager v2 by Doomlord, (to get Xrecovery, CWM recovery, and Bootmanager) via flashtool to gain access to recovery modes.
thnxx mate for ur help.. i flashed stock rom via flashtool and everythng is back to normal.... thnxxxxxx for ur help..:good:
Please Help
Hi mate, i saw today your great rom, ***FeraLab*** v20 ~Final~ ROM
I have a Sony Ericsson Experia X10i, i already root my phone, i try to install u kernel fera kernel 2.7 but always happens this error, i try it everything but i cant install can u help me? this is the screen shot of the error
, because i try others kernels and install u room but wifi dont work, i hope u can help me regards.
Our give me an alternative to resolve my problem, because i without the correct kernel wifi dont work.... :crying:
lifeguardz said:
Hi mate, i saw today your great rom, ***FeraLab*** v20 ~Final~ ROM
I have a Sony Ericsson Experia X10i, i already root my phone, i try to install u kernel fera kernel 2.7 but always happens this error, i try it everything but i cant install can u help me? this is the screen shot of the error
, because i try others kernels and install u room but wifi dont work, i hope u can help me regards.
Our give me an alternative to resolve my problem, because i without the correct kernel wifi dont work.... :crying:
Click to expand...
Click to collapse
problem was that somehow my bootloader got locked again, and i had to unlock it again.
i unlocked it and installed kernel via flashtool and this error was gone..
first chk ur bootloader that it is locked or unlocked???
Hello guys, please forgive me if any of this has caused the slightest troubles to you
So,
i just rooted my phone a day ago and installed clockwork mod too...
i am a total newbie and don't know anything about this.... So i went searching for some custom mods for my sk17i or Xperia mini pro...
And i found one on this site http://forum.xda-developers.com/showthread.php?t=2102979
So then i installed it from the instructions given on most of the websites... i had a kernel of 4.1.b.0.587 on the phone and i don't even know much about flashtool...
Now the rom is installed or whatever it is but the UI has completely changed and it's not like the pics on the site... It's just completely black... And the worse part is that i can't even access my settings menu on the phone... So now i am blocked from doing anything... i cant even start usb debugging and take off the root....
please tell me some roms for the phone or any other way this can be undone...
Oh and btw i also tried installing some roms from http://get.cm/?device=mango because i thought cyanogen is pretty famous...
But none of them gets installed... and i even tried placing them as updates but no luck :crying::crying:
please help... thank you so much
parth.chandak02 said:
Hello guys, please forgive me if any of this has caused the slightest troubles to you
So,
i just rooted my phone a day ago and installed clockwork mod too...
i am a total newbie and don't know anything about this.... So i went searching for some custom mods for my sk17i or Xperia mini pro...
And i found one on this site http://forum.xda-developers.com/showthread.php?t=2102979
So then i installed it from the instructions given on most of the websites... i had a kernel of 4.1.b.0.587 on the phone and i don't even know much about flashtool...
Now the rom is installed or whatever it is but the UI has completely changed and it's not like the pics on the site... It's just completely black... And the worse part is that i can't even access my settings menu on the phone... So now i am blocked from doing anything... i cant even start usb debugging and take off the root....
please tell me some roms for the phone or any other way this can be undone...
Oh and btw i also tried installing some roms from http://get.cm/?device=mango because i thought cyanogen is pretty famous...
But none of them gets installed... and i even tried placing them as updates but no luck :crying::crying:
please help... thank you so much
Click to expand...
Click to collapse
Simply try reflashing the stock rom .ftf
Did u follow the instruction correctly?
Sent from my ST18i using xda app-developers app
parth.chandak02 said:
Hello guys, please forgive me if any of this has caused the slightest troubles to you
So,
i just rooted my phone a day ago and installed clockwork mod too...
i am a total newbie and don't know anything about this.... So i went searching for some custom mods for my sk17i or Xperia mini pro...
And i found one on this site http://forum.xda-developers.com/showthread.php?t=2102979
So then i installed it from the instructions given on most of the websites... i had a kernel of 4.1.b.0.587 on the phone and i don't even know much about flashtool...
Now the rom is installed or whatever it is but the UI has completely changed and it's not like the pics on the site... It's just completely black... And the worse part is that i can't even access my settings menu on the phone... So now i am blocked from doing anything... i cant even start usb debugging and take off the root....
please tell me some roms for the phone or any other way this can be undone...
Oh and btw i also tried installing some roms from http://get.cm/?device=mango because i thought cyanogen is pretty famous...
But none of them gets installed... and i even tried placing them as updates but no luck :crying::crying:
please help... thank you so much
Click to expand...
Click to collapse
Hmmm...if i understand your problem correctly, you ROOT and install CWM on you Mango, then you flash custom mods...problem appears after flashing custom mods right????
Hmmm....okey, for you info, those custom mods are for CM10 Roms ONLY and i believe you haven't flash CM10 Roms FIRST before you flash those mods...you can't use those mods on STOCK ROM (GB and ICS)...its designed for JB rom only....No wonder your phone got black screen...you trying to flash some mods that isn't COMPATIBLE with your roms...you need to flash STOCK Roms back if you want to fixed your problem...
for you second question...did your phone BOOTLOADER is Unlock??? if is not then sorry you can't CM Roms without unlocking the Bootloader first....CM Roms mush use CUSTOM KERNEL not STOCK KERNEL and after Unlocking you Bootloader then you can flash CUSTOM KERNEL and CM Roms...
Thank you so much!
iPusak Gaoq™ said:
Hmmm...if i understand your problem correctly, you ROOT and install CWM on you Mango, then you flash custom mods...problem appears after flashing custom mods right????
Hmmm....okey, for you info, those custom mods are for CM10 Roms ONLY and i believe you haven't flash CM10 Roms FIRST before you flash those mods...you can't use those mods on STOCK ROM (GB and ICS)...its designed for JB rom only....No wonder your phone got black screen...you trying to flash some mods that isn't COMPATIBLE with your roms...you need to flash STOCK Roms back if you want to fixed your problem...
for you second question...did your phone BOOTLOADER is Unlock??? if is not then sorry you can't CM Roms without unlocking the Bootloader first....CM Roms mush use CUSTOM KERNEL not STOCK KERNEL and after Unlocking you Bootloader then you can flash CUSTOM KERNEL and CM Roms...
Click to expand...
Click to collapse
:victory::victory::victory: yes my bootloader was unlocked... i did the flash thingy and now my phone is as good as new... i'm kindof getting the hold of root now...
thanks alot i restored my phone safely...
just a little bit of more help...
i need the xperia legacy kernel and cm10.1 rom for jb4.2.2
i guesss you already have it... but i wasnt able to find the kernel on google...
please give me the links if possible
thanks again
Thanks... saved my life!
iPusak Gaoq™ said:
Hmmm...if i understand your problem correctly, you ROOT and install CWM on you Mango, then you flash custom mods...problem appears after flashing custom mods right????
Hmmm....okey, for you info, those custom mods are for CM10 Roms ONLY and i believe you haven't flash CM10 Roms FIRST before you flash those mods...you can't use those mods on STOCK ROM (GB and ICS)...its designed for JB rom only....No wonder your phone got black screen...you trying to flash some mods that isn't COMPATIBLE with your roms...you need to flash STOCK Roms back if you want to fixed your problem...
for you second question...did your phone BOOTLOADER is Unlock??? if is not then sorry you can't CM Roms without unlocking the Bootloader first....CM Roms mush use CUSTOM KERNEL not STOCK KERNEL and after Unlocking you Bootloader then you can flash CUSTOM KERNEL and CM Roms...
Click to expand...
Click to collapse
mihahn said:
Simply try Reflashing the stock room .ftf
Click to expand...
Click to collapse
yes you were right i did the wrong thing....:silly:
now i flashed the stock rom and now have restored it to ics 4.0.4 build 4.1.b.0.587
thanks...also if possible please let me know any link for the custom kernel for cm10 as i need to install jellybean 4.2.2 on the phone... i guess it's the legacy xperia rom...
thanks again
parth.chandak02 said:
yes you were right i did the wrong thing....:silly:
now i flashed the stock rom and now have restored it to ics 4.0.4 build 4.1.b.0.587
thanks...also if possible please let me know any link for the custom kernel for cm10 as i need to install jellybean 4.2.2 on the phone... i guess it's the legacy xperia rom...
thanks again
Click to expand...
Click to collapse
As far as I know, the kernel should be in the rom.zip (it's the boot.img). Extract it and flash it using flashtool or the fastboot tools
Otherwise search for a kernel for android 4.2.2 in Dev section and flash that one. Should work too
Sent from my Nexus 4 running Android 4.2.2
One thing to remember is, before flashing a custom ROM or MOD, ALWAYS MAKE A BACKUP.
To be on the safer side, backup every week or so and keep the last two or three backups.
messed up again guys...
umm... hi again..
I didn't brick my phone this time (actually i did for a couple of times trying to install a custom rom)
Now my touch screen is unresponsive...
I have searched on google and most websites
Tried flashing the device with a GB ram and back with ics ROM but no luck...
Now the touch screen won't work though all BUTTONS work...
I don't know what to do...
Please help
thank you so very much again...and sorry for the inconvenience caused... again
parth.chandak02 said:
umm... hi again..
I didn't brick my phone this time (actually i did for a couple of times trying to install a custom rom)
Now my touch screen is unresponsive...
I have searched on google and most websites
Tried flashing the device with a GB ram and back with ics ROM but no luck...
Now the touch screen won't work though all BUTTONS work...
I don't know what to do...
Please help
thank you so very much again...and sorry for the inconvenience caused... again
Click to expand...
Click to collapse
Check my guide on how to fix a broken touchscreen. It's in the stickies in general forum and there are many methods and ideas how to fix it
Sent from my Nexus 4 running Android 4.2.2
pl. help
mihahn said:
Check my guide on how to fix a broken touchscreen. It's in the stickies in general forum and there are many methods and ideas how to fix it
Sent from my Nexus 4 running Android 4.2.2
Click to expand...
Click to collapse
Hi... I guess I am unable to do anything...
Is there a simpler method??
I mean I tried some of the methods in your post... But no luck...
Can't I just flash an old rom to get my screen working?? Isn't there anyone who has created a software for this...
Please help... I am utterly confused and frustrated...
anyway thanks...
i think i'm gonna be using this phone without a touchscreen now on...:crying::crying::crying::crying::crying::crying::crying:
btw...
Hey btw my touch buttons are also not working... if there is anything on it please let me know...
i need to repair this phone...pl help...
thanks a ton...
Follow this Procedure..
parth.chandak02 said:
Hello guys, please forgive me if any of this has caused the slightest troubles to you
So,
i just rooted my phone a day ago and installed clockwork mod too...
i am a total newbie and don't know anything about this.... So i went searching for some custom mods for my sk17i or Xperia mini pro...
And i found one on this site http://forum.xda-developers.com/showthread.php?t=2102979
So then i installed it from the instructions given on most of the websites... i had a kernel of 4.1.b.0.587 on the phone and i don't even know much about flashtool...
Now the rom is installed or whatever it is but the UI has completely changed and it's not like the pics on the site... It's just completely black... And the worse part is that i can't even access my settings menu on the phone... So now i am blocked from doing anything... i cant even start usb debugging and take off the root....
please tell me some roms for the phone or any other way this can be undone...
Oh and btw i also tried installing some roms from http://get.cm/?device=mango because i thought cyanogen is pretty famous...
But none of them gets installed... and i even tried placing them as updates but no luck :crying::crying:
please help... thank you so much
Click to expand...
Click to collapse
Your phone got almost bricked,No it didnt, First thing before installing a custom ROM clear your system,data,cache partition..did you do that?
ok so you have CWM installed..follow this exactly
Start CWM by pressing vol down when your phone starts up,Select Mount USB Storage under mounts and storage,connect phone to pc,transfer ROM zip file to sdcard then
format /system ,/data,/cache ,now select install zip from sdcard and select your ROM zip file from sdcard
Reboot System..
You should be clear now..
Hope i helped..
Regards..
PS :Certain CM ROMS can be highly unstable so i recommend checking out the bugs and everything before you flash a CM rom..otherwise ICS is always smooth and stable..and have got a lot a lot of mdpi roms on xda..thanks to devs..
EDIT: if u r on a stock kernel,then unlock your bootloader by following steps at unlockbootloader.sonymobile.com then flash a custom kernel that supports JB..look over at the index thread created by predator at the dev section..
then follow my steps above..
DO NOT FLASH CUSTOM JB ROM ON STOCK ICS KERNEL.IT WONT WORK.
a|\|droid_user said:
Your phone got almost bricked,No it didnt, First thing before installing a custom ROM clear your system,data,cache partition..did you do that?
ok so you have CWM installed..follow this exactly
Start CWM by pressing vol down when your phone starts up,Select Mount USB Storage under mounts and storage,connect phone to pc,transfer ROM zip file to sdcard then
format /system ,/data,/cache ,now select install zip from sdcard and select your ROM zip file from sdcard
Reboot System..
You should be clear now..
Hope i helped..
Regards..
PS :Certain CM ROMS can be highly unstable so i recommend checking out the bugs and everything before you flash a CM rom..otherwise ICS is always smooth and stable..and have got a lot a lot of mdpi roms on xda..thanks to devs..
Click to expand...
Click to collapse
u forgot to tell it must be a stock ICS rom (as he has stock kernel) otherwise he may flash cm10.2 on it and i would be messed up 2nd time
bejunk said:
u forgot to tell it must be a stock ICS rom (as he has stock kernel) otherwise he may flash cm10.2 on it and i would be messed up 2nd time
Click to expand...
Click to collapse
Yup u r correct..
Hi guys, I'm in a deadlock situation trying to recover my Xperia Ray. It just stuck at Sony logo. I know there is a lot of topics with the same issue, I've tried all that I could and most of the instructions that I can find on the internet, but not luck.
Here is what I've done but unfortunately, none works:
1) Install Sony Update Service, select Xperia Ray and reinstall the latest firmware. [Result: Successful, but still stuck at Sony Logo]
2) Download the .ftf (I flashed almost all version, GB, JB etc) , wipe everything, and flashed using flashtool. [Result: Successfully flashed, but still stuck at Sony Logo]
3) Unlock the bootloader, using Flashtool, I flashed several custom kernel and rom combination, (Lupus, Xkernel, Ice Bean Rom, MIUI rom, Xperia HD rom). [Result: Successfully flashed the custom kernel and rom, CWM from the kernel loads fine to flash the rom, but after flashing, still stuck, this time at the kernel's logo]
4) Relock the bootloader, tried to reflash the firmware using Sony Update Service again. [Result: Successfull, but stuck at Sony logo, again]
That's it, please help me, anyone have any idea on what can I do to solve this? Is it possible that this is the hardware defect, not software?
I'll really appreciate your help.
please someone help us :'(
Even i am stuck in the same situation :'( have tried out the same steps as above :/ still no success
Please some one try to help in order to get our rays working :/
Anyone? My last resort would be to send the phone to Sony service centre and see what they can do.
guys, now im on this situation too. i have no idea what should i do next. you guys can solve it ?
mrahmanda said:
guys, now im on this situation too. i have no idea what should i do next. you guys can solve it ?
Click to expand...
Click to collapse
expalain a bit further:
rom, device, root, bl unleck yes or no, worked it before ....?
the problem is if u flashed a custom kernel like mikes from cm11 or so you shouldnt see sony logo , you should see custom kerneles custom boot logo. else kernel not flash sucessfully
bejunk said:
expalain a bit further:
rom, device, root, bl unleck yes or no, worked it before ....?
the problem is if u flashed a custom kernel like mikes from cm11 or so you shouldnt see sony logo , you should see custom kerneles custom boot logo. else kernel not flash sucessfully
Click to expand...
Click to collapse
uh im sorry,
ROM: any rom stock/costum , JB/ICS/KK/GB (i tried many rom but always stuck on kernel logo)
Device: ST18i (ray)
Bl: unlocked
the problem is start when i forget my pin from lockscreen, and i do a full wipe, but stuck on kernel logo and never get boot