I'D RECENTLY PURCHASED A CHINESE TABLET WITH PHONE(7") WITH FOLLOWING SPECIFICATION...BUT SOMEHOW IT GOT LOCKED & TOUCH-SCREEN LOCKED...NO BOOT /REBOOT AFTER PRESSING RESET BUTTON OR BY PRESSING POWER+VOL UP KEY....PHONE IS IN WORKING CONDITION BUT BEHIND SCREEN...NO SCREEN RESPONSE..NOTHING I CAN DO..HELP ME OUT..PLSSS...!!!!
DESCRIPTION
____________
BB CHIP: MT6573
MS BOARD: yecon73_gb
Modem ver. : MAUI.11AMD.W11.19.SP.V3. 2011/08/15 18:10
UBOOT VER:2010.06
KERNEL VER: 2.6.35.7 ([email protected]) (gcc version 4.4.3(GCC) )
#1 PREEMPT Wed Mar 14 18:14:53 HKT 2012
ANDROID VER.:2.3.4
SW Ver. :ALPS.GB.TABLET3.MP.V3.3
CUSTOM BUILD VER NO.
MG701-0000-0.3-201203141730
Sounds like it could be a hardware issue. Sent it back if you can.
Sent from my Galaxy Nexus
ok..anyone tell me ..can I reboot or update firmware of this 'dead touch-screen' tablet ????
Hardly without recovery or touch for that matter.As the guy said before me your best chance is to take it back for repairs
Sent from my Optimus Me using xda premium
Hi ! am new member in xda
am question about hdc i9300 it notwork in dailer i want to call but it says "The system is not authorized will automatically shut down" Please help
I'm sorry my bad English.
S3 Clone Error
epneverdie said:
Hi ! am new member in xda
am question about hdc i9300 it notwork in dailer i want to call but it says "The system is not authorized will automatically shut down" Please help
I'm sorry my bad English.
Click to expand...
Click to collapse
I got my phone rooted, then installed RootAppDelete and removed all unwanted chinese apps. Every thing went fine and phone is working very well except three features (Dialer, Contact and Message), whenever I open any of them get an error msg:
System is not authorized and will automaticlly shut down (screen short attached)
Phone Version:
BB Chip : MT6575
MS Board : GT-I9300
UBoot Ver. : 2010.06
Kernel Ver.: 3.0.13 ([email protected]) (gcc version 4.4.3) #1 PREEMPT Wed Aug 22 17:26:11 CST 2012
Android Ver. : 4.0.4
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Ver: 1345627582
So, unable to use calling features, can anyone help ??
I guess this is related to ROM and not to the dialer apps.
mon2oo said:
I got my phone rooted, then installed RootAppDelete and removed all unwanted chinese apps. Every thing went fine and phone is working very well except three features (Dialer, Contact and Message), whenever I open any of them get an error msg:
System is not authorized and will automaticlly shut down (screen short attached)
Phone Version:
BB Chip : MT6575
MS Board : GT-I9300
UBoot Ver. : 2010.06
Kernel Ver.: 3.0.13 ([email protected]) (gcc version 4.4.3) #1 PREEMPT Wed Aug 22 17:26:11 CST 2012
Android Ver. : 4.0.4
SW Ver. : ALPS.ICS.MP.V2.6
Custom Build Ver: 1345627582
So, unable to use calling features, can anyone help ??
I guess this is related to ROM and not to the dialer apps.
Click to expand...
Click to collapse
No replies...
reinstall the chinese Samsun App market
samsung app
nemero16 said:
reinstall the chinese Samsun App market
Click to expand...
Click to collapse
where can i find it to download?
Brand:Samsung
Model:GT-I9300
CPU Hardware : MTK6575
Android Versiyon : 4.0.4
Processor : ARMv7 Processor rev 10 (v7I)
Hardware : SMDK4x12
Kernel : 3.0.13 1211 V18 Wed Sep 5 09:29:18 CST 2012
Ana Bant Sürümü : MAUI.11AMD.W11.50.SP.V20, 2012/08/13 14:56
Üretim Numarası : IMM76D.I9300ZSALE9
Custom Build Version : 1346760007
Ekran: 480x800
here?
Zhas666 said:
where can i find it to download?
Click to expand...
Click to collapse
h t t p://mediafire.com/?xjidtksp2trr603
have u tried any of the dialers from the play store? e.g DialerOne:fingers-crossed:
Can u plz provide me with the phones contacts.apk
Thanks
had the same issue, in the same phone after uninstalling some app,
tried many things but, nothing worked, i had to flash the official rom
can you help me please...
As I can see,you are more in to these things tha I am! I had samsung phone that i changed roms an root-unroot phone... But with this phone I CANT DO ANYTHING... Phone is:
MTK i9300 single sim, 512RAM 256ROM, dual core,
model number GT-I9300
android 4.1.5.
Baseband maui.11amd.w11.50.sp.v27,2012/08/04 20:43
kernel 2.6.35.7 [email protected] #1 sat sep29 10:54:30 cst 2012
build number alps.gb2.mp.v2.17
custom build w988_XYKJ_T14_20120929_ML
My gps,wi-fi tether, mms, wcdma is not working. I instaled mobile uncle that could help me solve my problems, but whatever i try to do,
uncle "tells" me you need to root your phone....
I tryed sp flash tools, TPSparkyRoot, z4root,DooMLoRD_SoPhone-V75-ICS-ROOT-emu-busybox-su,Flashtool_4.0,Root_with_Restore_by_Bin4ry_v18, odin could not connect to my phone...
I have all drivers as working as in download mode...
If you could hel me or know smoeone who could,.... I would be thankful to the sky an back...
same problem here.... tried all that i can find in the internet.. i think our only chance is SD card update but i cant find a working ROM
Hello, my brother owns this phone:
Model: BP-I9300
BB Chip: MT6575
Ms Board.: htt15_lca_6628_gb2
Modem ver.: MAUI.11AMD.W11.50.SP.V28 .....
Build Time: Wed Oct 17 18:17:12 CST 2012
UBoot Ver.: 2010.06
Kernel Ver.: 2.6.35.7 .....
Android ver.: 2.3.6
He modified the "bootanimation" file on /system/bin and now the phone won't boot :crying:
I tried so hard to find any stock ROMS, no luck...
Found some recovery.img, but no can't flash, always fail: s_da_emmc_flash_not_found
Maybe it's a problem with the scatter file, but no luck finding a working one.
PLEASE, someone have this phone?
someone help us?
a ROM Backup for SP Flash Tool will work
OR
since it's a "simple problem", can somenoe please help me SIGN a zip to use on stock Android System Recovery <3e> so i can put the original file back (he made a backup)?
THANKS
A friend of mine did something stupid and tried to install a CWM-recovery for his MT6589 (model: AT-AS50SE) and killed his baseband in the proces. No backups are available and both the Serial Number, baseband and IMEI say unknown. Basicly I think his NVRAM is fried and restoring the correct IMEI information on Android level doesn't work because of the broken baseband.
The device looks like a probable iOcean X7 Elite clone, but I haven't been able to find any roms with this baseband version and the original ROM is not available (the company hasn't responded yet). Also, I'm not able to use any of the tools (SN Write Tool, Maui META 3G, IMEI & SN Writer) because it won't go into META mode (because of the broken recovery mode, I can't go into recovery mode anymore) or because I don't have the correct Modem and AP database.
Can anybody provide me a backup of their AT-AS50SE or a compatible device so I can restore the baseband? Or does anybody have an other idea how to restore the baseband on this MT6589?
Code:
Model : AT-AS50SE
Build number : X-S06A_AT_L26NL_200_130911
Build date UTC : 20130911-070147
Android v : 4.2.2
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Wed Sep 11 14:59:44 CST 2013
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V13.F1.P6, 2013/08/26 10:52
Hardware : MT6589
Device: ckt89_we_jb2
Display: X-S06A_AT_L26NL_200_130911
Codename: REL
finterprint : AT-AS50SE/ckt89_we_jb2
MKT Build
ro.mediatek.version.release = X-S06A_AT_L26NL_200_130911
ro.mediatek.platform = MT6589
ro.mediatek.chip_ver = S01
ro.mediatek.version.branch = ALPS.JB2.MP
I think you might try to flash the baseband from another MT6589 device and then use Mobileuncle MTK Tools to restore the IMEI.
Searching on google for that baseband I found this:
I have also star x920. On MTKDroid tools it shows info ..
Hardware : MT6589
Model : e2001_v89_zlh_hd
Build number : e2001_v89_zlh_hd_20130321
Build date UTC : 20130321-082621
Android v : 4.2.1
Baseband v: MOLY.WR8.W1248.MD.WG.MP.V6.P1, 2013/02/27 19:53
Click to expand...
Click to collapse
I have a ZP980 and I know in some roms the baseband is taken from other mtk phones.
According to my searches, it's not possible to really flash a baseband on an MT6589 beside then replacing the modem.img and/or rewriting the NVRAM through the tools I mentioned earlier. I can't get into META mode and I tried several modem.img files.
Formatting the NVRAM and soft-replacing the IMEI through MobileUncle MTK Tools didn't work as well.
I guess that waiting for the original company to provide the files.
I had the same problem..check this guide..it worked for me.. http://forum.xda-developers.com/showthread.php?t=2461059
Sent from my ThL_11 using Tapatalk
will this work
I have Acer liquid E3 I rooted using Kingo root tool install seperate SU and twcp for KitKat had a few great ROMs work then tried Samsung galaxy ROM now no baseband imei or sim detection, my back up was lost due to dad formatting my laptop will I be able to use this method? If so what will I need? I've tried reflash stock ROMs but no luck
Thanks in advance love the work you guys do
Hi Xda,
I have a fake Lenovo S960c (didn't knew before i purchased it) , after i rooted it with kingo user cause there was a
malware which was located only by rooting . the malware was removed , but after few months the same type of
malware came again but this time there was two or three malware which was causing my battery to drain and i couldn't charge my phone battery to 100% . My Antivirus Showed my Mediatek file had a malware , i didnt know
so i uninstalled that file after my phone restarted it is caught in bootloop and won't go beyond the lenovo logo.
Please advise how can i slove this problem as i have been scammed when i bought this phone from Aliexpress,
thinking this was a real MTK6595 MODEL original Lenovo phone. I have written below my phone's real spec which i got using Mtk droid tools for your reference. please advise how can i fix my phone again.
Hardware: Mtk6572 (Mtk6595 is fake)
Model: S960c
Build Number : S5_JB3_3G_EMMC_QHD_32_4_XLD_Z12_LENO
Build Date : 20150417-064045
Andriod v: 4.4.3
Baseband: ____
Kernel v: 3.4.5([email protected])(gcc version 4.6x-google 20120106 (prerelease)(GCC)#1 SMP Fri Apr 17
18:02:31 CST 2015