FLASHABLE ZIP - This is a BETA for now, post your results... If it is not working for you... Use the DIY Method
This is BY FAR the easiest way to get Facebook Home on your EVO LTE. This tutorial assumes your EVO is rooted and running a custom recovery. A YouTube video is provided for your convenience.
PREREQS:
Download the Facebook Home Installer Flashable Zip HERE
HOW TO INSTALL
Reboot into Recovry
Select ZIP and choose second option: Backup/Restore Build.Prop
Backup Stock Build.Prop
Go through the steps, DO NOT CHECK BOX at the end and then reopen ZIP
Select first option, Install Facebook Home, leave everything checked
Reboot and wait for cache to clear (takes a few minutes)
If it is still not working, reboot one more time, then send me your build.prop
Enjoy Facebook Home without any modding!!!
YouTube Tutorial Coming Soon...
DIY METHOD
This is not an all encompassing guide. This assumes you know how to edit your build.prop and that you are using a rooted EVO LTE. A nandroid backup is recommended for this procedure.
PREREQS:
Download latest Facebook and Facebook Messenger
Download Facebook Home APK from HERE
You will get a "device not supported" warning if you try to run the app without doing the next step.
HOW TO GET IT WORKING:
Edit the following build.prop values to this:
ro.product.model=SPH-L900
ro.product.brand=samsung
(Your phone now thinks it is a Sprint Samsung Galaxy Note 2)
Enjoy Facebook Home
[Screenshot in attachments]
a bit laggy but works, thanks
Rocklee99 said:
a bit laggy but works, thanks
Click to expand...
Click to collapse
Once everything is loaded up. Things are good!
Sent from my SPH-L900 using Tapatalk 2
Are you on Sense ROM? Just tried this on CM10.1 and it still says not supported. Do you also have to change ro.product.name, ro.product.device, ro.product.board, ro.product.manufacturer?
jayzun said:
Are you on Sense ROM? Just tried this on CM10.1 and it still says not supported. Do you also have to change ro.product.name, ro.product.device, ro.product.board, ro.product.manufacturer?
Click to expand...
Click to collapse
I am, post your build.prop and we'll see if we can fix it. Lol just realized Tapatalk thinks I'm using a Note 2 too.
Sent from my SPH-L900 using Tapatalk 2
Got it, thanks for the quick reply. I had tried the apk earlier and didnt uninstall first!
jayzun said:
Got it, thanks for the quick reply. I had tried the apk earlier and didnt uninstall first!
Click to expand...
Click to collapse
To confirm... You only had to change those two lines?
Sent from my GT-P3110 using Tapatalk 2
is it suppose to be supported for us in the future?
got it working. I just got a message from my wife and her avatar shows an egg (twitter)
Posted a flashable zip that should do the work for you. Be advised that this is only a beta for now. Let me know your results!! I'll have time to polish this on Sunday.
DIY method yields "Package installer unfortunately has stopped". I edited build.prop first checked apps even copied and pasted into system/app. Ill try recovery method.
Anybody get the lockscreens working?
Sent from my SPH-L900 using Tapatalk 2
thispaininmyhead said:
Anybody get the lockscreens working?
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Mine works... I'd post a screenie but Tapatalk won't let me.
xlxcrossing said:
DIY method yields "Package installer unfortunately has stopped". I edited build.prop first checked apps even copied and pasted into system/app. Ill try recovery method.
Click to expand...
Click to collapse
That is strange... What ROM?
Sent from my EVO using Tapatalk 2
swagstr said:
Mine works... I'd post a screenie but Tapatalk won't let me.
That is strange... What ROM?
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Viper4G....did the flash version and now facebook appears in the app drawer but getting the unsupported device message will try to redo.
EDIT : still says device unsupported. My build.prop lines are accurate, not sure where I've gone wrong worked for everyone else.
xlxcrossing said:
Viper4G....did the flash version and now facebook appears in the app drawer but getting the unsupported device message will try to redo.
EDIT : still says device unsupported. My build.prop lines are accurate, not sure where I've gone wrong worked for everyone else.
Click to expand...
Click to collapse
Didn't work for me either on MeanBean latest. My FB and FB Messenger got updated today, and they have the chatheads now. But the FB Home app keeps saying device not supported after following both methods.
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRO03C
ro.build.display.id=cm_jewel-userdebug 4.2.2 JDQ39 eng.nineinchnails.20130309.163000 test-keys
ro.build.version.incremental=eng.nineinchnails.20130309.163000
ro.build.version.sdk=17
ro.build.version.codename=REL
ro.build.version.release=4.2.2
ro.build.date=Sat Mar 9 17:39:36 CST 2013
ro.build.date.utc=1362872376
ro.build.type=userdebug
ro.build.user=nineinchnails
ro.build.host=ubuntu
ro.build.tags=test-keys
ro.product.model=SPH-L900
ro.product.brand=samsung
ro.product.name=htc_jewel
ro.product.device=jewel
ro.product.board=jewel
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=HTC
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8960
# ro.build.product is obsolete; use ro.product.device
ro.build.product=jewel
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=3.16.651.3 CL147243 release-keys
ro.build.fingerprint=htc/jewel/jewel:4.1.1/JRO03C/147243.3:user/release-keys
ro.build.characteristics=default
ro.cm.device=jewel
# end build properties
#
# system.prop for jewel
#
ro.sf.lcd_density=320
# RIL properties
rild.libargs=-d /dev/smd0
rild.libpath=/system/lib/libril-qc-qmi-1.so
ro.vendor.extension_library=/system/lib/libqc-opt.so
ril.subscription.types=NV,RUIM
ro.telephony.ril.v3=subscriptionFromSource,skipCdmaSubcription
ro.telephony.default_network=8
keyguard.no_require_sim=true
DEVICE_PROVISIONED=1
telephony.lteOnCdmaDevice=1
ro.config.svlte1x=true
ro.cdma.subscribe_on_ruim_ready=true
persist.radio.no_wait_for_card=1
ro.ril.gprsclass=10
ro.ril.hsxpa=1
persist.radio.add_power_save=1
persist.radio.snapshot_disabled=1
persist.radio.apm_sim_not_pwdn=1
ro.telephony.call_ring.multiple=0
ro.ril.transmitpower=true
ro.use_data_netmgrd=true
persist.data_netmgrd_nint=16
persist.cne.UseCne=false
# NFC
debug.nfc.fw_download=true
debug.nfc.fw_boot_download=false
debug.nfc.se=true
ro.nfc.port=I2C
# enable time services
persist.timed.enable=true
# UMS
persist.sys.usb.config=mass_storage,adb
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.rommanager.developerid=cyanogenmod
keyguard.no_require_sim=true
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.clientidbase=android-google
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dateformat=MM-dd-yyyy
ro.com.android.dataroaming=false
ro.cm.version=10.1-20130309-UNOFFICIAL-jewel
ro.modversion=10.1-20130309-UNOFFICIAL-jewel
ro.config.ringtone=Orion.ogg
ro.config.notification_sound=Deneb.ogg
ro.config.alarm_alert=Hassium.ogg
ro.carrier=unknown
com.qc.hardware=true
debug.composition.type=dyn
debug.egl.hw=1
debug.mdpcomp.logs=0
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
lpa.decode=true
persist.audio.fluence.mode=endfire
persist.audio.vr.enable=false
persist.audio.handset.mic=digital
persist.audio.speaker.location=high
persist.gps.qmienabled=true
persist.hwc.mdpcomp.enable=true
persist.thermal.monitor=true
ro.baseband.arch=msm
ro.opengles.version=131072
ro.product.wireless=WCN3660
ro.qc.sdk.audio.fluencetype=fluence
ro.qualcomm.bt.hci_transport=smd
ro.telephony.ril_class=HTC8960RIL
ro.use_data_netmgrd=true
wifi.interface=wlan0
ro.com.google.locationfeatures=1
ro.cdma.home.operator.numeric=310120
ro.cdma.home.operator.alpha=Sprint
gsm.sim.operator.alpha=sprint
gsm.sim.operator.numeric=310120
gsm.sim.operator.iso-country=us
gsm.operator.alpha=sprint
gsm.operator.numeric=310120
gsm.operator.iso-country=us
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=96m
dalvik.vm.heapsize=256m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
dalvik.vm.lockprof.threshold=500
dalvik.vm.dexopt-flags=m=y
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
#More
qemu.hw.mainkeys=1
# XLoud settings
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
com.sonyericsson.xloud_enabled=true
xloud_enabled=true
ro.xloud.default_setting=1
# Bravia Engine
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Sent from my SPH-L900 using Tapatalk 2
---------- Post added at 10:43 PM ---------- Previous post was at 10:42 PM ----------
Sorry for long post. I'm on NiN CM 10
Sent from my SPH-L900 using Tapatalk 2
---------- Post added at 11:02 PM ---------- Previous post was at 10:43 PM ----------
Home seems to be working for me. I went into updated FB app and it says almost finished. I click it and it gives the option to set Fbhome as home button.
Anyone figure out how to send pics in messenger?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SPH-L900 using Tapatalk 2
---------- Post added at 11:05 PM ---------- Previous post was at 11:02 PM ----------
Sent from my SPH-L900 using Tapatalk 2
I have this working on SuperJelly. I installed the Facebook home apk and when you launch the app from the app drawer it says that Facebook needs to be upgraded and has a link, I chose that and it went to Google Play and says "device not supported". Then I used a text editor to open my build.prop and changed the following 3 lines that said JEWEL to endeavoru (the One X)
ro.product.name=endeavoru
ro.product.device=endeavoru
ro.product.mode=endeavoru
saved the changes and reboot. Launched Facebook home from the app drawer again and this time it prompted me to upgrade Facebook again and I followed the link. It actually launched Facebook but this time button to enable Facebook Home, after selecting that it asked to to choose a launcher...Sense or Home, chose Home and it signed me out and then back in to Facebook. Pressed the HTC home key and it worked like a charm. Changed the normal settings in Facebook Home, enabled Messenger to act as the default sms app and it's all set.
Reverted the 3 lined in the build prop back to JEWEL just so all my ROM settings and such work, reboot and Facebook Home is now installed and working on EVO LTE.
So I basically set my phone to be recognized as the One X to perform the install and changed it back to EVO and the app still works. Guess it only checks build.prop for verification of compatible device on install and not for use.
bigslanki said:
Anyone figure out how to send pics in messenger?
Click to expand...
Click to collapse
Pres the + in the lower left of your conversation in Messenger, gives you options to Choose pic, take one, or image search.
s1ckb0y76 said:
Pres the + in the lower left of your conversation in Messenger, gives you options to Choose pic, take one, or image search.
Click to expand...
Click to collapse
That option goes away for me in conversation ..just has emoticons... Its available before selecting receiver.
Seems you can only send to fb users and not phone contacts
Sent from my SPH-L900 using Tapatalk 2
bigslanki said:
That option goes away for me in conversation ..just has emoticons... Its available before selecting receiver.
Seems you can only send to fb users and not phone contacts
Sent from my SPH-L900 using Tapatalk 2
Click to expand...
Click to collapse
Odd, works just fine for me. Try putting your build.prop back. It might be looking for Samsung Contacts instead of HTC People since you device is being recognized as The Note II
Related
Hello!
I've just updated my phone with the latest build from Sony Ericsson.
Will upload the new ROM soon and will mention new features after going through the ROM deeply...
Build Number: 2.1.1.C.0.0
Kernel: 2.6.29
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link:
Get It!
Changes:
Let's see who is smart enough to find the new features in the firmware.
Update: After 3 hours of usage I couldn't find anything new! Maybe some bugfixes. So i guess people using 2.1.1.A.0.6 can just Advance Restore the system.
Here's a look what the build.prop says-
Code:
##### Merging of the /util/data/semc_kernel_time_stamp.prop file #####
ro.build.date=Fri Dec 17 18:35:45 2010
ro.build.date.utc=1292582145
ro.build.user=SEMCUser
ro.build.host=SEMCHost
##### Final patch of properties #####
ro.build.product=E15i
ro.build.description=E15i-user 2.1-update1 2.1.1.C.0.0 1 test-keys
ro.product.brand=SEMC
ro.product.name=E15i_1241-2655
ro.product.device=E15i
ro.product.board=delta
ro.build.version.incremental=_1_d
ro.build.tags=release-keys
ro.build.fingerprint=SEMC/E15i_1241-2655/E15i/delta:2.1-update1/2.1.1.C.0.0/_1_d:user/release-keys
######################## Customized property values #########################
ro.semc.version.cust=1241-2655
ro.semc.version.cust_revision=R4B
#########################################################################
ro.config.ringtone=sony_ericsson.ogg
ro.config.notification_sound=notification.ogg
ro.semc.content.number=PA4
################# Updating of the SW Version #################
ro.semc.version.fs_revision=2.1.1.C.0.0
ro.build.id=2.1.1.C.0.0
ro.build.display.id=2.1.1.C.0.0
##### Values from product package metadata #####
ro.product.model=E15i
ro.semc.ms_type_id=AAD-3880091-BV
ro.semc.version.fs=WORLD-1-8
ro.semc.product.name=Xperia X8
ro.semc.product.device=E15
# begin build properties
# autogenerated by buildinfo.sh
#ro.build.id=2.1.1.C.0.0
#ro.build.display.id=2.1.1.C.0.0
#ro.build.version.incremental=1
ro.build.version.sdk=7
ro.build.version.codename=REL
ro.build.version.release=2.1-update1
#ro.build.date=Thu May 12 01:33:27 CST 2011
#ro.build.date.utc=1305135207
ro.build.type=user
#ro.build.user=hudsonslave
#ro.build.host=cnbjlx2287
#ro.build.tags=test-keys
#ro.product.model=shakira
#ro.product.brand=Sony-Ericsson
#ro.product.name=shakira
#ro.product.device=shakira
#ro.product.board=delta
ro.product.cpu.abi=armeabi
ro.product.manufacturer=Sony Ericsson
ro.product.locale.language=en
ro.product.locale.region=GB
ro.wifi.channels=
ro.board.platform=msm7k
# ro.build.product is obsolete; use ro.product.device
#ro.build.product=shakira
# Do not try to parse ro.build.description or .fingerprint
#ro.build.description=shakira-user 2.1-update1 2.1.1.C.0.0 1 test-keys
#ro.build.fingerprint=Sony-Ericsson/shakira/shakira/delta:2.1-update1/2.1.1.C.0.0/1:user/test-keys
# end build properties
#
# system.prop for shakira
#
rild.libpath=/system/lib/libril-qc-1.so
rild.libargs=-d /dev/smd0
wifi.interface = wlan0
ro.sf.lcd_density=160
ro.semc.def_screen_orientation=sensor
ro.semc.timescape_keys=X8_key
ro.semc.timescape_model=1_handed
ro.semc.sound_effects_enabled=false
ro.workaround.noautofocus=1
persist.rild.nitz_plmn=
persist.rild.nitz_long_ons_0=
persist.rild.nitz_long_ons_1=
persist.rild.nitz_long_ons_2=
persist.rild.nitz_long_ons_3=
persist.rild.nitz_short_ons_0=
persist.rild.nitz_short_ons_1=
persist.rild.nitz_short_ons_2=
persist.rild.nitz_short_ons_3=
persist.ro.ril.sms_sync_sending=1
DEVICE_PROVISIONED=1
# Constant values for Battery test in Service menu.
ro.semc.batt.capacity=950
ro.semc.batt.test.consumption=150
ro.semc.batt.test.z_threshold=30
dalvik.vm.heapsize=24m
kernel.log=default
ro.telephony.call_ring.multiple=false
debug.sf.hw=1
keyguard.no_require_sim=true
#
# ADDITIONAL_BUILD_PROPERTIES
#
#ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.setupwizard.mode=DISABLED
ro.com.google.gmsversion=2.1_r11
ro.com.google.clientidbase=android-sonyericsson
net.bt.name=Android
ro.config.sync=yes
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.drm.active.num=4
ro.drm.active.0=semc,1
ro.drm.active.1=cmla,0
ro.drm.active.2=viaccess,0
ro.drm.active.3=marlin,1
THX man, if i have ur w8 build, i just do a advance restor System, or a full restore?
EL_BELLACO said:
THX man, if i have ur w8 build, i just do a advance restor System, or a full restore?
Click to expand...
Click to collapse
I guess advance restore will work....
Sent from my X8 using XDA App
any changes in new firmware?
what is the difference with the build 2.1.1.A.0.6?
how did u get it? via pc companion?
Use seus, this update actually didnt update anything what a crap... They should change kernel or whatever else this is sad...
Wysłano z X8 z użyciem Tapatalk
Did you get root with new update?
sleboard said:
what is the difference with the build 2.1.1.A.0.6?
Click to expand...
Click to collapse
Question is: is there any diffrence at all. Probably they have just updated their own apps :/
Sent from my E15i using Tapatalk
blue4you said:
Did you get root with new update?
Click to expand...
Click to collapse
yes, root is possible
Maybe f****** SE just renamed the 2.1.1.A.0.6 to 2.1.1.C.0.0 (changed it in build.prop) and released it so that people think its actually an update. What losers they are!
Sent from my X10 Mini using XDA Premium App
Thanks fifo171.
So I change my ID and would try the update
death214 said:
Maybe f****** SE just renamed the 2.1.1.A.0.6 to 2.1.1.C.0.0 (changed it in build.prop) and released it so that people think its actually an update. What losers they are!
Sent from my X10 Mini using XDA Premium App
Click to expand...
Click to collapse
Who say there need to be user space improvents
umm one question. i want to try it out anyway. How did you get the update? i used seus and i got 2.1.1.A.0.6
leaftheberry said:
umm one question. i want to try it out anyway. How did you get the update? i used seus and i got 2.1.1.A.0.6
Click to expand...
Click to collapse
You should to change si number in build.prop.
Btw. I sugest to mail se support and ask about changes in new compilations. Someone with english skills want to?
Wysłano z X8 z użyciem Tapatalk
change si number to what? =) sorry somehow a newbie =D
Allright, this is same as 2.1.1.A.0.6 only. I'm 80% sure there are no changes in system files (except build.prop) because it can be rooted same as 2.1.1.A.0.6 which would not be possible if there were changes in system files. Eg: 2.0.1.A.0.47 (or whatever) had different rooting than 2.1.1.A.0.6 and SuperOneClick Root thus needed to be edited differently for the 2.1. So, i think its just a change in build.prop and SI.
leaftheberry said:
change si number to what? =) sorry somehow a newbie =D
Click to expand...
Click to collapse
Check the first post 12th-18th line. Put in SI as 1241-2655.
I suggest that you pull the build.prop from your phone using adb and copy / paste the one posted by OP, then connect to SEUS and search for update. Hopefully it should work.
Sent from my X10 Mini using XDA Premium App
death how did you obtain the update? can you explane it to me pleas =)
EDIT: sorry.. didnt see. thanks!
Take a look that w8 sw is rootable too, this depend of system version.
Wysłano z X8 z użyciem Tapatalk
Guys .. try testing it in quadrant
Download: http://bit.ly/semlQ2
Removed bootloaders
Rooted
Changes 2.3.5 -> 2.3.6:
[Google] voice search fixes
[Samsung] removed home button double tap
Issues:
[Samsung] push email still drains the battery more the normal
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=GINGERBREAD
ro.build.display.id=GINGERBREAD.UCKJ4
ro.build.version.incremental=UCKJ4
ro.build.version.sdk=10
ro.build.version.codename=REL
ro.build.version.release=2.3.6
ro.build.date=Thu Oct 27 16:38:08 KST 2011
ro.build.date.utc=1319701088
ro.build.type=user
ro.build.user=se.infra
ro.build.host=SEI-21
ro.build.tags=release-keys
ro.product.model=SAMSUNG-SGH-I777
ro.product.brand=samsung
ro.product.name=SGH-I777
ro.product.device=SGH-I777
ro.product.board=SGH-I777
ro.product.cpu.abi=armeabi-v7a
# Samsung Specific Properties
ro.build.PDA=I777UCKJ4
ro.build.hidden_ver=I777UCKJ4
ro.build.changelist=691741
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=samsung
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=s5pc210
# ro.build.product is obsolete; use ro.product.device
ro.build.product=SGH-I777
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=SGH-I777-user 2.3.6 GINGERBREAD UCKJ4 release-keys
ro.build.fingerprint=samsung/SGH-I777/SGH-I777:2.3.6/GINGERBREAD/UCKJ4:user/release-keys
# Samsung Specific Properties
ro.build.PDA=I777UCKJ4
ro.build.hidden_ver=I777UCKJ4
ro.build.changelist=691741
ro.tether.denied=false
ro.flash.resolution=1080
# end build properties
#
# system.prop for asop5000
#
rild.libpath=/system/lib/libsec-ril.so
rild.libargs=-d /dev/ttyS0
ro.sf.lcd_density=240
dalvik.vm.heapsize=64m
# Samsung USB default mode
persist.service.usb.setting=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=2.3_r7
media.stagefright.enable-player=false
media.stagefright.enable-meta=false
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
media.stagefright.enable-rtsp=false
dev.sfbootcomplete=0
ro.com.google.clientidbase=android-samsung
ro.com.google.clientidbase.ms=android-att-us
ro.com.google.clientidbase.am=android-att-us
ro.com.google.clientidbase.yt=android-samsung
ro.com.google.clientidbase.gmm=android-samsung
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.google.locationfeatures=1
keyguard.no_require_sim=true
ro.config.ringtone=ATT_tone.ogg
ro.config.notification_sound=S_Sherbet.ogg
ro.config.alarm_alert=Good_Morning.ogg
ro.config.media_sound=Media_preview_Touch_the_light.ogg
ro.monkey=0
ro.opengles.version=131072
ro.secdevenc=true
ro.wtldatapassword=true
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yea baby. Will this help the devs out?
Sent from my SAMSUNG-SGH-I777 using XDA App
TOA Duck said:
Yea baby. Will this help the devs out?
Sent from my SAMSUNG-SGH-I777 using XDA App
Click to expand...
Click to collapse
For sure, this is the first leak I have gotten that looks like it is a release build.
Looking forward to a new Perception rom based off 2.3.6!
Great news!! Now we just need ICS source code
Designgear...I needed to ask you a question, can you please look at the 'general forums' and respond to my post about earpiece volume?
Sent from my SAMSUNG-SGH-I777 using xda premium
Been running this for a while now...
New Firmware
designgears said:
Download: http://bit.ly/semlQ2
Changes 2.3.5 -> 2.3.6:
[Google] voice search fixes
[Samsung] removed home button double tap
Issues:
[Samsung] push email still drains the battery more the normal
Click to expand...
Click to collapse
It looks like the previous firmware I777UCKJ2_designgears_Oneclick.exe
was uploaded by error or something? (check the link).
Also is this stock or a custom rom, or is it stock but rooted?
Thanks..........
Misterjunky said:
It looks like the previous firmware I777UCKJ2_designgears_Oneclick.exe
was uploaded by error or something? (check the link).
Also is this stock or a custom rom, or is it stock but rooted?
Thanks..........
Click to expand...
Click to collapse
yeah. old link. its pure stock
Link is kj2 ? 2.3.5
Sent from my SAMSUNG-SGH-I777 using XDA App
So does this mean Samsung is looking to give AT&T some software upgrade for the SGH-I777 before ICS? Honestly, I expected it to sit at 2.3.4 and eventually get ICS next decade or so.
Anybody have a good link to the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium
AllTheWay said:
Anybody have a good link to the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
what is wrong with the original link? works for me...
dooooooh! it is kj2.
links
shansmi said:
what is wrong with the original link? works for me...
dooooooh! it is kj2.
Click to expand...
Click to collapse
The original link works fine, but it's not the "I777Uckj4" as the link
says it is, its I777Uckj2.
So if its kj2 then why is it advertised/posted as "I777Uckj4"?
The link is NEW with todays date and it says:
[Firmware][2.3.6] I777UCKJ4 (Galaxy S II AT&T)
Download: http://bit.ly/semlQ2
Changes 2.3.5 -> 2.3.6:
[Google] voice search fixes
[Samsung] removed home button double tap
Issues:
[Samsung] push email still drains the battery more the normal
clicking the above link you get a new IE page with a link for
Firmware][2.3.6] I777Uckj4 (Galaxy S Ii At&t)
Clicking on the link below the actual download is I777Uckj2.
Download: http://www.ponack.ne...wiki/I777UCKJ4/
Hope this makes at least some sense
Misterjunky said:
The original link works fine, but it's not the "I777Uckj4" as the link
says it is, its I777Uckj2.
So if its kj2 then why is it advertised/posted as "I777Uckj4"?
The link is NEW with todays date and it says:
[Firmware][2.3.6] I777UCKJ4 (Galaxy S II AT&T)
Download: http://bit.ly/semlQ2
Changes 2.3.5 -> 2.3.6:
[Google] voice search fixes
[Samsung] removed home button double tap
Issues:
[Samsung] push email still drains the battery more the normal
clicking the above link you get a new IE page with a link for
Firmware][2.3.6] I777Uckj4 (Galaxy S Ii At&t)
Clicking on the link below the actual download is I777Uckj2.
Download: http://www.ponack.ne...wiki/I777UCKJ4/
Hope this makes at least some sense
Click to expand...
Click to collapse
Because whoever leaked this either made a mistake with the links or got a C&D then linked back to the original load. The load is real
New link in New post
shansmi said:
Because whoever leaked this either made a mistake with the links or got a C&D then linked back to the original load. The load is real
Click to expand...
Click to collapse
Well after reading all the posts after the new link was posted, I can't even find one person who actually flashed it yet.
So I will wait and see!
---------- Post added at 09:45 PM ---------- Previous post was at 09:40 PM ----------
shansmi said:
Been running this for a while now...
Click to expand...
Click to collapse
How is it working for you?
Do you still have it installed or did you restore a backup of some other rom?
Does the "about" in settings actually say its i777UCKJ4 & 2.3.6 ?
Misterjunky said:
Well after reading all the posts after the new link was posted, I can't even find one person who actually flashed it yet.
So I will wait and see!
---------- Post added at 09:45 PM ---------- Previous post was at 09:40 PM ----------
How is it working for you?
Do you still have it installed or did you restore a backup of some other rom?
Does the "about" in settings actually say its i777UCKJ4 & 2.3.6 ?
Click to expand...
Click to collapse
So far so good. Yes it is installed and yes the about info is correct.
haha, woops, forgot the edit the index before uploading...
all fixed.
designgears said:
haha, woops, forgot the edit the index before uploading...
all fixed.
Click to expand...
Click to collapse
thanks a lot bro
rooting
Will the superoneclick root this 2.3.6 or do we need a different
rooting method?
(I know we need to odin flash the CWM compatible kernel TAR file first.)
Does the KJ4 leak have the new bootloaders that kills the jig trick like the KJ2 leak?
Sent from my SAMSUNG-SGH-I777
Faryaab said:
Android 4.1 Jelly Bean SDK Image System Dump
Here you go, I dumped the system of Android 4.1 Jelly Bean from Android 4.1 SDK image. Let the hacking begin!
Download
Android-4.1-JellyBean-SDK-SystemDump.zip
MD5: 9461D2F1ED6B47D939AC8C52AC798A39
Build Prop File Content
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=JRN83C
ro.build.display.id=sdk-eng 4.1 JRN83C 391408 test-keys
ro.build.version.incremental=391408
ro.build.version.sdk=16
ro.build.version.codename=REL
ro.build.version.release=4.1
ro.build.date=Sat Jun 23 01:40:53 UTC 2012
ro.build.date.utc=1340415653
ro.build.type=eng
ro.build.user=android-build
ro.build.host=vpak16.mtv.corp.google.com
ro.build.tags=test-keys
ro.product.model=sdk
ro.product.brand=generic
ro.product.name=sdk
ro.product.device=generic
ro.product.board=
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=unknown
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=
# ro.build.product is obsolete; use ro.product.device
ro.build.product=generic
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=sdk-eng 4.1 JRN83C 391408 test-keys
ro.build.fingerprint=generic/sdk/generic:4.1/JRN83C/391408:eng/test-keys
ro.build.characteristics=default
# end build properties
#
# system.prop for generic sdk
#
rild.libpath=/system/lib/libreference-ril.so
rild.libargs=-d /dev/ttyS0
#
# ADDITIONAL_BUILD_PROPERTIES
#
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
ro.kernel.android.checkjni=1
xmpp.auto-presence=true
ro.config.nocheckin=yes
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
Click to expand...
Click to collapse
Faryaab said:
Deodexed System Dump: Android-4.1-JellyBean-SDK-SystemDump-DEODEXED.zip
Click to expand...
Click to collapse
for extracted wallpapers, click here.
Mods - if this should be moved out of dev, please do so.
Original thread found here.
First, Sweet I can't wait till we get our hands on some jelly bean goodies
Sent from my PG86100 using xda premium
I say that stock LTE won't have this until September. I bet we'll have a booting image by the end of the week. Go Deck! Go!
This is awesome! It has some really cool features, the enhanced search will be insanely useful!
oh wow... go for it devs!
ohh yeaaaa!!!! cant wait !!!
hope to see it on my device soon !! EVO LTE !
Android has come so far :')
Sent from my Galaxy Nexus using xda app-developers app
That's it! Get a build of AOSP 4.1 before 4.0! I love XDA.
I have it somewhat booting. i just need to edit the ramdisk. considering it didnt have a boot.img, I have to edit the classpath and try to make it past the bootanimation.
I'll say this once more though. SDk ports are like marriages... there fun at first, But in the end you know its never really going to work.
-evolutionmods
Ill try some more tomorrow.
Thanks for the upload Op!
Evolutionmods said:
I have it somewhat booting. i just need to edit the ramdisk. considering it didnt have a boot.img, I have to edit the classpath and try to make it past the bootanimation.
I'll say this once more though. SDk ports are like marriages... there fun at first, But in the end you know its never really going to work.
-evolutionmods
Ill try some more tomorrow.
Thanks for the upload Op!
Click to expand...
Click to collapse
good job buddy. If you need any help with the bootclass let me know. I do believe we have a few people interested in this.
inb4 "Can I flash this?"
Sent from my EVO using xda premium
Leoisright said:
good job buddy. If you need any help with the bootclass let me know. I do believe we have a few people interested in this.
Click to expand...
Click to collapse
Leo ill send a dl link to you on talk or on a Pm.
I used cm 9 to port it. It was *****ing in logcat about framework jar and the class path so i think we would be pretty close.
Can't wait to try this
Sent from my A500 using xda premium
Koush is on the ball over on the nexus side of the house. From what I picked up in other threads, this was built from the OTA, not the sdk dump.
Google IO Jelly Bean release for the GSM Galaxy Nexus
People are raving about how smooth it is.
edit - needless to say, but just in case, NOBODY FLASH THIS!
Can't wait to flash something funky from this....
"They" have it up and running....
http://forum.xda-developers.com/showthread.php?t=1738018
People here never cease to amaze me!
jayjam99 said:
"They" have it up and running....
http://forum.xda-developers.com/showthread.php?t=1738018
Click to expand...
Click to collapse
it may be worth noting that the link you posted is the port to the cdma version, which is nice.
jayjam99 said:
"They" have it up and running....
http://forum.xda-developers.com/showthread.php?t=1738018
Click to expand...
Click to collapse
If this is the case, could we port it from there? It's the CDMA version with LTE, so we wouldn't have that to deal with. I'm certain the mount points are different, but they shouldn't be too different. I know what I'm talking about, but I still don't know how to do it myself, so I can't be the person to do it, but it might be worth looking into.
Ungratefull
Im sorry to say that i am done with this Rom . WE DONT OWE ANYONE NOTHING!
We do this to contribute in our spare time. We have jobs ,families and everyday stuff going on. so when i get a PM saying
"You're even more lazy than deck. He said that he couldn't because he was too busy working on ICS and having a life and that he wasn't a "winzipper".
FFS are we ever going to get some real devs in here?"
I take it kind of personal. so on that note i will be focusing on ICS and my porting work.
Here is the Update Zip that was found on my OPO. It looks to be the full rom CM Build: XNPH16Q
http://www.androidfilehost.com/?fid=23487008491963158
md5: e31d8b4976c700a923d8f3234826a368
Code:
# begin build properties
# autogenerated by buildinfo.sh
ro.build.id=KVT49L
ro.build.display.id=KVT49L
ro.build.version.incremental=6a5ec2a26f
ro.build.version.sdk=19
ro.build.version.codename=REL
ro.build.version.release=4.4.2
ro.build.date=Wed Apr 16 00:04:29 PDT 2014
ro.build.date.utc=1397631869
ro.build.type=user
ro.build.user=jenkins-internal
ro.build.host=cyanogenmod
ro.build.tags=release-keys
ro.product.brand=oneplus
ro.product.name=bacon
ro.product.board=MSM8974
ro.product.cpu.abi=armeabi-v7a
ro.product.cpu.abi2=armeabi
ro.product.manufacturer=OnePlus
ro.product.locale.language=en
ro.product.locale.region=US
ro.wifi.channels=
ro.board.platform=msm8974
# ro.build.product is obsolete; use ro.product.device
ro.build.product=A0001
ro.product.model=One
ro.product.device=A0001
# Do not try to parse ro.build.description or .fingerprint
ro.build.description=one-user 4.4.2 KVT49L XNPH16Q release-keys
ro.build.fingerprint=oneplus/one/bacon:4.4.2/KVT49L/XNPH16Q:user/release-keys
ro.build.characteristics=default
ro.cm.device=bacon
# end build properties
#
# from device/oneplus/bacon/system.prop
#
#
# system.prop for one+
#
ro.sf.lcd_density=480
rild.libpath=/system/vendor/lib/libril-qc-qmi-1.so
persist.radio.add_power_save=1
rol.ril.ext.ecclist=112,911,999,110,122,119,120,000,08,118
# sensors
ro.qc.sdk.camera.facialproc=true
ro.qc.sdk.gestures.camera=false
ro.qc.sdk.sensors.gestures=true
# gps
ro.qc.sdk.izat.premium_enabled=1
ro.qc.sdk.izat.service_mask=0x5
persist.gps.qc_nlp_in_use=0
ro.gps.agps_provider=1
ro.qualcomm.cabl=0
#
# ADDITIONAL_BUILD_PROPERTIES
#
keyguard.no_require_sim=true
ro.com.android.dateformat=MM-dd-yyyy
ro.carrier=unknown
ro.config.notification_sound=OnTheHunt.ogg
ro.config.alarm_alert=Alarm_Classic.ogg
mm.enable.smoothstreaming=true
mm.enable.qcom_parser=37491
ro.qc.sdk.audio.fluencetype=fluence
af.resampler.quality=4
audio.offload.buffer.size.kb=32
av.offload.enable=true
av.streaming.offload.enable=true
use.voice.path.for.pcm.voip=true
audio.offload.gapless.enabled=false
qcom.hw.aac.encoder=true
persist.aanc.enable=true
tunnel.audio.encode=true
persist.hwc.mdpcomp.enable=true
persist.timed.enable=true
ro.opengles.version=196608
ro.qualcomm.bt.hci_transport=smd
ro.telephony.default_network=9
ro.use_data_netmgrd=true
persist.data.netmgrd.qos.enable=true
telephony.lteOnGsmDevice=1
wifi.interface=wlan0
wifi.supplicant_scan_interval=15
dalvik.vm.heapstartsize=16m
dalvik.vm.heapgrowthlimit=192m
dalvik.vm.heapsize=512m
dalvik.vm.heaptargetutilization=0.75
dalvik.vm.heapminfree=2m
dalvik.vm.heapmaxfree=8m
ro.hwui.texture_cache_size=72
ro.hwui.layer_cache_size=48
ro.hwui.r_buffer_cache_size=8
ro.hwui.path_cache_size=32
ro.hwui.gradient_cache_size=1
ro.hwui.drop_shadow_cache_size=6
ro.hwui.texture_cache_flushrate=0.4
ro.hwui.text_small_cache_width=1024
ro.hwui.text_small_cache_height=1024
ro.hwui.text_large_cache_width=2048
ro.hwui.text_large_cache_height=1024
ro.rommanager.developerid=cyanogenmod
ro.com.google.clientidbase=android-oneplus
ro.url.legal=http://www.google.com/intl/%s/mobile/android/basic/phone-legal.html
ro.url.legal.android_privacy=http://www.google.com/intl/%s/mobile/android/basic/privacy.html
ro.com.android.wifi-watchlist=GoogleGuest
ro.setupwizard.enterprise_mode=1
ro.com.android.dataroaming=false
ro.build.selinux=1
persist.sys.dun.override=0
persist.sys.root_access=0
ro.setupwizard.mode=OPTIONAL
ro.com.google.gmsversion=4.4_r2
drm.service.enabled=true
ro.cm.version=11.0-XNPH16Q-bacon
ro.modversion=11.0-XNPH16Q-bacon
ro.cmlegal.url=http://www.cyanogenmod.org/docs/privacy
ro.cm.display.version=11.0-XNPH16Q
ro.config.ringtone=Orion.ogg
persist.sys.dalvik.vm.lib=libdvm.so
net.bt.name=Android
dalvik.vm.stack-trace-file=/data/anr/traces.txt
ro.vendor.extension_library=/vendor/lib/libqc-opt.so
Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, implodes, flames start shooting from it, or it kills your neighbor's dog. Flash at your own risk. This process is not for the faint of heart so I am not responsible.... It was the other guy... I swear....
graffixnyc said:
Here is the Update Zip that was found on my OPO. It looks to be the full rom
Click to expand...
Click to collapse
Nice, now everyone can start having fun. :highfive:
Thank you, let's try gallery apk
Sent from a mobile Gadget...
And how to flash or with wich recovery?
Sent from my GT-I8730 using XDA Premium 4 mobile app
paulwollf said:
And how to flash or with wich recovery?
Sent from my GT-I8730 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
this is not a rom. its a dump. theres nothing to flash.
The Jack of Clubs said:
this is not a rom. its a dump. theres nothing to flash.
Click to expand...
Click to collapse
Actually it is a rom It will flash in the stock recovery but not a custom one I do not think
oh ok. interesting.
The Jack of Clubs said:
oh ok. interesting.
Click to expand...
Click to collapse
Yeah when I booted up the device and checked the SD card this zip was on it I am uploading a dump now though that is a newer build
graffixnyc said:
It will flash in the stock recovery but not a custom one I do not think
Click to expand...
Click to collapse
Remove the first two lines of the updater-script.
Harfainx said:
Remove the first two lines of the updater-script.
Click to expand...
Click to collapse
I think the zip is encrypted. When I tried changing it and added back to the zip it said it was corrupt (same message you get when you try to add something to an encrypted ruu)
Sent from my One using Tapatalk
graffixnyc said:
I think the zip is encrypted. When I tried changing it and added back to the zip it said it was corrupt (same message you get when you try to add something to an encrypted ruu)
Sent from my One using Tapatalk
Click to expand...
Click to collapse
I just used good old 7-zip and was able to pull the updater-script out, delete the first two lines with Notepad++ and add it back to the zip without issue.
bp328i said:
I just used good old 7-zip and was able to pull the updater-script out, delete the first two lines with Notepad++ and add it back to the zip without issue.
Click to expand...
Click to collapse
Hmm I'll try again when I get home.. I just tried quick
Sent from my HTC One_M8 using Tapatalk
Let the games begin! I'm glad someone on XDA who knows what they're doing got a hold of a One, the best thing that can happen for the dev community with a device built for the dev community.
Rangizingo said:
Let the games begin! I'm glad on XDA who knows what they're doing got a hold of a One, the best thing that can happen for the dev community with a device built for the dev community.
Click to expand...
Click to collapse
Edit: LOL! You can flash the ROM directly and it works fine on the Oppo Find 7a. Let the testing begin!
rayfin said:
Edit: LOL! You can flash the ROM directly and it works fine on the Oppo Find 7a. Let the testing begin!
Click to expand...
Click to collapse
Yes it works on oppo7 but no sound...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
m3dd0g said:
Yes it works on oppo7 but no sound...
Click to expand...
Click to collapse
Does vibration work? Also, in call sound... Is that working? I can deal with the back speaker not working if the in call ear speaker and microphone work. ColorOS is a joke IMO.
Sent from my X9006 using Tapatalk
housry23 said:
Does vibration work? Also, in call sound... Is that working? I can deal with the back speaker not working if the in call ear speaker and microphone work. ColorOS is a joke IMO.
Sent from my X9006 using Tapatalk
Click to expand...
Click to collapse
Vibration works and also in call sound.
Gesendet von meinem One mit Tapatalk
m3dd0g said:
Vibration works and also in call sound.
Gesendet von meinem One mit Tapatalk
Click to expand...
Click to collapse
Good news there. I might give it a try then. Thanks for the quick reply!
Sent from my iPad using Tapatalk
housry23 said:
Good news there. I might give it a try then. Thanks for the quick reply!
Sent from my iPad using Tapatalk
Click to expand...
Click to collapse
Let us know how it works out for you sir. On the Find 7a
m3dd0g said:
Vibration works and also in call sound.
Gesendet von meinem One mit Tapatalk
Click to expand...
Click to collapse
One more question..I'm sorry. Do headphones work? It's downloading so slow for me or I'd already have it flashed.
Sent from my iPad using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SCREENSHOTS
Code:
I'm not responsible if you brick your device or your device explodes or anything similar!!
Back up before you flash ANYTHING !
Note:
As usual, a rom stock corrected for my taste!
Based D5803_23.4.A.0.546_Customized FR.ftf
This time if no recovery or Xposed installed in the flash.
You need to install them independently.
To operate correctly Viper4A, SeLinux must be launched is spend on Permissive.
INSTALLATION
Place the flashable-rectify-prerooted-signed.zip on your sdcard
Boot Into Recovery
Wipe Data, Cache, Dalvik Cache and system
Installflashable-rectify-prerooted-signed.zip
Reboot and enjoy
If you want to install the XzRecovery Follow this topic
For Xposed Frameworck Follow this topic
The plus for delirium, following the theme installed the color of the background parameters change.
Download
flashable-rectify-prerooted-signed.zip
Version 5.0
SCREENSHOTS
Code:
I'm not responsible if you brick your device or your device explodes or anything similar!!
Back up before you flash ANYTHING !
Note:
Sorry I have small one concerns at present with the creation of my updater-script. We are thus going to pass by a method different from flash
INSTALLATION
Place the rEctifY_1.0.1_28_D5803_DRM.zip on your sdcard (official ftf_D5803_Customized FR_1288-6117_23.1.A.1.28 Sony Pré-rooted/XdualRecovery/Xposed/DRM/Debloat_rEctifY)
Boot Into Recovery
Wipe Data, Cache, Dalvik Cache and system
Install rEctifY_1.0.1_28_D5803_DRM.zip
Reboot and enjoy
Changing Build.pro
# Better Image & Audio Quality
ro.media.enc.jpeg.quality=100
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
# Fix some application issues
ro.kernel.android.checkjni=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
DRM FUNCTION RESTORATION included
SystemUI.apk Tweaks - v2.0 with the navigation bar 3 buttons
Download
rEctifY_1.0.1_28_D5803_DRM.zip
flashable-signed.zip
Debloat_rEctifY.zip
Version KitKat
SCREENSHOTS
Code:
I'm not responsible if you brick your device or your device explodes or anything similar!!
Back up before you flash ANYTHING !
Note:
I just build this rom on my own by extracting the ftf of 4.4.4 and deodexed all the system apps and pre-rooted it
INSTALLATION
For locked bootloader
Flash official Sony's 23.0.1.A.5.77
Root using the method
Install XZDualRecovery (http://forum.xda-developers.com/z3-compact/development/z3c-xzdualrecovery-qa-t3014208).
Boot Into Recovery
Wipe Data, Cache and Dalvik Cache
Flash Zip
Reboot and enjoy
For unlocked bootloader
Flash D5803_23.0.1.A.5.77_Customized_DE_Root_XZdualRecovery.zip (To be on good bases)
Boot Into Recovery
Wipe Data, Cache and Dalvik Cache
Flash Zip
Reboot and enjoy
To install separately for the UB, Just after the flash of the Rom
# DRM FUNTION RESTORATION FOR UB DEVICE Patch | Xperia Z* Series
Be sure to flash Z3C-XZDRKernel2.8.1-RELEASE.flashable.zip from http://nut.xperia-files.com after installing the ROM and before you reboot, this way you will not lose recovery!
Features
# Debloat
# Deodex
# Zipalign
# Root SuperSu v2.45
# Busy Box
# Paranoid Android Notification Peek
# Xposed Installer
# Viper4Android
# Xperia ™ Xposed (KK) 3.3
# Blurred System UI - v1.9
# Textdroider_DPI
# NDRUtils
# Viper4Android Xhfi
# ......................
Integration of Viper4 in the parameters sound.
Integration of Viper4 Xhfi in the parameters sound.
You can install Impulse Response Samples thanks to zhuhang
Modification du Build.pro
# Better Image & Audio Quality
ro.media.enc.jpeg.quality=100
ro.ril.disable.power.collapse=0
debug.performance.tuning=1
video.accelerate.hw=1
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
# Save battery
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
# Fix some application issues
ro.kernel.android.checkjni=0
# Enables 270 Degree Rotation
windowsmgr.support_rotation_270=true;
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# No Delay In Making Call
ro.telephony.call_ring.delay=0
ring.delay=0
Deletion of googles apps, but you can reinstall them with the folder "Gapps_rEctifY".
Attention : Gapps_rEctify are to be installed after a restart following the installation of the Rom
In the folder Gapps_rEctify there is :
# Books
# Drive
# Magazines
# Maps
# Music2
# PlayGames
# PlusOne
# Videos
# GoogleKeep.
Download
D5803_rEctify_1.0.4b.zip
You can find different systemUI in this subject
Gapps_rEctify
Thanking to the donors
@ PUFF1N
Credit
Ticklefish
Chainfire
Ben Ling
Pandemic
Madaditya
Saqib Nazm
AndroPlus
DooMLoRD
[NUT]
serajr
niaboc79
Without their contributions on xdadevelopers, I would not have been able to present it.
XDA: DevDB Information
rEctifY Xperia Z3 compact, ROM for the Sony Xperia Z3 compact
Contributors
_MutantX_
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: none
Based On: Stock 23.4.A.0.546
Version Information
Status: Stable
Created 23-12-2014
Last Updated 05-08-2015
Thx for releasing this build - now i have the chance to have a look inside the ROM's structure and all the used system apps
Nice. Thanks!
Thank you for this new rom
Anyone know if you can flash the newly confirmed working sort of DRM feature enabler thing on this?
Sent from my D5803 using XDA Free mobile app
slyr114 said:
Anyone know if you can flash the newly confirmed working sort of DRM feature enabler thing on this?
Sent from my D5803 using XDA Free mobile app
Click to expand...
Click to collapse
Excuse too I am wrong, but this day nothing allows to get back the features of the DRM on the range Z3
smorgar said:
Seems to be a way around the DRM problem: http://forum.xda-developers.com/showpost.php?p=57675821&postcount=348
Click to expand...
Click to collapse
You can try this solution, but I did not see of difference.
_MutantX_ said:
You can try this solution, but I did not see of difference.
Click to expand...
Click to collapse
you really think there is no difference? You can see some noise in the picture?
Enviado desde mi D5803 mediante Tapatalk
unable to set apps runnable in stamina
agam1308 said:
you really think there is no difference? You can see some noise in the picture?
View attachment 3081713View attachment 3081714
Enviado desde mi D5803 mediante Tapatalk
Click to expand...
Click to collapse
I do not say that it does not work. But would be needed an image of comparison without the patch DRM FUNTION RESTORATION FOR UB DEVICE.
But I can integrate the patch into the next update of the Rom.
jsscx said:
unable to set apps runnable in stamina
Click to expand...
Click to collapse
I also noticed this problem. I work to correct it.
_MutantX_ said:
[*]# Icon "Back" in it status bar
Click to expand...
Click to collapse
What does this mean?
mattdm said:
What does this mean?
Click to expand...
Click to collapse
The icon which I added to the right of the hour in the status bar, allows to set in sleep the screen.
Hello,
Small update
after recovering my SMS the SMS / MMS app keeps crashing. Reinstalled it now three times!
Any Ideas?
jsscx said:
unable to set apps runnable in stamina
Click to expand...
Click to collapse
fixed?
_MutantX_ said:
Hello,
Small update
Click to expand...
Click to collapse
Not so small
I will try your rom, thanks for sharing your work
If this patch works I can see bright future for this phone
follettoverde said:
fixed?
Not so small
I will try your rom, thanks for sharing your work
Click to expand...
Click to collapse
Yes Problem stamina corrected
:laugh:
Envoyé de mon D5803 en utilisant Tapatalk
Another question, can i use this xposed module http://forum.xda-developers.com/showthread.php?t=2612179 ?
follettoverde said:
Another question, can i use this xposed module http://forum.xda-developers.com/showthread.php?t=2612179 ?
Click to expand...
Click to collapse
Yes
I am spirit to test him. He will come certainly in the next update
Envoyé de mon D5803 en utilisant Tapatalk