Related
Hey all,
I have been using my Eris with a bluetooth Stereo for a quite a while, but when I rooted the phone over to a 2.1 ROM it started using Simple Secure Pairing (SSP) when authenticating the bluetooth headphones. My car stereo doesn't support this (its brand new too...).
So, the question is has anyone ever looked into disabling SSP and forcing it to use the old static key method of pairing in 2.1?
I am not adverse to diving in and doing the dev work, I just wanted to make sure someone hasn't already done it. If I do need to dive in does anyone know if its possible to disable it via a config file, or will I need to backport the bluez stack?
Thanks for all the great work,
traetox
I too am having this issue. Worked fine in 1.5 but ever since root it will play audio through pioneer head unit but phone won't connect. I will patiently await a fix.
-------------------------------------
Sent via the XDA Tapatalk App
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore. It's not a huge inconvenience, since I mount my phone in the car anyway (long commute). It's only a problem if I need to have Google Navigation in the foreground but still want to change songs.
Patiently waiting. You devs are awesome, if you don't get enough sycophantic slobbering already.
ok, so I did some digging on mine and it turns out that I can pair with a simple bluetooth headset via the '0000' key. But the phone attempts to go through the full key negotiation to connect the "bluetooth headphones." So i can get audio via the headset negotiated connection, but it sounds awful without full AD2P.
I am getting a ROM kitchen setup and will try and map the 1.5 bluez stack onto the 2.1 source and see where that gets me.
Thanks for the input.
Thanks for working on this! I've tried to incorporate some of the Bluetooth files as well as the WLAN.ko from other roms into my Rom but have been unsuccesful. I am running damage control 2.08 that I ported. I was originally unable to get WiFi or Bluetooth to work until I copied the WLAN.ko from the oc patch now both work minus the phone. Don't know if this helps but figured i let you know. If you have those files from a 1.5 Rom I will try them in my port and let you know what the results are.
-------------------------------------
Sent via the XDA Tapatalk App
bt issues as well any fix
I have posted several times on this can not get an answer Have the same issues anyone with experience know what I can do?
Here is my situation I have driod eris ee2.1 on verizon before root I could auto connect bt to my pioneer avic d3 with phone audio only I had to manually connect media audio every time but I got used to it but since root I now can connect to media audio only and when I try to connect phone audio it dissconnects in less than a minute I am at a loss as to what to do thought maybe someone has experienced this and figured it out Thanks in advance.
suppliesidejesus said:
Oh, so that's what's up.
I'm having a similar problem with my Jabra Cruiser bluetooth speakerphone/FM transmitter. What mine does, though, is it will connect and I can use it to listen to music and do the normal speakerphone functions like it normally would, but none of the media buttons will work anymore.
Click to expand...
Click to collapse
I have a Jabra Crusier, and I'm having an issue with a lot of ROMs where I can not connect to it and stream music over bluetooth. I have found that Aloysius v6 Maps rom by Spencer Moore works well with the bluetooth thing. You may have to connect and disconnect a few times here and there to get it to connect, but it's been the best ROM for it. I used V11 Maps and it worked for a little while, but stopped connecting properly just recently.
There are a few known bugs with v6, but I'm fiddling with V11 to try and get the bluetooth to stay perm. Once I get it, I'll let Spencer Moore know and get him any new updates I come across.
Just an update. I am able to pair and connect to phone using white widow Rom.
-------------------------------------
Sent via the XDA Tapatalk App
Okay this is what I've been wondering...is there anyway to use an Android phone as a bluetooth headset for the Galaxy Tab (or any Android tablet for that matter)? im planning on getting T-Mobile's prepaid Android 2.2 phone and i want to keep my minute usage down by using Google Voice on the tablet. And since they both have bluetooth capabilities it should be possible to use it in this manner, right? I do not want to use one of those hideous, uncomfortable bluetooth headsets because im already going to have a bluetooth device (the phone) with me that im more comfortable using. Is there any way to do this or an app that enables this functionality?
Isn't that like call forwarding or something?
no because your not forwarding your calls, your handling the call over bluetooth. this is what im talking about: people will call my tablet's Google Voice number, and I will be able to use my phone as a bluetooth headset for the tablet to take the call
its the same concept as bluetooth headsets today:
-you get a bluetooth headset
-you pair the headset with your phone
-you take calls on your phone but talk and listen through your bluetooth headset
the way im trying to do this is:
-you get a bluetooth-capable phone
-you pair the phone with your tablet
-you take calls on your tablet but talk and listen through your bluetooth phone
since the phone already has everything that a bluetooth headset has--microphone, earpiece, bluetooth radio-- it should be able to pair with the tablet and work in the same manner as a regular bluetooth headset
yes!
Im looking thos for months my friend. But no one seems to know anything. We are talkin for clever and serius programming so it is not so easy to find sonething.
Profile
I have been looking to do the same thing with my Samsung tab. Instead of walking around stucked to my face.
Yes I could use a BT headset, but it won't dial out. There is a specific Bluetooth profile to do this.
i don't know much about this, but wouldn't the phone would need the bluetooth protocol that a headset uses? someone would have to make a program that would allow the phone to be used as a headset, but then also decide what gets priority if the phone needs to also access the mic or earpiece when you are on a call...
i don't mind simply using a bluetooth - that is more comfortable and flexible than me holding a phone in one hand.
I am seekung solution too.
I'm looking for a solution to this as well. But a different application.
using a tablet as a car-computer.
leave phone in pocket. take and view phone calls though tablet, which is mounted to dash, which is routed to the car audio system with strategically placed microphone built into dash.
I'm surprised no one has made this... seems like something many would be after.
looking for the same here :-(
I want to buy a cheap tablet to leave in the car and use as a gps.
I'd like it to being able to be connected to my phone and work as a bluetooth hands free of sorts.
anyone has 2 android devices to try and connected and see what happens?
Me too - so i'm posting here to show that there is really demand for solution
bump 10char
The Phone app apk is there but it doesn't work Honeycomb, Google Voice also FCs. I think it's because Google knows it would take away from the Android Phones and that would piss off the carriers.
Why should it take people away from carriers? Me want to use my communicator as phone №2, so i could not take from my pocket the first one.
Yuna said:
Why should it take people away from carriers? Me want to use my communicator as phone №2, so i could not take from my pocket the first one.
Click to expand...
Click to collapse
Because you could Google Voice, Skype, etc for a lot cheaper than a carrier.
same same, would be great solution to using tab as a phone
What we are seeking is the Bluetooth HFP (Hands-Free Protocol) (ver. 1.5) HF Profile. Many newer OEM car head-units support the HFP hands-free (HF) mode while most all Android devices and tablets support the audio gateway (AG) mode only.
I am not a developer but I would suspect that getting the AG portion of HFP to work would require changes to the BT drivers. If anyone has the HF mode working on an Android device, please chime in!
ianwood said:
What we are seeking is the Bluetooth HFP (Hands-Free Protocol) (ver. 1.5) HF Profile. Many newer OEM car head-units support the HFP hands-free (HF) mode while most all Android devices and tablets support the audio gateway (AG) mode only.
I am not a developer but I would suspect that getting the AG portion of HFP to work would require changes to the BT drivers. If anyone has the HF mode working on an Android device, please chime in!
Click to expand...
Click to collapse
Do any devs have ideas? This would make tons of tablet owners happy. In an ideal world, we would be able to keep an Android phone in our pocket, and send/receive texts on the tablet through our phone carrier, as well as make and receive calls using our tablets as a Bluetooth speaker phone. This marriage of tablet to phone would be awesome, and generate a lot of money and interest in the app market.
Does anyone know if there has been any progress on using a phone as a bluetooth headset for a tablet? I am trying to figure out how to do this with a samsung galaxy gio and a samsung galaxy tab 7.
junglizste said:
I'm looking for a solution to this as well. But a different application.
using a tablet as a car-computer.
leave phone in pocket. take and view phone calls though tablet, which is mounted to dash, which is routed to the car audio system with strategically placed microphone built into dash.
I'm surprised no one has made this... seems like something many would be after.
Click to expand...
Click to collapse
This is the exact solution I am looking for! Come on developers of the world, how hard can it be!
So is the problem with this that Android doesn't support the necessary profiles in its bluetooth stack? Is there any way to add the profiles ourselves?
It would be nice if a developer would look into this.
I have a Jabra Clipper audio player to play my MP3's & streaming internet radio to my car stereo via 3.5mm jack. I also have my Moto BT headset that I use.
When I get a call the music is interrupted and I can answer the call with the Jabra Clipper and I can hear the call audio through the car speakers. The problem is my microphone on my phone is too far away on my car dock and people can't hear me.
So after answering the call I would have to go to settings, wireless, bluetooth and disconnect the Jabra and connect my Moto headset before I can take the call.
This is a pain and takes too long, is there a widget to swap paired BT devices? I cannot find anything in the marketplace.
Maybe a Tasker profile? I have Tasker but I haven't gotten any profiles to work yet.
I have a Droid X running Liberty 1.5.
Thanks.
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
PetRiLJoe said:
Nice! I have a Jabra Clipper too! I say that because I have not seen anyone else with one yet lol.
Ever since I switched to CM7 I have been able to 1-touch enable/disable Bluetooth and Wifi among 10 other optional, additional buttons via the status bar. I hope this bar never goes away in future updates! Anywho you could check that out for managing your bluetooth connection quickly and efficiently.
All I can say in addition to that is clicking on individual bluetooth devices in the menu allows you to disable specifically phone / media audio. You could try disabling one or the other for one of your devices so that they both work independently. I'm not really sure how else to help you because of the unique situation.
Your best bet is to make your setup less complicated, by not using one or the other device, but I saved that one for last because it isn't what you're looking to accomplish.
Click to expand...
Click to collapse
Thanks for your reply, what is CM7?
scramer said:
I don't know if this will help, but can you not have both items paired and connected at the same time? My car has bluetooth for my phone for talk only, and I just added a Tunelink device to stream my music by bluetooth in the car. I've noticed when I get in the car that both will be paired, but only the car will be connected. So I have added a bluetooth widget to my homescreen, when I get in the car I will click on the widget that opens up the bluetooth settings and click on the Tunelink to connect it, from then on out both items are connected AND paired and both will work with no problems.
I initially had the HTC settings > Bluetooth shortcut, but then when Widgetsoid added the capability to choose bluetooth settings I changed to that.
http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Click to expand...
Click to collapse
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
ryant35 said:
I use Widgetsoid but I haven't tried 2, I set up a shortcut to BT settings on my widget so far. I'll try the new version and see if it works out. Thanks.
Click to expand...
Click to collapse
Here is the link: http://www.appbrain.com/app/widgetsoid2-x/com.jim2
Prior to the upgrade last week, the widget would only turn bluetooth on or off. With the update last week it added the option to have it open up the bluetooth (or wifi) options. This isn't automatic, you have to choose for it to do this in the options.
I don't know maybe the phone won't automatically connect with two items at once. It's a hassle to connect each time, but after the initial connection everything runs smoothly.
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
You saved me From buying a new stereo!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Thanks a ton! This $1.50 app saved me from having to purchase a new stereo!
Just to let you know, this solved the exact problem I was having, over five years later! Thanks!
ryant35 said:
I downloaded Widetoid 2 and loaded it, now I have an BT settings icon on my switcher.
I managed to figure it out without he use of a widget, under my bluetooth settings I selected my Jabra Clipper and unchecked phone audio. Now I can connect my Clipper as media audio and my BT headset at phone audio at the same time. Now when I get a call the audio switches from the Clipper to the BT headset.
Thanks for your help.
Click to expand...
Click to collapse
Headphone Connect - One Click Audio is a really simple app that let's you connect / disconnect to your desired bluetooth headset.
You find it in the play store if you search for "Headphone connect - one click audio"
I realize this is an old post, but I recently released an app called ShortTooth: create customized single-click shortcuts to connect to any paired Bluetooth device.
I use it to disconnect from my home stereo when I get into the car (parked close enough to still be paired), and reconnect to my home stereo when I get back.
You could use it to create two shortcuts:
* Toggle Jabra
* Toggle Moto
Or you can create two rows:
* Connect Jabra | Discconnect Jabra
* Connect Moto | Discconnect Moto
It has a free 14-day trial.
Hi All,
I have an NFC enabled Samsung Galaxy Nexus and have placed NFC tags in specific places (car, living room, home theater, bedroom, etc.) so that I when I set my phone on the NFC tag I can automatically play music over Bluetooth in that location.
I am trying to completely automate connecting to a *specific* Bluetooth device. (I am not looking to simply toggle Bluetooth on or off, or select the desired Bluetooth device from a menu.) I am currently using "NFC Task Launcher" to accomplish the majority of this, but as far as Bluetooth is concerned, the most I've been able to automate so far is to simply Bluetooth on or off. (I also tried "Tasker" but the functionality I am looking for is missing from this app as well.) I have not found a way to read an NFC tag and automatically connect to a specific Bluetooth device based on which tag is read, nor have I even found a "one click" app / widget that connects to a specific Bluetooth device. (If such a "one click" app / widget exists, I could automate the launching of that app to make the connection.).
(Also having the Bluetooth device in each location initiate the connection isn't a viable solution, I need for the phone to iniatiate the connection.)
Does anyone have any suggestions? Thanks in advance!
Ran across this looking for the same answer. Surprised no one has responded in over a month here.
Did you have any luck finding a workaround for specific BT device connections?
Hi,
I am the developer of MacroDroid an automation application for Android (that supports NFC tags).
This is a feature one of my users has just requested, so I'm just starting to look into the feasibility of adding it. (I came across this post during my initial research).
I will report back here on what I find and if all goes to plan I'll get the feature added to MacroDroid ASAP.
In the meantime, I'd appreciate ALL feedback (positive and negative) with regards to MacroDroid as I hope to make it as powerful and flexible as possible. It's available on Google Play here:
https://play.google.com/store/apps/details?id=com.arlosoft.macrodroid&hl=en
Cheers,
Jamie
Just a quick follow up to my last post.
I believe it is possible to implement functionality to connect to a specific device. I currently don't have an appropriate device to test this, but I have one on order. As soon as I receive it, I'll have a go at adding this to MacroDroid.
In the meantime the following app on the market:
https://play.google.com/store/apps/details?id=a2dp.Vol&hl=en
Has the capability to connect to a second Bluetooth device when a Bluetooth connection is established. This may or may not help depending on what you are doing.
Any update on this? I'm also in the same boat. My car doesn't automatically connect anymore, never really did, I think its Bluetooth > 3.x on phone( 4.0 right now, but same on older past devices on S3 ) and the stereo bluetooth is older version( can't remember exactly. )
Anyways, thanks dev for posting about the other app, plan on trying it out tomorrow. In the meantime have you made any progress on your app for this functionality? I'd rather keep everything( all settings ) in one app if I can. Don't think Tasker allows this still, not sure on locale but I doubt it also.
Eagerly awaiting an update
A few more options
Did a little more searching just in case anything new has been released recently - came up with a few new options.. None seem to suit my need (trigger connection within Tasker via a plugin or directly opening an app), but posting here since they may help others.. I haven't tried these - just going on app descriptions.
So, in addition to A2DP Volume as suggested by UndeadCretin, which would be the best option if you want the connection to a A2DP device when another BT device connects, there's also Car Music Connector (https://play.google.com/store/apps/details?id=com.cleansoft.carmusic) which would seem to fit the bill for most people perfectly. Free, and "Connects you device to Bluetooth stereo in one widget click or NFC tap." Downside would seem to be that it would need to be set as default NFC app for one tap NFC triggering.
If just a widget is needed, Bluetooth Autoconnect (https://play.google.com/store/apps/details?id=com.btautoconnect), which is a paid app - although Car Music Connector also has a widget so is probably a better (and free!) choice.
Edit: Scratch that.. Car Music Connector doesn't prompt for a device to connect to.. I only have 1 A2DP device paired, and it wont connect to it (just times out) - maybe someone else will have better luck.
Bluetooth Autoconnect seems like it should work, however it enables/disables bluetooth at the same time - so if you already have bluetooth turned on, it turns it off. <sigh>
I'm unable to get it to connect to the either of 2 A2DP devices though - emailed the Dev hoping that it's just something funky with my device (Galaxy S3) that can be worked around.
Interested in this as well.
Firstly sorry for the long delay in replying!
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device. I have it working on my 2.3 and 4.0.4 and 4.1 devices but I only have a single audio device to test against. Some users have reported that it's not working for them, so if anyone does try this I would appreciate any feedback if it works or doesn't. If it's not working for you could you please tell me the device, OS version and device you are trying to connect to. Feedback here is fine, or mail me at: [email protected]
Best Regards,
Jamie
UndeadCretin said:
I have now added the ability in MacroDroid to connect to a specific Bluetooth audio device.
Click to expand...
Click to collapse
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Kaibosh said:
Awesome to hear.. I'll give it a test run when I get a chance and get back to you with results.. Just a query - what's the system resource usage of MacroDroid? I currently use Tasker, and am more than happy to buy and use MacroDroid for this one single function if it works, but don't really want them both running in the background at the same time if they're using up resources.. Can MacroDroid be setup to only run when called (i.e. having a shortcut trigger it, or even better via a Locale plugin?) I know that this is probably wanting a little too much
For others, Bluetooth Auto Connect (https://play.google.com/store/apps/details?id=org.myklos.btautoconnect) has had a recent update of "New: Tasker/Local plugin - new Profile action added - Connect / Disconnect actions supported" which sounds promising.
I never got the app to work previously (it just never connected), but others may have better luck. I haven't tried it since the update.
Click to expand...
Click to collapse
The resource usage of MacroDroid should be very low as it is effectively dormant in most cases. MacroDroid does run as a foreground service so it displays a persistent icon in the notification bar. If this annoys you there is an option in settings to turn off the foreground service. In most cases it will still work but YMMV. Anyway you can get the basic functionality for free, so you can give it a try and see how it works for you.
Regards,
Jamie
I have just submitted an updated (V1.3.8) that will hopefully solve the issue some users were seeing with the Bluetooth audio connection. I appreciate any feedback if it works (or not) for you....
Car Music Connector
Hello,
In addition to A2DP profile Car Music Connector waits for Headset profile to be connected by default. This is more reliable for most car bluetooth enabled stereos. If you are using it with A2DP only device you need to disable "Wait for Headset Bluetooth connection" in settings.
Hope that helps.
Alexander Shakhov.
Car Music Connector author.
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
klau1 said:
An amazing One click - Connect 2 Specific Bluetooth device for A2DP and Phone app:
Bluetooth Pair
https://play.google.com/store/apps/details?id=com.gnssoftworks.bluetoothpair
found it very useful for swapping bluetooth headphones between devices WITHOUT turning off Bluetooth entirely or going into the settings menu.
Example Use Case:
I have one Stereo Bluetooth headset with mic (two profiles - phone and A2DP audio)
I have one Android Phone and one Android Tablet.
Phone Profile is always connected to the Android Phone, but the A2DP audio changes depending on which device you want to listen to music from.
Normally, if you want to listen to audio from the Tablet when your headset's A2DP profile is connected to the phone, you'd have to first go to the settings menu of the phone, and disconnect the A2DP, leaving Phone Profile connected. Then go to the settings menu on your tablet and connect the A2DP only.
Then you'd have to do the opposite if you want to listen to audio from the Phone again.
Takes a long time.
With Bluetooth Pair, you can specifically connect or disconnect to a specific device and specific profile (phone / a2dp) by widgets.
So you won't have to turn off the bluetooth completely on one device just to allow your headset to connect another device. Nor do you need to go into settings anymore.
1.) Just tap on the A2DP device specific widget on the phone to disconnect, the A2DP Profile from the phone
2.) go to the Tablet, and tap on the A2DP device specific widget to connect the A2DP profile of the headset to the Tablet
Two taps!
Click to expand...
Click to collapse
Awesome! Gonna download it now and try it in the morning... but ya still get the thanks regardless of how it works for breathing life into this thread
SOLVED! see my reply below
Hello all.
I just got my new LG V30. An amazing smartphone.
Only trouble I have is volume sync when using my Sennheiser PXC550 bluetooth.
Volume up and down on the headset does not sync with volume on the phone.
I have tested some other headset and the only one I managed to test out that the sync worked was with Sony WH-1000XM2.
Anyone here tested other headset and it's working?
Problem SOLVED!
LG Nordic raised the question to LG South-Korea and they came back with the following answer and solution:
"Volume sync with bluetooth can only be guaranteed with certain tested devices.
The list is as follows;
LG HBS series, Sony MW600 / WH-1000XM2 / WH-1000X,
Apple BeatsSolo Wireless, Plantronics Backbeat Go,
Jabra MOVE / COACH / PULSE, Bose QuietComfort 30/35,
B&O H5 / H7 / H9 / H9i
This is also probably given if they have the correct AVRCP version.
Regardless; We have a tip that can make it work anyway;
1. Connect smartphone with Bluetooth headset.
2. Settings> Network> Bluetooth> Select the headset settings icon (right)>
Edit the name of the device> Rename the device name as "ABS-DO-ENABLE".
3. Disconnect the headset> Reconnect the headset."
I have testet this on my Sennheiser PXC550 and it works!
Volume now syncs on BT.
Hey thanks a thousand times! I have the same headset (PXC 550). The best piece of hardware I ever owned. I will try that tip because this was the only point I disliked.
So lucky I came across your thread
---------- Post added at 08:36 PM ---------- Previous post was at 08:20 PM ----------
Worked for me too! Thanks again.
Nice tip! Works for my BT headset also. Any idea how to make it work for more than one BT device - not connected at the same time, but I have a few different headsets.
Thanks for this. Just got it working with my Jabra elite 65t. Was driving me crazy!
fclifton said:
Nice tip! Works for my BT headset also. Any idea how to make it work for more than one BT device - not connected at the same time, but I have a few different headsets.
Click to expand...
Click to collapse
This was driving me bonkers too, but I think I've got it figured out. Name each device with the same prefix, but add a bit to the end to specify which each is. Here's how I have it set up:
ABS-DO-ENABLE (headphones)
ABS-DO-ENABLE (car)
ABS-DO-ENABLE (speakers)
Wonky, yeah, but at least it's working now.
Hey there,
i can confirm this workaround exept on behalf of the of the time this is working. When i delete my device from known devices and reconnect it afterwards while renaming it to the above pattern it works exactly one time. After a reconnect it behaves like before. Im assuming there might be some side effect regarding the used connection protocol. Do you know which AVRCP Version is used at your device ?
Tymo55 said:
Hey there,
i can confirm this workaround exept on behalf of the of the time this is working. When i delete my device from known devices and reconnect it afterwards while renaming it to the above pattern it works exactly one time. After a reconnect it behaves like before. Im assuming there might be some side effect regarding the used connection protocol. Do you know which AVRCP Version is used at your device ?
Click to expand...
Click to collapse
Hi, @Tymo55.
My headphone device, Sennheiser PXC550, uses AVRCP ver. 1.5 according to the manual.
I recommend you run the native LG app "Smart doctor", "optimize device" and reboot your LG V30-phone.