Hi Guys,
I have 3 android devices (xperia s, htc one x and a galaxy s3) connected to a wifi network. This is kind of a protected network and there is a firewall involved. Also the devices are getting IP via DHCP. The problem is that i am able to access web site via browser but when i try from the application, its showing i don't have internet connection. There is no proxy configured in this network. There is an IP filtering in the router which filters the IPs starting with a particular series. But the web site and the application which i am trying to use are supposed to use this IP series.
I've come across issues with internet connections on mobile devices. This might not work for you, but it has worked for me in the past.
I assume your devices detect all of the settings you need automatically?
If so, you may need to manually change some things.
1) Check your IP and make sure it's set right for your network
2) Check your DNS settings. Sometimes the default ones don't work properly.
Try:
8.8.8.8
8.8.4.4
These are from Google's OpenDNS and have served me well in the past.
If all else fails, check the network itself.
Hope this helps
Sent from my GT-I9300 using Tapatalk 2
SeraphSephiroth said:
I've come across issues with internet connections on mobile devices. This might not work for you, but it has worked for me in the past.
I assume your devices detect all of the settings you need automatically?
If so, you may need to manually change some things.
1) Check your IP and make sure it's set right for your network
2) Check your DNS settings. Sometimes the default ones don't work properly.
Try:
8.8.8.8
8.8.4.4
These are from Google's OpenDNS and have served me well in the past.
If all else fails, check the network itself.
Hope this helps
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for the reply.. but as i mentioned earlier, the device is getting IP and other stuffs via DHCP. I am not allowed to configure something statically. It has to come via DHCP. But the interesting fact is that an iPAD in the same network is able to get internet in both browser as well as applications.
Hey, if you need to get settings via DHCP then you should talk to your network admin for the settings
Sent from my GT-I9300 using Tapatalk 2
SeraphSephiroth said:
Hey, if you need to get settings via DHCP then you should talk to your network admin for the settings
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I am getting all the settings perfectly.. hope haven't read my first post.. i am able to browse via browser.. the problem is with the apps.. that y am confused about.. i know this kind of a problem may arise when we have a proxy configured in the network.. but we dont have a proxy in the network.. in fact an ipad hooked up to the same network works totally fine..
Did you get your apps working?
Nope..still facing the same issue.. internet is available in browser. but not in the apps..
There is no problem with your phone. I am sure that changing your router will fix this problem. Try another router with your internet connection and tell me if that worked.
Press thanks if I helped you!
We have tried that as well.. The situation got little worse with the new router. Now Internet is not working with ipad as well. But it's working in browser for both ipad and android. Another thing I have observed is that the Web pages load blazing fast in a windows and blackberry but the same site loads very slow in android and ios. As I mentioned earlier, the network is having a high security with firewall and encryption. Is there any limitations for android and ios to work with these kind of highly secure network??
Sent from my Galaxy Nexus using xda app-developers app
amith007 said:
We have tried that as well.. The situation got little worse with the new router. Now Internet is not working with ipad as well. But it's working in browser for both ipad and android. Another thing I have observed is that the Web pages load blazing fast in a windows and blackberry but the same site loads very slow in android and ios. As I mentioned earlier, the network is having a high security with firewall and encryption. Is there any limitations for android and ios to work with these kind of highly secure network??
Sent from my Galaxy Nexus using xda app-developers app
Click to expand...
Click to collapse
I think that the firewall is the main culprit. Try disabling the firewall if you can.
Sent from my Fanta9stic using Tapatalk 2
Ya.. even i feel the same... but its a secure network and firewall is a vital part.. so we cant disable it.. is there any known limitations for android to work with firewall or networks with these kind of setup.
Just mess with WiFi settings
amith007 said:
Hi Guys,
I have 3 android devices (xperia s, htc one x and a galaxy s3) connected to a wifi network. This is kind of a protected network and there is a firewall involved. Also the devices are getting IP via DHCP. The problem is that i am able to access web site via browser but when i try from the application, its showing i don't have internet connection. There is no proxy configured in this network. There is an IP filtering in the router which filters the IPs starting with a particular series. But the web site and the application which i am trying to use are supposed to use this IP series.
Click to expand...
Click to collapse
Hi - I was experiencing this on a Galaxy Nexus with no SIM card only connected to WiFi - on a WiFi router that used to work.
The solution was to
1. Open up DHCP settings on the phone (Settings -> WiFi -> My Network -> Advanced)
2. Manually set them to something that's wrong.
3. Save.
4. Set DHCP back to what it was.
5. Save.
May not work for you, but for me, after about 30 seconds the app store and other apps started working again without having to do a factory reset or doing anything to my router/network.
Let me know if this helped!
Related
Hello wondering if anyone can help.
Bought the device yesterday, galaxy player 5.0
The only way I can connect to the wifi is if I disable WEP and have the router open.
When I use WIFI, either from the cell phone or my home WIFI using WEP, the device is stuck in obtaining IP address, as soon as I remove the WEP and have the router open, it connects.
None of my other devices have this issue, only this one.
Any ideas?
or
Should I return it?
Thanks.
I found that if my router was broadcasting its SSID my 5 would connect, if it was hiding the SSID it would not (just sat there searching for IP). Maybe that's the problem?
Mine has problem too on my belkin54g (open config), connect and disconnection all the time pretty annoying, i really hope there will come a fix out from samsung since it came with 2.3.5 update....
Thanks!!!
Thanks guys got it working.
Changed password on the router and did a reset to it.
Seems that did the trick.
Almost returned the player.
And the worst is that I had already installed a shield for the screen, 15 bucks!!!
Anyway, thanks for the response!!!
Hidden SSID need patch for YP-G70
Just install HiddenSSID Enabler from market, it'll work for YP-G70. You need run it once and get your hidden wifi connected, then can uninstall it. Looks like it is just a patch but really works.
I was under the impression you could use a hidden SSID under stock 2.3.5. Under Wifi Settings, there is the "Add Wi-Fi network" option, and it looks like it can be used for hidden SSIDs.
apapousek said:
I was under the impression you could use a hidden SSID under stock 2.3.5. Under Wifi Settings, there is the "Add Wi-Fi network" option, and it looks like it can be used for hidden SSIDs.
Click to expand...
Click to collapse
No, it won't work coz hidden SSID not supported by GB.
Sent from my YP-G70 using xda premium
Try using WPA instead of WEP. WEP is ancient, and some newer wifi chipsets don't interoperate well with it because it's so old and it's been HIGHLY recommended to ditch it on routers for at least 5 years. WEP was known to be insecure almost a decade ago!
Sent from my GT-P7510 using Tapatalk
Someone correct me if I'm wrong but it seems like I remember reading a few years ago that hidden ssid's were not part of the 802.11 b,g, or n specifications. I thought that while a lot of devices had that function, it wasn't exactly "compliant".
Meticulus said:
Someone correct me if I'm wrong but it seems like I remember reading a few years ago that hidden ssid's were not part of the 802.11 b,g, or n specifications. I thought that while a lot of devices had that function, it wasn't exactly "compliant".
Click to expand...
Click to collapse
Yes, that's true. I haven't seen any android smartphone on GB (don't know what's in ICS) can connect hidden SSID unless apply the hidden SSID Enabler patch. However, iphone / ipod has no problem.
Sent from my YP-G70 using xda premium
I am constantly losing my connection with wifi, i got samsung galaxy player s wifi 3.6
wifi disconnect/reconnect fixed
On my 4.0 US, the wifi would disconnect and reconnect constantly. To fix it, go to ur network (on windows go to start and click network or type in ur IP address) and go to LAN settings. Change the dhcp lease time to 2 weeks or anything bit forever. It resolved my issue completely
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
HcMAX said:
Hello
Im a proudly owner of a S3 and a GNexus and I have some problems regarding Wi-Fi, I know that this is not an S3 problem but its and android problem but perhaps someone can help me in here..
the thing is, I have two routers in my house, one is the master one for cable/internet company and the other is and range extender to expand the signal of the wireless lan....
every morning, when I wake up, if I go to the floor where is the first router both my S3 and Gnexus connect successfully to the wireless network and evevyrthing works fine....however if I go to the floor where the bridge/extender is located, both phones detects the wireless network, however can't connect to it, on wireless settings says...Obtaining ip address...and stays there for ages...and nothing...cant connect...for me to connect to the bridge, I have to restart the bridge and both phones connect immediately...
please any ideas??
thanks and best regards,
hugo
Click to expand...
Click to collapse
Is it password protected? If so try making it 'open' or change the encryption type.
Skander1998 said:
Is it password protected? If so try making it 'open' or change the encryption type.
Click to expand...
Click to collapse
Hi,
first thanks for the quick reply,
yes the network is password protected...I changed the encryption type for the WPA not the WPA2 and the problem still persists...
the thing that kills my brains is that, to connect to the bridge I must restart the the access point every morning,....
thanks
Do you have DHCP enabled on the 2nd router?
larryk said:
Do you have DHCP enabled on the 2nd router?
Click to expand...
Click to collapse
yes, I guess so....., should DHCP be enabled or disabled?
sorry but this situation is driving me crazy.....
I cant connect to the brigde/extender network right now with both my android phones and android tablet, however with my laptop running windows 8 I can......
wth??????
this is so frustrating!!!!!
Are you sure the second device extends the main access point and not just create a new WLAN?
Have you updated the firmware of both devices?
What devices do you have?
Am I understanding correctly that your laptop does work even though both Android devices don't (before you reboot the extender)?
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Nope...its not creating another wireless lan... it extends the main plan correctly cause my laptop connects perfectly to the Wi-Fi from the extender even prior to the restart of the extender....
The devices are...main router from the ISP- Thomson
Range extender- tp link 701nd
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Both have latest firmware? Might be a bug in the WiFi driver of the AP/ROUTER... or it's in Android.... you will need to test by trial and error I guess...
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
HcMAX said:
Ok..
Do you guys know anything if I must have my IP static or dynamic?
Thanks
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Dynamic would be the friendliest to work with... you could try if it's a DHCP issue by setting a fixed IP when the problem occurs, but I don't think it is.
This is not a problem with the phone(s)....is with the router config. Contact the manufacturer for further assistance...
HcMAX said:
yes, I guess so....., should DHCP be enabled or disabled?
Click to expand...
Click to collapse
If you got a router and a range extender, there's nothing you need to fiddle with because the range extender will just Relay DHCP requests between client and master router.
Two routers* pushing out IP addresses is a no go, there will be a conflict in your scenario, and all range extenders will of course take this into account.
If you had two "real" routers*, it would still be possible to set everything up, although then there's a lot to take into account.
* Router is a inaccurate term used for the consumer grade combination devices. They're in fact a router, a switch, and a wireless access point bundled in a neat package. Sometimes with a xDSL modem or something on the external interface of the router.
Try setting the IP to static and more important, try giving it a default gateway to the routers IP. That should make it easy for your phone to directly look for the gateway it is looking for.
Sent from my Galaxy S3
I have three routers, one main, one extender, one repeater (creating a whole new network for other building). Both main and repeater are the same network. All is config as per DD-WRT documentation. All three have latest DD-WRT.
After trying many things, all I can say is the (or mine at least) S3 always has trouble when many APs are nearby. I don't use VOIP because of that (it could disconnect at any time).
Next step on my list is to have 3 different SSIDs (only two now) and try using tasker to debounce the wifi switching (if that is even possible).
I have a Samsung Galaxy S3 (Mini) with Jelly Bean 4.1.2. I recently bought iPad 4 (Wifi only) and decided to try to do some tethering with my phone. I entered the "Tethering and portable hotspots" submenu and paired up successfully with the iPad. However, I couldn't access the Internet with the iPad even though the connection to my S3 was okey. Everything just seemed to be loading and loading, and Chrome said something about DNS servers. I gave up and tried to Bluetooth-route. Again I was successful in connecting the two devices with the link symbol appearing in the upper left of the iPad's screen. Yet again the Internet did not work.
I should mention that I live in a country where there's no tethering regulation so I can just use the default tethering settings. I did think about if using Avast, power saving mode or anything other affected the tethering process, but after turning Avast and power saving mode off, nothing happened. I also double-checked that I could access Internet via my phone. I also double checked that I had my mobile data on.
There isn't any setting in S3's "Tethering and portable hotspots" submenu that I could try to change (I've tried tethering with and without a password). I can do something about hotspot Wifi-connection from the iPad (according to the manual):
Adjust the settings for connecting to a Wi-Fi network: Tap next to a network. You can set an HTTP proxy, define static network settings, turn on BootP, or renew the settings provided by a DHCP server.
Click to expand...
Click to collapse
However, I cannot do anything if I try to create a hotspot using Bluetooth.
I would appreciate help immensely!
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
vengeance1990 said:
On the tethering section, and since you only doing it for an ipad, go to configure the access point and tap advanced settings. Try changing the broadcast channels from auto to 10.
I work on a technical support desk and it seems that Ipads are very very fussy on lower channels, i am unable to test this as i don't own an Ipad but it may be worth a shot.
Click to expand...
Click to collapse
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Tigerman82 said:
Thank you for this suggestion. Unfortunately it did not work. I also tried channels 4 and 11 instead of Auto without success.
Click to expand...
Click to collapse
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Tigerman82 said:
I just wanted to let you guys know that I have solved the issue. The trick was to add my provider's internet information (server, port) to iPad's settings. This is weird as with my old phone, Samsung Bada, I just had to create a Wifi hotspot with a few clicks and that's it.
Click to expand...
Click to collapse
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
leinad said:
Hi Tigerman82.
Could you please be more precise regrading the solution you found : What configuration did you make in you iPad, which information, in which configuration menu ?
Thank you for your help.
Click to expand...
Click to collapse
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Tigerman82 said:
I first created the Wifi hotspot connection between SG3Mini and the iPad. In SG3Mini, I entered Settings -> More Settings -> Mobile Networks -> Access Point Names (APNs) -> *chose my provider's Internet/Wap settings* -> wrote down Proxy, Port, (User Name, Password)
Then in iPad, I entered the Wifi-settings, Tapped the > next to the SG3Mini's Hotspot connection and added the APN info in the HTTP Proxy settings. I originally tried to use the User Name and Password but it didn't work so I just used Proxy and Port. Then I tapped the "Renew" option.
After this, I could tether without problems.
Click to expand...
Click to collapse
Thanks. Will give it a try.
A little confused
vengeance1990 said:
I asked on my friends to test this he has an s3 and an ipad mini, he doesnt use the stock tether. But he said clockwork mod tether works perfectly well on his. I believe it is free from the play store. Perhaps give that a try.
Sorry I couldnt be more helpful
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
How was he able to test clockwork mod tether with an ipad mini as this is a usb tether and my ipad mini doesn't have a usb port?
Howdy all. I have a wifi at home which works with web authentication i.e. you connect your phone to wifi and on opening a browser, it redirects you to an authentication site wherein upon entering your username and password, you get connected. The authentication page requires you to keep the tab open and work with another tab, otherwise you lose the connection. When working on a PC, it works like a charm. I keep the tab open and wifi sticks for long even when you're not active. But on a smartphone (I have a Galaxy S3 here), it's a living hell trying to keep it stay connected. I've tried keeping the browser app resident in memory, created a tasker script to browse the URL and reconnect on certain intervals which honestly is too tedious and needs a better solution, used wifi web login apps which don't work to my satisfaction i.e. don't connect just when connection is lost; but in all these cases, the connection just seems to disconnect making me reconnect time and again :/. I would be utterly grateful to anybody who could suggest a solution for me for this as this is seriously making me lose my sleep.
ubz91 said:
Howdy all. I have a wifi at home which works with web authentication i.e. you connect your phone to wifi and on opening a browser, it redirects you to an authentication site wherein upon entering your username and password, you get connected. The authentication page requires you to keep the tab open and work with another tab, otherwise you lose the connection. When working on a PC, it works like a charm. I keep the tab open and wifi sticks for long even when you're not active. But on a smartphone (I have a Galaxy S3 here), it's a living hell trying to keep it stay connected. I've tried keeping the browser app resident in memory, created a tasker script to browse the URL and reconnect on certain intervals which honestly is too tedious and needs a better solution, used wifi web login apps which don't work to my satisfaction i.e. don't connect just when connection is lost; but in all these cases, the connection just seems to disconnect making me reconnect time and again :/. I would be utterly grateful to anybody who could suggest a solution for me for this as this is seriously making me lose my sleep.
Click to expand...
Click to collapse
what is the reason you don't want to use wpa2 for a home network?
mjz2cool said:
what is the reason you don't want to use wpa2 for a home network?
Click to expand...
Click to collapse
Dunno much about wifi security protocols but this is as my ISP provided. I've tried modifying the router protocols but nothing seem to make the web authentication go away.
ubz91 said:
Dunno much about wifi security protocols but this is as my ISP provided. I've tried modifying the router protocols but nothing seem to make the web authentication go away.
Click to expand...
Click to collapse
ah, ok, what kind of router is it?
mjz2cool said:
ah, ok, what kind of router is it?
Click to expand...
Click to collapse
A Motorola SBG901 wireless router.
ubz91 said:
A Motorola SBG901 wireless router.
Click to expand...
Click to collapse
is there any security settings tab? or maybe it's under the wireless settings tab
mjz2cool said:
is there any security settings tab? or maybe it's under the wireless settings tab
Click to expand...
Click to collapse
Nope, even setting security protocol to open shows the auth page. Might have to find a different solution for this.
ubz91 said:
Nope, even setting security protocol to open shows the auth page. Might have to find a different solution for this.
Click to expand...
Click to collapse
it could be the provider is forcing it, have you tried another router? normally, the web authentication is a proxy, so that could be the modem, or at the provider's end
mjz2cool said:
it could be the provider is forcing it, have you tried another router? normally, the web authentication is a proxy, so that could be the modem, or at the provider's end
Click to expand...
Click to collapse
Don't think the router has anything to do with this. Only the provider URL loads in the browser for authentication. So yeah, would know if it had something to do with the router.
Hello everyone.
At my work they set the wireless with two channels. One is open to everybody with an email verification and allowed users to connect for 2 hours a day and the other is a hidden SSID that the workers can use all the time. In my iphone I have no issues. I add the network manually and it connects. But on my Sony xperia Z1 when I go to wifi and add the hidden SSID it just said not in range while the other network is in range. So far I tried the Hidden SSID enabler app with no luck. Any suggestions? My device has kitkat 4.4.2 and is rooted.
Thanks in advance
cradle66 said:
Hello everyone.
At my work they set the wireless with two channels. One is open to everybody with an email verification and allowed users to connect for 2 hours a day and the other is a hidden SSID that the workers can use all the time. In my iphone I have no issues. I add the network manually and it connects. But on my Sony xperia Z1 when I go to wifi and add the hidden SSID it just said not in range while the other network is in range. So far I tried the Hidden SSID enabler app with no luck. Any suggestions? My device has kitkat 4.4.2 and is rooted.
Thanks in advance
Click to expand...
Click to collapse
Yes, hidden networks are tough to get working with android. My experience with this is that when the hidden network won't connect and then not even recognize it's either that the psk/psk method don't match OR the network is Wireless-N only, which many newer android phones still can't connect to, while the iPhone can. -.- (the *only* thing apple is doing right I guess)
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
aarongillion63 said:
Yes, hidden networks are tough to get working with android. My experience with this is that when the hidden network won't connect and then not even recognize it's either that the psk/psk method don't match OR the network is Wireless-N only, which many newer android phones still can't connect to, while the iPhone can. -.- (the *only* thing apple is doing right I guess)
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Apple has a flaw too however.
When a network requires you to log into a browser page with a password and username, the Iphone automatically opens the browser page to have you log into the new network.
This opens up drive by attacks to Iphone users connecting to open networks which can then Jailbreak the older firmwares.
I believe this is true, but don't rely on me. I don't even own an Iphone. lol
Another thing I didn't mentioned is that I cannot access routers settings. Also a friend of mine with a galaxy s4 can connect on hidden network. Anyone has the same problem?
Can you specify what router you have? Model #?
Thanks
Sent from my HTCONE using XDA Free mobile app
Thank you for the response...Its a belkin but the company who set up the network can only access to the routers settings. I'm not sure about the model but the thing is that I can connect with other devices and not with my Z1. It can find the non hidden network which works for a couple of hours and when I manually add the hidden network it says not in range. a friend of mine with his samsung galaxy s4 connected earlier and what I noticed was that when he was entering the hidden networks details it had the options cancel and connect. When I was doing the same the options was cancel and save. So he could connect and I just had the hidden network saying just out of range. That's all. I don't know if it works on earlier android versions like that but I cannot connect on the hidden network.
aarongillion63 said:
Can you specify what router you have? Model #?
Thanks
Sent from my HTCONE using XDA Free mobile app
Click to expand...
Click to collapse
cradle66 said:
Thank you for the response...Its a belkin but the company who set up the network can only access to the routers settings. I'm not sure about the model but the thing is that I can connect with other devices and not with my Z1. It can find the non hidden network which works for a couple of hours and when I manually add the hidden network it says not in range. a friend of mine with his samsung galaxy s4 connected earlier and what I noticed was that when he was entering the hidden networks details it had the options cancel and connect. When I was doing the same the options was cancel and save. So he could connect and I just had the hidden network saying just out of range. That's all. I don't know if it works on earlier android versions like that but I cannot connect on the hidden network.
Click to expand...
Click to collapse
Huh. I looked up your phone and it's compatible with all the 802.11 specifications, Wireless-N included. Personally I've had bad experiences with Belkin routers, I trashed mine cause the usb sharing wouldn't work . I say try creating another hidden network with your own router, just to test whether it's an issue with your phone or with your router.
--
Say thanks if I was of help,
Sent from my SCH-I605 using XDA Free mobile app
Do you have any Aplication for hidden ssid waifai showing and connect to the device. Please reply sir please.