Related
Hi, i bricked my phone flashing KI3 with new bootloader found in here, but Odin got stuck so i removed the phone.
Now it does not go in recovery and in download mode neither. I have already trying using the JIB with no luck
What to do now?
Answering to a question.
arceangel said:
Does it have a form of hboot? I fixed my brothers bricked galaxy using Odin but if u can put the SAPPIMG file on a SD card and boot to hboot mode that might work. If that's what ur already mean by JIG then mybad
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
What's hboot? As i said i can't enter in download mode or recovery mode
AFAIK The official ki3 updates the bootloader and that blocks the usb jig.
Sent from my GT-I9100 using xda premium
When you try to power the phone on, what happens?
tjjensen23 said:
AFAIK The official ki3 updates the bootloader and that blocks the usb jig.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
The JIG does not get blocked with the new bootloaders, it just does not clear the counters in the same way, but DLM can still be entered with the JIG.
achillies400 said:
When you try to power the phone on, what happens?
Click to expand...
Click to collapse
I can't power on the phone. It's totally dead
Recovery is as follows
One enter Download Mode
No Download Mode then try USB Jig to force download mode .
Phone off put usb jig in usb port boots to download mode .
Fails
Then its a service centre job .
jje
plug your jigg in your phone and then you will come in the download mode,
don't restart your phone. plug your usb-cable in, then open ODIN
find stock rom and flash it.
Do you guys even read what he said? JIG DID NOT WORK...
Flowlance said:
Do you guys even read what he said? JIG DID NOT WORK...
Click to expand...
Click to collapse
Bro, I know but sometimes you can not open Download mode, so with JIG you can come in to Download mode
then you flash the stock with ODIN
Cangir said:
Bro, I know but sometimes you can not open Download mode, so with JIG you can come in to Download mode
then you flash the stock with ODIN
Click to expand...
Click to collapse
Jeez no download mode jig does not work as posted .
I gave a run through of correct route just in case OP was doing something wrong with a return to service centre if all failed .
jje
Yeah the JIG does not work, i will contact a service centre tomorrow
Just curious... Does anyone know what sort of gear a service centre might have that can talk to a SGS2 after its gone to such a 'dark place' that even a JIG can't wake it up? I always thought a JIG was all you needed...
siganid said:
Just curious... Does anyone know what sort of gear a service centre might have that can talk to a SGS2 after its gone to such a 'dark place' that even a JIG can't wake it up? I always thought a JIG was all you needed...
Click to expand...
Click to collapse
Jtag
10char
Hello , I rooted my s II a while ago but I wanted my warrenty back so I wanted to unroot but I didn't have to usb Jig.
But , today I updated my firmware on kies and root checker says my root is gone so does that mean the counter is reset ? and also how do I check the counter?
Sorry for such nooby questions but well I got to start somewhere.
A USB jig is currently the only way to reset the counter. You can confirm that it is still > 0 by booting into download mode (vol down+home+power).
oinkylicious said:
A USB jig is currently the only way to reset the counter. You can confirm that it is still > 0 by booting into download mode (vol down+home+power).
Click to expand...
Click to collapse
Exactly what I was looking for , thanks !
I have a usb jig on the way so I should be cool after then will I have my warranty back?
http://cgi.ebay.ie/ws/eBayISAPI.dll..._trkparms=algo=LVI&its=I&otn=2#ht_3611wt_1163 the counter I ordered this okay?
Yeh, thats what you need.
evening
about to rma my sgs2 but stuck in a bootloop trying to flash via mobile odin
any help?
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
sutty86 said:
cheers bought a jig today, its in odin mode saying downloading, do i now put my usb
Click to expand...
Click to collapse
Stock rom post then reset counter if need be .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
cheers just need to find my usb lead now
adrian5800 said:
Use a usb jig to get into download mode and then flash via odin.
Cheers
Ades
Click to expand...
Click to collapse
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
he'll need a custom kernel for that, jig is much safer
gr4ndm4st3r_bl4ck said:
Or he can just download ANY of the ROM managers and use the "boot into download mode" option trololol...
Click to expand...
Click to collapse
Yeah that'd work. He's in a bootloop...
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
sutty86 said:
guys still having dramas managed to get hold of a windows pc, got odin loaded
downloading 2 stock orange firmwares from intratechs thread and also the old litning
still stuck in bootloop!!!
please no phone now for 4 days!
Click to expand...
Click to collapse
Look , i had the bootloop once. I tried to power down my device, but it wouldn't work. Took out the battery and it powered on itself - bootloop. Try holding Volume Up + Home + Power buttons to get into recovery mode and then clear data/cache. I remember holding the buttons for 10 seconds before it actually rebooted to recovery
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
ultramag69 said:
But if you read the heading of this thread gr4ndm4st3r_bl4ck, it says the home button is broke....
Click to expand...
Click to collapse
I'm not sure his button is really broke , cuz he didn't mention it anywhere in his post , just in the heading... Which makes no sense, who does any kind of flashing if their hardware button is broke... If it really is , then it's his fault for not taking it to repair first...
My phone was playing up recently thinking it was charging when it wasn't plugged in. Then one night I tried plugging it and and bang, ripped all the contacts off the inside of the micro USB.
Phone continued to work until the battery died. Now the phone wont turn on with a fresh battery... Any advice as to why? Or at least what I can do. I was running cm9 so I guess that counts out warranty?
Thanks
70m1 said:
My phone was playing up recently thinking it was charging when it wasn't plugged in. Then one night I tried plugging it and and bang, ripped all the contacts off the inside of the micro USB.
Phone continued to work until the battery died. Now the phone wont turn on with a fresh battery... Any advice as to why? Or at least what I can do. I was running cm9 so I guess that counts out warranty?
Thanks
Click to expand...
Click to collapse
Can you get to download mode? Or is it completely dead?
Sent from my GT-P7510 using xda premium
Greetings,
I'm having a similar issue - I was trying to root my wife's Samsung Galaxy SII GT-I9100G and now all I see is a yellow triangle w/ an exclamation mark...
Odin 3v1.85 (Android+SLP) does not recognize the device.
Neither can I boot to download mode or recovery mode.
I think I'm in deep trouble...
Any guidance is greatly appreciated,
Bermuda
70m1 said:
My phone was playing up recently thinking it was charging when it wasn't plugged in. Then one night I tried plugging it and and bang, ripped all the contacts off the inside of the micro USB.
Phone continued to work until the battery died. Now the phone wont turn on with a fresh battery... Any advice as to why? Or at least what I can do. I was running cm9 so I guess that counts out warranty?
Thanks
Click to expand...
Click to collapse
kevinmccottry said:
Greetings,
I'm having a similar issue - I was trying to root my wife's Samsung Galaxy SII GT-I9100G and now all I see is a yellow triangle w/ an exclamation mark...
Odin 3v1.85 (Android+SLP) does not recognize the device.
Neither can I boot to download mode or recovery mode.
I think I'm in deep trouble...
Any guidance is greatly appreciated,
Bermuda
Click to expand...
Click to collapse
can u get in to download mode or recovery mode
neerajganga said:
can u get in to download mode or recovery mode
Click to expand...
Click to collapse
No Sir - I cannot.
kevinmccottry said:
No Sir - I cannot.
Click to expand...
Click to collapse
Check your model number on the label under the battery. What is it?
70m1 said:
My phone was playing up recently thinking it was charging when it wasn't plugged in. Then one night I tried plugging it and and bang, ripped all the contacts off the inside of the micro USB.
Phone continued to work until the battery died. Now the phone wont turn on with a fresh battery... Any advice as to why? Or at least what I can do. I was running cm9 so I guess that counts out warranty?
Thanks
Click to expand...
Click to collapse
If you can see an exclamation mark it means your phone is still alive.
Run odin 1.85 >>> boot your phone >> then connect it to your PC odin should recognize it wait for the com port to turn yellow.
Flash another firmware ur done.
Vinieme said:
If you can see an exclamation mark it means your phone is still alive.
Run odin 1.85 >>> boot your phone >> then connect it to your PC odin should recognize it wait for the com port to turn yellow.
Flash another firmware ur done.
Click to expand...
Click to collapse
You have to put it in download mode before you plug it in to the computer to be able to flash firmware through odin
Sent from my GT-I9100 using xda premium
kilometers4 said:
You have to put it in download mode before you plug it in to the computer to be able to flash firmware through odin
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
Not necesarry i've soft bricked my phone before so I know as I did the same
Not necessarily. The NAND can still be stuffed/unfixable by the user & still boot to a warning triangle.
No download mode, no boot & no connectivity b/w phone & PC = stuffed phone & return to service centre or JTAG.
Vinieme said:
If you can see an exclamation mark it means your phone is still alive.
Click to expand...
Click to collapse
ctomgee said:
Check your model number on the label under the battery. What is it?
Click to expand...
Click to collapse
Good Morning - the model number is: GT-I9100G
Have u tried flashing from the boot screen?
Sent from my GT-I9100 using XDA
Do you have a USB JIG that you could use to try force your phone into download mode? If not, you can either make one (guide found on XDA), or else buy one off eBay for like £2. It's worth a shot.
Chris.
kevinmccottry said:
Good Morning - the model number is: GT-I9100G
Click to expand...
Click to collapse
Try this.
And in the future make sure anything you flash to that particular phone is meant for the i9100G, not the i9100.
Edit to add: if you can't get to download mode with the button combination, you'll of course need a jig as themadba suggests.
Good day gentlemen,
It seems that my S3 would not start/boot up as it only shows the Samsung Galaxy SIII logo and keeps restarting itself. I rooted it before and it worked but the issue was that when I tried to flash a ROM it apparently failed and then the above happened. Any helps would be highly appreciated. Also I'd like to note that I am able to access Download Mode.
Flash a stock ROM
Sent from my GT-I9300 using xda app-developers app
You need to enter recovery mode and wipe all data and caches, then reboot and see what happens...
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
Thanks, wipe and reset worked for me.
RichardBronosky said:
Thanks, wipe and reset worked for me.
Click to expand...
Click to collapse
press thanks button is better
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
i tried to do the same as per you instruction but still my phone showing "samsung galaxy s3"(my phone doesn't go into recovery mode)
and if i go into download mode and then try to recover emergancy recovery into samsung kies what i got is i have attached with this post.
please help me sir
miluvyas said:
i tried to do the same as per you instruction but still my phone showing "samsung galaxy s3"(my phone doesn't go into recovery mode)
and if i go into download mode and then try to recover emergancy recovery into samsung kies what i got is i have attached with this post.
please help me sir
Click to expand...
Click to collapse
What is your problem ??? same as thread title ???
jje
JJEgan said:
What is your problem ??? same as thread title ???
jje
Click to expand...
Click to collapse
my problem is there is problem with my rom and hence i am getting the same problem mentioned earlier in this thread. i used everything including samsung galaxy s 3 root toolbox kit 7.0
but then also my pc is not showing me phone status.
my phone is just having only downloading mode. no other thing except the "boot screen" available in my phone.
my question is... how do i overcome to this problem? i wanna re-install the stock rom which i already have. and i know how to install the stock rom. ALL I WANNA KNOW IS WHAT TO DO TO GET VISIBLE STATUS IN ODIN SOFTWARE. AS I THINK THERE MUST BE SOME PROBLEM IN DRIVER.(I TRIED SAMSUNG PHONE DRIVERS, SAMSUNG KIES AND SAMSUNG GALAXY S3 ROOT TOOLBOX KIT 7.0)
PLEASE GIVE ME PROPER DRIVER SO THAT I CAN MANAGE
THANKS
miluvyas said:
. ALL I WANNA KNOW IS WHAT TO DO TO GET VISIBLE STATUS IN ODIN SOFTWARE. AS I THINK THERE MUST BE SOME PROBLEM IN DRIVER.(I TRIED SAMSUNG PHONE DRIVERS, SAMSUNG KIES AND SAMSUNG GALAXY S3 ROOT TOOLBOX KIT 7.0)
PLEASE GIVE ME PROPER DRIVER SO THAT I CAN MANAGE
THANKS
Click to expand...
Click to collapse
In that case you need a service centre if reading the FAQS and Guides re Odin and drivers has failed . Probable damaged USB port .
jje
JJEgan said:
In that case you need a service centre if reading the FAQS and Guides re Odin and drivers has failed . Probable damaged USB port .
jje
Click to expand...
Click to collapse
Is there any other way?
cause i have htc one x too. And its drivers are working 100%. Is it possible to get proper driver from you?
miluvyas said:
Is there any other way?
cause i have htc one x too. And its drivers are working 100%. Is it possible to get proper driver from you?
Click to expand...
Click to collapse
No i don't have proper driver you installed proper driver three times already .
jje
JJEgan said:
No i don't have proper driver you installed proper driver three times already .
jje
Click to expand...
Click to collapse
Thanks man.. you know for this reason i format my pc too. But then also it wont work.. now as per you . Service center is last option.
but as per your saying.. my phone's usb driver got damaged. Right? But what it means? I used only the same data cable which i got with my phone.
is it possible that i will get this data cable issue resolved after visiting service center?
And how much possibilities to get my phone back in working condition if i will get it to service station?(asking cause i read that my phone got bricked)
miluvyas said:
my phone is just having only downloading mode. no other thing except the "boot screen" available in my phone.
Click to expand...
Click to collapse
what do you mean by "boot screen" The Samsung logo? That's not download mode
Glebun said:
what do you mean by "boot screen" The Samsung logo? That's not download mode
Click to expand...
Click to collapse
Man i wrote it wrongly... I only get two things 1 is download mode and another if i try to go for recovery my phone only stuck at samsung logo(so called boot screen )
please provide ur valuable solution
1. uninstall kies
2. install the usb drivers
3. use a different usb port/cable/pc
Google search for samsung drivers 1.4.6, I had a similar problem and the latest drivers dont recognise my device but 1.4.6 does. I would link it for you but I am on my phone.
Vengeance
Sent from my GT-I9300 using xda app-developers app
I had this problem after I ROOT Galaxy s3
All you need to do is visit this page and do all that is written in the instructions:
http : //techmell.net/android-tips/how-to-update-galaxy-s3-i9300-xxella-android-4-1-2-jelly-bean-official-firmware/
This page has helped me and now everything is fine i got official android 4.1.2
If i helped you click thanks button
CORRECT THIS HTTP I CANT POST CORRECTLY
cannot enter recovery mode
MsElise said:
enter recovery mode (hold home + volume up + power)
choose wipe data / factory reset
Click to expand...
Click to collapse
Hi, i tried it, but i cannot enter recovery mode, can only enter download mode, what should i do?
fabiolaec said:
Hi, i tried it, but i cannot enter recovery mode, can only enter download mode, what should i do?
Click to expand...
Click to collapse
Hi read the stickies on how to flash using odin, back to stock rom.