[Q] Another bricked Desire X - HTC Desire X
I will start by excusing for the messed up mail.
Have a HTC Desire X(Y13) that is bricked. It have been unlocked and rooted. Original FW. Got OTA notice yesterday. I reinstalled the recovery and locked it.
After i ran the update and rebooted, it stayed on the welcome/beats screen.
I unlocked it and reinstalled the recovery(CWM).
And now I get the “Can't mount /cache/recovery” ect.
I do have a backup from the CWM. But when trying to restore it. It exits just after it restore the boot.img.
Tried to install different roms. Both cooked and “DesireX1.14.401.1.zip".
Get’s “Installing update”. Assert failed: write_raw_image(“/tmp/boot.img”. “boot”)
I have tried to lock it and restore a stock recovery. And then run the RRU:
RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed”
It starts by erasing the user data. Says Starting and Sending. Updating Signature. And after 1min or so it fails with Error 158:Image error.
But it's a Proto ?
I can lock/unlock it. Flash boot.img and recovery’s. Have tried working with the WINTEAM loader. Same problem.
So no matter what I do, I just cant unbrick it. Any ideas on how to do that ?
Could I do an ADB format of the different partitions and flash them? ANY suggestion are welcome.
Log snippets:
0 /tmp ramdisk (null) (null) 0
1 /recovery emmc /dev/block/mmcblk0p21 (null) 0
2 /boot emmc /dev/block/mmcblk0p22 (null) 0
3 /cache ext4 /dev/block/mmcblk0p27 (null) 0
4 /data ext4 /dev/block/mmcblk0p26 (null) 0
5 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
6 /system ext4 /dev/block/mmcblk0p25 (null) 0
7 /misc emmc /dev/block/mmcblk0p17 (null) 0
8 /devlog ext4 /dev/block/mmcblk0p28 (null) 0
9 /emmc vfat /dev/block/mmcblk0p31 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
W:failed to mount /dev/block/mmcblk0p27 (Invalid argument)
E:Can't mount /cache/recovery/command
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
magiske said:
I will start by excusing for the messed up mail.
Have a HTC Desire X(Y13) that is bricked. It have been unlocked and rooted. Original FW. Got OTA notice yesterday. I reinstalled the recovery and locked it.
After i ran the update and rebooted, it stayed on the welcome/beats screen.
I unlocked it and reinstalled the recovery(CWM).
And now I get the “Can't mount /cache/recovery” ect.
I do have a backup from the CWM. But when trying to restore it. It exits just after it restore the boot.img.
Tried to install different roms. Both cooked and “DesireX1.14.401.1.zip".
Get’s “Installing update”. Assert failed: write_raw_image(“/tmp/boot.img”. “boot”)
I have tried to lock it and restore a stock recovery. And then run the RRU:
RUU_PROTO_U_ICS_40A_HTC_Europe_1.18.401.1_Radio_10.21.40.06U_1.10.40.23_release_295191_signed”
It starts by erasing the user data. Says Starting and Sending. Updating Signature. And after 1min or so it fails with Error 158:Image error.
But it's a Proto ?
I can lock/unlock it. Flash boot.img and recovery’s. Have tried working with the WINTEAM loader. Same problem.
So no matter what I do, I just cant unbrick it. Any ideas on how to do that ?
Could I do an ADB format of the different partitions and flash them? ANY suggestion are welcome.
Log snippets:
0 /tmp ramdisk (null) (null) 0
1 /recovery emmc /dev/block/mmcblk0p21 (null) 0
2 /boot emmc /dev/block/mmcblk0p22 (null) 0
3 /cache ext4 /dev/block/mmcblk0p27 (null) 0
4 /data ext4 /dev/block/mmcblk0p26 (null) 0
5 /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 0
6 /system ext4 /dev/block/mmcblk0p25 (null) 0
7 /misc emmc /dev/block/mmcblk0p17 (null) 0
8 /devlog ext4 /dev/block/mmcblk0p28 (null) 0
9 /emmc vfat /dev/block/mmcblk0p31 (null) 0
W:Unable to get recovery.fstab info for /datadata during fstab generation!
W:Unable to get recovery.fstab info for /sd-ext during fstab generation!
I:Completed outputting fstab.
Irocessing arguments.
W:failed to mount /dev/block/mmcblk0p27 (Invalid argument)
E:Can't mount /cache/recovery/command
I:Checking arguments.
I:device_recovery_start()
Command: "/sbin/recovery"
Click to expand...
Click to collapse
You need a jb optimized recovery...
Stereo8 said:
You need a jb optimized recovery...
Click to expand...
Click to collapse
Thanks. Now I can get it up and running. Can I downgrade from here ? Would like to be able to restore my backup ??
/Mads
Yes!
Flowed from my HTC branded muffin...
Surely kernel problem
Hahahahha the same here...For that we need RUU JB aways can fix the mess that we make
Related
[Q] mount points atrix vs dx2
Here is the recovery.fstab for the atrix # mount point fstype device [device2] /boot emmc /dev/block/mmcblk0p11 /cache ext4 /dev/block/mmcblk0p15 NULL ext3 /data ext4 /dev/block/mmcblk0p16 NULL ext3 /sdcard vfat /dev/block/mmcblk1p1 /emmc vfat /dev/block/mmcblk0p18 /system ext4 /dev/block/mmcblk0p12 NULL ext3 /recovery emmc /dev/block/mmcblk0p10 /osh ext3 /dev/block/mmcblk0p13 /preinstall ext3 /dev/block/mmcblk0p17 And here the dx2 # mount point fstype device /sdcard vfat /dev/block/mmcblk1p1 /dev/block/mmcblk1 /system auto /dev/block/mmcblk0p12 /cache ext3 /dev/block/mmcblk0p15 /data ext3 /dev/block/mmcblk0p16 #/misc mtd misc #/boot mtd boot #/recovery mtd recovery /pds ext3 /dev/block/mmcblk0p3 #/preinstall ext3 /dev/block/mmcblk0p17 /emmc vfat /dev/block/mmcblk0p18 I am trying to find the err in the mongrel cwr. More: log from this: cwr 5025 + oly recovery(sbin) + oly etc( recovery.fstab ). See thread cwr hacking. It backsup but adv restore fails.
Do you mean you can make a backup nandRoid but it wont restore it? ---------- Post added at 09:37 PM ---------- Previous post was at 09:35 PM ---------- Cuz Dragonz made it that far before... Restore fails because /system can't unmount because there is processes using it...
Yes here is my latest mongrel cwr. But the full restore will never untill we get a UL boot loader so use adv restore for testing or find a work around.
[Q] CWM problem formatting /data
I flashed CWM 5.5.0.4 a couple weeks ago because I wanted to flash the latest CM9 KANG. I have been having freezing and reboot issues with all the builds I've flashed from Coffeebeans and Pershoot. I noticed the other day in CWM that when it was formatting /data it would do it really quickly but not give me an error. It took longer to format /cache. I found a recovery.log from 3/28 when I flashed Task's v14 ROM. I went through the log and it looks like it's not formatting /data. Here is some of the log: Starting recovery on Thu Mar 28 23:47:28 2019 framebuffer: fd 4 (1280 x 800) CWM-based Recovery v5.5.0.4 recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /efs ext4 /dev/block/mmcblk0p1 (null) 0 2 /recovery emmc /dev/block/mmcblk0p2 (null) 0 3 /boot emmc /dev/block/mmcblk0p3 (null) 0 4 /system ext4 /dev/block/mmcblk0p4 (null) 0 5 /cache ext4 /dev/block/mmcblk0p5 (null) 0 6 /data ext4 /dev/block/mmcblk0p8 (null) 0 7 /preload ext4 /dev/block/mmcblk0p10 (null) 0 W:Unable to get recovery.fstab info for /datadata during fstab generation! W:Unable to get recovery.fstab info for /emmc during fstab generation! W:Unable to get recovery.fstab info for /sdcard during fstab generation! W:Unable to get recovery.fstab info for /sd-ext during fstab generation! I:Completed outputting fstab. -- Wiping data... Formatting /data... I:Formatting unknown device. rm: can't remove '.' or '..' rm: can't remove '.' or '..' Formatting /cache... Creating filesystem with parameters: Size: 469762048 Block size: 4096 Blocks per group: 32768 Inodes per group: 7168 Inode size: 256 Journal blocks: 1792 Label: Blocks: 114688 Block groups: 4 Reserved block group size: 31 Created filesystem with 11/28672 inodes and 3694/114688 blocks warning: wipe_block_device: Discard failed -- Installing: /sdcard/GalaxyTask_14_Slim.zip Finding update package... I:Update location: /sdcard/GalaxyTask_14_Slim.zip I:using /data/media, no /sdcard found. Opening update package... Installing update... minzip: Extracted file "/tmp/boot.img" ~~~~~~~~~~~~~~ <== Galaxy Task 14 ==>about to run program [/sbin/busybox] with 3 args mount: mounting /dev/block/mmcblk0p8 on /data failed: Device or resource busy After that it finishes installing the ROM without any issues, but I'm worried about why it's not formatting /data. I'm not sure if this has anything to do with it but when I flashed CMW 5.5.0.4 through Odin I accidentally put it in the bootloader section instead of PDA. Does anyone have any ideas on this? Should I just Odin back to stock and start over? Thanks.
[DEV][P] ICS CWM for locked bootloader *Pre-Release*
Can someone test CWM and report.
mount: mounting /dev/block/mmcblk0p10 on /system failed: Device or resource busy run_program: child exited with status 255 ---------- Post added at 01:49 PM ---------- Previous post was at 01:45 PM ---------- Starting recovery on Sun Oct 14 11:46:06 2012 can't open /dev/tty0: No such file or directory framebuffer: fd 3 (540 x 960) CWM-based Recovery v6.0.1.2 recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /cache ext4 /dev/block/mmcblk0p12 (null) 0 2 /data ext4 /dev/block/mmcblk0p11 (null) 0 3 /system ext4 /dev/block/mmcblk0p10 (null) 0 4 /sdcard vfat /dev/block/mmcblk0p14 (null) 0 5 /boot emmc /dev/block/mmcblk0p9 (null) 0 W:Unable to get recovery.fstab info for /datadata during fstab generation! W:Unable to get recovery.fstab info for /emmc during fstab generation! W:Unable to get recovery.fstab info for /sd-ext during fstab generation! I:Completed outputting fstab. Irocessing arguments. I:Checking arguments. I:device_recovery_start() Command: "/sbin/recovery" ro.setupwizard.mode=DISABLED persist.sys.usb.config=mtp,adb drm.service.enabled=true ro.semc.sim.bip.enabled=true ro.secure=0 ro.allow.mock.location=0 ro.debuggable=1 persist.service.adb.enable=1 ro.semc.version.sw=1254-4233 ro.semc.version.sw_revision=6.1.B.0.544 ro.semc.version.sw_variant=GENERIC ro.semc.version.sw_type=user ro.factorytest=0 ro.serialno=CB511ZDGA2 ro.bootmode=unknown ro.baseband=unknown ro.carrier=unknown ro.bootloader=s1 ro.hardware=st-ericsson ro.revision=0 ro.crypto.state=unsupported persist.chargemon.active=1 persist.sys.profiler_ms=0 persist.sys.language=de persist.sys.country=AT persist.sys.localevar= persist.sys.timezone=Europe/Vienna persist.sys.boot.sound.volume=0 init.svc.tad=stopped I:Checking for extendedcommand... I:Skipping execution of extendedcommand, file not found... W:failed to mount /dev/block/mmcblk0p10 (Device or resource busy) Error mounting /system! W:failed to mount /dev/block/mmcblk0p10 (Device or resource busy) Error mounting /system! I:Trying /dev/block/mmcblk0p14 on LUN file /sys/devices/platform/musb-ux500.0/musb-hdrc/gadget/lun0/file I:Successfully shared /dev/block/mmcblk0p14 on LUN file /sys/devices/platform/musb-ux500.0/musb-hdrc/gadget/lun0/file Starting recovery on Sun Oct 14 11:46:36 2012 can't open /dev/tty0: No such file or directory framebuffer: fd 3 (540 x 960) CWM-based Recovery v6.0.1.2 recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /cache ext4 /dev/block/mmcblk0p12 (null) 0 2 /data ext4 /dev/block/mmcblk0p11 (null) 0 3 /system ext4 /dev/block/mmcblk0p10 (null) 0 4 /sdcard vfat /dev/block/mmcblk0p14 (null) 0 5 /boot emmc /dev/block/mmcblk0p9 (null) 0 W:Unable to get recovery.fstab info for /datadata during fstab generation! W:Unable to get recovery.fstab info for /emmc during fstab generation! W:Unable to get recovery.fstab info for /sd-ext during fstab generation! I:Completed outputting fstab. Irocessing arguments. I:Checking arguments. I:device_recovery_start() Command: "/sbin/recovery" ro.setupwizard.mode=DISABLED persist.sys.usb.config=mtp,adb drm.service.enabled=true ro.semc.sim.bip.enabled=true ro.secure=0 ro.allow.mock.location=0 ro.debuggable=1 persist.service.adb.enable=1 ro.semc.version.sw=1254-4233 ro.semc.version.sw_revision=6.1.B.0.544 ro.semc.version.sw_variant=GENERIC ro.semc.version.sw_type=user ro.factorytest=0 ro.serialno=CB511ZDGA2 ro.bootmode=unknown ro.baseband=unknown ro.carrier=unknown ro.bootloader=s1 ro.hardware=st-ericsson ro.revision=0 ro.crypto.state=unsupported persist.chargemon.active=1 persist.sys.profiler_ms=0 persist.sys.language=de persist.sys.country=AT persist.sys.localevar= persist.sys.timezone=Europe/Vienna persist.sys.boot.sound.volume=0 init.svc.tad=stopped I:Checking for extendedcommand... I:Skipping execution of extendedcommand, file not found... W:failed to mount /dev/block/mmcblk0p10 (Device or resource busy) Error mounting /system! SD Card space free: 9301MB Backing up boot image... Backing up system... W:failed to mount /dev/block/mmcblk0p10 (Device or resource busy) Can't mount /system! I:Can't format unknown volume: /external_sd I:Can't format unknown volume: /emmc I:Can't format unknown volume: /external_sd I:Can't format unknown volume: /emmc
XperianPro said: I need partition blocks with you can see by executing mount in terminal. Could you guys upload pics of output. Sent from my ST25i using xda app-developers app Click to expand... Click to collapse Hi XperianPro, first of all congratulations on making working CWM for Xperia U ICS :good: Fantastic job! I can hardly wait to see one for Xperia P. If any one can do it, I'm sure you can :good: Here is output of mount in terminal: Code: [email protected]:/ $ export PATH=/data/local/bin:$PATH [email protected]:/ $ su [email protected]:/ # mount rootfs / rootfs ro,relatime 0 0 tmpfs /dev tmpfs rw,nosuid,relatime,mode=755 0 0 devpts /dev/pts devpts rw,relatime,mode=600 0 0 proc /proc proc rw,relatime 0 0 sysfs /sys sysfs rw,relatime 0 0 none /acct cgroup rw,relatime,cpuacct 0 0 tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0 tmpfs /mnt/obb tmpfs rw,relatime,mode=755,gid=1000 0 0 none /dev/cpuctl cgroup rw,relatime,cpu 0 0 tmpfs /dev/shm tmpfs rw,relatime,mode=755,gid=1000 0 0 /dev/block/mmcblk0p10 /system ext4 ro,relatime,user_xattr,acl,barrier=1,data=ordered 0 0 /dev/block/mmcblk0p11 /data ext4 rw,nosuid,nodev,noatime,user_xattr,acl,barrier=1,data=ordered,noauto_da_alloc 0 0 /dev/block/mmcblk0p12 /cache ext4 rw,nosuid,nodev,noatime,user_xattr,acl,barrier=1,data=ordered 0 0 /dev/block/mmcblk0p6 /modemfs ext4 rw,nosuid,nodev,noatime,user_xattr,acl,barrier=1,data=ordered 0 0 /dev/block/mmcblk0p8 /data/idd ext4 rw,nosuid,nodev,noatime,user_xattr,acl,barrier=0,data=ordered 0 0 /dev/block/vold/179:14 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0 /dev/block/vold/179:14 /mnt/secure/asec vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0 tmpfs /mnt/sdcard/.android_secure tmpfs ro,relatime,size=0k,mode=000 0 0 /dev/block/dm-0 /mnt/asec/com.wyse.pocketcloudfull-1 vfat ro,dirsync,nosuid,nodev,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0 [email protected]:/ # Output is also in attach and is from ICS of course If you need anything else please don't hesitate to ask. I'll test what ever you want Thank you very much in advance! Best regards!
I will post test build in next few hours,thanks for reports. Sent from my ST25i using xda app-developers app
Alpha uploaded.
XperianPro said: Alpha uploaded. Click to expand... Click to collapse Will test it right away...
seky0405 said: Will test it right away... Click to expand... Click to collapse Super. Sent from my ST25i using xda app-developers app
Installation went fine but can not boot in recovery, any suggestion? I even try with x-parts and when phone reboot I continuously press volume down button and phone vibrate once and continue with normal booting... How can I help to debug this?
seky0405 said: Installation went fine but can not boot in recovery, any suggestion? I even try with x-parts and when phone reboot I continuously press volume down button and phone vibrate once and continue with normal booting... How can I help to debug this? Click to expand... Click to collapse Can you point me to recovery that boots but for locked bootloader. Sent from my ST25i using xda app-developers app
XperianPro said: Can you point me to recovery that boots but for locked bootloader. Sent from my ST25i using xda app-developers app Click to expand... Click to collapse Sure Here it is in attach... Looking forward to test another version
seky0405 said: Sure Here it is in attach... Looking forward to test another version Click to expand... Click to collapse Next version will in next one or two hour or tommorow. Sent from my ST25i using xda app-developers app
XperianPro said: Next version will in next one or two hour or tommorow. Sent from my ST25i using xda app-developers app Click to expand... Click to collapse OK Looking forward to test it Thank you very much for your hard work :good:
the Phone vibrate,but doest boot in the Recovery but i think ,you will manage that
Epic thread, I've been waiting to this since I had the phone. I installed the alpha version, it won't work yet, but good luck, I'll be here to test anything.
test hello and good job for your work i test it and nothing else happened non of the tap on screen or push the lower button rapidly. i appreciate for your work and i can test all of the scripts you will make to help you to finish this wonderfull project keep up and stay tuned
Hi XperianPro, can we expect another version tonight? Thank you very much in advance!
Great! I will wait for someone that certify that it works 100% on Xperia P :fingers-crossed:
Hi XperianPro Thank you for your work and look forward to the next one : Good:
XperianPro said: Sorry for waiting but something went wrong during win 8 installation. I hope you understand,eta will be in next few days. Click to expand... Click to collapse take your time xperianpro we can wait for 10 days and glad to see you again with new windows 8 skins
Any novelty? Enviado desde mi Xperia P usando Tapatalk 2
[Q] Can't update CWM : (bad) Installation aborted.
Hi all, I want to flash CM10.2 for Android 4.3 but, I can't flash any ROM. when i want to Update CWM, it's impossible. see the log : Code: Starting recovery on Tue Sep 2 12:35:39 2014 framebuffer: fd 4 (480 x 800) E:unknown volume for path [/system] recovery filesystem table ========================= 0 /tmp ramdisk (null) (null) 0 1 /boot emmc /dev/block/mmcblk0p5 (null) 0 2 /recovery emmc /dev/block/mmcblk0p6 (null) 0 3 /efs ext4 /dev/block/mmcblk0p1 (null) 0 4 /cache ext4 /dev/block/mmcblk0p7 (null) 0 5 /system ext4 /dev/block/mmcblk0p9 (null) 0 6 /data ext4 /dev/block/mmcblk0p10 (null) 0 7 /preload ext4 /dev/block/mmcblk0p12 (null) 0 8 /emmc vfat /dev/block/mmcblk0p11 (null) 0 9 /sdcard vfat /dev/block/mmcblk1p1 (null) 0 W:Unable to get recovery.fstab info for /datadata during fstab generation! W:Unable to get recovery.fstab info for /sd-ext during fstab generation! I:Completed outputting fstab. I:Processing arguments. I:Checking arguments. I:device_recovery_start() PhilZ Touch 3 CWM Base version: 6.0.1.8 Command: "recovery" ro.boot.serialno=0009aa09441a2f ro.sec_debug.enable=0 ro.serialno=0009aa09441a2f ro.bootmode=unknown ro.baseband=unknown ro.bootloader=unknown ro.debug_level=unknown ro.emmc_checksum=unknown ril.dualmode.change=unknown ro.hardware=smdk4210 ro.revision=14 ro.factorytest=0 ro.uart_debug=0 ro.secure=1 ro.allow.mock.location=0 ro.debuggable=1 persist.sys.usb.config=mtp init.svc.ueventd=running init.svc.recovery=running adb.recovery=1 init.svc.adbd=running service.adb.root=1 I:Checking for extendedcommand... I:Skipping execution of extendedcommand, file not found... -- Installing: /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip Finding update package... I:Update location: /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip Opening update package... E:Can't open /emmc/recovery-clockwork-6.0.4.6-i9100(1).zip (bad) Installation aborted. Have you an idea ? Sorry for my poor english
Check the md5 of the downloaded zip. Looks like a corrupted one. Also make sure you copy / paste the zip on your phone correctly. Sent from my Nexus 5 using Tapatalk 2
corrupted file From my own experience it normally is a bad/corrupted file that you downloaded. I've waste hours downloading a file through my phone only to fbd out that I couldn't flash it. Check your downloaded program cause this can affect the result of your download files. I use Internet download manager for windows which is a very useful download manger for all your needs. For the android I used ADM or advance download manager but I suggest using idm on PC insyead . One rule I always do now is check the archive if they work or unzip in your PC if not then it won't work on your phone when flashing
I think my Honor 8 frd l02 emmc is damaged
This is my first time rooting and flashing custom rom. I think my phone's emmc is damaged because TWRP can't wipe or format data it says Unable to mount /data/media/TWRP/ .twrp Failed to mount '/3rdmodem' (Invalid argument) and so on When I use this command cat /etc/fstab I get only this /3rdmodem ext4 rw 0 0 /cache ext4 rw 0 0 /data f2fs rw 0 0 and so on but I must be getting something like this /dev/block/mmcblk0p13 /system ext4 rw 0 0 /dev/block/mmcblk0p14 /cache f2fs rw 0 0 /dev/block/mmcblk0p15 /data f2fs rw 0 0 this is missing /dev/block/mmcblkXXXX and when I try this command ls /dev/block/bootdevice/by-name/ or mount -t ext4 /dev/block/bootdevice/by-name/userdata /data I get No such file or directory Can someone please help me if my phone's emmc is damaged or not. If my phone's emmc is damaged than I will be wasting my time fixing my phone. Thank you Regards