x10mini:-
i flashed this
http://i.imgur.com/DlFR8y1.png
then my phone is dead.. not entering flash mode... no led ... nothing happening ... completely dead...
any suggestions...?? plzzzzzzzzzzzzzzzzzzzzz help
plzzzzzzzzzzzzz help.................
some1 plzzzzzzzzzzzzz help.................
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.....
kalaishere said:
some1 plzzzzzzzzzzzzz help.................
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz.....
Click to expand...
Click to collapse
Have it JTAGGED in a repair-shop and don't flash that ever again...
SmG67 said:
Have it JTAGGED in a repair-shop and don't flash that ever again...
Click to expand...
Click to collapse
JTAGGED ?? wats tat??
cant we do it by ourself ???
thanks..
kalaishere said:
JTAGGED ?? wats tat??
cant we do it by ourself ???
thanks..
Click to expand...
Click to collapse
A JTAG-box is a special machine that uses connection-points inside your phone in order to restore it to it's factory state, They're quite expensive, but most repair-shops will have one.
And no, unless you have a JTAG-machine, you can't fix it by yourself.
Remove this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
under it you will find white battery connector . Pop it out with little stick or something and let the phone stay 10 minutes without the battery. Connect again the battery and hold home and power if its vibrate while holding the power and home its OK! Then without releasing the HOME and POWER press the BACK button and HOLD it then release the HOME and POWER . NOW you are in flash mode . DONT release the back button and connect your phone to the PC. NOW!! IF PC recognize phone fix it via SEUS. If there is no reaction in PC ..... then JTAG my friend.
JTAG box are not cheap things . They are used for programing flash chips . Phone is opened and inside his have pinouts for programing . There connectors from JTAG goes to phone flash memory and JTAG flash the bootloader and etc. In service this cost from 30$ to 100$ depends from phone and model. One riffbox (if you can make it by yourself cost 350$ and 20$ for multi JTAG serial port)
Related
I was using RR 3.0.6 JB and something made my status bar dissapear. So, I started flash the factory rom (O2 UK I9100P ICS) and now my odin still like this since 20 minutes ago. It's normal? Or something more wrong happened? lool :/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Try to change the cable if odin stucks.
Peace
Hit Thanks & It will Disappear
Sent from S II Running Official ICS 4.0.4 with Siyah 4.1 [/size]
leeomendes said:
I was using RR 3.0.6 JB and something made my status bar dissapear. So, I started flash the factory rom (O2 UK I9100P ICS) and now my odin still like this since 20 minutes ago. It's normal? Or something more wrong happened? lool :/
Click to expand...
Click to collapse
Never a good Idea to use the pit file unless there is something drastically wrong with the phone....
Have you had any luck fixing this.. if not post the current state of your phone..
Unplug the cable and see what happened (soft brick, hard brick)... you shouldn't have used the .pit file for such a problem...
[size=-2]Sent from my Galaxy S2[/size]
s_vohra said:
Never a good Idea to use the pit file unless there is something drastically wrong with the phone....
Have you had any luck fixing this.. if not post the current state of your phone..
Click to expand...
Click to collapse
yeah, going to buy my JIG cable... I think it's hard bricked now :/
gb.yolo said:
Unplug the cable and see what happened (soft brick, hard brick)... you shouldn't have used the .pit file for such a problem...
[size=-2]Sent from my Galaxy S2[/size]
Click to expand...
Click to collapse
But what happened is that the phone don't found the internal storage... anyway, my phone is bricked now. thanks for help me
Yeah. I left my phone in a repair centre and will be £50 to fix... My bootloader "dead" or something like this!
Hello, it's 6 month since i using my s6 edge never had any problem , like 1hour ago i took phone wanted to call and went off when and now not booting when i press power button to boot it shows me boot logo and down is light screen but screen is like blinking not able to show in picture can anybody tell me what happend to the phone ?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i reflesh it with same ROM that it had official one , but still same can anybody help meeee?
Don't know what's wrong but I can suggest u to install a custom ROM.
tra_dax
I can't access recovery mode ...
Nikusha04 said:
I can't access recovery mode ...
Click to expand...
Click to collapse
If u have any official cm rom for ur device then flash it via Odin.
And if it doesn't work, try out loading the CSC and BL file with the PDA file. This might work.
tra_dax
mine did the exact same thing with that goofy lower half of the screen. It went away after a reboot and I stopped using the phone. Going to upgrade to 5.1.1 on the chance it's a software problem if it happens again.
I took it in guarantee service they said motherboard is dead need replace
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
VooDooKill said:
The same here ...
This confirmed that the main board is damaged ??
I flashing an official rom and done correctly, but the restart stay in bootloop ...
Click to expand...
Click to collapse
Did you try to get Download Mode again?
CrashTestDroid said:
Did you try to get Download Mode again?
Click to expand...
Click to collapse
Yes... I enter to download mode again, I flash official stock rom in three times correctly but always restarts with the bootloop ...
I bricked my Blu life one x and I want to repair it can someone help me out ow to do it and where I can't find the Blu life one x rom?
Download this:
https://www.androidfilehost.com/?fid=24391638059058964
From user @Bad_MOFO_33
Then download the SPFlash tool from here:
http://spflashtool.com/
Then be sure to have usb drivers installed so the COM identifies your phone.
Open the ROM you downladed and extract the carpet into desktop or somewhere you can easily find it.
Open SPFlashtool and go to the DOWNLOAD window and select Scatter-loading and select the scatter file from the folder where the ROM is like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then with the phone turned off (surely is off since its bricked) click the DOWNLOAD button on the spflashtool
And then AFTER you clicked DOWNLOAD on SPFLASHTOOL connect the phone while holding the VOLUME UP and is should identify it and begin the process.
DONT disconect until its done and a BIG GREEN CHECK mark appears, then just unplug and power it on.
ANd thats it
-------------------------------------------
Sorry i dont know why the image is not loading but hopefully the instructions will guide you
Thanks I'm going to try it tomorrow.
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
azazsxsxdcdcfvfv said:
Thanks bro... It has worked.... But now I have a different problem... The sim doesn't get recognized.
Click to expand...
Click to collapse
Might need to repair your IMEI
Follow this guide:
http://sheershbansl.blogspot.mx/2014/08/how-to-fix-invalid-imei-3-methods.html
NOTES:
1.- you IMEI numbers are on the battery sticker theres 2 of em one for sim 1 and the other for sim2
2.-when entering the imei where it say to type AT+ etc etc on our BLU you need to type AT (SPACE) + and the rest, so it looks like AT + and then all the rest (EGMR=1,7,"1234567890")
3.- remember to SET Command and then reset so the IMEI settles in.
Hope thats the problem solver
Thanks for all guys that helped me... The sim problem was my fault cause I messed around with the bands. Like north America and world bands...
Hey everyone, i have a problem with my phone which is Samsung Galaxy Alpha G850. It is stuck in bootloop when on battery. In the begining it worked on charger all the time but as the time went by the problem was worse and it was stuck on bootloop on charger also. I tried new battery but it didnt work, also i tried flashing new ROM and nothing has changed. Does anyone have an idea how to fix this?
p.s. I dont have warranty papers buying a new phone is better for me than sending it to Samsung
i have the exact problem as you,any solutions ?
arbi01 said:
i have the exact problem as you,any solutions ?
Click to expand...
Click to collapse
No, i tried everything but nothing worked, i guess it's some hardware problem
Alpha stucked in bootloop
Hi all Alpha people,
Got also in stucked bootloop SM-G850F.
I took out battery, press power button a few seconds,
Reinsert accu and quickly press vol. down+home and power.
After a few attempts the device turned to download mode
and was ready to install stock rom, found by sammobile.
Perhaps trying recovery if you have one. Greets Nick
Solved
I had the same trouble, buyed a new battery and the problem continues. The solution is to use a small piece of paper to adjust the battery. Please check the images attached of the solution. Hope will help to other people with the same trouble.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
razametal said:
I had the same trouble, buyed a new battery and the problem continues. The solution is to use a small piece of paper to adjust the battery. Please check the images attached of the solution. Hope will help to other people with the same trouble.
Click to expand...
Click to collapse
cant see the images please
Yesterday I received an alert on my phone that I could update to Android 11 (stock). And so I agreed, and after the update, the phone turned off, turned on and entered into Fastboot mode. It wouldnt boot. So I decided to flash the Android 10 (stock) back on it. Boom. After installing it, the phone turned off and I cant turn it on. It looks dead, even if I hold POWER button for many seconds - nothing. Holding POWER+VOLUME DOWN = NOTHING... volume up = nothing...
So I installed MIFLASH and connected my smartphone to PC and luckly it recognizes my smarphone COM port. Then I tried to flash the stock ROM and every single time I click flash, it shows this message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know I should not downgrade from Android 11 to 10 and I cant believe how stupid I am. But now I am stuck with a bricked phone, no money left to buy a new one (actually I still have 4 payments due in the next 4 months to finish paying for this smartphone).
Can you guys please help me?
Yes, that is easy to bypass error not recive hello packet. Just hold power button 10-15sec afther that refresh MiTool and flash it again but for me afther that i got error Your Acccount is not Authorized for that operation.
I am pretty sad I just saw your message now I ended up paying a guy to fix my smartphone $ 80. **** xiaomi, piece of ****.
batata004 said:
I am pretty sad I just saw your message now I ended up paying a guy to fix my smartphone $ 80. **** xiaomi, piece of ****.
Click to expand...
Click to collapse
+1.
I'm on the same situation, but I'm getting a ***** up error `Input string was not in the correct format`. Did you came across it by a chance?