Related
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
anyone?
Firefly137 said:
hi guys.
i tried to update my LG Optimus one (p500) with pc suite iv and the lg tool but both say im up to date. im on firmware 10a...
now i want to go to 2.2.2 and it seems i cant via that method. i read the other methods by manully upgrading and down grading firmware. im on MTN network here and i heard that in order to update my firmware, my network needs to allow it. ok so in africa everything moves at a very slow speed... riding a elephant to work is very slow pace .
so what i want to know is if i do this manual firmware update will it cause me problems? and is the roms and kernels region based... in other words will it effect my simcard and network ect.?
im rooted with Z4root and i got thunberg recovery + back up.
on the backup... i cant do back up of the sd-ext ... i presume its because i have not done a partition of my sdcard... is this correct... all others are backed up.
i also cant seem to get onto my sdcard via this recovery. it picks up my device but not my sd card. so if something goes wrong i can get onto my sdcard via recovery... SCREWED
i got windows xp service pack 3 and mac probook. i have the lg mobile drivers installed on the xp system.
i hope that im clear on what i need. id really be great full if someone could help me..
Click to expand...
Click to collapse
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
sweetbinodray said:
Dear i am really sorry to say that most of the things i am not able to understand. What i understood is
1) you want to change Rom (upgrade or downgrade).
2) Your SD card is not detecting in recovery.
What are the queries you have
3) GSM will work or not as you have heard it should be country specific.
Ok now here are the answer.
1) For downgrading the ROM, you can downgrade and upgrade any official ROM via KDZ updater. Here is the link. http://forum.xda-developers.com/showthread.php?t=883314
2) It may be something went wrong. Just restart your phone and have factory reset it may be solve your problem.
3) Yes you have heard it right. But that is only for 2.3.3. In case of 2.2 we have globe release so you can downgrade it without having any GSM issue.
From next time be precise so that people can understand what is the exact problem you are facing. If you have any query you can ask. Members will defiantly help you out.
Click to expand...
Click to collapse
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Firefly137 said:
thank you for your reply.
sorry for not being clear.
let me try again:
ok so this is my phone at the moment...
p500 stock firmware 10a
rooted with Z4root
my recovery: recovery-RA-thunderg-2.2.1-GNM
i have not partitioned my SDcard
using super manager and file expert as my explorer
have titanium backup and backed everything up.
what did i do so far:
i deleted all the useless app that come stock.
what do i want to do:
1: i want to try different roms and kernels
2: i want to make sure that my nandbackup is done correctly
3: i want to know if all the roms and kernels will work in my region (south africa) even though my service provider (MTN) has not allowed any updates. so can i install a 2.2.2 version rom and will still be able to use is in my country
my Q? :
1: do i need to update my firmware to 2.2.2 if the kernel or rom is based on that firmware 2.2.2( or what ever version). or does the roms come with that firmware and if i install that rom wil my firmware be at what ever version the rom is?
2: i backed up everything i could. but when i tried to backup my sd-ext it says "something went wrong, check log". so is this because i did not partition my SDcard yet?
on the SDcard not picking up... ONLY!!! when I'm in my recovery (recovery-RA-thunderg-2.2.1-GNM), when i select usb mode in my recovery then it enables it but my pc does not pick it up as mass storage, so i cant copy over any files while in recovery mode. what must i do?
3:can i install any roms even if MTN has not enabled firmware 2.2.2
sorry for the long post
hope im more clear now
Click to expand...
Click to collapse
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
sajjan said:
1.no you dont have to upgrade or downgrade...just flash the rom of your choice..
2.flash a new recovery and try...
3.you can use any rom anywhere .....what has mtn got to do with the phones firmware...is yours a cdma phone??
hit the thanks button if i helped you
Click to expand...
Click to collapse
1. thank you
2. must i go clockworks?
3. MTN is gsm i think... i was just wondering is it is going to be a issue since MTN need to allow update if i wanted to update my phone through pc suite or lg tool.
sweetbinodray said:
Good dear this time you are almost on trac.
1)first of all you can flash Mik 2.3.4 rom with Franco kernel v18 find it on rom dev section.
2) it doesn't matter most. You can have contact backup on gmail server and backup your sms from any sms backup apps.
3) mike and andy from will work.try those.
1) every rom comes with kernel (firmware). You can simply flash rom and you done. Like if you are flashing Mik rom just flash zip file from recovery and you are ready to roll
2. You can ship this part.
3. this is bit controversial. official rom will work but may be without GSM. But you can flash mike and andy rom. It will work 100%..
Sent from my LG-P500 using XDA Premium App
Click to expand...
Click to collapse
1) ill try that rom
2) everyone seems to say back up 1st.. so i did but as i say i cant back up sd-ext... so is this just if i have partitioned?
and how can i fix the fact that i cant get onto my SDcard when in recovery... must i use clock works instead?
are you saying i must not back up?
hehehe
Look, your operator has better things to do than implement FW version checking. GSM is a standard stuff, either the phone talks to BTS or does not.
try clockwork....your 3rd question is answered above
Chapter 1: The Foolishness of the User
Hi, I have the korean version of the optimus one(KU3700). It was on gingerbread(2.3.4) stock. I was trying to root it by downgrading it. I entered "adb reboot recovery" and I'm stuck. I tried to reflash it by going to emergency mode with the button combinations using the KDZ updater with this
"csmg. lgmobile. com:9002/swdata/WEBSW/LGKU3700/AKTFBK/KU370040_00/KU370040_00.kdz"
and it worked without any errors but when it when it came up it was still on recovery mode. Is there any way I can change the phone mode to the regular mode
Chapter 2: Journey to Salvation
For anyone who has this korean optimus one, after days of searching, I've found a web site that gave me hints to solve the problem. I just needed a different kdz file and I got it here:
h t t p://sirospace.tistory.com/category/Android%E2%97%86
popped it in google translate because I'm Filipino and can't read korean.
Downloaded the froyo kdz and flashed. I hope this can help other people stupid enough to play with their phones by typing random commands without knowing what it does, like me, LOL...so happy, now it's time to root
Chapter 3: False Hope
OK so I have successfully unbricked and rooted my KU3700, now The problem I have is installing a custom recovery on this phone, none of the images I try work.
Recovery images I have tried are as follows:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
Every time it finishes and reboots, it gets stuck at the LG logo.
Chapter 4: Wisdom Within
Found the problem. The images above are for the P500.Even if the KU3700 hardware is similar to the P500, flashing firmwares made for the other model will result in errors. The same holds true for custom recoveries.
Chapter 5: The Plea to the Gods
I've contacted drellisdee and submitted the files needed for custom recovery creation for the KU3700.
Just waiting for the flash image now. Thank you everyone
Chapter 6: The Forgotten
It seems drellisdee is busy right now. I'm a windows user and knows nothing about programing. So if anybody can help I'm sure the KU3700 community would be greatful. I've attached the files I think are needed to make a custom recovery.
Chapter 7: Quest for the Custom Recovery
I got tired of waiting. So as a windows user with no experience in programming, I did a lot of copying and pasting, I managed to port clockwork mod using virtualbox following this website:
h t t p://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
So I have got a bootable and flashable custom recovery but nothing works yet. I still need to configure it according to the device.
I have uploaded the image and the build files. Please help me configure it and tell me what's wrong. I really don't know that I'm doing
PS: you can try flashing the custom recovery by doing "fastboot flash recovery /Path to/recovery.img and you can go to recovery by using android terminal and type "boot recovery". It will boot, but that's that LOL. Take out the battery to boot to normal mode.
Chapter 8: The Holy Grail
LOL, I found the answer again. I was so frustrated that I kept squishing the phone in recovery and found out that it was just a button configuration problem. A bit of research and I found out that I can toggle it by pressing volume up and volume down at the same time. WOOHOO!!! Custom Recovery at last
Chapter 9: Invasion of the ROMS
And here at last, the user is retired. But the adventure is far from over. It is foretold that the creation of the Custom Recovery will begin a new era. The key to open the gate has been found. So our hero will await the invasion of the ROMS<background music...> END
you can see at
tinhte.vn/threads/908874
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
vidgen13 said:
Thank you for the reply but as I said, I can flash fine without errors it's getting back to regular mode I have a problem with. Rebooting and reflashing does not take me out of the recovery screen(it's just a opened box with an orange arrow and the android logo).
Click to expand...
Click to collapse
yes i see.but i'm newer android.i only send you link to fix
i hope have a pro android to fix your brick
This is just a shot in the dark because i didn't understand what you did entirely : have you used the combination to actually recover the stock rom after you flashed with KDZ ? (Home+VolDown+Power)
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
vidgen13 said:
Yes already did. The computer can see the phone whenever I connect it except that I can't access adb. I may have to take this back to the store
Click to expand...
Click to collapse
Are you sure you flashed the right rom for your phone? There's an application that downloads the required rom for your phone according to your IMEI/SN, but i don't know if it works with the korean version.
Yes it's the KDZ file, unfortunately it's the only KDZ file out there for ku3700. Shouldn't have settled for this korean version
why you wanna downgrade the latest version?
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
asmOne said:
Dude I have the same Korean edition as you.
Actually why you wanna downgrade the latest version.?
My phone had 2.2.2 and I did upgrade it into 2.3.4 I did it officially and I can tell you How to re-install 2.3.4 if you want.
Click to expand...
Click to collapse
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
I dont get it ,p504,p505,p506 are versions of p500??? And why some of our roms work on those phones?? So by logic this stock work on p500???
Sent from my LG-P500 using XDA Premium App
vidgen13 said:
Thanks for the reply. I wanted to downgrade it to root it. And now I'm rooted. My only problem now is installing a custom recovery. I've already tried several custom recoveries:
recovery-RA-GNM-thunderg-1.1.0.img
recovery-RA-GNM-thunderg-2.2.1.img
recovery-RA-GNM-thunderg-3.0.6.img
but I get stuck at the LG logo when it reboots. I think it's because it's for the p500. So if you have a custom recovery for the ku3700 please help
Click to expand...
Click to collapse
this method worked for my working KU3700 when I'm using my 1st KU3700 I also was struck as you and finely I realized there are No custom roms for Optimus one Korean edition (KU3700/SU370) and I had to connect my phone to an Octopus box (lg softwere box) via software box installed the official firmware. if this method not working you have to connect to a software box.
connect to the internet your PC and 1st install Driver and 2nd install the LG update tool. after installation connect your phone to computer and wait a five seconds for comport installation. after install your phone Run LG Update application.
it is connect to the server automatically indicating red line and after search for latest firmware.
if you can Update your phone it is shows Update butten.
Driver
http://www.4shared.com/file/C3BSNx9P/lgunitedmobiledriver_s4981man3.html
LG Update Tool
http://www.softpedia.com/get/Mobile-Phone-Tools/Others/LGMobile-Support-Tool.shtml
Thank you all for the quick answers, but I already have a rooted ku3700. All I need now is a working custom recovery. If someone has the same phone, please tell me which image is compatible
you can appear the emergency mood with android logo.
it means you have an Empty phone. your Os was been erased. You have to connect your phone to Octopus software box and box server has you original Os for your IMEI. this is the only solution. if you will able to solve this problem without a Software box please inform me. we can open a New Thread for Korean edition.
(ku3700/su370)
I already got out of the emergency mode without an octobus box. It's really simple, you just need to use a different kdz file. The hard part was looking for the kdz file. I have 3 kdz files. KU370017(froyo), KU370033(gingerbread-rootable), KU370040(latest one from LG, gingerbread-unable to root). Just flash with the KDZ updater. I'm on the second firmware because I can't root the latest firmware. To root it, I used super one click(latest version, use zerg rush option). Now I'm just waiting for a custom recovery from drellisdee so I can use custom roms. When I get it, I'll ask him if I can post it so we all can have uber phones LOL
Updated the thread. Can somebody help?
vidgen13 said:
Updated the thread. Can somebody help?
Click to expand...
Click to collapse
If you have flashed a working clockworkmod you can enter into clockworkmod via ROMManager (search in google play aka market). In ROMManager you have "reboot to recovery" option in case you want to go to recovery to flash something. Also you can try to flash from ROMManager a custom recovery (5.0.2.0 for oldBB or 5.0.2.7 for newBB), try to choose to phone model LGP500 oldBB, try and test if it's working. Wish you luck.
Thanks but I already have a working recovery. I just need some ROM makers now
vidgen13 said:
Thanks but I already have a working recovery. I just need some ROM makers now
Click to expand...
Click to collapse
Have you tried CM7.2? if your phone is very similar with Optimus One i doubt it isn't compatible with your phone.
If your phone use 2.6.35.10 or 2.6.35.14 kernel you can give a shot to try CM7.2 on your phone, but before try this make a backup first.
Check this thread Post Your CyanogenMod 7.2.0-RC1 Nightly Questions HERE!! for CM7 custom rom.
yep, it doesn't work. Is there a tutorial for building cyanogen for unsupported devices? All I can find are tutorials for supported devices. I've already got the source code from LG. The problem is just incorporating it in the cyanogen mod. I wish this phone had more users LOL
After scrounging, searching, hunting, and generally scrubbing every tree/rock/bush for answers, I have decided that it is time to post. As I am new to these forums, I sincerely appreciate any assistance in this matter. I have tried the only two methods that I can find to root my phone. the one by Bin4ry which is found at http://forum.xda-developers.com/showthread.php?t=1886460. and another one from a different site that was for JB. I have made sure that both debugging is on as well as allowing installations of non-market applications. I have tried every single usb mode, that just on the off chance, mine was that one phone that wanted to seperate itself from society. Since my phone is running ICS 4.0.4 I should be using Bin4ry's version, but I get stopped by this
Code:
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (18.06.2013) v31 =
======================================================================
Device type:
1) New Standard-Root (thx Ariel Berkman)
2) New Xperia Root by Goroh_kun (Xperia Z, Xperia V [JellyBean] ...)
3) Old
4) Old-Special (for example: Sony Tablet S, Medion Lifetab)
G) Google Glass Mode (thx Saurik for the ab file)
x) Unroot
Make a choice: 1
Please connect Device with enabled USB-Debugging to your Computer
Doing a Backup first, please confirm this on your device!
Now unlock your device and confirm the backup operation.
Done!
Press any key to continue . . .
Please select the RESTORE MY DATA option now on your device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot now ...
mount: Operation not permitted
3679 KB/s (380532 bytes in 0.101s)
2668 KB/s (1500495 bytes in 0.549s)
3647 KB/s (1165484 bytes in 0.312s)
remote object '/system/bin/ric' does not exist
.
Going to copy files to it's place
mount: permission denied (are you root?)
Rebooting again, please wait!
Could Not Find C:\Users\USERNAME\Desktop\newroot\ric
Restoring previous Backup! Please select the RESTORE MY DATA option now on your
device!
Now unlock your device and confirm the restore operation.
Please press any Key when restore is done.
Press any key to continue . . .
Going to reboot last time now ...
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
It says that It's done and that all is done, but I think that because the mounting permission was denied that it wasn't able to root the device. If I could get some assistance on this from someone with more experience, I'd appreciate it. Does anyone know how to fix/root this device? I don't know if this will make a difference or not but it says the software is VS840PP2
Bump, anyone know anything?
I wish someone would
cecpuman said:
Bump, anyone know anything?
Click to expand...
Click to collapse
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Rooted mine
D3d10ck said:
I wish someone would resolve this I see people all over the place bragging they have rooted their exceeds "showing proof" and no-one seems to give a crap that some people can't afford the most easily rooted phones and are forced to get the most workable less expensive phones. I have student loans and would have to pay a $400.00 deposit to be able to pay 150 dollars for a semi decent phone and my carrier won't allow me to use the phone I've had for a couple years that I rooted myself. I just want a viable answer to how do you root the exceed I know what I'm doing but I work for a living (making very little at that) and have a child to support so I can't devote a week to figuring it out and am frustrated that nobody seems to give a crap about anything but the new razr or the iphone (trendys).
Click to expand...
Click to collapse
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
Big thanks.Any roms that work on our phone?
---------- Post added at 02:16 AM ---------- Previous post was at 02:01 AM ----------
Can you post instructions on how to flash CM10?
Do i do standard Lucid downgrade to GB procedure?
Thanks in advance.
lviv73 said:
Big thanks.Any roms that work on our phone?
Click to expand...
Click to collapse
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
how to flash clockworkmod
scififan68 said:
Yeah one which is Android 4.1.2, the file is called "cm-10-20130424-UNOFFICIAL-vs840.zip", but you have to rollback to GB 2.3.6(due to locked ics bootloader), install root, CWM and finally install the CM 10 based LG Lucid beta rom. I see you edited your post and yes it is the standard LG Lucid Gingerbread downgrade method. The forum thread title is "[ROM][BETA] CyanogenMod 10 for the LG Lucid" and its on "androidforums.com" all info you need should be in that forum thread. I can tell you that Jellybean works very well on this phone, and I never want to go back to 4.0.4. :good: But of course there are some bugs, as it seems signal strength is lower, but I may have the wrong baseband for this phone.
Click to expand...
Click to collapse
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
You may have to install the baseband for the Exceed. I think in the CyanogenMod beta thread on AndroidForums there is a link but I'm not sure. Use ROM Manager to install CWM Recovery and then Flash CM10.
Vs840pp 4.1.2
D3d10ck said:
Ok i got it rolled back to gb, but it says i need a sim card and no wireless or 3g, i cant download the cwm unless i restore to ics. Im ecstatic that i got this far I rooted it rolled it forward
Installed rom manager and downloaded the restore but i cant run it without some sort of data connection. Thank you all for getting me this far but what do I do?
Click to expand...
Click to collapse
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
scififan68 said:
As long as you're rooted, search on the internet for "cwm installer for lucid" and follow the install instructions on gingerbread, then you want to flash the CWM touch recovery by searching for LGVS840_CWMT.zip and clicking on "CWM Touch Flashable Recovery for LG Lucid 4G - LG Cell Phones ..." Make sure you have the CWMT zip and LG Lucid CM 10.1 zip on your micro sd card. You then use rom manager to boot into recovery and flash the CWMT zip, then do a factory reset and clear caches and finally flash the LG Lucid CM 10.1 available on androidforums.
Click to expand...
Click to collapse
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
ls5280 said:
May I ask which firmware are you suppose to use to do a roll back? Can you just use the Lucid's firmware or does it have to be the Exceed firmware to work for the roll back?
Click to expand...
Click to collapse
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
scififan68 said:
It's the stock gingerbread for the LG Lucid and you look for the method to install with LG's tool and you will need the file "VS840ZV6_06.S6_06.P58014.R5.cab" and look for how to roll back to gingerbread on the lg lucid to find out how to roll it back.
Click to expand...
Click to collapse
Thanks a bunch, I thought it would be okay to do that but just wanted to make sure before doing it.
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
ls5280 said:
Hmm, after restoring successfully, for some reason I cant get the Wi-Fi to work. I tried both versions the V5 and V6 in the dropbox posted on android forum. Can root and everything but unable to access any internet without wifi. Kinda stuck without CWM. Any clues?
Edited: Whoops, Haha, a Factory Reset fixed it.
Edited: Blah after being able to install Rom Manager and installing CWM "Successful" I still get into CWM recovery.
Edited: CWM solved but now I get the "Cant Mount Sd" in CWM. Trided both "fat and "extFAT" and no go. Any Help?
Edited: Finally! Bad SD card! CM 10 up and running! Woot!
Click to expand...
Click to collapse
Glad to see you got CM 10 on this phone, since it runs pretty good, the only issue I had is the way it handles low signal areas, which is why I upgraded to the LG Spectrum plus I wanted Verizon 4G LTE.
scififan68 said:
Yep, I just rooted my VS840PP, seems you need to use the Lg Spectrum root, but since I'm new I can't post links, but you will need the driver file "LG VZW_United_WHQL_v2.11.0.exe" and "LG_Spectrum_ICS.zip" (put these into a search engine)
Install Instructions
Download and unzip
Connect your phone to your PC
Make sure to have the LG USB drivers installed
Make sure to have debugging enabled
Make sure to have USB connectivity set to internet connection
Run the script for your OS (.bat for Windows, .sh for Linux)
Enjoy
I really did think it would make my phone not boot, but surprisingly it worked! EDIT 8-16-13 treat this phone like any other LG Lucid, which means you can go to CM 10 4.1 Jellybean on this phone.
Click to expand...
Click to collapse
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
kibbles-n-bits said:
I have tried this root and all I get is nothing, I am attaching what the root program says if anyone can help
Click to expand...
Click to collapse
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Will I be stuck in activation mode?
scififan68 said:
I think I may have had the same issue and it turned out the root files didn't extract correctly the first time, so I deleted the root files and extracted them again and it worked. Of course I can't exactly remember it now, but its worth a try. EDIT: Wait no, it looks like root installed fine, are you on stock ICS or Gingerbread? As Gingerbread has special root tools that are different from ics, also make sure you have superSU installed and try the root checker from the playstore.
Click to expand...
Click to collapse
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
derekpoole890 said:
New to the community and was hoping this was a good place for a related question. I have an exceed and I rooted without problem yesterday. I believe my SD Maid app deleted some important files or something because I stopped receiving incoming calls and texts. Anyway, I soft bricked my phone a few times and got the "Long time no see" message. I thought I unrooted my phone so I tried doing a hard reset thinking I would possibly fix the problem. That made matters worse. My soft brick became the only thing I could see no matter how many times I pulled the battery out and rebooted I was stuck at that screen. After hours of trying to get my pc to recognize my phone/get my phone in download mode, I finally fixed it and rooted again. Problem is that when I went through the unbrick process and flashed the kdz file to my phone, it was then stuck in activate mode. It wasnt a big deal because I just played dumb with verizon and they fixed it in their system being that when trying to activate it didnt give me the option to activate on my same plan/number. A bit annoying but better than nothing. My question is when I roll back to gingerbread or flash CM10 will I be stuck in activation mode again? Sorry for the long post, just figured I would give the what and why before my question!
Click to expand...
Click to collapse
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation https://www.youtube.com/watch?v=8WGKCdlnt1s
wow how did i miss that one!
scififan68 said:
You mean the activation screen, that you can quite easily bypass, also once it is is active it doesn't need to be activated again. Here is how to bypass activation
Thanks for the link. I apologize for not researching that better. CM 10 here i come!
Click to expand...
Click to collapse
I know this is an old post but I just snuck and rooted the girlfriends LG Lucid VS840ZV9 / 4.0.4 / software update version 6.3.0_B7
tonight using spectrum_root_windows
http://www.mediafire.com/download/on6cnik4h0fo697/spectrum_root_windows.zip
i am currently running cm 11and i wanna go back to stock
for some reason i had no success with the offline flash method although i used it in the first place to unlock my BL and now i can't use it again
i have all the drivers installed and i entered S/W upgrade mode and it says
_isconnectedphonecall (0)
which means phone is "not" connected.
so i need a nandroid backup please if someone can give me.
i found this thread:
http://forum.xda-developers.com/showthread.php?t=2136204
but multiupload links don't work for me.
it can also be a p760 nandroid! please help me. i want to return my phone back to stock rom
Anybody, Please??!
Use LG's service tool. It will unlike OTA not brick yer phone, download the latest official firmware, for me it was 20h a couple of weeks ago, replace the recovery and un-root, keeping apps and settings.
The reason was to update baseband firmware. Then I needed ADB for root & recovery, and couldn't get it to work under Win 8.1 x64. It instantly worked on my netbook with Win7 x64.
(FlashKDZ/Root/Recovery/Hiddenmenu/troubleshooting) (noob2noob guide)
Okay, this is my first thread on XDA, the reason I'm making it is there is a lots of problems with progressing to lollipop. All of this is already mentioned in the forum, but this way it is much easier since it is all at one place. If I'm doing something wrong please warn me with explanation how to resolve the issue. If I'm posting in wrong forum section please move my thread where it is supposed to be.
1. Before doing anything check if your phone is ready to get updated:
1.1 Do you have a stock Kitkat rom or at least a rom that is kitkat based, since there can be a problem with partitioning if custom lollipop rom is installed
1.2 Create a backup. Don't be lazy LG backups will not help you since they can't go from kitkat to lollipop, don't try to do it from recovery because you will lose custom recovery. Copy your files from phone including extracted contacts, and back it up online with google or some other backup providers.
1.3 Check if you have a latest touch firmware, because you might have a problems after installing lollipop and it will be hard for you to check for updates since your touch might become useless.
1.3.1 To check it go to hidden service menu by typing 3845#*802# and go under HW Device Test, then Touch Test then touch firmware version and write everything down. After that go to touch firmware upgrade and after 15 seconds compare the touch firmware version values with those you written down.
1.4 In hidden Menu you can also go to wlan test then ota setting to check if it is disabled on your phone. After that check again if there is OTA updates for your phone, and also check if there is PC suite Update.
1.5 Check your phones version if it is D802, D800 or something else, and check which rom you have installed. You can do this in settings about phone or if you are happy about hidden menu found, go there and into settings then version info. This might not be interesting or fun to do, but it will save you the trouble if something goes wrong, because you will know what to ask.
1.6 Last but not the least, before starting to flash fill up your battery, i've read some posts that say there are problems with wrong capacity shown, and a lots of battery drain problems, and only solution till now is to have a full battery on start.
2. You will need LG FlashTool and of course installed drivers for your G2 on your PC.
All of that you can get in the thread by @quangnhut123 .
2.1 Just a bit of precautions, don't forget to always copy a kdz file in to Flashtool folder and then start a tool. All should look the same as in that thread, except you should always use CSE method because with this method you will install kdz from scratch, removing everything from the phone.
2.2 You should find the kdz file which suits for your phone on site . You can check for kdz by typing in imei in check new firmware section or find the one for yourself by searching the site. v30a is lollipop open while v30d is for branded G2's.
(I've read that this site is not allowed by Xda moderators, so if I can't post it please give me info on where should we download kdz's from).
2.3 I think it's all pure logic now but lets say it one more time. You have downloaded kdz file, and put it inside LG Flashtool folder. You should now start Flashtool and get your phone into Download mode. To do this you need to hold volume up button on turned off device and connect usb cable while holding volume up. Now just cse flash.
2/3 This is troubleshooting step, if you have a problem ask and i hope this great community will help you like they did to me, and ofc I will do my best to help.
3. Now we go to rooting.
Here is the thread by @avicohh which worked for my D802.
Just follow his step by step tut and you will have a rooted phone
3.1 The only issue that might happen here is you are stuck with # and adb waiting for your phone. To resolve this just go into download mode manually.
4. Okay rooting done, now let's go to custom recovery install
It's easy as installing an app from google play by @bender_007
4.1 After installing it open the app and follow the on-screen instructions. If it fails for the first time, try it few more times, it will eventually work. (OFC. I didn't install it with only one try).
4.2 To get into custom recovery hold volume down and power button till first LG sign shows up, then release both buttons and quickly press them again. It will ask you do you want to do factory reset, press yes and yes again, and it will get you to custom recovery if you installed it.
4.2.1 If you factory reset your phone that means you didn't install recovery correctly and you will lose your data, but again that should be no problem since you have that backup from the start.
Now optional steps:
5. Install system app remover to remove bloatware from your phone. You can do it manually but this way you will have those apps backed up.
6. Next suggestion is to install a few mods if you need them. In my case I had to have a Plug and pop, since it is lost from Lollipop and I loved that feature. Here is a thread on how to install that mod by @p_a_r_s_a7
//That's all, if you have any questions feel free to ask, since there is no dumb questions, but also try to read carefully before//
Thanks to:
@quangnhut123
@avicohh
@p_a_r_s_a7
@bender_007
A lot of others whose names i can't remember. If anyone else needs to be mentioned PM me and i will add you in this section.
I will add pictures and stuff if needed
Thanks, good all-in-one thread, + easiest methods. Ill recommend it‚to others
This forum is such a mess that a thread like this is like a fresh breath of air. Every advice given on other threads references something that you should already know how it's done, or you should already have done to your phone in the past and have a certain version of it, or non-working tools that are only around for a few months until an update makes them unusable.
No wonder that most of the first-page topics, including pinned ones, have the word "brick" in the title. This should signal the forum moderators that something is wrong around here.
My phone is stock international sim-free G2, never rooted or otherwise modified and yet no one was able to offer a coherent solution of how to update to Lollipop, until your post.
So, thanks for this thread.
Thank you, that is exactly why i made the thread. Every one of those threads has everything explained, but you need to search theough 150 pages to understand how something is done. That's why i wanted to make a thread with all explanations made in a single post and to make it noob friendly since the worst thing that happens in other threads is answer like use a search you have it somewhere.
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
seyio said:
Hi,
Thanks for the thread. It really helps noobs like me, but I still have a couple of questions...
I was running Paranoid Android L rom with root, twrp and kk bootloader on My D802.
I didn't see this thread before I decided to downgrade back to 4.2.2 stock rom, and now I don't really know what steps to take.(I have kernel version 3..4.0 and build number JDQ39B)
I haven't seen an OTA available, so I was thinking of flashing new Lollipop rom kdz file. But I've been seeing stuff about using LG PC suite to upgrade via OTA so i wasn't sure.
So my main question is that do I do an OTA upgrade on my current 4.2.2 stock rom or do I download an official Lollipop rom? Can you give me a brief idea of the steps to take?
Thanks
Click to expand...
Click to collapse
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
[email protected]$o said:
Updating through pc suite or ota is the best way if it is available to you. Flashing kdz is the same thing but that is doing it manually while through pc auite nad ota is pretty much automatic. Anyways which ever way you decide to use be sure to fully charge your battery and factory reset acter the update. If you need anything else feel free to ask
Click to expand...
Click to collapse
Do I flash KK bootloader or root before I update through ota?
seyio said:
Do I flash KK bootloader or root before I update through ota?
Click to expand...
Click to collapse
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Problems with flashing KDZ
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
sankeerth24 said:
I have downloaded Spain Lolipop KDZ file for LG G2 D802.
Have backed up everything usint TWRP> ( Presently on Optimus G3 rom v 1.4.1 with dorimanx kernel and TWRP )
I have copied the KDZ file to the flash tool. When i use CSE flash .. it takes me to the next page .. in which I click on Start which then opens up the LG Mobile support tool.
Then it shows detecting ur phone .. unpacking or extracting file .. after that shows software updating .. reaches 2 % and then shows error .. asks me to retry .
Do you know what I am doing wrong ? or the cause of this prob ?
http://i58.tinypic.com/15rk2eo.png
Click to expand...
Click to collapse
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
[email protected]$o said:
Had the same problem when flashing kitkat kdz. Are you sure that you have pasted kdzfile inside flashtool. If that is not the problem try other kdz. That helped me
Where are you from and more specifically whhere your phone is from so i can maybe help you with finding right kdz. And btw i think you might have a problem when trying to restore that backup so if you still can backup your phone manually or on the cloud.
Click to expand...
Click to collapse
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
I have seen that some guys who had the same problem resolved it with disconnecting from network
Sent from my LG-D802 using XDA Free mobile app
sankeerth24 said:
I have restored the complete back up using TWRP .... Yes i have already pasted kdz in the same folder of flash tool...still no change .. now downloading D802 20H firmware to flash stock n den again try KDZ
Click to expand...
Click to collapse
http://www.1x1a.com/fixlg-flash-tool-stuck-at-2.html
Or maybe try this. I havent tried it so i cant promise anything but if you want you can try. Hope it helps
[email protected]$o said:
No need to flash bootloader if you didnt flash it for paranoid android. And definitely no need to root since you can root after update.
Click to expand...
Click to collapse
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
seyio said:
Hi again..
OTA update to Lollipop has failed on my D802, LG PC Suite only upgraded me from Android 4.2.2 to 4.4.2, so can anyone help me out here?
Am I missing something for OTA update? If not, then which lollipop kdz can I download for my phone so that I can flash? I live in UK and i use a 3 UK sim if that helps
but also, In the process of trying to boot into my previously installed TWRP recovery, I discovered that i have been restored to stock recovery. I have rooted the phone, but just wanted to clarify: I flash custom recovery, then bootloader/kernel then lollipop kdz?
Thanks again
Click to expand...
Click to collapse
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
[email protected]$o said:
I am not sure but i think that update for the uk didnt come out yet. so you can't update to lollipop yet via pc suite or ota. and you got it all wrong. first you flash lollipop kdz but you will have to try out few of them since official for uk didn't come out yet, after that you root, and then flash custom recovery.
and as previously you will be back to stock recovery after update. you have it all explained step by step in first post. i know it is a bit long but that is the best way, since i didn't want to write stuff like "you should know that" and so on. so just follow the first post and you will be happy, or wait for official uk update over the ota you will be happy too, and i guess it should come out in a month.
Click to expand...
Click to collapse
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
seyio said:
Thanks for the quick reply.
I'll download all the lollipop kdz's and see which one of them works for me till the UK one comes out then I'll just do a normal flash over it.
But seriously, one month for the UK ota :crying: Right now, I don't even know which is worse: Google that takes forever to release updates with so many bugs, or Apple who generally release better stable updates but make older devices laggy...
Thanks again for all the help.
Click to expand...
Click to collapse
its a good update, not that buggy, and be sure to fully charge your battery before the process. you should try europe open or something like that, but there is no german or uk release yet and some guys suspect it is slowed down because they found out bugs in other versions
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
fernievidal said:
After CSE Flashing my d802 with a 30a, it got stock on lg logo screen, then an android screen with "erasing" on bottom, then lg screen. I let it sit for 4 hrs but nothing happened. Im back to stock kitkat atm. A little help please.
Click to expand...
Click to collapse
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
[email protected]$o said:
Where from is your phone? Are you sure you flashed right kdz? Did lollipop even turn off? DidCSE flashing finished sucessfully? I would like to help you, but i cant if you dont explainme what is your problem. I am not some pro who faced every error on every phoneso please explain a bit more
And i suppose that erasing screen could have been factory reset on stock recovery
Click to expand...
Click to collapse
I believe mine is an international version. Where it came from, well, I'm from the Philippines and I got my phone from a local telecom, Globe.
The flash tool said that it was successfully upgraded, but judging from the phone's behavior I think there's something wrong. My phone never started successfully, and I got stuck in the LG logo.