Cm 10.1 galaxy s3 - Android Q&A, Help & Troubleshooting

I rooted my gs3 and want to change my status bar icons. I did it after rooting and it bricked it. I did a factory wipe and am now running cm 10.1 is it safe to try changing them again? Cricket network galaxy s3 cm 10.1 4.2.2
Sent from my SCH-R530C using xda app-developers app

Yeah. First of all make a nandroid backup in recovery before u do anything. Then you can make whatever changes to systemui.apk that you like. I would recommend using uot kitchen to edit status bar icons.
Sent from my HTC Desire using xda app-developers app

Yeah I've done nandroid and a few others for good measure. I'm using ROM toolbox pro to change the settings. I just didn't want to temp brick again and not be able to redo cm 10.1. Thanks for the help though.
Sent from my SCH-R530C using xda app-developers app

Search for the theming threads and do it manually. This way you learn what your doing and safe yourself some issues.
The kitchen has been having issues and is not the best way to do it.
Wayne Tech S-III

Oh yeah I researched kitchen and have just decided to wait before changing any of it.
Sent from my SCH-R530C using xda app-developers app

apokalypzninja said:
Oh yeah I researched kitchen and have just decided to wait before changing any of it.
Sent from my SCH-R530C using xda app-developers app
Click to expand...
Click to collapse
ITs really not that hard to be honest to do it yourself. Takes a little learning but the feeling you get from doing it yourself far out weighs the work.

On my gs3 I have the "signature verification failed" issue. I have to use a PC to toggle my signature verification and I don't have a PC that will run Odin. Is there a way around that? Cause if so I'd love to learn to do it myself.
Sent from my SCH-R530C using xda app-developers app

I think it better to use ninjamorph on play store. Just open framework res in a new project change icons and finish the project.
Sent from my GT-I9100G using xda app-developers app

apokalypzninja said:
On my gs3 I have the "signature verification failed" issue. I have to use a PC to toggle my signature verification and I don't have a PC that will run Odin. Is there a way around that? Cause if so I'd love to learn to do it myself.
Sent from my SCH-R530C using xda app-developers app
Click to expand...
Click to collapse
You can disable the signature verification check in recovery mode. In clockworkmod recovery if you select the "install zip from sd card" then "toggle signature verification" it will disable the signature check that is performed when flashing zip's (Selecting the "toggle signature verification" option again will re-enable signature checking) enabling you to your zip file. If your using TWRP, under settings make sure the "signature verification" option is un-checked.
Sent from my Nexus 10 using xda premium

This is a bit off-topic and a ? Within a ? But where's the developers options in cm 10.1?
Sent from my SCH-R530C using xda app-developers app

apokalypzninja said:
This is a bit off-topic and a ? Within a ? But where's the developers options in cm 10.1?
Sent from my SCH-R530C using xda app-developers app
Click to expand...
Click to collapse
Tap the about phone 7 times

Its in setting as always.
Sent from my GT-I9100G using xda premium

I'm pretty sure I'd see it if it was. So...
Sent from my SCH-R530C using xda app-developers app

apokalypzninja said:
This is a bit off-topic and a ? Within a ? But where's the developers options in cm 10.1?
Sent from my SCH-R530C using xda app-developers app
Click to expand...
Click to collapse
Go to Settings > About Phone, then click on "Build number" seven times.

Thanks chromium. That's the type of answer I needed. I'm glad I decided to use xda cause I'm obviously a noob. But I rooted myself and recovered from a brick on my own so I at least ain't too bad.
Sent from my SCH-R530C using xda app-developers app

Apollo stopped working the other day. I'm running the newest nightly jsyk. Any ideas?
sent from my brain to your eyes using my GS3 Cm 10.1

Related

Turn off menu button on Go Launcher?

So I have go launcher installed an now the menu button always is there , taking up screen space. Anyway to disable this?
Sent from my Galaxy Nexus using xda app-developers app
Check out the dev section for a flashble fix.
Sent from my ADR6410LVW using Tapatalk 2
maqsur said:
Check out the dev section for a flashble fix.
Sent from my ADR6410LVW using Tapatalk 2
Click to expand...
Click to collapse
Not rooted though...is flashing a zip the only way? Its not my phone which is why its not rooted.
Sent from my Galaxy Nexus using xda app-developers app
I would contact the developer of the program and ask him to update the program to ICS standards. This will get rid of that menu and will follow Google guidelines which is what HTC has done with their ICS implementation.
It's time for the developers to catch up to the new standards as ICS is finally starting to gain momentum.

StockMod Rom Idea

Hi, a while back before I installed CyanogenMod on my device I was running a stock 2.2 rom on my rooted g5.
For the fun I decided to modify framework.apk to change the status bar and stuff like that, I also edited settings.apk to match and added some apps into system apps. Anyway my point is would anyone be interested in turning this into a custom rom? Would people want to flash it? The idea is to have all the stablity of stock with better looks and features. We could call it 'StockMod G5' or something. Good idea? Bad idea? Leave your comments below on what you think, it might be stupid I don't know
Ur just trying to make a custom rom based on stock!..its a good idea no doubt
Sent from my GT-I9103 using xda app-developers app
venkatraman said:
Ur just trying to make a custom rom based on stock!..its a good idea no doubt
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Thanks, wasn't sure if I was goin mad or not :silly:
I think I'll start workin on it then, might start a thread and see if anyone has any good ideas to throw in, base it of the stock 2.2 rom
Nice..waiting for updates from u now
Sent from my GT-I9103 using xda app-developers app
venkatraman said:
Nice..waiting for updates from u now
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Great, I'll open up a new thread for downloads, etc and start workin :fingers-crossed:
How far are you on with this ill flash it straight away, IV commented on your other thread
Sent from my GT-S5830 using xda premium
I'm just getting started, I've got some of the system apps modded and some of the framework like tge statusbar... Should be finished by the end of January
Sent from my GT-I5500 using xda app-developers app
Any updates?
Sent from my GT-I9103 using xda app-developers app
venkatraman said:
Any updates?
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Hi Venkatraman, this rom will most likely be updated in early February, I have like 1 test build but its not complete and I have but development of it on the side as I am launching another rom in January based on CM7.2. When my 7.2 rom is lauched I'll go back and finish this

[Q] what is this semaphore

OK so I know how to flash a new ROM on normal recoveries on my gs3, my sister who has a gs1vibrant, wants me to update her from parano1dandro1d to cm10.1 I have all the required downloads done. Then I go into recovery and it looks very similar except it has a few more options and other differences and it says semaphore cwm recovery v6.0.1.5. My question is: can I still flash as normal with this recovery? Many thanks
Sure you can. But! You're in wrong section!
Here they come.
Sent from my SCH-I535 using xda premium
Wow. This is a little sad.
Sent from my SGH-T999 using xda app-developers app
Everyone be nice
Let's be honest, we wait for threads like this to be started so we can break out our latest face palm meme's etc.
Sent from my SCH-I535 using xda premium
samsgun357 said:
Let's be honest, we wait for threads like this to be started so we can break out our latest face palm meme's etc.
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
You my friend has it all..... Right.
Sent from my Galaxy [color=''blue'']S[/color] III[/color]
Wait, my turn
Running Pa#*ion 13.1 RC and Lovin' It

[Q] Cleanrom lidroid setting

Anyone know how to get the lidroid apk and toggles from Cleanrom ace on to Cleanrom Verizon lovers. I like the Verizon lovers but would like to have all the toggles available in the ACE edidtion..
If you are familiar with ROM building, it should be a simple transfer of system apps and permissions.
Sent from my SCH-I605 using xda app-developers app
SuperDefcon5 said:
If you are familiar with ROM building, it should be a simple transfer of system apps and permissions.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Im kinda a noob at this. Rom building isn't my strong suit. Yet!
There are plenty of guides about custom ROM building but the best way is to download CM10 copy it to your desktop and open it up with win rar and just look inside it. That's primary how I learned
Sent from my SCH-I605 using xda app-developers app
SuperDefcon5 said:
There are plenty of guides about custom ROM building but the best way is to download CM10 copy it to your desktop and open it up with win rar and just look inside it. That's primary how I learned
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
That's a good idea I think I just might give it a try got nothing to loose..
As long as you back up and don't touch boot.img or the kernel, you should be good.
Sent from my SCH-I605 using xda app-developers app

Lost the status bar/recent apps...

i got a stock rom, and i wanted a transparent status bar, so i flashed a new systemUI, and i lost the status bar/recent apps, i got the original systemUI apk, but i cant install it...any help?
Sent from my GT-I9300 using xda app-developers app
fk.xd said:
i got a stock rom, and i wanted a transparent status bar, so i flashed a new systemUI, and i lost the status bar/recent apps, i got the original systemUI apk, but i cant install it...any help?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Happened to me before when I did flash the wrong status bar for the firmware version or odex/deodexed version.
You can try a dirty flash of the stock rom without wiping data or moving the SystemUI.apk into the appropriate folder, give the permissions correctly and restart the phone (not sure if this would work though).
yeah actually i thought about that..but im keeping that option for last xD...how did you solve the problem?
Sent from my GT-I9300 using xda app-developers app
fk.xd said:
yeah actually i thought about that..but im keeping that option for last xD...how did you solve the problem?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I did a dirty flash as I did not backup my systemui
Sent from my GT-I9300 using xda app-developers app
hmm do you have a link with some instructions, im trying to find one, but no luck :/
Sent from my GT-I9300 using xda app-developers app
fk.xd said:
hmm do you have a link with some instructions, im trying to find one, but no luck :/
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
for what? flashing a rom? have a look in the general section's stickies, there is a guide on how to.
If you have a nandroid backup just restore.
Otherwise reflash your rom and restore data.
just move the original systemui to /system/app and set the correct permissions.
and if you should have a backup if you followed the instructions
i dont have a backup :/
how do i fix permisions??
Sent from my GT-I9300 using xda app-developers app
google it
i feel a bit stupid...i cant find it! :/
Sent from my GT-I9300 using xda app-developers app
ok i could realy use some help with this permission problem
Sent from my GT-I9300 using xda app-developers app
http://lmgtfy.com/?q=how+to+set+permissions+in+android
All done! thank you very much for your help ))
Sent from my GT-I9300 using xda app-developers app
please search next time, it's not that hard

Categories

Resources