My X10 mini pro`s touch lags and stops when I slide my keyboard but the device still works cause power button and back ..etc still working but the touch doesn`t respond at all until I reboot the device and not let the keyboard open, I always use that keyboard as the screen is too small so if anyone knows how to fix that help me, please.
Kariem said:
My X10 mini pro`s touch lags and stops when I slide my keyboard but the device still works cause power button and back ..etc still working but the touch doesn`t respond at all until I reboot the device and not let the keyboard open, I always use that keyboard as the screen is too small so if anyone knows how to fix that help me, please.
Click to expand...
Click to collapse
The ribbon that connects your screen to the rest of the phone may be broken. You may have to replace that.
SmG67 said:
The ribbon that connects your screen to the rest of the phone may be broken. You may have to replace that.
Click to expand...
Click to collapse
I`ll try this.. thank you
Related
I have my freinds cingular 8525 and hw keyboard just died after few weeks of use , didnt do any flashing , simply doesnt respond to any bottons , anyone had an issue like that ? when keyboard opens screen rotates ,but bottons dont respond , could it be hw issue ? i also noticed when cable pluged in light on keyboard comes on in about 15 sec , so seem like power to keyboard is still there.
Any input on that would be nice
Hitec Wireless
Hitec Wireless said:
I have my freinds cingular 8525 and hw keyboard just died after few weeks of use , didnt do any flashing , simply doesnt respond to any bottons , anyone had an issue like that ? when keyboard opens screen rotates ,but bottons dont respond , could it be hw issue ? i also noticed when cable pluged in light on keyboard comes on in about 15 sec , so seem like power to keyboard is still there.
Any input on that would be nice
Hitec Wireless
Click to expand...
Click to collapse
Try a hard reset, if that does not work send it back under warranty.
please only helpfull replys
would you think that I didn't try that ?
Guys please if someone has constractive advise than reply, cause if we could send it back we would ,my friend isn't Cingular castomer ,so advise to send it back isn't an option.
Hitec
That was a helpful reply: you have a hardware failure.
edit:
you could try taking it apart and re-seating the kbd ribbon cable. Dis-assembly instructions are in the Wiki
Hi can anyone please help me my htc prophet touch screen is dead and it boots but am on WM 6.5 so the lock screen comes up is there anyway i can bypass it? If not any ideas that can help? thanks in advance oh the phone is on but no light on screen and touch will not work am stuck on the unlock screen lol
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
lyndel4 said:
Oh never mind i used mymobiler to get in but the screen there is no light is there anyway to fix this? becouse i cant see anything on the screen plz help
Click to expand...
Click to collapse
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
bikertibi said:
If the backligt is not damaged you can go to start->settings->System->Backlight and change backlight level. You can view items from the display with an external light iluminating the screen. If is damaged try to dezassembly and check first display connectors... and if are ok you have to replace the display.
Click to expand...
Click to collapse
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
MAZAR SCIENTIST said:
try to click on the middle of the screen for many several times and click on the whole screen till u get response and don't make the phone in hot weather or make it make friction with anything !!
Click to expand...
Click to collapse
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
lyndel4 said:
Thanks alot got thought and disabled the lock screen but it seems my touch screen is working but its all wrong the calibration/ screen alignment is incorrect is there anyway I copy a file from a working prophet and put it in my phone one that has good calibration/ screen alignment will it work?
The touch screen works when I touch some places on the screen but the touch input is incorrect when I touch the screen the woung application opens anyway to fix it o my screen will click on the right place?
Click to expand...
Click to collapse
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
bikertibi said:
If only the calibration is your problem, then try to restart calibration aplications from Settings->System->Screen->Align Screen using hardware keyboard. Calibration data are registry keys..
Click to expand...
Click to collapse
Wait sorry I dont understand what you mean because if I try to use the Align Screen I will get no were it wont work but you said its the registry right so what do I have to put in the registry so that it would Align it self and will be user able plz tell me thanks
hope anyone knows the answer!!
my phone (TMOUSA) is not unlocking after it goes on standby.
i had try 3 different ROMs and it still doing the same, task 29 on every flash,
one of them the 3.14 TMOUS stock ROM tried 2.15 and 2.14 radios and nothing
if i do a soft reset it will boot up ok and i can play with the phone an do calls and all but when it goes on standby and and try to unlock (seeing the actual unlock screen and slider) it do nothing, like the screen isn't working or unresponsive to touch
*battery pins ok
*powered phone without sim and without storage card but still doing the same thing
any ideas???
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
kawazaki said:
The same problem .. over and over with no solution :
http://forum.xda-developers.com/showthread.php?t=830562&highlight=Screen+Unresponsive
And
http://forum.xda-developers.com/showthread.php?t=822777&highlight=Screen+Unresponsive
Click to expand...
Click to collapse
the firs link is the only one with the same problems im having, touch screen works but not after it goes on standby or if the phone go on standby by it self and i press any other bottom (not the end bottom) it will still works
everyone thinks is a hardware thing but how is the touch screen actually working for me? not like second link where the touch don't work at all
mine works but if i press the end key to make it go standby and press it again it become unresponsive, but if it goes to stand by by itself and i press any other key it will still works
well.... i guess we'll never know
probably my hd2 will go to the broken i might use it to fix any other thing drawer
Aaah.. FML
I just woke up, and ive got the same problem...
Can some1 help me where i can find the stock rom for vodaphone??
im gonna bring it back
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
palalisimo said:
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
Click to expand...
Click to collapse
Sounds like the digitizer was inverted somehow when the screen was replaced.
Sent from the i777
palalisimo said:
Hello!
I recently changed a cracked display on my l7777.
When I turn on the phone everything works just fine, including all tests using *#0*#.
But if I lock the screen or it locks itself after some time, the screen is upside down, really bright, and the touch inputs are reversed, for example to pull down the top bar, you have to drag from the bottom. Also sometimes crashes the *#0*# test or it shows failed.
Im not sure what is causing this, I tried apps that force the screen to certain rotation, but they barely work and the touch inputs are still reversed.
Sadly I only have access to limited technical support (I live in Bolivia) but I was wondering if there is any way to fix this, if the phone works perfectly on start up, maybe someone knows how to remain like this, what happens when the screen is locked?
Thank tou very much in advance for any help
Click to expand...
Click to collapse
SteveMurphy said:
Sounds like the digitizer was inverted somehow when the screen was replaced.
Sent from the i777
Click to expand...
Click to collapse
I would say, go back to the tech that replace it for you and tell them to fix it at no charge. But if you were the one that did it, I would suggest to go to someone that know how to do it.
BeenAndroidized said:
I would say, go back to the tech that replace it for you and tell them to fix it at no charge. But if you were the one that did it, I would suggest to go to someone that know how to do it.
Click to expand...
Click to collapse
Thank you, is there any way I can check if this is what has happened?
I cant take it back, Im afraid they could make more damage, and there is no good tech service near me, I have searched a lot.
Is there any way I can do this myself?
I was hoping that since everythings works ok until the screen locks, there may be a software fix for me.
You can do the repair yourself. I'm sure you can find a YouTube video to walk you through it. It might be worth it to tear it down and then rebuild it so you can make sure all the connections are secure and nothing is binding. There is not a lot of space inside, and it's easy to bind the ribbon cable.
Good luck!
Hi, same thing happen to me. Could you fix it?
Hello,
I have a very strange problem with my Xperia Z2. After unlocking the display on the device is blank. You can see the brightness, the touch works, because when I swipe my fingers I can hear android sound but there is no picture. I must do "lock - unlock" pattern 3-4 times, sometimes even more to get the display work properly. I tried to fix it by using software repair but it didnt work, and also
factory reset. Its just so iritating, I cant even lock my phone anymore, I try to keep the display on as much as possible if someone trys to call me so I can answer it. Device is currently running on Existenz ROM but the issue started on the stock so I flashed custom rom but it didn't help. So this is probably a hardware problem and if it is, what could be broken ( is it display, GPU,whatever ) or it could be a software problem ? Any help would be appreciated.
Can you see your lockscreen?
iXaidyiu said:
Can you see your lockscreen?
Click to expand...
Click to collapse
No, no the "lock-unlock pattern" is reffered to simply pressing the unlock button on the phone. There is just blank display and light is on as I mentioned but no picture. After pressing button many times the picture finaly comes and then it's normal. It only happens when phone goes to sleep mode or after I lock it.
If your phone reboots can you see the SONY logo and the boot animation as well?
iXaidyiu said:
If your phone reboots can you see the SONY logo and the boot animation as well?
Click to expand...
Click to collapse
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
mby RIP graph.. try flashtools..
YamyYugi said:
mby RIP graph.. try flashtools..
Click to expand...
Click to collapse
It's probably hardware, now it's just a question of repair cost and is it worth it ?
TechCODE said:
Nope, there is nothing. Just a sound and LED works, and blank screen. Then again, when the phone finally reboots, pressing lock-unlock button will do the trick. It seems like, when I dont touch the phone longer time, it's harder to get screen on. But when I constantly work with the phone there is no need for that amount of "lock - unlock button move".
Click to expand...
Click to collapse
I think this is due to a faulty LCD screen, but the digitalizer seems fine. So maybe you could consult some local repair shops and prove if my hypothesis is correct. But first of all you should try also flashing another kernel (eg elite kernel) first to see if it is a software issue rather than a hardware issue.
Sent from my Sony D6503 using XDA Labs