I tried to install CWM recovery by flashing the zip file in TWRP. It seemed to have flashed fine, but I cannot get into recovery now. When I try, the screen "flashes" and "flickers" a few times before going black. I've used odin to install the .tar file that I originally used to root the device and in goes through the process just fine. However, when I pull the battery and try to go into android stock recovery, it does the same thing ("flashes & flickers and then goes black"). When I try to boot the phone as normal (not into recovery) it boot loops between the blue samsung swirl and the verizon 4g logo.
I was on cleanrom 4.7 if that helps at all. I would greatly appreciate anyones assistance concerning this matter.
Edit: Found a .tar file for TWRP and was able to load it through ODIN. Once into TWRP I was able to restore a backup I made earlier today. Thought I would edit the post in case someone ran across the same problem.
Romans8vs1 said:
I tried to install CWM recovery by flashing the zip file in TWRP. It seemed to have flashed fine, but I cannot get into recovery now. When I try, the screen "flashes" and "flickers" a few times before going black. I've used odin to install the .tar file that I originally used to root the device and in goes through the process just fine. However, when I pull the battery and try to go into android stock recovery, it does the same thing ("flashes & flickers and then goes black"). When I try to boot the phone as normal (not into recovery) it boot loops between the blue samsung swirl and the verizon 4g logo.
I was on cleanrom 4.7 if that helps at all. I would greatly appreciate anyones assistance concerning this matter.
Edit: Found a .tar file for TWRP and was able to load it through ODIN. Once into TWRP I was able to restore a backup I made earlier today. Thought I would edit the post in case someone ran across the same problem.
Click to expand...
Click to collapse
My first time through a bootloop I ran into the same issue and had the same fix.
Related
I've tried flashing over and over, and keep getting stuck at the white HTC splash screen after flashing cm7!?!
I've tried flashing through RM and manually.
What I've done:
Downloaded MR2.5 Radio, renamed to PG05IMG.zip, put on root of sd, reboot to recovery, updated it. Booted into my current rom (Gingeritis 3D) and had a signal and everything. So I renamed the PG05IMG to MR2.5-PG05IMG.zip.
So I rebooted into Recovery, did factory reset, wiped dalvik cache, cache partition, and then went to install zip from sd, and went to the Zoom kernel I had downloaded (which I was told works with CM7),
I then did the same thing with the CM7 update rom image which is: update-cm-7.1.1-Thunderbolt-signed.zip
(I have it in a folder called ROMs, is that ok? or does it need to be on the root while flashing?)
I then reboot, and it doesnt ever get past the white HTC splash screen.
I've done it 3 times, making sure everything is wiped, etc and still get the same thing.
What am I doing wrong?
Can someone give me a link to a CM7/Kernel/radio combo they KNOW works???
I don't know what else to try.
I've Googled it, and found lots of people with the same issue, but find no solutions....
I had been doing everything right, but it seems Clockwork Mod Recovery was corrupt or something.
What I did:
I restored back to my last backup.
Opened Rom Manager
Click "Flash Clockwork Mod Recovery" (the top one, even if it says your up to date)
after it flashes CWM successfully, either download and flash a rom from Rom Manager, or do it manually as I did.
And after the flash, I rebooted, and it went right to the CM7 boot animation, and loaded perfectly.
If you were like me and searched google, and found lots of posts with the same issue, but no solutions. So I hope this helps others.
Thanks for all the help guys!
(goes to show sometimes you just gotta try anything and everything)
Did you flash the radio in recovery? Nooooo thats not how you do it. Rename it to PG05IMG.zip and place it on the root of your sd card. Turn your phone off. And then turn it back on by holding power and volume down at the same time. it will take you to the bootloader and it will ask you if you want flash the radio. I think that might help
Sent from my HTC Mecha using Tapatalk
I have been trying to get my rooted Galaxy Nexus to load the CWM Touch recovery image, and I just can't seem to get it to stick. I originally just tried to install the basic non-touch version from Rom Manager. When it rebooted, I got the red ! and a dead robot. So I booted into fast boot, and flashed the touch recovery. After flashing if I go straight to recovery, I do get the CWM recovery and can backup. My problem is that if I the reboot the phone, I can never get back to it again. I always end up at the red ! and a dead robot.
I read on another thread to rename the file "/recovery-from-boot.p" to "recovery-from-boot.p-bak" and that it might require reflashing the image. I moved this file and re-named it, reflashed, booted into android. Then powered off and booted into recover mode, just to see the red ! again.
It seems that when I first flash I can go into it, but anytime after that it just dies. Anyone have a deeper knowledge of what is going on here and care to point me in the right direction? I could probably just go ahead and flash a new image to the phone but I don't feel good doing that while the recovery image seems to need re-imaging every time.
Hi there,
You're correct, you need to rename/delete that file to make cwm stick on the nexus.
If you reboot the phone before removing that file, the file will update your settings to point to the old recovery instead of cwm.
Since you've just renamed it, reinstalling cwm should do the trick.
You're renaming the wrong file. You need to rename or delete install-recovery.sh from system/ect
Hi folks, mid last week I woke up to a non responsive Galaxy S2. It's been happily running stock Vodafone ICS for over a year, and somehow spontaneously went soft brick on me. Gets stuck at logo screen or goes into boot loop.
Download mode is accessible. I can flash through Odin (1.85 and 3.09) and it reports success. I have successfully put CWM (various versions) on it can can boot into them fine.
Recovery mode is also accessible and appears to be working fine. I can access external SD card no problem.
Attempting to flash through zip from external SD aborts with Mode 7, reporting bad zip or unable to read source file. I have tried removing asserts from install script (educated myself to the risks and made sure the ROM was correct!!) and multiple versions of CM (10.1.3 stable, 10.2 nightly) and multiple versions of CWM recovery (6.0.2.9 is what I've been using mostly, as recommended by CM guide)
Tried running GS2ROMNukeV2.12.zip which reported successful wipe, then attempted zip install from SD with same result (aborted mode 7). Repeated wipe and attempted stock (I9100TDVLSK_I9100THUTLSD_I9100TDVLS3_HOME.tar) from flash through Odin. Reported success, phone booted into recover and applied KOR CSC successfully, then reboot and still stuck at logo screen/boot loop.
I have attempted the fix in http://forum.xda-developers.com/showthread.php?t=1449771 as best I could wish the resources I could find, but it's hard to follow to the letter with the links broken!!!
I have not tried repartition with PIT as I'm not sure where to get an appropriate PIT file. Advice on this appreciated!
I want to make this clear because people seem to not want to believe it: I did not soft brick my phone flashing it. My best theory at this point is some kind of memory corruption or hardware failure that's causing a boot loop. Any help or suggestions would be appreciated. This week I will probably take it in to a repair shop and hope for the best, but tomorrow is a public holiday and I've got nothing to lose by trying any more suggestions.
Kaine said:
Mode 7
Click to expand...
Click to collapse
If memory serves me right this is due to an old version of Recovery, i had the same thing, updated recovery and it flashed zip fine. just as you know. :fingers-crossed:
I was being a total dumbf**k yesterday and screwing with my Galaxy Player 5.0 to install Lollipop. I installed it, but I couldn't install Gapps, so I used ODIN tonight to attempt to restore it. Problem was, I installed the kernel in the Bootloader section, not the PDA section. I finally ended up installing it, however the boot animation is endless now. It only plays the sound at first bootup, then it shows the normal boot screen endlessly. Anyone help me as a stupid guy doing stupid things?
EDIT: I just installed Entropy's Daily kernel over it, however that did nothing. Also, I can not get to recovery AT ALL. In fact, I'm holding the button combo right now!
Can you access the Bootloader Menu on your YP - G70 ('DOWNLOAD Mode')?
superblox02 said:
I was being a total dumbf**k yesterday and screwing with my Galaxy Player 5.0 to install Lollipop. I installed it, but I couldn't install Gapps, so I used ODIN tonight to attempt to restore it. Problem was, I installed the kernel in the Bootloader section, not the PDA section. I finally ended up installing it, however the boot animation is endless now. It only plays the sound at first bootup, then it shows the normal boot screen endlessly. Anyone help me as a stupid guy doing stupid things?
EDIT: I just installed Entropy's Daily kernel over it, however that did nothing. Also, I can not get to recovery AT ALL. In fact, I'm holding the button combo right now!
Click to expand...
Click to collapse
Hey, did you manged to fix your galaxy player? because i'm trying to fix mine, we are basically in the same situation
Lollipop, then flashed the stock rom, and then nothing
superblox02 said:
I was being a total dumbf**k yesterday and screwing with my Galaxy Player 5.0 to install Lollipop. I installed it, but I couldn't install Gapps, so I used ODIN tonight to attempt to restore it. Problem was, I installed the kernel in the Bootloader section, not the PDA section. I finally ended up installing it, however the boot animation is endless now. It only plays the sound at first bootup, then it shows the normal boot screen endlessly. Anyone help me as a stupid guy doing stupid things?
EDIT: I just installed Entropy's Daily kernel over it, however that did nothing. Also, I can not get to recovery AT ALL. In fact, I'm holding the button combo right now!
Click to expand...
Click to collapse
You need to boot into download mode then flash the stock ROM with odin.
Then boot into recovery mode and do a factory data reset and cache wipe.
If it still does not work try flashing the stock ROM with the pit file.
Both the ROM and pit file can be found here:
http://forum.xda-developers.com/showthread.php?t=2192488
Androprise said:
You need to boot into download mode then flash the stock ROM with odin.
Then boot into recovery mode and do a factory data reset and cache wipe.
If it still does not work try flashing the stock ROM with the pit file.
Both the ROM and pit file can be found here:
http://forum.xda-developers.com/showthread.php?t=2192488
Click to expand...
Click to collapse
Thanks, but I realized how stupid I was being and got it resolved relatively quickly
edoardog said:
Hey, did you manged to fix your galaxy player? because i'm trying to fix mine, we are basically in the same situation
Lollipop, then flashed the stock rom, and then nothing
Click to expand...
Click to collapse
When you flash the stock ROM, wait until you get to endless boot, then power off your device. Hold Up+Power until you see the Samsung logo. Go to Wipe data/factory reset, wipe, then restart your device. It's because the partitions aren't formatted, so no temporary data can be stored on the /data partition until you factory reset and it formats /data and /cache.
So I tried TWRP and have had extremely bad luck. I thought I bricked the phone at first, then it was stuck in a boot loop, THEN TWRP could not read from the internal memory, and to top it off, when I finally got the phone to boot up, I went ahead and bought a sim card and got it hooked up to ATT, and when I inserted the sim card, it automatically rebooted the phone into TWRP and reset everything (deleting all my apps and stuff) and got stuck in a boot loop.
I had an old phone and used clockwork mod recovery without any issue. Does anyone know where to find a CWM recovery image for the z5 compact?
Actually, if anyone has even the STOCK recovery I would be forever grateful. I would rather stock than TWRP at this point. I don't want to risk my phone being reset and having everything deleted again.
Same issue, unable to boot rom, TWRP has no access..
thegreatyashu said:
So I tried TWRP and have had extremely bad luck. I thought I bricked the phone at first, then it was stuck in a boot loop, THEN TWRP could not read from the internal memory, and to top it off, when I finally got the phone to boot up, I went ahead and bought a sim card and got it hooked up to ATT, and when I inserted the sim card, it automatically rebooted the phone into TWRP and reset everything (deleting all my apps and stuff) and got stuck in a boot loop.
I had an old phone and used clockwork mod recovery without any issue. Does anyone know where to find a CWM recovery image for the z5 compact?
Actually, if anyone has even the STOCK recovery I would be forever grateful. I would rather stock than TWRP at this point. I don't want to risk my phone being reset and having everything deleted again.
Click to expand...
Click to collapse
I am experiencing the same issue. I would like any working recovery/rom at this point. My Wife has the identical phone. Can I make a copy of hers to help the OP and my phone out?
I followed the following;
http://forum.xda-developers.com/z5-compact/development/rom-cyanogenmod-13-sony-xperia-z5c-t3339930
and have tried a few times now. As well as other versions of TWRP..
On a side note I wouldn't mind testing new roms/features being implemented by developers. Please let me know where the best place to get involved would be.
Thanks in advance,
David.
found a boot.img and TWRP that worked for me..
So after a lot of flashing I found one that works.
http://forum.xda-developers.com/z5-compact/orig-development/twrp-z5-compact-t3235161
at least I can get twrp working for now..
I still can not get CM installed. Each time I get 'Error executing updater binary in zip'. I will have to do some more reading tomorrow.